PROVN OF DEFI OTM ACCN AT MATHURA

3 4 5 Supply, installations, testing and commissioning factory made out door cubical type LT panel board dust and vermin proof , free standing, floor mounting type mounted on and incluidng 1:3:6 PCC foundation as requried at site and of fabricated by 3.0 mm thick SS sheet over MS 40 X 40 x 6 mm thick angle iron frame of requried type for support with double door both sides open type with necessary locking arrangement with slopped roof on top duly painted with two coats of powder coated semense gray paint complete and having separate doors inside for accomodating all incomming / out going feeders of suitable sizes all as specified and directed (For OR Living, FPO Bldg, Edu Bldg and other bldg) :- (a) MCCB 4 Pole 100 amps ,415 Volt of breaking capacity not less than 25 KA (Ics=100 % of Icu) with adjustable thermal setting (Optium 2.0) - 01 No for incoming. (b) Copper Busbar 140 Amps duly sleev insulated for set of 3 phase, 4 wire system and branch connection of suitable size of outgoing current rating of MCCBs - 01 Set. Outgoings :- (c) MCCB 63 Amp 415 V 10 KA- 01 Nos,(d) MCCB 32 Amp 415 V 16 KA- 02 Nos Supply, installations, testing and commissioning factory made out door cubical type LT panel board dust and vermin proof , free standing, floor mounting type mounted on and incluidng 1:3:6 PCC foundation as requried at site and of fabricated by 3.0 mm thick SS sheet over MS 40 X 40 x 6 mm thick angle iron frame of requried type for support with double door both sides open type with necessary locking arrangement with slopped roof on top duly painted with two coats of powder coated semense gray paint complete and having separate doors inside for accomodating all incomming / out going feeders of suitable sizes all as specified and directed (For OR Living, FPO Bldg, Edu Bldg and other bldg) :- (a) MCCB 4 Pole 100 amps ,415 Volt of breaking capacity not less than 25 KA (Ics=100 % of Icu) with adjustable thermal setting (Optium 2.0) - 01 No for incoming. (b) Copper Busbar 140 Amps duly sleev insulated for set of 3 phase, 4 wire system and branch connection of suitable size of outgoing current rating of MCCBs - 01 Set. Outgoings :- (c) MCCB 63 Amp 415 V 10 KA- 01 Nos,(d) MCCB 32 Amp 415 V 16 KA- 02 Nos Supply, installations, testing and commissioning factory made out door cubical type LT panel board dust and vermin proof , free standing, floor mounting type mounted on and incluidng 1:3:6 PCC foundation as requried at site and of fabricated by 3.0 mm thick SS sheet over MS 40 X 40 x 6 mm thick angle iron frame of requried type for support with double door both sides open type with necessary locking arrangement with slopped roof on top duly painted with two coats of powder coated semense gray paint complete and having separate doors inside for accomodating all incomming / out going feeders of suitable sizes all as specified and directed (For OR Living, FPO Bldg, Edu Bldg and other bldg) :- (a) MCCB 4 Pole 100 amps ,415 Volt of breaking capacity not less than 25 KA (Ics=100 % of Icu) with adjustable thermal setting (Optium 2.0) - 01 No for incoming. (b) Copper Busbar 140 Amps duly sleev insulated for set of 3 phase, 4 wire system and branch connection of suitable size of outgoing current rating of MCCBs - 01 Set. Outgoings :- (c) MCCB 63 Amp 415 V 10 KA- 01 Nos,(d) MCCB 32 Amp 415 V 16 KA- 02 Nos 6 Supply, installations, testing and commissioning factory made out door cubical type LT panel board dust and vermin proof , free standing, floor mounting type mounted on and incluidng 1:3:6 PCC foundation as requried at site and of fabricated by 3.0 mm thick SS sheet over MS 40 X 40 x 6 mm thick angle iron frame of requried type for support with double door both sides open type with necessary locking arrangement with slopped roof on top duly painted with two coats of powder coated semense gray paint complete and having separate doors inside for accomodating all incomming / out going feeders of suitable sizes all as specified and directed (For OR Living, FPO Bldg, Edu Bldg and other bldg) :- (a) MCCB 4 Pole 100 amps ,415 Volt of breaking capacity not less than 25 KA (Ics=100 % of Icu) with adjustable thermal setting (Optium 2.0) - 01 No for incoming. (b) Copper Busbar 140 Amps duly sleev insulated for set of 3 phase, 4 wire system and branch connection of suitable size of outgoing current rating of MCCBs - 01 Set. Outgoings :- (c) MCCB 63 Amp 415 V 10 KA- 01 Nos,(d) MCCB 32 Amp 415 V 16 KA- 02 Nos Supply, installations, testing and commissioning factory made out door cubical type LT panel board dust and vermin proof , free standing, floor mounting type mounted on and incluidng 1:3:6 PCC foundation as requried at site and of fabricated by 3.0 mm thick SS sheet over MS 40 X 40 x 6 mm thick angle iron frame of requried type for support with double door both sides open type with necessary locking arrangement with slopped roof on top duly painted with two coats of powder coated semense gray paint complete and having separate doors inside for accomodating all incomming / out going feeders of suitable sizes all as specified and directed (For OR Living, FPO Bldg, Edu Bldg and other bldg) :- (a) MCCB 4 Pole 100 amps ,415 Volt of breaking capacity not less than 25 KA (Ics=100 % of Icu) with adjustable thermal setting (Optium 2.0) - 01 No for incoming. (b) Copper Busbar 140 Amps duly sleev insulated for set of 3 phase, 4 wire system and branch connection of suitable size of outgoing current rating of MCCBs - 01 Set. Outgoings :- (c) MCCB 63 Amp 415 V 10 KA- 01 Nos,(d) MCCB 32 Amp 415 V 16 KA- 02 Nos 6 Supply, installations, testing and commissioning factory made out door cubical type LT panel board dust and vermin proof , free standing, floor mounting type mounted on and incluidng 1:3:6 PCC foundation as requried at site and of fabricated by 3.0 mm thick SS sheet over MS 40 X 40 x 6 mm thick angle iron frame of requried type for support with double door both sides open type with necessary locking arrangement with slopped roof on top duly painted with two coats of powder coated semense gray paint complete and having separate doors inside for accomodating all incomming / out going feeders of suitable sizes all as specified and directed (For OR Living, FPO Bldg, Edu Bldg and other bldg) :- (a) MCCB 4 Pole 100 amps ,415 Volt of breaking capacity not less than 25 KA (Ics=100 % of Icu) with adjustable thermal setting (Optium 2.0) - 01 No for incoming. (b) Copper Busbar 140 Amps duly sleev insulated for set of 3 phase, 4 wire system and branch connection of suitable size of outgoing current rating of MCCBs - 01 Set. Outgoings :- (c) MCCB 63 Amp 415 V 10 KA- 01 Nos,(d) MCCB 32 Amp 415 V 16 KA- 02 Nos Supply, installations, testing and commissioning factory made out door cubical type LT panel board dust and vermin proof , free standing, floor mounting type mounted on and incluidng 1:3:6 PCC foundation as requried at site and of fabricated by 3.0 mm thick SS sheet over MS 40 X 40 x 6 mm thick angle iron frame of requried type for support with double door both sides open type with necessary locking arrangement with slopped roof on top duly painted with two coats of powder coated semense gray paint complete and having separate doors inside for accomodating all incomming / out going feeders of suitable sizes all as specified and directed (For OR Living, FPO Bldg, Edu Bldg and other bldg) :- (a) MCCB 4 Pole 100 amps ,415 Volt of breaking capacity not less than 25 KA (Ics=100 % of Icu) with adjustable thermal setting (Optium 2.0) - 01 No for incoming. (b) Copper Busbar 140 Amps duly sleev insulated for set of 3 phase, 4 wire system and branch connection of suitable size of outgoing current rating of MCCBs - 01 Set. Outgoings :- (c) MCCB 63 Amp 415 V 10 KA- 01 Nos,(d) MCCB 32 Amp 415 V 16 KA- 02 Nos Supply, installations, testing and commissioning factory made out door cubical type LT panel board dust and vermin proof , free standing, floor mounting type mounted on and incluidng 1:3:6 PCC foundation as requried at site and of fabricated by 3.0 mm thick SS sheet over MS 40 X 40 x 6 mm thick angle iron frame of requried type for support with double door both sides open type with necessary locking arrangement with slopped roof on top duly painted with two coats of powder coated semense gray paint complete and having separate doors inside for accomodating all incomming / out going feeders of suitable sizes all as specified and directed (For OR Living, FPO Bldg, Edu Bldg and other bldg) :- (a) MCCB 4 Pole 100 amps ,415 Volt of breaking capacity not less than 25 KA (Ics=100 % of Icu) with adjustable thermal setting (Optium 2.0) - 01 No for incoming. (b) Copper Busbar 140 Amps duly sleev insulated for set of 3 phase, 4 wire system and branch connection of suitable size of outgoing current rating of MCCBs - 01 Set. Outgoings :- (c) MCCB 63 Amp 415 V 10 KA- 01 Nos,(d) MCCB 32 Amp 415 V 16 KA- 02 Nos Supply, installations, testing and commissioning factory made out door cubical type LT panel board dust and vermin proof , free standing, floor mounting type mounted on and incluidng 1:3:6 PCC foundation as requried at site and of fabricated by 3.0 mm thick SS sheet over MS 40 X 40 x 6 mm thick angle iron frame of requried type for support with double door both sides open type with necessary locking arrangement with slopped roof on top duly painted with two coats of powder coated semense gray paint complete and having separate doors inside for accomodating all incomming / out going feeders of suitable sizes all as specified and directed (For OR Living, FPO Bldg, Edu Bldg and other bldg) :- (a) MCCB 4 Pole 100 amps ,415 Volt of breaking capacity not less than 25 KA (Ics=100 % of Icu) with adjustable thermal setting (Optium 2.0) - 01 No for incoming. (b) Copper Busbar 140 Amps duly sleev insulated for set of 3 phase, 4 wire system and branch connection of suitable size of outgoing current rating of MCCBs - 01 Set. Outgoings :- (c) MCCB 63 Amp 415 V 10 KA- 01 Nos,(d) MCCB 32 Amp 415 V 16 KA- 02 Nos Supply, installations, testing and commissioning factory made out door cubical type LT panel board dust and vermin proof , free standing, floor mounting type mounted on and incluidng 1:3:6 PCC foundation as requried at site and of fabricated by 3.0 mm thick SS sheet over MS 40 X 40 x 6 mm thick angle iron frame of requried type for support with double door both sides open type with necessary locking arrangement with slopped roof on top duly painted with two coats of powder coated semense gray paint complete and having separate doors inside for accomodating all incomming / out going feeders of suitable sizes all as specified and directed (For OR Living, FPO Bldg, Edu Bldg and other bldg) :- (a) MCCB 4 Pole 100 amps ,415 Volt of breaking capacity not less than 25 KA (Ics=100 % of Icu) with adjustable thermal setting (Optium 2.0) - 01 No for incoming. (b) Copper Busbar 140 Amps duly sleev insulated for set of 3 phase, 4 wire system and branch connection of suitable size of outgoing current rating of MCCBs - 01 Set. Outgoings :- (c) MCCB 63 Amp 415 V 10 KA- 01 Nos,(d) MCCB 32 Amp 415 V 16 KA- 02 Nos Supply, installations, testing and commissioning factory made out door cubical type LT panel board dust and vermin proof , free standing, floor mounting type mounted on and incluidng 1:3:6 PCC foundation as requried at site and of fabricated by 3.0 mm thick SS sheet over MS 40 X 40 x 6 mm thick angle iron frame of requried type for support with double door both sides open type with necessary locking arrangement with slopped roof on top duly painted with two coats of powder coated semense gray paint complete and having separate doors inside for accomodating all incomming / out going feeders of suitable sizes all as specified and directed (For OR Living, FPO Bldg, Edu Bldg and other bldg) :- (a) MCCB 4 Pole 100 amps ,415 Volt of breaking capacity not less than 25 KA (Ics=100 % of Icu) with adjustable thermal setting (Optium 2.0) - 01 No for incoming. (b) Copper Busbar 140 Amps duly sleev insulated for set of 3 phase, 4 wire system and branch connection of suitable size of outgoing current rating of MCCBs - 01 Set. Outgoings :- (c) MCCB 63 Amp 415 V 10 KA- 01 Nos,(d) MCCB 32 Amp 415 V 16 KA- 02 Nos Supply, installations, testing and commissioning factory made out door cubical type LT panel board dust and vermin proof , free standing, floor mounting type mounted on and incluidng 1:3:6 PCC foundation as requried at site and of fabricated by 3.0 mm thick SS sheet over MS 40 X 40 x 6 mm thick angle iron frame of requried type for support with double door both sides open type with necessary locking arrangement with slopped roof on top duly painted with two coats of powder coated semense gray paint complete and having separate doors inside for accomodating all incomming / out going feeders of suitable sizes all as specified and directed (For OR Living, FPO Bldg, Edu Bldg and other bldg) :- (a) MCCB 4 Pole 100 amps ,415 Volt of breaking capacity not less than 25 KA (Ics=100 % of Icu) with adjustable thermal setting (Optium 2.0) - 01 No for incoming. (b) Copper Busbar 140 Amps duly sleev insulated for set of 3 phase, 4 wire system and branch connection of suitable size of outgoing current rating of MCCBs - 01 Set. Outgoings :- (c) MCCB 63 Amp 415 V 10 KA- 01 Nos,(d) MCCB 32 Amp 415 V 16 KA- 02 Nos Supply, installations, testing and commissioning factory made out door cubical type LT panel board dust and vermin proof , free standing, floor mounting type mounted on and incluidng 1:3:6 PCC foundation as requried at site and of fabricated by 3.0 mm thick SS sheet over MS 40 X 40 x 6 mm thick angle iron frame of requried type for support with double door both sides open type with necessary locking arrangement with slopped roof on top duly painted with two coats of powder coated semense gray paint complete and having separate doors inside for accomodating all incomming / out going feeders of suitable sizes all as specified and directed (For OR Living, FPO Bldg, Edu Bldg and other bldg) :- (a) MCCB 4 Pole 100 amps ,415 Volt of breaking capacity not less than 25 KA (Ics=100 % of Icu) with adjustable thermal setting (Optium 2.0) - 01 No for incoming. (b) Copper Busbar 140 Amps duly sleev insulated for set of 3 phase, 4 wire system and branch connection of suitable size of outgoing current rating of MCCBs - 01 Set. Outgoings :- (c) MCCB 63 Amp 415 V 10 KA- 01 Nos,(d) MCCB 32 Amp 415 V 16 KA- 02 Nos Supply, installations, testing and commissioning factory made out door cubical type LT panel board dust and vermin proof , free standing, floor mounting type mounted on and incluidng 1:3:6 PCC foundation as requried at site and of fabricated by 3.0 mm thick SS sheet over MS 40 X 40 x 6 mm thick angle iron frame of requried type for support with double door both sides open type with necessary locking arrangement with slopped roof on top duly painted with two coats of powder coated semense gray paint complete and having separate doors inside for accomodating all incomming / out going feeders of suitable sizes all as specified and directed (For OR Living, FPO Bldg, Edu Bldg and other bldg) :- (a) MCCB 4 Pole 100 amps ,415 Volt of breaking capacity not less than 25 KA (Ics=100 % of Icu) with adjustable thermal setting (Optium 2.0) - 01 No for incoming. (b) Copper Busbar 140 Amps duly sleev insulated for set of 3 phase, 4 wire system and branch connection of suitable size of outgoing current rating of MCCBs - 01 Set. Outgoings :- (c) MCCB 63 Amp 415 V 10 KA- 01 Nos,(d) MCCB 32 Amp 415 V 16 KA- 02 Nos Supply, installations, testing and commissioning factory made out door cubical type LT panel board dust and vermin proof , free standing, floor mounting type mounted on and incluidng 1:3:6 PCC foundation as requried at site and of fabricated by 3.0 mm thick SS sheet over MS 40 X 40 x 6 mm thick angle iron frame of requried type for support with double door both sides open type with necessary locking arrangement with slopped roof on top duly painted with two coats of powder coated semense gray paint complete and having separate doors inside for accomodating all incomming / out going feeders of suitable sizes all as specified and directed (For OR Living, FPO Bldg, Edu Bldg and other bldg) :- (a) MCCB 4 Pole 100 amps ,415 Volt of breaking capacity not less than 25 KA (Ics=100 % of Icu) with adjustable thermal setting (Optium 2.0) - 01 No for incoming. (b) Copper Busbar 140 Amps duly sleev insulated for set of 3 phase, 4 wire system and branch connection of suitable size of outgoing current rating of MCCBs - 01 Set. Outgoings :- (c) MCCB 63 Amp 415 V 10 KA- 01 Nos,(d) MCCB 32 Amp 415 V 16 KA- 02 Nos Supply, installations, testing and commissioning factory made out door cubical type LT panel board dust and vermin proof , free standing, floor mounting type mounted on and incluidng 1:3:6 PCC foundation as requried at site and of fabricated by 3.0 mm thick SS sheet over MS 40 X 40 x 6 mm thick angle iron frame of requried type for support with double door both sides open type with necessary locking arrangement with slopped roof on top duly painted with two coats of powder coated semense gray paint complete and having separate doors inside for accomodating all incomming / out going feeders of suitable sizes all as specified and directed (For OR Living, FPO Bldg, Edu Bldg and other bldg) :- (a) MCCB 4 Pole 100 amps ,415 Volt of breaking capacity not less than 25 KA (Ics=100 % of Icu) with adjustable thermal setting (Optium 2.0) - 01 No for incoming. (b) Copper Busbar 140 Amps duly sleev insulated for set of 3 phase, 4 wire system and branch connection of suitable size of outgoing current rating of MCCBs - 01 Set. Outgoings :- (c) MCCB 63 Amp 415 V 10 KA- 01 Nos,(d) MCCB 32 Amp 415 V 16 KA- 02 Nos Supply, installations, testing and commissioning factory made out door cubical type LT panel board dust and vermin proof , free standing, floor mounting type mounted on and incluidng 1:3:6 PCC foundation as requried at site and of fabricated by 3.0 mm thick SS sheet over MS 40 X 40 x 6 mm thick angle iron frame of requried type for support with double door both sides open type with necessary locking arrangement with slopped roof on top duly painted with two coats of powder coated semense gray paint complete and having separate doors inside for accomodating all incomming / out going feeders of suitable sizes all as specified and directed (For OR Living, FPO Bldg, Edu Bldg and other bldg) :- (a) MCCB 4 Pole 100 amps ,415 Volt of breaking capacity not less than 25 KA (Ics=100 % of Icu) with adjustable thermal setting (Optium 2.0) - 01 No for incoming. (b) Copper Busbar 140 Amps duly sleev insulated for set of 3 phase, 4 wire system and branch connection of suitable size of outgoing current rating of MCCBs - 01 Set. Outgoings :- (c) MCCB 63 Amp 415 V 10 KA- 01 Nos,(d) MCCB 32 Amp 415 V 16 KA- 02 Nos Supply, installations, testing and commissioning factory made out door cubical type LT panel board dust and vermin proof , free standing, floor mounting type mounted on and incluidng 1:3:6 PCC foundation as requried at site and of fabricated by 3.0 mm thick SS sheet over MS 40 X 40 x 6 mm thick angle iron frame of requried type for support with double door both sides open type with necessary locking arrangement with slopped roof on top duly painted with two coats of powder coated semense gray paint complete and having separate doors inside for accomodating all incomming / out going feeders of suitable sizes all as specified and directed (For OR Living, FPO Bldg, Edu Bldg and other bldg) :- (a) MCCB 4 Pole 100 amps ,415 Volt of breaking capacity not less than 25 KA (Ics=100 % of Icu) with adjustable thermal setting (Optium 2.0) - 01 No for incoming. (b) Copper Busbar 140 Amps duly sleev insulated for set of 3 phase, 4 wire system and branch connection of suitable size of outgoing current rating of MCCBs - 01 Set. Outgoings :- (c) MCCB 63 Amp 415 V 10 KA- 01 Nos,(d) MCCB 32 Amp 415 V 16 KA- 02 Nos Supply, installations, testing and commissioning factory made out door cubical type LT panel board dust and vermin proof , free standing, floor mounting type mounted on and incluidng 1:3:6 PCC foundation as requried at site and of fabricated by 3.0 mm thick SS sheet over MS 40 X 40 x 6 mm thick angle iron frame of requried type for support with double door both sides open type with necessary locking arrangement with slopped roof on top duly painted with two coats of powder coated semense gray paint complete and having separate doors inside for accomodating all incomming / out going feeders of suitable sizes all as specified and directed (For OR Living, FPO Bldg, Edu Bldg and other bldg) :- (a) MCCB 4 Pole 100 amps ,415 Volt of breaking capacity not less than 25 KA (Ics=100 % of Icu) with adjustable thermal setting (Optium 2.0) - 01 No for incoming. (b) Copper Busbar 140 Amps duly sleev insulated for set of 3 phase, 4 wire system and branch connection of suitable size of outgoing current rating of MCCBs - 01 Set. Outgoings :- (c) MCCB 63 Amp 415 V 10 KA- 01 Nos,(d) MCCB 32 Amp 415 V 16 KA- 02 Nos Supply, installations, testing and commissioning factory made out door cubical type LT panel board dust and vermin proof , free standing, floor mounting type mounted on and incluidng 1:3:6 PCC foundation as requried at site and of fabricated by 3.0 mm thick SS sheet over MS 40 X 40 x 6 mm thick angle iron frame of requried type for support with double door both sides open type with necessary locking arrangement with slopped roof on top duly painted with two coats of powder coated semense gray paint complete and having separate doors inside for accomodating all incomming / out going feeders of suitable sizes all as specified and directed (For OR Living, FPO Bldg, Edu Bldg and other bldg) :- (a) MCCB 4 Pole 100 amps ,415 Volt of breaking capacity not less than 25 KA (Ics=100 % of Icu) with adjustable thermal setting (Optium 2.0) - 01 No for incoming. (b) Copper Busbar 140 Amps duly sleev insulated for set of 3 phase, 4 wire system and branch connection of suitable size of outgoing current rating of MCCBs - 01 Set. Outgoings :- (c) MCCB 63 Amp 415 V 10 KA- 01 Nos,(d) MCCB 32 Amp 415 V 16 KA- 02 Nos Supply, installations, testing and commissioning factory made out door cubical type LT panel board dust and vermin proof , free standing, floor mounting type mounted on and incluidng 1:3:6 PCC foundation as requried at site and of fabricated by 3.0 mm thick SS sheet over MS 40 X 40 x 6 mm thick angle iron frame of requried type for support with double door both sides open type with necessary locking arrangement with slopped roof on top duly painted with two coats of powder coated semense gray paint complete and having separate doors inside for accomodating all incomming / out going feeders of suitable sizes all as specified and directed (For OR Living, FPO Bldg, Edu Bldg and other bldg) :- (a) MCCB 4 Pole 100 amps ,415 Volt of breaking capacity not less than 25 KA (Ics=100 % of Icu) with adjustable thermal setting (Optium 2.0) - 01 No for incoming. (b) Copper Busbar 140 Amps duly sleev insulated for set of 3 phase, 4 wire system and branch connection of suitable size of outgoing current rating of MCCBs - 01 Set. Outgoings :- (c) MCCB 63 Amp 415 V 10 KA- 01 Nos,(d) MCCB 32 Amp 415 V 16 KA- 02 Nos Supply, installations, testing and commissioning factory made out door cubical type LT panel board dust and vermin proof , free standing, floor mounting type mounted on and incluidng 1:3:6 PCC foundation as requried at site and of fabricated by 3.0 mm thick SS sheet over MS 40 X 40 x 6 mm thick angle iron frame of requried type for support with double door both sides open type with necessary locking arrangement with slopped roof on top duly painted with two coats of powder coated semense gray paint complete and having separate doors inside for accomodating all incomming / out going feeders of suitable sizes all as specified and directed (For OR Living, FPO Bldg, Edu Bldg and other bldg) :- (a) MCCB 4 Pole 100 amps ,415 Volt of breaking capacity not less than 25 KA (Ics=100 % of Icu) with adjustable thermal setting (Optium 2.0) - 01 No for incoming. (b) Copper Busbar 140 Amps duly sleev insulated for set of 3 phase, 4 wire system and branch connection of suitable size of outgoing current rating of MCCBs - 01 Set. Outgoings :- (c) MCCB 63 Amp 415 V 10 KA- 01 Nos,(d) MCCB 32 Amp 415 V 16 KA- 02 Nos Supply, installations, testing and commissioning factory made out door cubical type LT panel board dust and vermin proof , free standing, floor mounting type mounted on and incluidng 1:3:6 PCC foundation as requried at site and of fabricated by 3.0 mm thick SS sheet over MS 40 X 40 x 6 mm thick angle iron frame of requried type for support with double door both sides open type with necessary locking arrangement with slopped roof on top duly painted with two coats of powder coated semense gray paint complete and having separate doors inside for accomodating all incomming / out going feeders of suitable sizes all as specified and directed (For OR Living, FPO Bldg, Edu Bldg and other bldg) :- (a) MCCB 4 Pole 100 amps ,415 Volt of breaking capacity not less than 25 KA (Ics=100 % of Icu) with adjustable thermal setting (Optium 2.0) - 01 No for incoming. (b) Copper Busbar 140 Amps duly sleev insulated for set of 3 phase, 4 wire system and branch connection of suitable size of outgoing current rating of MCCBs - 01 Set. Outgoings :- (c) MCCB 63 Amp 415 V 10 KA- 01 Nos,(d) MCCB 32 Amp 415 V 16 KA- 02 Nos Supply, installations, testing and commissioning factory made out door cubical type LT panel board dust and vermin proof , free standing, floor mounting type mounted on and incluidng 1:3:6 PCC foundation as requried at site and of fabricated by 3.0 mm thick SS sheet over MS 40 X 40 x 6 mm thick angle iron frame of requried type for support with double door both sides open type with necessary locking arrangement with slopped roof on top duly painted with two coats of powder coated semense gray paint complete and having separate doors inside for accomodating all incomming / out going feeders of suitable sizes all as specified and directed (For OR Living, FPO Bldg, Edu Bldg and other bldg) :- (a) MCCB 4 Pole 100 amps ,415 Volt of breaking capacity not less than 25 KA (Ics=100 % of Icu) with adjustable thermal setting (Optium 2.0) - 01 No for incoming. (b) Copper Busbar 140 Amps duly sleev insulated for set of 3 phase, 4 wire system and branch connection of suitable size of outgoing current rating of MCCBs - 01 Set. Outgoings :- (c) MCCB 63 Amp 415 V 10 KA- 01 Nos,(d) MCCB 32 Amp 415 V 16 KA- 02 Nos Supply, installations, testing and commissioning factory made out door cubical type LT panel board dust and vermin proof , free standing, floor mounting type mounted on and incluidng 1:3:6 PCC foundation as requried at site and of fabricated by 3.0 mm thick SS sheet over MS 40 X 40 x 6 mm thick angle iron frame of requried type for support with double door both sides open type with necessary locking arrangement with slopped roof on top duly painted with two coats of powder coated semense gray paint complete and having separate doors inside for accomodating all incomming / out going feeders of suitable sizes all as specified and directed (For OR Living, FPO Bldg, Edu Bldg and other bldg) :- (a) MCCB 4 Pole 100 amps ,415 Volt of breaking capacity not less than 25 KA (Ics=100 % of Icu) with adjustable thermal setting (Optium 2.0) - 01 No for incoming. (b) Copper Busbar 140 Amps duly sleev insulated for set of 3 phase, 4 wire system and branch connection of suitable size of outgoing current rating of MCCBs - 01 Set. Outgoings :- (c) MCCB 63 Amp 415 V 10 KA- 01 Nos,(d) MCCB 32 Amp 415 V 16 KA- 02 Nos Supply, installations, testing and commissioning factory made out door cubical type LT panel board dust and vermin proof , free standing, floor mounting type mounted on and incluidng 1:3:6 PCC foundation as requried at site and of fabricated by 3.0 mm thick SS sheet over MS 40 X 40 x 6 mm thick angle iron frame of requried type for support with double door both sides open type with necessary locking arrangement with slopped roof on top duly painted with two coats of powder coated semense gray paint complete and having separate doors inside for accomodating all incomming / out going feeders of suitable sizes all as specified and directed (For OR Living, FPO Bldg, Edu Bldg and other bldg) :- (a) MCCB 4 Pole 100 amps ,415 Volt of breaking capacity not less than 25 KA (Ics=100 % of Icu) with adjustable thermal setting (Optium 2.0) - 01 No for incoming. (b) Copper Busbar 140 Amps duly sleev insulated for set of 3 phase, 4 wire system and branch connection of suitable size of outgoing current rating of MCCBs - 01 Set. Outgoings :- (c) MCCB 63 Amp 415 V 10 KA- 01 Nos,(d) MCCB 32 Amp 415 V 16 KA- 02 Nos Supply, installations, testing and commissioning factory made out door cubical type LT panel board dust and vermin proof , free standing, floor mounting type mounted on and incluidng 1:3:6 PCC foundation as requried at site and of fabricated by 3.0 mm thick SS sheet over MS 40 X 40 x 6 mm thick angle iron frame of requried type for support with double door both sides open type with necessary locking arrangement with slopped roof on top duly painted with two coats of powder coated semense gray paint complete and having separate doors inside for accomodating all incomming / out going feeders of suitable sizes all as specified and directed (For OR Living, FPO Bldg, Edu Bldg and other bldg) :- (a) MCCB 4 Pole 100 amps ,415 Volt of breaking capacity not less than 25 KA (Ics=100 % of Icu) with adjustable thermal setting (Optium 2.0) - 01 No for incoming. (b) Copper Busbar 140 Amps duly sleev insulated for set of 3 phase, 4 wire system and branch connection of suitable size of outgoing current rating of MCCBs - 01 Set. Outgoings :- (c) MCCB 63 Amp 415 V 10 KA- 01 Nos,(d) MCCB 32 Amp 415 V 16 KA- 02 Nos Supply, installations, testing and commissioning factory made out door cubical type LT panel board dust and vermin proof , free standing, floor mounting type mounted on and incluidng 1:3:6 PCC foundation as requried at site and of fabricated by 3.0 mm thick SS sheet over MS 40 X 40 x 6 mm thick angle iron frame of requried type for support with double door both sides open type with necessary locking arrangement with slopped roof on top duly painted with two coats of powder coated semense gray paint complete and having separate doors inside for accomodating all incomming / out going feeders of suitable sizes all as specified and directed (For OR Living, FPO Bldg, Edu Bldg and other bldg) :- (a) MCCB 4 Pole 100 amps ,415 Volt of breaking capacity not less than 25 KA (Ics=100 % of Icu) with adjustable thermal setting (Optium 2.0) - 01 No for incoming. (b) Copper Busbar 140 Amps duly sleev insulated for set of 3 phase, 4 wire system and branch connection of suitable size of outgoing current rating of MCCBs - 01 Set. Outgoings :- (c) MCCB 63 Amp 415 V 10 KA- 01 Nos,(d) MCCB 32 Amp 415 V 16 KA- 02 Nos Supply, installations, testing and commissioning factory made out door cubical type LT panel board dust and vermin proof , free standing, floor mounting type mounted on and incluidng 1:3:6 PCC foundation as requried at site and of fabricated by 3.0 mm thick SS sheet over MS 40 X 40 x 6 mm thick angle iron frame of requried type for support with double door both sides open type with necessary locking arrangement with slopped roof on top duly painted with two coats of powder coated semense gray paint complete and having separate doors inside for accomodating all incomming / out going feeders of suitable sizes all as specified and directed (For OR Living, FPO Bldg, Edu Bldg and other bldg) :- (a) MCCB 4 Pole 100 amps ,415 Volt of breaking capacity not less than 25 KA (Ics=100 % of Icu) with adjustable thermal setting (Optium 2.0) - 01 No for incoming. (b) Copper Busbar 140 Amps duly sleev insulated for set of 3 phase, 4 wire system and branch connection of suitable size of outgoing current rating of MCCBs - 01 Set. Outgoings :- (c) MCCB 63 Amp 415 V 10 KA- 01 Nos,(d) MCCB 32 Amp 415 V 16 KA- 02 Nos Supply, installations, testing and commissioning factory made out door cubical type LT panel board dust and vermin proof , free standing, floor mounting type mounted on and incluidng 1:3:6 PCC foundation as requried at site and of fabricated by 3.0 mm thick SS sheet over MS 40 X 40 x 6 mm thick angle iron frame of requried type for support with double door both sides open type with necessary locking arrangement with slopped roof on top duly painted with two coats of powder coated semense gray paint complete and having separate doors inside for accomodating all incomming / out going feeders of suitable sizes all as specified and directed (For OR Living, FPO Bldg, Edu Bldg and other bldg) :- (a) MCCB 4 Pole 100 amps ,415 Volt of breaking capacity not less than 25 KA (Ics=100 % of Icu) with adjustable thermal setting (Optium 2.0) - 01 No for incoming. (b) Copper Busbar 140 Amps duly sleev insulated for set of 3 phase, 4 wire system and branch connection of suitable size of outgoing current rating of MCCBs - 01 Set. Outgoings :- (c) MCCB 63 Amp 415 V 10 KA- 01 Nos,(d) MCCB 32 Amp 415 V 16 KA- 02 Nos Supply, installations, testing and commissioning factory made out door cubical type LT panel board dust and vermin proof , free standing, floor mounting type mounted on and incluidng 1:3:6 PCC foundation as requried at site and of fabricated by 3.0 mm thick SS sheet over MS 40 X 40 x 6 mm thick angle iron frame of requried type for support with double door both sides open type with necessary locking arrangement with slopped roof on top duly painted with two coats of powder coated semense gray paint complete and having separate doors inside for accomodating all incomming / out going feeders of suitable sizes all as specified and directed (For OR Living, FPO Bldg, Edu Bldg and other bldg) :- (a) MCCB 4 Pole 100 amps ,415 Volt of breaking capacity not less than 25 KA (Ics=100 % of Icu) with adjustable thermal setting (Optium 2.0) - 01 No for incoming. (b) Copper Busbar 140 Amps duly sleev insulated for set of 3 phase, 4 wire system and branch connection of suitable size of outgoing current rating of MCCBs - 01 Set. Outgoings :- (c) MCCB 63 Amp 415 V 10 KA- 01 Nos,(d) MCCB 32 Amp 415 V 16 KA- 02 Nos Supply, installations, testing and commissioning factory made out door cubical type LT panel board dust and vermin proof , free standing, floor mounting type mounted on and incluidng 1:3:6 PCC foundation as requried at site and of fabricated by 3.0 mm thick SS sheet over MS 40 X 40 x 6 mm thick angle iron frame of requried type for support with double door both sides open type with necessary locking arrangement with slopped roof on top duly painted with two coats of powder coated semense gray paint complete and having separate doors inside for accomodating all incomming / out going feeders of suitable sizes all as specified and directed (For OR Living, FPO Bldg, Edu Bldg and other bldg) :- (a) MCCB 4 Pole 100 amps ,415 Volt of breaking capacity not less than 25 KA (Ics=100 % of Icu) with adjustable thermal setting (Optium 2.0) - 01 No for incoming. (b) Copper Busbar 140 Amps duly sleev insulated for set of 3 phase, 4 wire system and branch connection of suitable size of outgoing current rating of MCCBs - 01 Set. Outgoings :- (c) MCCB 63 Amp 415 V 10 KA- 01 Nos,(d) MCCB 32 Amp 415 V 16 KA- 02 Nos Supply, installations, testing and commissioning factory made out door cubical type LT panel board dust and vermin proof , free standing, floor mounting type mounted on and incluidng 1:3:6 PCC foundation as requried at site and of fabricated by 3.0 mm thick SS sheet over MS 40 X 40 x 6 mm thick angle iron frame of requried type for support with double door both sides open type with necessary locking arrangement with slopped roof on top duly painted with two coats of powder coated semense gray paint complete and having separate doors inside for accomodating all incomming / out going feeders of suitable sizes all as specified and directed (For OR Living, FPO Bldg, Edu Bldg and other bldg) :- (a) MCCB 4 Pole 100 amps ,415 Volt of breaking capacity not less than 25 KA (Ics=100 % of Icu) with adjustable thermal setting (Optium 2.0) - 01 No for incoming. (b) Copper Busbar 140 Amps duly sleev insulated for set of 3 phase, 4 wire system and branch connection of suitable size of outgoing current rating of MCCBs - 01 Set. Outgoings :- (c) MCCB 63 Amp 415 V 10 KA- 01 Nos,(d) MCCB 32 Amp 415 V 16 KA- 02 Nos Supply, installations, testing and commissioning factory made out door cubical type LT panel board dust and vermin proof , free standing, floor mounting type mounted on and incluidng 1:3:6 PCC foundation as requried at site and of fabricated by 3.0 mm thick SS sheet over MS 40 X 40 x 6 mm thick angle iron frame of requried type for support with double door both sides open type with necessary locking arrangement with slopped roof on top duly painted with two coats of powder coated semense gray paint complete and having separate doors inside for accomodating all incomming / out going feeders of suitable sizes all as specified and directed (For OR Living, FPO Bldg, Edu Bldg and other bldg) :- (a) MCCB 4 Pole 100 amps ,415 Volt of breaking capacity not less than 25 KA (Ics=100 % of Icu) with adjustable thermal setting (Optium 2.0) - 01 No for incoming. (b) Copper Busbar 140 Amps duly sleev insulated for set of 3 phase, 4 wire system and branch connection of suitable size of outgoing current rating of MCCBs - 01 Set. Outgoings :- (c) MCCB 63 Amp 415 V 10 KA- 01 Nos,(d) MCCB 32 Amp 415 V 16 KA- 02 Nos Supply, installations, testing and commissioning factory made out door cubical type LT panel board dust and vermin proof , free standing, floor mounting type mounted on and incluidng 1:3:6 PCC foundation as requried at site and of fabricated by 3.0 mm thick SS sheet over MS 40 X 40 x 6 mm thick angle iron frame of requried type for support with double door both sides open type with necessary locking arrangement with slopped roof on top duly painted with two coats of powder coated semense gray paint complete and having separate doors inside for accomodating all incomming / out going feeders of suitable sizes all as specified and directed (For OR Living, FPO Bldg, Edu Bldg and other bldg) :- (a) MCCB 4 Pole 100 amps ,415 Volt of breaking capacity not less than 25 KA (Ics=100 % of Icu) with adjustable thermal setting (Optium 2.0) - 01 No for incoming. (b) Copper Busbar 140 Amps duly sleev insulated for set of 3 phase, 4 wire system and branch connection of suitable size of outgoing current rating of MCCBs - 01 Set. Outgoings :- (c) MCCB 63 Amp 415 V 10 KA- 01 Nos,(d) MCCB 32 Amp 415 V 16 KA- 02 Nos Supply, installations, testing and commissioning factory made out door cubical type LT panel board dust and vermin proof , free standing, floor mounting type mounted on and incluidng 1:3:6 PCC foundation as requried at site and of fabricated by 3.0 mm thick SS sheet over MS 40 X 40 x 6 mm thick angle iron frame of requried type for support with double door both sides open type with necessary locking arrangement with slopped roof on top duly painted with two coats of powder coated semense gray paint complete and having separate doors inside for accomodating all incomming / out going feeders of suitable sizes all as specified and directed (For OR Living, FPO Bldg, Edu Bldg and other bldg) :- (a) MCCB 4 Pole 100 amps ,415 Volt of breaking capacity not less than 25 KA (Ics=100 % of Icu) with adjustable thermal setting (Optium 2.0) - 01 No for incoming. (b) Copper Busbar 140 Amps duly sleev insulated for set of 3 phase, 4 wire system and branch connection of suitable size of outgoing current rating of MCCBs - 01 Set. Outgoings :- (c) MCCB 63 Amp 415 V 10 KA- 01 Nos,(d) MCCB 32 Amp 415 V 16 KA- 02 Nos Supply, installations, testing and commissioning factory made out door cubical type LT panel board dust and vermin proof , free standing, floor mounting type mounted on and incluidng 1:3:6 PCC foundation as requried at site and of fabricated by 3.0 mm thick SS sheet over MS 40 X 40 x 6 mm thick angle iron frame of requried type for support with double door both sides open type with necessary locking arrangement with slopped roof on top duly painted with two coats of powder coated semense gray paint complete and having separate doors inside for accomodating all incomming / out going feeders of suitable sizes all as specified and directed (For OR Living, FPO Bldg, Edu Bldg and other bldg) :- (a) MCCB 4 Pole 100 amps ,415 Volt of breaking capacity not less than 25 KA (Ics=100 % of Icu) with adjustable thermal setting (Optium 2.0) - 01 No for incoming. (b) Copper Busbar 140 Amps duly sleev insulated for set of 3 phase, 4 wire system and branch connection of suitable size of outgoing current rating of MCCBs - 01 Set. Outgoings :- (c) MCCB 63 Amp 415 V 10 KA- 01 Nos,(d) MCCB 32 Amp 415 V 16 KA- 02 Nos Supply, installations, testing and commissioning factory made out door cubical type LT panel board dust and vermin proof , free standing, floor mounting type mounted on and incluidng 1:3:6 PCC foundation as requried at site and of fabricated by 3.0 mm thick SS sheet over MS 40 X 40 x 6 mm thick angle iron frame of requried type for support with double door both sides open type with necessary locking arrangement with slopped roof on top duly painted with two coats of powder coated semense gray paint complete and having separate doors inside for accomodating all incomming / out going feeders of suitable sizes all as specified and directed (For OR Living, FPO Bldg, Edu Bldg and other bldg) :- (a) MCCB 4 Pole 100 amps ,415 Volt of breaking capacity not less than 25 KA (Ics=100 % of Icu) with adjustable thermal setting (Optium 2.0) - 01 No for incoming. (b) Copper Busbar 140 Amps duly sleev insulated for set of 3 phase, 4 wire system and branch connection of suitable size of outgoing current rating of MCCBs - 01 Set. Outgoings :- (c) MCCB 63 Amp 415 V 10 KA- 01 Nos,(d) MCCB 32 Amp 415 V 16 KA- 02 Nos Supply, installations, testing and commissioning factory made out door cubical type LT panel board dust and vermin proof , free standing, floor mounting type mounted on and incluidng 1:3:6 PCC foundation as requried at site and of fabricated by 3.0 mm thick SS sheet over MS 40 X 40 x 6 mm thick angle iron frame of requried type for support with double door both sides open type with necessary locking arrangement with slopped roof on top duly painted with two coats of powder coated semense gray paint complete and having separate doors inside for accomodating all incomming / out going feeders of suitable sizes all as specified and directed (For OR Living, FPO Bldg, Edu Bldg and other bldg) :- (a) MCCB 4 Pole 100 amps ,415 Volt of breaking capacity not less than 25 KA (Ics=100 % of Icu) with adjustable thermal setting (Optium 2.0) - 01 No for incoming. (b) Copper Busbar 140 Amps duly sleev insulated for set of 3 phase, 4 wire system and branch connection of suitable size of outgoing current rating of MCCBs - 01 Set. Outgoings :- (c) MCCB 63 Amp 415 V 10 KA- 01 Nos,(d) MCCB 32 Amp 415 V 16 KA- 02 Nos Supply, installations, testing and commissioning factory made out door cubical type LT panel board dust and vermin proof , free standing, floor mounting type mounted on and incluidng 1:3:6 PCC foundation as requried at site and of fabricated by 3.0 mm thick SS sheet over MS 40 X 40 x 6 mm thick angle iron frame of requried type for support with double door both sides open type with necessary locking arrangement with slopped roof on top duly painted with two coats of powder coated semense gray paint complete and having separate doors inside for accomodating all incomming / out going feeders of suitable sizes all as specified and directed (For OR Living, FPO Bldg, Edu Bldg and other bldg) :- (a) MCCB 4 Pole 100 amps ,415 Volt of breaking capacity not less than 25 KA (Ics=100 % of Icu) with adjustable thermal setting (Optium 2.0) - 01 No for incoming. (b) Copper Busbar 140 Amps duly sleev insulated for set of 3 phase, 4 wire system and branch connection of suitable size of outgoing current rating of MCCBs - 01 Set. Outgoings :- (c) MCCB 63 Amp 415 V 10 KA- 01 Nos,(d) MCCB 32 Amp 415 V 16 KA- 02 Nos Supply, installations, testing and commissioning factory made out door cubical type LT panel board dust and vermin proof , free standing, floor mounting type mounted on and incluidng 1:3:6 PCC foundation as requried at site and of fabricated by 3.0 mm thick SS sheet over MS 40 X 40 x 6 mm thick angle iron frame of requried type for support with double door both sides open type with necessary locking arrangement with slopped roof on top duly painted with two coats of powder coated semense gray paint complete and having separate doors inside for accomodating all incomming / out going feeders of suitable sizes all as specified and directed (For OR Living, FPO Bldg, Edu Bldg and other bldg) :- (a) MCCB 4 Pole 100 amps ,415 Volt of breaking capacity not less than 25 KA (Ics=100 % of Icu) with adjustable thermal setting (Optium 2.0) - 01 No for incoming. (b) Copper Busbar 140 Amps duly sleev insulated for set of 3 phase, 4 wire system and branch connection of suitable size of outgoing current rating of MCCBs - 01 Set. Outgoings :- (c) MCCB 63 Amp 415 V 10 KA- 01 Nos,(d) MCCB 32 Amp 415 V 16 KA- 02 Nos Supply, installations, testing and commissioning factory made out door cubical type LT panel board dust and vermin proof , free standing, floor mounting type mounted on and incluidng 1:3:6 PCC foundation as requried at site and of fabricated by 3.0 mm thick SS sheet over MS 40 X 40 x 6 mm thick angle iron frame of requried type for support with double door both sides open type with necessary locking arrangement with slopped roof on top duly painted with two coats of powder coated semense gray paint complete and having separate doors inside for accomodating all incomming / out going feeders of suitable sizes all as specified and directed (For OR Living, FPO Bldg, Edu Bldg and other bldg) :- (a) MCCB 4 Pole 100 amps ,415 Volt of breaking capacity not less than 25 KA (Ics=100 % of Icu) with adjustable thermal setting (Optium 2.0) - 01 No for incoming. (b) Copper Busbar 140 Amps duly sleev insulated for set of 3 phase, 4 wire system and branch connection of suitable size of outgoing current rating of MCCBs - 01 Set. Outgoings :- (c) MCCB 63 Amp 415 V 10 KA- 01 Nos,(d) MCCB 32 Amp 415 V 16 KA- 02 Nos Supply, installations, testing and commissioning factory made out door cubical type LT panel board dust and vermin proof , free standing, floor mounting type mounted on and incluidng 1:3:6 PCC foundation as requried at site and of fabricated by 3.0 mm thick SS sheet over MS 40 X 40 x 6 mm thick angle iron frame of requried type for support with double door both sides open type with necessary locking arrangement with slopped roof on top duly painted with two coats of powder coated semense gray paint complete and having separate doors inside for accomodating all incomming / out going feeders of suitable sizes all as specified and directed (For OR Living, FPO Bldg, Edu Bldg and other bldg) :- (a) MCCB 4 Pole 100 amps ,415 Volt of breaking capacity not less than 25 KA (Ics=100 % of Icu) with adjustable thermal setting (Optium 2.0) - 01 No for incoming. (b) Copper Busbar 140 Amps duly sleev insulated for set of 3 phase, 4 wire system and branch connection of suitable size of outgoing current rating of MCCBs - 01 Set. Outgoings :- (c) MCCB 63 Amp 415 V 10 KA- 01 Nos,(d) MCCB 32 Amp 415 V 16 KA- 02 Nos Supply, installations, testing and commissioning factory made out door cubical type LT panel board dust and vermin proof , free standing, floor mounting type mounted on and incluidng 1:3:6 PCC foundation as requried at site and of fabricated by 3.0 mm thick SS sheet over MS 40 X 40 x 6 mm thick angle iron frame of requried type for support with double door both sides open type with necessary locking arrangement with slopped roof on top duly painted with two coats of powder coated semense gray paint complete and having separate doors inside for accomodating all incomming / out going feeders of suitable sizes all as specified and directed (For OR Living, FPO Bldg, Edu Bldg and other bldg) :- (a) MCCB 4 Pole 100 amps ,415 Volt of breaking capacity not less than 25 KA (Ics=100 % of Icu) with adjustable thermal setting (Optium 2.0) - 01 No for incoming. (b) Copper Busbar 140 Amps duly sleev insulated for set of 3 phase, 4 wire system and branch connection of suitable size of outgoing current rating of MCCBs - 01 Set. Outgoings :- (c) MCCB 63 Amp 415 V 10 KA- 01 Nos,(d) MCCB 32 Amp 415 V 16 KA- 02 Nos 7 Supply, installations, testing and commissioning factory made out door cubical type LT panel board dust and vermin proof , free standing, floor mounting type mounted on and incluidng 1:3:6 PCC foundation as requried at site and of fabricated by 3.0 mm thick SS sheet over MS 40 X 40 x 6 mm thick angle iron frame of requried type for support with double door both sides open type with necessary locking arrangement with slopped roof on top duly painted with two coats of powder coated semense gray paint complete and having separate doors inside for accomodating all incomming / out going feeders of suitable sizes all as specified and directed (For OR Living, FPO Bldg, Edu Bldg and other bldg) :- (a) MCCB 4 Pole 100 amps ,415 Volt of breaking capacity not less than 25 KA (Ics=100 % of Icu) with adjustable thermal setting (Optium 2.0) - 01 No for incoming. (b) Copper Busbar 140 Amps duly sleev insulated for set of 3 phase, 4 wire system and branch connection of suitable size of outgoing current rating of MCCBs - 01 Set. Outgoings :- (c) MCCB 63 Amp 415 V 10 KA- 01 Nos,(d) MCCB 32 Amp 415 V 16 KA- 02 Nos 8 9

1 0 86603372.38 Item 23.07 (Contd/-) (e) Digital Voltmeter 0-500 V with selector switch- 01 No (f) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (g) LED Indicating Lamps R,Y,B - 01 set (h) Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switch 230V AC, Auto/Manual selector switch, MCB TPN, 32 Amps, ON/OFF indicator all prewired and making provision for fixing outgoing cables. - 01 Set complete. Item 23.07 (Contd/-) (e) Digital Voltmeter 0-500 V with selector switch- 01 No (f) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (g) LED Indicating Lamps R,Y,B - 01 set (h) Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switch 230V AC, Auto/Manual selector switch, MCB TPN, 32 Amps, ON/OFF indicator all prewired and making provision for fixing outgoing cables. - 01 Set complete. Item 23.07 (Contd/-) (e) Digital Voltmeter 0-500 V with selector switch- 01 No (f) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (g) LED Indicating Lamps R,Y,B - 01 set (h) Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switch 230V AC, Auto/Manual selector switch, MCB TPN, 32 Amps, ON/OFF indicator all prewired and making provision for fixing outgoing cables. - 01 Set complete. 1 Item 23.07 (Contd/-) (e) Digital Voltmeter 0-500 V with selector switch- 01 No (f) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (g) LED Indicating Lamps R,Y,B - 01 set (h) Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switch 230V AC, Auto/Manual selector switch, MCB TPN, 32 Amps, ON/OFF indicator all prewired and making provision for fixing outgoing cables. - 01 Set complete. Item 23.07 (Contd/-) (e) Digital Voltmeter 0-500 V with selector switch- 01 No (f) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (g) LED Indicating Lamps R,Y,B - 01 set (h) Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switch 230V AC, Auto/Manual selector switch, MCB TPN, 32 Amps, ON/OFF indicator all prewired and making provision for fixing outgoing cables. - 01 Set complete. Item 23.07 (Contd/-) (e) Digital Voltmeter 0-500 V with selector switch- 01 No (f) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (g) LED Indicating Lamps R,Y,B - 01 set (h) Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switch 230V AC, Auto/Manual selector switch, MCB TPN, 32 Amps, ON/OFF indicator all prewired and making provision for fixing outgoing cables. - 01 Set complete. Item 23.07 (Contd/-) (e) Digital Voltmeter 0-500 V with selector switch- 01 No (f) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (g) LED Indicating Lamps R,Y,B - 01 set (h) Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switch 230V AC, Auto/Manual selector switch, MCB TPN, 32 Amps, ON/OFF indicator all prewired and making provision for fixing outgoing cables. - 01 Set complete. Item 23.07 (Contd/-) (e) Digital Voltmeter 0-500 V with selector switch- 01 No (f) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (g) LED Indicating Lamps R,Y,B - 01 set (h) Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switch 230V AC, Auto/Manual selector switch, MCB TPN, 32 Amps, ON/OFF indicator all prewired and making provision for fixing outgoing cables. - 01 Set complete. Item 23.07 (Contd/-) (e) Digital Voltmeter 0-500 V with selector switch- 01 No (f) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (g) LED Indicating Lamps R,Y,B - 01 set (h) Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switch 230V AC, Auto/Manual selector switch, MCB TPN, 32 Amps, ON/OFF indicator all prewired and making provision for fixing outgoing cables. - 01 Set complete. Item 23.07 (Contd/-) (e) Digital Voltmeter 0-500 V with selector switch- 01 No (f) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (g) LED Indicating Lamps R,Y,B - 01 set (h) Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switch 230V AC, Auto/Manual selector switch, MCB TPN, 32 Amps, ON/OFF indicator all prewired and making provision for fixing outgoing cables. - 01 Set complete. Item 23.07 (Contd/-) (e) Digital Voltmeter 0-500 V with selector switch- 01 No (f) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (g) LED Indicating Lamps R,Y,B - 01 set (h) Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switch 230V AC, Auto/Manual selector switch, MCB TPN, 32 Amps, ON/OFF indicator all prewired and making provision for fixing outgoing cables. - 01 Set complete. Item 23.07 (Contd/-) (e) Digital Voltmeter 0-500 V with selector switch- 01 No (f) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (g) LED Indicating Lamps R,Y,B - 01 set (h) Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switch 230V AC, Auto/Manual selector switch, MCB TPN, 32 Amps, ON/OFF indicator all prewired and making provision for fixing outgoing cables. - 01 Set complete. Item 23.07 (Contd/-) (e) Digital Voltmeter 0-500 V with selector switch- 01 No (f) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (g) LED Indicating Lamps R,Y,B - 01 set (h) Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switch 230V AC, Auto/Manual selector switch, MCB TPN, 32 Amps, ON/OFF indicator all prewired and making provision for fixing outgoing cables. - 01 Set complete. Item 23.07 (Contd/-) (e) Digital Voltmeter 0-500 V with selector switch- 01 No (f) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (g) LED Indicating Lamps R,Y,B - 01 set (h) Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switch 230V AC, Auto/Manual selector switch, MCB TPN, 32 Amps, ON/OFF indicator all prewired and making provision for fixing outgoing cables. - 01 Set complete. Item 23.07 (Contd/-) (e) Digital Voltmeter 0-500 V with selector switch- 01 No (f) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (g) LED Indicating Lamps R,Y,B - 01 set (h) Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switch 230V AC, Auto/Manual selector switch, MCB TPN, 32 Amps, ON/OFF indicator all prewired and making provision for fixing outgoing cables. - 01 Set complete. Item 23.07 (Contd/-) (e) Digital Voltmeter 0-500 V with selector switch- 01 No (f) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (g) LED Indicating Lamps R,Y,B - 01 set (h) Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switch 230V AC, Auto/Manual selector switch, MCB TPN, 32 Amps, ON/OFF indicator all prewired and making provision for fixing outgoing cables. - 01 Set complete. Item 23.07 (Contd/-) (e) Digital Voltmeter 0-500 V with selector switch- 01 No (f) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (g) LED Indicating Lamps R,Y,B - 01 set (h) Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switch 230V AC, Auto/Manual selector switch, MCB TPN, 32 Amps, ON/OFF indicator all prewired and making provision for fixing outgoing cables. - 01 Set complete. Item 23.07 (Contd/-) (e) Digital Voltmeter 0-500 V with selector switch- 01 No (f) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (g) LED Indicating Lamps R,Y,B - 01 set (h) Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switch 230V AC, Auto/Manual selector switch, MCB TPN, 32 Amps, ON/OFF indicator all prewired and making provision for fixing outgoing cables. - 01 Set complete. Item 23.07 (Contd/-) (e) Digital Voltmeter 0-500 V with selector switch- 01 No (f) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (g) LED Indicating Lamps R,Y,B - 01 set (h) Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switch 230V AC, Auto/Manual selector switch, MCB TPN, 32 Amps, ON/OFF indicator all prewired and making provision for fixing outgoing cables. - 01 Set complete. Item 23.07 (Contd/-) (e) Digital Voltmeter 0-500 V with selector switch- 01 No (f) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (g) LED Indicating Lamps R,Y,B - 01 set (h) Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switch 230V AC, Auto/Manual selector switch, MCB TPN, 32 Amps, ON/OFF indicator all prewired and making provision for fixing outgoing cables. - 01 Set complete. Item 23.07 (Contd/-) (e) Digital Voltmeter 0-500 V with selector switch- 01 No (f) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (g) LED Indicating Lamps R,Y,B - 01 set (h) Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switch 230V AC, Auto/Manual selector switch, MCB TPN, 32 Amps, ON/OFF indicator all prewired and making provision for fixing outgoing cables. - 01 Set complete. Item 23.07 (Contd/-) (e) Digital Voltmeter 0-500 V with selector switch- 01 No (f) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (g) LED Indicating Lamps R,Y,B - 01 set (h) Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switch 230V AC, Auto/Manual selector switch, MCB TPN, 32 Amps, ON/OFF indicator all prewired and making provision for fixing outgoing cables. - 01 Set complete. Item 23.07 (Contd/-) (e) Digital Voltmeter 0-500 V with selector switch- 01 No (f) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (g) LED Indicating Lamps R,Y,B - 01 set (h) Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switch 230V AC, Auto/Manual selector switch, MCB TPN, 32 Amps, ON/OFF indicator all prewired and making provision for fixing outgoing cables. - 01 Set complete. Item 23.07 (Contd/-) (e) Digital Voltmeter 0-500 V with selector switch- 01 No (f) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (g) LED Indicating Lamps R,Y,B - 01 set (h) Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switch 230V AC, Auto/Manual selector switch, MCB TPN, 32 Amps, ON/OFF indicator all prewired and making provision for fixing outgoing cables. - 01 Set complete. Item 23.07 (Contd/-) (e) Digital Voltmeter 0-500 V with selector switch- 01 No (f) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (g) LED Indicating Lamps R,Y,B - 01 set (h) Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switch 230V AC, Auto/Manual selector switch, MCB TPN, 32 Amps, ON/OFF indicator all prewired and making provision for fixing outgoing cables. - 01 Set complete. Item 23.07 (Contd/-) (e) Digital Voltmeter 0-500 V with selector switch- 01 No (f) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (g) LED Indicating Lamps R,Y,B - 01 set (h) Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switch 230V AC, Auto/Manual selector switch, MCB TPN, 32 Amps, ON/OFF indicator all prewired and making provision for fixing outgoing cables. - 01 Set complete. Item 23.07 (Contd/-) (e) Digital Voltmeter 0-500 V with selector switch- 01 No (f) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (g) LED Indicating Lamps R,Y,B - 01 set (h) Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switch 230V AC, Auto/Manual selector switch, MCB TPN, 32 Amps, ON/OFF indicator all prewired and making provision for fixing outgoing cables. - 01 Set complete. Item 23.07 (Contd/-) (e) Digital Voltmeter 0-500 V with selector switch- 01 No (f) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (g) LED Indicating Lamps R,Y,B - 01 set (h) Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switch 230V AC, Auto/Manual selector switch, MCB TPN, 32 Amps, ON/OFF indicator all prewired and making provision for fixing outgoing cables. - 01 Set complete. Item 23.07 (Contd/-) (e) Digital Voltmeter 0-500 V with selector switch- 01 No (f) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (g) LED Indicating Lamps R,Y,B - 01 set (h) Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switch 230V AC, Auto/Manual selector switch, MCB TPN, 32 Amps, ON/OFF indicator all prewired and making provision for fixing outgoing cables. - 01 Set complete. Item 23.07 (Contd/-) (e) Digital Voltmeter 0-500 V with selector switch- 01 No (f) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (g) LED Indicating Lamps R,Y,B - 01 set (h) Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switch 230V AC, Auto/Manual selector switch, MCB TPN, 32 Amps, ON/OFF indicator all prewired and making provision for fixing outgoing cables. - 01 Set complete. Item 23.07 (Contd/-) (e) Digital Voltmeter 0-500 V with selector switch- 01 No (f) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (g) LED Indicating Lamps R,Y,B - 01 set (h) Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switch 230V AC, Auto/Manual selector switch, MCB TPN, 32 Amps, ON/OFF indicator all prewired and making provision for fixing outgoing cables. - 01 Set complete. Item 23.07 (Contd/-) (e) Digital Voltmeter 0-500 V with selector switch- 01 No (f) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (g) LED Indicating Lamps R,Y,B - 01 set (h) Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switch 230V AC, Auto/Manual selector switch, MCB TPN, 32 Amps, ON/OFF indicator all prewired and making provision for fixing outgoing cables. - 01 Set complete. Item 23.07 (Contd/-) (e) Digital Voltmeter 0-500 V with selector switch- 01 No (f) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (g) LED Indicating Lamps R,Y,B - 01 set (h) Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switch 230V AC, Auto/Manual selector switch, MCB TPN, 32 Amps, ON/OFF indicator all prewired and making provision for fixing outgoing cables. - 01 Set complete. Item 23.07 (Contd/-) (e) Digital Voltmeter 0-500 V with selector switch- 01 No (f) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (g) LED Indicating Lamps R,Y,B - 01 set (h) Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switch 230V AC, Auto/Manual selector switch, MCB TPN, 32 Amps, ON/OFF indicator all prewired and making provision for fixing outgoing cables. - 01 Set complete. Item 23.07 (Contd/-) (e) Digital Voltmeter 0-500 V with selector switch- 01 No (f) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (g) LED Indicating Lamps R,Y,B - 01 set (h) Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switch 230V AC, Auto/Manual selector switch, MCB TPN, 32 Amps, ON/OFF indicator all prewired and making provision for fixing outgoing cables. - 01 Set complete. Item 23.07 (Contd/-) (e) Digital Voltmeter 0-500 V with selector switch- 01 No (f) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (g) LED Indicating Lamps R,Y,B - 01 set (h) Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switch 230V AC, Auto/Manual selector switch, MCB TPN, 32 Amps, ON/OFF indicator all prewired and making provision for fixing outgoing cables. - 01 Set complete. Item 23.07 (Contd/-) (e) Digital Voltmeter 0-500 V with selector switch- 01 No (f) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (g) LED Indicating Lamps R,Y,B - 01 set (h) Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switch 230V AC, Auto/Manual selector switch, MCB TPN, 32 Amps, ON/OFF indicator all prewired and making provision for fixing outgoing cables. - 01 Set complete. Item 23.07 (Contd/-) (e) Digital Voltmeter 0-500 V with selector switch- 01 No (f) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (g) LED Indicating Lamps R,Y,B - 01 set (h) Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switch 230V AC, Auto/Manual selector switch, MCB TPN, 32 Amps, ON/OFF indicator all prewired and making provision for fixing outgoing cables. - 01 Set complete. Item 23.07 (Contd/-) (e) Digital Voltmeter 0-500 V with selector switch- 01 No (f) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (g) LED Indicating Lamps R,Y,B - 01 set (h) Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switch 230V AC, Auto/Manual selector switch, MCB TPN, 32 Amps, ON/OFF indicator all prewired and making provision for fixing outgoing cables. - 01 Set complete. Item 23.07 (Contd/-) (e) Digital Voltmeter 0-500 V with selector switch- 01 No (f) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (g) LED Indicating Lamps R,Y,B - 01 set (h) Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switch 230V AC, Auto/Manual selector switch, MCB TPN, 32 Amps, ON/OFF indicator all prewired and making provision for fixing outgoing cables. - 01 Set complete. Item 23.07 (Contd/-) (e) Digital Voltmeter 0-500 V with selector switch- 01 No (f) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (g) LED Indicating Lamps R,Y,B - 01 set (h) Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switch 230V AC, Auto/Manual selector switch, MCB TPN, 32 Amps, ON/OFF indicator all prewired and making provision for fixing outgoing cables. - 01 Set complete. Item 23.07 (Contd/-) (e) Digital Voltmeter 0-500 V with selector switch- 01 No (f) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (g) LED Indicating Lamps R,Y,B - 01 set (h) Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switch 230V AC, Auto/Manual selector switch, MCB TPN, 32 Amps, ON/OFF indicator all prewired and making provision for fixing outgoing cables. - 01 Set complete. Item 23.07 (Contd/-) (e) Digital Voltmeter 0-500 V with selector switch- 01 No (f) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (g) LED Indicating Lamps R,Y,B - 01 set (h) Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switch 230V AC, Auto/Manual selector switch, MCB TPN, 32 Amps, ON/OFF indicator all prewired and making provision for fixing outgoing cables. - 01 Set complete. Item 23.07 (Contd/-) (e) Digital Voltmeter 0-500 V with selector switch- 01 No (f) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (g) LED Indicating Lamps R,Y,B - 01 set (h) Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switch 230V AC, Auto/Manual selector switch, MCB TPN, 32 Amps, ON/OFF indicator all prewired and making provision for fixing outgoing cables. - 01 Set complete. 0 Item 23.07 (Contd/-) (e) Digital Voltmeter 0-500 V with selector switch- 01 No (f) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (g) LED Indicating Lamps R,Y,B - 01 set (h) Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switch 230V AC, Auto/Manual selector switch, MCB TPN, 32 Amps, ON/OFF indicator all prewired and making provision for fixing outgoing cables. - 01 Set complete. 0 -100

