Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.5 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹39.7 L+₹94,045 (2.43%)Rejected-Finance | L2 | Rejected-Finance Not lowest | |
| 3 | L3₹46.7 L+₹8.0 L (20.6%)Rejected-Finance 402 C WING BUILDING NO 86 NAVRANG CO OP HSG SOCIETY LTD TILAKNAGAR CHEMBUR MUMBAI 89 | MUMBAI | MUMBAI | MAHARASHTRA | 400089 | L3 | Rejected-Finance Not lowest |
Tender Value
₹49.5 L
EMD Value
₹99,000
Closing Date
7 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE I R and D Kanchanbagh
GE I R and D Kanchanbagh Kanchanbagh Post Hyderabad 500058
PETTY REPAIRS TO B/R ASSETS FOR CE RND AND DMDE OFFICE COMPLEX INCLUDING RESIDENTIAL AREAS AT AGE B/R II RND SECUNDERABAD
2023_MES_594703_1
GE I KBAGH TOKEN 10 OF 2023 2024
Open Tender
Civil Works
Item Rate
270 days
GE I R and D Kanchanbagh
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
Yes
GE I R and D Kanchanbagh
₹99,000
Yes
30 Jun 2023
11 May 2023
9 Jun 2023
11 May 2023
7 Jun 2023
25 May 2023
11 May 2023 - 18 May 2023
Amount
Attending day to day complaint related to carpenter works like Door /Window easing, Door/ Window repair, Cupboard repair, at any floor/ height, Repair/Replacement of hardware items/mirror/glass shelf etc.by deploying carpenter and helper complete all as specified and as directed.
Attending day to day complaint related to plumbing works like Repair / Replacement of bib taps/stop cocks/gate valves / pillar cocks/ float valves and removal of air lock / blockage in 15mm / 20mm bore GI/ UPVC/ CPVC water tubing cleaning the pipe and fittings etc and refixing the same in position and Repair / Replacement of Rain water pipes any dia etc and plumbing Repair / Replacement of sanitary fittings / plumbing fittings etc by deploying plumber and helper complete all as specified and as directed.
Attending day to day complaint related to any type of welding works n.exc 2.5cm in length and thick of metal to be welded n.exc 6mm thick like welding to steel frame works/ hinges/ glazing bars etc. by deploying welder and mazdoor. Note:- Welding rod machine misc required is deemed to be included in the quoted rates.
Attending day to day complaint related to sewage cleaning and removing blockage of kitchen/bath/IWC/EWC/ pipe line / manhole by deploying sweeper and incl sewage drain cleaning.
Notes for Ser item Nos 1 to 1.04 :-The quoted rate of contractor shall comprise the following :- (i) Contractor shall provide sufficient skilled and unskilled manpower on requirnment basis as directed by JE/Engineer in charge for attending and completing the complaints as per the users satisfaction. However, the number of skilled and unskilled manpower shall be increased as directed by enginner in charge depending upon the requirements/ number of complaints registered at the complaint center. In case of failure on providing sufficiet manpower by the contractor, a penalty at the rate of Rs.1000 per skilled person per day per complaint and Rs.600 per unskilled person per day shall be levied on the contractor and recovery for the same shall be affected from contractor's dues.
(ii) Complaints cell for receiving complaints from users shall be opened by the contractor from 09.00 am to 0 5.00 pm at MES service centre of AGE B/R II Secunderabad office under GE (R&D) Kanchanbagh. The complaints pertaining to sewage cleaning and opening of blockage and plumbing works etc. against serial item No 2 and 4 shall be attended and completed within 36 hours and other complaints related to carpenter works and welding works against serial item Nos 1 & 3 shall be completed in 48 hours time after lodging/ receipt of complaints. Contractor shall ensure that all the complaints shall be attended and completed within above prescribed schedule/ time period, failing which, a penalty at the rate of double the quoted rate for that particular trade work/complaint per day till the satisfactorily completion of complaint shall be levied on the contractor and recovery for the same shall be affected from contractor's dues.
(iii) : For each complaint in different location, a separate docket slip shall be prepared by the contractor/ his representative and handed over to related tradesman, etc. for attending the complaint and after satisfactorily completion of complaint, docket slip shall be submitted to concerned executive on the date of register of complaint, which shall be got signed from the occupant.
