WBPWD/SSE/SWEC/NIQ08/2025-26

Amount

Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Polycab/RR Cable/Havells)) partly in 20mm size PVC rigid conduit 'FR' (Precision make) [for ceiling portion only] and in 19mm bore, 3mm thick polythene pipe [for horizontal & vertical run embedded in wall], with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board complete with 2 no. suitable size “Ph & N” copper bar with top cover plate making earthing attachment fixed on wall incl. mending good damages to original finish. [only PVC Rigid Conduit on ceiling and remaining portion concealed] (Average run 8 mtr)

Supplying and fixing double-door 2+12 way SPN MCB DistributionBoard with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages tooriginal finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment (Make - Legrand/Siemens/Schneider) [PWD/GS Page: D-9 Item: 13]

Supplying and fixing 240 V 6-32A SPMCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection. (Make - Legrand/Siemens/Schneider) [PWD/GS Page: D-6, Item: 7 ]

Supplying and fixing 240 V 32A DPMCB Isolator on din rail of existing DBs and necessary connection. (Make - Legrand/Siemens/Schneider) [PWD/GS Page: D-5, Item: 6 ]

Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Make:- Legrand-Myrius/Crabtree-Murano/North-West- Stylus Plus /Schneider -Zencello), without plug top and switch with 2 Module GI Modular type switch board with top cover plate flushed in wall and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V,25 A, 3 pin Modular type plug top with indicator (Make:- Legrand-Myrius/Crabtree-Murano/North-West- Stylus Plus /Schneider -Zencello) & necy. Connections.

Supply & Fixing 240 V, 25 A, Modular type Starter (Make:- Legrand-Myrius/Crabtree-Murano/North-West- Stylus Plus /Schneider -Zencello) with 25A Modular type DPMCB (C-Curve) on 4 Module GI Modular type switch board with 4 module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. [PWD/GS Page: E-19 Item: 17]

Supply and Fixing of Timer DB (concealed in wall or Surfaced as per the site condition) 1) 230V, Upto 16 A capacity 24 Hrs Analog Electromechanical Time Switch (Make-Lauritz Knudsen (L&T) Cat No:- AUTS03ANA00/Siemens/Schneider) -- 01 Nos 2) 2 Pole Power Contrcator (L&T-MNX 25-2P Cat No-CS90240/Siemens/Schneider ),---- 02 Nos. 3) 20A SP MCB. [Make-Siemens/Schneider/Lauritz Knudsen (L&T)] --- 02 Nos 4) 32A DP Isolator. (Make-Siemens/Schneider/Lauritz Knudsen (L&T)---- 01 Nos 5) Toggle Switch. (Make-Siemens/Schneider/Lauritz Knudsen (L&T) or equivalent make)--01 Nos. 5) (2+16 Way) SPNDB (Make-Siemens/Schneider/Lauritz Knudsen (L&T) ---01 Nos 6) Bakelite base with FP bolt type stud / Terminal block incl S & F Neutral Bar etc with this box for termination of power.----- 01 Nos 7) The complete arrangement must be wiring by 1/2.5/4/6 Sq mm PVC insulated Cu wire(Make:- Gloster/Polycab/Havells) with suitable length incl socketing /lugs etc as per requirement & direction of EIC (Make-Siemens/Schneider/Lauritz Knudsen (L&T)/Legrand)

Supply & Fixing 240 V, 3 nos. 6A, & 1 no. 20A plug socket with separate 3 nos. 6 A & 1 no. 20A Piano key type switch, indicator & 20A switch type SP MCB (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 240x200x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required [PWD/GS Page: E-7, Item: 26 ]

Supply & Fixing 240 V, 2 nos 6A, plug socket with separate 2 nos 6 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite / perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required [PWD/GS Page: E-6, Item: 21 ]

Supply & Delivery of Heavy duty (9") / 230 mm dia, 240V, 1370 RPM, 40Watt, Exhaust fan [Make: EPC Heavy Duty/ USHA Heavy Duty/ Orient Electric Heavy Duty]

Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter: 9"/230 mm

Supply & Fixing louver shutter on wall with necy. bolts & nuts (6 mm dia x 62 mm long) For AL. 9"/230 mm

Supply & delivery of Single LED Tube light fitting [Make - Signify (Philips) cat no. TMC 502 P 1 x T-LED / Crompton cat no. IGP161 LT8-16 1 X T8 /Wipro Cat No. WIO921208P or equivalent of MAGIK ] complete with 18/20 W LED tube lamp [Make - Philips Master LED tube model no. Mas LED Tube 1200mm 18W 865 T8 I – 2100lm / Crompton cat no. LTT8-20 / Wipro Cat No. LL-13-291-650 ]

Supply & delivery of Twin LED Tube light fitting [Make - Signify (Philips) cat no. TMC 502 P 2 x T-LED / Crompton cat no. IGP162 LT8-16 2 X T8] / Wipro Cat No. WIO922208P or equivalent of MAGIK ] complete with 2 x 18/20 W LED tube lamps [Make - Philips Master LED tube model no. Mas LEDTube 1200mm 18W 865 T8 I – 2100lm / Crompton cat no. LTT8-20 ] / Wipro Cat No. LL-13-291-650 ].