1 0 4305194.31 Lump sum price worked out by the contractor for "BUILDING WORKS" as listed in Schedule ‘A’ Part-I representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 1.00 Lump sum price worked out by the contractor for "BUILDING WORKS" as listed in Schedule ‘A’ Part-I representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 1.00 Lump sum price worked out by the contractor for "BUILDING WORKS" as listed in Schedule ‘A’ Part-I representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 1.00 1 Lump sum price worked out by the contractor for "BUILDING WORKS" as listed in Schedule ‘A’ Part-I representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 1.00 Lump sum price worked out by the contractor for "BUILDING WORKS" as listed in Schedule ‘A’ Part-I representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 1.00 Lump sum price worked out by the contractor for "BUILDING WORKS" as listed in Schedule ‘A’ Part-I representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 1.00 Lump sum price worked out by the contractor for "BUILDING WORKS" as listed in Schedule ‘A’ Part-I representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 1.00 Lump sum price worked out by the contractor for "BUILDING WORKS" as listed in Schedule ‘A’ Part-I representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 1.00 Lump sum price worked out by the contractor for "BUILDING WORKS" as listed in Schedule ‘A’ Part-I representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 1.00 Lump sum price worked out by the contractor for "BUILDING WORKS" as listed in Schedule ‘A’ Part-I representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 1.00 Lump sum price worked out by the contractor for "BUILDING WORKS" as listed in Schedule ‘A’ Part-I representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 1.00 Lump sum price worked out by the contractor for "BUILDING WORKS" as listed in Schedule ‘A’ Part-I representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 1.00 Lump sum price worked out by the contractor for "BUILDING WORKS" as listed in Schedule ‘A’ Part-I representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 1.00 Lump sum price worked out by the contractor for "BUILDING WORKS" as listed in Schedule ‘A’ Part-I representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 1.00 Lump sum price worked out by the contractor for "BUILDING WORKS" as listed in Schedule ‘A’ Part-I representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 1.00 Lump sum price worked out by the contractor for "BUILDING WORKS" as listed in Schedule ‘A’ Part-I representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 1.00 Lump sum price worked out by the contractor for "BUILDING WORKS" as listed in Schedule ‘A’ Part-I representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 1.00 Lump sum price worked out by the contractor for "BUILDING WORKS" as listed in Schedule ‘A’ Part-I representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 1.00 Lump sum price worked out by the contractor for "BUILDING WORKS" as listed in Schedule ‘A’ Part-I representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 1.00 Lump sum price worked out by the contractor for "BUILDING WORKS" as listed in Schedule ‘A’ Part-I representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 1.00 Lump sum price worked out by the contractor for "BUILDING WORKS" as listed in Schedule ‘A’ Part-I representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 1.00 Lump sum price worked out by the contractor for "BUILDING WORKS" as listed in Schedule ‘A’ Part-I representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 1.00 Lump sum price worked out by the contractor for "BUILDING WORKS" as listed in Schedule ‘A’ Part-I representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 1.00 Lump sum price worked out by the contractor for "BUILDING WORKS" as listed in Schedule ‘A’ Part-I representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 1.00 Lump sum price worked out by the contractor for "BUILDING WORKS" as listed in Schedule ‘A’ Part-I representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 1.00 Lump sum price worked out by the contractor for "BUILDING WORKS" as listed in Schedule ‘A’ Part-I representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 1.00 Lump sum price worked out by the contractor for "BUILDING WORKS" as listed in Schedule ‘A’ Part-I representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 1.00 Lump sum price worked out by the contractor for "BUILDING WORKS" as listed in Schedule ‘A’ Part-I representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 1.00 Lump sum price worked out by the contractor for "BUILDING WORKS" as listed in Schedule ‘A’ Part-I representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 1.00 Lump sum price worked out by the contractor for "BUILDING WORKS" as listed in Schedule ‘A’ Part-I representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 1.00 Lump sum price worked out by the contractor for "BUILDING WORKS" as listed in Schedule ‘A’ Part-I representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 1.00 Lump sum price worked out by the contractor for "BUILDING WORKS" as listed in Schedule ‘A’ Part-I representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 1.00 Lump sum price worked out by the contractor for "BUILDING WORKS" as listed in Schedule ‘A’ Part-I representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 1.00 Lump sum price worked out by the contractor for "BUILDING WORKS" as listed in Schedule ‘A’ Part-I representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 1.00 Lump sum price worked out by the contractor for "BUILDING WORKS" as listed in Schedule ‘A’ Part-I representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 1.00 Lump sum price worked out by the contractor for "BUILDING WORKS" as listed in Schedule ‘A’ Part-I representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 1.00 Lump sum price worked out by the contractor for "BUILDING WORKS" as listed in Schedule ‘A’ Part-I representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 1.00 Lump sum price worked out by the contractor for "BUILDING WORKS" as listed in Schedule ‘A’ Part-I representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 1.00 Lump sum price worked out by the contractor for "BUILDING WORKS" as listed in Schedule ‘A’ Part-I representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 1.00 Lump sum price worked out by the contractor for "BUILDING WORKS" as listed in Schedule ‘A’ Part-I representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 1.00 Lump sum price worked out by the contractor for "BUILDING WORKS" as listed in Schedule ‘A’ Part-I representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 1.00 Lump sum price worked out by the contractor for "BUILDING WORKS" as listed in Schedule ‘A’ Part-I representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 1.00 Lump sum price worked out by the contractor for "BUILDING WORKS" as listed in Schedule ‘A’ Part-I representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 1.00 Lump sum price worked out by the contractor for "BUILDING WORKS" as listed in Schedule ‘A’ Part-I representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 1.00 0 Lump sum price worked out by the contractor for "BUILDING WORKS" as listed in Schedule ‘A’ Part-I representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 1.00 0 -100

1 0 9791040.89 Lump sum price worked out by the contractor for "INTERNAL WATER SUPPLY " as listed in Schedule ‘A’ Part-II representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES Lump sum price worked out by the contractor for "INTERNAL WATER SUPPLY " as listed in Schedule ‘A’ Part-II representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES Lump sum price worked out by the contractor for "INTERNAL WATER SUPPLY " as listed in Schedule ‘A’ Part-II representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 1 Lump sum price worked out by the contractor for "INTERNAL WATER SUPPLY " as listed in Schedule ‘A’ Part-II representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES Lump sum price worked out by the contractor for "INTERNAL WATER SUPPLY " as listed in Schedule ‘A’ Part-II representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES Lump sum price worked out by the contractor for "INTERNAL WATER SUPPLY " as listed in Schedule ‘A’ Part-II representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES Lump sum price worked out by the contractor for "INTERNAL WATER SUPPLY " as listed in Schedule ‘A’ Part-II representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES Lump sum price worked out by the contractor for "INTERNAL WATER SUPPLY " as listed in Schedule ‘A’ Part-II representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES Lump sum price worked out by the contractor for "INTERNAL WATER SUPPLY " as listed in Schedule ‘A’ Part-II representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES Lump sum price worked out by the contractor for "INTERNAL WATER SUPPLY " as listed in Schedule ‘A’ Part-II representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES Lump sum price worked out by the contractor for "INTERNAL WATER SUPPLY " as listed in Schedule ‘A’ Part-II representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES Lump sum price worked out by the contractor for "INTERNAL WATER SUPPLY " as listed in Schedule ‘A’ Part-II representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES Lump sum price worked out by the contractor for "INTERNAL WATER SUPPLY " as listed in Schedule ‘A’ Part-II representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES Lump sum price worked out by the contractor for "INTERNAL WATER SUPPLY " as listed in Schedule ‘A’ Part-II representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES Lump sum price worked out by the contractor for "INTERNAL WATER SUPPLY " as listed in Schedule ‘A’ Part-II representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES Lump sum price worked out by the contractor for "INTERNAL WATER SUPPLY " as listed in Schedule ‘A’ Part-II representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES Lump sum price worked out by the contractor for "INTERNAL WATER SUPPLY " as listed in Schedule ‘A’ Part-II representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES Lump sum price worked out by the contractor for "INTERNAL WATER SUPPLY " as listed in Schedule ‘A’ Part-II representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES Lump sum price worked out by the contractor for "INTERNAL WATER SUPPLY " as listed in Schedule ‘A’ Part-II representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES Lump sum price worked out by the contractor for "INTERNAL WATER SUPPLY " as listed in Schedule ‘A’ Part-II representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES Lump sum price worked out by the contractor for "INTERNAL WATER SUPPLY " as listed in Schedule ‘A’ Part-II representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES Lump sum price worked out by the contractor for "INTERNAL WATER SUPPLY " as listed in Schedule ‘A’ Part-II representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES Lump sum price worked out by the contractor for "INTERNAL WATER SUPPLY " as listed in Schedule ‘A’ Part-II representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES Lump sum price worked out by the contractor for "INTERNAL WATER SUPPLY " as listed in Schedule ‘A’ Part-II representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES Lump sum price worked out by the contractor for "INTERNAL WATER SUPPLY " as listed in Schedule ‘A’ Part-II representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES Lump sum price worked out by the contractor for "INTERNAL WATER SUPPLY " as listed in Schedule ‘A’ Part-II representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES Lump sum price worked out by the contractor for "INTERNAL WATER SUPPLY " as listed in Schedule ‘A’ Part-II representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES Lump sum price worked out by the contractor for "INTERNAL WATER SUPPLY " as listed in Schedule ‘A’ Part-II representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES Lump sum price worked out by the contractor for "INTERNAL WATER SUPPLY " as listed in Schedule ‘A’ Part-II representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES Lump sum price worked out by the contractor for "INTERNAL WATER SUPPLY " as listed in Schedule ‘A’ Part-II representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES Lump sum price worked out by the contractor for "INTERNAL WATER SUPPLY " as listed in Schedule ‘A’ Part-II representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES Lump sum price worked out by the contractor for "INTERNAL WATER SUPPLY " as listed in Schedule ‘A’ Part-II representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES Lump sum price worked out by the contractor for "INTERNAL WATER SUPPLY " as listed in Schedule ‘A’ Part-II representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES Lump sum price worked out by the contractor for "INTERNAL WATER SUPPLY " as listed in Schedule ‘A’ Part-II representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES Lump sum price worked out by the contractor for "INTERNAL WATER SUPPLY " as listed in Schedule ‘A’ Part-II representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES Lump sum price worked out by the contractor for "INTERNAL WATER SUPPLY " as listed in Schedule ‘A’ Part-II representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES Lump sum price worked out by the contractor for "INTERNAL WATER SUPPLY " as listed in Schedule ‘A’ Part-II representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES Lump sum price worked out by the contractor for "INTERNAL WATER SUPPLY " as listed in Schedule ‘A’ Part-II representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES Lump sum price worked out by the contractor for "INTERNAL WATER SUPPLY " as listed in Schedule ‘A’ Part-II representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES Lump sum price worked out by the contractor for "INTERNAL WATER SUPPLY " as listed in Schedule ‘A’ Part-II representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES Lump sum price worked out by the contractor for "INTERNAL WATER SUPPLY " as listed in Schedule ‘A’ Part-II representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES Lump sum price worked out by the contractor for "INTERNAL WATER SUPPLY " as listed in Schedule ‘A’ Part-II representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES Lump sum price worked out by the contractor for "INTERNAL WATER SUPPLY " as listed in Schedule ‘A’ Part-II representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES Lump sum price worked out by the contractor for "INTERNAL WATER SUPPLY " as listed in Schedule ‘A’ Part-II representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 0 Lump sum price worked out by the contractor for "INTERNAL WATER SUPPLY " as listed in Schedule ‘A’ Part-II representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 0 -100

1 0 447702.67 Lump sum price worked out by the contractor for "INTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-III representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES Lump sum price worked out by the contractor for "INTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-III representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES Lump sum price worked out by the contractor for "INTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-III representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 1 Lump sum price worked out by the contractor for "INTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-III representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES Lump sum price worked out by the contractor for "INTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-III representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES Lump sum price worked out by the contractor for "INTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-III representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES Lump sum price worked out by the contractor for "INTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-III representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES Lump sum price worked out by the contractor for "INTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-III representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES Lump sum price worked out by the contractor for "INTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-III representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES Lump sum price worked out by the contractor for "INTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-III representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES Lump sum price worked out by the contractor for "INTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-III representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES Lump sum price worked out by the contractor for "INTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-III representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES Lump sum price worked out by the contractor for "INTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-III representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES Lump sum price worked out by the contractor for "INTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-III representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES Lump sum price worked out by the contractor for "INTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-III representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES Lump sum price worked out by the contractor for "INTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-III representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES Lump sum price worked out by the contractor for "INTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-III representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES Lump sum price worked out by the contractor for "INTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-III representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES Lump sum price worked out by the contractor for "INTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-III representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES Lump sum price worked out by the contractor for "INTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-III representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES Lump sum price worked out by the contractor for "INTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-III representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES Lump sum price worked out by the contractor for "INTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-III representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES Lump sum price worked out by the contractor for "INTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-III representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES Lump sum price worked out by the contractor for "INTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-III representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES Lump sum price worked out by the contractor for "INTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-III representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES Lump sum price worked out by the contractor for "INTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-III representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES Lump sum price worked out by the contractor for "INTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-III representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES Lump sum price worked out by the contractor for "INTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-III representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES Lump sum price worked out by the contractor for "INTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-III representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES Lump sum price worked out by the contractor for "INTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-III representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES Lump sum price worked out by the contractor for "INTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-III representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES Lump sum price worked out by the contractor for "INTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-III representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES Lump sum price worked out by the contractor for "INTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-III representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES Lump sum price worked out by the contractor for "INTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-III representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES Lump sum price worked out by the contractor for "INTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-III representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES Lump sum price worked out by the contractor for "INTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-III representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES Lump sum price worked out by the contractor for "INTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-III representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES Lump sum price worked out by the contractor for "INTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-III representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES Lump sum price worked out by the contractor for "INTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-III representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES Lump sum price worked out by the contractor for "INTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-III representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES Lump sum price worked out by the contractor for "INTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-III representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES Lump sum price worked out by the contractor for "INTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-III representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES Lump sum price worked out by the contractor for "INTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-III representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES Lump sum price worked out by the contractor for "INTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-III representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 0 Lump sum price worked out by the contractor for "INTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-III representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 0 -100

1 0 1825040.13 Lump sum price worked out by the contractor for "ROAD, PATH, CULVERT AND HARDSTANDING" as listed in Schedule ‘A’ Part-IV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced Lump sum price worked out by the contractor for "ROAD, PATH, CULVERT AND HARDSTANDING" as listed in Schedule ‘A’ Part-IV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced Lump sum price worked out by the contractor for "ROAD, PATH, CULVERT AND HARDSTANDING" as listed in Schedule ‘A’ Part-IV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced 1 Lump sum price worked out by the contractor for "ROAD, PATH, CULVERT AND HARDSTANDING" as listed in Schedule ‘A’ Part-IV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced Lump sum price worked out by the contractor for "ROAD, PATH, CULVERT AND HARDSTANDING" as listed in Schedule ‘A’ Part-IV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced Lump sum price worked out by the contractor for "ROAD, PATH, CULVERT AND HARDSTANDING" as listed in Schedule ‘A’ Part-IV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced Lump sum price worked out by the contractor for "ROAD, PATH, CULVERT AND HARDSTANDING" as listed in Schedule ‘A’ Part-IV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced Lump sum price worked out by the contractor for "ROAD, PATH, CULVERT AND HARDSTANDING" as listed in Schedule ‘A’ Part-IV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced Lump sum price worked out by the contractor for "ROAD, PATH, CULVERT AND HARDSTANDING" as listed in Schedule ‘A’ Part-IV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced Lump sum price worked out by the contractor for "ROAD, PATH, CULVERT AND HARDSTANDING" as listed in Schedule ‘A’ Part-IV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced Lump sum price worked out by the contractor for "ROAD, PATH, CULVERT AND HARDSTANDING" as listed in Schedule ‘A’ Part-IV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced Lump sum price worked out by the contractor for "ROAD, PATH, CULVERT AND HARDSTANDING" as listed in Schedule ‘A’ Part-IV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced Lump sum price worked out by the contractor for "ROAD, PATH, CULVERT AND HARDSTANDING" as listed in Schedule ‘A’ Part-IV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced Lump sum price worked out by the contractor for "ROAD, PATH, CULVERT AND HARDSTANDING" as listed in Schedule ‘A’ Part-IV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced Lump sum price worked out by the contractor for "ROAD, PATH, CULVERT AND HARDSTANDING" as listed in Schedule ‘A’ Part-IV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced Lump sum price worked out by the contractor for "ROAD, PATH, CULVERT AND HARDSTANDING" as listed in Schedule ‘A’ Part-IV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced Lump sum price worked out by the contractor for "ROAD, PATH, CULVERT AND HARDSTANDING" as listed in Schedule ‘A’ Part-IV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced Lump sum price worked out by the contractor for "ROAD, PATH, CULVERT AND HARDSTANDING" as listed in Schedule ‘A’ Part-IV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced Lump sum price worked out by the contractor for "ROAD, PATH, CULVERT AND HARDSTANDING" as listed in Schedule ‘A’ Part-IV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced Lump sum price worked out by the contractor for "ROAD, PATH, CULVERT AND HARDSTANDING" as listed in Schedule ‘A’ Part-IV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced Lump sum price worked out by the contractor for "ROAD, PATH, CULVERT AND HARDSTANDING" as listed in Schedule ‘A’ Part-IV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced Lump sum price worked out by the contractor for "ROAD, PATH, CULVERT AND HARDSTANDING" as listed in Schedule ‘A’ Part-IV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced Lump sum price worked out by the contractor for "ROAD, PATH, CULVERT AND HARDSTANDING" as listed in Schedule ‘A’ Part-IV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced Lump sum price worked out by the contractor for "ROAD, PATH, CULVERT AND HARDSTANDING" as listed in Schedule ‘A’ Part-IV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced Lump sum price worked out by the contractor for "ROAD, PATH, CULVERT AND HARDSTANDING" as listed in Schedule ‘A’ Part-IV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced Lump sum price worked out by the contractor for "ROAD, PATH, CULVERT AND HARDSTANDING" as listed in Schedule ‘A’ Part-IV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced Lump sum price worked out by the contractor for "ROAD, PATH, CULVERT AND HARDSTANDING" as listed in Schedule ‘A’ Part-IV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced Lump sum price worked out by the contractor for "ROAD, PATH, CULVERT AND HARDSTANDING" as listed in Schedule ‘A’ Part-IV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced Lump sum price worked out by the contractor for "ROAD, PATH, CULVERT AND HARDSTANDING" as listed in Schedule ‘A’ Part-IV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced Lump sum price worked out by the contractor for "ROAD, PATH, CULVERT AND HARDSTANDING" as listed in Schedule ‘A’ Part-IV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced Lump sum price worked out by the contractor for "ROAD, PATH, CULVERT AND HARDSTANDING" as listed in Schedule ‘A’ Part-IV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced Lump sum price worked out by the contractor for "ROAD, PATH, CULVERT AND HARDSTANDING" as listed in Schedule ‘A’ Part-IV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced Lump sum price worked out by the contractor for "ROAD, PATH, CULVERT AND HARDSTANDING" as listed in Schedule ‘A’ Part-IV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced Lump sum price worked out by the contractor for "ROAD, PATH, CULVERT AND HARDSTANDING" as listed in Schedule ‘A’ Part-IV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced Lump sum price worked out by the contractor for "ROAD, PATH, CULVERT AND HARDSTANDING" as listed in Schedule ‘A’ Part-IV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced Lump sum price worked out by the contractor for "ROAD, PATH, CULVERT AND HARDSTANDING" as listed in Schedule ‘A’ Part-IV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced Lump sum price worked out by the contractor for "ROAD, PATH, CULVERT AND HARDSTANDING" as listed in Schedule ‘A’ Part-IV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced Lump sum price worked out by the contractor for "ROAD, PATH, CULVERT AND HARDSTANDING" as listed in Schedule ‘A’ Part-IV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced Lump sum price worked out by the contractor for "ROAD, PATH, CULVERT AND HARDSTANDING" as listed in Schedule ‘A’ Part-IV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced Lump sum price worked out by the contractor for "ROAD, PATH, CULVERT AND HARDSTANDING" as listed in Schedule ‘A’ Part-IV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced Lump sum price worked out by the contractor for "ROAD, PATH, CULVERT AND HARDSTANDING" as listed in Schedule ‘A’ Part-IV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced Lump sum price worked out by the contractor for "ROAD, PATH, CULVERT AND HARDSTANDING" as listed in Schedule ‘A’ Part-IV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced Lump sum price worked out by the contractor for "ROAD, PATH, CULVERT AND HARDSTANDING" as listed in Schedule ‘A’ Part-IV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced Lump sum price worked out by the contractor for "ROAD, PATH, CULVERT AND HARDSTANDING" as listed in Schedule ‘A’ Part-IV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced 0 Lump sum price worked out by the contractor for "ROAD, PATH, CULVERT AND HARDSTANDING" as listed in Schedule ‘A’ Part-IV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced 0 -100

1 0 17884505.85 Lump sum price worked out by the co Lump sum price worked out by the co Lump sum price worked out by the co 1 Lump sum price worked out by the co Lump sum price worked out by the co Lump sum price worked out by the co Lump sum price worked out by the co Lump sum price worked out by the co Lump sum price worked out by the co Lump sum price worked out by the co Lump sum price worked out by the co Lump sum price worked out by the co Lump sum price worked out by the co Lump sum price worked out by the co Lump sum price worked out by the co Lump sum price worked out by the co Lump sum price worked out by the co Lump sum price worked out by the co Lump sum price worked out by the co Lump sum price worked out by the co Lump sum price worked out by the co Lump sum price worked out by the co Lump sum price worked out by the co Lump sum price worked out by the co Lump sum price worked out by the co Lump sum price worked out by the co Lump sum price worked out by the co Lump sum price worked out by the co Lump sum price worked out by the co Lump sum price worked out by the co Lump sum price worked out by the co Lump sum price worked out by the co Lump sum price worked out by the co Lump sum price worked out by the co Lump sum price worked out by the co Lump sum price worked out by the co Lump sum price worked out by the co Lump sum price worked out by the co Lump sum price worked out by the co Lump sum price worked out by the co Lump sum price worked out by the co Lump sum price worked out by the co Lump sum price worked out by the co Lump sum price worked out by the co 0 Lump sum price worked out by the co 0 -100

1 0 297044.67 ntractor for "SEWAGE DISPOSAL" as listed in Schedule ‘A’ Part-V representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 5.00 ntractor for "SEWAGE DISPOSAL" as listed in Schedule ‘A’ Part-V representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 5.00 ntractor for "SEWAGE DISPOSAL" as listed in Schedule ‘A’ Part-V representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 5.00 1 ntractor for "SEWAGE DISPOSAL" as listed in Schedule ‘A’ Part-V representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 5.00 ntractor for "SEWAGE DISPOSAL" as listed in Schedule ‘A’ Part-V representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 5.00 ntractor for "SEWAGE DISPOSAL" as listed in Schedule ‘A’ Part-V representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 5.00 ntractor for "SEWAGE DISPOSAL" as listed in Schedule ‘A’ Part-V representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 5.00 ntractor for "SEWAGE DISPOSAL" as listed in Schedule ‘A’ Part-V representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 5.00 ntractor for "SEWAGE DISPOSAL" as listed in Schedule ‘A’ Part-V representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 5.00 ntractor for "SEWAGE DISPOSAL" as listed in Schedule ‘A’ Part-V representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 5.00 ntractor for "SEWAGE DISPOSAL" as listed in Schedule ‘A’ Part-V representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 5.00 ntractor for "SEWAGE DISPOSAL" as listed in Schedule ‘A’ Part-V representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 5.00 ntractor for "SEWAGE DISPOSAL" as listed in Schedule ‘A’ Part-V representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 5.00 ntractor for "SEWAGE DISPOSAL" as listed in Schedule ‘A’ Part-V representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 5.00 ntractor for "SEWAGE DISPOSAL" as listed in Schedule ‘A’ Part-V representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 5.00 ntractor for "SEWAGE DISPOSAL" as listed in Schedule ‘A’ Part-V representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 5.00 ntractor for "SEWAGE DISPOSAL" as listed in Schedule ‘A’ Part-V representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 5.00 ntractor for "SEWAGE DISPOSAL" as listed in Schedule ‘A’ Part-V representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 5.00 ntractor for "SEWAGE DISPOSAL" as listed in Schedule ‘A’ Part-V representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 5.00 ntractor for "SEWAGE DISPOSAL" as listed in Schedule ‘A’ Part-V representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 5.00 ntractor for "SEWAGE DISPOSAL" as listed in Schedule ‘A’ Part-V representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 5.00 ntractor for "SEWAGE DISPOSAL" as listed in Schedule ‘A’ Part-V representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 5.00 ntractor for "SEWAGE DISPOSAL" as listed in Schedule ‘A’ Part-V representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 5.00 ntractor for "SEWAGE DISPOSAL" as listed in Schedule ‘A’ Part-V representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 5.00 ntractor for "SEWAGE DISPOSAL" as listed in Schedule ‘A’ Part-V representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 5.00 ntractor for "SEWAGE DISPOSAL" as listed in Schedule ‘A’ Part-V representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 5.00 ntractor for "SEWAGE DISPOSAL" as listed in Schedule ‘A’ Part-V representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 5.00 ntractor for "SEWAGE DISPOSAL" as listed in Schedule ‘A’ Part-V representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 5.00 ntractor for "SEWAGE DISPOSAL" as listed in Schedule ‘A’ Part-V representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 5.00 ntractor for "SEWAGE DISPOSAL" as listed in Schedule ‘A’ Part-V representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 5.00 ntractor for "SEWAGE DISPOSAL" as listed in Schedule ‘A’ Part-V representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 5.00 ntractor for "SEWAGE DISPOSAL" as listed in Schedule ‘A’ Part-V representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 5.00 ntractor for "SEWAGE DISPOSAL" as listed in Schedule ‘A’ Part-V representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 5.00 ntractor for "SEWAGE DISPOSAL" as listed in Schedule ‘A’ Part-V representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 5.00 ntractor for "SEWAGE DISPOSAL" as listed in Schedule ‘A’ Part-V representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 5.00 ntractor for "SEWAGE DISPOSAL" as listed in Schedule ‘A’ Part-V representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 5.00 ntractor for "SEWAGE DISPOSAL" as listed in Schedule ‘A’ Part-V representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 5.00 ntractor for "SEWAGE DISPOSAL" as listed in Schedule ‘A’ Part-V representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 5.00 ntractor for "SEWAGE DISPOSAL" as listed in Schedule ‘A’ Part-V representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 5.00 ntractor for "SEWAGE DISPOSAL" as listed in Schedule ‘A’ Part-V representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 5.00 ntractor for "SEWAGE DISPOSAL" as listed in Schedule ‘A’ Part-V representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 5.00 ntractor for "SEWAGE DISPOSAL" as listed in Schedule ‘A’ Part-V representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 5.00 ntractor for "SEWAGE DISPOSAL" as listed in Schedule ‘A’ Part-V representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 5.00 ntractor for "SEWAGE DISPOSAL" as listed in Schedule ‘A’ Part-V representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 5.00 0 ntractor for "SEWAGE DISPOSAL" as listed in Schedule ‘A’ Part-V representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 5.00 0 -100

1 0 384189.26 Lump sum price worked out by the contractor for "AREA DRAINAGE " as listed in Schedule ‘A’ Part-VI representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 6.00 Lump sum price worked out by the contractor for "AREA DRAINAGE " as listed in Schedule ‘A’ Part-VI representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 6.00 Lump sum price worked out by the contractor for "AREA DRAINAGE " as listed in Schedule ‘A’ Part-VI representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 6.00 1 Lump sum price worked out by the contractor for "AREA DRAINAGE " as listed in Schedule ‘A’ Part-VI representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 6.00 Lump sum price worked out by the contractor for "AREA DRAINAGE " as listed in Schedule ‘A’ Part-VI representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 6.00 Lump sum price worked out by the contractor for "AREA DRAINAGE " as listed in Schedule ‘A’ Part-VI representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 6.00 Lump sum price worked out by the contractor for "AREA DRAINAGE " as listed in Schedule ‘A’ Part-VI representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 6.00 Lump sum price worked out by the contractor for "AREA DRAINAGE " as listed in Schedule ‘A’ Part-VI representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 6.00 Lump sum price worked out by the contractor for "AREA DRAINAGE " as listed in Schedule ‘A’ Part-VI representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 6.00 Lump sum price worked out by the contractor for "AREA DRAINAGE " as listed in Schedule ‘A’ Part-VI representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 6.00 Lump sum price worked out by the contractor for "AREA DRAINAGE " as listed in Schedule ‘A’ Part-VI representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 6.00 Lump sum price worked out by the contractor for "AREA DRAINAGE " as listed in Schedule ‘A’ Part-VI representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 6.00 Lump sum price worked out by the contractor for "AREA DRAINAGE " as listed in Schedule ‘A’ Part-VI representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 6.00 Lump sum price worked out by the contractor for "AREA DRAINAGE " as listed in Schedule ‘A’ Part-VI representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 6.00 Lump sum price worked out by the contractor for "AREA DRAINAGE " as listed in Schedule ‘A’ Part-VI representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 6.00 Lump sum price worked out by the contractor for "AREA DRAINAGE " as listed in Schedule ‘A’ Part-VI representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 6.00 Lump sum price worked out by the contractor for "AREA DRAINAGE " as listed in Schedule ‘A’ Part-VI representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 6.00 Lump sum price worked out by the contractor for "AREA DRAINAGE " as listed in Schedule ‘A’ Part-VI representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 6.00 Lump sum price worked out by the contractor for "AREA DRAINAGE " as listed in Schedule ‘A’ Part-VI representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 6.00 Lump sum price worked out by the contractor for "AREA DRAINAGE " as listed in Schedule ‘A’ Part-VI representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 6.00 Lump sum price worked out by the contractor for "AREA DRAINAGE " as listed in Schedule ‘A’ Part-VI representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 6.00 Lump sum price worked out by the contractor for "AREA DRAINAGE " as listed in Schedule ‘A’ Part-VI representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 6.00 Lump sum price worked out by the contractor for "AREA DRAINAGE " as listed in Schedule ‘A’ Part-VI representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 6.00 Lump sum price worked out by the contractor for "AREA DRAINAGE " as listed in Schedule ‘A’ Part-VI representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 6.00 Lump sum price worked out by the contractor for "AREA DRAINAGE " as listed in Schedule ‘A’ Part-VI representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 6.00 Lump sum price worked out by the contractor for "AREA DRAINAGE " as listed in Schedule ‘A’ Part-VI representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 6.00 Lump sum price worked out by the contractor for "AREA DRAINAGE " as listed in Schedule ‘A’ Part-VI representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 6.00 Lump sum price worked out by the contractor for "AREA DRAINAGE " as listed in Schedule ‘A’ Part-VI representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 6.00 Lump sum price worked out by the contractor for "AREA DRAINAGE " as listed in Schedule ‘A’ Part-VI representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 6.00 Lump sum price worked out by the contractor for "AREA DRAINAGE " as listed in Schedule ‘A’ Part-VI representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 6.00 Lump sum price worked out by the contractor for "AREA DRAINAGE " as listed in Schedule ‘A’ Part-VI representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 6.00 Lump sum price worked out by the contractor for "AREA DRAINAGE " as listed in Schedule ‘A’ Part-VI representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 6.00 Lump sum price worked out by the contractor for "AREA DRAINAGE " as listed in Schedule ‘A’ Part-VI representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 6.00 Lump sum price worked out by the contractor for "AREA DRAINAGE " as listed in Schedule ‘A’ Part-VI representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 6.00 Lump sum price worked out by the contractor for "AREA DRAINAGE " as listed in Schedule ‘A’ Part-VI representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 6.00 Lump sum price worked out by the contractor for "AREA DRAINAGE " as listed in Schedule ‘A’ Part-VI representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 6.00 Lump sum price worked out by the contractor for "AREA DRAINAGE " as listed in Schedule ‘A’ Part-VI representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 6.00 Lump sum price worked out by the contractor for "AREA DRAINAGE " as listed in Schedule ‘A’ Part-VI representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 6.00 Lump sum price worked out by the contractor for "AREA DRAINAGE " as listed in Schedule ‘A’ Part-VI representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 6.00 Lump sum price worked out by the contractor for "AREA DRAINAGE " as listed in Schedule ‘A’ Part-VI representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 6.00 Lump sum price worked out by the contractor for "AREA DRAINAGE " as listed in Schedule ‘A’ Part-VI representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 6.00 Lump sum price worked out by the contractor for "AREA DRAINAGE " as listed in Schedule ‘A’ Part-VI representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 6.00 Lump sum price worked out by the contractor for "AREA DRAINAGE " as listed in Schedule ‘A’ Part-VI representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 6.00 Lump sum price worked out by the contractor for "AREA DRAINAGE " as listed in Schedule ‘A’ Part-VI representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 6.00 0 Lump sum price worked out by the contractor for "AREA DRAINAGE " as listed in Schedule ‘A’ Part-VI representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 6.00 0 -100

1 0 1956222.09 Lump sum price worked out by the contractor for "BOUNDARY WALL, COMPOUND WALL AND GATE " as listed in Schedule ‘A’ Part-VII" representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepri Lump sum price worked out by the contractor for "BOUNDARY WALL, COMPOUND WALL AND GATE " as listed in Schedule ‘A’ Part-VII" representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepri Lump sum price worked out by the contractor for "BOUNDARY WALL, COMPOUND WALL AND GATE " as listed in Schedule ‘A’ Part-VII" representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepri 1 Lump sum price worked out by the contractor for "BOUNDARY WALL, COMPOUND WALL AND GATE " as listed in Schedule ‘A’ Part-VII" representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepri Lump sum price worked out by the contractor for "BOUNDARY WALL, COMPOUND WALL AND GATE " as listed in Schedule ‘A’ Part-VII" representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepri Lump sum price worked out by the contractor for "BOUNDARY WALL, COMPOUND WALL AND GATE " as listed in Schedule ‘A’ Part-VII" representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepri Lump sum price worked out by the contractor for "BOUNDARY WALL, COMPOUND WALL AND GATE " as listed in Schedule ‘A’ Part-VII" representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepri Lump sum price worked out by the contractor for "BOUNDARY WALL, COMPOUND WALL AND GATE " as listed in Schedule ‘A’ Part-VII" representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepri Lump sum price worked out by the contractor for "BOUNDARY WALL, COMPOUND WALL AND GATE " as listed in Schedule ‘A’ Part-VII" representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepri Lump sum price worked out by the contractor for "BOUNDARY WALL, COMPOUND WALL AND GATE " as listed in Schedule ‘A’ Part-VII" representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepri Lump sum price worked out by the contractor for "BOUNDARY WALL, COMPOUND WALL AND GATE " as listed in Schedule ‘A’ Part-VII" representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepri Lump sum price worked out by the contractor for "BOUNDARY WALL, COMPOUND WALL AND GATE " as listed in Schedule ‘A’ Part-VII" representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepri Lump sum price worked out by the contractor for "BOUNDARY WALL, COMPOUND WALL AND GATE " as listed in Schedule ‘A’ Part-VII" representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepri Lump sum price worked out by the contractor for "BOUNDARY WALL, COMPOUND WALL AND GATE " as listed in Schedule ‘A’ Part-VII" representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepri Lump sum price worked out by the contractor for "BOUNDARY WALL, COMPOUND WALL AND GATE " as listed in Schedule ‘A’ Part-VII" representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepri Lump sum price worked out by the contractor for "BOUNDARY WALL, COMPOUND WALL AND GATE " as listed in Schedule ‘A’ Part-VII" representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepri Lump sum price worked out by the contractor for "BOUNDARY WALL, COMPOUND WALL AND GATE " as listed in Schedule ‘A’ Part-VII" representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepri Lump sum price worked out by the contractor for "BOUNDARY WALL, COMPOUND WALL AND GATE " as listed in Schedule ‘A’ Part-VII" representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepri Lump sum price worked out by the contractor for "BOUNDARY WALL, COMPOUND WALL AND GATE " as listed in Schedule ‘A’ Part-VII" representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepri Lump sum price worked out by the contractor for "BOUNDARY WALL, COMPOUND WALL AND GATE " as listed in Schedule ‘A’ Part-VII" representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepri Lump sum price worked out by the contractor for "BOUNDARY WALL, COMPOUND WALL AND GATE " as listed in Schedule ‘A’ Part-VII" representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepri Lump sum price worked out by the contractor for "BOUNDARY WALL, COMPOUND WALL AND GATE " as listed in Schedule ‘A’ Part-VII" representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepri Lump sum price worked out by the contractor for "BOUNDARY WALL, COMPOUND WALL AND GATE " as listed in Schedule ‘A’ Part-VII" representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepri Lump sum price worked out by the contractor for "BOUNDARY WALL, COMPOUND WALL AND GATE " as listed in Schedule ‘A’ Part-VII" representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepri Lump sum price worked out by the contractor for "BOUNDARY WALL, COMPOUND WALL AND GATE " as listed in Schedule ‘A’ Part-VII" representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepri Lump sum price worked out by the contractor for "BOUNDARY WALL, COMPOUND WALL AND GATE " as listed in Schedule ‘A’ Part-VII" representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepri Lump sum price worked out by the contractor for "BOUNDARY WALL, COMPOUND WALL AND GATE " as listed in Schedule ‘A’ Part-VII" representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepri Lump sum price worked out by the contractor for "BOUNDARY WALL, COMPOUND WALL AND GATE " as listed in Schedule ‘A’ Part-VII" representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepri Lump sum price worked out by the contractor for "BOUNDARY WALL, COMPOUND WALL AND GATE " as listed in Schedule ‘A’ Part-VII" representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepri Lump sum price worked out by the contractor for "BOUNDARY WALL, COMPOUND WALL AND GATE " as listed in Schedule ‘A’ Part-VII" representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepri Lump sum price worked out by the contractor for "BOUNDARY WALL, COMPOUND WALL AND GATE " as listed in Schedule ‘A’ Part-VII" representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepri Lump sum price worked out by the contractor for "BOUNDARY WALL, COMPOUND WALL AND GATE " as listed in Schedule ‘A’ Part-VII" representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepri Lump sum price worked out by the contractor for "BOUNDARY WALL, COMPOUND WALL AND GATE " as listed in Schedule ‘A’ Part-VII" representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepri Lump sum price worked out by the contractor for "BOUNDARY WALL, COMPOUND WALL AND GATE " as listed in Schedule ‘A’ Part-VII" representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepri Lump sum price worked out by the contractor for "BOUNDARY WALL, COMPOUND WALL AND GATE " as listed in Schedule ‘A’ Part-VII" representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepri Lump sum price worked out by the contractor for "BOUNDARY WALL, COMPOUND WALL AND GATE " as listed in Schedule ‘A’ Part-VII" representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepri Lump sum price worked out by the contractor for "BOUNDARY WALL, COMPOUND WALL AND GATE " as listed in Schedule ‘A’ Part-VII" representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepri Lump sum price worked out by the contractor for "BOUNDARY WALL, COMPOUND WALL AND GATE " as listed in Schedule ‘A’ Part-VII" representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepri Lump sum price worked out by the contractor for "BOUNDARY WALL, COMPOUND WALL AND GATE " as listed in Schedule ‘A’ Part-VII" representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepri Lump sum price worked out by the contractor for "BOUNDARY WALL, COMPOUND WALL AND GATE " as listed in Schedule ‘A’ Part-VII" representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepri Lump sum price worked out by the contractor for "BOUNDARY WALL, COMPOUND WALL AND GATE " as listed in Schedule ‘A’ Part-VII" representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepri Lump sum price worked out by the contractor for "BOUNDARY WALL, COMPOUND WALL AND GATE " as listed in Schedule ‘A’ Part-VII" representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepri Lump sum price worked out by the contractor for "BOUNDARY WALL, COMPOUND WALL AND GATE " as listed in Schedule ‘A’ Part-VII" representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepri Lump sum price worked out by the contractor for "BOUNDARY WALL, COMPOUND WALL AND GATE " as listed in Schedule ‘A’ Part-VII" representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepri 0 Lump sum price worked out by the contractor for "BOUNDARY WALL, COMPOUND WALL AND GATE " as listed in Schedule ‘A’ Part-VII" representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepri 0 -100

1 0 600397.12 Lump sum price worked out by the contractor for "RAIN WATER HARVESTING " as listed in Schedule ‘A’ Part-VIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the ME Lump sum price worked out by the contractor for "RAIN WATER HARVESTING " as listed in Schedule ‘A’ Part-VIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the ME Lump sum price worked out by the contractor for "RAIN WATER HARVESTING " as listed in Schedule ‘A’ Part-VIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the ME 1 Lump sum price worked out by the contractor for "RAIN WATER HARVESTING " as listed in Schedule ‘A’ Part-VIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the ME Lump sum price worked out by the contractor for "RAIN WATER HARVESTING " as listed in Schedule ‘A’ Part-VIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the ME Lump sum price worked out by the contractor for "RAIN WATER HARVESTING " as listed in Schedule ‘A’ Part-VIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the ME Lump sum price worked out by the contractor for "RAIN WATER HARVESTING " as listed in Schedule ‘A’ Part-VIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the ME Lump sum price worked out by the contractor for "RAIN WATER HARVESTING " as listed in Schedule ‘A’ Part-VIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the ME Lump sum price worked out by the contractor for "RAIN WATER HARVESTING " as listed in Schedule ‘A’ Part-VIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the ME Lump sum price worked out by the contractor for "RAIN WATER HARVESTING " as listed in Schedule ‘A’ Part-VIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the ME Lump sum price worked out by the contractor for "RAIN WATER HARVESTING " as listed in Schedule ‘A’ Part-VIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the ME Lump sum price worked out by the contractor for "RAIN WATER HARVESTING " as listed in Schedule ‘A’ Part-VIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the ME Lump sum price worked out by the contractor for "RAIN WATER HARVESTING " as listed in Schedule ‘A’ Part-VIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the ME Lump sum price worked out by the contractor for "RAIN WATER HARVESTING " as listed in Schedule ‘A’ Part-VIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the ME Lump sum price worked out by the contractor for "RAIN WATER HARVESTING " as listed in Schedule ‘A’ Part-VIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the ME Lump sum price worked out by the contractor for "RAIN WATER HARVESTING " as listed in Schedule ‘A’ Part-VIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the ME Lump sum price worked out by the contractor for "RAIN WATER HARVESTING " as listed in Schedule ‘A’ Part-VIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the ME Lump sum price worked out by the contractor for "RAIN WATER HARVESTING " as listed in Schedule ‘A’ Part-VIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the ME Lump sum price worked out by the contractor for "RAIN WATER HARVESTING " as listed in Schedule ‘A’ Part-VIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the ME Lump sum price worked out by the contractor for "RAIN WATER HARVESTING " as listed in Schedule ‘A’ Part-VIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the ME Lump sum price worked out by the contractor for "RAIN WATER HARVESTING " as listed in Schedule ‘A’ Part-VIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the ME Lump sum price worked out by the contractor for "RAIN WATER HARVESTING " as listed in Schedule ‘A’ Part-VIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the ME Lump sum price worked out by the contractor for "RAIN WATER HARVESTING " as listed in Schedule ‘A’ Part-VIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the ME Lump sum price worked out by the contractor for "RAIN WATER HARVESTING " as listed in Schedule ‘A’ Part-VIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the ME Lump sum price worked out by the contractor for "RAIN WATER HARVESTING " as listed in Schedule ‘A’ Part-VIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the ME Lump sum price worked out by the contractor for "RAIN WATER HARVESTING " as listed in Schedule ‘A’ Part-VIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the ME Lump sum price worked out by the contractor for "RAIN WATER HARVESTING " as listed in Schedule ‘A’ Part-VIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the ME Lump sum price worked out by the contractor for "RAIN WATER HARVESTING " as listed in Schedule ‘A’ Part-VIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the ME Lump sum price worked out by the contractor for "RAIN WATER HARVESTING " as listed in Schedule ‘A’ Part-VIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the ME Lump sum price worked out by the contractor for "RAIN WATER HARVESTING " as listed in Schedule ‘A’ Part-VIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the ME Lump sum price worked out by the contractor for "RAIN WATER HARVESTING " as listed in Schedule ‘A’ Part-VIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the ME Lump sum price worked out by the contractor for "RAIN WATER HARVESTING " as listed in Schedule ‘A’ Part-VIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the ME Lump sum price worked out by the contractor for "RAIN WATER HARVESTING " as listed in Schedule ‘A’ Part-VIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the ME Lump sum price worked out by the contractor for "RAIN WATER HARVESTING " as listed in Schedule ‘A’ Part-VIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the ME Lump sum price worked out by the contractor for "RAIN WATER HARVESTING " as listed in Schedule ‘A’ Part-VIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the ME Lump sum price worked out by the contractor for "RAIN WATER HARVESTING " as listed in Schedule ‘A’ Part-VIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the ME Lump sum price worked out by the contractor for "RAIN WATER HARVESTING " as listed in Schedule ‘A’ Part-VIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the ME Lump sum price worked out by the contractor for "RAIN WATER HARVESTING " as listed in Schedule ‘A’ Part-VIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the ME Lump sum price worked out by the contractor for "RAIN WATER HARVESTING " as listed in Schedule ‘A’ Part-VIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the ME Lump sum price worked out by the contractor for "RAIN WATER HARVESTING " as listed in Schedule ‘A’ Part-VIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the ME Lump sum price worked out by the contractor for "RAIN WATER HARVESTING " as listed in Schedule ‘A’ Part-VIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the ME Lump sum price worked out by the contractor for "RAIN WATER HARVESTING " as listed in Schedule ‘A’ Part-VIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the ME Lump sum price worked out by the contractor for "RAIN WATER HARVESTING " as listed in Schedule ‘A’ Part-VIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the ME Lump sum price worked out by the contractor for "RAIN WATER HARVESTING " as listed in Schedule ‘A’ Part-VIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the ME 0 Lump sum price worked out by the contractor for "RAIN WATER HARVESTING " as listed in Schedule ‘A’ Part-VIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the ME 0 -100

1 0 31434.68 Lump sum price worked out by the contractor for "EXTERNAL WATER SUPPLY" as listed in Schedule ‘A’ Part-IX representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES Lump sum price worked out by the contractor for "EXTERNAL WATER SUPPLY" as listed in Schedule ‘A’ Part-IX representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES Lump sum price worked out by the contractor for "EXTERNAL WATER SUPPLY" as listed in Schedule ‘A’ Part-IX representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES 1 Lump sum price worked out by the contractor for "EXTERNAL WATER SUPPLY" as listed in Schedule ‘A’ Part-IX representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES Lump sum price worked out by the contractor for "EXTERNAL WATER SUPPLY" as listed in Schedule ‘A’ Part-IX representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES Lump sum price worked out by the contractor for "EXTERNAL WATER SUPPLY" as listed in Schedule ‘A’ Part-IX representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES Lump sum price worked out by the contractor for "EXTERNAL WATER SUPPLY" as listed in Schedule ‘A’ Part-IX representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES Lump sum price worked out by the contractor for "EXTERNAL WATER SUPPLY" as listed in Schedule ‘A’ Part-IX representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES Lump sum price worked out by the contractor for "EXTERNAL WATER SUPPLY" as listed in Schedule ‘A’ Part-IX representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES Lump sum price worked out by the contractor for "EXTERNAL WATER SUPPLY" as listed in Schedule ‘A’ Part-IX representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES Lump sum price worked out by the contractor for "EXTERNAL WATER SUPPLY" as listed in Schedule ‘A’ Part-IX representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES Lump sum price worked out by the contractor for "EXTERNAL WATER SUPPLY" as listed in Schedule ‘A’ Part-IX representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES Lump sum price worked out by the contractor for "EXTERNAL WATER SUPPLY" as listed in Schedule ‘A’ Part-IX representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES Lump sum price worked out by the contractor for "EXTERNAL WATER SUPPLY" as listed in Schedule ‘A’ Part-IX representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES Lump sum price worked out by the contractor for "EXTERNAL WATER SUPPLY" as listed in Schedule ‘A’ Part-IX representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES Lump sum price worked out by the contractor for "EXTERNAL WATER SUPPLY" as listed in Schedule ‘A’ Part-IX representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES Lump sum price worked out by the contractor for "EXTERNAL WATER SUPPLY" as listed in Schedule ‘A’ Part-IX representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES Lump sum price worked out by the contractor for "EXTERNAL WATER SUPPLY" as listed in Schedule ‘A’ Part-IX representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES Lump sum price worked out by the contractor for "EXTERNAL WATER SUPPLY" as listed in Schedule ‘A’ Part-IX representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES Lump sum price worked out by the contractor for "EXTERNAL WATER SUPPLY" as listed in Schedule ‘A’ Part-IX representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES Lump sum price worked out by the contractor for "EXTERNAL WATER SUPPLY" as listed in Schedule ‘A’ Part-IX representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES Lump sum price worked out by the contractor for "EXTERNAL WATER SUPPLY" as listed in Schedule ‘A’ Part-IX representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES Lump sum price worked out by the contractor for "EXTERNAL WATER SUPPLY" as listed in Schedule ‘A’ Part-IX representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES Lump sum price worked out by the contractor for "EXTERNAL WATER SUPPLY" as listed in Schedule ‘A’ Part-IX representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES Lump sum price worked out by the contractor for "EXTERNAL WATER SUPPLY" as listed in Schedule ‘A’ Part-IX representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES Lump sum price worked out by the contractor for "EXTERNAL WATER SUPPLY" as listed in Schedule ‘A’ Part-IX representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES Lump sum price worked out by the contractor for "EXTERNAL WATER SUPPLY" as listed in Schedule ‘A’ Part-IX representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES Lump sum price worked out by the contractor for "EXTERNAL WATER SUPPLY" as listed in Schedule ‘A’ Part-IX representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES Lump sum price worked out by the contractor for "EXTERNAL WATER SUPPLY" as listed in Schedule ‘A’ Part-IX representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES Lump sum price worked out by the contractor for "EXTERNAL WATER SUPPLY" as listed in Schedule ‘A’ Part-IX representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES Lump sum price worked out by the contractor for "EXTERNAL WATER SUPPLY" as listed in Schedule ‘A’ Part-IX representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES Lump sum price worked out by the contractor for "EXTERNAL WATER SUPPLY" as listed in Schedule ‘A’ Part-IX representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES Lump sum price worked out by the contractor for "EXTERNAL WATER SUPPLY" as listed in Schedule ‘A’ Part-IX representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES Lump sum price worked out by the contractor for "EXTERNAL WATER SUPPLY" as listed in Schedule ‘A’ Part-IX representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES Lump sum price worked out by the contractor for "EXTERNAL WATER SUPPLY" as listed in Schedule ‘A’ Part-IX representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES Lump sum price worked out by the contractor for "EXTERNAL WATER SUPPLY" as listed in Schedule ‘A’ Part-IX representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES Lump sum price worked out by the contractor for "EXTERNAL WATER SUPPLY" as listed in Schedule ‘A’ Part-IX representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES Lump sum price worked out by the contractor for "EXTERNAL WATER SUPPLY" as listed in Schedule ‘A’ Part-IX representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES Lump sum price worked out by the contractor for "EXTERNAL WATER SUPPLY" as listed in Schedule ‘A’ Part-IX representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES Lump sum price worked out by the contractor for "EXTERNAL WATER SUPPLY" as listed in Schedule ‘A’ Part-IX representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES Lump sum price worked out by the contractor for "EXTERNAL WATER SUPPLY" as listed in Schedule ‘A’ Part-IX representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES Lump sum price worked out by the contractor for "EXTERNAL WATER SUPPLY" as listed in Schedule ‘A’ Part-IX representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES Lump sum price worked out by the contractor for "EXTERNAL WATER SUPPLY" as listed in Schedule ‘A’ Part-IX representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES Lump sum price worked out by the contractor for "EXTERNAL WATER SUPPLY" as listed in Schedule ‘A’ Part-IX representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES 0 Lump sum price worked out by the contractor for "EXTERNAL WATER SUPPLY" as listed in Schedule ‘A’ Part-IX representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES 0 -100

1 0 57777.6 Lump sum price worked out by the contractor for "EXTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-X representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES Lump sum price worked out by the contractor for "EXTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-X representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES Lump sum price worked out by the contractor for "EXTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-X representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES 1 Lump sum price worked out by the contractor for "EXTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-X representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES Lump sum price worked out by the contractor for "EXTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-X representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES Lump sum price worked out by the contractor for "EXTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-X representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES Lump sum price worked out by the contractor for "EXTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-X representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES Lump sum price worked out by the contractor for "EXTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-X representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES Lump sum price worked out by the contractor for "EXTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-X representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES Lump sum price worked out by the contractor for "EXTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-X representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES Lump sum price worked out by the contractor for "EXTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-X representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES Lump sum price worked out by the contractor for "EXTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-X representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES Lump sum price worked out by the contractor for "EXTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-X representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES Lump sum price worked out by the contractor for "EXTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-X representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES Lump sum price worked out by the contractor for "EXTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-X representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES Lump sum price worked out by the contractor for "EXTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-X representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES Lump sum price worked out by the contractor for "EXTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-X representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES Lump sum price worked out by the contractor for "EXTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-X representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES Lump sum price worked out by the contractor for "EXTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-X representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES Lump sum price worked out by the contractor for "EXTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-X representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES Lump sum price worked out by the contractor for "EXTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-X representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES Lump sum price worked out by the contractor for "EXTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-X representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES Lump sum price worked out by the contractor for "EXTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-X representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES Lump sum price worked out by the contractor for "EXTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-X representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES Lump sum price worked out by the contractor for "EXTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-X representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES Lump sum price worked out by the contractor for "EXTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-X representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES Lump sum price worked out by the contractor for "EXTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-X representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES Lump sum price worked out by the contractor for "EXTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-X representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES Lump sum price worked out by the contractor for "EXTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-X representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES Lump sum price worked out by the contractor for "EXTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-X representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES Lump sum price worked out by the contractor for "EXTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-X representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES Lump sum price worked out by the contractor for "EXTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-X representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES Lump sum price worked out by the contractor for "EXTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-X representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES Lump sum price worked out by the contractor for "EXTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-X representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES Lump sum price worked out by the contractor for "EXTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-X representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES Lump sum price worked out by the contractor for "EXTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-X representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES Lump sum price worked out by the contractor for "EXTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-X representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES Lump sum price worked out by the contractor for "EXTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-X representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES Lump sum price worked out by the contractor for "EXTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-X representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES Lump sum price worked out by the contractor for "EXTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-X representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES Lump sum price worked out by the contractor for "EXTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-X representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES Lump sum price worked out by the contractor for "EXTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-X representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES Lump sum price worked out by the contractor for "EXTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-X representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES Lump sum price worked out by the contractor for "EXTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-X representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES 0 Lump sum price worked out by the contractor for "EXTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-X representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES 0 -100

1 0 7646528.96 Lump sum price worked out by the contractor for " SUMMER APPLIANCES" as listed in Schedule ‘A’ Part-XII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 12.00 Lump sum price worked out by the contractor for " SUMMER APPLIANCES" as listed in Schedule ‘A’ Part-XII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 12.00 Lump sum price worked out by the contractor for " SUMMER APPLIANCES" as listed in Schedule ‘A’ Part-XII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 12.00 1 Lump sum price worked out by the contractor for " SUMMER APPLIANCES" as listed in Schedule ‘A’ Part-XII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 12.00 Lump sum price worked out by the contractor for " SUMMER APPLIANCES" as listed in Schedule ‘A’ Part-XII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 12.00 Lump sum price worked out by the contractor for " SUMMER APPLIANCES" as listed in Schedule ‘A’ Part-XII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 12.00 Lump sum price worked out by the contractor for " SUMMER APPLIANCES" as listed in Schedule ‘A’ Part-XII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 12.00 Lump sum price worked out by the contractor for " SUMMER APPLIANCES" as listed in Schedule ‘A’ Part-XII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 12.00 Lump sum price worked out by the contractor for " SUMMER APPLIANCES" as listed in Schedule ‘A’ Part-XII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 12.00 Lump sum price worked out by the contractor for " SUMMER APPLIANCES" as listed in Schedule ‘A’ Part-XII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 12.00 Lump sum price worked out by the contractor for " SUMMER APPLIANCES" as listed in Schedule ‘A’ Part-XII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 12.00 Lump sum price worked out by the contractor for " SUMMER APPLIANCES" as listed in Schedule ‘A’ Part-XII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 12.00 Lump sum price worked out by the contractor for " SUMMER APPLIANCES" as listed in Schedule ‘A’ Part-XII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 12.00 Lump sum price worked out by the contractor for " SUMMER APPLIANCES" as listed in Schedule ‘A’ Part-XII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 12.00 Lump sum price worked out by the contractor for " SUMMER APPLIANCES" as listed in Schedule ‘A’ Part-XII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 12.00 Lump sum price worked out by the contractor for " SUMMER APPLIANCES" as listed in Schedule ‘A’ Part-XII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 12.00 Lump sum price worked out by the contractor for " SUMMER APPLIANCES" as listed in Schedule ‘A’ Part-XII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 12.00 Lump sum price worked out by the contractor for " SUMMER APPLIANCES" as listed in Schedule ‘A’ Part-XII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 12.00 Lump sum price worked out by the contractor for " SUMMER APPLIANCES" as listed in Schedule ‘A’ Part-XII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 12.00 Lump sum price worked out by the contractor for " SUMMER APPLIANCES" as listed in Schedule ‘A’ Part-XII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 12.00 Lump sum price worked out by the contractor for " SUMMER APPLIANCES" as listed in Schedule ‘A’ Part-XII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 12.00 Lump sum price worked out by the contractor for " SUMMER APPLIANCES" as listed in Schedule ‘A’ Part-XII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 12.00 Lump sum price worked out by the contractor for " SUMMER APPLIANCES" as listed in Schedule ‘A’ Part-XII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 12.00 Lump sum price worked out by the contractor for " SUMMER APPLIANCES" as listed in Schedule ‘A’ Part-XII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 12.00 Lump sum price worked out by the contractor for " SUMMER APPLIANCES" as listed in Schedule ‘A’ Part-XII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 12.00 Lump sum price worked out by the contractor for " SUMMER APPLIANCES" as listed in Schedule ‘A’ Part-XII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 12.00 Lump sum price worked out by the contractor for " SUMMER APPLIANCES" as listed in Schedule ‘A’ Part-XII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 12.00 Lump sum price worked out by the contractor for " SUMMER APPLIANCES" as listed in Schedule ‘A’ Part-XII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 12.00 Lump sum price worked out by the contractor for " SUMMER APPLIANCES" as listed in Schedule ‘A’ Part-XII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 12.00 Lump sum price worked out by the contractor for " SUMMER APPLIANCES" as listed in Schedule ‘A’ Part-XII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 12.00 Lump sum price worked out by the contractor for " SUMMER APPLIANCES" as listed in Schedule ‘A’ Part-XII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 12.00 Lump sum price worked out by the contractor for " SUMMER APPLIANCES" as listed in Schedule ‘A’ Part-XII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 12.00 Lump sum price worked out by the contractor for " SUMMER APPLIANCES" as listed in Schedule ‘A’ Part-XII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 12.00 Lump sum price worked out by the contractor for " SUMMER APPLIANCES" as listed in Schedule ‘A’ Part-XII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 12.00 Lump sum price worked out by the contractor for " SUMMER APPLIANCES" as listed in Schedule ‘A’ Part-XII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 12.00 Lump sum price worked out by the contractor for " SUMMER APPLIANCES" as listed in Schedule ‘A’ Part-XII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 12.00 Lump sum price worked out by the contractor for " SUMMER APPLIANCES" as listed in Schedule ‘A’ Part-XII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 12.00 Lump sum price worked out by the contractor for " SUMMER APPLIANCES" as listed in Schedule ‘A’ Part-XII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 12.00 Lump sum price worked out by the contractor for " SUMMER APPLIANCES" as listed in Schedule ‘A’ Part-XII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 12.00 Lump sum price worked out by the contractor for " SUMMER APPLIANCES" as listed in Schedule ‘A’ Part-XII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 12.00 Lump sum price worked out by the contractor for " SUMMER APPLIANCES" as listed in Schedule ‘A’ Part-XII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 12.00 Lump sum price worked out by the contractor for " SUMMER APPLIANCES" as listed in Schedule ‘A’ Part-XII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 12.00 Lump sum price worked out by the contractor for " SUMMER APPLIANCES" as listed in Schedule ‘A’ Part-XII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 12.00 Lump sum price worked out by the contractor for " SUMMER APPLIANCES" as listed in Schedule ‘A’ Part-XII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 12.00 0 Lump sum price worked out by the contractor for " SUMMER APPLIANCES" as listed in Schedule ‘A’ Part-XII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 12.00 0 -100

