GE 874/EWS-20/2024-25

Amount

Taking down carefully copper/ aluminium unserviceable/ perished point wiring (light, fan, socket or power complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings, removing material from site for taking credit etc and making good disturbed surfaces of wall, floors complete all as specified and directed.

Taking down MCB DB's complete with MCB's/Isolator etc removing materials from site and making good disturbed surface of walls, floors etc. complete all as specified and directed.

Disconnecting unserviceable sub main wiring/service connection of any size and including steel conduit and accessories and removing from site and making good the disturbed surfaces complete all as specified and directed

M & L for Modular point wiring for one light/one fan controlled by one switch with 1.5 sqmm PVC insulated unsheathed multistrand copper conductor FRLSH cable with and including PVC casing capping ISI marked heavy duty for one light fan/bell point controlled by one switch including Modular cover plate and modular metallic flush boxes of suitable way modular boxes and cover plates including PVC green insulated unsheathed 1.5 sqmm multistrand copper conductor FRLS cable as continuous earthwire and connecting to earth duly, complete all as specified and directed. Note: (a) Insulation test of point wiring (b) colour coding is to be maintained .(Ph-Red, N-Black, Half -Yellow, Earth- Green)

All as per srl item No 4 above but MODULAR call Bell point.

All as per srl item No 4 above but MODULAR 3 pin 5 amps socket outlet on the same board with other switch complete all as specified and directed.

All as per srl item No 4 above but MODULAR 3 pin 5 amps socket outlet on independent Board complete all as specified and directed.

All as per srl item No 4 above but MODULAR 15/16 Amps socket outlet on independent board with 2.5 sqmm copper conductor FRLS cable and 2.5 sqmm PVC insulated unsheathed coper conductor cable FRLS (Green Colour) as earth lead complete all as specified and directed.

S&F Modular switch 1 way 6 A, 1 module complete all as specified and directed.

S & F Modular switch 1-way 16A, 1 module complete all as specified and directed.

S & F Modular Socket 6A/16A - 2/3 pin combined 2 modules complete all as specified and directed.

S & F Modular Socket, 6A - 2/3 pin combined 2 modules complete all as specified and directed.

S & F of Modular Bell push 6A 1 module, complete all as specified and directed.

S & F of Modular Fan regulator 6A 1 module, complete all as specified and directed.

S & F in replacement of Modular Metal flush box 3 module, complete all as specified and directed.

S & F in replacement of Modular Metal flush box 4 module, complete all as specified and directed.

S & F in replacement of Modular Metal flush box 6 module, complete all as specified and directed.

S & F in replacement of Modular Metal flush box 8 module, complete all as specified and directed.

S & F in replacement of Modular White cover plate with frame, 3 module, complete all as specified and directed.

S & F in Replacement of Modular White cover plate with frame, 4 module, complete all as specified and directed.

S & F in replacement of Modular White cover plate with frame, 6 module, complete all as specified and directed.

S & F in replacement of Modular White cover plate with frame, 8 module, complete all as specified and directed.

M&L for point wiring for One light /one fan/one bell point controlled by one switch with PVC insulated unsheathed single core multistranded copper conductor 1.5 sqmm, 1100 volts grade cable, FRLSH, drawn through PVC casing caping including accessories and provision of PVC boxes for mounting switches, switch socket, fan regulator, provision of modular terressa plate Irene stripes, No of modules as required on site or as directed by Engineer-in-Charge including one run of PVC insulated unsheathed multistranded copper conductor cable 1.5 sqmm (green colour) earth wire and connected to earth dolly complete all as specified and directed.

All as per item No 23 above but wiring with 1.5 sqmm copper wire ( FR-LS-H) and 1.5 sqmm earth wire for socket outlet 3 pin 5 amps on same board.

All as per item No 23 above but wiring with 1.5 sqmm copper wire (FR-LS-H) and 1.5 sqmm earth wire for socket outlet 3 pin 5 amps on independent board.

