COMPREHENSIVE B/R REPAIRS WORK IN OTM/MD ACCN INCLUDING TILING, PLASTERING, JOINERY, ROOF TREATMENT, SANITARY FITTING, PERIODIOCAL SERVICES AND WELCOME MAINT IN OFFRS MD ACCN AND OTHER CONNECTED WORKS INCL EM WIRING AT AJMER MIL STN

Amount

Taking down cement or cement lime plaster on stone or bricks wall etc including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified & directed.

M & L for rendering in cement mortar (1:6), 15mm thick on stone masonry surfaces finished fair and even complete all as specified & directed.

M & L for rendering in cement mortar (1:4) 10mm thick as in ceiling surfaces finished fair and even complete all as specified & directed.

M & L for rendering 15mm thick in CM 1:4 on stone masonry, external surfaces finished fair & even complete all as specified & directed.

Supply only water proofing complete all as specified & directed.

M & L for preparation of newly plastered surfaces of two coat of white wash on ceiling complete all as specified & directed.

M & L for preparation of new plastered surfaces and applying two coats of oil bound distemper all as over a coat of chalk white complete all as specified & directed.

M & L for preparation new decorated surfaces of walls and applying two coat of cement base paint complete all as specified & directed.

M & L preparation old decorated plastered or unplastered surfaces and providing one coat of white wash on wall including cornices complete all as specified & directed.

M & L preparation old decorated surfaces of walls and providing one coat of cement base paint complete all as specified and directed.

M & L for preperation of old plstered surfaces of walls and applying one coat of oil bound distemper white or tinted with 1 mm thick wall putty all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified & directed.

M & L for vitrified ceramic dark tiles 10 mm thick (square/rectangular) polised area of each tile exc 0.36 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with colour of tiles over and incliding screed bed 15mm in CM (1:6) complete all as specified & directed.

M & L for vitrified ceramic dark tiles in vertical surface such as skirting/dados etc 10 mm thick (square/rectangular) polised area of each tile exc 0.36 sqm etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with colour of tiles over and incliding 10mm thick CM (1:4) as in backing coat complete all as specified and directed.

Material & Labour for Non - skid coloured ceramic tiles 400x400x 7 to 8 mm thick (square), in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

Material & Labour for Non - skid light coloured ceramic tiles of size 600x600x7-8mm thick in floors etc. set and jointed in neat cement slurry and inted in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M & L for Non-Skid light coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.18sqm but not exceeding 0.36 sqm in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with colour of tiles over and incliding 10mm thick CM (1:4) as in backing coat complete all as specified and directed.

Material & Labour for Coloured glazed ceramic tiles in vertical surface 300x 450x 7-8 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick cement plaster in ement mortar 1:4 as backing coat on fair faces on stone surface complete all as specified & directed.

Material and labour for Machine cut kota stone slab flooring of size 550*550*18-22mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete, over and including cement screed bed 15 mm thick in cement mortar (1:6) base including rubbing and mirror polishing, and half nose moulding (bull nosing) etc complete all as specified & directed.

All as per item above but pre-polished kota stone as in vertical surfaces such as skirting and risers over and including 10mm thick plaster in cement mortar (1:4) on brick work or concrete surfaces complete all as specified & directed.

Material & Labour for Granite work (Jet/Telephonic Black) 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, counter basins, urinal partitions etc. and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of following types and including 15mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in coloured cement to match the surfaces and half nose moulding (bull nosing) etc complete all as specified & directed.

Material & Labour for 50 mm thick Cement concrete 1:3:6, type C-1 (using 20mm graded stone aggregate) as in plinth protection with fair finished complete. Note : Joints 12 mm wide to the full depth of PCC shall be provided at every 3 meters and at every change of direction and shall be filled with mixture of bitumen and sand 1:3 by weight. Cost of this provision shall be deemed to be included in the quoted rate for concrete in plinth protection.

M & L PCC (1:4:8) Type D-2 using 40 mm graded stone aggregate in foundation, filling and mass concrete and sub base surface finished even & fair complete all as specified & directed.

M & L for Vitrified out door tiles 40 cm x 40 cm x 10-12 mm thick digital design set, jointed and pointed in neat cement slurry as in floors with grey cement over & including over screed bed or bedding layer of mortar 20 mm thick Cement Mortar 1:6 complete all as specified & directed.

Material & labour for PCC 1:2:4 type B-1 ( using 20mm graded mechanically crushed stone aggregate) as in bed blocks, copings, apex stones,side of interlocking tiles etc complete all as specified & directed.

Dismantling Asbestos cement (corrugated of emicorrugated etc), any gauge, thickness, roof coverings complete all as specified as directed.

Supply and fixing pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having 550 Mpa tensile strength as in roof covering/cladding and fixed with self tapping screws complete all as specified & directed.