Lump sum price worked out by the contractor for " HOT WATER SUPPLY " as listed in Schedule ‘A’ Part-XIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 13.00 Lump sum price worked out by the contractor for " HOT WATER SUPPLY " as listed in Schedule ‘A’ Part-XIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 13.00 Lump sum price worked out by the contractor for " HOT WATER SUPPLY " as listed in Schedule ‘A’ Part-XIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 13.00 Lump sum price worked out by the contractor for " HOT WATER SUPPLY " as listed in Schedule ‘A’ Part-XIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 13.00 Lump sum price worked out by the contractor for " HOT WATER SUPPLY " as listed in Schedule ‘A’ Part-XIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 13.00 Lump sum price worked out by the contractor for " HOT WATER SUPPLY " as listed in Schedule ‘A’ Part-XIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 13.00 Lump sum price worked out by the contractor for " HOT WATER SUPPLY " as listed in Schedule ‘A’ Part-XIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 13.00 Lump sum price worked out by the contractor for " HOT WATER SUPPLY " as listed in Schedule ‘A’ Part-XIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 13.00 Lump sum price worked out by the contractor for " HOT WATER SUPPLY " as listed in Schedule ‘A’ Part-XIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 13.00 Lump sum price worked out by the contractor for " HOT WATER SUPPLY " as listed in Schedule ‘A’ Part-XIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 13.00 Lump sum price worked out by the contractor for " HOT WATER SUPPLY " as listed in Schedule ‘A’ Part-XIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 13.00 Lump sum price worked out by the contractor for " HOT WATER SUPPLY " as listed in Schedule ‘A’ Part-XIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 13.00 Lump sum price worked out by the contractor for " HOT WATER SUPPLY " as listed in Schedule ‘A’ Part-XIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 13.00 Lump sum price worked out by the contractor for " HOT WATER SUPPLY " as listed in Schedule ‘A’ Part-XIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 13.00 Lump sum price worked out by the contractor for " HOT WATER SUPPLY " as listed in Schedule ‘A’ Part-XIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 13.00 Lump sum price worked out by the contractor for " HOT WATER SUPPLY " as listed in Schedule ‘A’ Part-XIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 13.00 Lump sum price worked out by the contractor for " HOT WATER SUPPLY " as listed in Schedule ‘A’ Part-XIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 13.00 Lump sum price worked out by the contractor for " HOT WATER SUPPLY " as listed in Schedule ‘A’ Part-XIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 13.00 Lump sum price worked out by the contractor for " HOT WATER SUPPLY " as listed in Schedule ‘A’ Part-XIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 13.00 Lump sum price worked out by the contractor for " HOT WATER SUPPLY " as listed in Schedule ‘A’ Part-XIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 13.00 Lump sum price worked out by the contractor for " HOT WATER SUPPLY " as listed in Schedule ‘A’ Part-XIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 13.00 Lump sum price worked out by the contractor for " HOT WATER SUPPLY " as listed in Schedule ‘A’ Part-XIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 13.00 Lump sum price worked out by the contractor for " HOT WATER SUPPLY " as listed in Schedule ‘A’ Part-XIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 13.00 Lump sum price worked out by the contractor for " HOT WATER SUPPLY " as listed in Schedule ‘A’ Part-XIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 13.00 Lump sum price worked out by the contractor for " HOT WATER SUPPLY " as listed in Schedule ‘A’ Part-XIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 13.00 Lump sum price worked out by the contractor for " HOT WATER SUPPLY " as listed in Schedule ‘A’ Part-XIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 13.00 Lump sum price worked out by the contractor for " HOT WATER SUPPLY " as listed in Schedule ‘A’ Part-XIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 13.00 Lump sum price worked out by the contractor for " HOT WATER SUPPLY " as listed in Schedule ‘A’ Part-XIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 13.00 Lump sum price worked out by the contractor for " HOT WATER SUPPLY " as listed in Schedule ‘A’ Part-XIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 13.00 Lump sum price worked out by the contractor for " HOT WATER SUPPLY " as listed in Schedule ‘A’ Part-XIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 13.00 Lump sum price worked out by the contractor for " HOT WATER SUPPLY " as listed in Schedule ‘A’ Part-XIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 13.00 Lump sum price worked out by the contractor for " HOT WATER SUPPLY " as listed in Schedule ‘A’ Part-XIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 13.00 Lump sum price worked out by the contractor for " HOT WATER SUPPLY " as listed in Schedule ‘A’ Part-XIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 13.00 Lump sum price worked out by the contractor for " HOT WATER SUPPLY " as listed in Schedule ‘A’ Part-XIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 13.00 Lump sum price worked out by the contractor for " HOT WATER SUPPLY " as listed in Schedule ‘A’ Part-XIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 13.00 Lump sum price worked out by the contractor for " HOT WATER SUPPLY " as listed in Schedule ‘A’ Part-XIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 13.00 Lump sum price worked out by the contractor for " HOT WATER SUPPLY " as listed in Schedule ‘A’ Part-XIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 13.00 Lump sum price worked out by the contractor for " HOT WATER SUPPLY " as listed in Schedule ‘A’ Part-XIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 13.00 Lump sum price worked out by the contractor for " HOT WATER SUPPLY " as listed in Schedule ‘A’ Part-XIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 13.00 Lump sum price worked out by the contractor for " HOT WATER SUPPLY " as listed in Schedule ‘A’ Part-XIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 13.00 Lump sum price worked out by the contractor for " HOT WATER SUPPLY " as listed in Schedule ‘A’ Part-XIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 13.00 Lump sum price worked out by the contractor for " HOT WATER SUPPLY " as listed in Schedule ‘A’ Part-XIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 13.00 Lump sum price worked out by the contractor for " HOT WATER SUPPLY " as listed in Schedule ‘A’ Part-XIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 13.00 Lump sum price worked out by the contractor for " HOT WATER SUPPLY " as listed in Schedule ‘A’ Part-XIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 13.00 Lump sum price worked out by the contractor for " HOT WATER SUPPLY " as listed in Schedule ‘A’ Part-XIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 13.00

Lump sum price worked out by the contractor for "AIR CONDITIONING " as listed in Schedule ‘A’ Part-XIV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 14.00 Lump sum price worked out by the contractor for "AIR CONDITIONING " as listed in Schedule ‘A’ Part-XIV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 14.00 Lump sum price worked out by the contractor for "AIR CONDITIONING " as listed in Schedule ‘A’ Part-XIV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 14.00 Lump sum price worked out by the contractor for "AIR CONDITIONING " as listed in Schedule ‘A’ Part-XIV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 14.00 Lump sum price worked out by the contractor for "AIR CONDITIONING " as listed in Schedule ‘A’ Part-XIV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 14.00 Lump sum price worked out by the contractor for "AIR CONDITIONING " as listed in Schedule ‘A’ Part-XIV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 14.00 Lump sum price worked out by the contractor for "AIR CONDITIONING " as listed in Schedule ‘A’ Part-XIV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 14.00 Lump sum price worked out by the contractor for "AIR CONDITIONING " as listed in Schedule ‘A’ Part-XIV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 14.00 Lump sum price worked out by the contractor for "AIR CONDITIONING " as listed in Schedule ‘A’ Part-XIV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 14.00 Lump sum price worked out by the contractor for "AIR CONDITIONING " as listed in Schedule ‘A’ Part-XIV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 14.00 Lump sum price worked out by the contractor for "AIR CONDITIONING " as listed in Schedule ‘A’ Part-XIV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 14.00 Lump sum price worked out by the contractor for "AIR CONDITIONING " as listed in Schedule ‘A’ Part-XIV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 14.00 Lump sum price worked out by the contractor for "AIR CONDITIONING " as listed in Schedule ‘A’ Part-XIV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 14.00 Lump sum price worked out by the contractor for "AIR CONDITIONING " as listed in Schedule ‘A’ Part-XIV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 14.00 Lump sum price worked out by the contractor for "AIR CONDITIONING " as listed in Schedule ‘A’ Part-XIV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 14.00 Lump sum price worked out by the contractor for "AIR CONDITIONING " as listed in Schedule ‘A’ Part-XIV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 14.00 Lump sum price worked out by the contractor for "AIR CONDITIONING " as listed in Schedule ‘A’ Part-XIV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 14.00 Lump sum price worked out by the contractor for "AIR CONDITIONING " as listed in Schedule ‘A’ Part-XIV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 14.00 Lump sum price worked out by the contractor for "AIR CONDITIONING " as listed in Schedule ‘A’ Part-XIV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 14.00 Lump sum price worked out by the contractor for "AIR CONDITIONING " as listed in Schedule ‘A’ Part-XIV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 14.00 Lump sum price worked out by the contractor for "AIR CONDITIONING " as listed in Schedule ‘A’ Part-XIV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 14.00 Lump sum price worked out by the contractor for "AIR CONDITIONING " as listed in Schedule ‘A’ Part-XIV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 14.00 Lump sum price worked out by the contractor for "AIR CONDITIONING " as listed in Schedule ‘A’ Part-XIV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 14.00 Lump sum price worked out by the contractor for "AIR CONDITIONING " as listed in Schedule ‘A’ Part-XIV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 14.00 Lump sum price worked out by the contractor for "AIR CONDITIONING " as listed in Schedule ‘A’ Part-XIV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 14.00 Lump sum price worked out by the contractor for "AIR CONDITIONING " as listed in Schedule ‘A’ Part-XIV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 14.00 Lump sum price worked out by the contractor for "AIR CONDITIONING " as listed in Schedule ‘A’ Part-XIV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 14.00 Lump sum price worked out by the contractor for "AIR CONDITIONING " as listed in Schedule ‘A’ Part-XIV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 14.00 Lump sum price worked out by the contractor for "AIR CONDITIONING " as listed in Schedule ‘A’ Part-XIV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 14.00 Lump sum price worked out by the contractor for "AIR CONDITIONING " as listed in Schedule ‘A’ Part-XIV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 14.00 Lump sum price worked out by the contractor for "AIR CONDITIONING " as listed in Schedule ‘A’ Part-XIV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 14.00 Lump sum price worked out by the contractor for "AIR CONDITIONING " as listed in Schedule ‘A’ Part-XIV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 14.00 Lump sum price worked out by the contractor for "AIR CONDITIONING " as listed in Schedule ‘A’ Part-XIV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 14.00 Lump sum price worked out by the contractor for "AIR CONDITIONING " as listed in Schedule ‘A’ Part-XIV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 14.00 Lump sum price worked out by the contractor for "AIR CONDITIONING " as listed in Schedule ‘A’ Part-XIV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 14.00 Lump sum price worked out by the contractor for "AIR CONDITIONING " as listed in Schedule ‘A’ Part-XIV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 14.00 Lump sum price worked out by the contractor for "AIR CONDITIONING " as listed in Schedule ‘A’ Part-XIV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 14.00 Lump sum price worked out by the contractor for "AIR CONDITIONING " as listed in Schedule ‘A’ Part-XIV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 14.00 Lump sum price worked out by the contractor for "AIR CONDITIONING " as listed in Schedule ‘A’ Part-XIV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 14.00 Lump sum price worked out by the contractor for "AIR CONDITIONING " as listed in Schedule ‘A’ Part-XIV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 14.00 Lump sum price worked out by the contractor for "AIR CONDITIONING " as listed in Schedule ‘A’ Part-XIV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 14.00 Lump sum price worked out by the contractor for "AIR CONDITIONING " as listed in Schedule ‘A’ Part-XIV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 14.00 Lump sum price worked out by the contractor for "AIR CONDITIONING " as listed in Schedule ‘A’ Part-XIV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 14.00 Lump sum price worked out by the contractor for "AIR CONDITIONING " as listed in Schedule ‘A’ Part-XIV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 14.00 Lump sum price worked out by the contractor for "AIR CONDITIONING " as listed in Schedule ‘A’ Part-XIV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 14.00

6 0 Lump sum price worked out by the contractor for "SITE CLEARANCE, SITE DEVELOPMENT AND EARTH WORK" as listed in Schedule ‘A’ Part-XV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price Lump sum price worked out by the contractor for "SITE CLEARANCE, SITE DEVELOPMENT AND EARTH WORK" as listed in Schedule ‘A’ Part-XV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price Lump sum price worked out by the contractor for "SITE CLEARANCE, SITE DEVELOPMENT AND EARTH WORK" as listed in Schedule ‘A’ Part-XV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price 1 Lump sum price worked out by the contractor for "SITE CLEARANCE, SITE DEVELOPMENT AND EARTH WORK" as listed in Schedule ‘A’ Part-XV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price Lump sum price worked out by the contractor for "SITE CLEARANCE, SITE DEVELOPMENT AND EARTH WORK" as listed in Schedule ‘A’ Part-XV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price Lump sum price worked out by the contractor for "SITE CLEARANCE, SITE DEVELOPMENT AND EARTH WORK" as listed in Schedule ‘A’ Part-XV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price Lump sum price worked out by the contractor for "SITE CLEARANCE, SITE DEVELOPMENT AND EARTH WORK" as listed in Schedule ‘A’ Part-XV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price Lump sum price worked out by the contractor for "SITE CLEARANCE, SITE DEVELOPMENT AND EARTH WORK" as listed in Schedule ‘A’ Part-XV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price Lump sum price worked out by the contractor for "SITE CLEARANCE, SITE DEVELOPMENT AND EARTH WORK" as listed in Schedule ‘A’ Part-XV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price Lump sum price worked out by the contractor for "SITE CLEARANCE, SITE DEVELOPMENT AND EARTH WORK" as listed in Schedule ‘A’ Part-XV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price Lump sum price worked out by the contractor for "SITE CLEARANCE, SITE DEVELOPMENT AND EARTH WORK" as listed in Schedule ‘A’ Part-XV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price Lump sum price worked out by the contractor for "SITE CLEARANCE, SITE DEVELOPMENT AND EARTH WORK" as listed in Schedule ‘A’ Part-XV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price Lump sum price worked out by the contractor for "SITE CLEARANCE, SITE DEVELOPMENT AND EARTH WORK" as listed in Schedule ‘A’ Part-XV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price Lump sum price worked out by the contractor for "SITE CLEARANCE, SITE DEVELOPMENT AND EARTH WORK" as listed in Schedule ‘A’ Part-XV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price Lump sum price worked out by the contractor for "SITE CLEARANCE, SITE DEVELOPMENT AND EARTH WORK" as listed in Schedule ‘A’ Part-XV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price Lump sum price worked out by the contractor for "SITE CLEARANCE, SITE DEVELOPMENT AND EARTH WORK" as listed in Schedule ‘A’ Part-XV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price Lump sum price worked out by the contractor for "SITE CLEARANCE, SITE DEVELOPMENT AND EARTH WORK" as listed in Schedule ‘A’ Part-XV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price Lump sum price worked out by the contractor for "SITE CLEARANCE, SITE DEVELOPMENT AND EARTH WORK" as listed in Schedule ‘A’ Part-XV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price Lump sum price worked out by the contractor for "SITE CLEARANCE, SITE DEVELOPMENT AND EARTH WORK" as listed in Schedule ‘A’ Part-XV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price Lump sum price worked out by the contractor for "SITE CLEARANCE, SITE DEVELOPMENT AND EARTH WORK" as listed in Schedule ‘A’ Part-XV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price Lump sum price worked out by the contractor for "SITE CLEARANCE, SITE DEVELOPMENT AND EARTH WORK" as listed in Schedule ‘A’ Part-XV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price Lump sum price worked out by the contractor for "SITE CLEARANCE, SITE DEVELOPMENT AND EARTH WORK" as listed in Schedule ‘A’ Part-XV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price Lump sum price worked out by the contractor for "SITE CLEARANCE, SITE DEVELOPMENT AND EARTH WORK" as listed in Schedule ‘A’ Part-XV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price Lump sum price worked out by the contractor for "SITE CLEARANCE, SITE DEVELOPMENT AND EARTH WORK" as listed in Schedule ‘A’ Part-XV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price Lump sum price worked out by the contractor for "SITE CLEARANCE, SITE DEVELOPMENT AND EARTH WORK" as listed in Schedule ‘A’ Part-XV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price Lump sum price worked out by the contractor for "SITE CLEARANCE, SITE DEVELOPMENT AND EARTH WORK" as listed in Schedule ‘A’ Part-XV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price Lump sum price worked out by the contractor for "SITE CLEARANCE, SITE DEVELOPMENT AND EARTH WORK" as listed in Schedule ‘A’ Part-XV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price Lump sum price worked out by the contractor for "SITE CLEARANCE, SITE DEVELOPMENT AND EARTH WORK" as listed in Schedule ‘A’ Part-XV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price Lump sum price worked out by the contractor for "SITE CLEARANCE, SITE DEVELOPMENT AND EARTH WORK" as listed in Schedule ‘A’ Part-XV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price Lump sum price worked out by the contractor for "SITE CLEARANCE, SITE DEVELOPMENT AND EARTH WORK" as listed in Schedule ‘A’ Part-XV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price Lump sum price worked out by the contractor for "SITE CLEARANCE, SITE DEVELOPMENT AND EARTH WORK" as listed in Schedule ‘A’ Part-XV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price Lump sum price worked out by the contractor for "SITE CLEARANCE, SITE DEVELOPMENT AND EARTH WORK" as listed in Schedule ‘A’ Part-XV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price Lump sum price worked out by the contractor for "SITE CLEARANCE, SITE DEVELOPMENT AND EARTH WORK" as listed in Schedule ‘A’ Part-XV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price Lump sum price worked out by the contractor for "SITE CLEARANCE, SITE DEVELOPMENT AND EARTH WORK" as listed in Schedule ‘A’ Part-XV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price Lump sum price worked out by the contractor for "SITE CLEARANCE, SITE DEVELOPMENT AND EARTH WORK" as listed in Schedule ‘A’ Part-XV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price Lump sum price worked out by the contractor for "SITE CLEARANCE, SITE DEVELOPMENT AND EARTH WORK" as listed in Schedule ‘A’ Part-XV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price Lump sum price worked out by the contractor for "SITE CLEARANCE, SITE DEVELOPMENT AND EARTH WORK" as listed in Schedule ‘A’ Part-XV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price Lump sum price worked out by the contractor for "SITE CLEARANCE, SITE DEVELOPMENT AND EARTH WORK" as listed in Schedule ‘A’ Part-XV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price Lump sum price worked out by the contractor for "SITE CLEARANCE, SITE DEVELOPMENT AND EARTH WORK" as listed in Schedule ‘A’ Part-XV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price Lump sum price worked out by the contractor for "SITE CLEARANCE, SITE DEVELOPMENT AND EARTH WORK" as listed in Schedule ‘A’ Part-XV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price Lump sum price worked out by the contractor for "SITE CLEARANCE, SITE DEVELOPMENT AND EARTH WORK" as listed in Schedule ‘A’ Part-XV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price Lump sum price worked out by the contractor for "SITE CLEARANCE, SITE DEVELOPMENT AND EARTH WORK" as listed in Schedule ‘A’ Part-XV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price Lump sum price worked out by the contractor for "SITE CLEARANCE, SITE DEVELOPMENT AND EARTH WORK" as listed in Schedule ‘A’ Part-XV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price Lump sum price worked out by the contractor for "SITE CLEARANCE, SITE DEVELOPMENT AND EARTH WORK" as listed in Schedule ‘A’ Part-XV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price 0 Lump sum price worked out by the contractor for "SITE CLEARANCE, SITE DEVELOPMENT AND EARTH WORK" as listed in Schedule ‘A’ Part-XV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price 0

21 0 Sch 'A' Part-XVI MISC ITEMS (TO BE QUOTED BY CONTRACTOR) Notes: (i) This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under column 5 signifies this fact only. (ii) Excavation and earth work except for the items wh Sch 'A' Part-XVI MISC ITEMS (TO BE QUOTED BY CONTRACTOR) Notes: (i) This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under column 5 signifies this fact only. (ii) Excavation and earth work except for the items wh Sch 'A' Part-XVI MISC ITEMS (TO BE QUOTED BY CONTRACTOR) Notes: (i) This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under column 5 signifies this fact only. (ii) Excavation and earth work except for the items wh 1 Sch 'A' Part-XVI MISC ITEMS (TO BE QUOTED BY CONTRACTOR) Notes: (i) This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under column 5 signifies this fact only. (ii) Excavation and earth work except for the items wh Sch 'A' Part-XVI MISC ITEMS (TO BE QUOTED BY CONTRACTOR) Notes: (i) This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under column 5 signifies this fact only. (ii) Excavation and earth work except for the items wh Sch 'A' Part-XVI MISC ITEMS (TO BE QUOTED BY CONTRACTOR) Notes: (i) This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under column 5 signifies this fact only. (ii) Excavation and earth work except for the items wh Sch 'A' Part-XVI MISC ITEMS (TO BE QUOTED BY CONTRACTOR) Notes: (i) This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under column 5 signifies this fact only. (ii) Excavation and earth work except for the items wh Sch 'A' Part-XVI MISC ITEMS (TO BE QUOTED BY CONTRACTOR) Notes: (i) This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under column 5 signifies this fact only. (ii) Excavation and earth work except for the items wh Sch 'A' Part-XVI MISC ITEMS (TO BE QUOTED BY CONTRACTOR) Notes: (i) This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under column 5 signifies this fact only. (ii) Excavation and earth work except for the items wh Sch 'A' Part-XVI MISC ITEMS (TO BE QUOTED BY CONTRACTOR) Notes: (i) This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under column 5 signifies this fact only. (ii) Excavation and earth work except for the items wh Sch 'A' Part-XVI MISC ITEMS (TO BE QUOTED BY CONTRACTOR) Notes: (i) This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under column 5 signifies this fact only. (ii) Excavation and earth work except for the items wh Sch 'A' Part-XVI MISC ITEMS (TO BE QUOTED BY CONTRACTOR) Notes: (i) This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under column 5 signifies this fact only. (ii) Excavation and earth work except for the items wh Sch 'A' Part-XVI MISC ITEMS (TO BE QUOTED BY CONTRACTOR) Notes: (i) This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under column 5 signifies this fact only. (ii) Excavation and earth work except for the items wh Sch 'A' Part-XVI MISC ITEMS (TO BE QUOTED BY CONTRACTOR) Notes: (i) This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under column 5 signifies this fact only. (ii) Excavation and earth work except for the items wh Sch 'A' Part-XVI MISC ITEMS (TO BE QUOTED BY CONTRACTOR) Notes: (i) This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under column 5 signifies this fact only. (ii) Excavation and earth work except for the items wh Sch 'A' Part-XVI MISC ITEMS (TO BE QUOTED BY CONTRACTOR) Notes: (i) This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under column 5 signifies this fact only. (ii) Excavation and earth work except for the items wh Sch 'A' Part-XVI MISC ITEMS (TO BE QUOTED BY CONTRACTOR) Notes: (i) This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under column 5 signifies this fact only. (ii) Excavation and earth work except for the items wh Sch 'A' Part-XVI MISC ITEMS (TO BE QUOTED BY CONTRACTOR) Notes: (i) This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under column 5 signifies this fact only. (ii) Excavation and earth work except for the items wh Sch 'A' Part-XVI MISC ITEMS (TO BE QUOTED BY CONTRACTOR) Notes: (i) This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under column 5 signifies this fact only. (ii) Excavation and earth work except for the items wh Sch 'A' Part-XVI MISC ITEMS (TO BE QUOTED BY CONTRACTOR) Notes: (i) This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under column 5 signifies this fact only. (ii) Excavation and earth work except for the items wh Sch 'A' Part-XVI MISC ITEMS (TO BE QUOTED BY CONTRACTOR) Notes: (i) This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under column 5 signifies this fact only. (ii) Excavation and earth work except for the items wh Sch 'A' Part-XVI MISC ITEMS (TO BE QUOTED BY CONTRACTOR) Notes: (i) This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under column 5 signifies this fact only. (ii) Excavation and earth work except for the items wh Sch 'A' Part-XVI MISC ITEMS (TO BE QUOTED BY CONTRACTOR) Notes: (i) This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under column 5 signifies this fact only. (ii) Excavation and earth work except for the items wh Sch 'A' Part-XVI MISC ITEMS (TO BE QUOTED BY CONTRACTOR) Notes: (i) This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under column 5 signifies this fact only. (ii) Excavation and earth work except for the items wh Sch 'A' Part-XVI MISC ITEMS (TO BE QUOTED BY CONTRACTOR) Notes: (i) This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under column 5 signifies this fact only. (ii) Excavation and earth work except for the items wh Sch 'A' Part-XVI MISC ITEMS (TO BE QUOTED BY CONTRACTOR) Notes: (i) This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under column 5 signifies this fact only. (ii) Excavation and earth work except for the items wh Sch 'A' Part-XVI MISC ITEMS (TO BE QUOTED BY CONTRACTOR) Notes: (i) This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under column 5 signifies this fact only. (ii) Excavation and earth work except for the items wh Sch 'A' Part-XVI MISC ITEMS (TO BE QUOTED BY CONTRACTOR) Notes: (i) This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under column 5 signifies this fact only. (ii) Excavation and earth work except for the items wh Sch 'A' Part-XVI MISC ITEMS (TO BE QUOTED BY CONTRACTOR) Notes: (i) This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under column 5 signifies this fact only. (ii) Excavation and earth work except for the items wh Sch 'A' Part-XVI MISC ITEMS (TO BE QUOTED BY CONTRACTOR) Notes: (i) This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under column 5 signifies this fact only. (ii) Excavation and earth work except for the items wh Sch 'A' Part-XVI MISC ITEMS (TO BE QUOTED BY CONTRACTOR) Notes: (i) This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under column 5 signifies this fact only. (ii) Excavation and earth work except for the items wh Sch 'A' Part-XVI MISC ITEMS (TO BE QUOTED BY CONTRACTOR) Notes: (i) This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under column 5 signifies this fact only. (ii) Excavation and earth work except for the items wh Sch 'A' Part-XVI MISC ITEMS (TO BE QUOTED BY CONTRACTOR) Notes: (i) This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under column 5 signifies this fact only. (ii) Excavation and earth work except for the items wh Sch 'A' Part-XVI MISC ITEMS (TO BE QUOTED BY CONTRACTOR) Notes: (i) This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under column 5 signifies this fact only. (ii) Excavation and earth work except for the items wh Sch 'A' Part-XVI MISC ITEMS (TO BE QUOTED BY CONTRACTOR) Notes: (i) This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under column 5 signifies this fact only. (ii) Excavation and earth work except for the items wh Sch 'A' Part-XVI MISC ITEMS (TO BE QUOTED BY CONTRACTOR) Notes: (i) This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under column 5 signifies this fact only. (ii) Excavation and earth work except for the items wh Sch 'A' Part-XVI MISC ITEMS (TO BE QUOTED BY CONTRACTOR) Notes: (i) This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under column 5 signifies this fact only. (ii) Excavation and earth work except for the items wh Sch 'A' Part-XVI MISC ITEMS (TO BE QUOTED BY CONTRACTOR) Notes: (i) This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under column 5 signifies this fact only. (ii) Excavation and earth work except for the items wh Sch 'A' Part-XVI MISC ITEMS (TO BE QUOTED BY CONTRACTOR) Notes: (i) This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under column 5 signifies this fact only. (ii) Excavation and earth work except for the items wh Sch 'A' Part-XVI MISC ITEMS (TO BE QUOTED BY CONTRACTOR) Notes: (i) This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under column 5 signifies this fact only. (ii) Excavation and earth work except for the items wh Sch 'A' Part-XVI MISC ITEMS (TO BE QUOTED BY CONTRACTOR) Notes: (i) This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under column 5 signifies this fact only. (ii) Excavation and earth work except for the items wh Sch 'A' Part-XVI MISC ITEMS (TO BE QUOTED BY CONTRACTOR) Notes: (i) This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under column 5 signifies this fact only. (ii) Excavation and earth work except for the items wh Sch 'A' Part-XVI MISC ITEMS (TO BE QUOTED BY CONTRACTOR) Notes: (i) This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under column 5 signifies this fact only. (ii) Excavation and earth work except for the items wh Sch 'A' Part-XVI MISC ITEMS (TO BE QUOTED BY CONTRACTOR) Notes: (i) This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under column 5 signifies this fact only. (ii) Excavation and earth work except for the items wh 0 Sch 'A' Part-XVI MISC ITEMS (TO BE QUOTED BY CONTRACTOR) Notes: (i) This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under column 5 signifies this fact only. (ii) Excavation and earth work except for the items wh 0

50 0 INTERNAL ELECTRIC SUPPLY 18.00 INTERNAL ELECTRIC SUPPLY 18.00 INTERNAL ELECTRIC SUPPLY 18.00 1 INTERNAL ELECTRIC SUPPLY 18.00 INTERNAL ELECTRIC SUPPLY 18.00 INTERNAL ELECTRIC SUPPLY 18.00 INTERNAL ELECTRIC SUPPLY 18.00 INTERNAL ELECTRIC SUPPLY 18.00 INTERNAL ELECTRIC SUPPLY 18.00 INTERNAL ELECTRIC SUPPLY 18.00 INTERNAL ELECTRIC SUPPLY 18.00 INTERNAL ELECTRIC SUPPLY 18.00 INTERNAL ELECTRIC SUPPLY 18.00 INTERNAL ELECTRIC SUPPLY 18.00 INTERNAL ELECTRIC SUPPLY 18.00 INTERNAL ELECTRIC SUPPLY 18.00 INTERNAL ELECTRIC SUPPLY 18.00 INTERNAL ELECTRIC SUPPLY 18.00 INTERNAL ELECTRIC SUPPLY 18.00 INTERNAL ELECTRIC SUPPLY 18.00 INTERNAL ELECTRIC SUPPLY 18.00 INTERNAL ELECTRIC SUPPLY 18.00 INTERNAL ELECTRIC SUPPLY 18.00 INTERNAL ELECTRIC SUPPLY 18.00 INTERNAL ELECTRIC SUPPLY 18.00 INTERNAL ELECTRIC SUPPLY 18.00 INTERNAL ELECTRIC SUPPLY 18.00 INTERNAL ELECTRIC SUPPLY 18.00 INTERNAL ELECTRIC SUPPLY 18.00 INTERNAL ELECTRIC SUPPLY 18.00 INTERNAL ELECTRIC SUPPLY 18.00 INTERNAL ELECTRIC SUPPLY 18.00 INTERNAL ELECTRIC SUPPLY 18.00 INTERNAL ELECTRIC SUPPLY 18.00 INTERNAL ELECTRIC SUPPLY 18.00 INTERNAL ELECTRIC SUPPLY 18.00 INTERNAL ELECTRIC SUPPLY 18.00 INTERNAL ELECTRIC SUPPLY 18.00 INTERNAL ELECTRIC SUPPLY 18.00 INTERNAL ELECTRIC SUPPLY 18.00 INTERNAL ELECTRIC SUPPLY 18.00 INTERNAL ELECTRIC SUPPLY 18.00 INTERNAL ELECTRIC SUPPLY 18.00 INTERNAL ELECTRIC SUPPLY 18.00 0 INTERNAL ELECTRIC SUPPLY 18.00 0

66 0 S&F of TV socket 1 module 230 volts AC make Havells and Equivalent complete all as specified and directed by Engr-in-Charge. 18.01 S&F of TV socket 1 module 230 volts AC make Havells and Equivalent complete all as specified and directed by Engr-in-Charge. 18.01 S&F of TV socket 1 module 230 volts AC make Havells and Equivalent complete all as specified and directed by Engr-in-Charge. 18.01 1 S&F of TV socket 1 module 230 volts AC make Havells and Equivalent complete all as specified and directed by Engr-in-Charge. 18.01 S&F of TV socket 1 module 230 volts AC make Havells and Equivalent complete all as specified and directed by Engr-in-Charge. 18.01 S&F of TV socket 1 module 230 volts AC make Havells and Equivalent complete all as specified and directed by Engr-in-Charge. 18.01 S&F of TV socket 1 module 230 volts AC make Havells and Equivalent complete all as specified and directed by Engr-in-Charge. 18.01 S&F of TV socket 1 module 230 volts AC make Havells and Equivalent complete all as specified and directed by Engr-in-Charge. 18.01 S&F of TV socket 1 module 230 volts AC make Havells and Equivalent complete all as specified and directed by Engr-in-Charge. 18.01 S&F of TV socket 1 module 230 volts AC make Havells and Equivalent complete all as specified and directed by Engr-in-Charge. 18.01 S&F of TV socket 1 module 230 volts AC make Havells and Equivalent complete all as specified and directed by Engr-in-Charge. 18.01 S&F of TV socket 1 module 230 volts AC make Havells and Equivalent complete all as specified and directed by Engr-in-Charge. 18.01 S&F of TV socket 1 module 230 volts AC make Havells and Equivalent complete all as specified and directed by Engr-in-Charge. 18.01 S&F of TV socket 1 module 230 volts AC make Havells and Equivalent complete all as specified and directed by Engr-in-Charge. 18.01 S&F of TV socket 1 module 230 volts AC make Havells and Equivalent complete all as specified and directed by Engr-in-Charge. 18.01 S&F of TV socket 1 module 230 volts AC make Havells and Equivalent complete all as specified and directed by Engr-in-Charge. 18.01 S&F of TV socket 1 module 230 volts AC make Havells and Equivalent complete all as specified and directed by Engr-in-Charge. 18.01 S&F of TV socket 1 module 230 volts AC make Havells and Equivalent complete all as specified and directed by Engr-in-Charge. 18.01 S&F of TV socket 1 module 230 volts AC make Havells and Equivalent complete all as specified and directed by Engr-in-Charge. 18.01 S&F of TV socket 1 module 230 volts AC make Havells and Equivalent complete all as specified and directed by Engr-in-Charge. 18.01 S&F of TV socket 1 module 230 volts AC make Havells and Equivalent complete all as specified and directed by Engr-in-Charge. 18.01 S&F of TV socket 1 module 230 volts AC make Havells and Equivalent complete all as specified and directed by Engr-in-Charge. 18.01 S&F of TV socket 1 module 230 volts AC make Havells and Equivalent complete all as specified and directed by Engr-in-Charge. 18.01 S&F of TV socket 1 module 230 volts AC make Havells and Equivalent complete all as specified and directed by Engr-in-Charge. 18.01 S&F of TV socket 1 module 230 volts AC make Havells and Equivalent complete all as specified and directed by Engr-in-Charge. 18.01 S&F of TV socket 1 module 230 volts AC make Havells and Equivalent complete all as specified and directed by Engr-in-Charge. 18.01 S&F of TV socket 1 module 230 volts AC make Havells and Equivalent complete all as specified and directed by Engr-in-Charge. 18.01 S&F of TV socket 1 module 230 volts AC make Havells and Equivalent complete all as specified and directed by Engr-in-Charge. 18.01 S&F of TV socket 1 module 230 volts AC make Havells and Equivalent complete all as specified and directed by Engr-in-Charge. 18.01 S&F of TV socket 1 module 230 volts AC make Havells and Equivalent complete all as specified and directed by Engr-in-Charge. 18.01 S&F of TV socket 1 module 230 volts AC make Havells and Equivalent complete all as specified and directed by Engr-in-Charge. 18.01 S&F of TV socket 1 module 230 volts AC make Havells and Equivalent complete all as specified and directed by Engr-in-Charge. 18.01 S&F of TV socket 1 module 230 volts AC make Havells and Equivalent complete all as specified and directed by Engr-in-Charge. 18.01 S&F of TV socket 1 module 230 volts AC make Havells and Equivalent complete all as specified and directed by Engr-in-Charge. 18.01 S&F of TV socket 1 module 230 volts AC make Havells and Equivalent complete all as specified and directed by Engr-in-Charge. 18.01 S&F of TV socket 1 module 230 volts AC make Havells and Equivalent complete all as specified and directed by Engr-in-Charge. 18.01 S&F of TV socket 1 module 230 volts AC make Havells and Equivalent complete all as specified and directed by Engr-in-Charge. 18.01 S&F of TV socket 1 module 230 volts AC make Havells and Equivalent complete all as specified and directed by Engr-in-Charge. 18.01 S&F of TV socket 1 module 230 volts AC make Havells and Equivalent complete all as specified and directed by Engr-in-Charge. 18.01 S&F of TV socket 1 module 230 volts AC make Havells and Equivalent complete all as specified and directed by Engr-in-Charge. 18.01 S&F of TV socket 1 module 230 volts AC make Havells and Equivalent complete all as specified and directed by Engr-in-Charge. 18.01 S&F of TV socket 1 module 230 volts AC make Havells and Equivalent complete all as specified and directed by Engr-in-Charge. 18.01 S&F of TV socket 1 module 230 volts AC make Havells and Equivalent complete all as specified and directed by Engr-in-Charge. 18.01 S&F of TV socket 1 module 230 volts AC make Havells and Equivalent complete all as specified and directed by Engr-in-Charge. 18.01 0 S&F of TV socket 1 module 230 volts AC make Havells and Equivalent complete all as specified and directed by Engr-in-Charge. 18.01 0

18 0 Supply and install, testing wall termination Telephone socket RJ-11all as specified and directed by Engr in Charge. 18.02 Supply and install, testing wall termination Telephone socket RJ-11all as specified and directed by Engr in Charge. 18.02 Supply and install, testing wall termination Telephone socket RJ-11all as specified and directed by Engr in Charge. 18.02 1 Supply and install, testing wall termination Telephone socket RJ-11all as specified and directed by Engr in Charge. 18.02 Supply and install, testing wall termination Telephone socket RJ-11all as specified and directed by Engr in Charge. 18.02 Supply and install, testing wall termination Telephone socket RJ-11all as specified and directed by Engr in Charge. 18.02 Supply and install, testing wall termination Telephone socket RJ-11all as specified and directed by Engr in Charge. 18.02 Supply and install, testing wall termination Telephone socket RJ-11all as specified and directed by Engr in Charge. 18.02 Supply and install, testing wall termination Telephone socket RJ-11all as specified and directed by Engr in Charge. 18.02 Supply and install, testing wall termination Telephone socket RJ-11all as specified and directed by Engr in Charge. 18.02 Supply and install, testing wall termination Telephone socket RJ-11all as specified and directed by Engr in Charge. 18.02 Supply and install, testing wall termination Telephone socket RJ-11all as specified and directed by Engr in Charge. 18.02 Supply and install, testing wall termination Telephone socket RJ-11all as specified and directed by Engr in Charge. 18.02 Supply and install, testing wall termination Telephone socket RJ-11all as specified and directed by Engr in Charge. 18.02 Supply and install, testing wall termination Telephone socket RJ-11all as specified and directed by Engr in Charge. 18.02 Supply and install, testing wall termination Telephone socket RJ-11all as specified and directed by Engr in Charge. 18.02 Supply and install, testing wall termination Telephone socket RJ-11all as specified and directed by Engr in Charge. 18.02 Supply and install, testing wall termination Telephone socket RJ-11all as specified and directed by Engr in Charge. 18.02 Supply and install, testing wall termination Telephone socket RJ-11all as specified and directed by Engr in Charge. 18.02 Supply and install, testing wall termination Telephone socket RJ-11all as specified and directed by Engr in Charge. 18.02 Supply and install, testing wall termination Telephone socket RJ-11all as specified and directed by Engr in Charge. 18.02 Supply and install, testing wall termination Telephone socket RJ-11all as specified and directed by Engr in Charge. 18.02 Supply and install, testing wall termination Telephone socket RJ-11all as specified and directed by Engr in Charge. 18.02 Supply and install, testing wall termination Telephone socket RJ-11all as specified and directed by Engr in Charge. 18.02 Supply and install, testing wall termination Telephone socket RJ-11all as specified and directed by Engr in Charge. 18.02 Supply and install, testing wall termination Telephone socket RJ-11all as specified and directed by Engr in Charge. 18.02 Supply and install, testing wall termination Telephone socket RJ-11all as specified and directed by Engr in Charge. 18.02 Supply and install, testing wall termination Telephone socket RJ-11all as specified and directed by Engr in Charge. 18.02 Supply and install, testing wall termination Telephone socket RJ-11all as specified and directed by Engr in Charge. 18.02 Supply and install, testing wall termination Telephone socket RJ-11all as specified and directed by Engr in Charge. 18.02 Supply and install, testing wall termination Telephone socket RJ-11all as specified and directed by Engr in Charge. 18.02 Supply and install, testing wall termination Telephone socket RJ-11all as specified and directed by Engr in Charge. 18.02 Supply and install, testing wall termination Telephone socket RJ-11all as specified and directed by Engr in Charge. 18.02 Supply and install, testing wall termination Telephone socket RJ-11all as specified and directed by Engr in Charge. 18.02 Supply and install, testing wall termination Telephone socket RJ-11all as specified and directed by Engr in Charge. 18.02 Supply and install, testing wall termination Telephone socket RJ-11all as specified and directed by Engr in Charge. 18.02 Supply and install, testing wall termination Telephone socket RJ-11all as specified and directed by Engr in Charge. 18.02 Supply and install, testing wall termination Telephone socket RJ-11all as specified and directed by Engr in Charge. 18.02 Supply and install, testing wall termination Telephone socket RJ-11all as specified and directed by Engr in Charge. 18.02 Supply and install, testing wall termination Telephone socket RJ-11all as specified and directed by Engr in Charge. 18.02 Supply and install, testing wall termination Telephone socket RJ-11all as specified and directed by Engr in Charge. 18.02 Supply and install, testing wall termination Telephone socket RJ-11all as specified and directed by Engr in Charge. 18.02 Supply and install, testing wall termination Telephone socket RJ-11all as specified and directed by Engr in Charge. 18.02 Supply and install, testing wall termination Telephone socket RJ-11all as specified and directed by Engr in Charge. 18.02 0 Supply and install, testing wall termination Telephone socket RJ-11all as specified and directed by Engr in Charge. 18.02 0

5 0 S&F blanking plates make Havells and Equivalent complete all as specified and directed. 18.03 S&F blanking plates make Havells and Equivalent complete all as specified and directed. 18.03 S&F blanking plates make Havells and Equivalent complete all as specified and directed. 18.03 1 S&F blanking plates make Havells and Equivalent complete all as specified and directed. 18.03 S&F blanking plates make Havells and Equivalent complete all as specified and directed. 18.03 S&F blanking plates make Havells and Equivalent complete all as specified and directed. 18.03 S&F blanking plates make Havells and Equivalent complete all as specified and directed. 18.03 S&F blanking plates make Havells and Equivalent complete all as specified and directed. 18.03 S&F blanking plates make Havells and Equivalent complete all as specified and directed. 18.03 S&F blanking plates make Havells and Equivalent complete all as specified and directed. 18.03 S&F blanking plates make Havells and Equivalent complete all as specified and directed. 18.03 S&F blanking plates make Havells and Equivalent complete all as specified and directed. 18.03 S&F blanking plates make Havells and Equivalent complete all as specified and directed. 18.03 S&F blanking plates make Havells and Equivalent complete all as specified and directed. 18.03 S&F blanking plates make Havells and Equivalent complete all as specified and directed. 18.03 S&F blanking plates make Havells and Equivalent complete all as specified and directed. 18.03 S&F blanking plates make Havells and Equivalent complete all as specified and directed. 18.03 S&F blanking plates make Havells and Equivalent complete all as specified and directed. 18.03 S&F blanking plates make Havells and Equivalent complete all as specified and directed. 18.03 S&F blanking plates make Havells and Equivalent complete all as specified and directed. 18.03 S&F blanking plates make Havells and Equivalent complete all as specified and directed. 18.03 S&F blanking plates make Havells and Equivalent complete all as specified and directed. 18.03 S&F blanking plates make Havells and Equivalent complete all as specified and directed. 18.03 S&F blanking plates make Havells and Equivalent complete all as specified and directed. 18.03 S&F blanking plates make Havells and Equivalent complete all as specified and directed. 18.03 S&F blanking plates make Havells and Equivalent complete all as specified and directed. 18.03 S&F blanking plates make Havells and Equivalent complete all as specified and directed. 18.03 S&F blanking plates make Havells and Equivalent complete all as specified and directed. 18.03 S&F blanking plates make Havells and Equivalent complete all as specified and directed. 18.03 S&F blanking plates make Havells and Equivalent complete all as specified and directed. 18.03 S&F blanking plates make Havells and Equivalent complete all as specified and directed. 18.03 S&F blanking plates make Havells and Equivalent complete all as specified and directed. 18.03 S&F blanking plates make Havells and Equivalent complete all as specified and directed. 18.03 S&F blanking plates make Havells and Equivalent complete all as specified and directed. 18.03 S&F blanking plates make Havells and Equivalent complete all as specified and directed. 18.03 S&F blanking plates make Havells and Equivalent complete all as specified and directed. 18.03 S&F blanking plates make Havells and Equivalent complete all as specified and directed. 18.03 S&F blanking plates make Havells and Equivalent complete all as specified and directed. 18.03 S&F blanking plates make Havells and Equivalent complete all as specified and directed. 18.03 S&F blanking plates make Havells and Equivalent complete all as specified and directed. 18.03 S&F blanking plates make Havells and Equivalent complete all as specified and directed. 18.03 S&F blanking plates make Havells and Equivalent complete all as specified and directed. 18.03 S&F blanking plates make Havells and Equivalent complete all as specified and directed. 18.03 S&F blanking plates make Havells and Equivalent complete all as specified and directed. 18.03 0 S&F blanking plates make Havells and Equivalent complete all as specified and directed. 18.03 0

6 0 S&F of lamp holder, including 9 watt LED Bulb insulated body with back plate suitable for batten fittings and complete all as specified and directed. 18.04 S&F of lamp holder, including 9 watt LED Bulb insulated body with back plate suitable for batten fittings and complete all as specified and directed. 18.04 S&F of lamp holder, including 9 watt LED Bulb insulated body with back plate suitable for batten fittings and complete all as specified and directed. 18.04 1 S&F of lamp holder, including 9 watt LED Bulb insulated body with back plate suitable for batten fittings and complete all as specified and directed. 18.04 S&F of lamp holder, including 9 watt LED Bulb insulated body with back plate suitable for batten fittings and complete all as specified and directed. 18.04 S&F of lamp holder, including 9 watt LED Bulb insulated body with back plate suitable for batten fittings and complete all as specified and directed. 18.04 S&F of lamp holder, including 9 watt LED Bulb insulated body with back plate suitable for batten fittings and complete all as specified and directed. 18.04 S&F of lamp holder, including 9 watt LED Bulb insulated body with back plate suitable for batten fittings and complete all as specified and directed. 18.04 S&F of lamp holder, including 9 watt LED Bulb insulated body with back plate suitable for batten fittings and complete all as specified and directed. 18.04 S&F of lamp holder, including 9 watt LED Bulb insulated body with back plate suitable for batten fittings and complete all as specified and directed. 18.04 S&F of lamp holder, including 9 watt LED Bulb insulated body with back plate suitable for batten fittings and complete all as specified and directed. 18.04 S&F of lamp holder, including 9 watt LED Bulb insulated body with back plate suitable for batten fittings and complete all as specified and directed. 18.04 S&F of lamp holder, including 9 watt LED Bulb insulated body with back plate suitable for batten fittings and complete all as specified and directed. 18.04 S&F of lamp holder, including 9 watt LED Bulb insulated body with back plate suitable for batten fittings and complete all as specified and directed. 18.04 S&F of lamp holder, including 9 watt LED Bulb insulated body with back plate suitable for batten fittings and complete all as specified and directed. 18.04 S&F of lamp holder, including 9 watt LED Bulb insulated body with back plate suitable for batten fittings and complete all as specified and directed. 18.04 S&F of lamp holder, including 9 watt LED Bulb insulated body with back plate suitable for batten fittings and complete all as specified and directed. 18.04 S&F of lamp holder, including 9 watt LED Bulb insulated body with back plate suitable for batten fittings and complete all as specified and directed. 18.04 S&F of lamp holder, including 9 watt LED Bulb insulated body with back plate suitable for batten fittings and complete all as specified and directed. 18.04 S&F of lamp holder, including 9 watt LED Bulb insulated body with back plate suitable for batten fittings and complete all as specified and directed. 18.04 S&F of lamp holder, including 9 watt LED Bulb insulated body with back plate suitable for batten fittings and complete all as specified and directed. 18.04 S&F of lamp holder, including 9 watt LED Bulb insulated body with back plate suitable for batten fittings and complete all as specified and directed. 18.04 S&F of lamp holder, including 9 watt LED Bulb insulated body with back plate suitable for batten fittings and complete all as specified and directed. 18.04 S&F of lamp holder, including 9 watt LED Bulb insulated body with back plate suitable for batten fittings and complete all as specified and directed. 18.04 S&F of lamp holder, including 9 watt LED Bulb insulated body with back plate suitable for batten fittings and complete all as specified and directed. 18.04 S&F of lamp holder, including 9 watt LED Bulb insulated body with back plate suitable for batten fittings and complete all as specified and directed. 18.04 S&F of lamp holder, including 9 watt LED Bulb insulated body with back plate suitable for batten fittings and complete all as specified and directed. 18.04 S&F of lamp holder, including 9 watt LED Bulb insulated body with back plate suitable for batten fittings and complete all as specified and directed. 18.04 S&F of lamp holder, including 9 watt LED Bulb insulated body with back plate suitable for batten fittings and complete all as specified and directed. 18.04 S&F of lamp holder, including 9 watt LED Bulb insulated body with back plate suitable for batten fittings and complete all as specified and directed. 18.04 S&F of lamp holder, including 9 watt LED Bulb insulated body with back plate suitable for batten fittings and complete all as specified and directed. 18.04 S&F of lamp holder, including 9 watt LED Bulb insulated body with back plate suitable for batten fittings and complete all as specified and directed. 18.04 S&F of lamp holder, including 9 watt LED Bulb insulated body with back plate suitable for batten fittings and complete all as specified and directed. 18.04 S&F of lamp holder, including 9 watt LED Bulb insulated body with back plate suitable for batten fittings and complete all as specified and directed. 18.04 S&F of lamp holder, including 9 watt LED Bulb insulated body with back plate suitable for batten fittings and complete all as specified and directed. 18.04 S&F of lamp holder, including 9 watt LED Bulb insulated body with back plate suitable for batten fittings and complete all as specified and directed. 18.04 S&F of lamp holder, including 9 watt LED Bulb insulated body with back plate suitable for batten fittings and complete all as specified and directed. 18.04 S&F of lamp holder, including 9 watt LED Bulb insulated body with back plate suitable for batten fittings and complete all as specified and directed. 18.04 S&F of lamp holder, including 9 watt LED Bulb insulated body with back plate suitable for batten fittings and complete all as specified and directed. 18.04 S&F of lamp holder, including 9 watt LED Bulb insulated body with back plate suitable for batten fittings and complete all as specified and directed. 18.04 S&F of lamp holder, including 9 watt LED Bulb insulated body with back plate suitable for batten fittings and complete all as specified and directed. 18.04 S&F of lamp holder, including 9 watt LED Bulb insulated body with back plate suitable for batten fittings and complete all as specified and directed. 18.04 S&F of lamp holder, including 9 watt LED Bulb insulated body with back plate suitable for batten fittings and complete all as specified and directed. 18.04 S&F of lamp holder, including 9 watt LED Bulb insulated body with back plate suitable for batten fittings and complete all as specified and directed. 18.04 0 S&F of lamp holder, including 9 watt LED Bulb insulated body with back plate suitable for batten fittings and complete all as specified and directed. 18.04 0

6 0 S & F LED bed side reading light fitting white/black powder coated housing with movable string, metalic base,complete with driver to operate on 240V AC 50 Hz, suitable for indoor application. Make Bajaj, Havells, HPL,Shakti Fixture and complete all as spe S & F LED bed side reading light fitting white/black powder coated housing with movable string, metalic base,complete with driver to operate on 240V AC 50 Hz, suitable for indoor application. Make Bajaj, Havells, HPL,Shakti Fixture and complete all as spe S & F LED bed side reading light fitting white/black powder coated housing with movable string, metalic base,complete with driver to operate on 240V AC 50 Hz, suitable for indoor application. Make Bajaj, Havells, HPL,Shakti Fixture and complete all as spe 1 S & F LED bed side reading light fitting white/black powder coated housing with movable string, metalic base,complete with driver to operate on 240V AC 50 Hz, suitable for indoor application. Make Bajaj, Havells, HPL,Shakti Fixture and complete all as spe S & F LED bed side reading light fitting white/black powder coated housing with movable string, metalic base,complete with driver to operate on 240V AC 50 Hz, suitable for indoor application. Make Bajaj, Havells, HPL,Shakti Fixture and complete all as spe S & F LED bed side reading light fitting white/black powder coated housing with movable string, metalic base,complete with driver to operate on 240V AC 50 Hz, suitable for indoor application. Make Bajaj, Havells, HPL,Shakti Fixture and complete all as spe S & F LED bed side reading light fitting white/black powder coated housing with movable string, metalic base,complete with driver to operate on 240V AC 50 Hz, suitable for indoor application. Make Bajaj, Havells, HPL,Shakti Fixture and complete all as spe S & F LED bed side reading light fitting white/black powder coated housing with movable string, metalic base,complete with driver to operate on 240V AC 50 Hz, suitable for indoor application. Make Bajaj, Havells, HPL,Shakti Fixture and complete all as spe S & F LED bed side reading light fitting white/black powder coated housing with movable string, metalic base,complete with driver to operate on 240V AC 50 Hz, suitable for indoor application. Make Bajaj, Havells, HPL,Shakti Fixture and complete all as spe S & F LED bed side reading light fitting white/black powder coated housing with movable string, metalic base,complete with driver to operate on 240V AC 50 Hz, suitable for indoor application. Make Bajaj, Havells, HPL,Shakti Fixture and complete all as spe S & F LED bed side reading light fitting white/black powder coated housing with movable string, metalic base,complete with driver to operate on 240V AC 50 Hz, suitable for indoor application. Make Bajaj, Havells, HPL,Shakti Fixture and complete all as spe S & F LED bed side reading light fitting white/black powder coated housing with movable string, metalic base,complete with driver to operate on 240V AC 50 Hz, suitable for indoor application. Make Bajaj, Havells, HPL,Shakti Fixture and complete all as spe S & F LED bed side reading light fitting white/black powder coated housing with movable string, metalic base,complete with driver to operate on 240V AC 50 Hz, suitable for indoor application. Make Bajaj, Havells, HPL,Shakti Fixture and complete all as spe S & F LED bed side reading light fitting white/black powder coated housing with movable string, metalic base,complete with driver to operate on 240V AC 50 Hz, suitable for indoor application. Make Bajaj, Havells, HPL,Shakti Fixture and complete all as spe S & F LED bed side reading light fitting white/black powder coated housing with movable string, metalic base,complete with driver to operate on 240V AC 50 Hz, suitable for indoor application. Make Bajaj, Havells, HPL,Shakti Fixture and complete all as spe S & F LED bed side reading light fitting white/black powder coated housing with movable string, metalic base,complete with driver to operate on 240V AC 50 Hz, suitable for indoor application. Make Bajaj, Havells, HPL,Shakti Fixture and complete all as spe S & F LED bed side reading light fitting white/black powder coated housing with movable string, metalic base,complete with driver to operate on 240V AC 50 Hz, suitable for indoor application. Make Bajaj, Havells, HPL,Shakti Fixture and complete all as spe S & F LED bed side reading light fitting white/black powder coated housing with movable string, metalic base,complete with driver to operate on 240V AC 50 Hz, suitable for indoor application. Make Bajaj, Havells, HPL,Shakti Fixture and complete all as spe S & F LED bed side reading light fitting white/black powder coated housing with movable string, metalic base,complete with driver to operate on 240V AC 50 Hz, suitable for indoor application. Make Bajaj, Havells, HPL,Shakti Fixture and complete all as spe S & F LED bed side reading light fitting white/black powder coated housing with movable string, metalic base,complete with driver to operate on 240V AC 50 Hz, suitable for indoor application. Make Bajaj, Havells, HPL,Shakti Fixture and complete all as spe S & F LED bed side reading light fitting white/black powder coated housing with movable string, metalic base,complete with driver to operate on 240V AC 50 Hz, suitable for indoor application. Make Bajaj, Havells, HPL,Shakti Fixture and complete all as spe S & F LED bed side reading light fitting white/black powder coated housing with movable string, metalic base,complete with driver to operate on 240V AC 50 Hz, suitable for indoor application. Make Bajaj, Havells, HPL,Shakti Fixture and complete all as spe S & F LED bed side reading light fitting white/black powder coated housing with movable string, metalic base,complete with driver to operate on 240V AC 50 Hz, suitable for indoor application. Make Bajaj, Havells, HPL,Shakti Fixture and complete all as spe S & F LED bed side reading light fitting white/black powder coated housing with movable string, metalic base,complete with driver to operate on 240V AC 50 Hz, suitable for indoor application. Make Bajaj, Havells, HPL,Shakti Fixture and complete all as spe S & F LED bed side reading light fitting white/black powder coated housing with movable string, metalic base,complete with driver to operate on 240V AC 50 Hz, suitable for indoor application. Make Bajaj, Havells, HPL,Shakti Fixture and complete all as spe S & F LED bed side reading light fitting white/black powder coated housing with movable string, metalic base,complete with driver to operate on 240V AC 50 Hz, suitable for indoor application. Make Bajaj, Havells, HPL,Shakti Fixture and complete all as spe S & F LED bed side reading light fitting white/black powder coated housing with movable string, metalic base,complete with driver to operate on 240V AC 50 Hz, suitable for indoor application. Make Bajaj, Havells, HPL,Shakti Fixture and complete all as spe S & F LED bed side reading light fitting white/black powder coated housing with movable string, metalic base,complete with driver to operate on 240V AC 50 Hz, suitable for indoor application. Make Bajaj, Havells, HPL,Shakti Fixture and complete all as spe S & F LED bed side reading light fitting white/black powder coated housing with movable string, metalic base,complete with driver to operate on 240V AC 50 Hz, suitable for indoor application. Make Bajaj, Havells, HPL,Shakti Fixture and complete all as spe S & F LED bed side reading light fitting white/black powder coated housing with movable string, metalic base,complete with driver to operate on 240V AC 50 Hz, suitable for indoor application. Make Bajaj, Havells, HPL,Shakti Fixture and complete all as spe S & F LED bed side reading light fitting white/black powder coated housing with movable string, metalic base,complete with driver to operate on 240V AC 50 Hz, suitable for indoor application. Make Bajaj, Havells, HPL,Shakti Fixture and complete all as spe S & F LED bed side reading light fitting white/black powder coated housing with movable string, metalic base,complete with driver to operate on 240V AC 50 Hz, suitable for indoor application. Make Bajaj, Havells, HPL,Shakti Fixture and complete all as spe S & F LED bed side reading light fitting white/black powder coated housing with movable string, metalic base,complete with driver to operate on 240V AC 50 Hz, suitable for indoor application. Make Bajaj, Havells, HPL,Shakti Fixture and complete all as spe S & F LED bed side reading light fitting white/black powder coated housing with movable string, metalic base,complete with driver to operate on 240V AC 50 Hz, suitable for indoor application. Make Bajaj, Havells, HPL,Shakti Fixture and complete all as spe S & F LED bed side reading light fitting white/black powder coated housing with movable string, metalic base,complete with driver to operate on 240V AC 50 Hz, suitable for indoor application. Make Bajaj, Havells, HPL,Shakti Fixture and complete all as spe S & F LED bed side reading light fitting white/black powder coated housing with movable string, metalic base,complete with driver to operate on 240V AC 50 Hz, suitable for indoor application. Make Bajaj, Havells, HPL,Shakti Fixture and complete all as spe S & F LED bed side reading light fitting white/black powder coated housing with movable string, metalic base,complete with driver to operate on 240V AC 50 Hz, suitable for indoor application. Make Bajaj, Havells, HPL,Shakti Fixture and complete all as spe S & F LED bed side reading light fitting white/black powder coated housing with movable string, metalic base,complete with driver to operate on 240V AC 50 Hz, suitable for indoor application. Make Bajaj, Havells, HPL,Shakti Fixture and complete all as spe S & F LED bed side reading light fitting white/black powder coated housing with movable string, metalic base,complete with driver to operate on 240V AC 50 Hz, suitable for indoor application. Make Bajaj, Havells, HPL,Shakti Fixture and complete all as spe S & F LED bed side reading light fitting white/black powder coated housing with movable string, metalic base,complete with driver to operate on 240V AC 50 Hz, suitable for indoor application. Make Bajaj, Havells, HPL,Shakti Fixture and complete all as spe S & F LED bed side reading light fitting white/black powder coated housing with movable string, metalic base,complete with driver to operate on 240V AC 50 Hz, suitable for indoor application. Make Bajaj, Havells, HPL,Shakti Fixture and complete all as spe S & F LED bed side reading light fitting white/black powder coated housing with movable string, metalic base,complete with driver to operate on 240V AC 50 Hz, suitable for indoor application. Make Bajaj, Havells, HPL,Shakti Fixture and complete all as spe S & F LED bed side reading light fitting white/black powder coated housing with movable string, metalic base,complete with driver to operate on 240V AC 50 Hz, suitable for indoor application. Make Bajaj, Havells, HPL,Shakti Fixture and complete all as spe S & F LED bed side reading light fitting white/black powder coated housing with movable string, metalic base,complete with driver to operate on 240V AC 50 Hz, suitable for indoor application. Make Bajaj, Havells, HPL,Shakti Fixture and complete all as spe 0 S & F LED bed side reading light fitting white/black powder coated housing with movable string, metalic base,complete with driver to operate on 240V AC 50 Hz, suitable for indoor application. Make Bajaj, Havells, HPL,Shakti Fixture and complete all as spe 0

1 0 S&F Sheet metal enclosure distribution board VTPN,4 way, 415 volt, double door powder coated, protection class IP-54, isolated neutral bar, mechanical impact strength IK 09 suitable for mounting MCB & /MCCB DBs confirrming to IS-13032, IS-8632,BS5484 wi S&F Sheet metal enclosure distribution board VTPN,4 way, 415 volt, double door powder coated, protection class IP-54, isolated neutral bar, mechanical impact strength IK 09 suitable for mounting MCB & /MCCB DBs confirrming to IS-13032, IS-8632,BS5484 wi S&F Sheet metal enclosure distribution board VTPN,4 way, 415 volt, double door powder coated, protection class IP-54, isolated neutral bar, mechanical impact strength IK 09 suitable for mounting MCB & /MCCB DBs confirrming to IS-13032, IS-8632,BS5484 wi 1 S&F Sheet metal enclosure distribution board VTPN,4 way, 415 volt, double door powder coated, protection class IP-54, isolated neutral bar, mechanical impact strength IK 09 suitable for mounting MCB & /MCCB DBs confirrming to IS-13032, IS-8632,BS5484 wi S&F Sheet metal enclosure distribution board VTPN,4 way, 415 volt, double door powder coated, protection class IP-54, isolated neutral bar, mechanical impact strength IK 09 suitable for mounting MCB & /MCCB DBs confirrming to IS-13032, IS-8632,BS5484 wi S&F Sheet metal enclosure distribution board VTPN,4 way, 415 volt, double door powder coated, protection class IP-54, isolated neutral bar, mechanical impact strength IK 09 suitable for mounting MCB & /MCCB DBs confirrming to IS-13032, IS-8632,BS5484 wi S&F Sheet metal enclosure distribution board VTPN,4 way, 415 volt, double door powder coated, protection class IP-54, isolated neutral bar, mechanical impact strength IK 09 suitable for mounting MCB & /MCCB DBs confirrming to IS-13032, IS-8632,BS5484 wi S&F Sheet metal enclosure distribution board VTPN,4 way, 415 volt, double door powder coated, protection class IP-54, isolated neutral bar, mechanical impact strength IK 09 suitable for mounting MCB & /MCCB DBs confirrming to IS-13032, IS-8632,BS5484 wi S&F Sheet metal enclosure distribution board VTPN,4 way, 415 volt, double door powder coated, protection class IP-54, isolated neutral bar, mechanical impact strength IK 09 suitable for mounting MCB & /MCCB DBs confirrming to IS-13032, IS-8632,BS5484 wi S&F Sheet metal enclosure distribution board VTPN,4 way, 415 volt, double door powder coated, protection class IP-54, isolated neutral bar, mechanical impact strength IK 09 suitable for mounting MCB & /MCCB DBs confirrming to IS-13032, IS-8632,BS5484 wi S&F Sheet metal enclosure distribution board VTPN,4 way, 415 volt, double door powder coated, protection class IP-54, isolated neutral bar, mechanical impact strength IK 09 suitable for mounting MCB & /MCCB DBs confirrming to IS-13032, IS-8632,BS5484 wi S&F Sheet metal enclosure distribution board VTPN,4 way, 415 volt, double door powder coated, protection class IP-54, isolated neutral bar, mechanical impact strength IK 09 suitable for mounting MCB & /MCCB DBs confirrming to IS-13032, IS-8632,BS5484 wi S&F Sheet metal enclosure distribution board VTPN,4 way, 415 volt, double door powder coated, protection class IP-54, isolated neutral bar, mechanical impact strength IK 09 suitable for mounting MCB & /MCCB DBs confirrming to IS-13032, IS-8632,BS5484 wi S&F Sheet metal enclosure distribution board VTPN,4 way, 415 volt, double door powder coated, protection class IP-54, isolated neutral bar, mechanical impact strength IK 09 suitable for mounting MCB & /MCCB DBs confirrming to IS-13032, IS-8632,BS5484 wi S&F Sheet metal enclosure distribution board VTPN,4 way, 415 volt, double door powder coated, protection class IP-54, isolated neutral bar, mechanical impact strength IK 09 suitable for mounting MCB & /MCCB DBs confirrming to IS-13032, IS-8632,BS5484 wi S&F Sheet metal enclosure distribution board VTPN,4 way, 415 volt, double door powder coated, protection class IP-54, isolated neutral bar, mechanical impact strength IK 09 suitable for mounting MCB & /MCCB DBs confirrming to IS-13032, IS-8632,BS5484 wi S&F Sheet metal enclosure distribution board VTPN,4 way, 415 volt, double door powder coated, protection class IP-54, isolated neutral bar, mechanical impact strength IK 09 suitable for mounting MCB & /MCCB DBs confirrming to IS-13032, IS-8632,BS5484 wi S&F Sheet metal enclosure distribution board VTPN,4 way, 415 volt, double door powder coated, protection class IP-54, isolated neutral bar, mechanical impact strength IK 09 suitable for mounting MCB & /MCCB DBs confirrming to IS-13032, IS-8632,BS5484 wi S&F Sheet metal enclosure distribution board VTPN,4 way, 415 volt, double door powder coated, protection class IP-54, isolated neutral bar, mechanical impact strength IK 09 suitable for mounting MCB & /MCCB DBs confirrming to IS-13032, IS-8632,BS5484 wi S&F Sheet metal enclosure distribution board VTPN,4 way, 415 volt, double door powder coated, protection class IP-54, isolated neutral bar, mechanical impact strength IK 09 suitable for mounting MCB & /MCCB DBs confirrming to IS-13032, IS-8632,BS5484 wi S&F Sheet metal enclosure distribution board VTPN,4 way, 415 volt, double door powder coated, protection class IP-54, isolated neutral bar, mechanical impact strength IK 09 suitable for mounting MCB & /MCCB DBs confirrming to IS-13032, IS-8632,BS5484 wi S&F Sheet metal enclosure distribution board VTPN,4 way, 415 volt, double door powder coated, protection class IP-54, isolated neutral bar, mechanical impact strength IK 09 suitable for mounting MCB & /MCCB DBs confirrming to IS-13032, IS-8632,BS5484 wi S&F Sheet metal enclosure distribution board VTPN,4 way, 415 volt, double door powder coated, protection class IP-54, isolated neutral bar, mechanical impact strength IK 09 suitable for mounting MCB & /MCCB DBs confirrming to IS-13032, IS-8632,BS5484 wi S&F Sheet metal enclosure distribution board VTPN,4 way, 415 volt, double door powder coated, protection class IP-54, isolated neutral bar, mechanical impact strength IK 09 suitable for mounting MCB & /MCCB DBs confirrming to IS-13032, IS-8632,BS5484 wi S&F Sheet metal enclosure distribution board VTPN,4 way, 415 volt, double door powder coated, protection class IP-54, isolated neutral bar, mechanical impact strength IK 09 suitable for mounting MCB & /MCCB DBs confirrming to IS-13032, IS-8632,BS5484 wi S&F Sheet metal enclosure distribution board VTPN,4 way, 415 volt, double door powder coated, protection class IP-54, isolated neutral bar, mechanical impact strength IK 09 suitable for mounting MCB & /MCCB DBs confirrming to IS-13032, IS-8632,BS5484 wi S&F Sheet metal enclosure distribution board VTPN,4 way, 415 volt, double door powder coated, protection class IP-54, isolated neutral bar, mechanical impact strength IK 09 suitable for mounting MCB & /MCCB DBs confirrming to IS-13032, IS-8632,BS5484 wi S&F Sheet metal enclosure distribution board VTPN,4 way, 415 volt, double door powder coated, protection class IP-54, isolated neutral bar, mechanical impact strength IK 09 suitable for mounting MCB & /MCCB DBs confirrming to IS-13032, IS-8632,BS5484 wi S&F Sheet metal enclosure distribution board VTPN,4 way, 415 volt, double door powder coated, protection class IP-54, isolated neutral bar, mechanical impact strength IK 09 suitable for mounting MCB & /MCCB DBs confirrming to IS-13032, IS-8632,BS5484 wi S&F Sheet metal enclosure distribution board VTPN,4 way, 415 volt, double door powder coated, protection class IP-54, isolated neutral bar, mechanical impact strength IK 09 suitable for mounting MCB & /MCCB DBs confirrming to IS-13032, IS-8632,BS5484 wi S&F Sheet metal enclosure distribution board VTPN,4 way, 415 volt, double door powder coated, protection class IP-54, isolated neutral bar, mechanical impact strength IK 09 suitable for mounting MCB & /MCCB DBs confirrming to IS-13032, IS-8632,BS5484 wi S&F Sheet metal enclosure distribution board VTPN,4 way, 415 volt, double door powder coated, protection class IP-54, isolated neutral bar, mechanical impact strength IK 09 suitable for mounting MCB & /MCCB DBs confirrming to IS-13032, IS-8632,BS5484 wi S&F Sheet metal enclosure distribution board VTPN,4 way, 415 volt, double door powder coated, protection class IP-54, isolated neutral bar, mechanical impact strength IK 09 suitable for mounting MCB & /MCCB DBs confirrming to IS-13032, IS-8632,BS5484 wi S&F Sheet metal enclosure distribution board VTPN,4 way, 415 volt, double door powder coated, protection class IP-54, isolated neutral bar, mechanical impact strength IK 09 suitable for mounting MCB & /MCCB DBs confirrming to IS-13032, IS-8632,BS5484 wi S&F Sheet metal enclosure distribution board VTPN,4 way, 415 volt, double door powder coated, protection class IP-54, isolated neutral bar, mechanical impact strength IK 09 suitable for mounting MCB & /MCCB DBs confirrming to IS-13032, IS-8632,BS5484 wi S&F Sheet metal enclosure distribution board VTPN,4 way, 415 volt, double door powder coated, protection class IP-54, isolated neutral bar, mechanical impact strength IK 09 suitable for mounting MCB & /MCCB DBs confirrming to IS-13032, IS-8632,BS5484 wi S&F Sheet metal enclosure distribution board VTPN,4 way, 415 volt, double door powder coated, protection class IP-54, isolated neutral bar, mechanical impact strength IK 09 suitable for mounting MCB & /MCCB DBs confirrming to IS-13032, IS-8632,BS5484 wi S&F Sheet metal enclosure distribution board VTPN,4 way, 415 volt, double door powder coated, protection class IP-54, isolated neutral bar, mechanical impact strength IK 09 suitable for mounting MCB & /MCCB DBs confirrming to IS-13032, IS-8632,BS5484 wi S&F Sheet metal enclosure distribution board VTPN,4 way, 415 volt, double door powder coated, protection class IP-54, isolated neutral bar, mechanical impact strength IK 09 suitable for mounting MCB & /MCCB DBs confirrming to IS-13032, IS-8632,BS5484 wi S&F Sheet metal enclosure distribution board VTPN,4 way, 415 volt, double door powder coated, protection class IP-54, isolated neutral bar, mechanical impact strength IK 09 suitable for mounting MCB & /MCCB DBs confirrming to IS-13032, IS-8632,BS5484 wi S&F Sheet metal enclosure distribution board VTPN,4 way, 415 volt, double door powder coated, protection class IP-54, isolated neutral bar, mechanical impact strength IK 09 suitable for mounting MCB & /MCCB DBs confirrming to IS-13032, IS-8632,BS5484 wi S&F Sheet metal enclosure distribution board VTPN,4 way, 415 volt, double door powder coated, protection class IP-54, isolated neutral bar, mechanical impact strength IK 09 suitable for mounting MCB & /MCCB DBs confirrming to IS-13032, IS-8632,BS5484 wi S&F Sheet metal enclosure distribution board VTPN,4 way, 415 volt, double door powder coated, protection class IP-54, isolated neutral bar, mechanical impact strength IK 09 suitable for mounting MCB & /MCCB DBs confirrming to IS-13032, IS-8632,BS5484 wi S&F Sheet metal enclosure distribution board VTPN,4 way, 415 volt, double door powder coated, protection class IP-54, isolated neutral bar, mechanical impact strength IK 09 suitable for mounting MCB & /MCCB DBs confirrming to IS-13032, IS-8632,BS5484 wi 0 S&F Sheet metal enclosure distribution board VTPN,4 way, 415 volt, double door powder coated, protection class IP-54, isolated neutral bar, mechanical impact strength IK 09 suitable for mounting MCB & /MCCB DBs confirrming to IS-13032, IS-8632,BS5484 wi 0