(iv) : Format of docket slip and complaint register which shall be kept in complaint cell. Stationery i.e. Docket slips, complaint registers, Store issue register etc. shall be provided by the contractor without any extra cost to the department and cost thereof shall be deemed to be included in quoted rates by the contractor against respective items of schedule 'A'. Contractor/His authorised rep shall be Collect / Replace the complaint registers every day (Except Sunday) from SAGAR Enclave, VARUN Vihar and DMDE/ Transit Offrs Mess and Complaint slip shall be prepared at AGE B/R II Secbad office and handed over to the tradesmen and necessary entry (Docket no & Date) shall be made in the complaint register and submit to concerned JE same day.
(v) : Necessary transportations, tools, plants, ladders, cleaning rods/Bamboos, etc. including nails, screws, wooden/Plastic gatta, Glass putty, PVC washers and spindles for bib taps/Wall mixer/ stop cocks/ pillar cocks, cotton thread/Tefflon tape, M seal, White cement, Jumper valves, white lead, flush washers, rawel plugs and other similar minor accessories ( except items mentioned against Srl item Nos 5 to 61 herein after ) required to complete the jobs/complaints shall be provided by the contractor without any extra cost to the department and cost thereof shall deemed to be included in quoted rates by the contractor against respective item of schedule 'A'.
(vi) : All the skilled tradesmen of individual trade shall possess certificate from ITI/NICMAR/similar reputed and recognised institute by state/central Govt or having 10 years experience in the concerned individual trade and contractor shall submit the same to engineer in charge for the verification.
(vii) : In case of welding to steel items required to rectify/ complete the complaints, the welding set and welding rods shall be provided by the contractor without any extra cost to the department and cost thereof shall deemed to be included in qouted rate of contractor against srl item no 4 of schedule 'A'.
(viii) : Materials mentioned against serial item Nos 65 to 126 hereinafter required for execution of complaints shall be supplied by the contractor and paid separately under respective items of schedule 'A' as supply only.
Supply only following materials required for attending day to day complaints against serial items 1 to 4 here in before all as specified and directed. Notes for Srl item Nos.62 to 123 : - (i) The make and brand of items shall be as mentioned in the Appendix 'B' of tender documents and as approved by GE. (ii) Materials supplied by the contractor shall be deposited first in store yard of AGE B/R Secbad and same shall be issued by the department to the contractor/his authorised rep on daily basis as per nature of complaint and as required at site.
Supply only 16 mm bore of CPVC pipes SDR 11 & plain fiitings and fixed complete to wall or laid in floor complete all as directed.
Supply only 20 mm bore of CPVC pipes SDR 11 & plain fiitings and fixed complete to wall or laid in floor complete all as directed.
Supply only 16mm Brass elbow suitable for 16mm bore CPVC pipes including fixing to the pipes complete all as specified and as directed
Supply only 20mm Brass elbow suitable for 20mm bore CPVC pipes including fixing to the pipes complete all as specified and as directed
Supply only 16mm Brass Tee suitable for 16mm bore CPVC pipes including fixing to the pipes complete all as specified and as directed
Supply only 20mm Brass Tee suitable for 20mm bore CPVC pipes including fixing to the pipes complete all as specified and as directed
Supply only 20mm Male brass threaded adaptor suitable for 20mm bore CPVC pipe including fixing to pipe complete all as specified and as directed
Supply only 20mm female brass threaded adaptor suitable for 20mm bore CPVC pipe including fixing to pipe complete all as specified and as directed Make for item 5 to 12 : Prince/Astral/Sudhakar/Aashirvad.
Supply only 32 mm bore PVC waste pipe for WHB complete all as directed
Supply only 40 mm bore PVC waste pipe for urinals/sink complete all as directed
Supply only waste fitting brass chromium plated 32mm dia for wash hand basin all as specified and directed
Supply only waste fitting brass chromium plated 40mm dia for sinks all as specified and directed
Supply only 10 Litre capacity PVC low level flushing cistern with ball valve and handle/ push button 32mm dia PVC flush pipe.
Supply only 100 mm dia stainless steel grating for nahani traps with or without hole as required for waste pipe complete all as directed
Supply only handles suitable for PVC low level flushing cistern of any type complete all as specified and directed.
Supply only tubular towel rail 20 mm dia D type brass chromium plated type 60 cm long between the flanges.