Supply and fixing pre-painted galvatume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having 550 Mpa tensile strength as in roof covering/cladding and fixed with self tapping screws complete all as specified & directed.

Dismantling unframed timber fillets, rails, posts, rafters, purlins etc under 40 sqcm in section complete all as specified as directed.

Supply and fixing steel work in tublar truss including special shaped washer etc. complete using ERW or induction butt welded tubes confirming to IS 1161-1979 grade st 240 etc confirming to fe-410-W (Gde-E-250) quality-A all as specified as directed.

Taking down pelmet/ curtain rod any size with rod and bracket fixed to wall complete all as apecified & directed.

S & F fancy type SS curtain rods 22 mm dia powder coated complete all as apecified & directed.

S & F decorative type knobs with bracket of SS powder coated fixing at end of pelmet rod complete all as apecified & directed.

Taking down 100 mm bore CI soil waste and vent pipe complete including all fittings complete all as apecified & directed.

S & F 100 mm bore CI (sand cast) soil, waste and vent pipe, in any length, without ears, with cement joint, fixed to walls or laid in floors etc complete all as apecified & directed.

S & F in repairs cast iron 100mm bore branch pieces (Tee) single (equal or enequal) ordinary or inverted (spigot or socket type) or with paralled branches fixed with cement joint complete all as apecified & directed.

S & F in repairs 100mm bore CI bend (any radius) complete all as apecified & directed.

S & F CI Nahani trap 75 mm outlet,with grating including jointing to waste pipe fixed in cement concrete type B1(1:2:4) as in repairs complete all as apecified & directed.

Taking down eaves gutters and rain water pipe complete including all fitings complete all as apecified & directed.

S & F in repairs PVC (SWR) 110mm dia single socketed in any length with rubber ring joints fixed to walls complete all as apecified & directed.

S & F 110mm PVC (SWR) bends complete all as apecified & directed.

S & F PVC (SWR) 110 mm dia single Tee complete all as apecified & directed.

Taking down 75mm bore CI soil waste and vent pipe complete including all fititings complete all as specified & directed.

S & F Cast iron vent pipes 75mm dia in any length with or without ears cement joints fixed to walls complete all as specified & directed.

S & F in repairs 75mm bore Cast iron bends (any radious) complete all as specified & directed.

S & F in repairs 75mm bore CI Tee with acces door complete all as specified & directed.

Taking down steel tubing and connection including cleaning for refixing or removing to store complete all as specified & directed.

All as per item no 47.00 above but Bore 15 mm

All as per item no 47.00 above but Bore 20 mm

All as per item no 47.00 above but Bore 25 mm

S & F water tubing, medium weight ISI marked galvanized with all fittings & fixed to walls, ceiling or laid in floors complete all as specified & directed.

All as per item no 48.00 above but Bore 15 mm

All as per item no 48.00 above but Bore 20 mm

All as per item no 48.00 above but Bore 25 mm

Re-fixing old steel tubing and connections in new or old position in walls, floors,ceiling etc complete all as specified & directed.

All as per item no 49.00 above but Bore 15 mm

All as per item no 49.00 above but Bore 20 mm

All as per item no 49.00 above but Bore 25 mm

Dismantling of exisiting unserviceable RCC/PVC water tank of Capacity 250- 500 litre each & removing from site complete all as specified & directed.

All as per above item but exc 500 Ltrs but not exc 1000 Ltrs capacity complete all as specified & directed.

S & F rotational moulded synthetic (HDPE) water storage tank 500 Ltr capacity hoisted & fixed in positioin all as specified in SSR Part-I complete all as spd & directed.

S & F rotational moulded synthetic (HDPE) water storage tank 1000 Ltr capacity hoisted & fixed in positioin all as specified in SSR Part-I complete all as spd & directed.

Material and labour for 50 mm thick sand stone slab , set & jointed on joists in cement mortar (1:4) including 25 mm thick PCC (1:2:4) type B-0 using 12.5 mm graded crushed stone aggregate (for providing bottom cover to PVC tank) complete all as specified and directed.

S & F in repairs plastic water closet seat cover, white, closed pattern with flat bottom and cover & miled steel chromium plated or aluminised hinging device complete all as specified and directed.

S & F in repairs vitreous china wash down water closet pan (pedestal pattern), white, including plastic white cover closed pattern with flat bottom and mild steel chromium plated hinge device including connections to drain (or outgoing pipe ) and to flushing pipe anti syphonage pipe etc complete all as specified and directed

S & F in repairs Vitreous China, Squatting pan Orissa pattern size 580X440mm, white with integral foot rests (excluding flushing cistern and flush pipe ) with Vitreous China ‘P’ or ‘S’ trap, front or back inlet including connection to trap and to flushing pipe, anti syphonage pipe and making good the floor to match the existing complete all as specified & directed.