All as per item No 23 above but wiring with 2.5 sqmm copper wire (FR-LS-H) and 1.5 sqmm earth wire for socket outlet 6 pin 15 amps on independent board.

S&F switch piano flush button single pole, one way 5 amps complete all as specified and directed.

S & F switch socket combination 2 in 1,5A, flush type complete all as specified and directed.

S & F switch socket combination 5 pin 16A, flush type complete all as specified and directed.

Supply and Fixing in replacement Gang Box 15 Amp Switch socket combined complete all as specified and directed.

Supply and Fixing in replacement Gang Box 5 Amp Switch socket combined complete all as specified and directed.

S&F in replacement Hylum sheet 4x4 to 4x6 inches for fixing of switches sockets including cutting for switch socket and fixing to existing sunken box with brass screw complete all as specified and directed.

S & F in replacement of old unserviceable sheet metal enclosures distribution boards, double door three phase 415 volts 4 ways vertical TPN DB for comprising three phase four wire copper strip bus bar of appropriate capacity complete all as specified and directed and comprising of the following (a)MCCB FOUR POLE 63 AMPS AC 415 VOLTS 25 KA=01 NO as incoming and 12 nos. MCB SP 40 Amps, C series as outgoing (Note . (ii) The DB shall be flush fixed and making good the disturbed surface matching with existing specifications shall be part of job at no extra cost. (iii)connection of the MCCBs/ MCBs with cable shall be made through appropriate size pin /bottle type thimble -properly crimped.(1v) all the vacant holes of the DB shall be provided with blank plates of appropriate size. (v) double continuous earth wire shall be provided for each three phase DB from earthing mains dolly (vi)MCCB's and MCB’s shall have a same make as of DB.

S&F of distribution board single pole & neutral with 200 Amps rated bus bar, for double door IP-42 DB's ,made out of sheet steel enclosure, recessed type, factory made powder coated 4 way -240 volts suitable for housing MCB's and isolator's complete in all fixing material/accessories etc complete all as specified and directed.

S&F of distribution board single pole & neutral with 200 Amps rated bus bar for double door IP-42 DB's, made out of sheet steel enclosure, recessed type, factory made powder coated 8 way -240 volts suitable for housing MCB's and isolator's complete in all fixing material/accessories etc complete all as specified and directed.

S&F MCB's single pole 240 volts 6 to 32Amps 10 KA 'C' curve series complete all as specified and directed.

S & F of MCB SPN, 240 volt, 40 Amp capacity, 10 KA, 'C' curve complete all as specified and directed.

M & L Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendant fittings complete all as specified and directed.

S&F LED, 20 Watts, 4 ft, fittings complete with all accessories for mounting light fittings complete with earth terminal connection, 3 terminal/ PVC/ polycarbonate, isolated body complete all as specified and directed.

S &F LED 34/36 W Panel 2 X 2 Environment friendly, new generation, aesthetically designed, ultra modern recess mounting luminaire with high brightness SMD LEDs light source, suitable for Armstrong/Grid ceiling, all complete all as specified and directed.

S & F LED Recess mounted round shape 12W Slim-Fit low profile downlights are engineered to deliver superior light output and uniformity utilizing the latest edge-lit LED technology at only 25mm deep including bracket, complete all as specified and directed.

S&F LED recess mounted square shape 12 W Slim-Fit low profile downlight are engineered to deliver superior light output and uniformity utilising the latest edge-lit LED technology at only 25mm deep including bracket, complete all as specified and directed.

S & F Surface mounted with motion sensor white/warm as per site requirement round/square shape15 W LED downlighter with powder coated aluminium with integrated electronic driver all complete all as specified and directed.

Supply and fix ceiling rose with earth terminal connection, 3 terminal/ PVC/ polycarbonate, isolated body complete all as specified and directed.

M&L for wiring for circuit/submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/recessed as required in PVC casing caping of size 2x2.5 sq. mm + 1x1.5 sq. mm earth wire complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 60x60cmx6.3 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge lead of the plate not less than 1.5 mtr below normal ground level, connected galvanised earrth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in Electrical plate No 3 connected to earthing test point all as specified or indicated including testing on completion complete all as specified and directed.