Supply and fixing of MCBs SP 63 Amps, 240 volts, 10 KA 'B' curve rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) and complete all as specified and as directed by Engr Supply and fixing of MCBs SP 63 Amps, 240 volts, 10 KA 'B' curve rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) and complete all as specified and as directed by Engr Supply and fixing of MCBs SP 63 Amps, 240 volts, 10 KA 'B' curve rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) and complete all as specified and as directed by Engr Supply and fixing of MCBs SP 63 Amps, 240 volts, 10 KA 'B' curve rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) and complete all as specified and as directed by Engr Supply and fixing of MCBs SP 63 Amps, 240 volts, 10 KA 'B' curve rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) and complete all as specified and as directed by Engr Supply and fixing of MCBs SP 63 Amps, 240 volts, 10 KA 'B' curve rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) and complete all as specified and as directed by Engr Supply and fixing of MCBs SP 63 Amps, 240 volts, 10 KA 'B' curve rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) and complete all as specified and as directed by Engr Supply and fixing of MCBs SP 63 Amps, 240 volts, 10 KA 'B' curve rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) and complete all as specified and as directed by Engr Supply and fixing of MCBs SP 63 Amps, 240 volts, 10 KA 'B' curve rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) and complete all as specified and as directed by Engr Supply and fixing of MCBs SP 63 Amps, 240 volts, 10 KA 'B' curve rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) and complete all as specified and as directed by Engr Supply and fixing of MCBs SP 63 Amps, 240 volts, 10 KA 'B' curve rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) and complete all as specified and as directed by Engr Supply and fixing of MCBs SP 63 Amps, 240 volts, 10 KA 'B' curve rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) and complete all as specified and as directed by Engr Supply and fixing of MCBs SP 63 Amps, 240 volts, 10 KA 'B' curve rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) and complete all as specified and as directed by Engr Supply and fixing of MCBs SP 63 Amps, 240 volts, 10 KA 'B' curve rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) and complete all as specified and as directed by Engr Supply and fixing of MCBs SP 63 Amps, 240 volts, 10 KA 'B' curve rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) and complete all as specified and as directed by Engr Supply and fixing of MCBs SP 63 Amps, 240 volts, 10 KA 'B' curve rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) and complete all as specified and as directed by Engr Supply and fixing of MCBs SP 63 Amps, 240 volts, 10 KA 'B' curve rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) and complete all as specified and as directed by Engr Supply and fixing of MCBs SP 63 Amps, 240 volts, 10 KA 'B' curve rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) and complete all as specified and as directed by Engr Supply and fixing of MCBs SP 63 Amps, 240 volts, 10 KA 'B' curve rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) and complete all as specified and as directed by Engr Supply and fixing of MCBs SP 63 Amps, 240 volts, 10 KA 'B' curve rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) and complete all as specified and as directed by Engr Supply and fixing of MCBs SP 63 Amps, 240 volts, 10 KA 'B' curve rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) and complete all as specified and as directed by Engr Supply and fixing of MCBs SP 63 Amps, 240 volts, 10 KA 'B' curve rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) and complete all as specified and as directed by Engr Supply and fixing of MCBs SP 63 Amps, 240 volts, 10 KA 'B' curve rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) and complete all as specified and as directed by Engr Supply and fixing of MCBs SP 63 Amps, 240 volts, 10 KA 'B' curve rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) and complete all as specified and as directed by Engr Supply and fixing of MCBs SP 63 Amps, 240 volts, 10 KA 'B' curve rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) and complete all as specified and as directed by Engr Supply and fixing of MCBs SP 63 Amps, 240 volts, 10 KA 'B' curve rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) and complete all as specified and as directed by Engr Supply and fixing of MCBs SP 63 Amps, 240 volts, 10 KA 'B' curve rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) and complete all as specified and as directed by Engr Supply and fixing of MCBs SP 63 Amps, 240 volts, 10 KA 'B' curve rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) and complete all as specified and as directed by Engr Supply and fixing of MCBs SP 63 Amps, 240 volts, 10 KA 'B' curve rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) and complete all as specified and as directed by Engr Supply and fixing of MCBs SP 63 Amps, 240 volts, 10 KA 'B' curve rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) and complete all as specified and as directed by Engr Supply and fixing of MCBs SP 63 Amps, 240 volts, 10 KA 'B' curve rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) and complete all as specified and as directed by Engr Supply and fixing of MCBs SP 63 Amps, 240 volts, 10 KA 'B' curve rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) and complete all as specified and as directed by Engr Supply and fixing of MCBs SP 63 Amps, 240 volts, 10 KA 'B' curve rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) and complete all as specified and as directed by Engr Supply and fixing of MCBs SP 63 Amps, 240 volts, 10 KA 'B' curve rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) and complete all as specified and as directed by Engr Supply and fixing of MCBs SP 63 Amps, 240 volts, 10 KA 'B' curve rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) and complete all as specified and as directed by Engr Supply and fixing of MCBs SP 63 Amps, 240 volts, 10 KA 'B' curve rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) and complete all as specified and as directed by Engr Supply and fixing of MCBs SP 63 Amps, 240 volts, 10 KA 'B' curve rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) and complete all as specified and as directed by Engr Supply and fixing of MCBs SP 63 Amps, 240 volts, 10 KA 'B' curve rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) and complete all as specified and as directed by Engr Supply and fixing of MCBs SP 63 Amps, 240 volts, 10 KA 'B' curve rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) and complete all as specified and as directed by Engr Supply and fixing of MCBs SP 63 Amps, 240 volts, 10 KA 'B' curve rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) and complete all as specified and as directed by Engr Supply and fixing of MCBs SP 63 Amps, 240 volts, 10 KA 'B' curve rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) and complete all as specified and as directed by Engr Supply and fixing of MCBs SP 63 Amps, 240 volts, 10 KA 'B' curve rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) and complete all as specified and as directed by Engr Supply and fixing of MCBs SP 63 Amps, 240 volts, 10 KA 'B' curve rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) and complete all as specified and as directed by Engr Supply and fixing of MCBs SP 63 Amps, 240 volts, 10 KA 'B' curve rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) and complete all as specified and as directed by Engr Supply and fixing of MCBs SP 63 Amps, 240 volts, 10 KA 'B' curve rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) and complete all as specified and as directed by Engr

310 0 M&L for concealed flame proof point wiring (using red, black and green colour wires as colour coding for single phase circuit) for one light point complete with 1.50 Sqmm (nominal cross sectional area) FRLSH PVC insulated unsheathed and multistranded cop M&L for concealed flame proof point wiring (using red, black and green colour wires as colour coding for single phase circuit) for one light point complete with 1.50 Sqmm (nominal cross sectional area) FRLSH PVC insulated unsheathed and multistranded cop M&L for concealed flame proof point wiring (using red, black and green colour wires as colour coding for single phase circuit) for one light point complete with 1.50 Sqmm (nominal cross sectional area) FRLSH PVC insulated unsheathed and multistranded cop 1 M&L for concealed flame proof point wiring (using red, black and green colour wires as colour coding for single phase circuit) for one light point complete with 1.50 Sqmm (nominal cross sectional area) FRLSH PVC insulated unsheathed and multistranded cop M&L for concealed flame proof point wiring (using red, black and green colour wires as colour coding for single phase circuit) for one light point complete with 1.50 Sqmm (nominal cross sectional area) FRLSH PVC insulated unsheathed and multistranded cop M&L for concealed flame proof point wiring (using red, black and green colour wires as colour coding for single phase circuit) for one light point complete with 1.50 Sqmm (nominal cross sectional area) FRLSH PVC insulated unsheathed and multistranded cop M&L for concealed flame proof point wiring (using red, black and green colour wires as colour coding for single phase circuit) for one light point complete with 1.50 Sqmm (nominal cross sectional area) FRLSH PVC insulated unsheathed and multistranded cop M&L for concealed flame proof point wiring (using red, black and green colour wires as colour coding for single phase circuit) for one light point complete with 1.50 Sqmm (nominal cross sectional area) FRLSH PVC insulated unsheathed and multistranded cop M&L for concealed flame proof point wiring (using red, black and green colour wires as colour coding for single phase circuit) for one light point complete with 1.50 Sqmm (nominal cross sectional area) FRLSH PVC insulated unsheathed and multistranded cop M&L for concealed flame proof point wiring (using red, black and green colour wires as colour coding for single phase circuit) for one light point complete with 1.50 Sqmm (nominal cross sectional area) FRLSH PVC insulated unsheathed and multistranded cop M&L for concealed flame proof point wiring (using red, black and green colour wires as colour coding for single phase circuit) for one light point complete with 1.50 Sqmm (nominal cross sectional area) FRLSH PVC insulated unsheathed and multistranded cop M&L for concealed flame proof point wiring (using red, black and green colour wires as colour coding for single phase circuit) for one light point complete with 1.50 Sqmm (nominal cross sectional area) FRLSH PVC insulated unsheathed and multistranded cop M&L for concealed flame proof point wiring (using red, black and green colour wires as colour coding for single phase circuit) for one light point complete with 1.50 Sqmm (nominal cross sectional area) FRLSH PVC insulated unsheathed and multistranded cop M&L for concealed flame proof point wiring (using red, black and green colour wires as colour coding for single phase circuit) for one light point complete with 1.50 Sqmm (nominal cross sectional area) FRLSH PVC insulated unsheathed and multistranded cop M&L for concealed flame proof point wiring (using red, black and green colour wires as colour coding for single phase circuit) for one light point complete with 1.50 Sqmm (nominal cross sectional area) FRLSH PVC insulated unsheathed and multistranded cop M&L for concealed flame proof point wiring (using red, black and green colour wires as colour coding for single phase circuit) for one light point complete with 1.50 Sqmm (nominal cross sectional area) FRLSH PVC insulated unsheathed and multistranded cop M&L for concealed flame proof point wiring (using red, black and green colour wires as colour coding for single phase circuit) for one light point complete with 1.50 Sqmm (nominal cross sectional area) FRLSH PVC insulated unsheathed and multistranded cop M&L for concealed flame proof point wiring (using red, black and green colour wires as colour coding for single phase circuit) for one light point complete with 1.50 Sqmm (nominal cross sectional area) FRLSH PVC insulated unsheathed and multistranded cop M&L for concealed flame proof point wiring (using red, black and green colour wires as colour coding for single phase circuit) for one light point complete with 1.50 Sqmm (nominal cross sectional area) FRLSH PVC insulated unsheathed and multistranded cop M&L for concealed flame proof point wiring (using red, black and green colour wires as colour coding for single phase circuit) for one light point complete with 1.50 Sqmm (nominal cross sectional area) FRLSH PVC insulated unsheathed and multistranded cop M&L for concealed flame proof point wiring (using red, black and green colour wires as colour coding for single phase circuit) for one light point complete with 1.50 Sqmm (nominal cross sectional area) FRLSH PVC insulated unsheathed and multistranded cop M&L for concealed flame proof point wiring (using red, black and green colour wires as colour coding for single phase circuit) for one light point complete with 1.50 Sqmm (nominal cross sectional area) FRLSH PVC insulated unsheathed and multistranded cop M&L for concealed flame proof point wiring (using red, black and green colour wires as colour coding for single phase circuit) for one light point complete with 1.50 Sqmm (nominal cross sectional area) FRLSH PVC insulated unsheathed and multistranded cop M&L for concealed flame proof point wiring (using red, black and green colour wires as colour coding for single phase circuit) for one light point complete with 1.50 Sqmm (nominal cross sectional area) FRLSH PVC insulated unsheathed and multistranded cop M&L for concealed flame proof point wiring (using red, black and green colour wires as colour coding for single phase circuit) for one light point complete with 1.50 Sqmm (nominal cross sectional area) FRLSH PVC insulated unsheathed and multistranded cop M&L for concealed flame proof point wiring (using red, black and green colour wires as colour coding for single phase circuit) for one light point complete with 1.50 Sqmm (nominal cross sectional area) FRLSH PVC insulated unsheathed and multistranded cop M&L for concealed flame proof point wiring (using red, black and green colour wires as colour coding for single phase circuit) for one light point complete with 1.50 Sqmm (nominal cross sectional area) FRLSH PVC insulated unsheathed and multistranded cop M&L for concealed flame proof point wiring (using red, black and green colour wires as colour coding for single phase circuit) for one light point complete with 1.50 Sqmm (nominal cross sectional area) FRLSH PVC insulated unsheathed and multistranded cop M&L for concealed flame proof point wiring (using red, black and green colour wires as colour coding for single phase circuit) for one light point complete with 1.50 Sqmm (nominal cross sectional area) FRLSH PVC insulated unsheathed and multistranded cop M&L for concealed flame proof point wiring (using red, black and green colour wires as colour coding for single phase circuit) for one light point complete with 1.50 Sqmm (nominal cross sectional area) FRLSH PVC insulated unsheathed and multistranded cop M&L for concealed flame proof point wiring (using red, black and green colour wires as colour coding for single phase circuit) for one light point complete with 1.50 Sqmm (nominal cross sectional area) FRLSH PVC insulated unsheathed and multistranded cop M&L for concealed flame proof point wiring (using red, black and green colour wires as colour coding for single phase circuit) for one light point complete with 1.50 Sqmm (nominal cross sectional area) FRLSH PVC insulated unsheathed and multistranded cop M&L for concealed flame proof point wiring (using red, black and green colour wires as colour coding for single phase circuit) for one light point complete with 1.50 Sqmm (nominal cross sectional area) FRLSH PVC insulated unsheathed and multistranded cop M&L for concealed flame proof point wiring (using red, black and green colour wires as colour coding for single phase circuit) for one light point complete with 1.50 Sqmm (nominal cross sectional area) FRLSH PVC insulated unsheathed and multistranded cop M&L for concealed flame proof point wiring (using red, black and green colour wires as colour coding for single phase circuit) for one light point complete with 1.50 Sqmm (nominal cross sectional area) FRLSH PVC insulated unsheathed and multistranded cop M&L for concealed flame proof point wiring (using red, black and green colour wires as colour coding for single phase circuit) for one light point complete with 1.50 Sqmm (nominal cross sectional area) FRLSH PVC insulated unsheathed and multistranded cop M&L for concealed flame proof point wiring (using red, black and green colour wires as colour coding for single phase circuit) for one light point complete with 1.50 Sqmm (nominal cross sectional area) FRLSH PVC insulated unsheathed and multistranded cop M&L for concealed flame proof point wiring (using red, black and green colour wires as colour coding for single phase circuit) for one light point complete with 1.50 Sqmm (nominal cross sectional area) FRLSH PVC insulated unsheathed and multistranded cop M&L for concealed flame proof point wiring (using red, black and green colour wires as colour coding for single phase circuit) for one light point complete with 1.50 Sqmm (nominal cross sectional area) FRLSH PVC insulated unsheathed and multistranded cop M&L for concealed flame proof point wiring (using red, black and green colour wires as colour coding for single phase circuit) for one light point complete with 1.50 Sqmm (nominal cross sectional area) FRLSH PVC insulated unsheathed and multistranded cop M&L for concealed flame proof point wiring (using red, black and green colour wires as colour coding for single phase circuit) for one light point complete with 1.50 Sqmm (nominal cross sectional area) FRLSH PVC insulated unsheathed and multistranded cop M&L for concealed flame proof point wiring (using red, black and green colour wires as colour coding for single phase circuit) for one light point complete with 1.50 Sqmm (nominal cross sectional area) FRLSH PVC insulated unsheathed and multistranded cop M&L for concealed flame proof point wiring (using red, black and green colour wires as colour coding for single phase circuit) for one light point complete with 1.50 Sqmm (nominal cross sectional area) FRLSH PVC insulated unsheathed and multistranded cop M&L for concealed flame proof point wiring (using red, black and green colour wires as colour coding for single phase circuit) for one light point complete with 1.50 Sqmm (nominal cross sectional area) FRLSH PVC insulated unsheathed and multistranded cop 0 M&L for concealed flame proof point wiring (using red, black and green colour wires as colour coding for single phase circuit) for one light point complete with 1.50 Sqmm (nominal cross sectional area) FRLSH PVC insulated unsheathed and multistranded cop 0

85 0 Supply and fixing (Concealed in wall) factory made flameproof DB Duly painted, 4 way dust and vermin proof including operatin Knob, cable glands, earth bar, bus bar with all accessoreis and comprising of the following including all as specified and as di Supply and fixing (Concealed in wall) factory made flameproof DB Duly painted, 4 way dust and vermin proof including operatin Knob, cable glands, earth bar, bus bar with all accessoreis and comprising of the following including all as specified and as di Supply and fixing (Concealed in wall) factory made flameproof DB Duly painted, 4 way dust and vermin proof including operatin Knob, cable glands, earth bar, bus bar with all accessoreis and comprising of the following including all as specified and as di 1 Supply and fixing (Concealed in wall) factory made flameproof DB Duly painted, 4 way dust and vermin proof including operatin Knob, cable glands, earth bar, bus bar with all accessoreis and comprising of the following including all as specified and as di Supply and fixing (Concealed in wall) factory made flameproof DB Duly painted, 4 way dust and vermin proof including operatin Knob, cable glands, earth bar, bus bar with all accessoreis and comprising of the following including all as specified and as di Supply and fixing (Concealed in wall) factory made flameproof DB Duly painted, 4 way dust and vermin proof including operatin Knob, cable glands, earth bar, bus bar with all accessoreis and comprising of the following including all as specified and as di Supply and fixing (Concealed in wall) factory made flameproof DB Duly painted, 4 way dust and vermin proof including operatin Knob, cable glands, earth bar, bus bar with all accessoreis and comprising of the following including all as specified and as di Supply and fixing (Concealed in wall) factory made flameproof DB Duly painted, 4 way dust and vermin proof including operatin Knob, cable glands, earth bar, bus bar with all accessoreis and comprising of the following including all as specified and as di Supply and fixing (Concealed in wall) factory made flameproof DB Duly painted, 4 way dust and vermin proof including operatin Knob, cable glands, earth bar, bus bar with all accessoreis and comprising of the following including all as specified and as di Supply and fixing (Concealed in wall) factory made flameproof DB Duly painted, 4 way dust and vermin proof including operatin Knob, cable glands, earth bar, bus bar with all accessoreis and comprising of the following including all as specified and as di Supply and fixing (Concealed in wall) factory made flameproof DB Duly painted, 4 way dust and vermin proof including operatin Knob, cable glands, earth bar, bus bar with all accessoreis and comprising of the following including all as specified and as di Supply and fixing (Concealed in wall) factory made flameproof DB Duly painted, 4 way dust and vermin proof including operatin Knob, cable glands, earth bar, bus bar with all accessoreis and comprising of the following including all as specified and as di Supply and fixing (Concealed in wall) factory made flameproof DB Duly painted, 4 way dust and vermin proof including operatin Knob, cable glands, earth bar, bus bar with all accessoreis and comprising of the following including all as specified and as di Supply and fixing (Concealed in wall) factory made flameproof DB Duly painted, 4 way dust and vermin proof including operatin Knob, cable glands, earth bar, bus bar with all accessoreis and comprising of the following including all as specified and as di Supply and fixing (Concealed in wall) factory made flameproof DB Duly painted, 4 way dust and vermin proof including operatin Knob, cable glands, earth bar, bus bar with all accessoreis and comprising of the following including all as specified and as di Supply and fixing (Concealed in wall) factory made flameproof DB Duly painted, 4 way dust and vermin proof including operatin Knob, cable glands, earth bar, bus bar with all accessoreis and comprising of the following including all as specified and as di Supply and fixing (Concealed in wall) factory made flameproof DB Duly painted, 4 way dust and vermin proof including operatin Knob, cable glands, earth bar, bus bar with all accessoreis and comprising of the following including all as specified and as di Supply and fixing (Concealed in wall) factory made flameproof DB Duly painted, 4 way dust and vermin proof including operatin Knob, cable glands, earth bar, bus bar with all accessoreis and comprising of the following including all as specified and as di Supply and fixing (Concealed in wall) factory made flameproof DB Duly painted, 4 way dust and vermin proof including operatin Knob, cable glands, earth bar, bus bar with all accessoreis and comprising of the following including all as specified and as di Supply and fixing (Concealed in wall) factory made flameproof DB Duly painted, 4 way dust and vermin proof including operatin Knob, cable glands, earth bar, bus bar with all accessoreis and comprising of the following including all as specified and as di Supply and fixing (Concealed in wall) factory made flameproof DB Duly painted, 4 way dust and vermin proof including operatin Knob, cable glands, earth bar, bus bar with all accessoreis and comprising of the following including all as specified and as di Supply and fixing (Concealed in wall) factory made flameproof DB Duly painted, 4 way dust and vermin proof including operatin Knob, cable glands, earth bar, bus bar with all accessoreis and comprising of the following including all as specified and as di Supply and fixing (Concealed in wall) factory made flameproof DB Duly painted, 4 way dust and vermin proof including operatin Knob, cable glands, earth bar, bus bar with all accessoreis and comprising of the following including all as specified and as di Supply and fixing (Concealed in wall) factory made flameproof DB Duly painted, 4 way dust and vermin proof including operatin Knob, cable glands, earth bar, bus bar with all accessoreis and comprising of the following including all as specified and as di Supply and fixing (Concealed in wall) factory made flameproof DB Duly painted, 4 way dust and vermin proof including operatin Knob, cable glands, earth bar, bus bar with all accessoreis and comprising of the following including all as specified and as di Supply and fixing (Concealed in wall) factory made flameproof DB Duly painted, 4 way dust and vermin proof including operatin Knob, cable glands, earth bar, bus bar with all accessoreis and comprising of the following including all as specified and as di Supply and fixing (Concealed in wall) factory made flameproof DB Duly painted, 4 way dust and vermin proof including operatin Knob, cable glands, earth bar, bus bar with all accessoreis and comprising of the following including all as specified and as di Supply and fixing (Concealed in wall) factory made flameproof DB Duly painted, 4 way dust and vermin proof including operatin Knob, cable glands, earth bar, bus bar with all accessoreis and comprising of the following including all as specified and as di Supply and fixing (Concealed in wall) factory made flameproof DB Duly painted, 4 way dust and vermin proof including operatin Knob, cable glands, earth bar, bus bar with all accessoreis and comprising of the following including all as specified and as di Supply and fixing (Concealed in wall) factory made flameproof DB Duly painted, 4 way dust and vermin proof including operatin Knob, cable glands, earth bar, bus bar with all accessoreis and comprising of the following including all as specified and as di Supply and fixing (Concealed in wall) factory made flameproof DB Duly painted, 4 way dust and vermin proof including operatin Knob, cable glands, earth bar, bus bar with all accessoreis and comprising of the following including all as specified and as di Supply and fixing (Concealed in wall) factory made flameproof DB Duly painted, 4 way dust and vermin proof including operatin Knob, cable glands, earth bar, bus bar with all accessoreis and comprising of the following including all as specified and as di Supply and fixing (Concealed in wall) factory made flameproof DB Duly painted, 4 way dust and vermin proof including operatin Knob, cable glands, earth bar, bus bar with all accessoreis and comprising of the following including all as specified and as di Supply and fixing (Concealed in wall) factory made flameproof DB Duly painted, 4 way dust and vermin proof including operatin Knob, cable glands, earth bar, bus bar with all accessoreis and comprising of the following including all as specified and as di Supply and fixing (Concealed in wall) factory made flameproof DB Duly painted, 4 way dust and vermin proof including operatin Knob, cable glands, earth bar, bus bar with all accessoreis and comprising of the following including all as specified and as di Supply and fixing (Concealed in wall) factory made flameproof DB Duly painted, 4 way dust and vermin proof including operatin Knob, cable glands, earth bar, bus bar with all accessoreis and comprising of the following including all as specified and as di Supply and fixing (Concealed in wall) factory made flameproof DB Duly painted, 4 way dust and vermin proof including operatin Knob, cable glands, earth bar, bus bar with all accessoreis and comprising of the following including all as specified and as di Supply and fixing (Concealed in wall) factory made flameproof DB Duly painted, 4 way dust and vermin proof including operatin Knob, cable glands, earth bar, bus bar with all accessoreis and comprising of the following including all as specified and as di Supply and fixing (Concealed in wall) factory made flameproof DB Duly painted, 4 way dust and vermin proof including operatin Knob, cable glands, earth bar, bus bar with all accessoreis and comprising of the following including all as specified and as di Supply and fixing (Concealed in wall) factory made flameproof DB Duly painted, 4 way dust and vermin proof including operatin Knob, cable glands, earth bar, bus bar with all accessoreis and comprising of the following including all as specified and as di Supply and fixing (Concealed in wall) factory made flameproof DB Duly painted, 4 way dust and vermin proof including operatin Knob, cable glands, earth bar, bus bar with all accessoreis and comprising of the following including all as specified and as di Supply and fixing (Concealed in wall) factory made flameproof DB Duly painted, 4 way dust and vermin proof including operatin Knob, cable glands, earth bar, bus bar with all accessoreis and comprising of the following including all as specified and as di Supply and fixing (Concealed in wall) factory made flameproof DB Duly painted, 4 way dust and vermin proof including operatin Knob, cable glands, earth bar, bus bar with all accessoreis and comprising of the following including all as specified and as di Supply and fixing (Concealed in wall) factory made flameproof DB Duly painted, 4 way dust and vermin proof including operatin Knob, cable glands, earth bar, bus bar with all accessoreis and comprising of the following including all as specified and as di 0 Supply and fixing (Concealed in wall) factory made flameproof DB Duly painted, 4 way dust and vermin proof including operatin Knob, cable glands, earth bar, bus bar with all accessoreis and comprising of the following including all as specified and as di 0

16 0 ROAD, PATH AND CULVERT 19.00 ROAD, PATH AND CULVERT 19.00 ROAD, PATH AND CULVERT 19.00 1 ROAD, PATH AND CULVERT 19.00 ROAD, PATH AND CULVERT 19.00 ROAD, PATH AND CULVERT 19.00 ROAD, PATH AND CULVERT 19.00 ROAD, PATH AND CULVERT 19.00 ROAD, PATH AND CULVERT 19.00 ROAD, PATH AND CULVERT 19.00 ROAD, PATH AND CULVERT 19.00 ROAD, PATH AND CULVERT 19.00 ROAD, PATH AND CULVERT 19.00 ROAD, PATH AND CULVERT 19.00 ROAD, PATH AND CULVERT 19.00 ROAD, PATH AND CULVERT 19.00 ROAD, PATH AND CULVERT 19.00 ROAD, PATH AND CULVERT 19.00 ROAD, PATH AND CULVERT 19.00 ROAD, PATH AND CULVERT 19.00 ROAD, PATH AND CULVERT 19.00 ROAD, PATH AND CULVERT 19.00 ROAD, PATH AND CULVERT 19.00 ROAD, PATH AND CULVERT 19.00 ROAD, PATH AND CULVERT 19.00 ROAD, PATH AND CULVERT 19.00 ROAD, PATH AND CULVERT 19.00 ROAD, PATH AND CULVERT 19.00 ROAD, PATH AND CULVERT 19.00 ROAD, PATH AND CULVERT 19.00 ROAD, PATH AND CULVERT 19.00 ROAD, PATH AND CULVERT 19.00 ROAD, PATH AND CULVERT 19.00 ROAD, PATH AND CULVERT 19.00 ROAD, PATH AND CULVERT 19.00 ROAD, PATH AND CULVERT 19.00 ROAD, PATH AND CULVERT 19.00 ROAD, PATH AND CULVERT 19.00 ROAD, PATH AND CULVERT 19.00 ROAD, PATH AND CULVERT 19.00 ROAD, PATH AND CULVERT 19.00 ROAD, PATH AND CULVERT 19.00 ROAD, PATH AND CULVERT 19.00 ROAD, PATH AND CULVERT 19.00 0 ROAD, PATH AND CULVERT 19.00 0

M&L for painting lines, dashes, arrows, letters etc on roads pavements with coloured as directed by engineer-in-charge and the like exc 10 cm wide and 1 to 2 mm thick with hot thermoplastic road marking materials with the mechanical instruments including M&L for painting lines, dashes, arrows, letters etc on roads pavements with coloured as directed by engineer-in-charge and the like exc 10 cm wide and 1 to 2 mm thick with hot thermoplastic road marking materials with the mechanical instruments including M&L for painting lines, dashes, arrows, letters etc on roads pavements with coloured as directed by engineer-in-charge and the like exc 10 cm wide and 1 to 2 mm thick with hot thermoplastic road marking materials with the mechanical instruments including M&L for painting lines, dashes, arrows, letters etc on roads pavements with coloured as directed by engineer-in-charge and the like exc 10 cm wide and 1 to 2 mm thick with hot thermoplastic road marking materials with the mechanical instruments including M&L for painting lines, dashes, arrows, letters etc on roads pavements with coloured as directed by engineer-in-charge and the like exc 10 cm wide and 1 to 2 mm thick with hot thermoplastic road marking materials with the mechanical instruments including M&L for painting lines, dashes, arrows, letters etc on roads pavements with coloured as directed by engineer-in-charge and the like exc 10 cm wide and 1 to 2 mm thick with hot thermoplastic road marking materials with the mechanical instruments including M&L for painting lines, dashes, arrows, letters etc on roads pavements with coloured as directed by engineer-in-charge and the like exc 10 cm wide and 1 to 2 mm thick with hot thermoplastic road marking materials with the mechanical instruments including M&L for painting lines, dashes, arrows, letters etc on roads pavements with coloured as directed by engineer-in-charge and the like exc 10 cm wide and 1 to 2 mm thick with hot thermoplastic road marking materials with the mechanical instruments including M&L for painting lines, dashes, arrows, letters etc on roads pavements with coloured as directed by engineer-in-charge and the like exc 10 cm wide and 1 to 2 mm thick with hot thermoplastic road marking materials with the mechanical instruments including M&L for painting lines, dashes, arrows, letters etc on roads pavements with coloured as directed by engineer-in-charge and the like exc 10 cm wide and 1 to 2 mm thick with hot thermoplastic road marking materials with the mechanical instruments including M&L for painting lines, dashes, arrows, letters etc on roads pavements with coloured as directed by engineer-in-charge and the like exc 10 cm wide and 1 to 2 mm thick with hot thermoplastic road marking materials with the mechanical instruments including M&L for painting lines, dashes, arrows, letters etc on roads pavements with coloured as directed by engineer-in-charge and the like exc 10 cm wide and 1 to 2 mm thick with hot thermoplastic road marking materials with the mechanical instruments including M&L for painting lines, dashes, arrows, letters etc on roads pavements with coloured as directed by engineer-in-charge and the like exc 10 cm wide and 1 to 2 mm thick with hot thermoplastic road marking materials with the mechanical instruments including M&L for painting lines, dashes, arrows, letters etc on roads pavements with coloured as directed by engineer-in-charge and the like exc 10 cm wide and 1 to 2 mm thick with hot thermoplastic road marking materials with the mechanical instruments including M&L for painting lines, dashes, arrows, letters etc on roads pavements with coloured as directed by engineer-in-charge and the like exc 10 cm wide and 1 to 2 mm thick with hot thermoplastic road marking materials with the mechanical instruments including M&L for painting lines, dashes, arrows, letters etc on roads pavements with coloured as directed by engineer-in-charge and the like exc 10 cm wide and 1 to 2 mm thick with hot thermoplastic road marking materials with the mechanical instruments including M&L for painting lines, dashes, arrows, letters etc on roads pavements with coloured as directed by engineer-in-charge and the like exc 10 cm wide and 1 to 2 mm thick with hot thermoplastic road marking materials with the mechanical instruments including M&L for painting lines, dashes, arrows, letters etc on roads pavements with coloured as directed by engineer-in-charge and the like exc 10 cm wide and 1 to 2 mm thick with hot thermoplastic road marking materials with the mechanical instruments including M&L for painting lines, dashes, arrows, letters etc on roads pavements with coloured as directed by engineer-in-charge and the like exc 10 cm wide and 1 to 2 mm thick with hot thermoplastic road marking materials with the mechanical instruments including M&L for painting lines, dashes, arrows, letters etc on roads pavements with coloured as directed by engineer-in-charge and the like exc 10 cm wide and 1 to 2 mm thick with hot thermoplastic road marking materials with the mechanical instruments including M&L for painting lines, dashes, arrows, letters etc on roads pavements with coloured as directed by engineer-in-charge and the like exc 10 cm wide and 1 to 2 mm thick with hot thermoplastic road marking materials with the mechanical instruments including M&L for painting lines, dashes, arrows, letters etc on roads pavements with coloured as directed by engineer-in-charge and the like exc 10 cm wide and 1 to 2 mm thick with hot thermoplastic road marking materials with the mechanical instruments including M&L for painting lines, dashes, arrows, letters etc on roads pavements with coloured as directed by engineer-in-charge and the like exc 10 cm wide and 1 to 2 mm thick with hot thermoplastic road marking materials with the mechanical instruments including M&L for painting lines, dashes, arrows, letters etc on roads pavements with coloured as directed by engineer-in-charge and the like exc 10 cm wide and 1 to 2 mm thick with hot thermoplastic road marking materials with the mechanical instruments including M&L for painting lines, dashes, arrows, letters etc on roads pavements with coloured as directed by engineer-in-charge and the like exc 10 cm wide and 1 to 2 mm thick with hot thermoplastic road marking materials with the mechanical instruments including M&L for painting lines, dashes, arrows, letters etc on roads pavements with coloured as directed by engineer-in-charge and the like exc 10 cm wide and 1 to 2 mm thick with hot thermoplastic road marking materials with the mechanical instruments including M&L for painting lines, dashes, arrows, letters etc on roads pavements with coloured as directed by engineer-in-charge and the like exc 10 cm wide and 1 to 2 mm thick with hot thermoplastic road marking materials with the mechanical instruments including M&L for painting lines, dashes, arrows, letters etc on roads pavements with coloured as directed by engineer-in-charge and the like exc 10 cm wide and 1 to 2 mm thick with hot thermoplastic road marking materials with the mechanical instruments including M&L for painting lines, dashes, arrows, letters etc on roads pavements with coloured as directed by engineer-in-charge and the like exc 10 cm wide and 1 to 2 mm thick with hot thermoplastic road marking materials with the mechanical instruments including M&L for painting lines, dashes, arrows, letters etc on roads pavements with coloured as directed by engineer-in-charge and the like exc 10 cm wide and 1 to 2 mm thick with hot thermoplastic road marking materials with the mechanical instruments including M&L for painting lines, dashes, arrows, letters etc on roads pavements with coloured as directed by engineer-in-charge and the like exc 10 cm wide and 1 to 2 mm thick with hot thermoplastic road marking materials with the mechanical instruments including M&L for painting lines, dashes, arrows, letters etc on roads pavements with coloured as directed by engineer-in-charge and the like exc 10 cm wide and 1 to 2 mm thick with hot thermoplastic road marking materials with the mechanical instruments including M&L for painting lines, dashes, arrows, letters etc on roads pavements with coloured as directed by engineer-in-charge and the like exc 10 cm wide and 1 to 2 mm thick with hot thermoplastic road marking materials with the mechanical instruments including M&L for painting lines, dashes, arrows, letters etc on roads pavements with coloured as directed by engineer-in-charge and the like exc 10 cm wide and 1 to 2 mm thick with hot thermoplastic road marking materials with the mechanical instruments including M&L for painting lines, dashes, arrows, letters etc on roads pavements with coloured as directed by engineer-in-charge and the like exc 10 cm wide and 1 to 2 mm thick with hot thermoplastic road marking materials with the mechanical instruments including M&L for painting lines, dashes, arrows, letters etc on roads pavements with coloured as directed by engineer-in-charge and the like exc 10 cm wide and 1 to 2 mm thick with hot thermoplastic road marking materials with the mechanical instruments including M&L for painting lines, dashes, arrows, letters etc on roads pavements with coloured as directed by engineer-in-charge and the like exc 10 cm wide and 1 to 2 mm thick with hot thermoplastic road marking materials with the mechanical instruments including M&L for painting lines, dashes, arrows, letters etc on roads pavements with coloured as directed by engineer-in-charge and the like exc 10 cm wide and 1 to 2 mm thick with hot thermoplastic road marking materials with the mechanical instruments including M&L for painting lines, dashes, arrows, letters etc on roads pavements with coloured as directed by engineer-in-charge and the like exc 10 cm wide and 1 to 2 mm thick with hot thermoplastic road marking materials with the mechanical instruments including M&L for painting lines, dashes, arrows, letters etc on roads pavements with coloured as directed by engineer-in-charge and the like exc 10 cm wide and 1 to 2 mm thick with hot thermoplastic road marking materials with the mechanical instruments including M&L for painting lines, dashes, arrows, letters etc on roads pavements with coloured as directed by engineer-in-charge and the like exc 10 cm wide and 1 to 2 mm thick with hot thermoplastic road marking materials with the mechanical instruments including M&L for painting lines, dashes, arrows, letters etc on roads pavements with coloured as directed by engineer-in-charge and the like exc 10 cm wide and 1 to 2 mm thick with hot thermoplastic road marking materials with the mechanical instruments including M&L for painting lines, dashes, arrows, letters etc on roads pavements with coloured as directed by engineer-in-charge and the like exc 10 cm wide and 1 to 2 mm thick with hot thermoplastic road marking materials with the mechanical instruments including M&L for painting lines, dashes, arrows, letters etc on roads pavements with coloured as directed by engineer-in-charge and the like exc 10 cm wide and 1 to 2 mm thick with hot thermoplastic road marking materials with the mechanical instruments including M&L for painting lines, dashes, arrows, letters etc on roads pavements with coloured as directed by engineer-in-charge and the like exc 10 cm wide and 1 to 2 mm thick with hot thermoplastic road marking materials with the mechanical instruments including

5236 0 S&F of Solar Stud 125x125x25 mm made from aluminium alloy and construction, solar powered by nionocrystal solar panel. Type of battery one high capacity Ni-Cd rechargable battery, view distance approx 1000 mtrs. Leds-010mm, 3 pieces each side and total si S&F of Solar Stud 125x125x25 mm made from aluminium alloy and construction, solar powered by nionocrystal solar panel. Type of battery one high capacity Ni-Cd rechargable battery, view distance approx 1000 mtrs. Leds-010mm, 3 pieces each side and total si S&F of Solar Stud 125x125x25 mm made from aluminium alloy and construction, solar powered by nionocrystal solar panel. Type of battery one high capacity Ni-Cd rechargable battery, view distance approx 1000 mtrs. Leds-010mm, 3 pieces each side and total si 1 S&F of Solar Stud 125x125x25 mm made from aluminium alloy and construction, solar powered by nionocrystal solar panel. Type of battery one high capacity Ni-Cd rechargable battery, view distance approx 1000 mtrs. Leds-010mm, 3 pieces each side and total si S&F of Solar Stud 125x125x25 mm made from aluminium alloy and construction, solar powered by nionocrystal solar panel. Type of battery one high capacity Ni-Cd rechargable battery, view distance approx 1000 mtrs. Leds-010mm, 3 pieces each side and total si S&F of Solar Stud 125x125x25 mm made from aluminium alloy and construction, solar powered by nionocrystal solar panel. Type of battery one high capacity Ni-Cd rechargable battery, view distance approx 1000 mtrs. Leds-010mm, 3 pieces each side and total si S&F of Solar Stud 125x125x25 mm made from aluminium alloy and construction, solar powered by nionocrystal solar panel. Type of battery one high capacity Ni-Cd rechargable battery, view distance approx 1000 mtrs. Leds-010mm, 3 pieces each side and total si S&F of Solar Stud 125x125x25 mm made from aluminium alloy and construction, solar powered by nionocrystal solar panel. Type of battery one high capacity Ni-Cd rechargable battery, view distance approx 1000 mtrs. Leds-010mm, 3 pieces each side and total si S&F of Solar Stud 125x125x25 mm made from aluminium alloy and construction, solar powered by nionocrystal solar panel. Type of battery one high capacity Ni-Cd rechargable battery, view distance approx 1000 mtrs. Leds-010mm, 3 pieces each side and total si S&F of Solar Stud 125x125x25 mm made from aluminium alloy and construction, solar powered by nionocrystal solar panel. Type of battery one high capacity Ni-Cd rechargable battery, view distance approx 1000 mtrs. Leds-010mm, 3 pieces each side and total si S&F of Solar Stud 125x125x25 mm made from aluminium alloy and construction, solar powered by nionocrystal solar panel. Type of battery one high capacity Ni-Cd rechargable battery, view distance approx 1000 mtrs. Leds-010mm, 3 pieces each side and total si S&F of Solar Stud 125x125x25 mm made from aluminium alloy and construction, solar powered by nionocrystal solar panel. Type of battery one high capacity Ni-Cd rechargable battery, view distance approx 1000 mtrs. Leds-010mm, 3 pieces each side and total si S&F of Solar Stud 125x125x25 mm made from aluminium alloy and construction, solar powered by nionocrystal solar panel. Type of battery one high capacity Ni-Cd rechargable battery, view distance approx 1000 mtrs. Leds-010mm, 3 pieces each side and total si S&F of Solar Stud 125x125x25 mm made from aluminium alloy and construction, solar powered by nionocrystal solar panel. Type of battery one high capacity Ni-Cd rechargable battery, view distance approx 1000 mtrs. Leds-010mm, 3 pieces each side and total si S&F of Solar Stud 125x125x25 mm made from aluminium alloy and construction, solar powered by nionocrystal solar panel. Type of battery one high capacity Ni-Cd rechargable battery, view distance approx 1000 mtrs. Leds-010mm, 3 pieces each side and total si S&F of Solar Stud 125x125x25 mm made from aluminium alloy and construction, solar powered by nionocrystal solar panel. Type of battery one high capacity Ni-Cd rechargable battery, view distance approx 1000 mtrs. Leds-010mm, 3 pieces each side and total si S&F of Solar Stud 125x125x25 mm made from aluminium alloy and construction, solar powered by nionocrystal solar panel. Type of battery one high capacity Ni-Cd rechargable battery, view distance approx 1000 mtrs. Leds-010mm, 3 pieces each side and total si S&F of Solar Stud 125x125x25 mm made from aluminium alloy and construction, solar powered by nionocrystal solar panel. Type of battery one high capacity Ni-Cd rechargable battery, view distance approx 1000 mtrs. Leds-010mm, 3 pieces each side and total si S&F of Solar Stud 125x125x25 mm made from aluminium alloy and construction, solar powered by nionocrystal solar panel. Type of battery one high capacity Ni-Cd rechargable battery, view distance approx 1000 mtrs. Leds-010mm, 3 pieces each side and total si S&F of Solar Stud 125x125x25 mm made from aluminium alloy and construction, solar powered by nionocrystal solar panel. Type of battery one high capacity Ni-Cd rechargable battery, view distance approx 1000 mtrs. Leds-010mm, 3 pieces each side and total si S&F of Solar Stud 125x125x25 mm made from aluminium alloy and construction, solar powered by nionocrystal solar panel. Type of battery one high capacity Ni-Cd rechargable battery, view distance approx 1000 mtrs. Leds-010mm, 3 pieces each side and total si S&F of Solar Stud 125x125x25 mm made from aluminium alloy and construction, solar powered by nionocrystal solar panel. Type of battery one high capacity Ni-Cd rechargable battery, view distance approx 1000 mtrs. Leds-010mm, 3 pieces each side and total si S&F of Solar Stud 125x125x25 mm made from aluminium alloy and construction, solar powered by nionocrystal solar panel. Type of battery one high capacity Ni-Cd rechargable battery, view distance approx 1000 mtrs. Leds-010mm, 3 pieces each side and total si S&F of Solar Stud 125x125x25 mm made from aluminium alloy and construction, solar powered by nionocrystal solar panel. Type of battery one high capacity Ni-Cd rechargable battery, view distance approx 1000 mtrs. Leds-010mm, 3 pieces each side and total si S&F of Solar Stud 125x125x25 mm made from aluminium alloy and construction, solar powered by nionocrystal solar panel. Type of battery one high capacity Ni-Cd rechargable battery, view distance approx 1000 mtrs. Leds-010mm, 3 pieces each side and total si S&F of Solar Stud 125x125x25 mm made from aluminium alloy and construction, solar powered by nionocrystal solar panel. Type of battery one high capacity Ni-Cd rechargable battery, view distance approx 1000 mtrs. Leds-010mm, 3 pieces each side and total si S&F of Solar Stud 125x125x25 mm made from aluminium alloy and construction, solar powered by nionocrystal solar panel. Type of battery one high capacity Ni-Cd rechargable battery, view distance approx 1000 mtrs. Leds-010mm, 3 pieces each side and total si S&F of Solar Stud 125x125x25 mm made from aluminium alloy and construction, solar powered by nionocrystal solar panel. Type of battery one high capacity Ni-Cd rechargable battery, view distance approx 1000 mtrs. Leds-010mm, 3 pieces each side and total si S&F of Solar Stud 125x125x25 mm made from aluminium alloy and construction, solar powered by nionocrystal solar panel. Type of battery one high capacity Ni-Cd rechargable battery, view distance approx 1000 mtrs. Leds-010mm, 3 pieces each side and total si S&F of Solar Stud 125x125x25 mm made from aluminium alloy and construction, solar powered by nionocrystal solar panel. Type of battery one high capacity Ni-Cd rechargable battery, view distance approx 1000 mtrs. Leds-010mm, 3 pieces each side and total si S&F of Solar Stud 125x125x25 mm made from aluminium alloy and construction, solar powered by nionocrystal solar panel. Type of battery one high capacity Ni-Cd rechargable battery, view distance approx 1000 mtrs. Leds-010mm, 3 pieces each side and total si S&F of Solar Stud 125x125x25 mm made from aluminium alloy and construction, solar powered by nionocrystal solar panel. Type of battery one high capacity Ni-Cd rechargable battery, view distance approx 1000 mtrs. Leds-010mm, 3 pieces each side and total si S&F of Solar Stud 125x125x25 mm made from aluminium alloy and construction, solar powered by nionocrystal solar panel. Type of battery one high capacity Ni-Cd rechargable battery, view distance approx 1000 mtrs. Leds-010mm, 3 pieces each side and total si S&F of Solar Stud 125x125x25 mm made from aluminium alloy and construction, solar powered by nionocrystal solar panel. Type of battery one high capacity Ni-Cd rechargable battery, view distance approx 1000 mtrs. Leds-010mm, 3 pieces each side and total si S&F of Solar Stud 125x125x25 mm made from aluminium alloy and construction, solar powered by nionocrystal solar panel. Type of battery one high capacity Ni-Cd rechargable battery, view distance approx 1000 mtrs. Leds-010mm, 3 pieces each side and total si S&F of Solar Stud 125x125x25 mm made from aluminium alloy and construction, solar powered by nionocrystal solar panel. Type of battery one high capacity Ni-Cd rechargable battery, view distance approx 1000 mtrs. Leds-010mm, 3 pieces each side and total si S&F of Solar Stud 125x125x25 mm made from aluminium alloy and construction, solar powered by nionocrystal solar panel. Type of battery one high capacity Ni-Cd rechargable battery, view distance approx 1000 mtrs. Leds-010mm, 3 pieces each side and total si S&F of Solar Stud 125x125x25 mm made from aluminium alloy and construction, solar powered by nionocrystal solar panel. Type of battery one high capacity Ni-Cd rechargable battery, view distance approx 1000 mtrs. Leds-010mm, 3 pieces each side and total si S&F of Solar Stud 125x125x25 mm made from aluminium alloy and construction, solar powered by nionocrystal solar panel. Type of battery one high capacity Ni-Cd rechargable battery, view distance approx 1000 mtrs. Leds-010mm, 3 pieces each side and total si S&F of Solar Stud 125x125x25 mm made from aluminium alloy and construction, solar powered by nionocrystal solar panel. Type of battery one high capacity Ni-Cd rechargable battery, view distance approx 1000 mtrs. Leds-010mm, 3 pieces each side and total si S&F of Solar Stud 125x125x25 mm made from aluminium alloy and construction, solar powered by nionocrystal solar panel. Type of battery one high capacity Ni-Cd rechargable battery, view distance approx 1000 mtrs. Leds-010mm, 3 pieces each side and total si S&F of Solar Stud 125x125x25 mm made from aluminium alloy and construction, solar powered by nionocrystal solar panel. Type of battery one high capacity Ni-Cd rechargable battery, view distance approx 1000 mtrs. Leds-010mm, 3 pieces each side and total si S&F of Solar Stud 125x125x25 mm made from aluminium alloy and construction, solar powered by nionocrystal solar panel. Type of battery one high capacity Ni-Cd rechargable battery, view distance approx 1000 mtrs. Leds-010mm, 3 pieces each side and total si S&F of Solar Stud 125x125x25 mm made from aluminium alloy and construction, solar powered by nionocrystal solar panel. Type of battery one high capacity Ni-Cd rechargable battery, view distance approx 1000 mtrs. Leds-010mm, 3 pieces each side and total si 0 S&F of Solar Stud 125x125x25 mm made from aluminium alloy and construction, solar powered by nionocrystal solar panel. Type of battery one high capacity Ni-Cd rechargable battery, view distance approx 1000 mtrs. Leds-010mm, 3 pieces each side and total si 0

S&F Stainless Steel location board rectangular type of size 1.20x 0.90m , and made up of stainless steel tubes for pole of 40 mm dia framing of grade SS-304, with Stainless Steel holding support to the board with Stainless Steel ball on top of pole at 5 S&F Stainless Steel location board rectangular type of size 1.20x 0.90m , and made up of stainless steel tubes for pole of 40 mm dia framing of grade SS-304, with Stainless Steel holding support to the board with Stainless Steel ball on top of pole at 5 S&F Stainless Steel location board rectangular type of size 1.20x 0.90m , and made up of stainless steel tubes for pole of 40 mm dia framing of grade SS-304, with Stainless Steel holding support to the board with Stainless Steel ball on top of pole at 5 S&F Stainless Steel location board rectangular type of size 1.20x 0.90m , and made up of stainless steel tubes for pole of 40 mm dia framing of grade SS-304, with Stainless Steel holding support to the board with Stainless Steel ball on top of pole at 5 S&F Stainless Steel location board rectangular type of size 1.20x 0.90m , and made up of stainless steel tubes for pole of 40 mm dia framing of grade SS-304, with Stainless Steel holding support to the board with Stainless Steel ball on top of pole at 5 S&F Stainless Steel location board rectangular type of size 1.20x 0.90m , and made up of stainless steel tubes for pole of 40 mm dia framing of grade SS-304, with Stainless Steel holding support to the board with Stainless Steel ball on top of pole at 5 S&F Stainless Steel location board rectangular type of size 1.20x 0.90m , and made up of stainless steel tubes for pole of 40 mm dia framing of grade SS-304, with Stainless Steel holding support to the board with Stainless Steel ball on top of pole at 5 S&F Stainless Steel location board rectangular type of size 1.20x 0.90m , and made up of stainless steel tubes for pole of 40 mm dia framing of grade SS-304, with Stainless Steel holding support to the board with Stainless Steel ball on top of pole at 5 S&F Stainless Steel location board rectangular type of size 1.20x 0.90m , and made up of stainless steel tubes for pole of 40 mm dia framing of grade SS-304, with Stainless Steel holding support to the board with Stainless Steel ball on top of pole at 5 S&F Stainless Steel location board rectangular type of size 1.20x 0.90m , and made up of stainless steel tubes for pole of 40 mm dia framing of grade SS-304, with Stainless Steel holding support to the board with Stainless Steel ball on top of pole at 5 S&F Stainless Steel location board rectangular type of size 1.20x 0.90m , and made up of stainless steel tubes for pole of 40 mm dia framing of grade SS-304, with Stainless Steel holding support to the board with Stainless Steel ball on top of pole at 5 S&F Stainless Steel location board rectangular type of size 1.20x 0.90m , and made up of stainless steel tubes for pole of 40 mm dia framing of grade SS-304, with Stainless Steel holding support to the board with Stainless Steel ball on top of pole at 5 S&F Stainless Steel location board rectangular type of size 1.20x 0.90m , and made up of stainless steel tubes for pole of 40 mm dia framing of grade SS-304, with Stainless Steel holding support to the board with Stainless Steel ball on top of pole at 5 S&F Stainless Steel location board rectangular type of size 1.20x 0.90m , and made up of stainless steel tubes for pole of 40 mm dia framing of grade SS-304, with Stainless Steel holding support to the board with Stainless Steel ball on top of pole at 5 S&F Stainless Steel location board rectangular type of size 1.20x 0.90m , and made up of stainless steel tubes for pole of 40 mm dia framing of grade SS-304, with Stainless Steel holding support to the board with Stainless Steel ball on top of pole at 5 S&F Stainless Steel location board rectangular type of size 1.20x 0.90m , and made up of stainless steel tubes for pole of 40 mm dia framing of grade SS-304, with Stainless Steel holding support to the board with Stainless Steel ball on top of pole at 5 S&F Stainless Steel location board rectangular type of size 1.20x 0.90m , and made up of stainless steel tubes for pole of 40 mm dia framing of grade SS-304, with Stainless Steel holding support to the board with Stainless Steel ball on top of pole at 5 S&F Stainless Steel location board rectangular type of size 1.20x 0.90m , and made up of stainless steel tubes for pole of 40 mm dia framing of grade SS-304, with Stainless Steel holding support to the board with Stainless Steel ball on top of pole at 5 S&F Stainless Steel location board rectangular type of size 1.20x 0.90m , and made up of stainless steel tubes for pole of 40 mm dia framing of grade SS-304, with Stainless Steel holding support to the board with Stainless Steel ball on top of pole at 5 S&F Stainless Steel location board rectangular type of size 1.20x 0.90m , and made up of stainless steel tubes for pole of 40 mm dia framing of grade SS-304, with Stainless Steel holding support to the board with Stainless Steel ball on top of pole at 5 S&F Stainless Steel location board rectangular type of size 1.20x 0.90m , and made up of stainless steel tubes for pole of 40 mm dia framing of grade SS-304, with Stainless Steel holding support to the board with Stainless Steel ball on top of pole at 5 S&F Stainless Steel location board rectangular type of size 1.20x 0.90m , and made up of stainless steel tubes for pole of 40 mm dia framing of grade SS-304, with Stainless Steel holding support to the board with Stainless Steel ball on top of pole at 5 S&F Stainless Steel location board rectangular type of size 1.20x 0.90m , and made up of stainless steel tubes for pole of 40 mm dia framing of grade SS-304, with Stainless Steel holding support to the board with Stainless Steel ball on top of pole at 5 S&F Stainless Steel location board rectangular type of size 1.20x 0.90m , and made up of stainless steel tubes for pole of 40 mm dia framing of grade SS-304, with Stainless Steel holding support to the board with Stainless Steel ball on top of pole at 5 S&F Stainless Steel location board rectangular type of size 1.20x 0.90m , and made up of stainless steel tubes for pole of 40 mm dia framing of grade SS-304, with Stainless Steel holding support to the board with Stainless Steel ball on top of pole at 5 S&F Stainless Steel location board rectangular type of size 1.20x 0.90m , and made up of stainless steel tubes for pole of 40 mm dia framing of grade SS-304, with Stainless Steel holding support to the board with Stainless Steel ball on top of pole at 5 S&F Stainless Steel location board rectangular type of size 1.20x 0.90m , and made up of stainless steel tubes for pole of 40 mm dia framing of grade SS-304, with Stainless Steel holding support to the board with Stainless Steel ball on top of pole at 5 S&F Stainless Steel location board rectangular type of size 1.20x 0.90m , and made up of stainless steel tubes for pole of 40 mm dia framing of grade SS-304, with Stainless Steel holding support to the board with Stainless Steel ball on top of pole at 5 S&F Stainless Steel location board rectangular type of size 1.20x 0.90m , and made up of stainless steel tubes for pole of 40 mm dia framing of grade SS-304, with Stainless Steel holding support to the board with Stainless Steel ball on top of pole at 5 S&F Stainless Steel location board rectangular type of size 1.20x 0.90m , and made up of stainless steel tubes for pole of 40 mm dia framing of grade SS-304, with Stainless Steel holding support to the board with Stainless Steel ball on top of pole at 5 S&F Stainless Steel location board rectangular type of size 1.20x 0.90m , and made up of stainless steel tubes for pole of 40 mm dia framing of grade SS-304, with Stainless Steel holding support to the board with Stainless Steel ball on top of pole at 5 S&F Stainless Steel location board rectangular type of size 1.20x 0.90m , and made up of stainless steel tubes for pole of 40 mm dia framing of grade SS-304, with Stainless Steel holding support to the board with Stainless Steel ball on top of pole at 5 S&F Stainless Steel location board rectangular type of size 1.20x 0.90m , and made up of stainless steel tubes for pole of 40 mm dia framing of grade SS-304, with Stainless Steel holding support to the board with Stainless Steel ball on top of pole at 5 S&F Stainless Steel location board rectangular type of size 1.20x 0.90m , and made up of stainless steel tubes for pole of 40 mm dia framing of grade SS-304, with Stainless Steel holding support to the board with Stainless Steel ball on top of pole at 5 S&F Stainless Steel location board rectangular type of size 1.20x 0.90m , and made up of stainless steel tubes for pole of 40 mm dia framing of grade SS-304, with Stainless Steel holding support to the board with Stainless Steel ball on top of pole at 5 S&F Stainless Steel location board rectangular type of size 1.20x 0.90m , and made up of stainless steel tubes for pole of 40 mm dia framing of grade SS-304, with Stainless Steel holding support to the board with Stainless Steel ball on top of pole at 5 S&F Stainless Steel location board rectangular type of size 1.20x 0.90m , and made up of stainless steel tubes for pole of 40 mm dia framing of grade SS-304, with Stainless Steel holding support to the board with Stainless Steel ball on top of pole at 5 S&F Stainless Steel location board rectangular type of size 1.20x 0.90m , and made up of stainless steel tubes for pole of 40 mm dia framing of grade SS-304, with Stainless Steel holding support to the board with Stainless Steel ball on top of pole at 5 S&F Stainless Steel location board rectangular type of size 1.20x 0.90m , and made up of stainless steel tubes for pole of 40 mm dia framing of grade SS-304, with Stainless Steel holding support to the board with Stainless Steel ball on top of pole at 5 S&F Stainless Steel location board rectangular type of size 1.20x 0.90m , and made up of stainless steel tubes for pole of 40 mm dia framing of grade SS-304, with Stainless Steel holding support to the board with Stainless Steel ball on top of pole at 5 S&F Stainless Steel location board rectangular type of size 1.20x 0.90m , and made up of stainless steel tubes for pole of 40 mm dia framing of grade SS-304, with Stainless Steel holding support to the board with Stainless Steel ball on top of pole at 5 S&F Stainless Steel location board rectangular type of size 1.20x 0.90m , and made up of stainless steel tubes for pole of 40 mm dia framing of grade SS-304, with Stainless Steel holding support to the board with Stainless Steel ball on top of pole at 5 S&F Stainless Steel location board rectangular type of size 1.20x 0.90m , and made up of stainless steel tubes for pole of 40 mm dia framing of grade SS-304, with Stainless Steel holding support to the board with Stainless Steel ball on top of pole at 5 S&F Stainless Steel location board rectangular type of size 1.20x 0.90m , and made up of stainless steel tubes for pole of 40 mm dia framing of grade SS-304, with Stainless Steel holding support to the board with Stainless Steel ball on top of pole at 5 S&F Stainless Steel location board rectangular type of size 1.20x 0.90m , and made up of stainless steel tubes for pole of 40 mm dia framing of grade SS-304, with Stainless Steel holding support to the board with Stainless Steel ball on top of pole at 5