S & F in repairs PVC valveless syphonic action type low level flushing cistern, 10 Ltrs capacity . White, with inlet ball valve, float and handle fixed on walls by driling holes and using PVC rawl plug of suitable size complete all as specified & directed.

S & F in repair flush pipe 32mm dia for low level flushing cistern complete all as specified & directed.

S & F in repairs wash hand basin vitreous china white / ivory colour flat size 550 x 400mm fixed including waste coupling, waste pipe & connection pipe complete all as specified & directed.

S & F in repairs stop valve 15 mm bore cast copper alloy fancy type ISI marked chromium plated with long shank & cup (concealed type) screwed down high pressure screewed both ends for iron pipe complete all as spd & directed.

S & F in repairs sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm without drainage board, with plugs, washers and waste including fixing cantilever brackets complete all as specified & directed.

S & F in repairs sink with drainage board made of stainless steel 1.00 mm thick, kitchen, with plugs, washers and waste including fixing cantilever brackets and connecting union overall size not less than 1145mm x 510mm, bowl size 560 x 410 x 200mm complete all as specified & directed.

S & F in repairs 15mm bore PVC connection 45cm long with 2 Nos PTMT nut at both ends complete all as specified & directed.

S & F in repairs 15 mm bib taps standard of PTMT any colour high pressure screwed for iron pipe ( minimum weight 90 grams) complete all as specified & directed.

S & F in repairs bib taps 15mm bore fancy type, cast copper alloy, chromium plated with crtuch or butter fly handle, screwed for iron pipe or for brass ferrule complete all as specified & directed.

S & F in repairs pillar taps fancy type cast copper allloy capston headed, chromium plated, screwed down, high pressure with long screwedshank and fly nut, screwed for 15mm bore iron pipe complete all as specified & directed.

S & F PVC floor trap with grating 75mm dia fixed with cement joint complete all as specified and directed.

S & F in repairs grating square 125mm size of PTMT with centre hole movable or side hole for fix to waste pipe complete al as spd & directed. (Min Wt- 100 gms) complete all as specified & directed.

S & F in repair tubular towel rail aluminium anodised 20mm dia 'D' type 60cm long between flanges complete all as specified & directed.

S & F in repair brass chromium plated shower rose of 75mm size with swivel joints, incl . Fixing to steel pipe or union of 15mm bore complete all as specified & directed.

S & F in repairs angle valve 15mm bore cast copper alloy fancy type ISI marked chromium plated with long shank & cup screwed down high pressure screewed both ends for iron pipe complete all as spd & directed.

Taking down shutters of any description exc 1.00 Sqm but n. exc 2.00 sqm each leaf and removing from site complete all as specified & directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.50 sqm and n.exc 4.00 Sqm each and removing from site complete and making good disturbed surfaces of wall in CM (1:3) complete all as specified & directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n exc 1.50 sqm each and removing from site complete and making good disturbed surfaces of wall in CM (1:3) complete all as specified & directed.

Taking down shutters of any description n exc 1.00 Sqm each leaf and removing from siteComplete all as specified and directed

S & F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with M S square tube, supplying and fixing in opening as per specification and drawing completeall as specified and directed

Supply and fixing PVC factory made shutter solid, PVC moulded prelam coloured on both side door shutter with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, with particle board core 28 to 30 mm thick (stiles), with 2, 4 or 6 raised panel design in framing at site as per specifications & drawings complete all as specified & directed.

M & L for MS framed work such as 12mm square guard bars conforming to Fe 290-0 or Fe 330-0 welded to ventilator/window /gate complete all as specified & directed.

Supply and fixing, made 100% Solid WPC (Wood Polymer Composite) Door Frames of cross section 65 mm x 125 mm (moulded) having single rebated made from Wood Polymer Composite (Single Extruded Process) material comprising of virgin PVC polymer of K-Value 57-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ruce husk/wheat husk)and non toxic additives fabricated with meter joints after applying PVC solvent cement & screwed with full body treated star headed screws having minimum frame density of 780 Kg/cbm & manufactured by "Rajshri/Echon or Eq" an ISO 9001-2015 certified company, having good screw holding capacity (Screw withdrawal strength of (Min, 990N) Minimum compressive strength of 58 N/mm2, modulus of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite/borer prof, water/moisture proof & fire retardant & fixed in position with and including SS Dsh Fasteners/Hold Fast of required dia and length, all as per specifications drawings as directed,. Material test certificate and authentication should be compoulsory provided by the manufacturing company.