S&F 09W/10W Bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size.

Supply and fix LED Bulb 9 Watt complete all as specified and directed.

Supply and fix LED Bulb 12 Watt complete all as specified and directed.

S&F exhaust fan made of sturdy engineering plastic complete with louvers shutter, voltage 230v , 50HZ , RPM 1200, Copper winding of sweep 300mm complete all as specified and directed.

S&F electric water Heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 liter , BEE 5 Star rated complete with all accessories such as safety valve, thermostat, NRV, connection piece etc. complete all as specified and directed.

S&F 1100 volt grade heavy duty cable PVC insulated multistranded/solid aluminum conductor served with PVC tape and over all PVC sheathed in service connections suspended by insulating hangers not more than 1 mtr apart including 4mm dia GI suspension wire one 2 core cable flat or circular of size 16 Sqmm including taking down old service connection and removing from the side complete all as specified and as directed.

S&F in replacement heating element with new one capacity of 1500 Watts (triangle type) for 25 Ltr capacity geysers complete all as specified and directed.

S&F in replacement heating element with new one capacity of 20 All as per srl item No 4 00 Watts (triangle type) for 25 Ltr capacity geysers complete all as specified and directed.

S&F in replacement Thermostat 7''/9" suitable for 25/50 ltrs capacity water geyser with automatic thermal cutout fixed in repair and including testing, complete all as specified and directed.

S&F in replacement copper/Steel Geyser Assembly with rubber packing for 25/50 ltrs capacity water geyser with automatic thermal cutout fixed in repair and including testing, complete all as specified and directed.

M&L rewinding of exhaust fan with super copper enamelled wire with suitable gauge, varnishing, oiling and greasing of any make of size 450 mm sweep by dismantling its parts, capacitor 4 Mfd by replacing petty items such as nuts & bolts, bearing & washers, cleaning of exhaust fan body and its blade by cleaning agent, assembling, and connecting and testing complete all as specified and directed.

M&L for point wiring for one light point/fan point controlled by one switch with 1.5 sqmm PVC (FR-LS-H) insulated un-sheathed copper conductor single core multi strand flexible cable and 1.5 sqmm PVC (FR-LS-H) insulated un-sheathed copper conductor single core multi stranded flexible cable (green colour) as earth lead in and including cable 1100 volts grade including casing and capping (ISI marked) for one light/ fan point including 2nd class hard wood rectangular block open recessed cover with 3mm thick plastic laminated sheet or surface mount PVC shank box suitable for site including cutting chases to wall making good the disturbed surfaces to match with the existing specification complete all as specified.

All as per item No 58 herein before but wiring with 1.5 sqmm copper wire ( FR-LS-H) and 1.5 sqmm earth wire for socket outlet 3 pin 5 amps on same board.

All as per item No 58 herein before but wiring with 1.5 sqmm copper wire ( FR-LS-H) and 1.5 sqmm earth wire for socket outlet 3 pin 5 amps on independent board.

All as per item No 58 herein before but wiring with 2.5 sqmm copper wire ( FR-LS-H) and 1.5 sqmm earth wire for socket outlet 6 pin 15 amps on independent board.

S&F switch piano flush button single pole, one way 5 amps complete all as specified and directed.

S & F switch socket combination 2 in 1,5A, flush type complete all as specified and directed.

S & F switch socket combination 5 pin 16A, flush type complete all as specified and directed.

Supply and fix inverter LED Bulb 10 Watt complete all as specified and directed.

Excavation in trenches not exceeding 1.50m wide and not exceeding 1.50m depth for foundation ,laying of cables/pipes/poles etc., and getting out in hard/dense soil complete all as specified and directed.

All as per item No 66 above but exc 1.50 and n.exc 3.0m deep complete all as specified and directed

Returning filling in including spreading levelling watering and well ramming in layers not exceeding of 25 cm thick in soft/loose soil complete all as specified and directed.