2 0 BOUNDARY WALL, COMPOUND WALL AND GATE 20.00 BOUNDARY WALL, COMPOUND WALL AND GATE 20.00 BOUNDARY WALL, COMPOUND WALL AND GATE 20.00 1 BOUNDARY WALL, COMPOUND WALL AND GATE 20.00 BOUNDARY WALL, COMPOUND WALL AND GATE 20.00 BOUNDARY WALL, COMPOUND WALL AND GATE 20.00 BOUNDARY WALL, COMPOUND WALL AND GATE 20.00 BOUNDARY WALL, COMPOUND WALL AND GATE 20.00 BOUNDARY WALL, COMPOUND WALL AND GATE 20.00 BOUNDARY WALL, COMPOUND WALL AND GATE 20.00 BOUNDARY WALL, COMPOUND WALL AND GATE 20.00 BOUNDARY WALL, COMPOUND WALL AND GATE 20.00 BOUNDARY WALL, COMPOUND WALL AND GATE 20.00 BOUNDARY WALL, COMPOUND WALL AND GATE 20.00 BOUNDARY WALL, COMPOUND WALL AND GATE 20.00 BOUNDARY WALL, COMPOUND WALL AND GATE 20.00 BOUNDARY WALL, COMPOUND WALL AND GATE 20.00 BOUNDARY WALL, COMPOUND WALL AND GATE 20.00 BOUNDARY WALL, COMPOUND WALL AND GATE 20.00 BOUNDARY WALL, COMPOUND WALL AND GATE 20.00 BOUNDARY WALL, COMPOUND WALL AND GATE 20.00 BOUNDARY WALL, COMPOUND WALL AND GATE 20.00 BOUNDARY WALL, COMPOUND WALL AND GATE 20.00 BOUNDARY WALL, COMPOUND WALL AND GATE 20.00 BOUNDARY WALL, COMPOUND WALL AND GATE 20.00 BOUNDARY WALL, COMPOUND WALL AND GATE 20.00 BOUNDARY WALL, COMPOUND WALL AND GATE 20.00 BOUNDARY WALL, COMPOUND WALL AND GATE 20.00 BOUNDARY WALL, COMPOUND WALL AND GATE 20.00 BOUNDARY WALL, COMPOUND WALL AND GATE 20.00 BOUNDARY WALL, COMPOUND WALL AND GATE 20.00 BOUNDARY WALL, COMPOUND WALL AND GATE 20.00 BOUNDARY WALL, COMPOUND WALL AND GATE 20.00 BOUNDARY WALL, COMPOUND WALL AND GATE 20.00 BOUNDARY WALL, COMPOUND WALL AND GATE 20.00 BOUNDARY WALL, COMPOUND WALL AND GATE 20.00 BOUNDARY WALL, COMPOUND WALL AND GATE 20.00 BOUNDARY WALL, COMPOUND WALL AND GATE 20.00 BOUNDARY WALL, COMPOUND WALL AND GATE 20.00 BOUNDARY WALL, COMPOUND WALL AND GATE 20.00 BOUNDARY WALL, COMPOUND WALL AND GATE 20.00 BOUNDARY WALL, COMPOUND WALL AND GATE 20.00 BOUNDARY WALL, COMPOUND WALL AND GATE 20.00 BOUNDARY WALL, COMPOUND WALL AND GATE 20.00 0 BOUNDARY WALL, COMPOUND WALL AND GATE 20.00 0

105.1 0 M & L for Concertina coil: 600 mm Dia/56 Loops/2.5 mm core wire. Coil Diameter: 600 mm. Type of Strip: Heavy Galvanized (IS 1730). Type of Core wire: Heavy Galvanized (IS 280-2006). Core wire Diameter: 2.50 mm Dia. Zinc Coating to Strip: Minimum 20 M & L for Concertina coil: 600 mm Dia/56 Loops/2.5 mm core wire. Coil Diameter: 600 mm. Type of Strip: Heavy Galvanized (IS 1730). Type of Core wire: Heavy Galvanized (IS 280-2006). Core wire Diameter: 2.50 mm Dia. Zinc Coating to Strip: Minimum 20 M & L for Concertina coil: 600 mm Dia/56 Loops/2.5 mm core wire. Coil Diameter: 600 mm. Type of Strip: Heavy Galvanized (IS 1730). Type of Core wire: Heavy Galvanized (IS 280-2006). Core wire Diameter: 2.50 mm Dia. Zinc Coating to Strip: Minimum 20 1 M & L for Concertina coil: 600 mm Dia/56 Loops/2.5 mm core wire. Coil Diameter: 600 mm. Type of Strip: Heavy Galvanized (IS 1730). Type of Core wire: Heavy Galvanized (IS 280-2006). Core wire Diameter: 2.50 mm Dia. Zinc Coating to Strip: Minimum 20 M & L for Concertina coil: 600 mm Dia/56 Loops/2.5 mm core wire. Coil Diameter: 600 mm. Type of Strip: Heavy Galvanized (IS 1730). Type of Core wire: Heavy Galvanized (IS 280-2006). Core wire Diameter: 2.50 mm Dia. Zinc Coating to Strip: Minimum 20 M & L for Concertina coil: 600 mm Dia/56 Loops/2.5 mm core wire. Coil Diameter: 600 mm. Type of Strip: Heavy Galvanized (IS 1730). Type of Core wire: Heavy Galvanized (IS 280-2006). Core wire Diameter: 2.50 mm Dia. Zinc Coating to Strip: Minimum 20 M & L for Concertina coil: 600 mm Dia/56 Loops/2.5 mm core wire. Coil Diameter: 600 mm. Type of Strip: Heavy Galvanized (IS 1730). Type of Core wire: Heavy Galvanized (IS 280-2006). Core wire Diameter: 2.50 mm Dia. Zinc Coating to Strip: Minimum 20 M & L for Concertina coil: 600 mm Dia/56 Loops/2.5 mm core wire. Coil Diameter: 600 mm. Type of Strip: Heavy Galvanized (IS 1730). Type of Core wire: Heavy Galvanized (IS 280-2006). Core wire Diameter: 2.50 mm Dia. Zinc Coating to Strip: Minimum 20 M & L for Concertina coil: 600 mm Dia/56 Loops/2.5 mm core wire. Coil Diameter: 600 mm. Type of Strip: Heavy Galvanized (IS 1730). Type of Core wire: Heavy Galvanized (IS 280-2006). Core wire Diameter: 2.50 mm Dia. Zinc Coating to Strip: Minimum 20 M & L for Concertina coil: 600 mm Dia/56 Loops/2.5 mm core wire. Coil Diameter: 600 mm. Type of Strip: Heavy Galvanized (IS 1730). Type of Core wire: Heavy Galvanized (IS 280-2006). Core wire Diameter: 2.50 mm Dia. Zinc Coating to Strip: Minimum 20 M & L for Concertina coil: 600 mm Dia/56 Loops/2.5 mm core wire. Coil Diameter: 600 mm. Type of Strip: Heavy Galvanized (IS 1730). Type of Core wire: Heavy Galvanized (IS 280-2006). Core wire Diameter: 2.50 mm Dia. Zinc Coating to Strip: Minimum 20 M & L for Concertina coil: 600 mm Dia/56 Loops/2.5 mm core wire. Coil Diameter: 600 mm. Type of Strip: Heavy Galvanized (IS 1730). Type of Core wire: Heavy Galvanized (IS 280-2006). Core wire Diameter: 2.50 mm Dia. Zinc Coating to Strip: Minimum 20 M & L for Concertina coil: 600 mm Dia/56 Loops/2.5 mm core wire. Coil Diameter: 600 mm. Type of Strip: Heavy Galvanized (IS 1730). Type of Core wire: Heavy Galvanized (IS 280-2006). Core wire Diameter: 2.50 mm Dia. Zinc Coating to Strip: Minimum 20 M & L for Concertina coil: 600 mm Dia/56 Loops/2.5 mm core wire. Coil Diameter: 600 mm. Type of Strip: Heavy Galvanized (IS 1730). Type of Core wire: Heavy Galvanized (IS 280-2006). Core wire Diameter: 2.50 mm Dia. Zinc Coating to Strip: Minimum 20 M & L for Concertina coil: 600 mm Dia/56 Loops/2.5 mm core wire. Coil Diameter: 600 mm. Type of Strip: Heavy Galvanized (IS 1730). Type of Core wire: Heavy Galvanized (IS 280-2006). Core wire Diameter: 2.50 mm Dia. Zinc Coating to Strip: Minimum 20 M & L for Concertina coil: 600 mm Dia/56 Loops/2.5 mm core wire. Coil Diameter: 600 mm. Type of Strip: Heavy Galvanized (IS 1730). Type of Core wire: Heavy Galvanized (IS 280-2006). Core wire Diameter: 2.50 mm Dia. Zinc Coating to Strip: Minimum 20 M & L for Concertina coil: 600 mm Dia/56 Loops/2.5 mm core wire. Coil Diameter: 600 mm. Type of Strip: Heavy Galvanized (IS 1730). Type of Core wire: Heavy Galvanized (IS 280-2006). Core wire Diameter: 2.50 mm Dia. Zinc Coating to Strip: Minimum 20 M & L for Concertina coil: 600 mm Dia/56 Loops/2.5 mm core wire. Coil Diameter: 600 mm. Type of Strip: Heavy Galvanized (IS 1730). Type of Core wire: Heavy Galvanized (IS 280-2006). Core wire Diameter: 2.50 mm Dia. Zinc Coating to Strip: Minimum 20 M & L for Concertina coil: 600 mm Dia/56 Loops/2.5 mm core wire. Coil Diameter: 600 mm. Type of Strip: Heavy Galvanized (IS 1730). Type of Core wire: Heavy Galvanized (IS 280-2006). Core wire Diameter: 2.50 mm Dia. Zinc Coating to Strip: Minimum 20 M & L for Concertina coil: 600 mm Dia/56 Loops/2.5 mm core wire. Coil Diameter: 600 mm. Type of Strip: Heavy Galvanized (IS 1730). Type of Core wire: Heavy Galvanized (IS 280-2006). Core wire Diameter: 2.50 mm Dia. Zinc Coating to Strip: Minimum 20 M & L for Concertina coil: 600 mm Dia/56 Loops/2.5 mm core wire. Coil Diameter: 600 mm. Type of Strip: Heavy Galvanized (IS 1730). Type of Core wire: Heavy Galvanized (IS 280-2006). Core wire Diameter: 2.50 mm Dia. Zinc Coating to Strip: Minimum 20 M & L for Concertina coil: 600 mm Dia/56 Loops/2.5 mm core wire. Coil Diameter: 600 mm. Type of Strip: Heavy Galvanized (IS 1730). Type of Core wire: Heavy Galvanized (IS 280-2006). Core wire Diameter: 2.50 mm Dia. Zinc Coating to Strip: Minimum 20 M & L for Concertina coil: 600 mm Dia/56 Loops/2.5 mm core wire. Coil Diameter: 600 mm. Type of Strip: Heavy Galvanized (IS 1730). Type of Core wire: Heavy Galvanized (IS 280-2006). Core wire Diameter: 2.50 mm Dia. Zinc Coating to Strip: Minimum 20 M & L for Concertina coil: 600 mm Dia/56 Loops/2.5 mm core wire. Coil Diameter: 600 mm. Type of Strip: Heavy Galvanized (IS 1730). Type of Core wire: Heavy Galvanized (IS 280-2006). Core wire Diameter: 2.50 mm Dia. Zinc Coating to Strip: Minimum 20 M & L for Concertina coil: 600 mm Dia/56 Loops/2.5 mm core wire. Coil Diameter: 600 mm. Type of Strip: Heavy Galvanized (IS 1730). Type of Core wire: Heavy Galvanized (IS 280-2006). Core wire Diameter: 2.50 mm Dia. Zinc Coating to Strip: Minimum 20 M & L for Concertina coil: 600 mm Dia/56 Loops/2.5 mm core wire. Coil Diameter: 600 mm. Type of Strip: Heavy Galvanized (IS 1730). Type of Core wire: Heavy Galvanized (IS 280-2006). Core wire Diameter: 2.50 mm Dia. Zinc Coating to Strip: Minimum 20 M & L for Concertina coil: 600 mm Dia/56 Loops/2.5 mm core wire. Coil Diameter: 600 mm. Type of Strip: Heavy Galvanized (IS 1730). Type of Core wire: Heavy Galvanized (IS 280-2006). Core wire Diameter: 2.50 mm Dia. Zinc Coating to Strip: Minimum 20 M & L for Concertina coil: 600 mm Dia/56 Loops/2.5 mm core wire. Coil Diameter: 600 mm. Type of Strip: Heavy Galvanized (IS 1730). Type of Core wire: Heavy Galvanized (IS 280-2006). Core wire Diameter: 2.50 mm Dia. Zinc Coating to Strip: Minimum 20 M & L for Concertina coil: 600 mm Dia/56 Loops/2.5 mm core wire. Coil Diameter: 600 mm. Type of Strip: Heavy Galvanized (IS 1730). Type of Core wire: Heavy Galvanized (IS 280-2006). Core wire Diameter: 2.50 mm Dia. Zinc Coating to Strip: Minimum 20 M & L for Concertina coil: 600 mm Dia/56 Loops/2.5 mm core wire. Coil Diameter: 600 mm. Type of Strip: Heavy Galvanized (IS 1730). Type of Core wire: Heavy Galvanized (IS 280-2006). Core wire Diameter: 2.50 mm Dia. Zinc Coating to Strip: Minimum 20 M & L for Concertina coil: 600 mm Dia/56 Loops/2.5 mm core wire. Coil Diameter: 600 mm. Type of Strip: Heavy Galvanized (IS 1730). Type of Core wire: Heavy Galvanized (IS 280-2006). Core wire Diameter: 2.50 mm Dia. Zinc Coating to Strip: Minimum 20 M & L for Concertina coil: 600 mm Dia/56 Loops/2.5 mm core wire. Coil Diameter: 600 mm. Type of Strip: Heavy Galvanized (IS 1730). Type of Core wire: Heavy Galvanized (IS 280-2006). Core wire Diameter: 2.50 mm Dia. Zinc Coating to Strip: Minimum 20 M & L for Concertina coil: 600 mm Dia/56 Loops/2.5 mm core wire. Coil Diameter: 600 mm. Type of Strip: Heavy Galvanized (IS 1730). Type of Core wire: Heavy Galvanized (IS 280-2006). Core wire Diameter: 2.50 mm Dia. Zinc Coating to Strip: Minimum 20 M & L for Concertina coil: 600 mm Dia/56 Loops/2.5 mm core wire. Coil Diameter: 600 mm. Type of Strip: Heavy Galvanized (IS 1730). Type of Core wire: Heavy Galvanized (IS 280-2006). Core wire Diameter: 2.50 mm Dia. Zinc Coating to Strip: Minimum 20 M & L for Concertina coil: 600 mm Dia/56 Loops/2.5 mm core wire. Coil Diameter: 600 mm. Type of Strip: Heavy Galvanized (IS 1730). Type of Core wire: Heavy Galvanized (IS 280-2006). Core wire Diameter: 2.50 mm Dia. Zinc Coating to Strip: Minimum 20 M & L for Concertina coil: 600 mm Dia/56 Loops/2.5 mm core wire. Coil Diameter: 600 mm. Type of Strip: Heavy Galvanized (IS 1730). Type of Core wire: Heavy Galvanized (IS 280-2006). Core wire Diameter: 2.50 mm Dia. Zinc Coating to Strip: Minimum 20 M & L for Concertina coil: 600 mm Dia/56 Loops/2.5 mm core wire. Coil Diameter: 600 mm. Type of Strip: Heavy Galvanized (IS 1730). Type of Core wire: Heavy Galvanized (IS 280-2006). Core wire Diameter: 2.50 mm Dia. Zinc Coating to Strip: Minimum 20 M & L for Concertina coil: 600 mm Dia/56 Loops/2.5 mm core wire. Coil Diameter: 600 mm. Type of Strip: Heavy Galvanized (IS 1730). Type of Core wire: Heavy Galvanized (IS 280-2006). Core wire Diameter: 2.50 mm Dia. Zinc Coating to Strip: Minimum 20 M & L for Concertina coil: 600 mm Dia/56 Loops/2.5 mm core wire. Coil Diameter: 600 mm. Type of Strip: Heavy Galvanized (IS 1730). Type of Core wire: Heavy Galvanized (IS 280-2006). Core wire Diameter: 2.50 mm Dia. Zinc Coating to Strip: Minimum 20 M & L for Concertina coil: 600 mm Dia/56 Loops/2.5 mm core wire. Coil Diameter: 600 mm. Type of Strip: Heavy Galvanized (IS 1730). Type of Core wire: Heavy Galvanized (IS 280-2006). Core wire Diameter: 2.50 mm Dia. Zinc Coating to Strip: Minimum 20 M & L for Concertina coil: 600 mm Dia/56 Loops/2.5 mm core wire. Coil Diameter: 600 mm. Type of Strip: Heavy Galvanized (IS 1730). Type of Core wire: Heavy Galvanized (IS 280-2006). Core wire Diameter: 2.50 mm Dia. Zinc Coating to Strip: Minimum 20 M & L for Concertina coil: 600 mm Dia/56 Loops/2.5 mm core wire. Coil Diameter: 600 mm. Type of Strip: Heavy Galvanized (IS 1730). Type of Core wire: Heavy Galvanized (IS 280-2006). Core wire Diameter: 2.50 mm Dia. Zinc Coating to Strip: Minimum 20 M & L for Concertina coil: 600 mm Dia/56 Loops/2.5 mm core wire. Coil Diameter: 600 mm. Type of Strip: Heavy Galvanized (IS 1730). Type of Core wire: Heavy Galvanized (IS 280-2006). Core wire Diameter: 2.50 mm Dia. Zinc Coating to Strip: Minimum 20 M & L for Concertina coil: 600 mm Dia/56 Loops/2.5 mm core wire. Coil Diameter: 600 mm. Type of Strip: Heavy Galvanized (IS 1730). Type of Core wire: Heavy Galvanized (IS 280-2006). Core wire Diameter: 2.50 mm Dia. Zinc Coating to Strip: Minimum 20 0 M & L for Concertina coil: 600 mm Dia/56 Loops/2.5 mm core wire. Coil Diameter: 600 mm. Type of Strip: Heavy Galvanized (IS 1730). Type of Core wire: Heavy Galvanized (IS 280-2006). Core wire Diameter: 2.50 mm Dia. Zinc Coating to Strip: Minimum 20 0

24 0 RAIN WATER HARVESTING 21.00 RAIN WATER HARVESTING 21.00 RAIN WATER HARVESTING 21.00 1 RAIN WATER HARVESTING 21.00 RAIN WATER HARVESTING 21.00 RAIN WATER HARVESTING 21.00 RAIN WATER HARVESTING 21.00 RAIN WATER HARVESTING 21.00 RAIN WATER HARVESTING 21.00 RAIN WATER HARVESTING 21.00 RAIN WATER HARVESTING 21.00 RAIN WATER HARVESTING 21.00 RAIN WATER HARVESTING 21.00 RAIN WATER HARVESTING 21.00 RAIN WATER HARVESTING 21.00 RAIN WATER HARVESTING 21.00 RAIN WATER HARVESTING 21.00 RAIN WATER HARVESTING 21.00 RAIN WATER HARVESTING 21.00 RAIN WATER HARVESTING 21.00 RAIN WATER HARVESTING 21.00 RAIN WATER HARVESTING 21.00 RAIN WATER HARVESTING 21.00 RAIN WATER HARVESTING 21.00 RAIN WATER HARVESTING 21.00 RAIN WATER HARVESTING 21.00 RAIN WATER HARVESTING 21.00 RAIN WATER HARVESTING 21.00 RAIN WATER HARVESTING 21.00 RAIN WATER HARVESTING 21.00 RAIN WATER HARVESTING 21.00 RAIN WATER HARVESTING 21.00 RAIN WATER HARVESTING 21.00 RAIN WATER HARVESTING 21.00 RAIN WATER HARVESTING 21.00 RAIN WATER HARVESTING 21.00 RAIN WATER HARVESTING 21.00 RAIN WATER HARVESTING 21.00 RAIN WATER HARVESTING 21.00 RAIN WATER HARVESTING 21.00 RAIN WATER HARVESTING 21.00 RAIN WATER HARVESTING 21.00 RAIN WATER HARVESTING 21.00 RAIN WATER HARVESTING 21.00 0 RAIN WATER HARVESTING 21.00 0

Construction of underground Rain water Harvesting Pit complete all as specified and directed. 21.01 Construction of underground Rain water Harvesting Pit complete all as specified and directed. 21.01 Construction of underground Rain water Harvesting Pit complete all as specified and directed. 21.01 Construction of underground Rain water Harvesting Pit complete all as specified and directed. 21.01 Construction of underground Rain water Harvesting Pit complete all as specified and directed. 21.01 Construction of underground Rain water Harvesting Pit complete all as specified and directed. 21.01 Construction of underground Rain water Harvesting Pit complete all as specified and directed. 21.01 Construction of underground Rain water Harvesting Pit complete all as specified and directed. 21.01 Construction of underground Rain water Harvesting Pit complete all as specified and directed. 21.01 Construction of underground Rain water Harvesting Pit complete all as specified and directed. 21.01 Construction of underground Rain water Harvesting Pit complete all as specified and directed. 21.01 Construction of underground Rain water Harvesting Pit complete all as specified and directed. 21.01 Construction of underground Rain water Harvesting Pit complete all as specified and directed. 21.01 Construction of underground Rain water Harvesting Pit complete all as specified and directed. 21.01 Construction of underground Rain water Harvesting Pit complete all as specified and directed. 21.01 Construction of underground Rain water Harvesting Pit complete all as specified and directed. 21.01 Construction of underground Rain water Harvesting Pit complete all as specified and directed. 21.01 Construction of underground Rain water Harvesting Pit complete all as specified and directed. 21.01 Construction of underground Rain water Harvesting Pit complete all as specified and directed. 21.01 Construction of underground Rain water Harvesting Pit complete all as specified and directed. 21.01 Construction of underground Rain water Harvesting Pit complete all as specified and directed. 21.01 Construction of underground Rain water Harvesting Pit complete all as specified and directed. 21.01 Construction of underground Rain water Harvesting Pit complete all as specified and directed. 21.01 Construction of underground Rain water Harvesting Pit complete all as specified and directed. 21.01 Construction of underground Rain water Harvesting Pit complete all as specified and directed. 21.01 Construction of underground Rain water Harvesting Pit complete all as specified and directed. 21.01 Construction of underground Rain water Harvesting Pit complete all as specified and directed. 21.01 Construction of underground Rain water Harvesting Pit complete all as specified and directed. 21.01 Construction of underground Rain water Harvesting Pit complete all as specified and directed. 21.01 Construction of underground Rain water Harvesting Pit complete all as specified and directed. 21.01 Construction of underground Rain water Harvesting Pit complete all as specified and directed. 21.01 Construction of underground Rain water Harvesting Pit complete all as specified and directed. 21.01 Construction of underground Rain water Harvesting Pit complete all as specified and directed. 21.01 Construction of underground Rain water Harvesting Pit complete all as specified and directed. 21.01 Construction of underground Rain water Harvesting Pit complete all as specified and directed. 21.01 Construction of underground Rain water Harvesting Pit complete all as specified and directed. 21.01 Construction of underground Rain water Harvesting Pit complete all as specified and directed. 21.01 Construction of underground Rain water Harvesting Pit complete all as specified and directed. 21.01 Construction of underground Rain water Harvesting Pit complete all as specified and directed. 21.01 Construction of underground Rain water Harvesting Pit complete all as specified and directed. 21.01 Construction of underground Rain water Harvesting Pit complete all as specified and directed. 21.01 Construction of underground Rain water Harvesting Pit complete all as specified and directed. 21.01 Construction of underground Rain water Harvesting Pit complete all as specified and directed. 21.01 Construction of underground Rain water Harvesting Pit complete all as specified and directed. 21.01 Construction of underground Rain water Harvesting Pit complete all as specified and directed. 21.01

257 0 M&L for vertical bore hole by rotary cum through direct hammering(DTH) technique in any type of strata consisting of 200mm dia drill bit from GL upto a depth as directed and getting out and disposal of spoil to a distance n.exc 250m complete all as specif M&L for vertical bore hole by rotary cum through direct hammering(DTH) technique in any type of strata consisting of 200mm dia drill bit from GL upto a depth as directed and getting out and disposal of spoil to a distance n.exc 250m complete all as specif M&L for vertical bore hole by rotary cum through direct hammering(DTH) technique in any type of strata consisting of 200mm dia drill bit from GL upto a depth as directed and getting out and disposal of spoil to a distance n.exc 250m complete all as specif 1 M&L for vertical bore hole by rotary cum through direct hammering(DTH) technique in any type of strata consisting of 200mm dia drill bit from GL upto a depth as directed and getting out and disposal of spoil to a distance n.exc 250m complete all as specif M&L for vertical bore hole by rotary cum through direct hammering(DTH) technique in any type of strata consisting of 200mm dia drill bit from GL upto a depth as directed and getting out and disposal of spoil to a distance n.exc 250m complete all as specif M&L for vertical bore hole by rotary cum through direct hammering(DTH) technique in any type of strata consisting of 200mm dia drill bit from GL upto a depth as directed and getting out and disposal of spoil to a distance n.exc 250m complete all as specif M&L for vertical bore hole by rotary cum through direct hammering(DTH) technique in any type of strata consisting of 200mm dia drill bit from GL upto a depth as directed and getting out and disposal of spoil to a distance n.exc 250m complete all as specif M&L for vertical bore hole by rotary cum through direct hammering(DTH) technique in any type of strata consisting of 200mm dia drill bit from GL upto a depth as directed and getting out and disposal of spoil to a distance n.exc 250m complete all as specif M&L for vertical bore hole by rotary cum through direct hammering(DTH) technique in any type of strata consisting of 200mm dia drill bit from GL upto a depth as directed and getting out and disposal of spoil to a distance n.exc 250m complete all as specif M&L for vertical bore hole by rotary cum through direct hammering(DTH) technique in any type of strata consisting of 200mm dia drill bit from GL upto a depth as directed and getting out and disposal of spoil to a distance n.exc 250m complete all as specif M&L for vertical bore hole by rotary cum through direct hammering(DTH) technique in any type of strata consisting of 200mm dia drill bit from GL upto a depth as directed and getting out and disposal of spoil to a distance n.exc 250m complete all as specif M&L for vertical bore hole by rotary cum through direct hammering(DTH) technique in any type of strata consisting of 200mm dia drill bit from GL upto a depth as directed and getting out and disposal of spoil to a distance n.exc 250m complete all as specif M&L for vertical bore hole by rotary cum through direct hammering(DTH) technique in any type of strata consisting of 200mm dia drill bit from GL upto a depth as directed and getting out and disposal of spoil to a distance n.exc 250m complete all as specif M&L for vertical bore hole by rotary cum through direct hammering(DTH) technique in any type of strata consisting of 200mm dia drill bit from GL upto a depth as directed and getting out and disposal of spoil to a distance n.exc 250m complete all as specif M&L for vertical bore hole by rotary cum through direct hammering(DTH) technique in any type of strata consisting of 200mm dia drill bit from GL upto a depth as directed and getting out and disposal of spoil to a distance n.exc 250m complete all as specif M&L for vertical bore hole by rotary cum through direct hammering(DTH) technique in any type of strata consisting of 200mm dia drill bit from GL upto a depth as directed and getting out and disposal of spoil to a distance n.exc 250m complete all as specif M&L for vertical bore hole by rotary cum through direct hammering(DTH) technique in any type of strata consisting of 200mm dia drill bit from GL upto a depth as directed and getting out and disposal of spoil to a distance n.exc 250m complete all as specif M&L for vertical bore hole by rotary cum through direct hammering(DTH) technique in any type of strata consisting of 200mm dia drill bit from GL upto a depth as directed and getting out and disposal of spoil to a distance n.exc 250m complete all as specif M&L for vertical bore hole by rotary cum through direct hammering(DTH) technique in any type of strata consisting of 200mm dia drill bit from GL upto a depth as directed and getting out and disposal of spoil to a distance n.exc 250m complete all as specif M&L for vertical bore hole by rotary cum through direct hammering(DTH) technique in any type of strata consisting of 200mm dia drill bit from GL upto a depth as directed and getting out and disposal of spoil to a distance n.exc 250m complete all as specif M&L for vertical bore hole by rotary cum through direct hammering(DTH) technique in any type of strata consisting of 200mm dia drill bit from GL upto a depth as directed and getting out and disposal of spoil to a distance n.exc 250m complete all as specif M&L for vertical bore hole by rotary cum through direct hammering(DTH) technique in any type of strata consisting of 200mm dia drill bit from GL upto a depth as directed and getting out and disposal of spoil to a distance n.exc 250m complete all as specif M&L for vertical bore hole by rotary cum through direct hammering(DTH) technique in any type of strata consisting of 200mm dia drill bit from GL upto a depth as directed and getting out and disposal of spoil to a distance n.exc 250m complete all as specif M&L for vertical bore hole by rotary cum through direct hammering(DTH) technique in any type of strata consisting of 200mm dia drill bit from GL upto a depth as directed and getting out and disposal of spoil to a distance n.exc 250m complete all as specif M&L for vertical bore hole by rotary cum through direct hammering(DTH) technique in any type of strata consisting of 200mm dia drill bit from GL upto a depth as directed and getting out and disposal of spoil to a distance n.exc 250m complete all as specif M&L for vertical bore hole by rotary cum through direct hammering(DTH) technique in any type of strata consisting of 200mm dia drill bit from GL upto a depth as directed and getting out and disposal of spoil to a distance n.exc 250m complete all as specif M&L for vertical bore hole by rotary cum through direct hammering(DTH) technique in any type of strata consisting of 200mm dia drill bit from GL upto a depth as directed and getting out and disposal of spoil to a distance n.exc 250m complete all as specif M&L for vertical bore hole by rotary cum through direct hammering(DTH) technique in any type of strata consisting of 200mm dia drill bit from GL upto a depth as directed and getting out and disposal of spoil to a distance n.exc 250m complete all as specif M&L for vertical bore hole by rotary cum through direct hammering(DTH) technique in any type of strata consisting of 200mm dia drill bit from GL upto a depth as directed and getting out and disposal of spoil to a distance n.exc 250m complete all as specif M&L for vertical bore hole by rotary cum through direct hammering(DTH) technique in any type of strata consisting of 200mm dia drill bit from GL upto a depth as directed and getting out and disposal of spoil to a distance n.exc 250m complete all as specif M&L for vertical bore hole by rotary cum through direct hammering(DTH) technique in any type of strata consisting of 200mm dia drill bit from GL upto a depth as directed and getting out and disposal of spoil to a distance n.exc 250m complete all as specif M&L for vertical bore hole by rotary cum through direct hammering(DTH) technique in any type of strata consisting of 200mm dia drill bit from GL upto a depth as directed and getting out and disposal of spoil to a distance n.exc 250m complete all as specif M&L for vertical bore hole by rotary cum through direct hammering(DTH) technique in any type of strata consisting of 200mm dia drill bit from GL upto a depth as directed and getting out and disposal of spoil to a distance n.exc 250m complete all as specif M&L for vertical bore hole by rotary cum through direct hammering(DTH) technique in any type of strata consisting of 200mm dia drill bit from GL upto a depth as directed and getting out and disposal of spoil to a distance n.exc 250m complete all as specif M&L for vertical bore hole by rotary cum through direct hammering(DTH) technique in any type of strata consisting of 200mm dia drill bit from GL upto a depth as directed and getting out and disposal of spoil to a distance n.exc 250m complete all as specif M&L for vertical bore hole by rotary cum through direct hammering(DTH) technique in any type of strata consisting of 200mm dia drill bit from GL upto a depth as directed and getting out and disposal of spoil to a distance n.exc 250m complete all as specif M&L for vertical bore hole by rotary cum through direct hammering(DTH) technique in any type of strata consisting of 200mm dia drill bit from GL upto a depth as directed and getting out and disposal of spoil to a distance n.exc 250m complete all as specif M&L for vertical bore hole by rotary cum through direct hammering(DTH) technique in any type of strata consisting of 200mm dia drill bit from GL upto a depth as directed and getting out and disposal of spoil to a distance n.exc 250m complete all as specif M&L for vertical bore hole by rotary cum through direct hammering(DTH) technique in any type of strata consisting of 200mm dia drill bit from GL upto a depth as directed and getting out and disposal of spoil to a distance n.exc 250m complete all as specif M&L for vertical bore hole by rotary cum through direct hammering(DTH) technique in any type of strata consisting of 200mm dia drill bit from GL upto a depth as directed and getting out and disposal of spoil to a distance n.exc 250m complete all as specif M&L for vertical bore hole by rotary cum through direct hammering(DTH) technique in any type of strata consisting of 200mm dia drill bit from GL upto a depth as directed and getting out and disposal of spoil to a distance n.exc 250m complete all as specif M&L for vertical bore hole by rotary cum through direct hammering(DTH) technique in any type of strata consisting of 200mm dia drill bit from GL upto a depth as directed and getting out and disposal of spoil to a distance n.exc 250m complete all as specif M&L for vertical bore hole by rotary cum through direct hammering(DTH) technique in any type of strata consisting of 200mm dia drill bit from GL upto a depth as directed and getting out and disposal of spoil to a distance n.exc 250m complete all as specif M&L for vertical bore hole by rotary cum through direct hammering(DTH) technique in any type of strata consisting of 200mm dia drill bit from GL upto a depth as directed and getting out and disposal of spoil to a distance n.exc 250m complete all as specif 0 M&L for vertical bore hole by rotary cum through direct hammering(DTH) technique in any type of strata consisting of 200mm dia drill bit from GL upto a depth as directed and getting out and disposal of spoil to a distance n.exc 250m complete all as specif 0

1 0 S&F PVC pipes 160mm bore of pressure rating 10 kgf/Sqm class 5 incl socket etc including lowering complete. 21.03 S&F PVC pipes 160mm bore of pressure rating 10 kgf/Sqm class 5 incl socket etc including lowering complete. 21.03 S&F PVC pipes 160mm bore of pressure rating 10 kgf/Sqm class 5 incl socket etc including lowering complete. 21.03 1 S&F PVC pipes 160mm bore of pressure rating 10 kgf/Sqm class 5 incl socket etc including lowering complete. 21.03 S&F PVC pipes 160mm bore of pressure rating 10 kgf/Sqm class 5 incl socket etc including lowering complete. 21.03 S&F PVC pipes 160mm bore of pressure rating 10 kgf/Sqm class 5 incl socket etc including lowering complete. 21.03 S&F PVC pipes 160mm bore of pressure rating 10 kgf/Sqm class 5 incl socket etc including lowering complete. 21.03 S&F PVC pipes 160mm bore of pressure rating 10 kgf/Sqm class 5 incl socket etc including lowering complete. 21.03 S&F PVC pipes 160mm bore of pressure rating 10 kgf/Sqm class 5 incl socket etc including lowering complete. 21.03 S&F PVC pipes 160mm bore of pressure rating 10 kgf/Sqm class 5 incl socket etc including lowering complete. 21.03 S&F PVC pipes 160mm bore of pressure rating 10 kgf/Sqm class 5 incl socket etc including lowering complete. 21.03 S&F PVC pipes 160mm bore of pressure rating 10 kgf/Sqm class 5 incl socket etc including lowering complete. 21.03 S&F PVC pipes 160mm bore of pressure rating 10 kgf/Sqm class 5 incl socket etc including lowering complete. 21.03 S&F PVC pipes 160mm bore of pressure rating 10 kgf/Sqm class 5 incl socket etc including lowering complete. 21.03 S&F PVC pipes 160mm bore of pressure rating 10 kgf/Sqm class 5 incl socket etc including lowering complete. 21.03 S&F PVC pipes 160mm bore of pressure rating 10 kgf/Sqm class 5 incl socket etc including lowering complete. 21.03 S&F PVC pipes 160mm bore of pressure rating 10 kgf/Sqm class 5 incl socket etc including lowering complete. 21.03 S&F PVC pipes 160mm bore of pressure rating 10 kgf/Sqm class 5 incl socket etc including lowering complete. 21.03 S&F PVC pipes 160mm bore of pressure rating 10 kgf/Sqm class 5 incl socket etc including lowering complete. 21.03 S&F PVC pipes 160mm bore of pressure rating 10 kgf/Sqm class 5 incl socket etc including lowering complete. 21.03 S&F PVC pipes 160mm bore of pressure rating 10 kgf/Sqm class 5 incl socket etc including lowering complete. 21.03 S&F PVC pipes 160mm bore of pressure rating 10 kgf/Sqm class 5 incl socket etc including lowering complete. 21.03 S&F PVC pipes 160mm bore of pressure rating 10 kgf/Sqm class 5 incl socket etc including lowering complete. 21.03 S&F PVC pipes 160mm bore of pressure rating 10 kgf/Sqm class 5 incl socket etc including lowering complete. 21.03 S&F PVC pipes 160mm bore of pressure rating 10 kgf/Sqm class 5 incl socket etc including lowering complete. 21.03 S&F PVC pipes 160mm bore of pressure rating 10 kgf/Sqm class 5 incl socket etc including lowering complete. 21.03 S&F PVC pipes 160mm bore of pressure rating 10 kgf/Sqm class 5 incl socket etc including lowering complete. 21.03 S&F PVC pipes 160mm bore of pressure rating 10 kgf/Sqm class 5 incl socket etc including lowering complete. 21.03 S&F PVC pipes 160mm bore of pressure rating 10 kgf/Sqm class 5 incl socket etc including lowering complete. 21.03 S&F PVC pipes 160mm bore of pressure rating 10 kgf/Sqm class 5 incl socket etc including lowering complete. 21.03 S&F PVC pipes 160mm bore of pressure rating 10 kgf/Sqm class 5 incl socket etc including lowering complete. 21.03 S&F PVC pipes 160mm bore of pressure rating 10 kgf/Sqm class 5 incl socket etc including lowering complete. 21.03 S&F PVC pipes 160mm bore of pressure rating 10 kgf/Sqm class 5 incl socket etc including lowering complete. 21.03 S&F PVC pipes 160mm bore of pressure rating 10 kgf/Sqm class 5 incl socket etc including lowering complete. 21.03 S&F PVC pipes 160mm bore of pressure rating 10 kgf/Sqm class 5 incl socket etc including lowering complete. 21.03 S&F PVC pipes 160mm bore of pressure rating 10 kgf/Sqm class 5 incl socket etc including lowering complete. 21.03 S&F PVC pipes 160mm bore of pressure rating 10 kgf/Sqm class 5 incl socket etc including lowering complete. 21.03 S&F PVC pipes 160mm bore of pressure rating 10 kgf/Sqm class 5 incl socket etc including lowering complete. 21.03 S&F PVC pipes 160mm bore of pressure rating 10 kgf/Sqm class 5 incl socket etc including lowering complete. 21.03 S&F PVC pipes 160mm bore of pressure rating 10 kgf/Sqm class 5 incl socket etc including lowering complete. 21.03 S&F PVC pipes 160mm bore of pressure rating 10 kgf/Sqm class 5 incl socket etc including lowering complete. 21.03 S&F PVC pipes 160mm bore of pressure rating 10 kgf/Sqm class 5 incl socket etc including lowering complete. 21.03 S&F PVC pipes 160mm bore of pressure rating 10 kgf/Sqm class 5 incl socket etc including lowering complete. 21.03 S&F PVC pipes 160mm bore of pressure rating 10 kgf/Sqm class 5 incl socket etc including lowering complete. 21.03 0 S&F PVC pipes 160mm bore of pressure rating 10 kgf/Sqm class 5 incl socket etc including lowering complete. 21.03 0

4 0 S&F slotted PVC pipes 160mm bore of pressure rating 10 kgf/Sqm class 5 incl socket etc including lowering complete. 21.04 S&F slotted PVC pipes 160mm bore of pressure rating 10 kgf/Sqm class 5 incl socket etc including lowering complete. 21.04 S&F slotted PVC pipes 160mm bore of pressure rating 10 kgf/Sqm class 5 incl socket etc including lowering complete. 21.04 1 S&F slotted PVC pipes 160mm bore of pressure rating 10 kgf/Sqm class 5 incl socket etc including lowering complete. 21.04 S&F slotted PVC pipes 160mm bore of pressure rating 10 kgf/Sqm class 5 incl socket etc including lowering complete. 21.04 S&F slotted PVC pipes 160mm bore of pressure rating 10 kgf/Sqm class 5 incl socket etc including lowering complete. 21.04 S&F slotted PVC pipes 160mm bore of pressure rating 10 kgf/Sqm class 5 incl socket etc including lowering complete. 21.04 S&F slotted PVC pipes 160mm bore of pressure rating 10 kgf/Sqm class 5 incl socket etc including lowering complete. 21.04 S&F slotted PVC pipes 160mm bore of pressure rating 10 kgf/Sqm class 5 incl socket etc including lowering complete. 21.04 S&F slotted PVC pipes 160mm bore of pressure rating 10 kgf/Sqm class 5 incl socket etc including lowering complete. 21.04 S&F slotted PVC pipes 160mm bore of pressure rating 10 kgf/Sqm class 5 incl socket etc including lowering complete. 21.04 S&F slotted PVC pipes 160mm bore of pressure rating 10 kgf/Sqm class 5 incl socket etc including lowering complete. 21.04 S&F slotted PVC pipes 160mm bore of pressure rating 10 kgf/Sqm class 5 incl socket etc including lowering complete. 21.04 S&F slotted PVC pipes 160mm bore of pressure rating 10 kgf/Sqm class 5 incl socket etc including lowering complete. 21.04 S&F slotted PVC pipes 160mm bore of pressure rating 10 kgf/Sqm class 5 incl socket etc including lowering complete. 21.04 S&F slotted PVC pipes 160mm bore of pressure rating 10 kgf/Sqm class 5 incl socket etc including lowering complete. 21.04 S&F slotted PVC pipes 160mm bore of pressure rating 10 kgf/Sqm class 5 incl socket etc including lowering complete. 21.04 S&F slotted PVC pipes 160mm bore of pressure rating 10 kgf/Sqm class 5 incl socket etc including lowering complete. 21.04 S&F slotted PVC pipes 160mm bore of pressure rating 10 kgf/Sqm class 5 incl socket etc including lowering complete. 21.04 S&F slotted PVC pipes 160mm bore of pressure rating 10 kgf/Sqm class 5 incl socket etc including lowering complete. 21.04 S&F slotted PVC pipes 160mm bore of pressure rating 10 kgf/Sqm class 5 incl socket etc including lowering complete. 21.04 S&F slotted PVC pipes 160mm bore of pressure rating 10 kgf/Sqm class 5 incl socket etc including lowering complete. 21.04 S&F slotted PVC pipes 160mm bore of pressure rating 10 kgf/Sqm class 5 incl socket etc including lowering complete. 21.04 S&F slotted PVC pipes 160mm bore of pressure rating 10 kgf/Sqm class 5 incl socket etc including lowering complete. 21.04 S&F slotted PVC pipes 160mm bore of pressure rating 10 kgf/Sqm class 5 incl socket etc including lowering complete. 21.04 S&F slotted PVC pipes 160mm bore of pressure rating 10 kgf/Sqm class 5 incl socket etc including lowering complete. 21.04 S&F slotted PVC pipes 160mm bore of pressure rating 10 kgf/Sqm class 5 incl socket etc including lowering complete. 21.04 S&F slotted PVC pipes 160mm bore of pressure rating 10 kgf/Sqm class 5 incl socket etc including lowering complete. 21.04 S&F slotted PVC pipes 160mm bore of pressure rating 10 kgf/Sqm class 5 incl socket etc including lowering complete. 21.04 S&F slotted PVC pipes 160mm bore of pressure rating 10 kgf/Sqm class 5 incl socket etc including lowering complete. 21.04 S&F slotted PVC pipes 160mm bore of pressure rating 10 kgf/Sqm class 5 incl socket etc including lowering complete. 21.04 S&F slotted PVC pipes 160mm bore of pressure rating 10 kgf/Sqm class 5 incl socket etc including lowering complete. 21.04 S&F slotted PVC pipes 160mm bore of pressure rating 10 kgf/Sqm class 5 incl socket etc including lowering complete. 21.04 S&F slotted PVC pipes 160mm bore of pressure rating 10 kgf/Sqm class 5 incl socket etc including lowering complete. 21.04 S&F slotted PVC pipes 160mm bore of pressure rating 10 kgf/Sqm class 5 incl socket etc including lowering complete. 21.04 S&F slotted PVC pipes 160mm bore of pressure rating 10 kgf/Sqm class 5 incl socket etc including lowering complete. 21.04 S&F slotted PVC pipes 160mm bore of pressure rating 10 kgf/Sqm class 5 incl socket etc including lowering complete. 21.04 S&F slotted PVC pipes 160mm bore of pressure rating 10 kgf/Sqm class 5 incl socket etc including lowering complete. 21.04 S&F slotted PVC pipes 160mm bore of pressure rating 10 kgf/Sqm class 5 incl socket etc including lowering complete. 21.04 S&F slotted PVC pipes 160mm bore of pressure rating 10 kgf/Sqm class 5 incl socket etc including lowering complete. 21.04 S&F slotted PVC pipes 160mm bore of pressure rating 10 kgf/Sqm class 5 incl socket etc including lowering complete. 21.04 S&F slotted PVC pipes 160mm bore of pressure rating 10 kgf/Sqm class 5 incl socket etc including lowering complete. 21.04 S&F slotted PVC pipes 160mm bore of pressure rating 10 kgf/Sqm class 5 incl socket etc including lowering complete. 21.04 S&F slotted PVC pipes 160mm bore of pressure rating 10 kgf/Sqm class 5 incl socket etc including lowering complete. 21.04 0 S&F slotted PVC pipes 160mm bore of pressure rating 10 kgf/Sqm class 5 incl socket etc including lowering complete. 21.04 0

External Water Supply 22.00 External Water Supply 22.00 External Water Supply 22.00 External Water Supply 22.00 External Water Supply 22.00 External Water Supply 22.00 External Water Supply 22.00 External Water Supply 22.00 External Water Supply 22.00 External Water Supply 22.00 External Water Supply 22.00 External Water Supply 22.00 External Water Supply 22.00 External Water Supply 22.00 External Water Supply 22.00 External Water Supply 22.00 External Water Supply 22.00 External Water Supply 22.00 External Water Supply 22.00 External Water Supply 22.00 External Water Supply 22.00 External Water Supply 22.00 External Water Supply 22.00 External Water Supply 22.00 External Water Supply 22.00 External Water Supply 22.00 External Water Supply 22.00 External Water Supply 22.00 External Water Supply 22.00 External Water Supply 22.00 External Water Supply 22.00 External Water Supply 22.00 External Water Supply 22.00 External Water Supply 22.00 External Water Supply 22.00 External Water Supply 22.00 External Water Supply 22.00 External Water Supply 22.00 External Water Supply 22.00 External Water Supply 22.00 External Water Supply 22.00 External Water Supply 22.00 External Water Supply 22.00 External Water Supply 22.00 External Water Supply 22.00

1 0 Supply, laying jointing, commissioning and testing Ductile iron pipe of 100 mm bore with spigot and socket end centrifugally cast(spun) class K-7 conforming to IS-8329-2000 in any length laid in trenches complete all as specified and directed 22.01 Supply, laying jointing, commissioning and testing Ductile iron pipe of 100 mm bore with spigot and socket end centrifugally cast(spun) class K-7 conforming to IS-8329-2000 in any length laid in trenches complete all as specified and directed 22.01 Supply, laying jointing, commissioning and testing Ductile iron pipe of 100 mm bore with spigot and socket end centrifugally cast(spun) class K-7 conforming to IS-8329-2000 in any length laid in trenches complete all as specified and directed 22.01 1 Supply, laying jointing, commissioning and testing Ductile iron pipe of 100 mm bore with spigot and socket end centrifugally cast(spun) class K-7 conforming to IS-8329-2000 in any length laid in trenches complete all as specified and directed 22.01 Supply, laying jointing, commissioning and testing Ductile iron pipe of 100 mm bore with spigot and socket end centrifugally cast(spun) class K-7 conforming to IS-8329-2000 in any length laid in trenches complete all as specified and directed 22.01 Supply, laying jointing, commissioning and testing Ductile iron pipe of 100 mm bore with spigot and socket end centrifugally cast(spun) class K-7 conforming to IS-8329-2000 in any length laid in trenches complete all as specified and directed 22.01 Supply, laying jointing, commissioning and testing Ductile iron pipe of 100 mm bore with spigot and socket end centrifugally cast(spun) class K-7 conforming to IS-8329-2000 in any length laid in trenches complete all as specified and directed 22.01 Supply, laying jointing, commissioning and testing Ductile iron pipe of 100 mm bore with spigot and socket end centrifugally cast(spun) class K-7 conforming to IS-8329-2000 in any length laid in trenches complete all as specified and directed 22.01 Supply, laying jointing, commissioning and testing Ductile iron pipe of 100 mm bore with spigot and socket end centrifugally cast(spun) class K-7 conforming to IS-8329-2000 in any length laid in trenches complete all as specified and directed 22.01 Supply, laying jointing, commissioning and testing Ductile iron pipe of 100 mm bore with spigot and socket end centrifugally cast(spun) class K-7 conforming to IS-8329-2000 in any length laid in trenches complete all as specified and directed 22.01 Supply, laying jointing, commissioning and testing Ductile iron pipe of 100 mm bore with spigot and socket end centrifugally cast(spun) class K-7 conforming to IS-8329-2000 in any length laid in trenches complete all as specified and directed 22.01 Supply, laying jointing, commissioning and testing Ductile iron pipe of 100 mm bore with spigot and socket end centrifugally cast(spun) class K-7 conforming to IS-8329-2000 in any length laid in trenches complete all as specified and directed 22.01 Supply, laying jointing, commissioning and testing Ductile iron pipe of 100 mm bore with spigot and socket end centrifugally cast(spun) class K-7 conforming to IS-8329-2000 in any length laid in trenches complete all as specified and directed 22.01 Supply, laying jointing, commissioning and testing Ductile iron pipe of 100 mm bore with spigot and socket end centrifugally cast(spun) class K-7 conforming to IS-8329-2000 in any length laid in trenches complete all as specified and directed 22.01 Supply, laying jointing, commissioning and testing Ductile iron pipe of 100 mm bore with spigot and socket end centrifugally cast(spun) class K-7 conforming to IS-8329-2000 in any length laid in trenches complete all as specified and directed 22.01 Supply, laying jointing, commissioning and testing Ductile iron pipe of 100 mm bore with spigot and socket end centrifugally cast(spun) class K-7 conforming to IS-8329-2000 in any length laid in trenches complete all as specified and directed 22.01 Supply, laying jointing, commissioning and testing Ductile iron pipe of 100 mm bore with spigot and socket end centrifugally cast(spun) class K-7 conforming to IS-8329-2000 in any length laid in trenches complete all as specified and directed 22.01 Supply, laying jointing, commissioning and testing Ductile iron pipe of 100 mm bore with spigot and socket end centrifugally cast(spun) class K-7 conforming to IS-8329-2000 in any length laid in trenches complete all as specified and directed 22.01 Supply, laying jointing, commissioning and testing Ductile iron pipe of 100 mm bore with spigot and socket end centrifugally cast(spun) class K-7 conforming to IS-8329-2000 in any length laid in trenches complete all as specified and directed 22.01 Supply, laying jointing, commissioning and testing Ductile iron pipe of 100 mm bore with spigot and socket end centrifugally cast(spun) class K-7 conforming to IS-8329-2000 in any length laid in trenches complete all as specified and directed 22.01 Supply, laying jointing, commissioning and testing Ductile iron pipe of 100 mm bore with spigot and socket end centrifugally cast(spun) class K-7 conforming to IS-8329-2000 in any length laid in trenches complete all as specified and directed 22.01 Supply, laying jointing, commissioning and testing Ductile iron pipe of 100 mm bore with spigot and socket end centrifugally cast(spun) class K-7 conforming to IS-8329-2000 in any length laid in trenches complete all as specified and directed 22.01 Supply, laying jointing, commissioning and testing Ductile iron pipe of 100 mm bore with spigot and socket end centrifugally cast(spun) class K-7 conforming to IS-8329-2000 in any length laid in trenches complete all as specified and directed 22.01 Supply, laying jointing, commissioning and testing Ductile iron pipe of 100 mm bore with spigot and socket end centrifugally cast(spun) class K-7 conforming to IS-8329-2000 in any length laid in trenches complete all as specified and directed 22.01 Supply, laying jointing, commissioning and testing Ductile iron pipe of 100 mm bore with spigot and socket end centrifugally cast(spun) class K-7 conforming to IS-8329-2000 in any length laid in trenches complete all as specified and directed 22.01 Supply, laying jointing, commissioning and testing Ductile iron pipe of 100 mm bore with spigot and socket end centrifugally cast(spun) class K-7 conforming to IS-8329-2000 in any length laid in trenches complete all as specified and directed 22.01 Supply, laying jointing, commissioning and testing Ductile iron pipe of 100 mm bore with spigot and socket end centrifugally cast(spun) class K-7 conforming to IS-8329-2000 in any length laid in trenches complete all as specified and directed 22.01 Supply, laying jointing, commissioning and testing Ductile iron pipe of 100 mm bore with spigot and socket end centrifugally cast(spun) class K-7 conforming to IS-8329-2000 in any length laid in trenches complete all as specified and directed 22.01 Supply, laying jointing, commissioning and testing Ductile iron pipe of 100 mm bore with spigot and socket end centrifugally cast(spun) class K-7 conforming to IS-8329-2000 in any length laid in trenches complete all as specified and directed 22.01 Supply, laying jointing, commissioning and testing Ductile iron pipe of 100 mm bore with spigot and socket end centrifugally cast(spun) class K-7 conforming to IS-8329-2000 in any length laid in trenches complete all as specified and directed 22.01 Supply, laying jointing, commissioning and testing Ductile iron pipe of 100 mm bore with spigot and socket end centrifugally cast(spun) class K-7 conforming to IS-8329-2000 in any length laid in trenches complete all as specified and directed 22.01 Supply, laying jointing, commissioning and testing Ductile iron pipe of 100 mm bore with spigot and socket end centrifugally cast(spun) class K-7 conforming to IS-8329-2000 in any length laid in trenches complete all as specified and directed 22.01 Supply, laying jointing, commissioning and testing Ductile iron pipe of 100 mm bore with spigot and socket end centrifugally cast(spun) class K-7 conforming to IS-8329-2000 in any length laid in trenches complete all as specified and directed 22.01 Supply, laying jointing, commissioning and testing Ductile iron pipe of 100 mm bore with spigot and socket end centrifugally cast(spun) class K-7 conforming to IS-8329-2000 in any length laid in trenches complete all as specified and directed 22.01 Supply, laying jointing, commissioning and testing Ductile iron pipe of 100 mm bore with spigot and socket end centrifugally cast(spun) class K-7 conforming to IS-8329-2000 in any length laid in trenches complete all as specified and directed 22.01 Supply, laying jointing, commissioning and testing Ductile iron pipe of 100 mm bore with spigot and socket end centrifugally cast(spun) class K-7 conforming to IS-8329-2000 in any length laid in trenches complete all as specified and directed 22.01 Supply, laying jointing, commissioning and testing Ductile iron pipe of 100 mm bore with spigot and socket end centrifugally cast(spun) class K-7 conforming to IS-8329-2000 in any length laid in trenches complete all as specified and directed 22.01 Supply, laying jointing, commissioning and testing Ductile iron pipe of 100 mm bore with spigot and socket end centrifugally cast(spun) class K-7 conforming to IS-8329-2000 in any length laid in trenches complete all as specified and directed 22.01 Supply, laying jointing, commissioning and testing Ductile iron pipe of 100 mm bore with spigot and socket end centrifugally cast(spun) class K-7 conforming to IS-8329-2000 in any length laid in trenches complete all as specified and directed 22.01 Supply, laying jointing, commissioning and testing Ductile iron pipe of 100 mm bore with spigot and socket end centrifugally cast(spun) class K-7 conforming to IS-8329-2000 in any length laid in trenches complete all as specified and directed 22.01 Supply, laying jointing, commissioning and testing Ductile iron pipe of 100 mm bore with spigot and socket end centrifugally cast(spun) class K-7 conforming to IS-8329-2000 in any length laid in trenches complete all as specified and directed 22.01 Supply, laying jointing, commissioning and testing Ductile iron pipe of 100 mm bore with spigot and socket end centrifugally cast(spun) class K-7 conforming to IS-8329-2000 in any length laid in trenches complete all as specified and directed 22.01 Supply, laying jointing, commissioning and testing Ductile iron pipe of 100 mm bore with spigot and socket end centrifugally cast(spun) class K-7 conforming to IS-8329-2000 in any length laid in trenches complete all as specified and directed 22.01 Supply, laying jointing, commissioning and testing Ductile iron pipe of 100 mm bore with spigot and socket end centrifugally cast(spun) class K-7 conforming to IS-8329-2000 in any length laid in trenches complete all as specified and directed 22.01 0 Supply, laying jointing, commissioning and testing Ductile iron pipe of 100 mm bore with spigot and socket end centrifugally cast(spun) class K-7 conforming to IS-8329-2000 in any length laid in trenches complete all as specified and directed 22.01 0

50 0 Construction of valve pit of size 120cm x 120cm x 120cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including paintin Construction of valve pit of size 120cm x 120cm x 120cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including paintin Construction of valve pit of size 120cm x 120cm x 120cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including paintin 1 Construction of valve pit of size 120cm x 120cm x 120cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including paintin Construction of valve pit of size 120cm x 120cm x 120cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including paintin Construction of valve pit of size 120cm x 120cm x 120cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including paintin Construction of valve pit of size 120cm x 120cm x 120cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including paintin Construction of valve pit of size 120cm x 120cm x 120cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including paintin Construction of valve pit of size 120cm x 120cm x 120cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including paintin Construction of valve pit of size 120cm x 120cm x 120cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including paintin Construction of valve pit of size 120cm x 120cm x 120cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including paintin Construction of valve pit of size 120cm x 120cm x 120cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including paintin Construction of valve pit of size 120cm x 120cm x 120cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including paintin Construction of valve pit of size 120cm x 120cm x 120cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including paintin Construction of valve pit of size 120cm x 120cm x 120cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including paintin Construction of valve pit of size 120cm x 120cm x 120cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including paintin Construction of valve pit of size 120cm x 120cm x 120cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including paintin Construction of valve pit of size 120cm x 120cm x 120cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including paintin Construction of valve pit of size 120cm x 120cm x 120cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including paintin Construction of valve pit of size 120cm x 120cm x 120cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including paintin Construction of valve pit of size 120cm x 120cm x 120cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including paintin Construction of valve pit of size 120cm x 120cm x 120cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including paintin Construction of valve pit of size 120cm x 120cm x 120cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including paintin Construction of valve pit of size 120cm x 120cm x 120cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including paintin Construction of valve pit of size 120cm x 120cm x 120cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including paintin Construction of valve pit of size 120cm x 120cm x 120cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including paintin Construction of valve pit of size 120cm x 120cm x 120cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including paintin Construction of valve pit of size 120cm x 120cm x 120cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including paintin Construction of valve pit of size 120cm x 120cm x 120cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including paintin Construction of valve pit of size 120cm x 120cm x 120cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including paintin Construction of valve pit of size 120cm x 120cm x 120cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including paintin Construction of valve pit of size 120cm x 120cm x 120cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including paintin Construction of valve pit of size 120cm x 120cm x 120cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including paintin Construction of valve pit of size 120cm x 120cm x 120cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including paintin Construction of valve pit of size 120cm x 120cm x 120cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including paintin Construction of valve pit of size 120cm x 120cm x 120cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including paintin Construction of valve pit of size 120cm x 120cm x 120cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including paintin Construction of valve pit of size 120cm x 120cm x 120cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including paintin Construction of valve pit of size 120cm x 120cm x 120cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including paintin Construction of valve pit of size 120cm x 120cm x 120cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including paintin Construction of valve pit of size 120cm x 120cm x 120cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including paintin Construction of valve pit of size 120cm x 120cm x 120cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including paintin Construction of valve pit of size 120cm x 120cm x 120cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including paintin Construction of valve pit of size 120cm x 120cm x 120cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including paintin 0 Construction of valve pit of size 120cm x 120cm x 120cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including paintin 0

1 0 Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w 1 Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w 0 Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w 0

External Electric Supply 23.00 External Electric Supply 23.00 External Electric Supply 23.00 External Electric Supply 23.00 External Electric Supply 23.00 External Electric Supply 23.00 External Electric Supply 23.00 External Electric Supply 23.00 External Electric Supply 23.00 External Electric Supply 23.00 External Electric Supply 23.00 External Electric Supply 23.00 External Electric Supply 23.00 External Electric Supply 23.00 External Electric Supply 23.00 External Electric Supply 23.00 External Electric Supply 23.00 External Electric Supply 23.00 External Electric Supply 23.00 External Electric Supply 23.00 External Electric Supply 23.00 External Electric Supply 23.00 External Electric Supply 23.00 External Electric Supply 23.00 External Electric Supply 23.00 External Electric Supply 23.00 External Electric Supply 23.00 External Electric Supply 23.00 External Electric Supply 23.00 External Electric Supply 23.00 External Electric Supply 23.00 External Electric Supply 23.00 External Electric Supply 23.00 External Electric Supply 23.00 External Electric Supply 23.00 External Electric Supply 23.00 External Electric Supply 23.00 External Electric Supply 23.00 External Electric Supply 23.00 External Electric Supply 23.00 External Electric Supply 23.00 External Electric Supply 23.00 External Electric Supply 23.00 External Electric Supply 23.00 External Electric Supply 23.00

2 0 Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w 1 Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w 0 Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w 0