Supply and fixing, made 100% Solid WPC (Wood Polymer Composite) Door Frames of cross section 45 mm x 70 mm (moulded) having single rebated made from Wood Polymer Composite (Single Extruded Process) material comprising of virgin PVC polymer of K-Value 57-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ruce husk/wheat husk)and non toxic additives fabricated with meter joints after applying PVC solvent cement & screwed with full body treated star headed screws having minimum frame density of 780 Kg/cbm & manufactured by "Rajshri/Echon or Eq" an ISO 9001-2015 certified company, having good screw holding capacity (Screw withdrawal strength of (Min, 990N) Minimum compressive strength of 58 N/mm2, modulus of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite/borer prof, water/moisture proof & fire retardant & fixed in position with and including SS Dsh Fasteners/Hold Fast of required dia and length, all as per specifications drawings complete all as specified & directed. Note:-Material test certificate and authentication should be compoulsory provided by the manufacturing company.

S & F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N / m2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fie retardant WPC to be laminated with PVC foil of minimum 14 micron thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws complete all as specified & directed. Note : Stainless steel butt hinges and necessary SS screws shall be paid separately. .

M & L for rolled mild steel work angle iron as in door frame (Chowkhats) of frame confirming to Fe-290 or Fe-330 including preparing back of chowkhat and applying two coats tar and sanding newly tarred surfaces with clean sharp sand complete all as specified & directed.

S & F second class HW Hollock/Bonsum/Sal 35mm thick, factory made, plain framed, paneled shutter (Three panels) with panels of 9mm thick BWP grade ply wood bonded with high quality liquid phenol formal dehyde synthetic resin adhesive conforming to IS-710. The size of rails & style shall be as per IS-1003 (part-I) kiln seasoned as per IS-1141 & chemically pressure treated as per IS-401 complete all as per specified and directed.

S & F second class HW Hollock/Sal/Bansum (Terminalia Myriocapra), 35 mm thick, gauged and skeleton shutters, factory made open rebated (Three panels)and prepare to receive glass, gauge etc with out sash bar, edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass etc. Size of members of shutter shall be as specified in SSR 1991 Part-I, section 8 clause Member shall be kiln seasoned as per IS-1141 & chemically pressure treated as per IS-401 complete all as specified and directed.

S & F in repair 300mm aluminium alloy anodised sliding door bolts with hasp and staple (bolt type) & fixing clip of sheet cast or extruded section & fixing bolt & sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.

S & F Steel window/ ventilator glazed and gauged (combination) with side hung/ top hung shutters incl box type / projecting type hinges, and steel peg stay, handle & locking arrangement and frame made out of 1.25mm thick pressed steel frame complete incl necessary AC/Cooler arrangement in window & guard bars complete all as specified and directed. Note :Wire mesh and sheet glass shall be measured & paid separately under respective items.

S & F galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed on wooden/steel frames with tinned tacks or galvanized wire staple complete all as specified and directed.

S & F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, Overall length of cover plate 140mm complete all as specified and directed.

M & L for IInd class H/W Plain , Solid , Straight chowkats and frames sec area n exe 40 sqcm complete all as specified and directed.

Dismantling and M & L 18/19mm thick Block board grade 2 quality, interior grade, decorative type with decorative face, veneer on both faces complete, fixed with nails, including teak wood lipping 18/19 x 6mm thick fixed with nails in shelves, partition , almirah book cases, toilet boxes, racks, cup board shutter and similar works complete all as specified and directed.

S & F mild steel butt hinges, medium weight, cold rolled, ISI marked of size 100 mm complete all as specified and directed.

S & F aluminium handle 100mm, cast type, anodised complete all as specified and directed.

S & F hasp & staple 100mm size safety type, aluminium anodised with mild steel hinges pin including bolt of hinge plate & fixed with screw complete all as specified and directed.

S & F continuous (Piano) hinges mild steel bright finish or electro galvanised , width of flap when open 40mm complete all as specified and directed.

S & F in repairs butt hinges medium weight ISI marked 100mm size cold rolled mild steel completete all as specified and directed.

S & F in 300mm aluminium alloy anodised sliding door bolts with hasp and staple (bolt type) & fixing clip of sheet cast or extruded section & fixing bolt & sliding bolts of extruded section or cast aluminium alloy alll as spd & directed.

S & F 150mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed all as spd & directed.

S & F in repair steel handle of 125mm incl one nut & , bolt and washer of required size completete all as specified and directed.

S & F for in repair stainless steel wire cloth 0.36 mm nominal dia of wire & average width of aperture 1.40mm & fixed with wire staples complete all as spd & directed.

Hacking out old broken sheet glass (any thickness, size quality or description) from metal frame including punching or drilling out old glazing, pins, spring clips &supply & fixing new ones andS & F 3 mm thick sheet glass, ordinary / figured quality & glazing with oil putty not exc 0.50 Sqm each pane complete all as spd & directed.

S & F sheet glass pin headed type, 3 mm thick and fixed with oil putty, size of glass n. exc 0.50 sqm in each pane for steel or wooden windows/doors fixed with wooden beadand pin tacked complete all as specified and directed.