Supply only 15 mm float valve for low level flush tank. Make:- Super flow or equivalent
Supply only PVC Syphon for low level flushing cistern assembly Make : Super flow or equivalent make
Supply only 15 mm dia PTMT ball valve, high pressure with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe. Make: Prayag, Polytuff
Supply only 20 mm dia PTMT ball valve, high pressure with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as directed. Make: Prayag, Polytuff
Supply only PVC connection15 mm x 600 mm with both side check nuts and washer compactable with hot & cold water.
Supply only 15 mm bore dia angle valves, cast copper alloy,chromium plated fancy type, screwed down, high pressure, with capastan head, and screwed both ends.
Supply only 20mm bore gun-metal globe or gate valves, with iron wheel head screwed both ends for iron pipe and fixed to bore of pipe 20 mm complete all as directed
Supply only Plastic water closet seat, closed pattern with flat bottom and cover fixed with MS chromium plated hinging devise.
Supply only viterous china WHB white flat back size 550 mm x 400 mm with brackets for fixing.
Supply only 125 mm dia brass chromium plated shower rose with swivel joints and stainless steel arm complete
Supply only pillar taps of 15 mm bore fancy type cast copper alloy with capstan heads, chromium plated,screwed down high pressure with or without lettered hot cold with long screwed shanks and fly nuts screwed for iron pipe complete all as directed
Supply only CP brass two way bib tap of 15mm bore dia with capastan head, complete all as specified and directed.
Supply only CP brass 3 in 1 wall mounted mixture with telephone hand shower complete..Make: Jaquar/Hindware/Parryware
Supply only CP telephone hand shower complete. Make:Jaquar/Hindware/Parryware
Supply only Health faucet,case-copper alloy, chromium plated including all necessary fittings complete all. Make:F160013CP of Hindware or equivalent.
Supply only 15 mm bore bib taps, cast copper alloy chromium plated long body fancy type with capstan head, screwed down.
Supply only 15-mm bore bib taps, cast copper alloy chromium plated fancy type with capstan head, screwed down.
Supply only PVC bathroom cabinet with looking mirror of size 500 mm x 400 mm x 140 mm complete. Make : Commander, Prayag
Supply only 40mm dia mild steel, bright finished cup board knobs with nuts and screws.
Supply only stainless steel wire cloth 304 grade stainless steel with 0.254 mm (30 gauge) dia of steel wire and 0.95 mm width of aperature and fixed along with aluminium anodised mesh of size 10x10x1.0mm thick fixed with tinned tacks or galvanised wire staples etc.
Supply only 100 mm butt hinges, medium weight, cold rolled mild steel.
Supply only 125 mm size extruded aluminium alloy handles, fabricated type with plate, matt or anodised finish.
Supply only floor door stopper of alumium alloy body with double legs and 140 mm long with screws to shutters.
Supply only floor door stopper of brass body and tongue and with hard drawn steel spring 140 mm long with screws.
Supply only curtain rod 25 mm dia stainless steel of grade 304 with end finials etc.
Supply only stainless steel bracket of grade 304 suitable for 25 mm dia curtain rod fixed in position with stainless steel screws complete.
Supply only Brass cupboard locks heavy duty of size 75mm and 4 levers with duplicate keys complete. Make: Godrej/Link/Sheel
Supply only stainless steel peg set of 06 hooks.
Supply only 12mm Plywood 7 layer grade BWR type BB.
Supply only 6mm Plywood 7 layer grade BWR type BB fixed in repairs with screw to timber frame work .
Supply only stainless steel kitchen rack of thickness 0.60 to 0.70mm and outer dimention 900mm x 900mm x 250mm complete.
Supply only MS powder coated curtain rod 25 mm dia of standard thickness and one pair of suitable brackets complete.
Supply only MS powder coated fancy type curtain brackets for 25 mm dia curtain rod and fixed with screws and PVC sleeves complete.
Supply only Rotational moulded polythylene water storage tanks,three layers white in colour (Cylindrical vertical with threaded lid) hoisted and fixed in position, 500 litres capacity.
Supply only Rotational moulded polythylene water storage tanks,three layers white in colour (Cylindrical vertical with threaded lid) hoisted and fixed in position, 750 litres capacity.
Supply only Rotational moulded polythylene water storage tanks,three layers white in colour (Cylindrical vertical with threaded lid) hoisted and fixed in position, 1000 litres capacity.
Supply only Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, 250 mm length of bolt complete.
Supply only mild steel door spring 200 mm long including roller and roller plate complete.
