Work against sanctioned package

Amount

fo|qr uxjh; forj.k [k.M&izFke xksj[kiqj ds vUrxZr tek ;kstuk esa Lohd`r iSdst la[;k 44@2021&22 ¼tuin xksj[kiqj ds vfXu'keu dsUnz ds vkoklh;@vukoklh; Hkouksa ds la;kstu gsrq ckg; fo|qrhdj.k dk dk;Z½ ,oa 52@2022&23 ¼uxj fuxe] xksj[kiqj dh uo fufeZr Hkou gsrq ykbu fuekZ.k dk dk;Z½ ds dk;ksZ dks lseh VuZdh ds vk/kkj ij djk;s tkus gsrq dk;Z dk fooj.k %&

Loading, unloading and safe carriage of following materials from Store Centre, Gorakhpur to JE dump Store and JE dump Store to work site with proper stacking :-

11/.4 KV 400 KVA TF

11/.4 KV 63 KVA TF

11 KV XLPE 3x70 sq mm

11 KV XLPE 3x185 sq mm

ST Pole 11 mtr long

11 KV Top Channel

11 KV Dropper angle

11 KV S/S Base angle

11 KV Disc insulator with fiting

11 KV Pin Insulator with pin (Polymeric)

ACSR weasel conductor

11 KV Fuse set

11 KV TPMO with Polymeric insulator

LT XLPE Cable A1. 3.5X70 sq mm

LT XLPE Cable A1. 1X400 sq mm

Earthing complete

Stay complete with 5 kg wire

Jointing kit for 11 KV XLPE 3x70 sq mm

Jointing kit for 11 KV XLPE 3x185 sq mm

11 KV PPMC (15/5 A)

11 KV Electronic TVM Meter

11 KV CT/PT Pole mounting unit 15/5 A

Supply of following material/fitting complete in all respect :-

Clamps for top Dropper angle etc. with nuts & bolts

G.I Pipe 4 inch dia

A1 Lugs 70 Sq mm

Nuts & Bolts of different sizes.

A1 Lugs 400 sq mm

Copper Z Clamp suitable for 11./.4 KV 400 KVA TF

The excavation of 2 No foundation pit of size 750mmX450mm and having depth of 1/6th of the full length of the pole. Fabrication & erection of double Pole with fixing of necessary clamps & accessories (Top Channel, Dropper Angle etc.) as per required. All required materials such as Holding clamp/STP clamp, Nuts & Bolts off size etc will be provided by the contractor. Grouting of Pole in cc 1:4:8 (Cement, sand & 40 mm brick ballast), Grouting will be done in the block of size 450x450 mm x depth upto ground level and backfilling of pits with mud completely and leveling etc (Material provided by Contractor). Making plinth around Pole height 300 mm above ground level with top 100 mm is kept tapered so that No rainwater gets accumulated on the top. All work will be done as per RESPO Norms & relevent IS Specification.

Painting of Pole by double coating Aluminum & Red oxide paint. Paint will be provided by contractor

Earthing of ST Pole by MS earthing Rod & 6 SWG earthing Wire as per RESPO Norms.

Erection and grouting of stay in CC ratio 1:4:8 of Cement, Sand and Stone Ballast including cost of grouting material with Nozelling and binding of stay wire (Complete work)

Laying, stringing, sagging, binding and jumpering of ACSR Weasel conductor for LT/HT Line with fixing of LT Clamps/other clamps, Shackle insulator and nuts&bolts off size as per required.

Laying and dressing of under ground 11 KV XLPE 3x70 sq mm by Horizontal drilling method as per RESPO norms. The Depth of horizontal drilling shall be between 2 to 3 meters or as per site required.

Laying and dressing of under ground 11 KV XLPE 3x185 sq mm by Horizontal drilling method as per RESPO norms. The Depth of horizontal drilling shall be between 2 to 3 meters or as per site required.

Construction of T/F plinth of size 2x2x1.2 M with the help of first class brick & 9" masonary in the ratio 1:4 cement & sand coarse. Filling the structure completely and plastering outer surface as per RESPO Norms. Top of the plinth covered with 4" RCC Slab of ratio 1:1.5:3 (Cement, sand & concrete) grouting with 2 No ISMC size 125X65X6 MM (confirming to IS 808:1989) of 2000 mm long for resting. All required materials will be provided by the contractor.

Grill fencing of 11/0.4 KV S/S shall be made of rectangular of size & height approx 2.5 meter as per site requirement with fabrication 50X50X5 mm angel the frame is also have 1 no. Horizontal runner of MS flat 40x5 welded in middle to support of grill, having a gate on road side must have provision of locking arrangement. The work is including painting of fencing as per norms. Work will be done as per RESPO specification.

Fabrication, errection, commissioning & Testing of 63 KVA T/F on Double Pole with all accessories including make its LT and HT connection. All necessary materials such as Holding clamp, Al.Lugs (Confirming to IS 8309), Z Clamp, Nuts & Bolts will be supplied by the Contractor.

Fabrication, errection, commissioning & Testing of 400 KVA T/F on plinth with all accessories including make its LT and HT connection. All necessary materials such as Holding clamp, Al.Lugs (Confirming to IS 8309), Z Clamp, Nuts & Bolts will be supplied by the Contractor.