M & L for preparing the new wooden surface & applying two coats of synthetic enamel paint (1st grade) over one coat of pink primer over 10cm width or girth complete all as spd & directed.

M & L for preparation of new steel surfaces over 10cm width or grith & applying two coats of synthetic enamel paint of 1st quality over a coat of red oxide primer complete all as specified & directed.

Taking down aluminium door shutter of size exc 1.5 Sqm and n exc 4 Sqm each leaf, opening floor spring assembly over hauling, refixing floor spring (with new screws) and door shutter in position complete all as specified & directed.

M & L for powder coated Anodised Aluminium frames for doors, windows, ventilators with one or more rebates including jointing cleats for fixing etc complete all as specified and directed.

M & L powder coated aluminium door shutters, aluminium section weighing 0.55 Kg/m including necessary joining cleat, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc complete all as specified.

M & L powder coated aluminium window shutters, any type (sliding, side hung, fix etc) aluminium section weighing 0.55 Kg/m including necessary joining cleat, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc complete all as specified.

Dismantling of brick/tiles in floors and paving n.exc 15cm thickness (above or below ground level) complete all as specified and directed.

M & L for providing 75 mm thick, plain cement concrete type D-2, (1:4:8) using 40 mm graded aggregate as in sub base of floors complete all as specified & directed.

M & L and sand cushioning/filling under floors or laying interlocking tiles complete all as specified & directed.

M & L for machine pressed precast concrete interlocking paver blocks any shape and size conforming to IS 15658-2006 of 60mm thickness M-35 grade with gray cement and no pigment complete all as specified & directed.

Demolition of stone/brick masonry built in cement or cement lime mortar complete all as specified & directed.

M & L for brick work with flyash bricks straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed.

All as per above item but except brick complete all as specified and directed.

Taking down existing unservicable treatment of any description including cement plaster/cement concrete of any thickness from roof surface cleaning of roof surfaces and and preparing it for further treatment and removing rubbish from the site up to 50 mtrs complete all as specified and directed.

M & L for screeding 10mm thick in CM 1:4 on fair faces of RCC /stone patti roof surface finished fair & even without using extra cement even complete all as spescified and directed.

M & L for five layered APP modified polymeric water proofing membrane , 2mm thick having centre core not less than 100 micron high molecular high density polythylene film (HMHDPE) protected on both sides with high polymeric asphaltic mix and 20 micron HMHDPE film weight not less than 3.00 Kg/Sqm applied with bonding material using blown type bitumen conforming to IS-702 grade 85/25 @1.20 Kg/Sqm over bitumen primer conforming to IS-3384 @0.40 Kg/Sqm with final coat of bonding bitumen grade 85/25 @1.20 Kg/Sqm over APP membrane with all overlaps complete all as specified and directed.

M & L for PCC 40mm thick (minimum consolideted thickness) type B-0, using 12.5 mmgraded stone aggregate as in padding finished even and smooth wothout using extra cement with existing slope with V shaped grooves 6mm wide and10mm deep @0.40Sqm of each panel on top of padding and filled with mastic bitumen of 1:1 preparation complete all as specified and directed.

M & L for coved fillet in PCC 1:2:4 type B-0 using 12.5mm graded crushed stone aggregate at junction of roof & parapet wall and other vertical surfaces and surface painted with a hot paving bitumen grade 30/40 conforming to IS-73 @0.70 Kg/Sqm over a coat of bituminous primer conforming to IS-3384 @ 0.30 Ltr Sqm complete all as specified and directed

M & L for preparation of old wooden surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M & L for preparation of old painted steel surfaces of any description not otherwise described over 10cm width or girth and providing one coats of synthetic enamel paint complete all as specified and directed

Complete removal of existing surface of walls and applying two coats of oil bound distemper white or tinted over 1 mm thick birla white care putty complete all as specified and directed.

Racking out joints/ pointing to random rubble or polygonal rubble uncoursed or brought up to course built in cement or cement lime mortar complete all as specified and as directed.

M & L for rough cast plaster using crushed stone of size between 6 mm to 10 mm, coarse sand and cement mixed in the ratio of (1:1:1) over and including rendering coat of 15 mm thick on fair faces of brick work or concrete surfaces or stone masonry surfaces or other than fair faces of brick work or on one side of lathing (on vertical surfaces) in cement mortar 1:4 finished even and fair including two coats of cement base paint complete all as specified and as directed.

M & L for 40 mm PCC 1:2:4 , type B-0, using 12.5 mm graded crushed stone aggregate as in floor complete all as specified and directed.

S & F collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handle etc., as spd erected in position and securing runners with holdfast and brackets complete all as specified & directed.

S & F steel rolling shutter 1.25mm thick with out ball bearing as spd incld top cover anchoring rod, hasp and staple and one shop coat of primer erected in position as indicated complete gear operated type with wheel and hand chain complete all as specified & directed.