Removal of surplus soil as obtained from excavation to a distance not exc. 50 Mtr and depositing where directed at a level not exc. 1.5 Mtr above the starting point complete all as specified and directed.

Supply and laying dry river sand for cable cushioning in trenches to required width at bottom and top of cable including spreading levelling watering and consolidation complete all as specified and directed. Note:-Punned thickness only shall be measured and paid.

Supply and laying old size brick covering with width equal to length of brick as the mechanical protection to cable with well burnt sub class 'B' laid in trenches flat complete all as specified and directed.

Supplying and fixing, light grade , Galvanised mild steel pipe / tubing, complete with all fittings, laid under roads, drain, paths, fixed to poles/ walls with suitable mild steel clamps , bolts , nuts and washers complete all as specified and directed as for cable protection of following sizes:-. (Note:- Excavation & earth work shall be measured and paid for separately under appropriate item of this schedule ):-

(a) 40 mm bore

(b) 50 mm bore

Taking out old UNSV UG cable of any size Supply, Laying, jointing and testing LT underground cable, heavy duty, 1100 Volts, XLPE insulated and sheathed, armoured with multi-stranded aluminium conductor cable , laid in trenches/ducts or fixed to poles/walls or laid under roads/paths/drains/culverts duly encased in galvanised steel pipe of suitable sizes including cable gland of suitable sizes and aluminium lugs for connection complete all as specified and directed of following size cable.

(a) 10 sqmm 2.0 core

(b) 25 sqmm 3.5 core

(c) 50 sqmm 3.5 core

(d) 70 sqmm 3.5 core

(e ) 95 Sqmm 3.5 core

M&L for restretching of LT /HT ACSR conductor and GI wire of any size and on any type of poles carrying upto six conductors in a span including disconnecting from insulator and rewinding to insulator after stretching with and including aluminium wire including re-fixing/re-adjusting line spans, line separators, cross arms on poles complete all as specified and directed.

Cutting /Trimming/ Chopping of tree trenches along the overhead lines upto 3 m from elect lines clearance on both sides of HT/LT lines and disposing off the cut tree/ branches site to a distance not exc. 50 m and clearing the site complete all as specified and directed.

Material and labour of repair unserviceable LED Street Light/ Security Light of 25 to75 Watts, including replacement of driver with a new driver (having surge protector and lightning protector) with input Voltage variation between 140V to 300V (voltage in this region will not be considered as surge voltage), with after complete all as specified and directed.

S&F of suitable LED driver (having surge protector and lightning protector) with input Voltage variation between 140V to 300V (voltage in this region will not be considered as surge voltage) for LED Street/ security Lights upto 25 to 75 Watts, with warranty of two years.

M&L in replacement of ACSR conductor of any size and any type including stretching, fixing and binding to insulator on OH LT line service feeders all as specified including aluminium binding wire or aluminium tapes complete all as specified. This item includes all consumables (such as binding wire and replacement insulators and cross arms, etc., for replacement of damaged ones found after/ during replacement process).

S&F of MCCB 160 Amp 4 Pole 415 Volt breaking capcity 16kA complete all as specified and directed.

S&F of MCCB 200 Amp 4 Pole 415 Volt breaking Capacity 16kA complete all as specified and directed.

S&F of MCCB 250 Amp 4 Pole 415 Volt breaking Capacity 25kA complete all as specified and directed.

S&F of MCCB 400 Amp 4 Pole 415 Volt breaking Capacity 36kA complete all as specified and directed.

Supply and fixing of 100A busbar chamber (wall mounted) Busbar made of ETP Grade copper 6 way complete all as specified and directed.

S&F of on load changeover switch 415 volt in sheet metal enclosure 4 pole of capacity 100Amp (as required) complete all as specified and directed.

S&F of on load changeover switch 415 volt in sheet metal enclosure 4 pole of capacity 160 Amp (as required) complete all as specified and directed.

S&F of off load changeover switch with handle 415 volt in sheet metal enclosure 4 pole of capacity 160 Amp (as required) complete all as specified and directed.