Supply only brass mortice lock 100mm long vertical type 4 levers fixed to shutter with 2 duplicate keys with handles complete. Make: Godrej/Link/Sheel
Supply only SS cylindrical lock suitable for 30 to 40 mm thick shutter with duplicate keys complete. Make: Godrej/Link/Sheel
S&F 3mm thick plain gass ordinary quality and glazing with oil putty in square n. exc 0.5 Sqm in each pane incl raking out old glass complete all as specified and as directed .
S&F 5.5mm thick plain gass ordinary quality and glazing with oil putty in square n. exc 0.5 Sqm in each pane incl raking out old glass complete all as specified and as directed .
S&F 3mm thick figured glass, pin headed type and glazing with oil putty in square n. exc 0.5 Sqm in each pane raking out old glass complete all as specified and as directed .
S&F in repairs PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to walls as in rain water pipes complete all as directed
S & F in repairs PVC (SWR) bends 110mm bore any radius for rain water pipes complete all as directed
S&F PVC (SWR) pipes,150 bore of pipe, single socketed, in any length with rubber ring joints, fixed in position including making necessary holes in walls or parapet and making good with cement mortar 1:4 and taking down old rain water pipe of any description and in any position complete all as specified and directed.
S&F in repairs 150mm PVC (SWR) bends any radius complete all as directed
S&F in repairs vitreous China wash down water closet pan (Pedestal Pattern) with P or S trap, white including fixing bolts, plastic water closet seat, White, closed pattern, solid type with flat bottom, and cover and mild steel chromium plated hinging device and flush pipe complete all as directed. Make: Parryware/ Hindware/ Cera
S&F in repair viterous china water closet Orissa pattern of 580 mm x 440 mm white with intergral foot rests including provision of P or S trap including connection to flushing pipe and complete making good to floor all as directed. Make:Parryware / HIindware/ Cera
S&F in repairs viterous china WHB white flat back size 550 mm x 400 mm excluding taps and including brackest , waste coupling , waste pipe and PVC connection and including cutting for & pinning in ends of brackets complete all as directed. Make:Parryware/ Hindware/ Cera
M&L for Brick work with sub-class `B' bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar (1:6) as in parapets of two to three storeyed buildings including demolition of brick work built in cement mortar complete all as specified
Taking down cement plaster on brick or stone walls,ceiling etc. including raking out joints, hacking for key, scrubbing down with water, etc.and removing debris outside MOD premises complete all as specified and directed
M&L 15mm thick rendering in cement mortar (1:6) on brick work or concrete surfaces, finished even & smooth surfaces without using extra cement complete all as specified.
M&L for preparation of new plastered or un-plastered surface of walls and applying three coats of white wash on walls complete all as specified and directed.
M&L preparation of new plastered surfaces or unplastered surfaces of walls and applying two coats of OBD as per manufacturers instructions over a coat of true care wall primer over two coats of birla putty 1.5mm each to level the surface and finshied smooth with emery paper No.180 followed by emery paper No.320 or 400 and wipe it clean complete all as specified and directed. Make:- TRACTOR EMULSION of ASIAN PAINTS /JOHNSON & NICHOLSON (JOHNSOLIN)/ BERGER PAINT
M&L for preparation of new old plastered surfaces and applying two coats of Apex ultima exterior paint as per manufacturers instructions over a coat of true care exterior wall primer complete all as specified and directed. Make:- APEX ULTIMA of ASIAN PAINT/ WEATHER COAT SMOOTH(BERGER PAINTS)/ WEATHER SHIELD MAX EXTERIOR ACRYLIC(DULUX)
Demolition of cement concrete (un-reinforced) in Ground floors and paving n.exe 15cm thickness ( below or above ground level ) including removal of rubbish out side complex (MOD land), complete all as specified and directed.
M&L cement concrete 1:3:6 type C-1 (using 20mm graded aggregate) 75 mm thick as in plinth protection surface finished even and fair without using extra cement complete all as specified and directed.