S & F safety lever locks mild steel with 4 lever for rolling shutter complete all as specified & directed.

S & F ball bearing for rolling shutter complete all as specified & directed.

Dismantling of ceiling board/lathing any thickness including frame work complete all as specified & directed.

S & F false ceiling with Everest Fibre Cement Designer tile Ivory painted (HPSC) of 4mm thickness (as per IS:14862) of size 595x595 mm and any one of the design (oceanic, lake & hill, cascade or electra) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 gms, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and 15x32 mm made from 0.30 mm thick sheet, spaced at 1200 mm c/c and cross "T" of size 15x32 mm made of 0.30 mm sheet, 1200mm long spaced between main "T" at 600 mm c/c to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size15x32 mm made of 0.30 mm thick sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 15x20 mm made of 0.30 mm thick sheet and laying ceiling tiles in the grid incl, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI soffit cleats fixed to existing RCC lintel with dash fasteners, GI adjustable rods of 3mm dia with galvanised Butterfly level clips, spaced at 1200 mm c/c along main T, bottom exposed width of 15mm of all T -sections shall be centra black pre-painted with polyester paint, and having a load bearing capacity of 12 kg/sqm,complete all as specified and as directed.

S & F for M S plate or angle, channel, square cut or notched with riveted, bolted or welded attachment complete all as specified & directed.

Dismaintling wrought iron or mild steel work of any description not otherwise provided for. complete all as specified and directed

Dismantling timber scantlings 40 Sqcm and over in section ,in any position in un-framed work, complete all as specified and directed

Demolition of cement concrete of any description and in any position complete all as specified and directed.

Providing precast cement concrete type C0(1:3:6) louvres and jallies, 25 mm thick (mea sured solid), including all mouldings but excluding frame set in cement mortor 1:4 complete all as specified & directed.

Disconnecting existingtanks of cap 250-500 ltrs, setting aside (or lowering if required) for,repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately) incl Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc mentioning date of cleaning with synthetic enamel paint complete all as specified and directed.

Disconnecting existingtanks of cap Exc 500 ltrs but not exc 1000 ltr, setting aside (or lowering if required) for,repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately)incl Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc mentioning date of cleaning with synthetic enamel paint complete all as specified and directed.

Supply & fixing of framed work such as grills, gratings, cooler stands etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde E-165 incl necessary fixing to walls complete all as specified and directed.

Fabrication & fitting with cabinet / shelves & wardrobe / cupboard made out nof 18mm thick (one side decorative lamination & other side balancing lamination ) PVC sheet with piano hinges including providing cabinet for keeping baskets / cutlery basket with handles door shutters complete all as specified and directed. Note : PVC sheet, fittings & fixture will be measured and paid separately).

Supply only 18mm thick (one side decorative lamination & other side balancing lamination sheet) solid PVC board of make : Rajshree or equivalent all as specified and approved by Accepting Officer with cement solvent adhesive for shutter / kitchen cabinet / cup boards / partition wall / wall cabinet and similar work complete all as specified and directed.

Supply and Fixing in repairs 12mm thick (one side decorative lamination & other side balancing lamination sheet density 600kg/m3) solid PVC board with edge bending on edges with cement solvent adhesive for shutter / kitchen cabinet / cup boards / partition wall / wall cabinet and similar work complete all as specified and directed.

S & F in repair stainless steel Soft Close hinge with assembly, complete all as specified and directed.

S & F in repair 125 mm dia oval shape brass handle fancy type bright finish complete all as specified & directed.

S & F in repairs 30 mm when Continuous (piano) hinges, mild steel, bright finish or electro galvanised complete all as specified and directed.

S & F in magnetic ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and directed.

S & F framed work as in roof trusses purlin, rafter and batterns of angle or other section with gusset plates , rails , braces, etc complete of Fe 410-W (Gde E-250) , drilling for fixing of steel sheeting or other covering doors etc to be prepared for hanging complete all as specified and directed.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces upto 3 storey height complete all as specified and directed.

Taking down carefully aluminium/copper point wiring (light, fan, socket or power) of any type complete including fittings and fixtures such as switches, ceiling roses, pendants, holders, sockets, light fittings, removing materials to store for keeping in safe custody or for taking credit and making good the disturbed surfaces of walls/ceiling/floor at various site etc complete all as specified and directed.

Disconnecting of unserviceable sub main wiring of 4 Sqmm size including conduit of any type and accessories & removing from site and making good the disturbed surfaces complete all as specified and directed.

Disconnecting of unserviceable sub main wiring of 6 Sqmm size including conduit of any type and accessories & removing from site and making good the disturbed surfaces complete all as specified and directed.

Disconnecting electric connections and taking down old unserviceable MCB DBs of any type including MCBs DB/TPN DBs including MCCB of any capacity complete all as specified and directed.