S&F of off load changeover switch with handle 415 volt in sheet metal enclosure 4 pole of capacity 320 Amp (as required) complete all as specified and directed.

M&L for Painting to LT poles, 9 mtr with cross arms, bracing and clamps with one coat of synthetic enamelled paint over one coat of red oxide primer including scrapping the old paint carefully to make smoothen complete and painting strips of red and black from foot of pole upto 5 feet each strip of 30 cm height complete all as specified and directed.

S&F in replacement of Cross arms, bracing, supports clamps and back plates, fabricated from structural steel sections including nuts, bolts, washer, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed including one primer, one under coat and one finishing coat of aluminium paint over prepared steel surface complete all as specified and directed.

M&L in replacement of Shackle type, porcelain, vitreous, white, brown or green insulators for working pressure 1100 volts grade, 90 mm dia 75 mm height including galvanized mild steel straps of 31 x 3 mm size, 12 mm dia insulator bolts, washers and nuts complete all as specified and directed.

M&L in replacement of Pin type porcelain vitreous white brown or green insulator including one galvanized mild steel spindle, two galvanized iron, washers and one galvanized iron nut, 100 mm height, 65 mm dia for 1100 volt grade complete all as specified and directed.

S&F self adhesive electrical insulation tape of size 2.5cm x 25m x 0.125mm, ISI marked complete all as specified and directed.

Supply and fix street light Engineering plastic one piece moulding control box with locking arrangement made out of HDPE and FI clamp 25 x 3mm complete of dimensions in CM +/-10%(34x28x13) including MCB SP 6 Amp 240 Volts complete with 02 Nos aluminium busbar or terminal two Nos (2P-R/Y/B and N) of rating 63 amps for single phase and neutral on porcelain based insulators complete all as specified and directed.

Supply, erecting and fixing the true vertical position, steel tubular swaged pole(410 SP-31),09 mtr long, complete with cast iron base plate, pole cap/final taper plug ,bolts, nuts and washers, welded reduced section and longitudinal weld throughout entire length of pole ,including two coats of black bituminous paint externally upto planting depth and remaining exterior portion of pole shall be provided with one coat of red oxide primer and two coats of aluminium paint complete all as specified and directed.(Numbering of the poles shall be done with synthetic enamelled painted letter of shape & size complete all as specified and directed. Note:-(a) Cost of numbering of pole shall deemed to be included in unit rate. (b) Excavation, Earth work and PCC foundation will be measured and paid for separately.

S & F GI bracket made out of GI pipe light grade of size 40/32 mm 1.2 m long cut to length bend to the required shape and 02 Nos mounting flat iron clamps size 40mm x 6mm, 04 Nos hexagonal bolts 10mm dia 100mm long with nuts and washers complete all as specified and directed.

Supply and fixing LED street light luminaries 70/72 Watt having shall be made of single piece Aluminium Die cast with powder coated in RAL-7032 shade with heat distribution fins on housing with UV stabilized toughened glass cover and should have secondary lens on each LED for better light distribution .The system luminaire efficacy should be > 110 LM/W with high power LED, with efficiency > 85 % frequency 50 HZ, Operating voltage range 120V-270V,current not more than 0.320 Amp, PF 0.95, THD (I) < 10 %, supported with 5 KV internal and 10 KV external SPD, Humidity 10% to 90 % RH, working temperature - 20⁰ C to 50⁰ C lige expectancy of LED should be 50000 burning hours with minimum 70 % initial lumen maintained, CRI >70 complete all as specified and directed.

M&L for plain cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) in foundation of PCC poles/struts as specified including necessary form work, complete all as specified directed.

M&L for plain cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) in foundation of stay assembly etc including necessary form work, complete all as specified & directed.

M&L for plain cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) for coping around poles, including necessary form work finishing even and smooth without using extra cement, complete all as specified & directed.

Supply and connecting 1100 volts grade heavy duty cable with PVC insulated solid aluminium conductor served with an inner sheathing of PVC tape and overall PVC sheathed of size 2.5/4 sqmm 3 core for pole box to street light fitting complete all as specified and directed.