M&L for Non- skid coloured ceramic tiles of any design and pattern, 300X300X7 to 8 mm thick, in floor etc incl 15mm thick screed bed in CM 1:6, Set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles.Tiles shall be confirming to IS-15622.2006, Group B II with average water absorption between 3% to 6%. Length, width and straightness of sides + 0.10% (Max deviation). Thickness + 5.0% (Max deviation). Centre & Edge curvature and warpage + 0.50% (Max deviation). Breaking strength 1000 N (Minimum) and minimum 95% tiles shall be free from visible defects including dismantling existing tile work with screed bed. Note:- Shade of the tiles including Colour, design and pattern shall be approved by AGE. Complete all as specified and directed
M&L for coloured glazed ceramic tiles of any design and pattern, 300x450x 7 to 8 mm thick, as in dado etc incl 10 mm thick rendering in CM 1:4, Set and jointed in neat cement slurry and pointed in white of coloured cement to match the shade of the tiles . Tiles shall be confirming to IS-15622:2017, Group B III with average water absorption between 10% to 15%. Length, width and straightness of sides + 0.20% (Max deviation). Thickness + 4.0% (Max deviation). Straightness of sides and Rectangularity +0.15% (Max Deviation). surface flatness + 0.22% (Max deviation). Breaking strength 500 N (Minimum) and minimum 95% tiles shall be free from visible defects including dismantling existing tile work with plaster. Note: Shade of the tiles including Colour, design and pattern shall be got approved by AGE(I).Complete all as specified and directed
M&L for light coloured vitrified tiles of any design and pattern, 600x600x9 to 10mm thick, as in floor and skirting etc incl 15mm thick screed bed in CM 1:6 Set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles. Tiles shall be confirming to IS-15622:2017, Group B1b with average water absorption between 0.08% to 3%. Length, width and straightness of sides + 0.10% (Max deviation). Thickness + 4.0% (Max deviation). Centre & Edge curvature and warpage + 0.20% (Max Deviation). Breaking strength 1200 N (Minimum) and minimum 95% tiles shall be free from visible defects including dismantling existing tile work with screed bed. Note:- Shade of the tiles including Colour, design and pattern shall be approved by GE .Complete all as specified and directed
All as per srl item No. 82 above but as in skirting and vertical surfaces, set and jointed in neat cement slurry and pointed with white or coloured cement laid over 10 mm thick backing coat of cement mortar 1:4 including dismantling existing tile work with plaster complete all as specified and directed.
Taking down shutters of any description exc 1 sqm and nexc 2 sqm each complete all as directed
S & F 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides.
S&F 35mm thick factory made 2nd class HW glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, gauze etc size of members as specified in SSR part-I, section 8, clause 8.24(a) supplied and fixed to chowkats, including M&L for providing members of wooden stiffeners of size 60x30mm horizontally and vertically to each top panel and vertically to each bottom panel of wire gauge shutter complete all as specified and directed
S&F stainless steel wire cloth 304 grade stainless steel with 0.254 mm (30 gauge) dia of steel wire and 0.95 mm width of aperature and fixed along with aluminium anodised mesh of size 10x10x1.0mm thick fixed with tinned tacks or galvanised wire staples etc as in panels of wire gauzed shutter complete all as specified and directed.
S&F aluminium handles cast type anodised 200 mm ISI Marked complete all as specified and directed.
S&F 200mm aluminium anodised barrel tower bolts of extruded section ISI Marked complete all as specified and directed.
S&F floor door stopper of alumium alloy body with double legs and 100mm long fixed with screws to shutters complete all as specified and directed.
S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, 250 mm length of bolt complete all as specified and directed.
S & F mild steel door spring 200 mm long including roller and roller plate complete all as specified and directed.
Disconnecting existing tanks n.exc 500litres, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position including Bio Wash, Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc.
Dismantling timber scantlings in fillets,rails,posts,rafters,purlins etc under 40 sq cm in section, in any position unframed work.
S&F MS framed work as in tubular trusses, purlins, posts and the like fixed with angle cleats and connecting plates etc. including necessary cutting and welding etc fixed in position as specified.
S & F in repairs Pre-painted galvalume aluminium zinc coating AZ-150 GI based corrugated steel sheet 0.50mm thick of any colour (ISI Marked) having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.
S&F in repairs Pre- painted galvatume aluminum zinc coating AZ-150 GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in valley gutters of four storeyed building, fixed to existing sheeting supports including necessary scaffolding complete all as specified and as directed.
M&L in repairs 19mm thick pre-laminated particle board exterior grade pre-laminated on both sides with decorative choice lamination and other side balancing white lamination with round beading fixed with screws to timber frame work as in cup board shutters, pelmet boxex, shelves and similar items, including taking down old laminated work of any description complete all as directed
M&L preparation of new wood or wood based surfaces of any description, not otherwise descri-bed, over 10cm width or girth and applying pink primer and one coat of synthetic enamel paint.