Taking down carefully by unscrewing from boards / outlet boxes, light fittings and fixtures such as tube light fittings, bulk head fittings, mirror light, bldg sec light etc for re use at site or carrying to the store (To be measured only when found serviceable in all respects complete for re use.) complete all as specified and directed.

M & L for point wiring with 1.5 Sqmm. (nominal area) single core PVC insulated 1100 Volts, grade multi stranded FRLS copper conductor unsheathed in and including non metallic rigid PVC concealed conduit 20 mm dia or higher complete with all PVC conduit accessories such as socket, elbow, junction box, bell mouth, reducer, bend and flexible conduit etc./ fittings ISI marked and sunk type pressed steel anodised terminal box with bakelite laminated sheet top cover 3 mm thick, brass screws and cup washers including one green colour cable of same size as earth wire up to common earth and connected to earth dolly of following.

One light point/bell point controlled by one way 5 Amps single pole switch, complete all as specified and directed.

One ceiling fan/exhaust fan point controlled by one way 5 Amps single pole switch, complete all as specified and directed.

One 5 pin 5 Amps socket outlet on same board with other switch, complete all as specified and directed.

One 5 Pin 5 Amps socket outlet on independent board with other switch, complete all as specified and directed.

One light point controlled by two, 2-way switches complete all as specified and directed.

All as per item No 156 above but with 2.5 Sqmm single core multi stranded PVC insulated unsheathed (FRLS) cable for 15 Amp socket outlet on independent board complete all as specified and directed.

M & L for point wiring with 1.5 Sqmm. (nominal area) single core PVC insulated 1100 Volts, grade multi stranded FRLS copper conductor unsheathed in and including PVC casing & caping with all PVC casing caping accessories and sunk type pressed steel anodised terminal box with bakelite laminated sheet top cover 3 mm thick, brass screws and cup washers including one green colour cable of same size as earth wire up to common earth and connected to earth dolly of following:-

One light point/bell point controlled by one way 5 Amps single pole switch, complete all as specified and directed.

One ceiling fan/exhaust fan point controlled by one way 5 Amps single pole switch, complete all as specified and directed.

One 5 pin 5 Amps socket outlet on same board with other switch, complete all as specified and directed.

One 5 Pin 5 Amps socket outlet on independent board with other switch, complete all as specified and directed.

All as per item No 158 above but with 2.5 Sqmm single core multistranded unsheathed (FRLS) cable for 15 Amp socket outlet on independent board, complete all as specified and directed.

Supply and fixing of switch piano type, flush button single pole, one way 5 Amps, complete all as specified and directed.

Supply and fixing of switch piano flush type, 5 Amp , 240 volt , single pole, two way switch, complete all as specified and directed.

Supply and fixing of switch piano flush type 15/16 amps, single pole one way 240 volts complete all as specified and directed.

Supply and fixing of switch bell push, flush type, 5 Amp, complete all as specified and directed.

Supply and fixing of socket outlet 5 Amps, 5 Pin, flush type, complete all as specified and directed.

Supply and fixing of socket out let 2 in 1,multipurpose 3 pin 15/16 Amp flush type complete all, as specified & directed.

Supply and fixing stepped type (switch type) electronic ceiling fan regulator flush type, AC, 230 volts, complete all as specified and directed.

Supply and fixing of ceiling rose, surface type bakelite 65x17.5 mm, three terminals, and complete all as specified and directed.

Supply and fixing of door bell electric, ding dong type, AC 230 volts, single phase , complete all as specified and directed.

S & F of lamp holder PVC/polycarbonate type with back plate complete all as specified and directed.

S & F in repair LED tube light fitting in acrylic linear tube (1x 18 watt), 230V for single LED tube light including 1 x 18 W LED retrofit bar professional CW 6500 K cover channel, pin holders, LED power driver, connector block, etc complete with all accessories internally prewired and including connecting up with three core flexible copper conductor cable with suitable size for connection of fitting from ceiling rose complete all as specified and directed.

Supply and fixing in repair LED mirror light fitting, 10 watt, 600 mm length complete with all accessories pre-wired and including connecting up with flexible copper conductor cable with suitable size complete all as specified and directed.

Supply and fixing in repair LED light fittings, 10 W bulk head luminaries 230V, 50 Hz complete with all accessories and including connecting up with three core copper conductor cable with suitable size complete all as specified and directed.

Supply and fixing in repair testing and commissioning energy saving bldg sec light luminaire 35 watt LED, pressure die cast housing with epoxy powder coated with colour finish and prismatic poly carbonate coverlic cover complete, IP 66/65 protection incl connecting with three core copper flexible wire from ceiling rose to connector of light fitting complete all as specified and directed by Engr-in-Charge.

Supply and fixing recess mounted LED edge lit slim downlight 12 watt round shaped ,die-cast aluminium housing finished in white powder coating incl driver, efficiency 100 Lm/w complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repair recess mounted 2' x 2' LED luminarie 36 watt, cool day/warm white light with white powder coated CRCA housing with LED driver, efficiencey >100 Lm/w complete all as specified and directed.

M & L for Submain wiring with two single core PVC insualated, unseathed, FRLS, 1100 volts grade 6 Sqmm multi stranded copper conductor cable drawn through and including 25 mm dia PVC non metallic rigid conduits and the conduits accessories incl one run of green colour earth continuity conductor with 6 Sqmm multi stranded copper conductor cable, in concealed conduit in wall/ roof/ ceiling, complete all as specified and directed. Note: - Two run of single core cable, one run of earth continuity conductor shall be measured as one unit length.

M & L for Submain wiring with two single core PVC insualated, unseathed, FRLS, 1100 volts grade 6 Sqmm multi stranded copper conductor cable drawn through existing concealed conduit incl one run of green colour earth continuity conductor with 6 Sqmm multi stranded copper conductor cable complete all as specified and directed. Note: - Two run of single core cable, one run of earth continuity conductor shall be measured as one unit length.

M & L for Submain wiring with two single core PVC insualated, unseathed, FRLS, 1100 volts grade 4 Sqmm multi stranded copper conductor cable drawn through existing concealed conduit incl one run of green colour earth continuity conductor with 4 Sqmm multi stranded copper conductor cable complete all as specified and directed. Note : - Two run of single core cable, one run of earth continuity conductor shall be measured as one unit length.

S & F of MCB SP, 240 volt, 6 Amp to 32 Amp capacity, 10 KA, 'C' Type instantaneous tripping complete all as specified and directed.

Supply and fixing of MCB SPN 10 to 40 Amp capacity, 10KA , 'C' Type instantaneous tripping complete all as specified and directed.

Supply and fixing of MCB SPN 63 Amp capacity, 10 KA , 'C' Type instantaneous tripping complete all as specified and directed.

Supply and fixing of MCB TPN 63 Amp capacity,415 volt 10 KA , 'C' Type instantaneous tripping complete all as specified and directed.

Supply and fixing of MCB TPN 100 Amp capacity, 415 volt, 10 KA , 'C' Type instantaneous tripping complete all as specified and directed.

S & F MCB distribution board single pole & neutral with 200 Amps rated bus bar, double door, IP-43, DB's made out of CRCA sheet steel enclosure, recessed type, factory made powder coated, 8 way, 240 volts suitable for housing MCB's and isolator's complete in all fixing material/accessories etc complete all as specified and directed. Note : MCB DB and MCB will be the same make.

S & F MCB distribution board single pole & neutral with 200 Amps rated bus bar, double door, IP-43, DB's made out of CRCA sheet steel enclosure, recessed type, factory made powder coated, 12 way, 240 volts suitable for housing MCB's and isolator's complete in all fixing material/accessories etc complete all as specified and directed. Note : MCB DB and MCB will be the same make.

S & F MCB distribution board single pole & neutral with 200 Amps rated bus bar, double door, IP-43, DB's made out of CRCA sheet steel enclosure, recessed type, factory made powder coated, 4 way, 240 volts suitable for housing MCB's and isolator's complete in all fixing material/accessories etc complete all as specified and directed. Note : MCB DB and MCB will be the same make.

S & F of MCB distribution board triple pole & neutral IP-43 double door metal, 4 way ,415 volt made out of CRCA sheet steel , factory made powder coated with insulated bus bars , shrouded neutral bars, earth bars , made out of sheet steel enclosure, recessed type, factory made powder coated suitable for housing MCB's complete all as specified and directed. Note: MCB DB and MCB SP/SPN will be the same make.

M & L for earthling complete with GI earth plate electrode 60 cm x 60 cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level connected to GI lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electric plate No 3 of SSR Part-I connected to continuous earth wire on main switch board all as specified or indicated and testing on completion including provision of earth wire protection by 15 mm dia medium grade GI pipe and watering pipe shall be 20 mm bore, medium grade including excavation & earth work in any type of soil & disposal of soi, providing alternate layers of charcoal and common salt, constr of PCC earth chamber in mix 1:3:6 type C-1 with 40mm thick RCC 1:2:4 type B-1 cover with handle made out oof 8mm dia bars, watering arrangement with funnel & wire mesh, complete all as specified and directed. Note. The unit rate includes for protection pipe and GI wire 4.00 mm from top of earth plate up to 7.5 meter above ground level.

S & F in repair single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole 20 Amp MCB SP `C' type instantaneous for geyser & AC complete all as specified and directed.

VIPRABANDHU CONSTRUCTIONS (BID ID -3366731)

Shree Sai Ram Enterprises (BID ID -3372928)

TANISHQ ENTERPRISES (BID ID -3375113)

SHREE BALAJI TRADING CORPORATION (BID ID -3367368)