S&F 1100 volt grade heavy duty cable PVC insulated multistranded/solid aluminum conductor served with PVC tape and over all PVC sheathed in service connections suspended by insulating hangers not more than 1 mtr apart including 4mm dia GI suspension wire one 2 core cable flat or circular of size 10 Sqmm including taking down old service connection and removing from the side complete all as specified and as directed.

Supply and fix in replacement LED flood/ focus light 60 W made up of pressure die cast aluminium housing toughened glass and high power LEDs and secondary lenses with IP 66 protection. Option for 3000k. 10 KV SPD included complete all as specified and directed.

S&F LT PVC line separator for outdoor for pole 4 wire complete all as specified and directed.

S&F LT PVC line separator for outdoor for pole 2 wire complete all as specified and directed.

Taking up or down old steel tubing and connections with fittings including cleaning for refixing or removal to store of following sizes pipe complete all as specified and directed.:- NOTE :- Excavation and earth work shall be measured and paid separately

(a) 80 mm bore

(b) 50 mm bore

(c) 40 mm bore

(d) 25 mm bore

(e) 20 mm bore

(f) 15mm bore

Ref fixing /relaying old steel tubing and connection in new or old position including fittings as required (in trenches, Walls, Ceiling, Floors etc) of following sizes pipe complete all as specified and directed.

(a) 80 mm bore

(b) 50 mm bore

(c) 40 mm bore

(d) 25 mm bore

(e) 20 mm bore

(f) 15mm bore

Supply and Laying in trenches GI tubing "medium" grade in new or old direction including necessary screwing and all fittings (Tee, union, nipple, reducer, elbow etc) as required at site complete as specified and directed for the following sizes pipe :-

(a) 80 mm bore

(b) 50 mm bore

(c) 40 mm bore

(d) 25 mm bore

(e) 20 mm bore

(f) 15mm bore

Supply and Laying in trenches High density poly[1]ethylene pipes (HDPE) of pressure rating 6 kgf/cm2 laid in trenches including necessary screwing and all fittings (Tee, union, nipple, reducer, elbow etc) as required at site complete as specified and directed.

Supply and replacement of 4 sqmm 3 core submersible copper conductor flat type for submersible pump complete all as specified and directed.

Supply and replacement of 6 sqmm 3 core submersible copper conductor flat type for submersible pump complete all as specified and directed.

Supply & Replacement Gun metal gate valve with iron wheel head, both end screwed for iron pipes of the following sizes complete all as specified and directed.

(a) 50 mm bore

(b) 40 mm bore

(c) 25 mm bore

(d) 20 mm bore

Supply only Alum Ferric grade IV for water treatment complete all as specified and directed.

Supply only calcium Hypochlorite based bleaching powder (with no quantity of Potassium Hypochlorite) having minimum chlorine content of 65% in granular and tablet form for water disinfection. Make Rayalaseema, Altoch, Potterwatt or Aquafit complete all as specified and directed.

S&F in replacement 20 HP Star delta fully automatic star-Delta starter (ASD) complete all as specified and directed.

S&F in replacement starter for submersible pump 2 HP complete all as specified and directed.

S&F in replacement starter for submersible pump 10 HP complete all as specified and directed.

Taking up or down cast iron sluice valve of any make and type of 80 mm bore complete all as specified and directed.

S&F, testing and commissioning Cast iron sluice valve 80 mm bore of class PN 1.0 ISI marked confirming to IS 14846 both ends flanged with iron wheel head and stainless steel spindle Make : Kirloskar or equivalent make as approved by GE non rising type including necessary jointing material like nuts bolts and washers, rubber gasket complete all as specified and directed of the following sizes :-

Demolition of stone masonary built in cement/lime mortar complete all as specified and directed.

M&L for walling of random rubble uncoursed wall bonded built in cement mortar 1:6 complete all as specified and directed.

M&L for rendering 10 mm thick in cement mortar 1:6 on stone masonary surfaces for finished fair & even complete all as specified and directed.