S&F in repairs venetian blinds vertical type 100mm width with polyester fabric of approved colour & pattern including powder coated aluminium fittings of top rail .weight and nylon button /loops etc fixed complete all as specified and as directed. Make : VISTA/ LEVADOR/ AMAR
M&L for PU coated machine pressed precast concrete paver block of approved tint, shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade, as in floors/pavings laid over 40 mm thick sand cushioning layer including dismantling existing floor tile of any description complete in all respect and all as specified. Make : NAVEEN/SPARTEK/NITC
M&L PU coated machine pressed cement concrete tiles 30cm x 30cm x22 mm thick with grey cement and pigment set jointed and pointed in neat cement slurry in floors laid over 20mm thick screed or bedding layer in CM 1:6, including dismantling existing floor tile and screed bed of any description complete all as directed by Engr-in-charge Make : NAVEEN/SPARTEK/NITCO
S&F in repairs false ceiling with light weight calcium silicate tiles of spin tone surface textured 'Aerolite' make or equivalent of size 595*595mm having 15mm thick densified micro look edge in true horizontal level suspended on shilhouette profile suspension system of Grid made from hot dipped G.I steel section potary stitched double webbed power coated white consisting of main T-runner 42mm*14mm and 0.30mm thick and cross T of size 33mm*14mm and 0.30mm thick placed at 60cm centre to centre having width of flange 14mm with a 6mm reveal profile, (Black). The Grid system to be rested on the periphery wall/ partitions on a w-profile wall section made of precoated galvanized steel of dimension 3.0m long *(15mm + 10mm) *22.5mm and laying false ceiling for services like diffusers grills including cutting, making opening for services like diffusers frill light fitting, fixtures smoke detectors etc. Wherever required, main T-runner to be suspended from ceiling using G.I soffit cleats of size 25mm*35mm*1.6mm fixed to ceiling with 6mm dia and 50mm long dash fastener, 4mm dia G.I adjustable rods with galvanized level adjustment clips spaced as required at any heights as per specifications, including taking down existing ceiling board with frame work complete all as per direction of Engineer-in-charge.
Supply and fix in repairs water closet (pedestal pattern) coloured with combined flush tank (Cascade type) with Lid, seat cover, cistern fittings and all accessories complete all as specified and as directed MAKE: CAT No 92071 of HINDWARE (S-10) plaster colour or equivalent in PARRYWARE/CERA as approved
Supply and fixing in repairs vitreous china urinal, half stall type, white (excluding flushing cistern, flush pipe and waste pipe) including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screw, pointing around urinal back in cement with grating and union for discharge pipe and including provision of brass urinal spreader, CP waste coupling and PVC waste pipe complete all as specified and as directed Make: F60002 of Hindware or equivalent as approved
M&L for PCC 1:2:4, type B-1 (using 20mm graded stone aggregates), nexc 100mm thick as in levelling course over roofs incl demoition of old cement concrete including cleaning/removal of vegetation,plants/ tree cutting over roofs,trimming of branches obstructing the work complete all as specified and as directed
(a) M&L for removal of existing water proofing treatment along with screed complete and cleaning the surface, removing dust, dirt, loose particles and unsound substrate and providing 15mm thick cement screed (1:4) mixed with Dr Fixit water proof compound as per manufacturer's direction. (b) Applying primer coat with solvent based bitumen primer @ 0.30 ltr/ Sqm (c) Align Dr Fixit/STP torch shield water proofing 3mm thick membrane weighing not less than 3.50 Kg/Sqm using gas burner to heat substrate, pressing firmly from lower end to upper end with 100mm over lap. (d) Heat both overlap with round trowel to seal over lap excess compound smoothened, pressed into seam using hot trowel. (e) Seal edges well into grooves & protect with CM 1:2 (f) Applying two coats of aluminium paint over APP membrane complete.
M&L Hydraulically pressed plain cement concrete tile of size 250x250x19/20mm laid over & including cement mortar screed 15mm thick in CM 1:6 mixed with water proofing compound and jointed pointed in CM 1:3 mixed with 5% crude oil by weight of cement.
M&L 15 mm thick polymer modified plaster in CM (1:4) on fair face of brick or concrete surfaces in patches as in facias,fins,chajjas,parapets and similar locations, finished even and smooth without using extra cement and using SBR latex emulsion @ 4% by weight of cement all as specified. ( SBR latex shall be measured and paid separately)
M&L for MS framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; handrails; railings; framework of valley gutters and similar work con- forming to Fe.290.Gde-E-165de E-165 including dismantling of wrough iron complete all as directed.