Supply, installation, commissioning and testing of 160 KVA Transformer naturally cooled, ONAN with external cooling tube, 11 KV/433 volts, EEL-2 of IS : 1180-2014 with amd no. 1,2,3,& 4,Total losses 570 W @50% load and 1000 W@100% load, step down outdoor Supply, installation, commissioning and testing of 160 KVA Transformer naturally cooled, ONAN with external cooling tube, 11 KV/433 volts, EEL-2 of IS : 1180-2014 with amd no. 1,2,3,& 4,Total losses 570 W @50% load and 1000 W@100% load, step down outdoor Supply, installation, commissioning and testing of 160 KVA Transformer naturally cooled, ONAN with external cooling tube, 11 KV/433 volts, EEL-2 of IS : 1180-2014 with amd no. 1,2,3,& 4,Total losses 570 W @50% load and 1000 W@100% load, step down outdoor Supply, installation, commissioning and testing of 160 KVA Transformer naturally cooled, ONAN with external cooling tube, 11 KV/433 volts, EEL-2 of IS : 1180-2014 with amd no. 1,2,3,& 4,Total losses 570 W @50% load and 1000 W@100% load, step down outdoor Supply, installation, commissioning and testing of 160 KVA Transformer naturally cooled, ONAN with external cooling tube, 11 KV/433 volts, EEL-2 of IS : 1180-2014 with amd no. 1,2,3,& 4,Total losses 570 W @50% load and 1000 W@100% load, step down outdoor Supply, installation, commissioning and testing of 160 KVA Transformer naturally cooled, ONAN with external cooling tube, 11 KV/433 volts, EEL-2 of IS : 1180-2014 with amd no. 1,2,3,& 4,Total losses 570 W @50% load and 1000 W@100% load, step down outdoor Supply, installation, commissioning and testing of 160 KVA Transformer naturally cooled, ONAN with external cooling tube, 11 KV/433 volts, EEL-2 of IS : 1180-2014 with amd no. 1,2,3,& 4,Total losses 570 W @50% load and 1000 W@100% load, step down outdoor Supply, installation, commissioning and testing of 160 KVA Transformer naturally cooled, ONAN with external cooling tube, 11 KV/433 volts, EEL-2 of IS : 1180-2014 with amd no. 1,2,3,& 4,Total losses 570 W @50% load and 1000 W@100% load, step down outdoor Supply, installation, commissioning and testing of 160 KVA Transformer naturally cooled, ONAN with external cooling tube, 11 KV/433 volts, EEL-2 of IS : 1180-2014 with amd no. 1,2,3,& 4,Total losses 570 W @50% load and 1000 W@100% load, step down outdoor Supply, installation, commissioning and testing of 160 KVA Transformer naturally cooled, ONAN with external cooling tube, 11 KV/433 volts, EEL-2 of IS : 1180-2014 with amd no. 1,2,3,& 4,Total losses 570 W @50% load and 1000 W@100% load, step down outdoor Supply, installation, commissioning and testing of 160 KVA Transformer naturally cooled, ONAN with external cooling tube, 11 KV/433 volts, EEL-2 of IS : 1180-2014 with amd no. 1,2,3,& 4,Total losses 570 W @50% load and 1000 W@100% load, step down outdoor Supply, installation, commissioning and testing of 160 KVA Transformer naturally cooled, ONAN with external cooling tube, 11 KV/433 volts, EEL-2 of IS : 1180-2014 with amd no. 1,2,3,& 4,Total losses 570 W @50% load and 1000 W@100% load, step down outdoor Supply, installation, commissioning and testing of 160 KVA Transformer naturally cooled, ONAN with external cooling tube, 11 KV/433 volts, EEL-2 of IS : 1180-2014 with amd no. 1,2,3,& 4,Total losses 570 W @50% load and 1000 W@100% load, step down outdoor Supply, installation, commissioning and testing of 160 KVA Transformer naturally cooled, ONAN with external cooling tube, 11 KV/433 volts, EEL-2 of IS : 1180-2014 with amd no. 1,2,3,& 4,Total losses 570 W @50% load and 1000 W@100% load, step down outdoor Supply, installation, commissioning and testing of 160 KVA Transformer naturally cooled, ONAN with external cooling tube, 11 KV/433 volts, EEL-2 of IS : 1180-2014 with amd no. 1,2,3,& 4,Total losses 570 W @50% load and 1000 W@100% load, step down outdoor Supply, installation, commissioning and testing of 160 KVA Transformer naturally cooled, ONAN with external cooling tube, 11 KV/433 volts, EEL-2 of IS : 1180-2014 with amd no. 1,2,3,& 4,Total losses 570 W @50% load and 1000 W@100% load, step down outdoor Supply, installation, commissioning and testing of 160 KVA Transformer naturally cooled, ONAN with external cooling tube, 11 KV/433 volts, EEL-2 of IS : 1180-2014 with amd no. 1,2,3,& 4,Total losses 570 W @50% load and 1000 W@100% load, step down outdoor Supply, installation, commissioning and testing of 160 KVA Transformer naturally cooled, ONAN with external cooling tube, 11 KV/433 volts, EEL-2 of IS : 1180-2014 with amd no. 1,2,3,& 4,Total losses 570 W @50% load and 1000 W@100% load, step down outdoor Supply, installation, commissioning and testing of 160 KVA Transformer naturally cooled, ONAN with external cooling tube, 11 KV/433 volts, EEL-2 of IS : 1180-2014 with amd no. 1,2,3,& 4,Total losses 570 W @50% load and 1000 W@100% load, step down outdoor Supply, installation, commissioning and testing of 160 KVA Transformer naturally cooled, ONAN with external cooling tube, 11 KV/433 volts, EEL-2 of IS : 1180-2014 with amd no. 1,2,3,& 4,Total losses 570 W @50% load and 1000 W@100% load, step down outdoor Supply, installation, commissioning and testing of 160 KVA Transformer naturally cooled, ONAN with external cooling tube, 11 KV/433 volts, EEL-2 of IS : 1180-2014 with amd no. 1,2,3,& 4,Total losses 570 W @50% load and 1000 W@100% load, step down outdoor Supply, installation, commissioning and testing of 160 KVA Transformer naturally cooled, ONAN with external cooling tube, 11 KV/433 volts, EEL-2 of IS : 1180-2014 with amd no. 1,2,3,& 4,Total losses 570 W @50% load and 1000 W@100% load, step down outdoor Supply, installation, commissioning and testing of 160 KVA Transformer naturally cooled, ONAN with external cooling tube, 11 KV/433 volts, EEL-2 of IS : 1180-2014 with amd no. 1,2,3,& 4,Total losses 570 W @50% load and 1000 W@100% load, step down outdoor Supply, installation, commissioning and testing of 160 KVA Transformer naturally cooled, ONAN with external cooling tube, 11 KV/433 volts, EEL-2 of IS : 1180-2014 with amd no. 1,2,3,& 4,Total losses 570 W @50% load and 1000 W@100% load, step down outdoor Supply, installation, commissioning and testing of 160 KVA Transformer naturally cooled, ONAN with external cooling tube, 11 KV/433 volts, EEL-2 of IS : 1180-2014 with amd no. 1,2,3,& 4,Total losses 570 W @50% load and 1000 W@100% load, step down outdoor Supply, installation, commissioning and testing of 160 KVA Transformer naturally cooled, ONAN with external cooling tube, 11 KV/433 volts, EEL-2 of IS : 1180-2014 with amd no. 1,2,3,& 4,Total losses 570 W @50% load and 1000 W@100% load, step down outdoor Supply, installation, commissioning and testing of 160 KVA Transformer naturally cooled, ONAN with external cooling tube, 11 KV/433 volts, EEL-2 of IS : 1180-2014 with amd no. 1,2,3,& 4,Total losses 570 W @50% load and 1000 W@100% load, step down outdoor Supply, installation, commissioning and testing of 160 KVA Transformer naturally cooled, ONAN with external cooling tube, 11 KV/433 volts, EEL-2 of IS : 1180-2014 with amd no. 1,2,3,& 4,Total losses 570 W @50% load and 1000 W@100% load, step down outdoor Supply, installation, commissioning and testing of 160 KVA Transformer naturally cooled, ONAN with external cooling tube, 11 KV/433 volts, EEL-2 of IS : 1180-2014 with amd no. 1,2,3,& 4,Total losses 570 W @50% load and 1000 W@100% load, step down outdoor Supply, installation, commissioning and testing of 160 KVA Transformer naturally cooled, ONAN with external cooling tube, 11 KV/433 volts, EEL-2 of IS : 1180-2014 with amd no. 1,2,3,& 4,Total losses 570 W @50% load and 1000 W@100% load, step down outdoor Supply, installation, commissioning and testing of 160 KVA Transformer naturally cooled, ONAN with external cooling tube, 11 KV/433 volts, EEL-2 of IS : 1180-2014 with amd no. 1,2,3,& 4,Total losses 570 W @50% load and 1000 W@100% load, step down outdoor Supply, installation, commissioning and testing of 160 KVA Transformer naturally cooled, ONAN with external cooling tube, 11 KV/433 volts, EEL-2 of IS : 1180-2014 with amd no. 1,2,3,& 4,Total losses 570 W @50% load and 1000 W@100% load, step down outdoor Supply, installation, commissioning and testing of 160 KVA Transformer naturally cooled, ONAN with external cooling tube, 11 KV/433 volts, EEL-2 of IS : 1180-2014 with amd no. 1,2,3,& 4,Total losses 570 W @50% load and 1000 W@100% load, step down outdoor Supply, installation, commissioning and testing of 160 KVA Transformer naturally cooled, ONAN with external cooling tube, 11 KV/433 volts, EEL-2 of IS : 1180-2014 with amd no. 1,2,3,& 4,Total losses 570 W @50% load and 1000 W@100% load, step down outdoor Supply, installation, commissioning and testing of 160 KVA Transformer naturally cooled, ONAN with external cooling tube, 11 KV/433 volts, EEL-2 of IS : 1180-2014 with amd no. 1,2,3,& 4,Total losses 570 W @50% load and 1000 W@100% load, step down outdoor Supply, installation, commissioning and testing of 160 KVA Transformer naturally cooled, ONAN with external cooling tube, 11 KV/433 volts, EEL-2 of IS : 1180-2014 with amd no. 1,2,3,& 4,Total losses 570 W @50% load and 1000 W@100% load, step down outdoor Supply, installation, commissioning and testing of 160 KVA Transformer naturally cooled, ONAN with external cooling tube, 11 KV/433 volts, EEL-2 of IS : 1180-2014 with amd no. 1,2,3,& 4,Total losses 570 W @50% load and 1000 W@100% load, step down outdoor Supply, installation, commissioning and testing of 160 KVA Transformer naturally cooled, ONAN with external cooling tube, 11 KV/433 volts, EEL-2 of IS : 1180-2014 with amd no. 1,2,3,& 4,Total losses 570 W @50% load and 1000 W@100% load, step down outdoor Supply, installation, commissioning and testing of 160 KVA Transformer naturally cooled, ONAN with external cooling tube, 11 KV/433 volts, EEL-2 of IS : 1180-2014 with amd no. 1,2,3,& 4,Total losses 570 W @50% load and 1000 W@100% load, step down outdoor Supply, installation, commissioning and testing of 160 KVA Transformer naturally cooled, ONAN with external cooling tube, 11 KV/433 volts, EEL-2 of IS : 1180-2014 with amd no. 1,2,3,& 4,Total losses 570 W @50% load and 1000 W@100% load, step down outdoor Supply, installation, commissioning and testing of 160 KVA Transformer naturally cooled, ONAN with external cooling tube, 11 KV/433 volts, EEL-2 of IS : 1180-2014 with amd no. 1,2,3,& 4,Total losses 570 W @50% load and 1000 W@100% load, step down outdoor Supply, installation, commissioning and testing of 160 KVA Transformer naturally cooled, ONAN with external cooling tube, 11 KV/433 volts, EEL-2 of IS : 1180-2014 with amd no. 1,2,3,& 4,Total losses 570 W @50% load and 1000 W@100% load, step down outdoor Supply, installation, commissioning and testing of 160 KVA Transformer naturally cooled, ONAN with external cooling tube, 11 KV/433 volts, EEL-2 of IS : 1180-2014 with amd no. 1,2,3,& 4,Total losses 570 W @50% load and 1000 W@100% load, step down outdoor Supply, installation, commissioning and testing of 160 KVA Transformer naturally cooled, ONAN with external cooling tube, 11 KV/433 volts, EEL-2 of IS : 1180-2014 with amd no. 1,2,3,& 4,Total losses 570 W @50% load and 1000 W@100% load, step down outdoor Supply, installation, commissioning and testing of 160 KVA Transformer naturally cooled, ONAN with external cooling tube, 11 KV/433 volts, EEL-2 of IS : 1180-2014 with amd no. 1,2,3,& 4,Total losses 570 W @50% load and 1000 W@100% load, step down outdoor

3 0 Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w 1 Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w 0 Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting w 0

Boring of holes under road, pavement, hard standing by trenchless technology using ultra sound technique and necessary machine or by using manual mechanical tools with manpower for inserting pipe of size 40 mm to 100 mm bore dia for proection of LT Cables Boring of holes under road, pavement, hard standing by trenchless technology using ultra sound technique and necessary machine or by using manual mechanical tools with manpower for inserting pipe of size 40 mm to 100 mm bore dia for proection of LT Cables Boring of holes under road, pavement, hard standing by trenchless technology using ultra sound technique and necessary machine or by using manual mechanical tools with manpower for inserting pipe of size 40 mm to 100 mm bore dia for proection of LT Cables Boring of holes under road, pavement, hard standing by trenchless technology using ultra sound technique and necessary machine or by using manual mechanical tools with manpower for inserting pipe of size 40 mm to 100 mm bore dia for proection of LT Cables Boring of holes under road, pavement, hard standing by trenchless technology using ultra sound technique and necessary machine or by using manual mechanical tools with manpower for inserting pipe of size 40 mm to 100 mm bore dia for proection of LT Cables Boring of holes under road, pavement, hard standing by trenchless technology using ultra sound technique and necessary machine or by using manual mechanical tools with manpower for inserting pipe of size 40 mm to 100 mm bore dia for proection of LT Cables Boring of holes under road, pavement, hard standing by trenchless technology using ultra sound technique and necessary machine or by using manual mechanical tools with manpower for inserting pipe of size 40 mm to 100 mm bore dia for proection of LT Cables Boring of holes under road, pavement, hard standing by trenchless technology using ultra sound technique and necessary machine or by using manual mechanical tools with manpower for inserting pipe of size 40 mm to 100 mm bore dia for proection of LT Cables Boring of holes under road, pavement, hard standing by trenchless technology using ultra sound technique and necessary machine or by using manual mechanical tools with manpower for inserting pipe of size 40 mm to 100 mm bore dia for proection of LT Cables Boring of holes under road, pavement, hard standing by trenchless technology using ultra sound technique and necessary machine or by using manual mechanical tools with manpower for inserting pipe of size 40 mm to 100 mm bore dia for proection of LT Cables Boring of holes under road, pavement, hard standing by trenchless technology using ultra sound technique and necessary machine or by using manual mechanical tools with manpower for inserting pipe of size 40 mm to 100 mm bore dia for proection of LT Cables Boring of holes under road, pavement, hard standing by trenchless technology using ultra sound technique and necessary machine or by using manual mechanical tools with manpower for inserting pipe of size 40 mm to 100 mm bore dia for proection of LT Cables Boring of holes under road, pavement, hard standing by trenchless technology using ultra sound technique and necessary machine or by using manual mechanical tools with manpower for inserting pipe of size 40 mm to 100 mm bore dia for proection of LT Cables Boring of holes under road, pavement, hard standing by trenchless technology using ultra sound technique and necessary machine or by using manual mechanical tools with manpower for inserting pipe of size 40 mm to 100 mm bore dia for proection of LT Cables Boring of holes under road, pavement, hard standing by trenchless technology using ultra sound technique and necessary machine or by using manual mechanical tools with manpower for inserting pipe of size 40 mm to 100 mm bore dia for proection of LT Cables Boring of holes under road, pavement, hard standing by trenchless technology using ultra sound technique and necessary machine or by using manual mechanical tools with manpower for inserting pipe of size 40 mm to 100 mm bore dia for proection of LT Cables Boring of holes under road, pavement, hard standing by trenchless technology using ultra sound technique and necessary machine or by using manual mechanical tools with manpower for inserting pipe of size 40 mm to 100 mm bore dia for proection of LT Cables Boring of holes under road, pavement, hard standing by trenchless technology using ultra sound technique and necessary machine or by using manual mechanical tools with manpower for inserting pipe of size 40 mm to 100 mm bore dia for proection of LT Cables Boring of holes under road, pavement, hard standing by trenchless technology using ultra sound technique and necessary machine or by using manual mechanical tools with manpower for inserting pipe of size 40 mm to 100 mm bore dia for proection of LT Cables Boring of holes under road, pavement, hard standing by trenchless technology using ultra sound technique and necessary machine or by using manual mechanical tools with manpower for inserting pipe of size 40 mm to 100 mm bore dia for proection of LT Cables Boring of holes under road, pavement, hard standing by trenchless technology using ultra sound technique and necessary machine or by using manual mechanical tools with manpower for inserting pipe of size 40 mm to 100 mm bore dia for proection of LT Cables Boring of holes under road, pavement, hard standing by trenchless technology using ultra sound technique and necessary machine or by using manual mechanical tools with manpower for inserting pipe of size 40 mm to 100 mm bore dia for proection of LT Cables Boring of holes under road, pavement, hard standing by trenchless technology using ultra sound technique and necessary machine or by using manual mechanical tools with manpower for inserting pipe of size 40 mm to 100 mm bore dia for proection of LT Cables Boring of holes under road, pavement, hard standing by trenchless technology using ultra sound technique and necessary machine or by using manual mechanical tools with manpower for inserting pipe of size 40 mm to 100 mm bore dia for proection of LT Cables Boring of holes under road, pavement, hard standing by trenchless technology using ultra sound technique and necessary machine or by using manual mechanical tools with manpower for inserting pipe of size 40 mm to 100 mm bore dia for proection of LT Cables Boring of holes under road, pavement, hard standing by trenchless technology using ultra sound technique and necessary machine or by using manual mechanical tools with manpower for inserting pipe of size 40 mm to 100 mm bore dia for proection of LT Cables Boring of holes under road, pavement, hard standing by trenchless technology using ultra sound technique and necessary machine or by using manual mechanical tools with manpower for inserting pipe of size 40 mm to 100 mm bore dia for proection of LT Cables Boring of holes under road, pavement, hard standing by trenchless technology using ultra sound technique and necessary machine or by using manual mechanical tools with manpower for inserting pipe of size 40 mm to 100 mm bore dia for proection of LT Cables Boring of holes under road, pavement, hard standing by trenchless technology using ultra sound technique and necessary machine or by using manual mechanical tools with manpower for inserting pipe of size 40 mm to 100 mm bore dia for proection of LT Cables Boring of holes under road, pavement, hard standing by trenchless technology using ultra sound technique and necessary machine or by using manual mechanical tools with manpower for inserting pipe of size 40 mm to 100 mm bore dia for proection of LT Cables Boring of holes under road, pavement, hard standing by trenchless technology using ultra sound technique and necessary machine or by using manual mechanical tools with manpower for inserting pipe of size 40 mm to 100 mm bore dia for proection of LT Cables Boring of holes under road, pavement, hard standing by trenchless technology using ultra sound technique and necessary machine or by using manual mechanical tools with manpower for inserting pipe of size 40 mm to 100 mm bore dia for proection of LT Cables Boring of holes under road, pavement, hard standing by trenchless technology using ultra sound technique and necessary machine or by using manual mechanical tools with manpower for inserting pipe of size 40 mm to 100 mm bore dia for proection of LT Cables Boring of holes under road, pavement, hard standing by trenchless technology using ultra sound technique and necessary machine or by using manual mechanical tools with manpower for inserting pipe of size 40 mm to 100 mm bore dia for proection of LT Cables Boring of holes under road, pavement, hard standing by trenchless technology using ultra sound technique and necessary machine or by using manual mechanical tools with manpower for inserting pipe of size 40 mm to 100 mm bore dia for proection of LT Cables Boring of holes under road, pavement, hard standing by trenchless technology using ultra sound technique and necessary machine or by using manual mechanical tools with manpower for inserting pipe of size 40 mm to 100 mm bore dia for proection of LT Cables Boring of holes under road, pavement, hard standing by trenchless technology using ultra sound technique and necessary machine or by using manual mechanical tools with manpower for inserting pipe of size 40 mm to 100 mm bore dia for proection of LT Cables Boring of holes under road, pavement, hard standing by trenchless technology using ultra sound technique and necessary machine or by using manual mechanical tools with manpower for inserting pipe of size 40 mm to 100 mm bore dia for proection of LT Cables Boring of holes under road, pavement, hard standing by trenchless technology using ultra sound technique and necessary machine or by using manual mechanical tools with manpower for inserting pipe of size 40 mm to 100 mm bore dia for proection of LT Cables Boring of holes under road, pavement, hard standing by trenchless technology using ultra sound technique and necessary machine or by using manual mechanical tools with manpower for inserting pipe of size 40 mm to 100 mm bore dia for proection of LT Cables Boring of holes under road, pavement, hard standing by trenchless technology using ultra sound technique and necessary machine or by using manual mechanical tools with manpower for inserting pipe of size 40 mm to 100 mm bore dia for proection of LT Cables Boring of holes under road, pavement, hard standing by trenchless technology using ultra sound technique and necessary machine or by using manual mechanical tools with manpower for inserting pipe of size 40 mm to 100 mm bore dia for proection of LT Cables Boring of holes under road, pavement, hard standing by trenchless technology using ultra sound technique and necessary machine or by using manual mechanical tools with manpower for inserting pipe of size 40 mm to 100 mm bore dia for proection of LT Cables Boring of holes under road, pavement, hard standing by trenchless technology using ultra sound technique and necessary machine or by using manual mechanical tools with manpower for inserting pipe of size 40 mm to 100 mm bore dia for proection of LT Cables Boring of holes under road, pavement, hard standing by trenchless technology using ultra sound technique and necessary machine or by using manual mechanical tools with manpower for inserting pipe of size 40 mm to 100 mm bore dia for proection of LT Cables

40 0 Supply, installations, testing and commissioning factory made out door cubical type LT panel board dust and vermin proof , free standing, floor mounting type mounted on and incluidng 1:3:6 PCC foundation as requried at site and of fabricated by 3.0 mm Supply, installations, testing and commissioning factory made out door cubical type LT panel board dust and vermin proof , free standing, floor mounting type mounted on and incluidng 1:3:6 PCC foundation as requried at site and of fabricated by 3.0 mm Supply, installations, testing and commissioning factory made out door cubical type LT panel board dust and vermin proof , free standing, floor mounting type mounted on and incluidng 1:3:6 PCC foundation as requried at site and of fabricated by 3.0 mm 1 Supply, installations, testing and commissioning factory made out door cubical type LT panel board dust and vermin proof , free standing, floor mounting type mounted on and incluidng 1:3:6 PCC foundation as requried at site and of fabricated by 3.0 mm Supply, installations, testing and commissioning factory made out door cubical type LT panel board dust and vermin proof , free standing, floor mounting type mounted on and incluidng 1:3:6 PCC foundation as requried at site and of fabricated by 3.0 mm Supply, installations, testing and commissioning factory made out door cubical type LT panel board dust and vermin proof , free standing, floor mounting type mounted on and incluidng 1:3:6 PCC foundation as requried at site and of fabricated by 3.0 mm Supply, installations, testing and commissioning factory made out door cubical type LT panel board dust and vermin proof , free standing, floor mounting type mounted on and incluidng 1:3:6 PCC foundation as requried at site and of fabricated by 3.0 mm Supply, installations, testing and commissioning factory made out door cubical type LT panel board dust and vermin proof , free standing, floor mounting type mounted on and incluidng 1:3:6 PCC foundation as requried at site and of fabricated by 3.0 mm Supply, installations, testing and commissioning factory made out door cubical type LT panel board dust and vermin proof , free standing, floor mounting type mounted on and incluidng 1:3:6 PCC foundation as requried at site and of fabricated by 3.0 mm Supply, installations, testing and commissioning factory made out door cubical type LT panel board dust and vermin proof , free standing, floor mounting type mounted on and incluidng 1:3:6 PCC foundation as requried at site and of fabricated by 3.0 mm Supply, installations, testing and commissioning factory made out door cubical type LT panel board dust and vermin proof , free standing, floor mounting type mounted on and incluidng 1:3:6 PCC foundation as requried at site and of fabricated by 3.0 mm Supply, installations, testing and commissioning factory made out door cubical type LT panel board dust and vermin proof , free standing, floor mounting type mounted on and incluidng 1:3:6 PCC foundation as requried at site and of fabricated by 3.0 mm Supply, installations, testing and commissioning factory made out door cubical type LT panel board dust and vermin proof , free standing, floor mounting type mounted on and incluidng 1:3:6 PCC foundation as requried at site and of fabricated by 3.0 mm Supply, installations, testing and commissioning factory made out door cubical type LT panel board dust and vermin proof , free standing, floor mounting type mounted on and incluidng 1:3:6 PCC foundation as requried at site and of fabricated by 3.0 mm Supply, installations, testing and commissioning factory made out door cubical type LT panel board dust and vermin proof , free standing, floor mounting type mounted on and incluidng 1:3:6 PCC foundation as requried at site and of fabricated by 3.0 mm Supply, installations, testing and commissioning factory made out door cubical type LT panel board dust and vermin proof , free standing, floor mounting type mounted on and incluidng 1:3:6 PCC foundation as requried at site and of fabricated by 3.0 mm Supply, installations, testing and commissioning factory made out door cubical type LT panel board dust and vermin proof , free standing, floor mounting type mounted on and incluidng 1:3:6 PCC foundation as requried at site and of fabricated by 3.0 mm Supply, installations, testing and commissioning factory made out door cubical type LT panel board dust and vermin proof , free standing, floor mounting type mounted on and incluidng 1:3:6 PCC foundation as requried at site and of fabricated by 3.0 mm Supply, installations, testing and commissioning factory made out door cubical type LT panel board dust and vermin proof , free standing, floor mounting type mounted on and incluidng 1:3:6 PCC foundation as requried at site and of fabricated by 3.0 mm Supply, installations, testing and commissioning factory made out door cubical type LT panel board dust and vermin proof , free standing, floor mounting type mounted on and incluidng 1:3:6 PCC foundation as requried at site and of fabricated by 3.0 mm Supply, installations, testing and commissioning factory made out door cubical type LT panel board dust and vermin proof , free standing, floor mounting type mounted on and incluidng 1:3:6 PCC foundation as requried at site and of fabricated by 3.0 mm Supply, installations, testing and commissioning factory made out door cubical type LT panel board dust and vermin proof , free standing, floor mounting type mounted on and incluidng 1:3:6 PCC foundation as requried at site and of fabricated by 3.0 mm Supply, installations, testing and commissioning factory made out door cubical type LT panel board dust and vermin proof , free standing, floor mounting type mounted on and incluidng 1:3:6 PCC foundation as requried at site and of fabricated by 3.0 mm Supply, installations, testing and commissioning factory made out door cubical type LT panel board dust and vermin proof , free standing, floor mounting type mounted on and incluidng 1:3:6 PCC foundation as requried at site and of fabricated by 3.0 mm Supply, installations, testing and commissioning factory made out door cubical type LT panel board dust and vermin proof , free standing, floor mounting type mounted on and incluidng 1:3:6 PCC foundation as requried at site and of fabricated by 3.0 mm Supply, installations, testing and commissioning factory made out door cubical type LT panel board dust and vermin proof , free standing, floor mounting type mounted on and incluidng 1:3:6 PCC foundation as requried at site and of fabricated by 3.0 mm Supply, installations, testing and commissioning factory made out door cubical type LT panel board dust and vermin proof , free standing, floor mounting type mounted on and incluidng 1:3:6 PCC foundation as requried at site and of fabricated by 3.0 mm Supply, installations, testing and commissioning factory made out door cubical type LT panel board dust and vermin proof , free standing, floor mounting type mounted on and incluidng 1:3:6 PCC foundation as requried at site and of fabricated by 3.0 mm Supply, installations, testing and commissioning factory made out door cubical type LT panel board dust and vermin proof , free standing, floor mounting type mounted on and incluidng 1:3:6 PCC foundation as requried at site and of fabricated by 3.0 mm Supply, installations, testing and commissioning factory made out door cubical type LT panel board dust and vermin proof , free standing, floor mounting type mounted on and incluidng 1:3:6 PCC foundation as requried at site and of fabricated by 3.0 mm Supply, installations, testing and commissioning factory made out door cubical type LT panel board dust and vermin proof , free standing, floor mounting type mounted on and incluidng 1:3:6 PCC foundation as requried at site and of fabricated by 3.0 mm Supply, installations, testing and commissioning factory made out door cubical type LT panel board dust and vermin proof , free standing, floor mounting type mounted on and incluidng 1:3:6 PCC foundation as requried at site and of fabricated by 3.0 mm Supply, installations, testing and commissioning factory made out door cubical type LT panel board dust and vermin proof , free standing, floor mounting type mounted on and incluidng 1:3:6 PCC foundation as requried at site and of fabricated by 3.0 mm Supply, installations, testing and commissioning factory made out door cubical type LT panel board dust and vermin proof , free standing, floor mounting type mounted on and incluidng 1:3:6 PCC foundation as requried at site and of fabricated by 3.0 mm Supply, installations, testing and commissioning factory made out door cubical type LT panel board dust and vermin proof , free standing, floor mounting type mounted on and incluidng 1:3:6 PCC foundation as requried at site and of fabricated by 3.0 mm Supply, installations, testing and commissioning factory made out door cubical type LT panel board dust and vermin proof , free standing, floor mounting type mounted on and incluidng 1:3:6 PCC foundation as requried at site and of fabricated by 3.0 mm Supply, installations, testing and commissioning factory made out door cubical type LT panel board dust and vermin proof , free standing, floor mounting type mounted on and incluidng 1:3:6 PCC foundation as requried at site and of fabricated by 3.0 mm Supply, installations, testing and commissioning factory made out door cubical type LT panel board dust and vermin proof , free standing, floor mounting type mounted on and incluidng 1:3:6 PCC foundation as requried at site and of fabricated by 3.0 mm Supply, installations, testing and commissioning factory made out door cubical type LT panel board dust and vermin proof , free standing, floor mounting type mounted on and incluidng 1:3:6 PCC foundation as requried at site and of fabricated by 3.0 mm Supply, installations, testing and commissioning factory made out door cubical type LT panel board dust and vermin proof , free standing, floor mounting type mounted on and incluidng 1:3:6 PCC foundation as requried at site and of fabricated by 3.0 mm Supply, installations, testing and commissioning factory made out door cubical type LT panel board dust and vermin proof , free standing, floor mounting type mounted on and incluidng 1:3:6 PCC foundation as requried at site and of fabricated by 3.0 mm Supply, installations, testing and commissioning factory made out door cubical type LT panel board dust and vermin proof , free standing, floor mounting type mounted on and incluidng 1:3:6 PCC foundation as requried at site and of fabricated by 3.0 mm Supply, installations, testing and commissioning factory made out door cubical type LT panel board dust and vermin proof , free standing, floor mounting type mounted on and incluidng 1:3:6 PCC foundation as requried at site and of fabricated by 3.0 mm Supply, installations, testing and commissioning factory made out door cubical type LT panel board dust and vermin proof , free standing, floor mounting type mounted on and incluidng 1:3:6 PCC foundation as requried at site and of fabricated by 3.0 mm 0 Supply, installations, testing and commissioning factory made out door cubical type LT panel board dust and vermin proof , free standing, floor mounting type mounted on and incluidng 1:3:6 PCC foundation as requried at site and of fabricated by 3.0 mm 0

40 0 Item 23.03 (Contd/-) (e) MCCB 4 Pole 63 amps ,415 Volt of breaking capacity not less than 16 KA (Ics=100 % of Icu) with adjustable thermal setting - 01 Nos (Street Light ) (e) MCB SPN 10 Amp, 415 V, 10 KA, C-series - 02 Nos (f) Street light timer using Item 23.03 (Contd/-) (e) MCCB 4 Pole 63 amps ,415 Volt of breaking capacity not less than 16 KA (Ics=100 % of Icu) with adjustable thermal setting - 01 Nos (Street Light ) (e) MCB SPN 10 Amp, 415 V, 10 KA, C-series - 02 Nos (f) Street light timer using Item 23.03 (Contd/-) (e) MCCB 4 Pole 63 amps ,415 Volt of breaking capacity not less than 16 KA (Ics=100 % of Icu) with adjustable thermal setting - 01 Nos (Street Light ) (e) MCB SPN 10 Amp, 415 V, 10 KA, C-series - 02 Nos (f) Street light timer using 1 Item 23.03 (Contd/-) (e) MCCB 4 Pole 63 amps ,415 Volt of breaking capacity not less than 16 KA (Ics=100 % of Icu) with adjustable thermal setting - 01 Nos (Street Light ) (e) MCB SPN 10 Amp, 415 V, 10 KA, C-series - 02 Nos (f) Street light timer using Item 23.03 (Contd/-) (e) MCCB 4 Pole 63 amps ,415 Volt of breaking capacity not less than 16 KA (Ics=100 % of Icu) with adjustable thermal setting - 01 Nos (Street Light ) (e) MCB SPN 10 Amp, 415 V, 10 KA, C-series - 02 Nos (f) Street light timer using Item 23.03 (Contd/-) (e) MCCB 4 Pole 63 amps ,415 Volt of breaking capacity not less than 16 KA (Ics=100 % of Icu) with adjustable thermal setting - 01 Nos (Street Light ) (e) MCB SPN 10 Amp, 415 V, 10 KA, C-series - 02 Nos (f) Street light timer using Item 23.03 (Contd/-) (e) MCCB 4 Pole 63 amps ,415 Volt of breaking capacity not less than 16 KA (Ics=100 % of Icu) with adjustable thermal setting - 01 Nos (Street Light ) (e) MCB SPN 10 Amp, 415 V, 10 KA, C-series - 02 Nos (f) Street light timer using Item 23.03 (Contd/-) (e) MCCB 4 Pole 63 amps ,415 Volt of breaking capacity not less than 16 KA (Ics=100 % of Icu) with adjustable thermal setting - 01 Nos (Street Light ) (e) MCB SPN 10 Amp, 415 V, 10 KA, C-series - 02 Nos (f) Street light timer using Item 23.03 (Contd/-) (e) MCCB 4 Pole 63 amps ,415 Volt of breaking capacity not less than 16 KA (Ics=100 % of Icu) with adjustable thermal setting - 01 Nos (Street Light ) (e) MCB SPN 10 Amp, 415 V, 10 KA, C-series - 02 Nos (f) Street light timer using Item 23.03 (Contd/-) (e) MCCB 4 Pole 63 amps ,415 Volt of breaking capacity not less than 16 KA (Ics=100 % of Icu) with adjustable thermal setting - 01 Nos (Street Light ) (e) MCB SPN 10 Amp, 415 V, 10 KA, C-series - 02 Nos (f) Street light timer using Item 23.03 (Contd/-) (e) MCCB 4 Pole 63 amps ,415 Volt of breaking capacity not less than 16 KA (Ics=100 % of Icu) with adjustable thermal setting - 01 Nos (Street Light ) (e) MCB SPN 10 Amp, 415 V, 10 KA, C-series - 02 Nos (f) Street light timer using Item 23.03 (Contd/-) (e) MCCB 4 Pole 63 amps ,415 Volt of breaking capacity not less than 16 KA (Ics=100 % of Icu) with adjustable thermal setting - 01 Nos (Street Light ) (e) MCB SPN 10 Amp, 415 V, 10 KA, C-series - 02 Nos (f) Street light timer using Item 23.03 (Contd/-) (e) MCCB 4 Pole 63 amps ,415 Volt of breaking capacity not less than 16 KA (Ics=100 % of Icu) with adjustable thermal setting - 01 Nos (Street Light ) (e) MCB SPN 10 Amp, 415 V, 10 KA, C-series - 02 Nos (f) Street light timer using Item 23.03 (Contd/-) (e) MCCB 4 Pole 63 amps ,415 Volt of breaking capacity not less than 16 KA (Ics=100 % of Icu) with adjustable thermal setting - 01 Nos (Street Light ) (e) MCB SPN 10 Amp, 415 V, 10 KA, C-series - 02 Nos (f) Street light timer using Item 23.03 (Contd/-) (e) MCCB 4 Pole 63 amps ,415 Volt of breaking capacity not less than 16 KA (Ics=100 % of Icu) with adjustable thermal setting - 01 Nos (Street Light ) (e) MCB SPN 10 Amp, 415 V, 10 KA, C-series - 02 Nos (f) Street light timer using Item 23.03 (Contd/-) (e) MCCB 4 Pole 63 amps ,415 Volt of breaking capacity not less than 16 KA (Ics=100 % of Icu) with adjustable thermal setting - 01 Nos (Street Light ) (e) MCB SPN 10 Amp, 415 V, 10 KA, C-series - 02 Nos (f) Street light timer using Item 23.03 (Contd/-) (e) MCCB 4 Pole 63 amps ,415 Volt of breaking capacity not less than 16 KA (Ics=100 % of Icu) with adjustable thermal setting - 01 Nos (Street Light ) (e) MCB SPN 10 Amp, 415 V, 10 KA, C-series - 02 Nos (f) Street light timer using Item 23.03 (Contd/-) (e) MCCB 4 Pole 63 amps ,415 Volt of breaking capacity not less than 16 KA (Ics=100 % of Icu) with adjustable thermal setting - 01 Nos (Street Light ) (e) MCB SPN 10 Amp, 415 V, 10 KA, C-series - 02 Nos (f) Street light timer using Item 23.03 (Contd/-) (e) MCCB 4 Pole 63 amps ,415 Volt of breaking capacity not less than 16 KA (Ics=100 % of Icu) with adjustable thermal setting - 01 Nos (Street Light ) (e) MCB SPN 10 Amp, 415 V, 10 KA, C-series - 02 Nos (f) Street light timer using Item 23.03 (Contd/-) (e) MCCB 4 Pole 63 amps ,415 Volt of breaking capacity not less than 16 KA (Ics=100 % of Icu) with adjustable thermal setting - 01 Nos (Street Light ) (e) MCB SPN 10 Amp, 415 V, 10 KA, C-series - 02 Nos (f) Street light timer using Item 23.03 (Contd/-) (e) MCCB 4 Pole 63 amps ,415 Volt of breaking capacity not less than 16 KA (Ics=100 % of Icu) with adjustable thermal setting - 01 Nos (Street Light ) (e) MCB SPN 10 Amp, 415 V, 10 KA, C-series - 02 Nos (f) Street light timer using Item 23.03 (Contd/-) (e) MCCB 4 Pole 63 amps ,415 Volt of breaking capacity not less than 16 KA (Ics=100 % of Icu) with adjustable thermal setting - 01 Nos (Street Light ) (e) MCB SPN 10 Amp, 415 V, 10 KA, C-series - 02 Nos (f) Street light timer using Item 23.03 (Contd/-) (e) MCCB 4 Pole 63 amps ,415 Volt of breaking capacity not less than 16 KA (Ics=100 % of Icu) with adjustable thermal setting - 01 Nos (Street Light ) (e) MCB SPN 10 Amp, 415 V, 10 KA, C-series - 02 Nos (f) Street light timer using Item 23.03 (Contd/-) (e) MCCB 4 Pole 63 amps ,415 Volt of breaking capacity not less than 16 KA (Ics=100 % of Icu) with adjustable thermal setting - 01 Nos (Street Light ) (e) MCB SPN 10 Amp, 415 V, 10 KA, C-series - 02 Nos (f) Street light timer using Item 23.03 (Contd/-) (e) MCCB 4 Pole 63 amps ,415 Volt of breaking capacity not less than 16 KA (Ics=100 % of Icu) with adjustable thermal setting - 01 Nos (Street Light ) (e) MCB SPN 10 Amp, 415 V, 10 KA, C-series - 02 Nos (f) Street light timer using Item 23.03 (Contd/-) (e) MCCB 4 Pole 63 amps ,415 Volt of breaking capacity not less than 16 KA (Ics=100 % of Icu) with adjustable thermal setting - 01 Nos (Street Light ) (e) MCB SPN 10 Amp, 415 V, 10 KA, C-series - 02 Nos (f) Street light timer using Item 23.03 (Contd/-) (e) MCCB 4 Pole 63 amps ,415 Volt of breaking capacity not less than 16 KA (Ics=100 % of Icu) with adjustable thermal setting - 01 Nos (Street Light ) (e) MCB SPN 10 Amp, 415 V, 10 KA, C-series - 02 Nos (f) Street light timer using Item 23.03 (Contd/-) (e) MCCB 4 Pole 63 amps ,415 Volt of breaking capacity not less than 16 KA (Ics=100 % of Icu) with adjustable thermal setting - 01 Nos (Street Light ) (e) MCB SPN 10 Amp, 415 V, 10 KA, C-series - 02 Nos (f) Street light timer using Item 23.03 (Contd/-) (e) MCCB 4 Pole 63 amps ,415 Volt of breaking capacity not less than 16 KA (Ics=100 % of Icu) with adjustable thermal setting - 01 Nos (Street Light ) (e) MCB SPN 10 Amp, 415 V, 10 KA, C-series - 02 Nos (f) Street light timer using Item 23.03 (Contd/-) (e) MCCB 4 Pole 63 amps ,415 Volt of breaking capacity not less than 16 KA (Ics=100 % of Icu) with adjustable thermal setting - 01 Nos (Street Light ) (e) MCB SPN 10 Amp, 415 V, 10 KA, C-series - 02 Nos (f) Street light timer using Item 23.03 (Contd/-) (e) MCCB 4 Pole 63 amps ,415 Volt of breaking capacity not less than 16 KA (Ics=100 % of Icu) with adjustable thermal setting - 01 Nos (Street Light ) (e) MCB SPN 10 Amp, 415 V, 10 KA, C-series - 02 Nos (f) Street light timer using Item 23.03 (Contd/-) (e) MCCB 4 Pole 63 amps ,415 Volt of breaking capacity not less than 16 KA (Ics=100 % of Icu) with adjustable thermal setting - 01 Nos (Street Light ) (e) MCB SPN 10 Amp, 415 V, 10 KA, C-series - 02 Nos (f) Street light timer using Item 23.03 (Contd/-) (e) MCCB 4 Pole 63 amps ,415 Volt of breaking capacity not less than 16 KA (Ics=100 % of Icu) with adjustable thermal setting - 01 Nos (Street Light ) (e) MCB SPN 10 Amp, 415 V, 10 KA, C-series - 02 Nos (f) Street light timer using Item 23.03 (Contd/-) (e) MCCB 4 Pole 63 amps ,415 Volt of breaking capacity not less than 16 KA (Ics=100 % of Icu) with adjustable thermal setting - 01 Nos (Street Light ) (e) MCB SPN 10 Amp, 415 V, 10 KA, C-series - 02 Nos (f) Street light timer using Item 23.03 (Contd/-) (e) MCCB 4 Pole 63 amps ,415 Volt of breaking capacity not less than 16 KA (Ics=100 % of Icu) with adjustable thermal setting - 01 Nos (Street Light ) (e) MCB SPN 10 Amp, 415 V, 10 KA, C-series - 02 Nos (f) Street light timer using Item 23.03 (Contd/-) (e) MCCB 4 Pole 63 amps ,415 Volt of breaking capacity not less than 16 KA (Ics=100 % of Icu) with adjustable thermal setting - 01 Nos (Street Light ) (e) MCB SPN 10 Amp, 415 V, 10 KA, C-series - 02 Nos (f) Street light timer using Item 23.03 (Contd/-) (e) MCCB 4 Pole 63 amps ,415 Volt of breaking capacity not less than 16 KA (Ics=100 % of Icu) with adjustable thermal setting - 01 Nos (Street Light ) (e) MCB SPN 10 Amp, 415 V, 10 KA, C-series - 02 Nos (f) Street light timer using Item 23.03 (Contd/-) (e) MCCB 4 Pole 63 amps ,415 Volt of breaking capacity not less than 16 KA (Ics=100 % of Icu) with adjustable thermal setting - 01 Nos (Street Light ) (e) MCB SPN 10 Amp, 415 V, 10 KA, C-series - 02 Nos (f) Street light timer using Item 23.03 (Contd/-) (e) MCCB 4 Pole 63 amps ,415 Volt of breaking capacity not less than 16 KA (Ics=100 % of Icu) with adjustable thermal setting - 01 Nos (Street Light ) (e) MCB SPN 10 Amp, 415 V, 10 KA, C-series - 02 Nos (f) Street light timer using Item 23.03 (Contd/-) (e) MCCB 4 Pole 63 amps ,415 Volt of breaking capacity not less than 16 KA (Ics=100 % of Icu) with adjustable thermal setting - 01 Nos (Street Light ) (e) MCB SPN 10 Amp, 415 V, 10 KA, C-series - 02 Nos (f) Street light timer using Item 23.03 (Contd/-) (e) MCCB 4 Pole 63 amps ,415 Volt of breaking capacity not less than 16 KA (Ics=100 % of Icu) with adjustable thermal setting - 01 Nos (Street Light ) (e) MCB SPN 10 Amp, 415 V, 10 KA, C-series - 02 Nos (f) Street light timer using Item 23.03 (Contd/-) (e) MCCB 4 Pole 63 amps ,415 Volt of breaking capacity not less than 16 KA (Ics=100 % of Icu) with adjustable thermal setting - 01 Nos (Street Light ) (e) MCB SPN 10 Amp, 415 V, 10 KA, C-series - 02 Nos (f) Street light timer using Item 23.03 (Contd/-) (e) MCCB 4 Pole 63 amps ,415 Volt of breaking capacity not less than 16 KA (Ics=100 % of Icu) with adjustable thermal setting - 01 Nos (Street Light ) (e) MCB SPN 10 Amp, 415 V, 10 KA, C-series - 02 Nos (f) Street light timer using Item 23.03 (Contd/-) (e) MCCB 4 Pole 63 amps ,415 Volt of breaking capacity not less than 16 KA (Ics=100 % of Icu) with adjustable thermal setting - 01 Nos (Street Light ) (e) MCB SPN 10 Amp, 415 V, 10 KA, C-series - 02 Nos (f) Street light timer using 0 Item 23.03 (Contd/-) (e) MCCB 4 Pole 63 amps ,415 Volt of breaking capacity not less than 16 KA (Ics=100 % of Icu) with adjustable thermal setting - 01 Nos (Street Light ) (e) MCB SPN 10 Amp, 415 V, 10 KA, C-series - 02 Nos (f) Street light timer using 0

40 0 Item 23.05 (Contd/-) (e) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (f) LED Indicating Lamps R,Y,B (g) Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switc Item 23.05 (Contd/-) (e) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (f) LED Indicating Lamps R,Y,B (g) Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switc Item 23.05 (Contd/-) (e) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (f) LED Indicating Lamps R,Y,B (g) Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switc 1 Item 23.05 (Contd/-) (e) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (f) LED Indicating Lamps R,Y,B (g) Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switc Item 23.05 (Contd/-) (e) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (f) LED Indicating Lamps R,Y,B (g) Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switc Item 23.05 (Contd/-) (e) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (f) LED Indicating Lamps R,Y,B (g) Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switc Item 23.05 (Contd/-) (e) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (f) LED Indicating Lamps R,Y,B (g) Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switc Item 23.05 (Contd/-) (e) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (f) LED Indicating Lamps R,Y,B (g) Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switc Item 23.05 (Contd/-) (e) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (f) LED Indicating Lamps R,Y,B (g) Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switc Item 23.05 (Contd/-) (e) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (f) LED Indicating Lamps R,Y,B (g) Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switc Item 23.05 (Contd/-) (e) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (f) LED Indicating Lamps R,Y,B (g) Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switc Item 23.05 (Contd/-) (e) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (f) LED Indicating Lamps R,Y,B (g) Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switc Item 23.05 (Contd/-) (e) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (f) LED Indicating Lamps R,Y,B (g) Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switc Item 23.05 (Contd/-) (e) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (f) LED Indicating Lamps R,Y,B (g) Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switc Item 23.05 (Contd/-) (e) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (f) LED Indicating Lamps R,Y,B (g) Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switc Item 23.05 (Contd/-) (e) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (f) LED Indicating Lamps R,Y,B (g) Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switc Item 23.05 (Contd/-) (e) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (f) LED Indicating Lamps R,Y,B (g) Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switc Item 23.05 (Contd/-) (e) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (f) LED Indicating Lamps R,Y,B (g) Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switc Item 23.05 (Contd/-) (e) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (f) LED Indicating Lamps R,Y,B (g) Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switc Item 23.05 (Contd/-) (e) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (f) LED Indicating Lamps R,Y,B (g) Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switc Item 23.05 (Contd/-) (e) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (f) LED Indicating Lamps R,Y,B (g) Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switc Item 23.05 (Contd/-) (e) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (f) LED Indicating Lamps R,Y,B (g) Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switc Item 23.05 (Contd/-) (e) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (f) LED Indicating Lamps R,Y,B (g) Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switc Item 23.05 (Contd/-) (e) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (f) LED Indicating Lamps R,Y,B (g) Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switc Item 23.05 (Contd/-) (e) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (f) LED Indicating Lamps R,Y,B (g) Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switc Item 23.05 (Contd/-) (e) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (f) LED Indicating Lamps R,Y,B (g) Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switc Item 23.05 (Contd/-) (e) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (f) LED Indicating Lamps R,Y,B (g) Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switc Item 23.05 (Contd/-) (e) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (f) LED Indicating Lamps R,Y,B (g) Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switc Item 23.05 (Contd/-) (e) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (f) LED Indicating Lamps R,Y,B (g) Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switc Item 23.05 (Contd/-) (e) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (f) LED Indicating Lamps R,Y,B (g) Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switc Item 23.05 (Contd/-) (e) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (f) LED Indicating Lamps R,Y,B (g) Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switc Item 23.05 (Contd/-) (e) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (f) LED Indicating Lamps R,Y,B (g) Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switc Item 23.05 (Contd/-) (e) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (f) LED Indicating Lamps R,Y,B (g) Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switc Item 23.05 (Contd/-) (e) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (f) LED Indicating Lamps R,Y,B (g) Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switc Item 23.05 (Contd/-) (e) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (f) LED Indicating Lamps R,Y,B (g) Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switc Item 23.05 (Contd/-) (e) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (f) LED Indicating Lamps R,Y,B (g) Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switc Item 23.05 (Contd/-) (e) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (f) LED Indicating Lamps R,Y,B (g) Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switc Item 23.05 (Contd/-) (e) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (f) LED Indicating Lamps R,Y,B (g) Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switc Item 23.05 (Contd/-) (e) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (f) LED Indicating Lamps R,Y,B (g) Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switc Item 23.05 (Contd/-) (e) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (f) LED Indicating Lamps R,Y,B (g) Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switc Item 23.05 (Contd/-) (e) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (f) LED Indicating Lamps R,Y,B (g) Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switc Item 23.05 (Contd/-) (e) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (f) LED Indicating Lamps R,Y,B (g) Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switc Item 23.05 (Contd/-) (e) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (f) LED Indicating Lamps R,Y,B (g) Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switc Item 23.05 (Contd/-) (e) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (f) LED Indicating Lamps R,Y,B (g) Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switc 0 Item 23.05 (Contd/-) (e) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (f) LED Indicating Lamps R,Y,B (g) Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switc 0

4 0 Item 23.07 (Contd/-) (e) Digital Voltmeter 0-500 V with selector switch- 01 No (f) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (g) LED Indicating Lamps R,Y,B - 01 set (h) Street light timer using Power contactor 32 Item 23.07 (Contd/-) (e) Digital Voltmeter 0-500 V with selector switch- 01 No (f) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (g) LED Indicating Lamps R,Y,B - 01 set (h) Street light timer using Power contactor 32 Item 23.07 (Contd/-) (e) Digital Voltmeter 0-500 V with selector switch- 01 No (f) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (g) LED Indicating Lamps R,Y,B - 01 set (h) Street light timer using Power contactor 32 1 Item 23.07 (Contd/-) (e) Digital Voltmeter 0-500 V with selector switch- 01 No (f) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (g) LED Indicating Lamps R,Y,B - 01 set (h) Street light timer using Power contactor 32 Item 23.07 (Contd/-) (e) Digital Voltmeter 0-500 V with selector switch- 01 No (f) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (g) LED Indicating Lamps R,Y,B - 01 set (h) Street light timer using Power contactor 32 Item 23.07 (Contd/-) (e) Digital Voltmeter 0-500 V with selector switch- 01 No (f) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (g) LED Indicating Lamps R,Y,B - 01 set (h) Street light timer using Power contactor 32 Item 23.07 (Contd/-) (e) Digital Voltmeter 0-500 V with selector switch- 01 No (f) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (g) LED Indicating Lamps R,Y,B - 01 set (h) Street light timer using Power contactor 32 Item 23.07 (Contd/-) (e) Digital Voltmeter 0-500 V with selector switch- 01 No (f) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (g) LED Indicating Lamps R,Y,B - 01 set (h) Street light timer using Power contactor 32 Item 23.07 (Contd/-) (e) Digital Voltmeter 0-500 V with selector switch- 01 No (f) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (g) LED Indicating Lamps R,Y,B - 01 set (h) Street light timer using Power contactor 32 Item 23.07 (Contd/-) (e) Digital Voltmeter 0-500 V with selector switch- 01 No (f) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (g) LED Indicating Lamps R,Y,B - 01 set (h) Street light timer using Power contactor 32 Item 23.07 (Contd/-) (e) Digital Voltmeter 0-500 V with selector switch- 01 No (f) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (g) LED Indicating Lamps R,Y,B - 01 set (h) Street light timer using Power contactor 32 Item 23.07 (Contd/-) (e) Digital Voltmeter 0-500 V with selector switch- 01 No (f) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (g) LED Indicating Lamps R,Y,B - 01 set (h) Street light timer using Power contactor 32 Item 23.07 (Contd/-) (e) Digital Voltmeter 0-500 V with selector switch- 01 No (f) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (g) LED Indicating Lamps R,Y,B - 01 set (h) Street light timer using Power contactor 32 Item 23.07 (Contd/-) (e) Digital Voltmeter 0-500 V with selector switch- 01 No (f) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (g) LED Indicating Lamps R,Y,B - 01 set (h) Street light timer using Power contactor 32 Item 23.07 (Contd/-) (e) Digital Voltmeter 0-500 V with selector switch- 01 No (f) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (g) LED Indicating Lamps R,Y,B - 01 set (h) Street light timer using Power contactor 32 Item 23.07 (Contd/-) (e) Digital Voltmeter 0-500 V with selector switch- 01 No (f) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (g) LED Indicating Lamps R,Y,B - 01 set (h) Street light timer using Power contactor 32 Item 23.07 (Contd/-) (e) Digital Voltmeter 0-500 V with selector switch- 01 No (f) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (g) LED Indicating Lamps R,Y,B - 01 set (h) Street light timer using Power contactor 32 Item 23.07 (Contd/-) (e) Digital Voltmeter 0-500 V with selector switch- 01 No (f) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (g) LED Indicating Lamps R,Y,B - 01 set (h) Street light timer using Power contactor 32 Item 23.07 (Contd/-) (e) Digital Voltmeter 0-500 V with selector switch- 01 No (f) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (g) LED Indicating Lamps R,Y,B - 01 set (h) Street light timer using Power contactor 32 Item 23.07 (Contd/-) (e) Digital Voltmeter 0-500 V with selector switch- 01 No (f) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (g) LED Indicating Lamps R,Y,B - 01 set (h) Street light timer using Power contactor 32 Item 23.07 (Contd/-) (e) Digital Voltmeter 0-500 V with selector switch- 01 No (f) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (g) LED Indicating Lamps R,Y,B - 01 set (h) Street light timer using Power contactor 32 Item 23.07 (Contd/-) (e) Digital Voltmeter 0-500 V with selector switch- 01 No (f) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (g) LED Indicating Lamps R,Y,B - 01 set (h) Street light timer using Power contactor 32 Item 23.07 (Contd/-) (e) Digital Voltmeter 0-500 V with selector switch- 01 No (f) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (g) LED Indicating Lamps R,Y,B - 01 set (h) Street light timer using Power contactor 32 Item 23.07 (Contd/-) (e) Digital Voltmeter 0-500 V with selector switch- 01 No (f) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (g) LED Indicating Lamps R,Y,B - 01 set (h) Street light timer using Power contactor 32 Item 23.07 (Contd/-) (e) Digital Voltmeter 0-500 V with selector switch- 01 No (f) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (g) LED Indicating Lamps R,Y,B - 01 set (h) Street light timer using Power contactor 32 Item 23.07 (Contd/-) (e) Digital Voltmeter 0-500 V with selector switch- 01 No (f) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (g) LED Indicating Lamps R,Y,B - 01 set (h) Street light timer using Power contactor 32 Item 23.07 (Contd/-) (e) Digital Voltmeter 0-500 V with selector switch- 01 No (f) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (g) LED Indicating Lamps R,Y,B - 01 set (h) Street light timer using Power contactor 32 Item 23.07 (Contd/-) (e) Digital Voltmeter 0-500 V with selector switch- 01 No (f) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (g) LED Indicating Lamps R,Y,B - 01 set (h) Street light timer using Power contactor 32 Item 23.07 (Contd/-) (e) Digital Voltmeter 0-500 V with selector switch- 01 No (f) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (g) LED Indicating Lamps R,Y,B - 01 set (h) Street light timer using Power contactor 32 Item 23.07 (Contd/-) (e) Digital Voltmeter 0-500 V with selector switch- 01 No (f) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (g) LED Indicating Lamps R,Y,B - 01 set (h) Street light timer using Power contactor 32 Item 23.07 (Contd/-) (e) Digital Voltmeter 0-500 V with selector switch- 01 No (f) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (g) LED Indicating Lamps R,Y,B - 01 set (h) Street light timer using Power contactor 32 Item 23.07 (Contd/-) (e) Digital Voltmeter 0-500 V with selector switch- 01 No (f) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (g) LED Indicating Lamps R,Y,B - 01 set (h) Street light timer using Power contactor 32 Item 23.07 (Contd/-) (e) Digital Voltmeter 0-500 V with selector switch- 01 No (f) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (g) LED Indicating Lamps R,Y,B - 01 set (h) Street light timer using Power contactor 32 Item 23.07 (Contd/-) (e) Digital Voltmeter 0-500 V with selector switch- 01 No (f) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (g) LED Indicating Lamps R,Y,B - 01 set (h) Street light timer using Power contactor 32 Item 23.07 (Contd/-) (e) Digital Voltmeter 0-500 V with selector switch- 01 No (f) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (g) LED Indicating Lamps R,Y,B - 01 set (h) Street light timer using Power contactor 32 Item 23.07 (Contd/-) (e) Digital Voltmeter 0-500 V with selector switch- 01 No (f) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (g) LED Indicating Lamps R,Y,B - 01 set (h) Street light timer using Power contactor 32 Item 23.07 (Contd/-) (e) Digital Voltmeter 0-500 V with selector switch- 01 No (f) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (g) LED Indicating Lamps R,Y,B - 01 set (h) Street light timer using Power contactor 32 Item 23.07 (Contd/-) (e) Digital Voltmeter 0-500 V with selector switch- 01 No (f) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (g) LED Indicating Lamps R,Y,B - 01 set (h) Street light timer using Power contactor 32 Item 23.07 (Contd/-) (e) Digital Voltmeter 0-500 V with selector switch- 01 No (f) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (g) LED Indicating Lamps R,Y,B - 01 set (h) Street light timer using Power contactor 32 Item 23.07 (Contd/-) (e) Digital Voltmeter 0-500 V with selector switch- 01 No (f) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (g) LED Indicating Lamps R,Y,B - 01 set (h) Street light timer using Power contactor 32 Item 23.07 (Contd/-) (e) Digital Voltmeter 0-500 V with selector switch- 01 No (f) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (g) LED Indicating Lamps R,Y,B - 01 set (h) Street light timer using Power contactor 32 Item 23.07 (Contd/-) (e) Digital Voltmeter 0-500 V with selector switch- 01 No (f) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (g) LED Indicating Lamps R,Y,B - 01 set (h) Street light timer using Power contactor 32 Item 23.07 (Contd/-) (e) Digital Voltmeter 0-500 V with selector switch- 01 No (f) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (g) LED Indicating Lamps R,Y,B - 01 set (h) Street light timer using Power contactor 32 Item 23.07 (Contd/-) (e) Digital Voltmeter 0-500 V with selector switch- 01 No (f) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (g) LED Indicating Lamps R,Y,B - 01 set (h) Street light timer using Power contactor 32 0 Item 23.07 (Contd/-) (e) Digital Voltmeter 0-500 V with selector switch- 01 No (f) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (g) LED Indicating Lamps R,Y,B - 01 set (h) Street light timer using Power contactor 32 0

440 0 Supply and fix GI pipe bracket of 1.5 m long and made out of 40 mm dia light grade pipe including MS clamp of size 25 x 4 mm - 02 Nos for holding one bracket, nut and bolt with washer duly painted with aluminium paint over one coat of primer of suitable Supply and fix GI pipe bracket of 1.5 m long and made out of 40 mm dia light grade pipe including MS clamp of size 25 x 4 mm - 02 Nos for holding one bracket, nut and bolt with washer duly painted with aluminium paint over one coat of primer of suitable Supply and fix GI pipe bracket of 1.5 m long and made out of 40 mm dia light grade pipe including MS clamp of size 25 x 4 mm - 02 Nos for holding one bracket, nut and bolt with washer duly painted with aluminium paint over one coat of primer of suitable 1 Supply and fix GI pipe bracket of 1.5 m long and made out of 40 mm dia light grade pipe including MS clamp of size 25 x 4 mm - 02 Nos for holding one bracket, nut and bolt with washer duly painted with aluminium paint over one coat of primer of suitable Supply and fix GI pipe bracket of 1.5 m long and made out of 40 mm dia light grade pipe including MS clamp of size 25 x 4 mm - 02 Nos for holding one bracket, nut and bolt with washer duly painted with aluminium paint over one coat of primer of suitable Supply and fix GI pipe bracket of 1.5 m long and made out of 40 mm dia light grade pipe including MS clamp of size 25 x 4 mm - 02 Nos for holding one bracket, nut and bolt with washer duly painted with aluminium paint over one coat of primer of suitable Supply and fix GI pipe bracket of 1.5 m long and made out of 40 mm dia light grade pipe including MS clamp of size 25 x 4 mm - 02 Nos for holding one bracket, nut and bolt with washer duly painted with aluminium paint over one coat of primer of suitable Supply and fix GI pipe bracket of 1.5 m long and made out of 40 mm dia light grade pipe including MS clamp of size 25 x 4 mm - 02 Nos for holding one bracket, nut and bolt with washer duly painted with aluminium paint over one coat of primer of suitable Supply and fix GI pipe bracket of 1.5 m long and made out of 40 mm dia light grade pipe including MS clamp of size 25 x 4 mm - 02 Nos for holding one bracket, nut and bolt with washer duly painted with aluminium paint over one coat of primer of suitable Supply and fix GI pipe bracket of 1.5 m long and made out of 40 mm dia light grade pipe including MS clamp of size 25 x 4 mm - 02 Nos for holding one bracket, nut and bolt with washer duly painted with aluminium paint over one coat of primer of suitable Supply and fix GI pipe bracket of 1.5 m long and made out of 40 mm dia light grade pipe including MS clamp of size 25 x 4 mm - 02 Nos for holding one bracket, nut and bolt with washer duly painted with aluminium paint over one coat of primer of suitable Supply and fix GI pipe bracket of 1.5 m long and made out of 40 mm dia light grade pipe including MS clamp of size 25 x 4 mm - 02 Nos for holding one bracket, nut and bolt with washer duly painted with aluminium paint over one coat of primer of suitable Supply and fix GI pipe bracket of 1.5 m long and made out of 40 mm dia light grade pipe including MS clamp of size 25 x 4 mm - 02 Nos for holding one bracket, nut and bolt with washer duly painted with aluminium paint over one coat of primer of suitable Supply and fix GI pipe bracket of 1.5 m long and made out of 40 mm dia light grade pipe including MS clamp of size 25 x 4 mm - 02 Nos for holding one bracket, nut and bolt with washer duly painted with aluminium paint over one coat of primer of suitable Supply and fix GI pipe bracket of 1.5 m long and made out of 40 mm dia light grade pipe including MS clamp of size 25 x 4 mm - 02 Nos for holding one bracket, nut and bolt with washer duly painted with aluminium paint over one coat of primer of suitable Supply and fix GI pipe bracket of 1.5 m long and made out of 40 mm dia light grade pipe including MS clamp of size 25 x 4 mm - 02 Nos for holding one bracket, nut and bolt with washer duly painted with aluminium paint over one coat of primer of suitable Supply and fix GI pipe bracket of 1.5 m long and made out of 40 mm dia light grade pipe including MS clamp of size 25 x 4 mm - 02 Nos for holding one bracket, nut and bolt with washer duly painted with aluminium paint over one coat of primer of suitable Supply and fix GI pipe bracket of 1.5 m long and made out of 40 mm dia light grade pipe including MS clamp of size 25 x 4 mm - 02 Nos for holding one bracket, nut and bolt with washer duly painted with aluminium paint over one coat of primer of suitable Supply and fix GI pipe bracket of 1.5 m long and made out of 40 mm dia light grade pipe including MS clamp of size 25 x 4 mm - 02 Nos for holding one bracket, nut and bolt with washer duly painted with aluminium paint over one coat of primer of suitable Supply and fix GI pipe bracket of 1.5 m long and made out of 40 mm dia light grade pipe including MS clamp of size 25 x 4 mm - 02 Nos for holding one bracket, nut and bolt with washer duly painted with aluminium paint over one coat of primer of suitable Supply and fix GI pipe bracket of 1.5 m long and made out of 40 mm dia light grade pipe including MS clamp of size 25 x 4 mm - 02 Nos for holding one bracket, nut and bolt with washer duly painted with aluminium paint over one coat of primer of suitable Supply and fix GI pipe bracket of 1.5 m long and made out of 40 mm dia light grade pipe including MS clamp of size 25 x 4 mm - 02 Nos for holding one bracket, nut and bolt with washer duly painted with aluminium paint over one coat of primer of suitable Supply and fix GI pipe bracket of 1.5 m long and made out of 40 mm dia light grade pipe including MS clamp of size 25 x 4 mm - 02 Nos for holding one bracket, nut and bolt with washer duly painted with aluminium paint over one coat of primer of suitable Supply and fix GI pipe bracket of 1.5 m long and made out of 40 mm dia light grade pipe including MS clamp of size 25 x 4 mm - 02 Nos for holding one bracket, nut and bolt with washer duly painted with aluminium paint over one coat of primer of suitable Supply and fix GI pipe bracket of 1.5 m long and made out of 40 mm dia light grade pipe including MS clamp of size 25 x 4 mm - 02 Nos for holding one bracket, nut and bolt with washer duly painted with aluminium paint over one coat of primer of suitable Supply and fix GI pipe bracket of 1.5 m long and made out of 40 mm dia light grade pipe including MS clamp of size 25 x 4 mm - 02 Nos for holding one bracket, nut and bolt with washer duly painted with aluminium paint over one coat of primer of suitable Supply and fix GI pipe bracket of 1.5 m long and made out of 40 mm dia light grade pipe including MS clamp of size 25 x 4 mm - 02 Nos for holding one bracket, nut and bolt with washer duly painted with aluminium paint over one coat of primer of suitable Supply and fix GI pipe bracket of 1.5 m long and made out of 40 mm dia light grade pipe including MS clamp of size 25 x 4 mm - 02 Nos for holding one bracket, nut and bolt with washer duly painted with aluminium paint over one coat of primer of suitable Supply and fix GI pipe bracket of 1.5 m long and made out of 40 mm dia light grade pipe including MS clamp of size 25 x 4 mm - 02 Nos for holding one bracket, nut and bolt with washer duly painted with aluminium paint over one coat of primer of suitable Supply and fix GI pipe bracket of 1.5 m long and made out of 40 mm dia light grade pipe including MS clamp of size 25 x 4 mm - 02 Nos for holding one bracket, nut and bolt with washer duly painted with aluminium paint over one coat of primer of suitable Supply and fix GI pipe bracket of 1.5 m long and made out of 40 mm dia light grade pipe including MS clamp of size 25 x 4 mm - 02 Nos for holding one bracket, nut and bolt with washer duly painted with aluminium paint over one coat of primer of suitable Supply and fix GI pipe bracket of 1.5 m long and made out of 40 mm dia light grade pipe including MS clamp of size 25 x 4 mm - 02 Nos for holding one bracket, nut and bolt with washer duly painted with aluminium paint over one coat of primer of suitable Supply and fix GI pipe bracket of 1.5 m long and made out of 40 mm dia light grade pipe including MS clamp of size 25 x 4 mm - 02 Nos for holding one bracket, nut and bolt with washer duly painted with aluminium paint over one coat of primer of suitable Supply and fix GI pipe bracket of 1.5 m long and made out of 40 mm dia light grade pipe including MS clamp of size 25 x 4 mm - 02 Nos for holding one bracket, nut and bolt with washer duly painted with aluminium paint over one coat of primer of suitable Supply and fix GI pipe bracket of 1.5 m long and made out of 40 mm dia light grade pipe including MS clamp of size 25 x 4 mm - 02 Nos for holding one bracket, nut and bolt with washer duly painted with aluminium paint over one coat of primer of suitable Supply and fix GI pipe bracket of 1.5 m long and made out of 40 mm dia light grade pipe including MS clamp of size 25 x 4 mm - 02 Nos for holding one bracket, nut and bolt with washer duly painted with aluminium paint over one coat of primer of suitable Supply and fix GI pipe bracket of 1.5 m long and made out of 40 mm dia light grade pipe including MS clamp of size 25 x 4 mm - 02 Nos for holding one bracket, nut and bolt with washer duly painted with aluminium paint over one coat of primer of suitable Supply and fix GI pipe bracket of 1.5 m long and made out of 40 mm dia light grade pipe including MS clamp of size 25 x 4 mm - 02 Nos for holding one bracket, nut and bolt with washer duly painted with aluminium paint over one coat of primer of suitable Supply and fix GI pipe bracket of 1.5 m long and made out of 40 mm dia light grade pipe including MS clamp of size 25 x 4 mm - 02 Nos for holding one bracket, nut and bolt with washer duly painted with aluminium paint over one coat of primer of suitable Supply and fix GI pipe bracket of 1.5 m long and made out of 40 mm dia light grade pipe including MS clamp of size 25 x 4 mm - 02 Nos for holding one bracket, nut and bolt with washer duly painted with aluminium paint over one coat of primer of suitable Supply and fix GI pipe bracket of 1.5 m long and made out of 40 mm dia light grade pipe including MS clamp of size 25 x 4 mm - 02 Nos for holding one bracket, nut and bolt with washer duly painted with aluminium paint over one coat of primer of suitable Supply and fix GI pipe bracket of 1.5 m long and made out of 40 mm dia light grade pipe including MS clamp of size 25 x 4 mm - 02 Nos for holding one bracket, nut and bolt with washer duly painted with aluminium paint over one coat of primer of suitable Supply and fix GI pipe bracket of 1.5 m long and made out of 40 mm dia light grade pipe including MS clamp of size 25 x 4 mm - 02 Nos for holding one bracket, nut and bolt with washer duly painted with aluminium paint over one coat of primer of suitable Supply and fix GI pipe bracket of 1.5 m long and made out of 40 mm dia light grade pipe including MS clamp of size 25 x 4 mm - 02 Nos for holding one bracket, nut and bolt with washer duly painted with aluminium paint over one coat of primer of suitable 0 Supply and fix GI pipe bracket of 1.5 m long and made out of 40 mm dia light grade pipe including MS clamp of size 25 x 4 mm - 02 Nos for holding one bracket, nut and bolt with washer duly painted with aluminium paint over one coat of primer of suitable 0