Chemical earthing of Transformer (Body+Neutral) as per IS Code 3043 - 1987 specification (Materials will be provided by contractor)

Errection of 11 KV XLPE Cable 3X70/3X185 mm² Jointing Kit Indoor/Outdoor with complete work

Errection of TPMO and Fuse set

Erection of PPMC (15/5A) & 11 KV CT/PT Pole Mounting Unit with 11 KV TVM Meter

Earthing of PPMC

Earthing of CT/PT unit

fo|qr uxjh; forj.k [k.M&prqFkZ xksj[kiqj ds vUrxZr tek ;kstuk esa Lohd`r iSdst la[;k 54@2021&22 ¼esllZ lqij ekdsZfVax izk0fy0 okLrs Jh ftrsUnz pkS/kjh] c'kkjriqj] xksj[kiqj gsrq 422 fd0ok0 ds ,p0Vh0 ehVfjax dk dk;Z½] 55@2021&22 ¼Jh larks"k dqekj dq'kokgk iq= Jh Hktu izlkn] [ktkaph pkSd] xksj[kiqj }kjk vkosfnr 38 fd0ok0 ds fo|qrhdj.k dk dk;Z½ ,oa 51@2022&23 ¼fudV [ktkaph pkSjkgk] esfMdy jksM] xksj[kiqj esa VSªfQd flXuy lapkyu gsrq ykbu fuekZ.k@la;kstu dk dk;Z½ ds dk;ksZ dks lseh VuZdh ds vk/kkj ij djk;s tkus gsrq dk;Z dk fooj.k %&

Loading, unloading and safe carriage of following materials from Store Centre, Gorakhpur to JE dump Store and JE dump Store to work site with proper stacking :-

11 KV XLPE 3x70 sq mm

11/.4 KV 63 KVA TF

ST Pole 11 mtr long

11 KV Top Channel

11 KV Dropper angle

11 KV Disc insulator with fitting

11 KV Sub-Station Base angle

11 KV T-off channel

11 KV Pin Insulator with pin

ACSR weasel conductor

ACSR Dog Conductor

Earthing complete

Cable Jointing kit Outdoor(3x70 mm2 XLPE 11KV)

11 KV Fuse set

11 KV TPMO

LT PVC Cable 3.5x70 SQ mm

Stay complete

11 KV PPMC (50/5 A)

11 KV Electronic TVM Meter

11 KV CT/PT Metering Pole Mounting Unit 50/5A (Provided By UPPCL)

Supply of following material/fitting complete in all respect :-

Holding Clamp for top Dropper Fuse set TPMO etc. with Nuts & Bolts

Alluminum Lugs 63 KVA Transformer

Nuts & Bolts

Z-Clamp

LT Calmp for ST Pole with Nuts Bolts

LT Shackle Insulator

The excavation of 2 No foundation pit of size 750mmX450mm and having depth of 1/6th of the full length of the pole. Fabrication & erection of double Pole with fixing of necessary clamps & accessories (Top Channel, Dropper Angle etc.) as per required. All required materials such as Holding clamp/STP clamp, Nuts & Bolts off size etc will be provided by the contractor. Grouting of Pole in cc 1:4:8 (Cement, sand & 40 mm brick ballast), Grouting will be done in the block of size 450x450 mm x depth upto ground level and backfilling of pits with mud completely and leveling etc (Material provided by Contractor). Making plinth around Pole height 300 mm above ground level with top 100 mm is kept tapered so that No rainwater gets accumulated on the top. All work will be done as per RESPO Norms & relevent IS Specification.

Laying, stringing, sagging, binding and jumpering of ACSR Dog/Weasel conductor for LT/HT Line with fixing of LT Clamps/other clamps, Shackle insulator and nuts&bolts off size as per required.

Laying and dressing of under ground 11 KV XLPE 3x70 sq mm by Horizontal drilling method as per RESPO norms. The Depth of horizontal drilling shall be between 2 to 3 meters or as per site required.

Errection of 11 KV XLPE Cable 3X70 mm² Jointing Kit Indoor/Outdoor with complete work

Erection and grouting of stay in CC ratio 1:4:8 of Cement, Sand and Stone Ballast including cost of grouting material with Nozelling and binding of stay wire (Complete work)

Fabrication, errection, commissioning & Testing of 63 KVA T/F on Double Pole with all accessories including make its LT and HT connection. All necessary materials such as Holding clamp, Al.Lugs (Confirming to IS 8309), Z Clamp, Nuts & Bolts will be supplied by the Contractor.

Chemical earthing of Transformer (Body+Neutral) as per IS Code 3043 - 1987 specification (Materials will be provided by contractor)

Painting of Pole by double coating Aluminium & Red oxide paint. Paint will be provided by contractor

Earthing of ST Pole by MS earthing Rod & 6 SWG earthing Wire as per RESPO norms.

Errection of TPMO and Fuse set

Erection of PPMC (50/5A) & 11 KV CT/PT Pole Mounting Unit with 11 KV TVM Meter

Earthing of PPMC

Earthing of CT/PT unit

Manish Traders

M/S JAI AMBE TRADERS