Fixing only single/twin fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length.

Supply & Fixing angular batten holder (Anchor) on 75mm dia PVC round block / round bakelite on wall/ceiling with 9W lamp. (Make:- Signify(Philips) /Wipro/Crompton)

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire ((Polycab/RR Cable/Havells/Gloster) in 20mm size (whichever is applicable) PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required. [PWD/GS Page: E-14 Item: 1.a]

2 x 84/0.3 (6 sqmm) + 1 x 56/0.3 (4 sqmm) ECC ( HTPN To SPNDB )

2 x 56/0.3 (4 sqmm) + 1 x 36/0.3 (2.5 sqmm) ECC (AC Points)

2x 2.5sqmm + 1x 1.5 sqmm as ECC (Computer and power point) (Computer Board)

2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC (Separate Plug)

Finishing of the PVC insulated wire ends by socketting with pin/ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. [PWD/GS Page: F-5 Item: 9 ]

Supplying & Fixing 240 V AC/DC superior type Ding-Dong Call Bell (Anchor) with Buzzer on HW board incl. S&F HW board.

Supply & delivery of AC 240V 50 Hz 48" sweep (1200 mm) ceiling fan complete with down rod, Canopy, fork incl S & F of P - 2 type capacitor as per IS specification & proper Manufacturer certificate of the capacitor and Safety Wire (supplied at the time of delivered the fans ) etc. without regulator, (Make- Usha 1200MM STRIKER PWD ISI 1 STAR (Safety Wire & S3 Capacitor) Br /Orient Electric- New Breeze (5yrs warranty),1200 mm sweep; 44W; 320 rpm; 225 cmm; 3 star ac ceiling fan or equivalent model of Crompton Greaves and as per direction of EIC as per direction of EIC.

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire.

Dismantling charges of window AC Machine and proper finishing the gap

Installation, Testing & commissioning of 1.5/1.9/2.0/2.1 Tr. Split type AC both indoor/ outdoor unit incl. S& F of 40 X 40 X 5 mm MS angle iron frame for installation of ODU and sealing of the holes in wall created during the copper pipe connection between IDU & ODU by proper sand-- cement plastering and painting (both inside and outside) to match up with the original finish mending good the damages to complete the instn as per direction of EIC.

Supply & laying Drain Water piping work out of PVC / HDPE hard pipes of 19/ 25 mm dia. incl. fitting, accessories, bends, elbows, tees, flanges, tapings, wall sleeves, hangers, supports, anchors. (Make:- Supreme/Astral/Finolex/Skipper)

Supply andlLaying of 5/8” or 1/2"& 1/4" dia (Soft drawn) Cu. Pipes (As per standard) with tube thickness 0.6mm incl. 9mm thick nitrile rubber insulation, , insulation tape, fastner, etc as necessary as per direction of EIC. Copper Pipe Make: Hitachi Ryoku/Mandev/Rajco & Nitrile Rubber Insulation Make: Armacel/Accoflex/K-flex

S & Laying of 3/4 Core 2.5 sqmm PVC insulated & unarmoured copper wire (Make:- Havells/Polycab/RR Kable/Finolex) through 13/19 mm dia 3 mm thick (Flexible or rigid) pipe for 1.5/2 Tr. Split AC machine with max saddling with max 1 mtr distance as per the direction of EIC.

Supply & Delivery of Hi-Wall Split Air Conditioner having the following specification:- 1) Cooling capacity Nominal :- 1.9/2.0/2.1 TR ( Ton of Refrigeration) 2) Minimum ISEER rating- 3.5, BEE leveling 3 star or more (2019-20) IS compliance - IS 1391 3) Refrigerant- R410A/R32 4) Compressor- Rotary/Scroll 5) Evaporator & Condensor Coil : Copper 6) Operating Outdoor Temparature = 50°C and above 7) Power Supply- 230 V, 50 HZ (Tolerance as per applicable standard) 8) Cordless Remote Arrangement with all modernized provision of temperature setting, Fan speed option (Low/Medium/High) Auto Swing. (Make- O-General Cat No. ASGA24BMWA-B (R32) /Mitsubishi Electric MS/MU- AGZ24VF or Equivalent model of Mitsubishi Heavy Industry)

CHANDIMATA TRADERS (BID ID -6771947)

TAPAN ELECTRICS (BID ID -6769441)