44 0 Supply and fixing of energy efficient LED street light fittings of 45 W capacity including electric connection, complete fitting including all accessories and following specification and all as directed by Engr-in-charge. (a) Lumen system efficacy of lum Supply and fixing of energy efficient LED street light fittings of 45 W capacity including electric connection, complete fitting including all accessories and following specification and all as directed by Engr-in-charge. (a) Lumen system efficacy of lum Supply and fixing of energy efficient LED street light fittings of 45 W capacity including electric connection, complete fitting including all accessories and following specification and all as directed by Engr-in-charge. (a) Lumen system efficacy of lum 1 Supply and fixing of energy efficient LED street light fittings of 45 W capacity including electric connection, complete fitting including all accessories and following specification and all as directed by Engr-in-charge. (a) Lumen system efficacy of lum Supply and fixing of energy efficient LED street light fittings of 45 W capacity including electric connection, complete fitting including all accessories and following specification and all as directed by Engr-in-charge. (a) Lumen system efficacy of lum Supply and fixing of energy efficient LED street light fittings of 45 W capacity including electric connection, complete fitting including all accessories and following specification and all as directed by Engr-in-charge. (a) Lumen system efficacy of lum Supply and fixing of energy efficient LED street light fittings of 45 W capacity including electric connection, complete fitting including all accessories and following specification and all as directed by Engr-in-charge. (a) Lumen system efficacy of lum Supply and fixing of energy efficient LED street light fittings of 45 W capacity including electric connection, complete fitting including all accessories and following specification and all as directed by Engr-in-charge. (a) Lumen system efficacy of lum Supply and fixing of energy efficient LED street light fittings of 45 W capacity including electric connection, complete fitting including all accessories and following specification and all as directed by Engr-in-charge. (a) Lumen system efficacy of lum Supply and fixing of energy efficient LED street light fittings of 45 W capacity including electric connection, complete fitting including all accessories and following specification and all as directed by Engr-in-charge. (a) Lumen system efficacy of lum Supply and fixing of energy efficient LED street light fittings of 45 W capacity including electric connection, complete fitting including all accessories and following specification and all as directed by Engr-in-charge. (a) Lumen system efficacy of lum Supply and fixing of energy efficient LED street light fittings of 45 W capacity including electric connection, complete fitting including all accessories and following specification and all as directed by Engr-in-charge. (a) Lumen system efficacy of lum Supply and fixing of energy efficient LED street light fittings of 45 W capacity including electric connection, complete fitting including all accessories and following specification and all as directed by Engr-in-charge. (a) Lumen system efficacy of lum Supply and fixing of energy efficient LED street light fittings of 45 W capacity including electric connection, complete fitting including all accessories and following specification and all as directed by Engr-in-charge. (a) Lumen system efficacy of lum Supply and fixing of energy efficient LED street light fittings of 45 W capacity including electric connection, complete fitting including all accessories and following specification and all as directed by Engr-in-charge. (a) Lumen system efficacy of lum Supply and fixing of energy efficient LED street light fittings of 45 W capacity including electric connection, complete fitting including all accessories and following specification and all as directed by Engr-in-charge. (a) Lumen system efficacy of lum Supply and fixing of energy efficient LED street light fittings of 45 W capacity including electric connection, complete fitting including all accessories and following specification and all as directed by Engr-in-charge. (a) Lumen system efficacy of lum Supply and fixing of energy efficient LED street light fittings of 45 W capacity including electric connection, complete fitting including all accessories and following specification and all as directed by Engr-in-charge. (a) Lumen system efficacy of lum Supply and fixing of energy efficient LED street light fittings of 45 W capacity including electric connection, complete fitting including all accessories and following specification and all as directed by Engr-in-charge. (a) Lumen system efficacy of lum Supply and fixing of energy efficient LED street light fittings of 45 W capacity including electric connection, complete fitting including all accessories and following specification and all as directed by Engr-in-charge. (a) Lumen system efficacy of lum Supply and fixing of energy efficient LED street light fittings of 45 W capacity including electric connection, complete fitting including all accessories and following specification and all as directed by Engr-in-charge. (a) Lumen system efficacy of lum Supply and fixing of energy efficient LED street light fittings of 45 W capacity including electric connection, complete fitting including all accessories and following specification and all as directed by Engr-in-charge. (a) Lumen system efficacy of lum Supply and fixing of energy efficient LED street light fittings of 45 W capacity including electric connection, complete fitting including all accessories and following specification and all as directed by Engr-in-charge. (a) Lumen system efficacy of lum Supply and fixing of energy efficient LED street light fittings of 45 W capacity including electric connection, complete fitting including all accessories and following specification and all as directed by Engr-in-charge. (a) Lumen system efficacy of lum Supply and fixing of energy efficient LED street light fittings of 45 W capacity including electric connection, complete fitting including all accessories and following specification and all as directed by Engr-in-charge. (a) Lumen system efficacy of lum Supply and fixing of energy efficient LED street light fittings of 45 W capacity including electric connection, complete fitting including all accessories and following specification and all as directed by Engr-in-charge. (a) Lumen system efficacy of lum Supply and fixing of energy efficient LED street light fittings of 45 W capacity including electric connection, complete fitting including all accessories and following specification and all as directed by Engr-in-charge. (a) Lumen system efficacy of lum Supply and fixing of energy efficient LED street light fittings of 45 W capacity including electric connection, complete fitting including all accessories and following specification and all as directed by Engr-in-charge. (a) Lumen system efficacy of lum Supply and fixing of energy efficient LED street light fittings of 45 W capacity including electric connection, complete fitting including all accessories and following specification and all as directed by Engr-in-charge. (a) Lumen system efficacy of lum Supply and fixing of energy efficient LED street light fittings of 45 W capacity including electric connection, complete fitting including all accessories and following specification and all as directed by Engr-in-charge. (a) Lumen system efficacy of lum Supply and fixing of energy efficient LED street light fittings of 45 W capacity including electric connection, complete fitting including all accessories and following specification and all as directed by Engr-in-charge. (a) Lumen system efficacy of lum Supply and fixing of energy efficient LED street light fittings of 45 W capacity including electric connection, complete fitting including all accessories and following specification and all as directed by Engr-in-charge. (a) Lumen system efficacy of lum Supply and fixing of energy efficient LED street light fittings of 45 W capacity including electric connection, complete fitting including all accessories and following specification and all as directed by Engr-in-charge. (a) Lumen system efficacy of lum Supply and fixing of energy efficient LED street light fittings of 45 W capacity including electric connection, complete fitting including all accessories and following specification and all as directed by Engr-in-charge. (a) Lumen system efficacy of lum Supply and fixing of energy efficient LED street light fittings of 45 W capacity including electric connection, complete fitting including all accessories and following specification and all as directed by Engr-in-charge. (a) Lumen system efficacy of lum Supply and fixing of energy efficient LED street light fittings of 45 W capacity including electric connection, complete fitting including all accessories and following specification and all as directed by Engr-in-charge. (a) Lumen system efficacy of lum Supply and fixing of energy efficient LED street light fittings of 45 W capacity including electric connection, complete fitting including all accessories and following specification and all as directed by Engr-in-charge. (a) Lumen system efficacy of lum Supply and fixing of energy efficient LED street light fittings of 45 W capacity including electric connection, complete fitting including all accessories and following specification and all as directed by Engr-in-charge. (a) Lumen system efficacy of lum Supply and fixing of energy efficient LED street light fittings of 45 W capacity including electric connection, complete fitting including all accessories and following specification and all as directed by Engr-in-charge. (a) Lumen system efficacy of lum Supply and fixing of energy efficient LED street light fittings of 45 W capacity including electric connection, complete fitting including all accessories and following specification and all as directed by Engr-in-charge. (a) Lumen system efficacy of lum Supply and fixing of energy efficient LED street light fittings of 45 W capacity including electric connection, complete fitting including all accessories and following specification and all as directed by Engr-in-charge. (a) Lumen system efficacy of lum Supply and fixing of energy efficient LED street light fittings of 45 W capacity including electric connection, complete fitting including all accessories and following specification and all as directed by Engr-in-charge. (a) Lumen system efficacy of lum Supply and fixing of energy efficient LED street light fittings of 45 W capacity including electric connection, complete fitting including all accessories and following specification and all as directed by Engr-in-charge. (a) Lumen system efficacy of lum Supply and fixing of energy efficient LED street light fittings of 45 W capacity including electric connection, complete fitting including all accessories and following specification and all as directed by Engr-in-charge. (a) Lumen system efficacy of lum 0 Supply and fixing of energy efficient LED street light fittings of 45 W capacity including electric connection, complete fitting including all accessories and following specification and all as directed by Engr-in-charge. (a) Lumen system efficacy of lum 0

6 0 Supply and fixing junction box complete with fixing accessories and following specification and all as directed by Engr-in-charge. (a) Junction box should be insulated and made out of polycarbonate with glass fiber re-inforced material. (b) Size Min 210 Supply and fixing junction box complete with fixing accessories and following specification and all as directed by Engr-in-charge. (a) Junction box should be insulated and made out of polycarbonate with glass fiber re-inforced material. (b) Size Min 210 Supply and fixing junction box complete with fixing accessories and following specification and all as directed by Engr-in-charge. (a) Junction box should be insulated and made out of polycarbonate with glass fiber re-inforced material. (b) Size Min 210 1 Supply and fixing junction box complete with fixing accessories and following specification and all as directed by Engr-in-charge. (a) Junction box should be insulated and made out of polycarbonate with glass fiber re-inforced material. (b) Size Min 210 Supply and fixing junction box complete with fixing accessories and following specification and all as directed by Engr-in-charge. (a) Junction box should be insulated and made out of polycarbonate with glass fiber re-inforced material. (b) Size Min 210 Supply and fixing junction box complete with fixing accessories and following specification and all as directed by Engr-in-charge. (a) Junction box should be insulated and made out of polycarbonate with glass fiber re-inforced material. (b) Size Min 210 Supply and fixing junction box complete with fixing accessories and following specification and all as directed by Engr-in-charge. (a) Junction box should be insulated and made out of polycarbonate with glass fiber re-inforced material. (b) Size Min 210 Supply and fixing junction box complete with fixing accessories and following specification and all as directed by Engr-in-charge. (a) Junction box should be insulated and made out of polycarbonate with glass fiber re-inforced material. (b) Size Min 210 Supply and fixing junction box complete with fixing accessories and following specification and all as directed by Engr-in-charge. (a) Junction box should be insulated and made out of polycarbonate with glass fiber re-inforced material. (b) Size Min 210 Supply and fixing junction box complete with fixing accessories and following specification and all as directed by Engr-in-charge. (a) Junction box should be insulated and made out of polycarbonate with glass fiber re-inforced material. (b) Size Min 210 Supply and fixing junction box complete with fixing accessories and following specification and all as directed by Engr-in-charge. (a) Junction box should be insulated and made out of polycarbonate with glass fiber re-inforced material. (b) Size Min 210 Supply and fixing junction box complete with fixing accessories and following specification and all as directed by Engr-in-charge. (a) Junction box should be insulated and made out of polycarbonate with glass fiber re-inforced material. (b) Size Min 210 Supply and fixing junction box complete with fixing accessories and following specification and all as directed by Engr-in-charge. (a) Junction box should be insulated and made out of polycarbonate with glass fiber re-inforced material. (b) Size Min 210 Supply and fixing junction box complete with fixing accessories and following specification and all as directed by Engr-in-charge. (a) Junction box should be insulated and made out of polycarbonate with glass fiber re-inforced material. (b) Size Min 210 Supply and fixing junction box complete with fixing accessories and following specification and all as directed by Engr-in-charge. (a) Junction box should be insulated and made out of polycarbonate with glass fiber re-inforced material. (b) Size Min 210 Supply and fixing junction box complete with fixing accessories and following specification and all as directed by Engr-in-charge. (a) Junction box should be insulated and made out of polycarbonate with glass fiber re-inforced material. (b) Size Min 210 Supply and fixing junction box complete with fixing accessories and following specification and all as directed by Engr-in-charge. (a) Junction box should be insulated and made out of polycarbonate with glass fiber re-inforced material. (b) Size Min 210 Supply and fixing junction box complete with fixing accessories and following specification and all as directed by Engr-in-charge. (a) Junction box should be insulated and made out of polycarbonate with glass fiber re-inforced material. (b) Size Min 210 Supply and fixing junction box complete with fixing accessories and following specification and all as directed by Engr-in-charge. (a) Junction box should be insulated and made out of polycarbonate with glass fiber re-inforced material. (b) Size Min 210 Supply and fixing junction box complete with fixing accessories and following specification and all as directed by Engr-in-charge. (a) Junction box should be insulated and made out of polycarbonate with glass fiber re-inforced material. (b) Size Min 210 Supply and fixing junction box complete with fixing accessories and following specification and all as directed by Engr-in-charge. (a) Junction box should be insulated and made out of polycarbonate with glass fiber re-inforced material. (b) Size Min 210 Supply and fixing junction box complete with fixing accessories and following specification and all as directed by Engr-in-charge. (a) Junction box should be insulated and made out of polycarbonate with glass fiber re-inforced material. (b) Size Min 210 Supply and fixing junction box complete with fixing accessories and following specification and all as directed by Engr-in-charge. (a) Junction box should be insulated and made out of polycarbonate with glass fiber re-inforced material. (b) Size Min 210 Supply and fixing junction box complete with fixing accessories and following specification and all as directed by Engr-in-charge. (a) Junction box should be insulated and made out of polycarbonate with glass fiber re-inforced material. (b) Size Min 210 Supply and fixing junction box complete with fixing accessories and following specification and all as directed by Engr-in-charge. (a) Junction box should be insulated and made out of polycarbonate with glass fiber re-inforced material. (b) Size Min 210 Supply and fixing junction box complete with fixing accessories and following specification and all as directed by Engr-in-charge. (a) Junction box should be insulated and made out of polycarbonate with glass fiber re-inforced material. (b) Size Min 210 Supply and fixing junction box complete with fixing accessories and following specification and all as directed by Engr-in-charge. (a) Junction box should be insulated and made out of polycarbonate with glass fiber re-inforced material. (b) Size Min 210 Supply and fixing junction box complete with fixing accessories and following specification and all as directed by Engr-in-charge. (a) Junction box should be insulated and made out of polycarbonate with glass fiber re-inforced material. (b) Size Min 210 Supply and fixing junction box complete with fixing accessories and following specification and all as directed by Engr-in-charge. (a) Junction box should be insulated and made out of polycarbonate with glass fiber re-inforced material. (b) Size Min 210 Supply and fixing junction box complete with fixing accessories and following specification and all as directed by Engr-in-charge. (a) Junction box should be insulated and made out of polycarbonate with glass fiber re-inforced material. (b) Size Min 210 Supply and fixing junction box complete with fixing accessories and following specification and all as directed by Engr-in-charge. (a) Junction box should be insulated and made out of polycarbonate with glass fiber re-inforced material. (b) Size Min 210 Supply and fixing junction box complete with fixing accessories and following specification and all as directed by Engr-in-charge. (a) Junction box should be insulated and made out of polycarbonate with glass fiber re-inforced material. (b) Size Min 210 Supply and fixing junction box complete with fixing accessories and following specification and all as directed by Engr-in-charge. (a) Junction box should be insulated and made out of polycarbonate with glass fiber re-inforced material. (b) Size Min 210 Supply and fixing junction box complete with fixing accessories and following specification and all as directed by Engr-in-charge. (a) Junction box should be insulated and made out of polycarbonate with glass fiber re-inforced material. (b) Size Min 210 Supply and fixing junction box complete with fixing accessories and following specification and all as directed by Engr-in-charge. (a) Junction box should be insulated and made out of polycarbonate with glass fiber re-inforced material. (b) Size Min 210 Supply and fixing junction box complete with fixing accessories and following specification and all as directed by Engr-in-charge. (a) Junction box should be insulated and made out of polycarbonate with glass fiber re-inforced material. (b) Size Min 210 Supply and fixing junction box complete with fixing accessories and following specification and all as directed by Engr-in-charge. (a) Junction box should be insulated and made out of polycarbonate with glass fiber re-inforced material. (b) Size Min 210 Supply and fixing junction box complete with fixing accessories and following specification and all as directed by Engr-in-charge. (a) Junction box should be insulated and made out of polycarbonate with glass fiber re-inforced material. (b) Size Min 210 Supply and fixing junction box complete with fixing accessories and following specification and all as directed by Engr-in-charge. (a) Junction box should be insulated and made out of polycarbonate with glass fiber re-inforced material. (b) Size Min 210 Supply and fixing junction box complete with fixing accessories and following specification and all as directed by Engr-in-charge. (a) Junction box should be insulated and made out of polycarbonate with glass fiber re-inforced material. (b) Size Min 210 Supply and fixing junction box complete with fixing accessories and following specification and all as directed by Engr-in-charge. (a) Junction box should be insulated and made out of polycarbonate with glass fiber re-inforced material. (b) Size Min 210 Supply and fixing junction box complete with fixing accessories and following specification and all as directed by Engr-in-charge. (a) Junction box should be insulated and made out of polycarbonate with glass fiber re-inforced material. (b) Size Min 210 Supply and fixing junction box complete with fixing accessories and following specification and all as directed by Engr-in-charge. (a) Junction box should be insulated and made out of polycarbonate with glass fiber re-inforced material. (b) Size Min 210 Supply and fixing junction box complete with fixing accessories and following specification and all as directed by Engr-in-charge. (a) Junction box should be insulated and made out of polycarbonate with glass fiber re-inforced material. (b) Size Min 210 0 Supply and fixing junction box complete with fixing accessories and following specification and all as directed by Engr-in-charge. (a) Junction box should be insulated and made out of polycarbonate with glass fiber re-inforced material. (b) Size Min 210 0

1500 0 M&L Decorative LED post top lantern (PTL) luminior with die cast aluminium spigot, spun aluminium powder coated top cover clear/opal acralic difusser LED light fitting of 25 watt including LED lamp complete all as specified & directed. 23.12 M&L Decorative LED post top lantern (PTL) luminior with die cast aluminium spigot, spun aluminium powder coated top cover clear/opal acralic difusser LED light fitting of 25 watt including LED lamp complete all as specified & directed. 23.12 M&L Decorative LED post top lantern (PTL) luminior with die cast aluminium spigot, spun aluminium powder coated top cover clear/opal acralic difusser LED light fitting of 25 watt including LED lamp complete all as specified & directed. 23.12 1 M&L Decorative LED post top lantern (PTL) luminior with die cast aluminium spigot, spun aluminium powder coated top cover clear/opal acralic difusser LED light fitting of 25 watt including LED lamp complete all as specified & directed. 23.12 M&L Decorative LED post top lantern (PTL) luminior with die cast aluminium spigot, spun aluminium powder coated top cover clear/opal acralic difusser LED light fitting of 25 watt including LED lamp complete all as specified & directed. 23.12 M&L Decorative LED post top lantern (PTL) luminior with die cast aluminium spigot, spun aluminium powder coated top cover clear/opal acralic difusser LED light fitting of 25 watt including LED lamp complete all as specified & directed. 23.12 M&L Decorative LED post top lantern (PTL) luminior with die cast aluminium spigot, spun aluminium powder coated top cover clear/opal acralic difusser LED light fitting of 25 watt including LED lamp complete all as specified & directed. 23.12 M&L Decorative LED post top lantern (PTL) luminior with die cast aluminium spigot, spun aluminium powder coated top cover clear/opal acralic difusser LED light fitting of 25 watt including LED lamp complete all as specified & directed. 23.12 M&L Decorative LED post top lantern (PTL) luminior with die cast aluminium spigot, spun aluminium powder coated top cover clear/opal acralic difusser LED light fitting of 25 watt including LED lamp complete all as specified & directed. 23.12 M&L Decorative LED post top lantern (PTL) luminior with die cast aluminium spigot, spun aluminium powder coated top cover clear/opal acralic difusser LED light fitting of 25 watt including LED lamp complete all as specified & directed. 23.12 M&L Decorative LED post top lantern (PTL) luminior with die cast aluminium spigot, spun aluminium powder coated top cover clear/opal acralic difusser LED light fitting of 25 watt including LED lamp complete all as specified & directed. 23.12 M&L Decorative LED post top lantern (PTL) luminior with die cast aluminium spigot, spun aluminium powder coated top cover clear/opal acralic difusser LED light fitting of 25 watt including LED lamp complete all as specified & directed. 23.12 M&L Decorative LED post top lantern (PTL) luminior with die cast aluminium spigot, spun aluminium powder coated top cover clear/opal acralic difusser LED light fitting of 25 watt including LED lamp complete all as specified & directed. 23.12 M&L Decorative LED post top lantern (PTL) luminior with die cast aluminium spigot, spun aluminium powder coated top cover clear/opal acralic difusser LED light fitting of 25 watt including LED lamp complete all as specified & directed. 23.12 M&L Decorative LED post top lantern (PTL) luminior with die cast aluminium spigot, spun aluminium powder coated top cover clear/opal acralic difusser LED light fitting of 25 watt including LED lamp complete all as specified & directed. 23.12 M&L Decorative LED post top lantern (PTL) luminior with die cast aluminium spigot, spun aluminium powder coated top cover clear/opal acralic difusser LED light fitting of 25 watt including LED lamp complete all as specified & directed. 23.12 M&L Decorative LED post top lantern (PTL) luminior with die cast aluminium spigot, spun aluminium powder coated top cover clear/opal acralic difusser LED light fitting of 25 watt including LED lamp complete all as specified & directed. 23.12 M&L Decorative LED post top lantern (PTL) luminior with die cast aluminium spigot, spun aluminium powder coated top cover clear/opal acralic difusser LED light fitting of 25 watt including LED lamp complete all as specified & directed. 23.12 M&L Decorative LED post top lantern (PTL) luminior with die cast aluminium spigot, spun aluminium powder coated top cover clear/opal acralic difusser LED light fitting of 25 watt including LED lamp complete all as specified & directed. 23.12 M&L Decorative LED post top lantern (PTL) luminior with die cast aluminium spigot, spun aluminium powder coated top cover clear/opal acralic difusser LED light fitting of 25 watt including LED lamp complete all as specified & directed. 23.12 M&L Decorative LED post top lantern (PTL) luminior with die cast aluminium spigot, spun aluminium powder coated top cover clear/opal acralic difusser LED light fitting of 25 watt including LED lamp complete all as specified & directed. 23.12 M&L Decorative LED post top lantern (PTL) luminior with die cast aluminium spigot, spun aluminium powder coated top cover clear/opal acralic difusser LED light fitting of 25 watt including LED lamp complete all as specified & directed. 23.12 M&L Decorative LED post top lantern (PTL) luminior with die cast aluminium spigot, spun aluminium powder coated top cover clear/opal acralic difusser LED light fitting of 25 watt including LED lamp complete all as specified & directed. 23.12 M&L Decorative LED post top lantern (PTL) luminior with die cast aluminium spigot, spun aluminium powder coated top cover clear/opal acralic difusser LED light fitting of 25 watt including LED lamp complete all as specified & directed. 23.12 M&L Decorative LED post top lantern (PTL) luminior with die cast aluminium spigot, spun aluminium powder coated top cover clear/opal acralic difusser LED light fitting of 25 watt including LED lamp complete all as specified & directed. 23.12 M&L Decorative LED post top lantern (PTL) luminior with die cast aluminium spigot, spun aluminium powder coated top cover clear/opal acralic difusser LED light fitting of 25 watt including LED lamp complete all as specified & directed. 23.12 M&L Decorative LED post top lantern (PTL) luminior with die cast aluminium spigot, spun aluminium powder coated top cover clear/opal acralic difusser LED light fitting of 25 watt including LED lamp complete all as specified & directed. 23.12 M&L Decorative LED post top lantern (PTL) luminior with die cast aluminium spigot, spun aluminium powder coated top cover clear/opal acralic difusser LED light fitting of 25 watt including LED lamp complete all as specified & directed. 23.12 M&L Decorative LED post top lantern (PTL) luminior with die cast aluminium spigot, spun aluminium powder coated top cover clear/opal acralic difusser LED light fitting of 25 watt including LED lamp complete all as specified & directed. 23.12 M&L Decorative LED post top lantern (PTL) luminior with die cast aluminium spigot, spun aluminium powder coated top cover clear/opal acralic difusser LED light fitting of 25 watt including LED lamp complete all as specified & directed. 23.12 M&L Decorative LED post top lantern (PTL) luminior with die cast aluminium spigot, spun aluminium powder coated top cover clear/opal acralic difusser LED light fitting of 25 watt including LED lamp complete all as specified & directed. 23.12 M&L Decorative LED post top lantern (PTL) luminior with die cast aluminium spigot, spun aluminium powder coated top cover clear/opal acralic difusser LED light fitting of 25 watt including LED lamp complete all as specified & directed. 23.12 M&L Decorative LED post top lantern (PTL) luminior with die cast aluminium spigot, spun aluminium powder coated top cover clear/opal acralic difusser LED light fitting of 25 watt including LED lamp complete all as specified & directed. 23.12 M&L Decorative LED post top lantern (PTL) luminior with die cast aluminium spigot, spun aluminium powder coated top cover clear/opal acralic difusser LED light fitting of 25 watt including LED lamp complete all as specified & directed. 23.12 M&L Decorative LED post top lantern (PTL) luminior with die cast aluminium spigot, spun aluminium powder coated top cover clear/opal acralic difusser LED light fitting of 25 watt including LED lamp complete all as specified & directed. 23.12 M&L Decorative LED post top lantern (PTL) luminior with die cast aluminium spigot, spun aluminium powder coated top cover clear/opal acralic difusser LED light fitting of 25 watt including LED lamp complete all as specified & directed. 23.12 M&L Decorative LED post top lantern (PTL) luminior with die cast aluminium spigot, spun aluminium powder coated top cover clear/opal acralic difusser LED light fitting of 25 watt including LED lamp complete all as specified & directed. 23.12 M&L Decorative LED post top lantern (PTL) luminior with die cast aluminium spigot, spun aluminium powder coated top cover clear/opal acralic difusser LED light fitting of 25 watt including LED lamp complete all as specified & directed. 23.12 M&L Decorative LED post top lantern (PTL) luminior with die cast aluminium spigot, spun aluminium powder coated top cover clear/opal acralic difusser LED light fitting of 25 watt including LED lamp complete all as specified & directed. 23.12 M&L Decorative LED post top lantern (PTL) luminior with die cast aluminium spigot, spun aluminium powder coated top cover clear/opal acralic difusser LED light fitting of 25 watt including LED lamp complete all as specified & directed. 23.12 M&L Decorative LED post top lantern (PTL) luminior with die cast aluminium spigot, spun aluminium powder coated top cover clear/opal acralic difusser LED light fitting of 25 watt including LED lamp complete all as specified & directed. 23.12 M&L Decorative LED post top lantern (PTL) luminior with die cast aluminium spigot, spun aluminium powder coated top cover clear/opal acralic difusser LED light fitting of 25 watt including LED lamp complete all as specified & directed. 23.12 M&L Decorative LED post top lantern (PTL) luminior with die cast aluminium spigot, spun aluminium powder coated top cover clear/opal acralic difusser LED light fitting of 25 watt including LED lamp complete all as specified & directed. 23.12 M&L Decorative LED post top lantern (PTL) luminior with die cast aluminium spigot, spun aluminium powder coated top cover clear/opal acralic difusser LED light fitting of 25 watt including LED lamp complete all as specified & directed. 23.12 0 M&L Decorative LED post top lantern (PTL) luminior with die cast aluminium spigot, spun aluminium powder coated top cover clear/opal acralic difusser LED light fitting of 25 watt including LED lamp complete all as specified & directed. 23.12 0

16500 0 Supply and connecting three core cord flexible wire, copper conductor multistranded, PVC insulated and overall PVC sheathed of size 1.5 Sqmm 1100 Volt , draw through LT steel tubular poles for connection to street light from junction box as directed by Supply and connecting three core cord flexible wire, copper conductor multistranded, PVC insulated and overall PVC sheathed of size 1.5 Sqmm 1100 Volt , draw through LT steel tubular poles for connection to street light from junction box as directed by Supply and connecting three core cord flexible wire, copper conductor multistranded, PVC insulated and overall PVC sheathed of size 1.5 Sqmm 1100 Volt , draw through LT steel tubular poles for connection to street light from junction box as directed by 1 Supply and connecting three core cord flexible wire, copper conductor multistranded, PVC insulated and overall PVC sheathed of size 1.5 Sqmm 1100 Volt , draw through LT steel tubular poles for connection to street light from junction box as directed by Supply and connecting three core cord flexible wire, copper conductor multistranded, PVC insulated and overall PVC sheathed of size 1.5 Sqmm 1100 Volt , draw through LT steel tubular poles for connection to street light from junction box as directed by Supply and connecting three core cord flexible wire, copper conductor multistranded, PVC insulated and overall PVC sheathed of size 1.5 Sqmm 1100 Volt , draw through LT steel tubular poles for connection to street light from junction box as directed by Supply and connecting three core cord flexible wire, copper conductor multistranded, PVC insulated and overall PVC sheathed of size 1.5 Sqmm 1100 Volt , draw through LT steel tubular poles for connection to street light from junction box as directed by Supply and connecting three core cord flexible wire, copper conductor multistranded, PVC insulated and overall PVC sheathed of size 1.5 Sqmm 1100 Volt , draw through LT steel tubular poles for connection to street light from junction box as directed by Supply and connecting three core cord flexible wire, copper conductor multistranded, PVC insulated and overall PVC sheathed of size 1.5 Sqmm 1100 Volt , draw through LT steel tubular poles for connection to street light from junction box as directed by Supply and connecting three core cord flexible wire, copper conductor multistranded, PVC insulated and overall PVC sheathed of size 1.5 Sqmm 1100 Volt , draw through LT steel tubular poles for connection to street light from junction box as directed by Supply and connecting three core cord flexible wire, copper conductor multistranded, PVC insulated and overall PVC sheathed of size 1.5 Sqmm 1100 Volt , draw through LT steel tubular poles for connection to street light from junction box as directed by Supply and connecting three core cord flexible wire, copper conductor multistranded, PVC insulated and overall PVC sheathed of size 1.5 Sqmm 1100 Volt , draw through LT steel tubular poles for connection to street light from junction box as directed by Supply and connecting three core cord flexible wire, copper conductor multistranded, PVC insulated and overall PVC sheathed of size 1.5 Sqmm 1100 Volt , draw through LT steel tubular poles for connection to street light from junction box as directed by Supply and connecting three core cord flexible wire, copper conductor multistranded, PVC insulated and overall PVC sheathed of size 1.5 Sqmm 1100 Volt , draw through LT steel tubular poles for connection to street light from junction box as directed by Supply and connecting three core cord flexible wire, copper conductor multistranded, PVC insulated and overall PVC sheathed of size 1.5 Sqmm 1100 Volt , draw through LT steel tubular poles for connection to street light from junction box as directed by Supply and connecting three core cord flexible wire, copper conductor multistranded, PVC insulated and overall PVC sheathed of size 1.5 Sqmm 1100 Volt , draw through LT steel tubular poles for connection to street light from junction box as directed by Supply and connecting three core cord flexible wire, copper conductor multistranded, PVC insulated and overall PVC sheathed of size 1.5 Sqmm 1100 Volt , draw through LT steel tubular poles for connection to street light from junction box as directed by Supply and connecting three core cord flexible wire, copper conductor multistranded, PVC insulated and overall PVC sheathed of size 1.5 Sqmm 1100 Volt , draw through LT steel tubular poles for connection to street light from junction box as directed by Supply and connecting three core cord flexible wire, copper conductor multistranded, PVC insulated and overall PVC sheathed of size 1.5 Sqmm 1100 Volt , draw through LT steel tubular poles for connection to street light from junction box as directed by Supply and connecting three core cord flexible wire, copper conductor multistranded, PVC insulated and overall PVC sheathed of size 1.5 Sqmm 1100 Volt , draw through LT steel tubular poles for connection to street light from junction box as directed by Supply and connecting three core cord flexible wire, copper conductor multistranded, PVC insulated and overall PVC sheathed of size 1.5 Sqmm 1100 Volt , draw through LT steel tubular poles for connection to street light from junction box as directed by Supply and connecting three core cord flexible wire, copper conductor multistranded, PVC insulated and overall PVC sheathed of size 1.5 Sqmm 1100 Volt , draw through LT steel tubular poles for connection to street light from junction box as directed by Supply and connecting three core cord flexible wire, copper conductor multistranded, PVC insulated and overall PVC sheathed of size 1.5 Sqmm 1100 Volt , draw through LT steel tubular poles for connection to street light from junction box as directed by Supply and connecting three core cord flexible wire, copper conductor multistranded, PVC insulated and overall PVC sheathed of size 1.5 Sqmm 1100 Volt , draw through LT steel tubular poles for connection to street light from junction box as directed by Supply and connecting three core cord flexible wire, copper conductor multistranded, PVC insulated and overall PVC sheathed of size 1.5 Sqmm 1100 Volt , draw through LT steel tubular poles for connection to street light from junction box as directed by Supply and connecting three core cord flexible wire, copper conductor multistranded, PVC insulated and overall PVC sheathed of size 1.5 Sqmm 1100 Volt , draw through LT steel tubular poles for connection to street light from junction box as directed by Supply and connecting three core cord flexible wire, copper conductor multistranded, PVC insulated and overall PVC sheathed of size 1.5 Sqmm 1100 Volt , draw through LT steel tubular poles for connection to street light from junction box as directed by Supply and connecting three core cord flexible wire, copper conductor multistranded, PVC insulated and overall PVC sheathed of size 1.5 Sqmm 1100 Volt , draw through LT steel tubular poles for connection to street light from junction box as directed by Supply and connecting three core cord flexible wire, copper conductor multistranded, PVC insulated and overall PVC sheathed of size 1.5 Sqmm 1100 Volt , draw through LT steel tubular poles for connection to street light from junction box as directed by Supply and connecting three core cord flexible wire, copper conductor multistranded, PVC insulated and overall PVC sheathed of size 1.5 Sqmm 1100 Volt , draw through LT steel tubular poles for connection to street light from junction box as directed by Supply and connecting three core cord flexible wire, copper conductor multistranded, PVC insulated and overall PVC sheathed of size 1.5 Sqmm 1100 Volt , draw through LT steel tubular poles for connection to street light from junction box as directed by Supply and connecting three core cord flexible wire, copper conductor multistranded, PVC insulated and overall PVC sheathed of size 1.5 Sqmm 1100 Volt , draw through LT steel tubular poles for connection to street light from junction box as directed by Supply and connecting three core cord flexible wire, copper conductor multistranded, PVC insulated and overall PVC sheathed of size 1.5 Sqmm 1100 Volt , draw through LT steel tubular poles for connection to street light from junction box as directed by Supply and connecting three core cord flexible wire, copper conductor multistranded, PVC insulated and overall PVC sheathed of size 1.5 Sqmm 1100 Volt , draw through LT steel tubular poles for connection to street light from junction box as directed by Supply and connecting three core cord flexible wire, copper conductor multistranded, PVC insulated and overall PVC sheathed of size 1.5 Sqmm 1100 Volt , draw through LT steel tubular poles for connection to street light from junction box as directed by Supply and connecting three core cord flexible wire, copper conductor multistranded, PVC insulated and overall PVC sheathed of size 1.5 Sqmm 1100 Volt , draw through LT steel tubular poles for connection to street light from junction box as directed by Supply and connecting three core cord flexible wire, copper conductor multistranded, PVC insulated and overall PVC sheathed of size 1.5 Sqmm 1100 Volt , draw through LT steel tubular poles for connection to street light from junction box as directed by Supply and connecting three core cord flexible wire, copper conductor multistranded, PVC insulated and overall PVC sheathed of size 1.5 Sqmm 1100 Volt , draw through LT steel tubular poles for connection to street light from junction box as directed by Supply and connecting three core cord flexible wire, copper conductor multistranded, PVC insulated and overall PVC sheathed of size 1.5 Sqmm 1100 Volt , draw through LT steel tubular poles for connection to street light from junction box as directed by Supply and connecting three core cord flexible wire, copper conductor multistranded, PVC insulated and overall PVC sheathed of size 1.5 Sqmm 1100 Volt , draw through LT steel tubular poles for connection to street light from junction box as directed by Supply and connecting three core cord flexible wire, copper conductor multistranded, PVC insulated and overall PVC sheathed of size 1.5 Sqmm 1100 Volt , draw through LT steel tubular poles for connection to street light from junction box as directed by Supply and connecting three core cord flexible wire, copper conductor multistranded, PVC insulated and overall PVC sheathed of size 1.5 Sqmm 1100 Volt , draw through LT steel tubular poles for connection to street light from junction box as directed by Supply and connecting three core cord flexible wire, copper conductor multistranded, PVC insulated and overall PVC sheathed of size 1.5 Sqmm 1100 Volt , draw through LT steel tubular poles for connection to street light from junction box as directed by Supply and connecting three core cord flexible wire, copper conductor multistranded, PVC insulated and overall PVC sheathed of size 1.5 Sqmm 1100 Volt , draw through LT steel tubular poles for connection to street light from junction box as directed by 0 Supply and connecting three core cord flexible wire, copper conductor multistranded, PVC insulated and overall PVC sheathed of size 1.5 Sqmm 1100 Volt , draw through LT steel tubular poles for connection to street light from junction box as directed by 0

16 0 Cable route indicator, duly engraved with 'LT CABLE 1100 VOLT' on cast iron round plate 150 mm dia with provision of 500 mm long (minimum) single leg/stand of flat iron 40 x 5 mm, welded/riveted on back side of plate, fixed and grouted in position with PC Cable route indicator, duly engraved with 'LT CABLE 1100 VOLT' on cast iron round plate 150 mm dia with provision of 500 mm long (minimum) single leg/stand of flat iron 40 x 5 mm, welded/riveted on back side of plate, fixed and grouted in position with PC Cable route indicator, duly engraved with 'LT CABLE 1100 VOLT' on cast iron round plate 150 mm dia with provision of 500 mm long (minimum) single leg/stand of flat iron 40 x 5 mm, welded/riveted on back side of plate, fixed and grouted in position with PC 1 Cable route indicator, duly engraved with 'LT CABLE 1100 VOLT' on cast iron round plate 150 mm dia with provision of 500 mm long (minimum) single leg/stand of flat iron 40 x 5 mm, welded/riveted on back side of plate, fixed and grouted in position with PC Cable route indicator, duly engraved with 'LT CABLE 1100 VOLT' on cast iron round plate 150 mm dia with provision of 500 mm long (minimum) single leg/stand of flat iron 40 x 5 mm, welded/riveted on back side of plate, fixed and grouted in position with PC Cable route indicator, duly engraved with 'LT CABLE 1100 VOLT' on cast iron round plate 150 mm dia with provision of 500 mm long (minimum) single leg/stand of flat iron 40 x 5 mm, welded/riveted on back side of plate, fixed and grouted in position with PC Cable route indicator, duly engraved with 'LT CABLE 1100 VOLT' on cast iron round plate 150 mm dia with provision of 500 mm long (minimum) single leg/stand of flat iron 40 x 5 mm, welded/riveted on back side of plate, fixed and grouted in position with PC Cable route indicator, duly engraved with 'LT CABLE 1100 VOLT' on cast iron round plate 150 mm dia with provision of 500 mm long (minimum) single leg/stand of flat iron 40 x 5 mm, welded/riveted on back side of plate, fixed and grouted in position with PC Cable route indicator, duly engraved with 'LT CABLE 1100 VOLT' on cast iron round plate 150 mm dia with provision of 500 mm long (minimum) single leg/stand of flat iron 40 x 5 mm, welded/riveted on back side of plate, fixed and grouted in position with PC Cable route indicator, duly engraved with 'LT CABLE 1100 VOLT' on cast iron round plate 150 mm dia with provision of 500 mm long (minimum) single leg/stand of flat iron 40 x 5 mm, welded/riveted on back side of plate, fixed and grouted in position with PC Cable route indicator, duly engraved with 'LT CABLE 1100 VOLT' on cast iron round plate 150 mm dia with provision of 500 mm long (minimum) single leg/stand of flat iron 40 x 5 mm, welded/riveted on back side of plate, fixed and grouted in position with PC Cable route indicator, duly engraved with 'LT CABLE 1100 VOLT' on cast iron round plate 150 mm dia with provision of 500 mm long (minimum) single leg/stand of flat iron 40 x 5 mm, welded/riveted on back side of plate, fixed and grouted in position with PC Cable route indicator, duly engraved with 'LT CABLE 1100 VOLT' on cast iron round plate 150 mm dia with provision of 500 mm long (minimum) single leg/stand of flat iron 40 x 5 mm, welded/riveted on back side of plate, fixed and grouted in position with PC Cable route indicator, duly engraved with 'LT CABLE 1100 VOLT' on cast iron round plate 150 mm dia with provision of 500 mm long (minimum) single leg/stand of flat iron 40 x 5 mm, welded/riveted on back side of plate, fixed and grouted in position with PC Cable route indicator, duly engraved with 'LT CABLE 1100 VOLT' on cast iron round plate 150 mm dia with provision of 500 mm long (minimum) single leg/stand of flat iron 40 x 5 mm, welded/riveted on back side of plate, fixed and grouted in position with PC Cable route indicator, duly engraved with 'LT CABLE 1100 VOLT' on cast iron round plate 150 mm dia with provision of 500 mm long (minimum) single leg/stand of flat iron 40 x 5 mm, welded/riveted on back side of plate, fixed and grouted in position with PC Cable route indicator, duly engraved with 'LT CABLE 1100 VOLT' on cast iron round plate 150 mm dia with provision of 500 mm long (minimum) single leg/stand of flat iron 40 x 5 mm, welded/riveted on back side of plate, fixed and grouted in position with PC Cable route indicator, duly engraved with 'LT CABLE 1100 VOLT' on cast iron round plate 150 mm dia with provision of 500 mm long (minimum) single leg/stand of flat iron 40 x 5 mm, welded/riveted on back side of plate, fixed and grouted in position with PC Cable route indicator, duly engraved with 'LT CABLE 1100 VOLT' on cast iron round plate 150 mm dia with provision of 500 mm long (minimum) single leg/stand of flat iron 40 x 5 mm, welded/riveted on back side of plate, fixed and grouted in position with PC Cable route indicator, duly engraved with 'LT CABLE 1100 VOLT' on cast iron round plate 150 mm dia with provision of 500 mm long (minimum) single leg/stand of flat iron 40 x 5 mm, welded/riveted on back side of plate, fixed and grouted in position with PC Cable route indicator, duly engraved with 'LT CABLE 1100 VOLT' on cast iron round plate 150 mm dia with provision of 500 mm long (minimum) single leg/stand of flat iron 40 x 5 mm, welded/riveted on back side of plate, fixed and grouted in position with PC Cable route indicator, duly engraved with 'LT CABLE 1100 VOLT' on cast iron round plate 150 mm dia with provision of 500 mm long (minimum) single leg/stand of flat iron 40 x 5 mm, welded/riveted on back side of plate, fixed and grouted in position with PC Cable route indicator, duly engraved with 'LT CABLE 1100 VOLT' on cast iron round plate 150 mm dia with provision of 500 mm long (minimum) single leg/stand of flat iron 40 x 5 mm, welded/riveted on back side of plate, fixed and grouted in position with PC Cable route indicator, duly engraved with 'LT CABLE 1100 VOLT' on cast iron round plate 150 mm dia with provision of 500 mm long (minimum) single leg/stand of flat iron 40 x 5 mm, welded/riveted on back side of plate, fixed and grouted in position with PC Cable route indicator, duly engraved with 'LT CABLE 1100 VOLT' on cast iron round plate 150 mm dia with provision of 500 mm long (minimum) single leg/stand of flat iron 40 x 5 mm, welded/riveted on back side of plate, fixed and grouted in position with PC Cable route indicator, duly engraved with 'LT CABLE 1100 VOLT' on cast iron round plate 150 mm dia with provision of 500 mm long (minimum) single leg/stand of flat iron 40 x 5 mm, welded/riveted on back side of plate, fixed and grouted in position with PC Cable route indicator, duly engraved with 'LT CABLE 1100 VOLT' on cast iron round plate 150 mm dia with provision of 500 mm long (minimum) single leg/stand of flat iron 40 x 5 mm, welded/riveted on back side of plate, fixed and grouted in position with PC Cable route indicator, duly engraved with 'LT CABLE 1100 VOLT' on cast iron round plate 150 mm dia with provision of 500 mm long (minimum) single leg/stand of flat iron 40 x 5 mm, welded/riveted on back side of plate, fixed and grouted in position with PC Cable route indicator, duly engraved with 'LT CABLE 1100 VOLT' on cast iron round plate 150 mm dia with provision of 500 mm long (minimum) single leg/stand of flat iron 40 x 5 mm, welded/riveted on back side of plate, fixed and grouted in position with PC Cable route indicator, duly engraved with 'LT CABLE 1100 VOLT' on cast iron round plate 150 mm dia with provision of 500 mm long (minimum) single leg/stand of flat iron 40 x 5 mm, welded/riveted on back side of plate, fixed and grouted in position with PC Cable route indicator, duly engraved with 'LT CABLE 1100 VOLT' on cast iron round plate 150 mm dia with provision of 500 mm long (minimum) single leg/stand of flat iron 40 x 5 mm, welded/riveted on back side of plate, fixed and grouted in position with PC Cable route indicator, duly engraved with 'LT CABLE 1100 VOLT' on cast iron round plate 150 mm dia with provision of 500 mm long (minimum) single leg/stand of flat iron 40 x 5 mm, welded/riveted on back side of plate, fixed and grouted in position with PC Cable route indicator, duly engraved with 'LT CABLE 1100 VOLT' on cast iron round plate 150 mm dia with provision of 500 mm long (minimum) single leg/stand of flat iron 40 x 5 mm, welded/riveted on back side of plate, fixed and grouted in position with PC Cable route indicator, duly engraved with 'LT CABLE 1100 VOLT' on cast iron round plate 150 mm dia with provision of 500 mm long (minimum) single leg/stand of flat iron 40 x 5 mm, welded/riveted on back side of plate, fixed and grouted in position with PC Cable route indicator, duly engraved with 'LT CABLE 1100 VOLT' on cast iron round plate 150 mm dia with provision of 500 mm long (minimum) single leg/stand of flat iron 40 x 5 mm, welded/riveted on back side of plate, fixed and grouted in position with PC Cable route indicator, duly engraved with 'LT CABLE 1100 VOLT' on cast iron round plate 150 mm dia with provision of 500 mm long (minimum) single leg/stand of flat iron 40 x 5 mm, welded/riveted on back side of plate, fixed and grouted in position with PC Cable route indicator, duly engraved with 'LT CABLE 1100 VOLT' on cast iron round plate 150 mm dia with provision of 500 mm long (minimum) single leg/stand of flat iron 40 x 5 mm, welded/riveted on back side of plate, fixed and grouted in position with PC Cable route indicator, duly engraved with 'LT CABLE 1100 VOLT' on cast iron round plate 150 mm dia with provision of 500 mm long (minimum) single leg/stand of flat iron 40 x 5 mm, welded/riveted on back side of plate, fixed and grouted in position with PC Cable route indicator, duly engraved with 'LT CABLE 1100 VOLT' on cast iron round plate 150 mm dia with provision of 500 mm long (minimum) single leg/stand of flat iron 40 x 5 mm, welded/riveted on back side of plate, fixed and grouted in position with PC Cable route indicator, duly engraved with 'LT CABLE 1100 VOLT' on cast iron round plate 150 mm dia with provision of 500 mm long (minimum) single leg/stand of flat iron 40 x 5 mm, welded/riveted on back side of plate, fixed and grouted in position with PC Cable route indicator, duly engraved with 'LT CABLE 1100 VOLT' on cast iron round plate 150 mm dia with provision of 500 mm long (minimum) single leg/stand of flat iron 40 x 5 mm, welded/riveted on back side of plate, fixed and grouted in position with PC Cable route indicator, duly engraved with 'LT CABLE 1100 VOLT' on cast iron round plate 150 mm dia with provision of 500 mm long (minimum) single leg/stand of flat iron 40 x 5 mm, welded/riveted on back side of plate, fixed and grouted in position with PC Cable route indicator, duly engraved with 'LT CABLE 1100 VOLT' on cast iron round plate 150 mm dia with provision of 500 mm long (minimum) single leg/stand of flat iron 40 x 5 mm, welded/riveted on back side of plate, fixed and grouted in position with PC Cable route indicator, duly engraved with 'LT CABLE 1100 VOLT' on cast iron round plate 150 mm dia with provision of 500 mm long (minimum) single leg/stand of flat iron 40 x 5 mm, welded/riveted on back side of plate, fixed and grouted in position with PC 0 Cable route indicator, duly engraved with 'LT CABLE 1100 VOLT' on cast iron round plate 150 mm dia with provision of 500 mm long (minimum) single leg/stand of flat iron 40 x 5 mm, welded/riveted on back side of plate, fixed and grouted in position with PC 0

320 0 Providing cement concrete type B1 (1;2;4) (20 mm graded aggregate)in precast posts for cable route indicator of size 500x300x100 mm rounded top as directed and grouting in ground with PCC (1;3;6) block of size 350mmx150mmx200mm including 10 mm thick plas Providing cement concrete type B1 (1;2;4) (20 mm graded aggregate)in precast posts for cable route indicator of size 500x300x100 mm rounded top as directed and grouting in ground with PCC (1;3;6) block of size 350mmx150mmx200mm including 10 mm thick plas Providing cement concrete type B1 (1;2;4) (20 mm graded aggregate)in precast posts for cable route indicator of size 500x300x100 mm rounded top as directed and grouting in ground with PCC (1;3;6) block of size 350mmx150mmx200mm including 10 mm thick plas 1 Providing cement concrete type B1 (1;2;4) (20 mm graded aggregate)in precast posts for cable route indicator of size 500x300x100 mm rounded top as directed and grouting in ground with PCC (1;3;6) block of size 350mmx150mmx200mm including 10 mm thick plas Providing cement concrete type B1 (1;2;4) (20 mm graded aggregate)in precast posts for cable route indicator of size 500x300x100 mm rounded top as directed and grouting in ground with PCC (1;3;6) block of size 350mmx150mmx200mm including 10 mm thick plas Providing cement concrete type B1 (1;2;4) (20 mm graded aggregate)in precast posts for cable route indicator of size 500x300x100 mm rounded top as directed and grouting in ground with PCC (1;3;6) block of size 350mmx150mmx200mm including 10 mm thick plas Providing cement concrete type B1 (1;2;4) (20 mm graded aggregate)in precast posts for cable route indicator of size 500x300x100 mm rounded top as directed and grouting in ground with PCC (1;3;6) block of size 350mmx150mmx200mm including 10 mm thick plas Providing cement concrete type B1 (1;2;4) (20 mm graded aggregate)in precast posts for cable route indicator of size 500x300x100 mm rounded top as directed and grouting in ground with PCC (1;3;6) block of size 350mmx150mmx200mm including 10 mm thick plas Providing cement concrete type B1 (1;2;4) (20 mm graded aggregate)in precast posts for cable route indicator of size 500x300x100 mm rounded top as directed and grouting in ground with PCC (1;3;6) block of size 350mmx150mmx200mm including 10 mm thick plas Providing cement concrete type B1 (1;2;4) (20 mm graded aggregate)in precast posts for cable route indicator of size 500x300x100 mm rounded top as directed and grouting in ground with PCC (1;3;6) block of size 350mmx150mmx200mm including 10 mm thick plas Providing cement concrete type B1 (1;2;4) (20 mm graded aggregate)in precast posts for cable route indicator of size 500x300x100 mm rounded top as directed and grouting in ground with PCC (1;3;6) block of size 350mmx150mmx200mm including 10 mm thick plas Providing cement concrete type B1 (1;2;4) (20 mm graded aggregate)in precast posts for cable route indicator of size 500x300x100 mm rounded top as directed and grouting in ground with PCC (1;3;6) block of size 350mmx150mmx200mm including 10 mm thick plas Providing cement concrete type B1 (1;2;4) (20 mm graded aggregate)in precast posts for cable route indicator of size 500x300x100 mm rounded top as directed and grouting in ground with PCC (1;3;6) block of size 350mmx150mmx200mm including 10 mm thick plas Providing cement concrete type B1 (1;2;4) (20 mm graded aggregate)in precast posts for cable route indicator of size 500x300x100 mm rounded top as directed and grouting in ground with PCC (1;3;6) block of size 350mmx150mmx200mm including 10 mm thick plas Providing cement concrete type B1 (1;2;4) (20 mm graded aggregate)in precast posts for cable route indicator of size 500x300x100 mm rounded top as directed and grouting in ground with PCC (1;3;6) block of size 350mmx150mmx200mm including 10 mm thick plas Providing cement concrete type B1 (1;2;4) (20 mm graded aggregate)in precast posts for cable route indicator of size 500x300x100 mm rounded top as directed and grouting in ground with PCC (1;3;6) block of size 350mmx150mmx200mm including 10 mm thick plas Providing cement concrete type B1 (1;2;4) (20 mm graded aggregate)in precast posts for cable route indicator of size 500x300x100 mm rounded top as directed and grouting in ground with PCC (1;3;6) block of size 350mmx150mmx200mm including 10 mm thick plas Providing cement concrete type B1 (1;2;4) (20 mm graded aggregate)in precast posts for cable route indicator of size 500x300x100 mm rounded top as directed and grouting in ground with PCC (1;3;6) block of size 350mmx150mmx200mm including 10 mm thick plas Providing cement concrete type B1 (1;2;4) (20 mm graded aggregate)in precast posts for cable route indicator of size 500x300x100 mm rounded top as directed and grouting in ground with PCC (1;3;6) block of size 350mmx150mmx200mm including 10 mm thick plas Providing cement concrete type B1 (1;2;4) (20 mm graded aggregate)in precast posts for cable route indicator of size 500x300x100 mm rounded top as directed and grouting in ground with PCC (1;3;6) block of size 350mmx150mmx200mm including 10 mm thick plas Providing cement concrete type B1 (1;2;4) (20 mm graded aggregate)in precast posts for cable route indicator of size 500x300x100 mm rounded top as directed and grouting in ground with PCC (1;3;6) block of size 350mmx150mmx200mm including 10 mm thick plas Providing cement concrete type B1 (1;2;4) (20 mm graded aggregate)in precast posts for cable route indicator of size 500x300x100 mm rounded top as directed and grouting in ground with PCC (1;3;6) block of size 350mmx150mmx200mm including 10 mm thick plas Providing cement concrete type B1 (1;2;4) (20 mm graded aggregate)in precast posts for cable route indicator of size 500x300x100 mm rounded top as directed and grouting in ground with PCC (1;3;6) block of size 350mmx150mmx200mm including 10 mm thick plas Providing cement concrete type B1 (1;2;4) (20 mm graded aggregate)in precast posts for cable route indicator of size 500x300x100 mm rounded top as directed and grouting in ground with PCC (1;3;6) block of size 350mmx150mmx200mm including 10 mm thick plas Providing cement concrete type B1 (1;2;4) (20 mm graded aggregate)in precast posts for cable route indicator of size 500x300x100 mm rounded top as directed and grouting in ground with PCC (1;3;6) block of size 350mmx150mmx200mm including 10 mm thick plas Providing cement concrete type B1 (1;2;4) (20 mm graded aggregate)in precast posts for cable route indicator of size 500x300x100 mm rounded top as directed and grouting in ground with PCC (1;3;6) block of size 350mmx150mmx200mm including 10 mm thick plas Providing cement concrete type B1 (1;2;4) (20 mm graded aggregate)in precast posts for cable route indicator of size 500x300x100 mm rounded top as directed and grouting in ground with PCC (1;3;6) block of size 350mmx150mmx200mm including 10 mm thick plas Providing cement concrete type B1 (1;2;4) (20 mm graded aggregate)in precast posts for cable route indicator of size 500x300x100 mm rounded top as directed and grouting in ground with PCC (1;3;6) block of size 350mmx150mmx200mm including 10 mm thick plas Providing cement concrete type B1 (1;2;4) (20 mm graded aggregate)in precast posts for cable route indicator of size 500x300x100 mm rounded top as directed and grouting in ground with PCC (1;3;6) block of size 350mmx150mmx200mm including 10 mm thick plas Providing cement concrete type B1 (1;2;4) (20 mm graded aggregate)in precast posts for cable route indicator of size 500x300x100 mm rounded top as directed and grouting in ground with PCC (1;3;6) block of size 350mmx150mmx200mm including 10 mm thick plas Providing cement concrete type B1 (1;2;4) (20 mm graded aggregate)in precast posts for cable route indicator of size 500x300x100 mm rounded top as directed and grouting in ground with PCC (1;3;6) block of size 350mmx150mmx200mm including 10 mm thick plas Providing cement concrete type B1 (1;2;4) (20 mm graded aggregate)in precast posts for cable route indicator of size 500x300x100 mm rounded top as directed and grouting in ground with PCC (1;3;6) block of size 350mmx150mmx200mm including 10 mm thick plas Providing cement concrete type B1 (1;2;4) (20 mm graded aggregate)in precast posts for cable route indicator of size 500x300x100 mm rounded top as directed and grouting in ground with PCC (1;3;6) block of size 350mmx150mmx200mm including 10 mm thick plas Providing cement concrete type B1 (1;2;4) (20 mm graded aggregate)in precast posts for cable route indicator of size 500x300x100 mm rounded top as directed and grouting in ground with PCC (1;3;6) block of size 350mmx150mmx200mm including 10 mm thick plas Providing cement concrete type B1 (1;2;4) (20 mm graded aggregate)in precast posts for cable route indicator of size 500x300x100 mm rounded top as directed and grouting in ground with PCC (1;3;6) block of size 350mmx150mmx200mm including 10 mm thick plas Providing cement concrete type B1 (1;2;4) (20 mm graded aggregate)in precast posts for cable route indicator of size 500x300x100 mm rounded top as directed and grouting in ground with PCC (1;3;6) block of size 350mmx150mmx200mm including 10 mm thick plas Providing cement concrete type B1 (1;2;4) (20 mm graded aggregate)in precast posts for cable route indicator of size 500x300x100 mm rounded top as directed and grouting in ground with PCC (1;3;6) block of size 350mmx150mmx200mm including 10 mm thick plas Providing cement concrete type B1 (1;2;4) (20 mm graded aggregate)in precast posts for cable route indicator of size 500x300x100 mm rounded top as directed and grouting in ground with PCC (1;3;6) block of size 350mmx150mmx200mm including 10 mm thick plas Providing cement concrete type B1 (1;2;4) (20 mm graded aggregate)in precast posts for cable route indicator of size 500x300x100 mm rounded top as directed and grouting in ground with PCC (1;3;6) block of size 350mmx150mmx200mm including 10 mm thick plas Providing cement concrete type B1 (1;2;4) (20 mm graded aggregate)in precast posts for cable route indicator of size 500x300x100 mm rounded top as directed and grouting in ground with PCC (1;3;6) block of size 350mmx150mmx200mm including 10 mm thick plas Providing cement concrete type B1 (1;2;4) (20 mm graded aggregate)in precast posts for cable route indicator of size 500x300x100 mm rounded top as directed and grouting in ground with PCC (1;3;6) block of size 350mmx150mmx200mm including 10 mm thick plas Providing cement concrete type B1 (1;2;4) (20 mm graded aggregate)in precast posts for cable route indicator of size 500x300x100 mm rounded top as directed and grouting in ground with PCC (1;3;6) block of size 350mmx150mmx200mm including 10 mm thick plas Providing cement concrete type B1 (1;2;4) (20 mm graded aggregate)in precast posts for cable route indicator of size 500x300x100 mm rounded top as directed and grouting in ground with PCC (1;3;6) block of size 350mmx150mmx200mm including 10 mm thick plas Providing cement concrete type B1 (1;2;4) (20 mm graded aggregate)in precast posts for cable route indicator of size 500x300x100 mm rounded top as directed and grouting in ground with PCC (1;3;6) block of size 350mmx150mmx200mm including 10 mm thick plas 0 Providing cement concrete type B1 (1;2;4) (20 mm graded aggregate)in precast posts for cable route indicator of size 500x300x100 mm rounded top as directed and grouting in ground with PCC (1;3;6) block of size 350mmx150mmx200mm including 10 mm thick plas 0