M&L for PPC 1:3:6 as in coping including form work etc required with 20mm graded stone aggregate complete all as specified and directed.

Supply and fixing of Angle iron/MS flat/MS sheet of required size and shape including cutting bending to the shape making holes, for valve pit cover, clamp, stay assembly etc with locking arrangement with two coat of black synthetic enamelled paint over a coat of red oxide primer complete all as specified and directed.

S&F NRV and S&F CI reflex valve (NRV) with by pass arrangement suitable for 100mm dia size flanged joints complete with nut bolt & washer confirming to IS-5312 PN 1.6 complete all as specified and directed.

All as per item No 124 above but of size 80mm dia complete all as specified and directed.

S&F foot valve and Supply and fixing new CI foot valve flange ends including nut bolt and washer confirming to IS 4038 of size 100mm dia

All as per item No 126 above but 80 mm dia complete all as specified and directed.

M&L for lagging to pipes 20mm bore used in internal water supply or plumbing all round with 25mm thick bonded mineral wool preformed 'SNAP ON' pipe sections of density 144Kg/Cum conforming to IS-9842 provided with chicken mesh wire netting 25 gauge, 20mm mesh and covered with 0.01mm aluminium foil, complete all as specified and directed.

M&L for Lagging to pipes 25mm bore used in internal water supply or plumbing all round with 25mm thick bonded mineral wool preformed 'SNAP ON' pipe sections of density 144Kg/Cum conforming to IS-9842 provided with chicken mesh wire netting 25 gauge, 20mm mesh and covered with 0.01mm aluminium foil, complete all as specified and directed.

M&L for Dewatering and taking out sludge from tank of size and capacity (10000 to 20000Gln), removing the same to a distance not exceeding 50m with & including, cleaning the sump by wire brushing including ,including brooming down complete including white washing internally, complete all as specified and directed.

Supplying, Hoisting and Fixing of Rotational moulded polyethylene water storage tank of capacity of 1000 litres (cuboidal or cylindrical as approved by Engineer-In-Charge) vertical with closed top), for hoisting into position either inside or outside of building, connecting up pipes, securing access covers etc., with monkey-proofing mechanism, hoisted and fixed in position Complete all as specified in SSR Part I.

Material and labour for taking out the submersible pump set and motor assembly of capacity 2 HP to 10 HP from the borewell, by taking out the column pipes with chain pulley block and tripod stand, complete using skilled and experienced labour and transporting the same to workshop for repair and replacement of worn impellers -01 set , replacement of worn out bushings and bearings and transport back repaired pump set back to site after repair and Lowering the same in the bore well after testing complete all as specified and directed.

Material and labour for rewinding of submersible motor upto 10 HP by taking out the burnt out winding from the starter with PVC insulated copper winding wire of same gauge and size as per existing, replacement of thrust bearing and bushes and testing complete all as specified and as directed.

Material and labour for repair of centrifugal motor pump set 20/ 30 HP (Rewinding job will be measured separately), including removing the motor pump from the foundation, disconnecting from the motor and transporting to the work shop for repair including replacement of worn out impellers-01 set with bronze impellers, replacing bearing No 6307-02 Nos, replacement of worn out bearing housing, replacement of gland bush , unserviceable nut bolts and washers and bringing back the pump to the pump house and coupling the pump with motor and fixing on foundation and testing, complete all as directed.

Material and labour for rewinding of 20/30HP centrifugal motor by uncoupling the motor from the pump, removing the motor from the foundation and transportation of the motor to the workshop, opening the motor , taking out burnt out winding, preparing the slot for winding and rewinding of motor with super enamelled copper winding wire of appropriate size and gauge as existing to make the same cap of motor, varnishing and heat drying including scrapping of old paint & repainting with one coat of grey tinted synthetic enamel paint after motor is reassembled and testing complete all as specified and as directed.

patriotic builders

GH MOHD SHAH AND CO

M/S S. D. BUILDERS

Bidder Name

M/S S. D. BUILDERS

patriotic builders

GH MOHD SHAH AND CO

Kesar Impex