M&L for prepration of new steel surfaces of any description not other wise described over 10 cm width or girth and applying two coat of synthetic enamel paint over one coat of red oxide complete all as specified and directed.
M&L providing cement concrete type B1, 1:2:4 (20 mm graded aggregate) in lintels upto 1.5 m clear span, cills,steps, bed blocks, holdfasts and like including weathering, slightly rounded or chamfered angles and throating incl demoition of old cement concrete complete all as directed.
M&L for preparation of old plastered surfaces of ceilings and applying one coat white wash on ceilings complete all as directed.
M&L for preparation of old plastered surfaces of walls and applying one coat oil bound distemper complete all as directed.
M&L for preparation of old plastered surfaces of ceilings and applying one coat of Oil bound distemper on ceilings complete all as directed.
M&L preparation of old plastered surface and applying two coats of Apex ultima exterior emulsion paint on walls all as specified and as directed.
S&F Powder coated of any colour (minimum thickness of powder coating 50 micron), aluminium door shutters, aluminium section weighing 0.55kg/m incl necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 nos in each door, hinges,anodised aluminium snap beading, screws etc. complete all as specified.
Supply & fixing of UPVC windows or UPVC framed portion 3 track 3 panel sliding window with two glazed and one wire mesh sliding shutters of profile width of from 40 mm to 45 mm, limit thermal conductivity to l.3 Kcal/sqm/hr centigrade, sound insulation up to 4-0 bds, Density, 1.46 gm/ml, Tenstile strength - 43.9N/sqmm, % Elongation at break - 215, Tenstile mpduls - 2840N/Sqmm, Flexural strength - 51N/sqmm, Heat aging at 150 degrees - No surface defect, Thickness - 2 mm, Flexural moduls elasticity 2200N / sqmm, double baskets & wool pile on window, multi point gear locking at different sides of frame, anti lift device on slide windows with temper proof screws with and including glazed shutter fixed with 5 mm thick plain sheet glass & wire mesh shutter with stain less steel wire cloth 304 grade stainless steel with 0.254 mm (30 gauge) dia of steel wire and 0.95 mm width of aperature complete all as specified.
M&L for 12 mm thick tinted toughned glass as in fixed glazing along with aluminium angle frame of size 35x27mm and fixed to walls using 80 mm long UPVC fastener and joints filled with silicon complete all as specified and directed.
S & F for Glazing with plain sheet glass, ordinary quality, 5.5 mm thick and glazing with oil putty or aluminium or PVC beading in square any size in each pane. Note :- The work carryout upto 4 story bldgs and rates are incl necessary eqpt and Scaffolding
S&F factory made solid PVC door frame of size 50x47 mm made out of 5 mm thick plain colour PVC sheet reinforced with M.S. Square tube 19mm x 19 mm of gauge complete all as specified and as directed. Make : Rajshree
S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M. S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site complete all as directed. Make : Rajshree or equivalent
S&F in repairs Urinal sensor, solonet Valve, Battery box along with batteries complete all as directed. Make:- Hindware or equivalent
S&F in repairs WHB sensor, solonet Valve, Battery box along with batteries complete all as directed. Make:- Jaquar or equivalent
Demolition of brick work built in cement mortar in any description and position complete all as specified and directed.
NOTE FOR CONTRACTOR APPLICABLE TO ALL BOQ ITEMS NO 01 TO ITEM NO 125 :- (a) Contractor's supervisor will collect complaints slip from AGE B/R Secundrabad office for daily bases at 9.00 AM and feedback should be provide same working day at 05.00 PM. along with details of complaints done / not done, reason for not done, material used and User/Occupant signature on complaints slip without fail. If the contractor or his representative fail to collect the complaints from the complaint cell on daily basis, a penal recovery of Rs.2500/day/complaint shall be recovered from the RAR/bill due to contractor. (b) The quoted rate included material, Labour, T&P and the demolished / old items should be deposit store / disposal from the site etc, as per direction of Engr-in-Charge. No extra will be paid. (c) Plumber complaints should be complete same day, Joinery and Masonry complaints should be complete with in 48 hrs without fail.
M.R.ENTERPRISES
Sai construction & services
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .