Providing wbm and bt surface on MNSH 4 to munage sawantwadi marg VR 324 km 0/00 to 0/650 tal devgad

Providing and fixing name board of size 1.00 x 1.08 mt of M.S.steel flat sheet 25x25x3 mm angle including painting and lettering etc.complete.(Rate Analysis)

Excavation for Catch/side water gutter in murum strata including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m.and spreading for embankment or stacking as directed.

Excavation for road way in hard murum and boulder including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m.and spreading for embankment or stacking as directed.

Conveying materials obtained from road cutting including all lifts, laying in layers of 20 cm. to 30cm. breaking clods, dressing to the required lines, curves, grades and section, watering and compacting to not less than 97 % of standard proctor density for a lead of 300m. to 500m. inclusive, from the site of excavation to the site of deposition as directed.

Supplying 80 mm Laterite Stone Metal at the roadside for metal including conveying and stacking etc complete. R.A.

Supplying trap/granite/quartzite/gneiss stone metal of required size by bringing the boulders/Rubble at the road side breaking them to required gradation including conveying the boulders/Rubble and stacking the broken metal etc complete.(prior approval of sample stack of broken metal by the Ex. Engineer is necessary the date of approval will form part of the measurement) 40 mm metal by breaking boulders (Hand broken)

Supplying Hard murum at the road side, including conveying and stacking etc. complete (50 m initial lead)

Spreading oversize 40 mm / 50 mm / 60 mm / 80 mm metal including sectioning, etc. complete

Spreading gravel / hard murum / soft murum & stone dust over the rubble soling, over size & size metal layer / blindage on WBM surface etc. complete

Compacting 80 mm laterite metal with power roller including necessary labour,materials and artifitial watering etc. complete.

Compacting Subgrade / gravel / Oversize metal (100 mm loose ) layer 2.00 to 7.00 m wide with static roller including necessary labour material and artifitial watering etc. complete.

Providing and constructing 50 mm. thick Modified Penetration Macadam (MPM) road surface including all mataerials, preparing the existing road surface, spreading 40mm. stone metal layers 100% crusher broken metal with conical crusher plant heating and spraying the bitumen of specified grade @ 1.75 kg/sqm, spreading 12mm.size chips compacting with static roller having weight 8 to 10 MT. to achive the desired degree of compaction as per Technical Specification Clause 506 etc. complete. Including picking of existing WBM surface.(VG-30 bulk bitumen rates are considered to arrive at rates)

Providng 20 mm thick premix bituminous carpet including supplying all materials, preparing and cleaning the base, heating bitumen applying tack coat at specified rate, mixing hot bitumen and chips laying the carpet layer and compacting etc complete by bulk asphalt (Cold mix)

Providing bituminous type A liquid seal coat on bituminous surface including supplying all materials and bitumen of VG-30 grade preparing existing road surface heating and applying bitumen @ 0.98 kgsqm. By mechanical means spreading chips and rolling by static roller having weight 8 to 10 M.T. etc complete.

Providing soling using 80mm size trapmetal in layers 15cm each including filling voids with sand, ramming, watering etc complete.

Providing and laying cast in situ cement concrete M-10 proportion with trap/granite/quartizite/gneiss stone metal in foundation including necessary formwork compacting and curing etc complete(with reversible drum type mixer with SCADA with natural/VSI standard artificial sand)

Providing laterite stone masonry in cemen morter 1 : 6 in foundation & plinth including racking joints when plastering is to be done / striking joints when no plastering is to be done watering and scaffolding. P/I - Circular No.1 / 5. (R.A)

Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete.

Providing and laying cement concrete pipes of IS 458-2003 NP II 600 mm Class in proper line level and slope including providing fixing collars in cement morter 1:2 etc.