MP1/WASTE MANAGEMENT/YARD/CMSRU

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil ,backfilling the same soil or disposal of surplus excavated soil as directed.Rate is inclusive of demolishing bituminous surface/ concrete/ rubble/ solingstone etc if any.complete.

Providing and laying plain cement concrete 1:4:8 using 40mm down graded IS nominal size hard broken metal including cost and conveyance of all materials,labour for mixing, laying, consolidating curing as per IS.456 etc.complete but excluding cost of cement and cost of formwork.

Providing Form work,Centering and shuttering including strutting, propping using shuttering sheet , supporting beams, supporting jacks,wooden planks and other incidentals etc. including removal of formwork after completion of work and clearing all materials and cost and conveyance of all materials labour etc

Reinforcement for RCC work including cost and conveyance of all materials, labour for, uncoiling ,straightening, cutting,bending, laying & tying with 22G binding wire etc.complete but excluding cost of steel (mild steel or tor steel) but including cost of binding wire.

Brick work with common burnt clay machine moulded modular bricks of class designation 12.5 in exposed brick work including making horizontal and vertical grooves 10 mm wide 12 mm deep complete in cement mortar 1:6 (1 cement : 6 coarse sand).Rate for Foundation and basement

Plastering with CM floated hard and trowelled smooth including cost and conveyance of all materials, labour, curing etc.complete as directed by the Engineer-in- charge but excluding cost of cement.

Providing and laying reinforced cement concrete 1:2:4 using 20mm down graded broken granite metal in ground floor upto 5m height including cost and conveyance of all materials, labour for mixing, laying, consolidating, curing,cost of dewatering etc.complete but excluding cost of cement,cost of formwork and cost of reinforcement.

Providing and fixing of pre-coated galvanized iron profile sheets of any colour (Size, shape and pitch of corrugation as approved by Engineer-in-Charge) 0.50 mm(+ 0.05%) total coated thickness with zinc coating 120 grams per sqm as per IS: 277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns.The sheet shall be fixed using self drilling/self tappingscrews size (5.5X55mm) with EPDM seal, complete upto anypitch in horizontal/vertical orcurved surfaces. Make(JSW/JINDAL/TATA)

Painting with primer of approved quality and shade after rubbing and cleaning the surface including cost and conveyance of all materials,labour, scaffolding other incidentals, curing (wherever required) etc.complete.One coat zinc chromite primer

Painting with exterior quality Acrylic emulsion paint of premium quality and colour after rubbing and cleaning the surface using wire brush,sand paper etc. including cost and conveyance of all materials labour, scaffolding other incidentals etc. complete.One or more coats on old surface(@.90ltr/10sqm)

Fabrication & erection of Structural steel work, using Tees, angles, channels, plates,Tubes & Pipes etc. at all heights, fixed with or without connecting plate, including cutting, bending/straightening, welding/ bolting, fabrication, erecting in position, aligning the erected structure, cost of all accessories, hire for tools and plants and applying a priming coat with zinc chromate primer after mechanical buffing, etc complete. all as directed by the Engineer-in-charge.(all miscellaneous items made of steel shall be measured in the same item) complete.Using Steel procured by the contractor

Suppying and stacking at site OPC/PPC/PSC conforming to relevant IS.

Supplying and stacking at site TOR steel reinforcement bars of different diameters conforming to relevant IS1786 .

Supplying and pasting sun control film to the shutter of glazed doors/windows/partitions after cutting to the required size including cost and conveyance of all materials, labour other sundries etc. complete all as directed by the Engineer- in- charge. Check/ Strips frosted

Supplying and laying non-slippery/anti-skid ceramic flooring tiles of approved brand ,quality and colour set in CM 1:4 20mm thick and Jointing with grey cement slurry @ 3.3 kg/sqm for the proper binding of the tiles to line and level, pointing the joints with coloured cement to match with the tiles including cost and conveyance of all materials, labour other incidentals (size 300mm x 300mm), excluding cost of cement.(Basic rate of tile Rs.410/m2 Excl.GST )etc. complete

Supplying and laying ceramic glazed tiles of approved brand ,quality and colour for dadoing by pasting with Cement and pointing the joints with coloured cement to match with the tiles in line and level including cleaning the existing surface properly, cost and conveyance of all materials, labour other incidentals etc. quantity of cement shall be measured in relevant item. complete (Basic rate of tile Coloured Tiles Rs. 210/m2 Excl.GST)

Supplying and laying approved brand ,quality Vitrified flooring Tiles of size 800mm X 800mm by pasting with chemical adhesive Cerabond /equivalent and pointing the joints with coloured cement to match with the tiles in line and level including cleaning the existing surface properly, including cost and conveyance of all materials, labour other incidentals etc. complete, 800x800mm (Basic rate of tile per Sq mtr Rs.`850.0 Excl.GST)

Plastering with CM floated hard and trowelled smooth including cost and conveyance of all materials, labour, curing etc.complete as directed by the Engineer-in- charge but excluding cost of cement. 1:4, 12mm thk.(1cement : 4Fine sand)

Suppying and stacking at site OPC/PPC/PSC conforming to relevant IS.

Supplying and stacking at site TOR steel reinforcement bars of different diameters conforming to relevant IS1786 .

Supplying and fixing glazed earthenware European type water closet of white colours with 8 mm dia C.P. Brass/ S.S. Jet with flexible tube upto 1 metre long with S.S. tringular plate for Eureopean type W.C.(Hindware/Kingston/ Prima /Parko/ Marc),plastic seat with lid with controlled flush, low level cistern made of vitreous china of 10 litre (full flush) capacity-white etc complete.

Providing and fixing in position approved quality white glazed earthenware flat back lipped front urinal 265 x 315 x 440mm or nearest size having a 15mm PVC connection, 32mm or nearest dia PVC waste connection and 1 no CP spreader connected to waterline and 15mm brass push cock, cutting and making good the walls and floors, including cost and conveyance of all materials, screws, plugs, labour, other incidentals, etc. complete. All PVC items are to be heavy duty type.

Supplying and fixing 690 x 165 x 325mm size or nearest size porcelain urinal division plate of approved quality and colour as directed by the Engineer-in-charge.

Providing and fixing in position powder coated aluminium double leaf door with outer frames of size 63.5mm x 38.1mm x 2mm or nearest available size all round, vertical styles & top horizontal member of size 50mm x 45mm x 2mm, bottom horizontal member of size 100mm x 45mm x 2mm of superior quality powder coated aluminium sections panelled with 5mm thick plain glass fixed with EPDM beading between panel and aluminium frame on all faces and glass fixed at a height of 1m from the top. Bottom half with 8mm thick particle board of height 1.2m from bottom frame including cost and labour charges for all materials and fixing etc., complete. The door is to be provided with 1no. door lock,1 no tower bolt, 4 nos anodized aluminium handles 150mm or nearest size one on each face of door shutter, 2 nos of door closer of approved make.

Providing and fixing in position powder coated aluminium single leaf door with outer frames vertical styles & top horizontal member of size 50mm x 45mm x 2mm, bottom horizontal member of size 100mm x 45mm x 2mm of superior quality powder coated aluminium sections panelled with 5mm thick plain glass fixed with EPDM beading between panel and aluminium frame on all faces and glass fixed at a height of 1m from the top. Bottom half with 8mm thick particle board of height 1.2m from bottom frame including cost and labour charges for all materials and fixing etc., complete. The door is to be provided with 1no. door lock, 2 nos anodized aluminium handles 150mm or nearest size one on each face of door shutter, 1no of door closer of approved make.

GRID CEILING Providing & Installing to true line and level commercial type Suspended Modular Ceiling suspended using suitable support system at every 1200mm intervals. General Requisites; Grids width: 24 mm finished in approved shade (white). The main runners & cross Tees to have "stab" installation system made of corrosion protected galvanized steel or approved equivalent. Tile Specification Tile type: Calcium Silicate ceiling Tile Size 600 x 600 x 15 mm thk. Edge detail: Tegular Ceiling Suspension System Grid Member Sizes. Main Runners: 24 x 32 x 0.30 mm or nearest available size Cross Tees: 24 x 24 x 0.30 mm or nearest available size Perimeter Section: 24 x 27 x 0.40 mm or nearest available size. False Ceiling will be measured on horizontal Plane only. Horizontal Plane measurements are to be inclusive of vertical drops, edge mouldings, fascias etc. All extra tiles occupied by lights and diffusers to be returned to department Rate quoted to include all cut outs required for light fixtures.

Supplying and fixing the following water supply fittings approved by the Engineer-in-charge, including cost and conveyance of all materials, all labour for fitting, all other incidental charges etc. complete for all levels.

15/20 mm dia angle cock

SS gratings - 125/150mm size

Brass ball valves 25 mm

Supplying, fixing, laying and jointing the following dia PVC pipes with pasted type joints of approved quality using solvent cement including all cost and conveyance of all materials, sundries etc. complete. The rate shall be inclusive of supplying and fixing necessary specials etc. as per the direction of the Engineer-in-charge.

25mm dia

110mm pasted PVC pipe(4kgf)

50mm dia (10kg/cm2)

Supplying and fixing ISI marked / best quality approved brand 110 mm PVC specials at all heights including cost and conveyance, all labour and all other incidentals etc. complete all as directed by the Engineer-in-charge.

Tees, door tees, bends etc.

Adapters, reducers, offsets, vent cowl etc.

Providing and fixing 600 x 450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick hard card ground fixed to wooden cleats with CP brass screws and washers complete.

Supplying and fixing PVC multi floor traps with 110mm dia including cost and conveyance of all materials, labour, other incidentals etc. complete.

Providing and fixing 15mm nominal bore CP brass long body bib cock with wall flange of approved quality and make.

Supplying and fixing PVC line traps including cost and conveyance of all materials, labour, other incidentals etc. complete.

Providing and fixing in position louver type ventilator using powder coated Aluminium frames of approved quality and shade using 48x38x1.5mm size or nearest available sections, louvers made with 4mm thick glass, screws, nails etc. including cost and conveyance of all materials, all labour etc. complete as directed by the Engineer in charge.

Providing and fixing in position fully glazed aluminium super sliding window/ventilator with lock system, powder coated aluminium heavy section with sliding shutters using following sizes or nearest available size 63.5 x 31.75 x 2mm for frames, 38.10 x19.5 x 2mm for shutter interlock, vertical and horizontal and plain glass 4mm thick including all fixtures like hinges, locking arrangements, handles, EPDM beadings etc including cost and conveyance of all materials, labour, other incidentals etc. complete.

Provinding and fixing electrification work inside material&HR office , toilet and bathrooms including all lights,switch boards,exhaust fans,AC etc list and work is attached.

M/s Roy Infra and Developers

vagmine marine care

arcoma