1 0 M&L for Factory made unreinforced precast concrete cable covers conforming to IS:5820, class HV type 1 size 300x180x40 mm for cable protection complete all as specified 23.16 M&L for Factory made unreinforced precast concrete cable covers conforming to IS:5820, class HV type 1 size 300x180x40 mm for cable protection complete all as specified 23.16 M&L for Factory made unreinforced precast concrete cable covers conforming to IS:5820, class HV type 1 size 300x180x40 mm for cable protection complete all as specified 23.16 1 M&L for Factory made unreinforced precast concrete cable covers conforming to IS:5820, class HV type 1 size 300x180x40 mm for cable protection complete all as specified 23.16 M&L for Factory made unreinforced precast concrete cable covers conforming to IS:5820, class HV type 1 size 300x180x40 mm for cable protection complete all as specified 23.16 M&L for Factory made unreinforced precast concrete cable covers conforming to IS:5820, class HV type 1 size 300x180x40 mm for cable protection complete all as specified 23.16 M&L for Factory made unreinforced precast concrete cable covers conforming to IS:5820, class HV type 1 size 300x180x40 mm for cable protection complete all as specified 23.16 M&L for Factory made unreinforced precast concrete cable covers conforming to IS:5820, class HV type 1 size 300x180x40 mm for cable protection complete all as specified 23.16 M&L for Factory made unreinforced precast concrete cable covers conforming to IS:5820, class HV type 1 size 300x180x40 mm for cable protection complete all as specified 23.16 M&L for Factory made unreinforced precast concrete cable covers conforming to IS:5820, class HV type 1 size 300x180x40 mm for cable protection complete all as specified 23.16 M&L for Factory made unreinforced precast concrete cable covers conforming to IS:5820, class HV type 1 size 300x180x40 mm for cable protection complete all as specified 23.16 M&L for Factory made unreinforced precast concrete cable covers conforming to IS:5820, class HV type 1 size 300x180x40 mm for cable protection complete all as specified 23.16 M&L for Factory made unreinforced precast concrete cable covers conforming to IS:5820, class HV type 1 size 300x180x40 mm for cable protection complete all as specified 23.16 M&L for Factory made unreinforced precast concrete cable covers conforming to IS:5820, class HV type 1 size 300x180x40 mm for cable protection complete all as specified 23.16 M&L for Factory made unreinforced precast concrete cable covers conforming to IS:5820, class HV type 1 size 300x180x40 mm for cable protection complete all as specified 23.16 M&L for Factory made unreinforced precast concrete cable covers conforming to IS:5820, class HV type 1 size 300x180x40 mm for cable protection complete all as specified 23.16 M&L for Factory made unreinforced precast concrete cable covers conforming to IS:5820, class HV type 1 size 300x180x40 mm for cable protection complete all as specified 23.16 M&L for Factory made unreinforced precast concrete cable covers conforming to IS:5820, class HV type 1 size 300x180x40 mm for cable protection complete all as specified 23.16 M&L for Factory made unreinforced precast concrete cable covers conforming to IS:5820, class HV type 1 size 300x180x40 mm for cable protection complete all as specified 23.16 M&L for Factory made unreinforced precast concrete cable covers conforming to IS:5820, class HV type 1 size 300x180x40 mm for cable protection complete all as specified 23.16 M&L for Factory made unreinforced precast concrete cable covers conforming to IS:5820, class HV type 1 size 300x180x40 mm for cable protection complete all as specified 23.16 M&L for Factory made unreinforced precast concrete cable covers conforming to IS:5820, class HV type 1 size 300x180x40 mm for cable protection complete all as specified 23.16 M&L for Factory made unreinforced precast concrete cable covers conforming to IS:5820, class HV type 1 size 300x180x40 mm for cable protection complete all as specified 23.16 M&L for Factory made unreinforced precast concrete cable covers conforming to IS:5820, class HV type 1 size 300x180x40 mm for cable protection complete all as specified 23.16 M&L for Factory made unreinforced precast concrete cable covers conforming to IS:5820, class HV type 1 size 300x180x40 mm for cable protection complete all as specified 23.16 M&L for Factory made unreinforced precast concrete cable covers conforming to IS:5820, class HV type 1 size 300x180x40 mm for cable protection complete all as specified 23.16 M&L for Factory made unreinforced precast concrete cable covers conforming to IS:5820, class HV type 1 size 300x180x40 mm for cable protection complete all as specified 23.16 M&L for Factory made unreinforced precast concrete cable covers conforming to IS:5820, class HV type 1 size 300x180x40 mm for cable protection complete all as specified 23.16 M&L for Factory made unreinforced precast concrete cable covers conforming to IS:5820, class HV type 1 size 300x180x40 mm for cable protection complete all as specified 23.16 M&L for Factory made unreinforced precast concrete cable covers conforming to IS:5820, class HV type 1 size 300x180x40 mm for cable protection complete all as specified 23.16 M&L for Factory made unreinforced precast concrete cable covers conforming to IS:5820, class HV type 1 size 300x180x40 mm for cable protection complete all as specified 23.16 M&L for Factory made unreinforced precast concrete cable covers conforming to IS:5820, class HV type 1 size 300x180x40 mm for cable protection complete all as specified 23.16 M&L for Factory made unreinforced precast concrete cable covers conforming to IS:5820, class HV type 1 size 300x180x40 mm for cable protection complete all as specified 23.16 M&L for Factory made unreinforced precast concrete cable covers conforming to IS:5820, class HV type 1 size 300x180x40 mm for cable protection complete all as specified 23.16 M&L for Factory made unreinforced precast concrete cable covers conforming to IS:5820, class HV type 1 size 300x180x40 mm for cable protection complete all as specified 23.16 M&L for Factory made unreinforced precast concrete cable covers conforming to IS:5820, class HV type 1 size 300x180x40 mm for cable protection complete all as specified 23.16 M&L for Factory made unreinforced precast concrete cable covers conforming to IS:5820, class HV type 1 size 300x180x40 mm for cable protection complete all as specified 23.16 M&L for Factory made unreinforced precast concrete cable covers conforming to IS:5820, class HV type 1 size 300x180x40 mm for cable protection complete all as specified 23.16 M&L for Factory made unreinforced precast concrete cable covers conforming to IS:5820, class HV type 1 size 300x180x40 mm for cable protection complete all as specified 23.16 M&L for Factory made unreinforced precast concrete cable covers conforming to IS:5820, class HV type 1 size 300x180x40 mm for cable protection complete all as specified 23.16 M&L for Factory made unreinforced precast concrete cable covers conforming to IS:5820, class HV type 1 size 300x180x40 mm for cable protection complete all as specified 23.16 M&L for Factory made unreinforced precast concrete cable covers conforming to IS:5820, class HV type 1 size 300x180x40 mm for cable protection complete all as specified 23.16 M&L for Factory made unreinforced precast concrete cable covers conforming to IS:5820, class HV type 1 size 300x180x40 mm for cable protection complete all as specified 23.16 M&L for Factory made unreinforced precast concrete cable covers conforming to IS:5820, class HV type 1 size 300x180x40 mm for cable protection complete all as specified 23.16 0 M&L for Factory made unreinforced precast concrete cable covers conforming to IS:5820, class HV type 1 size 300x180x40 mm for cable protection complete all as specified 23.16 0

Factory made unreinforced precast concrete cable covers conforming to IS:5820, class LV type 1 size 250x150x40 mm for cable protection complete all as specified. 23.17 Factory made unreinforced precast concrete cable covers conforming to IS:5820, class LV type 1 size 250x150x40 mm for cable protection complete all as specified. 23.17 Factory made unreinforced precast concrete cable covers conforming to IS:5820, class LV type 1 size 250x150x40 mm for cable protection complete all as specified. 23.17 Factory made unreinforced precast concrete cable covers conforming to IS:5820, class LV type 1 size 250x150x40 mm for cable protection complete all as specified. 23.17 Factory made unreinforced precast concrete cable covers conforming to IS:5820, class LV type 1 size 250x150x40 mm for cable protection complete all as specified. 23.17 Factory made unreinforced precast concrete cable covers conforming to IS:5820, class LV type 1 size 250x150x40 mm for cable protection complete all as specified. 23.17 Factory made unreinforced precast concrete cable covers conforming to IS:5820, class LV type 1 size 250x150x40 mm for cable protection complete all as specified. 23.17 Factory made unreinforced precast concrete cable covers conforming to IS:5820, class LV type 1 size 250x150x40 mm for cable protection complete all as specified. 23.17 Factory made unreinforced precast concrete cable covers conforming to IS:5820, class LV type 1 size 250x150x40 mm for cable protection complete all as specified. 23.17 Factory made unreinforced precast concrete cable covers conforming to IS:5820, class LV type 1 size 250x150x40 mm for cable protection complete all as specified. 23.17 Factory made unreinforced precast concrete cable covers conforming to IS:5820, class LV type 1 size 250x150x40 mm for cable protection complete all as specified. 23.17 Factory made unreinforced precast concrete cable covers conforming to IS:5820, class LV type 1 size 250x150x40 mm for cable protection complete all as specified. 23.17 Factory made unreinforced precast concrete cable covers conforming to IS:5820, class LV type 1 size 250x150x40 mm for cable protection complete all as specified. 23.17 Factory made unreinforced precast concrete cable covers conforming to IS:5820, class LV type 1 size 250x150x40 mm for cable protection complete all as specified. 23.17 Factory made unreinforced precast concrete cable covers conforming to IS:5820, class LV type 1 size 250x150x40 mm for cable protection complete all as specified. 23.17 Factory made unreinforced precast concrete cable covers conforming to IS:5820, class LV type 1 size 250x150x40 mm for cable protection complete all as specified. 23.17 Factory made unreinforced precast concrete cable covers conforming to IS:5820, class LV type 1 size 250x150x40 mm for cable protection complete all as specified. 23.17 Factory made unreinforced precast concrete cable covers conforming to IS:5820, class LV type 1 size 250x150x40 mm for cable protection complete all as specified. 23.17 Factory made unreinforced precast concrete cable covers conforming to IS:5820, class LV type 1 size 250x150x40 mm for cable protection complete all as specified. 23.17 Factory made unreinforced precast concrete cable covers conforming to IS:5820, class LV type 1 size 250x150x40 mm for cable protection complete all as specified. 23.17 Factory made unreinforced precast concrete cable covers conforming to IS:5820, class LV type 1 size 250x150x40 mm for cable protection complete all as specified. 23.17 Factory made unreinforced precast concrete cable covers conforming to IS:5820, class LV type 1 size 250x150x40 mm for cable protection complete all as specified. 23.17 Factory made unreinforced precast concrete cable covers conforming to IS:5820, class LV type 1 size 250x150x40 mm for cable protection complete all as specified. 23.17 Factory made unreinforced precast concrete cable covers conforming to IS:5820, class LV type 1 size 250x150x40 mm for cable protection complete all as specified. 23.17 Factory made unreinforced precast concrete cable covers conforming to IS:5820, class LV type 1 size 250x150x40 mm for cable protection complete all as specified. 23.17 Factory made unreinforced precast concrete cable covers conforming to IS:5820, class LV type 1 size 250x150x40 mm for cable protection complete all as specified. 23.17 Factory made unreinforced precast concrete cable covers conforming to IS:5820, class LV type 1 size 250x150x40 mm for cable protection complete all as specified. 23.17 Factory made unreinforced precast concrete cable covers conforming to IS:5820, class LV type 1 size 250x150x40 mm for cable protection complete all as specified. 23.17 Factory made unreinforced precast concrete cable covers conforming to IS:5820, class LV type 1 size 250x150x40 mm for cable protection complete all as specified. 23.17 Factory made unreinforced precast concrete cable covers conforming to IS:5820, class LV type 1 size 250x150x40 mm for cable protection complete all as specified. 23.17 Factory made unreinforced precast concrete cable covers conforming to IS:5820, class LV type 1 size 250x150x40 mm for cable protection complete all as specified. 23.17 Factory made unreinforced precast concrete cable covers conforming to IS:5820, class LV type 1 size 250x150x40 mm for cable protection complete all as specified. 23.17 Factory made unreinforced precast concrete cable covers conforming to IS:5820, class LV type 1 size 250x150x40 mm for cable protection complete all as specified. 23.17 Factory made unreinforced precast concrete cable covers conforming to IS:5820, class LV type 1 size 250x150x40 mm for cable protection complete all as specified. 23.17 Factory made unreinforced precast concrete cable covers conforming to IS:5820, class LV type 1 size 250x150x40 mm for cable protection complete all as specified. 23.17 Factory made unreinforced precast concrete cable covers conforming to IS:5820, class LV type 1 size 250x150x40 mm for cable protection complete all as specified. 23.17 Factory made unreinforced precast concrete cable covers conforming to IS:5820, class LV type 1 size 250x150x40 mm for cable protection complete all as specified. 23.17 Factory made unreinforced precast concrete cable covers conforming to IS:5820, class LV type 1 size 250x150x40 mm for cable protection complete all as specified. 23.17 Factory made unreinforced precast concrete cable covers conforming to IS:5820, class LV type 1 size 250x150x40 mm for cable protection complete all as specified. 23.17 Factory made unreinforced precast concrete cable covers conforming to IS:5820, class LV type 1 size 250x150x40 mm for cable protection complete all as specified. 23.17 Factory made unreinforced precast concrete cable covers conforming to IS:5820, class LV type 1 size 250x150x40 mm for cable protection complete all as specified. 23.17 Factory made unreinforced precast concrete cable covers conforming to IS:5820, class LV type 1 size 250x150x40 mm for cable protection complete all as specified. 23.17 Factory made unreinforced precast concrete cable covers conforming to IS:5820, class LV type 1 size 250x150x40 mm for cable protection complete all as specified. 23.17 Factory made unreinforced precast concrete cable covers conforming to IS:5820, class LV type 1 size 250x150x40 mm for cable protection complete all as specified. 23.17 Factory made unreinforced precast concrete cable covers conforming to IS:5820, class LV type 1 size 250x150x40 mm for cable protection complete all as specified. 23.17

2 0 Supply and fix fully cast aluminium body finished with polyurethane paint (with prior treatment) bollard of length 736 mm & circular base diameter of 177 mm and max diameter of leg of bollard 127 mm surmounted with fully cast aluminium body finished with Supply and fix fully cast aluminium body finished with polyurethane paint (with prior treatment) bollard of length 736 mm & circular base diameter of 177 mm and max diameter of leg of bollard 127 mm surmounted with fully cast aluminium body finished with Supply and fix fully cast aluminium body finished with polyurethane paint (with prior treatment) bollard of length 736 mm & circular base diameter of 177 mm and max diameter of leg of bollard 127 mm surmounted with fully cast aluminium body finished with 1 Supply and fix fully cast aluminium body finished with polyurethane paint (with prior treatment) bollard of length 736 mm & circular base diameter of 177 mm and max diameter of leg of bollard 127 mm surmounted with fully cast aluminium body finished with Supply and fix fully cast aluminium body finished with polyurethane paint (with prior treatment) bollard of length 736 mm & circular base diameter of 177 mm and max diameter of leg of bollard 127 mm surmounted with fully cast aluminium body finished with Supply and fix fully cast aluminium body finished with polyurethane paint (with prior treatment) bollard of length 736 mm & circular base diameter of 177 mm and max diameter of leg of bollard 127 mm surmounted with fully cast aluminium body finished with Supply and fix fully cast aluminium body finished with polyurethane paint (with prior treatment) bollard of length 736 mm & circular base diameter of 177 mm and max diameter of leg of bollard 127 mm surmounted with fully cast aluminium body finished with Supply and fix fully cast aluminium body finished with polyurethane paint (with prior treatment) bollard of length 736 mm & circular base diameter of 177 mm and max diameter of leg of bollard 127 mm surmounted with fully cast aluminium body finished with Supply and fix fully cast aluminium body finished with polyurethane paint (with prior treatment) bollard of length 736 mm & circular base diameter of 177 mm and max diameter of leg of bollard 127 mm surmounted with fully cast aluminium body finished with Supply and fix fully cast aluminium body finished with polyurethane paint (with prior treatment) bollard of length 736 mm & circular base diameter of 177 mm and max diameter of leg of bollard 127 mm surmounted with fully cast aluminium body finished with Supply and fix fully cast aluminium body finished with polyurethane paint (with prior treatment) bollard of length 736 mm & circular base diameter of 177 mm and max diameter of leg of bollard 127 mm surmounted with fully cast aluminium body finished with Supply and fix fully cast aluminium body finished with polyurethane paint (with prior treatment) bollard of length 736 mm & circular base diameter of 177 mm and max diameter of leg of bollard 127 mm surmounted with fully cast aluminium body finished with Supply and fix fully cast aluminium body finished with polyurethane paint (with prior treatment) bollard of length 736 mm & circular base diameter of 177 mm and max diameter of leg of bollard 127 mm surmounted with fully cast aluminium body finished with Supply and fix fully cast aluminium body finished with polyurethane paint (with prior treatment) bollard of length 736 mm & circular base diameter of 177 mm and max diameter of leg of bollard 127 mm surmounted with fully cast aluminium body finished with Supply and fix fully cast aluminium body finished with polyurethane paint (with prior treatment) bollard of length 736 mm & circular base diameter of 177 mm and max diameter of leg of bollard 127 mm surmounted with fully cast aluminium body finished with Supply and fix fully cast aluminium body finished with polyurethane paint (with prior treatment) bollard of length 736 mm & circular base diameter of 177 mm and max diameter of leg of bollard 127 mm surmounted with fully cast aluminium body finished with Supply and fix fully cast aluminium body finished with polyurethane paint (with prior treatment) bollard of length 736 mm & circular base diameter of 177 mm and max diameter of leg of bollard 127 mm surmounted with fully cast aluminium body finished with Supply and fix fully cast aluminium body finished with polyurethane paint (with prior treatment) bollard of length 736 mm & circular base diameter of 177 mm and max diameter of leg of bollard 127 mm surmounted with fully cast aluminium body finished with Supply and fix fully cast aluminium body finished with polyurethane paint (with prior treatment) bollard of length 736 mm & circular base diameter of 177 mm and max diameter of leg of bollard 127 mm surmounted with fully cast aluminium body finished with Supply and fix fully cast aluminium body finished with polyurethane paint (with prior treatment) bollard of length 736 mm & circular base diameter of 177 mm and max diameter of leg of bollard 127 mm surmounted with fully cast aluminium body finished with Supply and fix fully cast aluminium body finished with polyurethane paint (with prior treatment) bollard of length 736 mm & circular base diameter of 177 mm and max diameter of leg of bollard 127 mm surmounted with fully cast aluminium body finished with Supply and fix fully cast aluminium body finished with polyurethane paint (with prior treatment) bollard of length 736 mm & circular base diameter of 177 mm and max diameter of leg of bollard 127 mm surmounted with fully cast aluminium body finished with Supply and fix fully cast aluminium body finished with polyurethane paint (with prior treatment) bollard of length 736 mm & circular base diameter of 177 mm and max diameter of leg of bollard 127 mm surmounted with fully cast aluminium body finished with Supply and fix fully cast aluminium body finished with polyurethane paint (with prior treatment) bollard of length 736 mm & circular base diameter of 177 mm and max diameter of leg of bollard 127 mm surmounted with fully cast aluminium body finished with Supply and fix fully cast aluminium body finished with polyurethane paint (with prior treatment) bollard of length 736 mm & circular base diameter of 177 mm and max diameter of leg of bollard 127 mm surmounted with fully cast aluminium body finished with Supply and fix fully cast aluminium body finished with polyurethane paint (with prior treatment) bollard of length 736 mm & circular base diameter of 177 mm and max diameter of leg of bollard 127 mm surmounted with fully cast aluminium body finished with Supply and fix fully cast aluminium body finished with polyurethane paint (with prior treatment) bollard of length 736 mm & circular base diameter of 177 mm and max diameter of leg of bollard 127 mm surmounted with fully cast aluminium body finished with Supply and fix fully cast aluminium body finished with polyurethane paint (with prior treatment) bollard of length 736 mm & circular base diameter of 177 mm and max diameter of leg of bollard 127 mm surmounted with fully cast aluminium body finished with Supply and fix fully cast aluminium body finished with polyurethane paint (with prior treatment) bollard of length 736 mm & circular base diameter of 177 mm and max diameter of leg of bollard 127 mm surmounted with fully cast aluminium body finished with Supply and fix fully cast aluminium body finished with polyurethane paint (with prior treatment) bollard of length 736 mm & circular base diameter of 177 mm and max diameter of leg of bollard 127 mm surmounted with fully cast aluminium body finished with Supply and fix fully cast aluminium body finished with polyurethane paint (with prior treatment) bollard of length 736 mm & circular base diameter of 177 mm and max diameter of leg of bollard 127 mm surmounted with fully cast aluminium body finished with Supply and fix fully cast aluminium body finished with polyurethane paint (with prior treatment) bollard of length 736 mm & circular base diameter of 177 mm and max diameter of leg of bollard 127 mm surmounted with fully cast aluminium body finished with Supply and fix fully cast aluminium body finished with polyurethane paint (with prior treatment) bollard of length 736 mm & circular base diameter of 177 mm and max diameter of leg of bollard 127 mm surmounted with fully cast aluminium body finished with Supply and fix fully cast aluminium body finished with polyurethane paint (with prior treatment) bollard of length 736 mm & circular base diameter of 177 mm and max diameter of leg of bollard 127 mm surmounted with fully cast aluminium body finished with Supply and fix fully cast aluminium body finished with polyurethane paint (with prior treatment) bollard of length 736 mm & circular base diameter of 177 mm and max diameter of leg of bollard 127 mm surmounted with fully cast aluminium body finished with Supply and fix fully cast aluminium body finished with polyurethane paint (with prior treatment) bollard of length 736 mm & circular base diameter of 177 mm and max diameter of leg of bollard 127 mm surmounted with fully cast aluminium body finished with Supply and fix fully cast aluminium body finished with polyurethane paint (with prior treatment) bollard of length 736 mm & circular base diameter of 177 mm and max diameter of leg of bollard 127 mm surmounted with fully cast aluminium body finished with Supply and fix fully cast aluminium body finished with polyurethane paint (with prior treatment) bollard of length 736 mm & circular base diameter of 177 mm and max diameter of leg of bollard 127 mm surmounted with fully cast aluminium body finished with Supply and fix fully cast aluminium body finished with polyurethane paint (with prior treatment) bollard of length 736 mm & circular base diameter of 177 mm and max diameter of leg of bollard 127 mm surmounted with fully cast aluminium body finished with Supply and fix fully cast aluminium body finished with polyurethane paint (with prior treatment) bollard of length 736 mm & circular base diameter of 177 mm and max diameter of leg of bollard 127 mm surmounted with fully cast aluminium body finished with Supply and fix fully cast aluminium body finished with polyurethane paint (with prior treatment) bollard of length 736 mm & circular base diameter of 177 mm and max diameter of leg of bollard 127 mm surmounted with fully cast aluminium body finished with Supply and fix fully cast aluminium body finished with polyurethane paint (with prior treatment) bollard of length 736 mm & circular base diameter of 177 mm and max diameter of leg of bollard 127 mm surmounted with fully cast aluminium body finished with Supply and fix fully cast aluminium body finished with polyurethane paint (with prior treatment) bollard of length 736 mm & circular base diameter of 177 mm and max diameter of leg of bollard 127 mm surmounted with fully cast aluminium body finished with Supply and fix fully cast aluminium body finished with polyurethane paint (with prior treatment) bollard of length 736 mm & circular base diameter of 177 mm and max diameter of leg of bollard 127 mm surmounted with fully cast aluminium body finished with 0 Supply and fix fully cast aluminium body finished with polyurethane paint (with prior treatment) bollard of length 736 mm & circular base diameter of 177 mm and max diameter of leg of bollard 127 mm surmounted with fully cast aluminium body finished with 0

46 0 Supply and laying in replacement PVC copper cable 3 core 1.5 sqmm with pvc pipe laid inopen with the help of saddles of suitable size alongwith nut bolts all as specified and directed 23.19 Supply and laying in replacement PVC copper cable 3 core 1.5 sqmm with pvc pipe laid inopen with the help of saddles of suitable size alongwith nut bolts all as specified and directed 23.19 Supply and laying in replacement PVC copper cable 3 core 1.5 sqmm with pvc pipe laid inopen with the help of saddles of suitable size alongwith nut bolts all as specified and directed 23.19 1 Supply and laying in replacement PVC copper cable 3 core 1.5 sqmm with pvc pipe laid inopen with the help of saddles of suitable size alongwith nut bolts all as specified and directed 23.19 Supply and laying in replacement PVC copper cable 3 core 1.5 sqmm with pvc pipe laid inopen with the help of saddles of suitable size alongwith nut bolts all as specified and directed 23.19 Supply and laying in replacement PVC copper cable 3 core 1.5 sqmm with pvc pipe laid inopen with the help of saddles of suitable size alongwith nut bolts all as specified and directed 23.19 Supply and laying in replacement PVC copper cable 3 core 1.5 sqmm with pvc pipe laid inopen with the help of saddles of suitable size alongwith nut bolts all as specified and directed 23.19 Supply and laying in replacement PVC copper cable 3 core 1.5 sqmm with pvc pipe laid inopen with the help of saddles of suitable size alongwith nut bolts all as specified and directed 23.19 Supply and laying in replacement PVC copper cable 3 core 1.5 sqmm with pvc pipe laid inopen with the help of saddles of suitable size alongwith nut bolts all as specified and directed 23.19 Supply and laying in replacement PVC copper cable 3 core 1.5 sqmm with pvc pipe laid inopen with the help of saddles of suitable size alongwith nut bolts all as specified and directed 23.19 Supply and laying in replacement PVC copper cable 3 core 1.5 sqmm with pvc pipe laid inopen with the help of saddles of suitable size alongwith nut bolts all as specified and directed 23.19 Supply and laying in replacement PVC copper cable 3 core 1.5 sqmm with pvc pipe laid inopen with the help of saddles of suitable size alongwith nut bolts all as specified and directed 23.19 Supply and laying in replacement PVC copper cable 3 core 1.5 sqmm with pvc pipe laid inopen with the help of saddles of suitable size alongwith nut bolts all as specified and directed 23.19 Supply and laying in replacement PVC copper cable 3 core 1.5 sqmm with pvc pipe laid inopen with the help of saddles of suitable size alongwith nut bolts all as specified and directed 23.19 Supply and laying in replacement PVC copper cable 3 core 1.5 sqmm with pvc pipe laid inopen with the help of saddles of suitable size alongwith nut bolts all as specified and directed 23.19 Supply and laying in replacement PVC copper cable 3 core 1.5 sqmm with pvc pipe laid inopen with the help of saddles of suitable size alongwith nut bolts all as specified and directed 23.19 Supply and laying in replacement PVC copper cable 3 core 1.5 sqmm with pvc pipe laid inopen with the help of saddles of suitable size alongwith nut bolts all as specified and directed 23.19 Supply and laying in replacement PVC copper cable 3 core 1.5 sqmm with pvc pipe laid inopen with the help of saddles of suitable size alongwith nut bolts all as specified and directed 23.19 Supply and laying in replacement PVC copper cable 3 core 1.5 sqmm with pvc pipe laid inopen with the help of saddles of suitable size alongwith nut bolts all as specified and directed 23.19 Supply and laying in replacement PVC copper cable 3 core 1.5 sqmm with pvc pipe laid inopen with the help of saddles of suitable size alongwith nut bolts all as specified and directed 23.19 Supply and laying in replacement PVC copper cable 3 core 1.5 sqmm with pvc pipe laid inopen with the help of saddles of suitable size alongwith nut bolts all as specified and directed 23.19 Supply and laying in replacement PVC copper cable 3 core 1.5 sqmm with pvc pipe laid inopen with the help of saddles of suitable size alongwith nut bolts all as specified and directed 23.19 Supply and laying in replacement PVC copper cable 3 core 1.5 sqmm with pvc pipe laid inopen with the help of saddles of suitable size alongwith nut bolts all as specified and directed 23.19 Supply and laying in replacement PVC copper cable 3 core 1.5 sqmm with pvc pipe laid inopen with the help of saddles of suitable size alongwith nut bolts all as specified and directed 23.19 Supply and laying in replacement PVC copper cable 3 core 1.5 sqmm with pvc pipe laid inopen with the help of saddles of suitable size alongwith nut bolts all as specified and directed 23.19 Supply and laying in replacement PVC copper cable 3 core 1.5 sqmm with pvc pipe laid inopen with the help of saddles of suitable size alongwith nut bolts all as specified and directed 23.19 Supply and laying in replacement PVC copper cable 3 core 1.5 sqmm with pvc pipe laid inopen with the help of saddles of suitable size alongwith nut bolts all as specified and directed 23.19 Supply and laying in replacement PVC copper cable 3 core 1.5 sqmm with pvc pipe laid inopen with the help of saddles of suitable size alongwith nut bolts all as specified and directed 23.19 Supply and laying in replacement PVC copper cable 3 core 1.5 sqmm with pvc pipe laid inopen with the help of saddles of suitable size alongwith nut bolts all as specified and directed 23.19 Supply and laying in replacement PVC copper cable 3 core 1.5 sqmm with pvc pipe laid inopen with the help of saddles of suitable size alongwith nut bolts all as specified and directed 23.19 Supply and laying in replacement PVC copper cable 3 core 1.5 sqmm with pvc pipe laid inopen with the help of saddles of suitable size alongwith nut bolts all as specified and directed 23.19 Supply and laying in replacement PVC copper cable 3 core 1.5 sqmm with pvc pipe laid inopen with the help of saddles of suitable size alongwith nut bolts all as specified and directed 23.19 Supply and laying in replacement PVC copper cable 3 core 1.5 sqmm with pvc pipe laid inopen with the help of saddles of suitable size alongwith nut bolts all as specified and directed 23.19 Supply and laying in replacement PVC copper cable 3 core 1.5 sqmm with pvc pipe laid inopen with the help of saddles of suitable size alongwith nut bolts all as specified and directed 23.19 Supply and laying in replacement PVC copper cable 3 core 1.5 sqmm with pvc pipe laid inopen with the help of saddles of suitable size alongwith nut bolts all as specified and directed 23.19 Supply and laying in replacement PVC copper cable 3 core 1.5 sqmm with pvc pipe laid inopen with the help of saddles of suitable size alongwith nut bolts all as specified and directed 23.19 Supply and laying in replacement PVC copper cable 3 core 1.5 sqmm with pvc pipe laid inopen with the help of saddles of suitable size alongwith nut bolts all as specified and directed 23.19 Supply and laying in replacement PVC copper cable 3 core 1.5 sqmm with pvc pipe laid inopen with the help of saddles of suitable size alongwith nut bolts all as specified and directed 23.19 Supply and laying in replacement PVC copper cable 3 core 1.5 sqmm with pvc pipe laid inopen with the help of saddles of suitable size alongwith nut bolts all as specified and directed 23.19 Supply and laying in replacement PVC copper cable 3 core 1.5 sqmm with pvc pipe laid inopen with the help of saddles of suitable size alongwith nut bolts all as specified and directed 23.19 Supply and laying in replacement PVC copper cable 3 core 1.5 sqmm with pvc pipe laid inopen with the help of saddles of suitable size alongwith nut bolts all as specified and directed 23.19 Supply and laying in replacement PVC copper cable 3 core 1.5 sqmm with pvc pipe laid inopen with the help of saddles of suitable size alongwith nut bolts all as specified and directed 23.19 Supply and laying in replacement PVC copper cable 3 core 1.5 sqmm with pvc pipe laid inopen with the help of saddles of suitable size alongwith nut bolts all as specified and directed 23.19 Supply and laying in replacement PVC copper cable 3 core 1.5 sqmm with pvc pipe laid inopen with the help of saddles of suitable size alongwith nut bolts all as specified and directed 23.19 0 Supply and laying in replacement PVC copper cable 3 core 1.5 sqmm with pvc pipe laid inopen with the help of saddles of suitable size alongwith nut bolts all as specified and directed 23.19 0

11 0 Supply and fix Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switch 230V AC, Auto/Manual selector switch, MCB TPN, 32 Amps, ON/OFF indicator all prewired and making provision for fixing outgoi Supply and fix Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switch 230V AC, Auto/Manual selector switch, MCB TPN, 32 Amps, ON/OFF indicator all prewired and making provision for fixing outgoi Supply and fix Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switch 230V AC, Auto/Manual selector switch, MCB TPN, 32 Amps, ON/OFF indicator all prewired and making provision for fixing outgoi 1 Supply and fix Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switch 230V AC, Auto/Manual selector switch, MCB TPN, 32 Amps, ON/OFF indicator all prewired and making provision for fixing outgoi Supply and fix Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switch 230V AC, Auto/Manual selector switch, MCB TPN, 32 Amps, ON/OFF indicator all prewired and making provision for fixing outgoi Supply and fix Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switch 230V AC, Auto/Manual selector switch, MCB TPN, 32 Amps, ON/OFF indicator all prewired and making provision for fixing outgoi Supply and fix Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switch 230V AC, Auto/Manual selector switch, MCB TPN, 32 Amps, ON/OFF indicator all prewired and making provision for fixing outgoi Supply and fix Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switch 230V AC, Auto/Manual selector switch, MCB TPN, 32 Amps, ON/OFF indicator all prewired and making provision for fixing outgoi Supply and fix Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switch 230V AC, Auto/Manual selector switch, MCB TPN, 32 Amps, ON/OFF indicator all prewired and making provision for fixing outgoi Supply and fix Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switch 230V AC, Auto/Manual selector switch, MCB TPN, 32 Amps, ON/OFF indicator all prewired and making provision for fixing outgoi Supply and fix Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switch 230V AC, Auto/Manual selector switch, MCB TPN, 32 Amps, ON/OFF indicator all prewired and making provision for fixing outgoi Supply and fix Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switch 230V AC, Auto/Manual selector switch, MCB TPN, 32 Amps, ON/OFF indicator all prewired and making provision for fixing outgoi Supply and fix Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switch 230V AC, Auto/Manual selector switch, MCB TPN, 32 Amps, ON/OFF indicator all prewired and making provision for fixing outgoi Supply and fix Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switch 230V AC, Auto/Manual selector switch, MCB TPN, 32 Amps, ON/OFF indicator all prewired and making provision for fixing outgoi Supply and fix Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switch 230V AC, Auto/Manual selector switch, MCB TPN, 32 Amps, ON/OFF indicator all prewired and making provision for fixing outgoi Supply and fix Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switch 230V AC, Auto/Manual selector switch, MCB TPN, 32 Amps, ON/OFF indicator all prewired and making provision for fixing outgoi Supply and fix Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switch 230V AC, Auto/Manual selector switch, MCB TPN, 32 Amps, ON/OFF indicator all prewired and making provision for fixing outgoi Supply and fix Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switch 230V AC, Auto/Manual selector switch, MCB TPN, 32 Amps, ON/OFF indicator all prewired and making provision for fixing outgoi Supply and fix Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switch 230V AC, Auto/Manual selector switch, MCB TPN, 32 Amps, ON/OFF indicator all prewired and making provision for fixing outgoi Supply and fix Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switch 230V AC, Auto/Manual selector switch, MCB TPN, 32 Amps, ON/OFF indicator all prewired and making provision for fixing outgoi Supply and fix Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switch 230V AC, Auto/Manual selector switch, MCB TPN, 32 Amps, ON/OFF indicator all prewired and making provision for fixing outgoi Supply and fix Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switch 230V AC, Auto/Manual selector switch, MCB TPN, 32 Amps, ON/OFF indicator all prewired and making provision for fixing outgoi Supply and fix Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switch 230V AC, Auto/Manual selector switch, MCB TPN, 32 Amps, ON/OFF indicator all prewired and making provision for fixing outgoi Supply and fix Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switch 230V AC, Auto/Manual selector switch, MCB TPN, 32 Amps, ON/OFF indicator all prewired and making provision for fixing outgoi Supply and fix Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switch 230V AC, Auto/Manual selector switch, MCB TPN, 32 Amps, ON/OFF indicator all prewired and making provision for fixing outgoi Supply and fix Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switch 230V AC, Auto/Manual selector switch, MCB TPN, 32 Amps, ON/OFF indicator all prewired and making provision for fixing outgoi Supply and fix Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switch 230V AC, Auto/Manual selector switch, MCB TPN, 32 Amps, ON/OFF indicator all prewired and making provision for fixing outgoi Supply and fix Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switch 230V AC, Auto/Manual selector switch, MCB TPN, 32 Amps, ON/OFF indicator all prewired and making provision for fixing outgoi Supply and fix Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switch 230V AC, Auto/Manual selector switch, MCB TPN, 32 Amps, ON/OFF indicator all prewired and making provision for fixing outgoi Supply and fix Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switch 230V AC, Auto/Manual selector switch, MCB TPN, 32 Amps, ON/OFF indicator all prewired and making provision for fixing outgoi Supply and fix Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switch 230V AC, Auto/Manual selector switch, MCB TPN, 32 Amps, ON/OFF indicator all prewired and making provision for fixing outgoi Supply and fix Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switch 230V AC, Auto/Manual selector switch, MCB TPN, 32 Amps, ON/OFF indicator all prewired and making provision for fixing outgoi Supply and fix Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switch 230V AC, Auto/Manual selector switch, MCB TPN, 32 Amps, ON/OFF indicator all prewired and making provision for fixing outgoi Supply and fix Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switch 230V AC, Auto/Manual selector switch, MCB TPN, 32 Amps, ON/OFF indicator all prewired and making provision for fixing outgoi Supply and fix Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switch 230V AC, Auto/Manual selector switch, MCB TPN, 32 Amps, ON/OFF indicator all prewired and making provision for fixing outgoi Supply and fix Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switch 230V AC, Auto/Manual selector switch, MCB TPN, 32 Amps, ON/OFF indicator all prewired and making provision for fixing outgoi Supply and fix Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switch 230V AC, Auto/Manual selector switch, MCB TPN, 32 Amps, ON/OFF indicator all prewired and making provision for fixing outgoi Supply and fix Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switch 230V AC, Auto/Manual selector switch, MCB TPN, 32 Amps, ON/OFF indicator all prewired and making provision for fixing outgoi Supply and fix Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switch 230V AC, Auto/Manual selector switch, MCB TPN, 32 Amps, ON/OFF indicator all prewired and making provision for fixing outgoi Supply and fix Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switch 230V AC, Auto/Manual selector switch, MCB TPN, 32 Amps, ON/OFF indicator all prewired and making provision for fixing outgoi Supply and fix Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switch 230V AC, Auto/Manual selector switch, MCB TPN, 32 Amps, ON/OFF indicator all prewired and making provision for fixing outgoi Supply and fix Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switch 230V AC, Auto/Manual selector switch, MCB TPN, 32 Amps, ON/OFF indicator all prewired and making provision for fixing outgoi Supply and fix Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switch 230V AC, Auto/Manual selector switch, MCB TPN, 32 Amps, ON/OFF indicator all prewired and making provision for fixing outgoi Supply and fix Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switch 230V AC, Auto/Manual selector switch, MCB TPN, 32 Amps, ON/OFF indicator all prewired and making provision for fixing outgoi 0 Supply and fix Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switch 230V AC, Auto/Manual selector switch, MCB TPN, 32 Amps, ON/OFF indicator all prewired and making provision for fixing outgoi 0

SUMMER APPLIANCES 24.00 SUMMER APPLIANCES 24.00 SUMMER APPLIANCES 24.00 SUMMER APPLIANCES 24.00 SUMMER APPLIANCES 24.00 SUMMER APPLIANCES 24.00 SUMMER APPLIANCES 24.00 SUMMER APPLIANCES 24.00 SUMMER APPLIANCES 24.00 SUMMER APPLIANCES 24.00 SUMMER APPLIANCES 24.00 SUMMER APPLIANCES 24.00 SUMMER APPLIANCES 24.00 SUMMER APPLIANCES 24.00 SUMMER APPLIANCES 24.00 SUMMER APPLIANCES 24.00 SUMMER APPLIANCES 24.00 SUMMER APPLIANCES 24.00 SUMMER APPLIANCES 24.00 SUMMER APPLIANCES 24.00 SUMMER APPLIANCES 24.00 SUMMER APPLIANCES 24.00 SUMMER APPLIANCES 24.00 SUMMER APPLIANCES 24.00 SUMMER APPLIANCES 24.00 SUMMER APPLIANCES 24.00 SUMMER APPLIANCES 24.00 SUMMER APPLIANCES 24.00 SUMMER APPLIANCES 24.00 SUMMER APPLIANCES 24.00 SUMMER APPLIANCES 24.00 SUMMER APPLIANCES 24.00 SUMMER APPLIANCES 24.00 SUMMER APPLIANCES 24.00 SUMMER APPLIANCES 24.00 SUMMER APPLIANCES 24.00 SUMMER APPLIANCES 24.00 SUMMER APPLIANCES 24.00 SUMMER APPLIANCES 24.00 SUMMER APPLIANCES 24.00 SUMMER APPLIANCES 24.00 SUMMER APPLIANCES 24.00 SUMMER APPLIANCES 24.00 SUMMER APPLIANCES 24.00 SUMMER APPLIANCES 24.00

1 0 Supply and fix single door refrigerator electric driven single phase 230 volts, AC 50 Hz,of capacity 195 litre or next available higher capacity with BEE approved, 5 star rating with inbuilt stablizer complete including electric connection complete all as Supply and fix single door refrigerator electric driven single phase 230 volts, AC 50 Hz,of capacity 195 litre or next available higher capacity with BEE approved, 5 star rating with inbuilt stablizer complete including electric connection complete all as Supply and fix single door refrigerator electric driven single phase 230 volts, AC 50 Hz,of capacity 195 litre or next available higher capacity with BEE approved, 5 star rating with inbuilt stablizer complete including electric connection complete all as 1 Supply and fix single door refrigerator electric driven single phase 230 volts, AC 50 Hz,of capacity 195 litre or next available higher capacity with BEE approved, 5 star rating with inbuilt stablizer complete including electric connection complete all as Supply and fix single door refrigerator electric driven single phase 230 volts, AC 50 Hz,of capacity 195 litre or next available higher capacity with BEE approved, 5 star rating with inbuilt stablizer complete including electric connection complete all as Supply and fix single door refrigerator electric driven single phase 230 volts, AC 50 Hz,of capacity 195 litre or next available higher capacity with BEE approved, 5 star rating with inbuilt stablizer complete including electric connection complete all as Supply and fix single door refrigerator electric driven single phase 230 volts, AC 50 Hz,of capacity 195 litre or next available higher capacity with BEE approved, 5 star rating with inbuilt stablizer complete including electric connection complete all as Supply and fix single door refrigerator electric driven single phase 230 volts, AC 50 Hz,of capacity 195 litre or next available higher capacity with BEE approved, 5 star rating with inbuilt stablizer complete including electric connection complete all as Supply and fix single door refrigerator electric driven single phase 230 volts, AC 50 Hz,of capacity 195 litre or next available higher capacity with BEE approved, 5 star rating with inbuilt stablizer complete including electric connection complete all as Supply and fix single door refrigerator electric driven single phase 230 volts, AC 50 Hz,of capacity 195 litre or next available higher capacity with BEE approved, 5 star rating with inbuilt stablizer complete including electric connection complete all as Supply and fix single door refrigerator electric driven single phase 230 volts, AC 50 Hz,of capacity 195 litre or next available higher capacity with BEE approved, 5 star rating with inbuilt stablizer complete including electric connection complete all as Supply and fix single door refrigerator electric driven single phase 230 volts, AC 50 Hz,of capacity 195 litre or next available higher capacity with BEE approved, 5 star rating with inbuilt stablizer complete including electric connection complete all as Supply and fix single door refrigerator electric driven single phase 230 volts, AC 50 Hz,of capacity 195 litre or next available higher capacity with BEE approved, 5 star rating with inbuilt stablizer complete including electric connection complete all as Supply and fix single door refrigerator electric driven single phase 230 volts, AC 50 Hz,of capacity 195 litre or next available higher capacity with BEE approved, 5 star rating with inbuilt stablizer complete including electric connection complete all as Supply and fix single door refrigerator electric driven single phase 230 volts, AC 50 Hz,of capacity 195 litre or next available higher capacity with BEE approved, 5 star rating with inbuilt stablizer complete including electric connection complete all as Supply and fix single door refrigerator electric driven single phase 230 volts, AC 50 Hz,of capacity 195 litre or next available higher capacity with BEE approved, 5 star rating with inbuilt stablizer complete including electric connection complete all as Supply and fix single door refrigerator electric driven single phase 230 volts, AC 50 Hz,of capacity 195 litre or next available higher capacity with BEE approved, 5 star rating with inbuilt stablizer complete including electric connection complete all as Supply and fix single door refrigerator electric driven single phase 230 volts, AC 50 Hz,of capacity 195 litre or next available higher capacity with BEE approved, 5 star rating with inbuilt stablizer complete including electric connection complete all as Supply and fix single door refrigerator electric driven single phase 230 volts, AC 50 Hz,of capacity 195 litre or next available higher capacity with BEE approved, 5 star rating with inbuilt stablizer complete including electric connection complete all as Supply and fix single door refrigerator electric driven single phase 230 volts, AC 50 Hz,of capacity 195 litre or next available higher capacity with BEE approved, 5 star rating with inbuilt stablizer complete including electric connection complete all as Supply and fix single door refrigerator electric driven single phase 230 volts, AC 50 Hz,of capacity 195 litre or next available higher capacity with BEE approved, 5 star rating with inbuilt stablizer complete including electric connection complete all as Supply and fix single door refrigerator electric driven single phase 230 volts, AC 50 Hz,of capacity 195 litre or next available higher capacity with BEE approved, 5 star rating with inbuilt stablizer complete including electric connection complete all as Supply and fix single door refrigerator electric driven single phase 230 volts, AC 50 Hz,of capacity 195 litre or next available higher capacity with BEE approved, 5 star rating with inbuilt stablizer complete including electric connection complete all as Supply and fix single door refrigerator electric driven single phase 230 volts, AC 50 Hz,of capacity 195 litre or next available higher capacity with BEE approved, 5 star rating with inbuilt stablizer complete including electric connection complete all as Supply and fix single door refrigerator electric driven single phase 230 volts, AC 50 Hz,of capacity 195 litre or next available higher capacity with BEE approved, 5 star rating with inbuilt stablizer complete including electric connection complete all as Supply and fix single door refrigerator electric driven single phase 230 volts, AC 50 Hz,of capacity 195 litre or next available higher capacity with BEE approved, 5 star rating with inbuilt stablizer complete including electric connection complete all as Supply and fix single door refrigerator electric driven single phase 230 volts, AC 50 Hz,of capacity 195 litre or next available higher capacity with BEE approved, 5 star rating with inbuilt stablizer complete including electric connection complete all as Supply and fix single door refrigerator electric driven single phase 230 volts, AC 50 Hz,of capacity 195 litre or next available higher capacity with BEE approved, 5 star rating with inbuilt stablizer complete including electric connection complete all as Supply and fix single door refrigerator electric driven single phase 230 volts, AC 50 Hz,of capacity 195 litre or next available higher capacity with BEE approved, 5 star rating with inbuilt stablizer complete including electric connection complete all as Supply and fix single door refrigerator electric driven single phase 230 volts, AC 50 Hz,of capacity 195 litre or next available higher capacity with BEE approved, 5 star rating with inbuilt stablizer complete including electric connection complete all as Supply and fix single door refrigerator electric driven single phase 230 volts, AC 50 Hz,of capacity 195 litre or next available higher capacity with BEE approved, 5 star rating with inbuilt stablizer complete including electric connection complete all as Supply and fix single door refrigerator electric driven single phase 230 volts, AC 50 Hz,of capacity 195 litre or next available higher capacity with BEE approved, 5 star rating with inbuilt stablizer complete including electric connection complete all as Supply and fix single door refrigerator electric driven single phase 230 volts, AC 50 Hz,of capacity 195 litre or next available higher capacity with BEE approved, 5 star rating with inbuilt stablizer complete including electric connection complete all as Supply and fix single door refrigerator electric driven single phase 230 volts, AC 50 Hz,of capacity 195 litre or next available higher capacity with BEE approved, 5 star rating with inbuilt stablizer complete including electric connection complete all as Supply and fix single door refrigerator electric driven single phase 230 volts, AC 50 Hz,of capacity 195 litre or next available higher capacity with BEE approved, 5 star rating with inbuilt stablizer complete including electric connection complete all as Supply and fix single door refrigerator electric driven single phase 230 volts, AC 50 Hz,of capacity 195 litre or next available higher capacity with BEE approved, 5 star rating with inbuilt stablizer complete including electric connection complete all as Supply and fix single door refrigerator electric driven single phase 230 volts, AC 50 Hz,of capacity 195 litre or next available higher capacity with BEE approved, 5 star rating with inbuilt stablizer complete including electric connection complete all as Supply and fix single door refrigerator electric driven single phase 230 volts, AC 50 Hz,of capacity 195 litre or next available higher capacity with BEE approved, 5 star rating with inbuilt stablizer complete including electric connection complete all as Supply and fix single door refrigerator electric driven single phase 230 volts, AC 50 Hz,of capacity 195 litre or next available higher capacity with BEE approved, 5 star rating with inbuilt stablizer complete including electric connection complete all as Supply and fix single door refrigerator electric driven single phase 230 volts, AC 50 Hz,of capacity 195 litre or next available higher capacity with BEE approved, 5 star rating with inbuilt stablizer complete including electric connection complete all as Supply and fix single door refrigerator electric driven single phase 230 volts, AC 50 Hz,of capacity 195 litre or next available higher capacity with BEE approved, 5 star rating with inbuilt stablizer complete including electric connection complete all as Supply and fix single door refrigerator electric driven single phase 230 volts, AC 50 Hz,of capacity 195 litre or next available higher capacity with BEE approved, 5 star rating with inbuilt stablizer complete including electric connection complete all as Supply and fix single door refrigerator electric driven single phase 230 volts, AC 50 Hz,of capacity 195 litre or next available higher capacity with BEE approved, 5 star rating with inbuilt stablizer complete including electric connection complete all as Supply and fix single door refrigerator electric driven single phase 230 volts, AC 50 Hz,of capacity 195 litre or next available higher capacity with BEE approved, 5 star rating with inbuilt stablizer complete including electric connection complete all as 0 Supply and fix single door refrigerator electric driven single phase 230 volts, AC 50 Hz,of capacity 195 litre or next available higher capacity with BEE approved, 5 star rating with inbuilt stablizer complete including electric connection complete all as 0

14 0 Desert Cooler of size 26 x 26 x 33 inch or next available higher size having nominal air flow capacity 4000 cubic metre per hour single phase 240 volts 50 hz made out of plain GI sheet 18 SWG & side panels of 22 SWG , and having water storage capacity is Desert Cooler of size 26 x 26 x 33 inch or next available higher size having nominal air flow capacity 4000 cubic metre per hour single phase 240 volts 50 hz made out of plain GI sheet 18 SWG & side panels of 22 SWG , and having water storage capacity is Desert Cooler of size 26 x 26 x 33 inch or next available higher size having nominal air flow capacity 4000 cubic metre per hour single phase 240 volts 50 hz made out of plain GI sheet 18 SWG & side panels of 22 SWG , and having water storage capacity is 1 Desert Cooler of size 26 x 26 x 33 inch or next available higher size having nominal air flow capacity 4000 cubic metre per hour single phase 240 volts 50 hz made out of plain GI sheet 18 SWG & side panels of 22 SWG , and having water storage capacity is Desert Cooler of size 26 x 26 x 33 inch or next available higher size having nominal air flow capacity 4000 cubic metre per hour single phase 240 volts 50 hz made out of plain GI sheet 18 SWG & side panels of 22 SWG , and having water storage capacity is Desert Cooler of size 26 x 26 x 33 inch or next available higher size having nominal air flow capacity 4000 cubic metre per hour single phase 240 volts 50 hz made out of plain GI sheet 18 SWG & side panels of 22 SWG , and having water storage capacity is Desert Cooler of size 26 x 26 x 33 inch or next available higher size having nominal air flow capacity 4000 cubic metre per hour single phase 240 volts 50 hz made out of plain GI sheet 18 SWG & side panels of 22 SWG , and having water storage capacity is Desert Cooler of size 26 x 26 x 33 inch or next available higher size having nominal air flow capacity 4000 cubic metre per hour single phase 240 volts 50 hz made out of plain GI sheet 18 SWG & side panels of 22 SWG , and having water storage capacity is Desert Cooler of size 26 x 26 x 33 inch or next available higher size having nominal air flow capacity 4000 cubic metre per hour single phase 240 volts 50 hz made out of plain GI sheet 18 SWG & side panels of 22 SWG , and having water storage capacity is Desert Cooler of size 26 x 26 x 33 inch or next available higher size having nominal air flow capacity 4000 cubic metre per hour single phase 240 volts 50 hz made out of plain GI sheet 18 SWG & side panels of 22 SWG , and having water storage capacity is Desert Cooler of size 26 x 26 x 33 inch or next available higher size having nominal air flow capacity 4000 cubic metre per hour single phase 240 volts 50 hz made out of plain GI sheet 18 SWG & side panels of 22 SWG , and having water storage capacity is Desert Cooler of size 26 x 26 x 33 inch or next available higher size having nominal air flow capacity 4000 cubic metre per hour single phase 240 volts 50 hz made out of plain GI sheet 18 SWG & side panels of 22 SWG , and having water storage capacity is Desert Cooler of size 26 x 26 x 33 inch or next available higher size having nominal air flow capacity 4000 cubic metre per hour single phase 240 volts 50 hz made out of plain GI sheet 18 SWG & side panels of 22 SWG , and having water storage capacity is Desert Cooler of size 26 x 26 x 33 inch or next available higher size having nominal air flow capacity 4000 cubic metre per hour single phase 240 volts 50 hz made out of plain GI sheet 18 SWG & side panels of 22 SWG , and having water storage capacity is Desert Cooler of size 26 x 26 x 33 inch or next available higher size having nominal air flow capacity 4000 cubic metre per hour single phase 240 volts 50 hz made out of plain GI sheet 18 SWG & side panels of 22 SWG , and having water storage capacity is Desert Cooler of size 26 x 26 x 33 inch or next available higher size having nominal air flow capacity 4000 cubic metre per hour single phase 240 volts 50 hz made out of plain GI sheet 18 SWG & side panels of 22 SWG , and having water storage capacity is Desert Cooler of size 26 x 26 x 33 inch or next available higher size having nominal air flow capacity 4000 cubic metre per hour single phase 240 volts 50 hz made out of plain GI sheet 18 SWG & side panels of 22 SWG , and having water storage capacity is Desert Cooler of size 26 x 26 x 33 inch or next available higher size having nominal air flow capacity 4000 cubic metre per hour single phase 240 volts 50 hz made out of plain GI sheet 18 SWG & side panels of 22 SWG , and having water storage capacity is Desert Cooler of size 26 x 26 x 33 inch or next available higher size having nominal air flow capacity 4000 cubic metre per hour single phase 240 volts 50 hz made out of plain GI sheet 18 SWG & side panels of 22 SWG , and having water storage capacity is Desert Cooler of size 26 x 26 x 33 inch or next available higher size having nominal air flow capacity 4000 cubic metre per hour single phase 240 volts 50 hz made out of plain GI sheet 18 SWG & side panels of 22 SWG , and having water storage capacity is Desert Cooler of size 26 x 26 x 33 inch or next available higher size having nominal air flow capacity 4000 cubic metre per hour single phase 240 volts 50 hz made out of plain GI sheet 18 SWG & side panels of 22 SWG , and having water storage capacity is Desert Cooler of size 26 x 26 x 33 inch or next available higher size having nominal air flow capacity 4000 cubic metre per hour single phase 240 volts 50 hz made out of plain GI sheet 18 SWG & side panels of 22 SWG , and having water storage capacity is Desert Cooler of size 26 x 26 x 33 inch or next available higher size having nominal air flow capacity 4000 cubic metre per hour single phase 240 volts 50 hz made out of plain GI sheet 18 SWG & side panels of 22 SWG , and having water storage capacity is Desert Cooler of size 26 x 26 x 33 inch or next available higher size having nominal air flow capacity 4000 cubic metre per hour single phase 240 volts 50 hz made out of plain GI sheet 18 SWG & side panels of 22 SWG , and having water storage capacity is Desert Cooler of size 26 x 26 x 33 inch or next available higher size having nominal air flow capacity 4000 cubic metre per hour single phase 240 volts 50 hz made out of plain GI sheet 18 SWG & side panels of 22 SWG , and having water storage capacity is Desert Cooler of size 26 x 26 x 33 inch or next available higher size having nominal air flow capacity 4000 cubic metre per hour single phase 240 volts 50 hz made out of plain GI sheet 18 SWG & side panels of 22 SWG , and having water storage capacity is Desert Cooler of size 26 x 26 x 33 inch or next available higher size having nominal air flow capacity 4000 cubic metre per hour single phase 240 volts 50 hz made out of plain GI sheet 18 SWG & side panels of 22 SWG , and having water storage capacity is Desert Cooler of size 26 x 26 x 33 inch or next available higher size having nominal air flow capacity 4000 cubic metre per hour single phase 240 volts 50 hz made out of plain GI sheet 18 SWG & side panels of 22 SWG , and having water storage capacity is Desert Cooler of size 26 x 26 x 33 inch or next available higher size having nominal air flow capacity 4000 cubic metre per hour single phase 240 volts 50 hz made out of plain GI sheet 18 SWG & side panels of 22 SWG , and having water storage capacity is Desert Cooler of size 26 x 26 x 33 inch or next available higher size having nominal air flow capacity 4000 cubic metre per hour single phase 240 volts 50 hz made out of plain GI sheet 18 SWG & side panels of 22 SWG , and having water storage capacity is Desert Cooler of size 26 x 26 x 33 inch or next available higher size having nominal air flow capacity 4000 cubic metre per hour single phase 240 volts 50 hz made out of plain GI sheet 18 SWG & side panels of 22 SWG , and having water storage capacity is Desert Cooler of size 26 x 26 x 33 inch or next available higher size having nominal air flow capacity 4000 cubic metre per hour single phase 240 volts 50 hz made out of plain GI sheet 18 SWG & side panels of 22 SWG , and having water storage capacity is Desert Cooler of size 26 x 26 x 33 inch or next available higher size having nominal air flow capacity 4000 cubic metre per hour single phase 240 volts 50 hz made out of plain GI sheet 18 SWG & side panels of 22 SWG , and having water storage capacity is Desert Cooler of size 26 x 26 x 33 inch or next available higher size having nominal air flow capacity 4000 cubic metre per hour single phase 240 volts 50 hz made out of plain GI sheet 18 SWG & side panels of 22 SWG , and having water storage capacity is Desert Cooler of size 26 x 26 x 33 inch or next available higher size having nominal air flow capacity 4000 cubic metre per hour single phase 240 volts 50 hz made out of plain GI sheet 18 SWG & side panels of 22 SWG , and having water storage capacity is Desert Cooler of size 26 x 26 x 33 inch or next available higher size having nominal air flow capacity 4000 cubic metre per hour single phase 240 volts 50 hz made out of plain GI sheet 18 SWG & side panels of 22 SWG , and having water storage capacity is Desert Cooler of size 26 x 26 x 33 inch or next available higher size having nominal air flow capacity 4000 cubic metre per hour single phase 240 volts 50 hz made out of plain GI sheet 18 SWG & side panels of 22 SWG , and having water storage capacity is Desert Cooler of size 26 x 26 x 33 inch or next available higher size having nominal air flow capacity 4000 cubic metre per hour single phase 240 volts 50 hz made out of plain GI sheet 18 SWG & side panels of 22 SWG , and having water storage capacity is Desert Cooler of size 26 x 26 x 33 inch or next available higher size having nominal air flow capacity 4000 cubic metre per hour single phase 240 volts 50 hz made out of plain GI sheet 18 SWG & side panels of 22 SWG , and having water storage capacity is Desert Cooler of size 26 x 26 x 33 inch or next available higher size having nominal air flow capacity 4000 cubic metre per hour single phase 240 volts 50 hz made out of plain GI sheet 18 SWG & side panels of 22 SWG , and having water storage capacity is Desert Cooler of size 26 x 26 x 33 inch or next available higher size having nominal air flow capacity 4000 cubic metre per hour single phase 240 volts 50 hz made out of plain GI sheet 18 SWG & side panels of 22 SWG , and having water storage capacity is Desert Cooler of size 26 x 26 x 33 inch or next available higher size having nominal air flow capacity 4000 cubic metre per hour single phase 240 volts 50 hz made out of plain GI sheet 18 SWG & side panels of 22 SWG , and having water storage capacity is Desert Cooler of size 26 x 26 x 33 inch or next available higher size having nominal air flow capacity 4000 cubic metre per hour single phase 240 volts 50 hz made out of plain GI sheet 18 SWG & side panels of 22 SWG , and having water storage capacity is Desert Cooler of size 26 x 26 x 33 inch or next available higher size having nominal air flow capacity 4000 cubic metre per hour single phase 240 volts 50 hz made out of plain GI sheet 18 SWG & side panels of 22 SWG , and having water storage capacity is 0 Desert Cooler of size 26 x 26 x 33 inch or next available higher size having nominal air flow capacity 4000 cubic metre per hour single phase 240 volts 50 hz made out of plain GI sheet 18 SWG & side panels of 22 SWG , and having water storage capacity is 0

15 0 Voltage stablizer for automatic operation single phase naturally air cooled indoor type and designed for input variatiion between 170 volts to 250 volts with output voltage stabilized at 230 volts with accuracy of +/- 2.5% of capacity 1 KVA. 24.03 Voltage stablizer for automatic operation single phase naturally air cooled indoor type and designed for input variatiion between 170 volts to 250 volts with output voltage stabilized at 230 volts with accuracy of +/- 2.5% of capacity 1 KVA. 24.03 Voltage stablizer for automatic operation single phase naturally air cooled indoor type and designed for input variatiion between 170 volts to 250 volts with output voltage stabilized at 230 volts with accuracy of +/- 2.5% of capacity 1 KVA. 24.03 1 Voltage stablizer for automatic operation single phase naturally air cooled indoor type and designed for input variatiion between 170 volts to 250 volts with output voltage stabilized at 230 volts with accuracy of +/- 2.5% of capacity 1 KVA. 24.03 Voltage stablizer for automatic operation single phase naturally air cooled indoor type and designed for input variatiion between 170 volts to 250 volts with output voltage stabilized at 230 volts with accuracy of +/- 2.5% of capacity 1 KVA. 24.03 Voltage stablizer for automatic operation single phase naturally air cooled indoor type and designed for input variatiion between 170 volts to 250 volts with output voltage stabilized at 230 volts with accuracy of +/- 2.5% of capacity 1 KVA. 24.03 Voltage stablizer for automatic operation single phase naturally air cooled indoor type and designed for input variatiion between 170 volts to 250 volts with output voltage stabilized at 230 volts with accuracy of +/- 2.5% of capacity 1 KVA. 24.03 Voltage stablizer for automatic operation single phase naturally air cooled indoor type and designed for input variatiion between 170 volts to 250 volts with output voltage stabilized at 230 volts with accuracy of +/- 2.5% of capacity 1 KVA. 24.03 Voltage stablizer for automatic operation single phase naturally air cooled indoor type and designed for input variatiion between 170 volts to 250 volts with output voltage stabilized at 230 volts with accuracy of +/- 2.5% of capacity 1 KVA. 24.03 Voltage stablizer for automatic operation single phase naturally air cooled indoor type and designed for input variatiion between 170 volts to 250 volts with output voltage stabilized at 230 volts with accuracy of +/- 2.5% of capacity 1 KVA. 24.03 Voltage stablizer for automatic operation single phase naturally air cooled indoor type and designed for input variatiion between 170 volts to 250 volts with output voltage stabilized at 230 volts with accuracy of +/- 2.5% of capacity 1 KVA. 24.03 Voltage stablizer for automatic operation single phase naturally air cooled indoor type and designed for input variatiion between 170 volts to 250 volts with output voltage stabilized at 230 volts with accuracy of +/- 2.5% of capacity 1 KVA. 24.03 Voltage stablizer for automatic operation single phase naturally air cooled indoor type and designed for input variatiion between 170 volts to 250 volts with output voltage stabilized at 230 volts with accuracy of +/- 2.5% of capacity 1 KVA. 24.03 Voltage stablizer for automatic operation single phase naturally air cooled indoor type and designed for input variatiion between 170 volts to 250 volts with output voltage stabilized at 230 volts with accuracy of +/- 2.5% of capacity 1 KVA. 24.03 Voltage stablizer for automatic operation single phase naturally air cooled indoor type and designed for input variatiion between 170 volts to 250 volts with output voltage stabilized at 230 volts with accuracy of +/- 2.5% of capacity 1 KVA. 24.03 Voltage stablizer for automatic operation single phase naturally air cooled indoor type and designed for input variatiion between 170 volts to 250 volts with output voltage stabilized at 230 volts with accuracy of +/- 2.5% of capacity 1 KVA. 24.03 Voltage stablizer for automatic operation single phase naturally air cooled indoor type and designed for input variatiion between 170 volts to 250 volts with output voltage stabilized at 230 volts with accuracy of +/- 2.5% of capacity 1 KVA. 24.03 Voltage stablizer for automatic operation single phase naturally air cooled indoor type and designed for input variatiion between 170 volts to 250 volts with output voltage stabilized at 230 volts with accuracy of +/- 2.5% of capacity 1 KVA. 24.03 Voltage stablizer for automatic operation single phase naturally air cooled indoor type and designed for input variatiion between 170 volts to 250 volts with output voltage stabilized at 230 volts with accuracy of +/- 2.5% of capacity 1 KVA. 24.03 Voltage stablizer for automatic operation single phase naturally air cooled indoor type and designed for input variatiion between 170 volts to 250 volts with output voltage stabilized at 230 volts with accuracy of +/- 2.5% of capacity 1 KVA. 24.03 Voltage stablizer for automatic operation single phase naturally air cooled indoor type and designed for input variatiion between 170 volts to 250 volts with output voltage stabilized at 230 volts with accuracy of +/- 2.5% of capacity 1 KVA. 24.03 Voltage stablizer for automatic operation single phase naturally air cooled indoor type and designed for input variatiion between 170 volts to 250 volts with output voltage stabilized at 230 volts with accuracy of +/- 2.5% of capacity 1 KVA. 24.03 Voltage stablizer for automatic operation single phase naturally air cooled indoor type and designed for input variatiion between 170 volts to 250 volts with output voltage stabilized at 230 volts with accuracy of +/- 2.5% of capacity 1 KVA. 24.03 Voltage stablizer for automatic operation single phase naturally air cooled indoor type and designed for input variatiion between 170 volts to 250 volts with output voltage stabilized at 230 volts with accuracy of +/- 2.5% of capacity 1 KVA. 24.03 Voltage stablizer for automatic operation single phase naturally air cooled indoor type and designed for input variatiion between 170 volts to 250 volts with output voltage stabilized at 230 volts with accuracy of +/- 2.5% of capacity 1 KVA. 24.03 Voltage stablizer for automatic operation single phase naturally air cooled indoor type and designed for input variatiion between 170 volts to 250 volts with output voltage stabilized at 230 volts with accuracy of +/- 2.5% of capacity 1 KVA. 24.03 Voltage stablizer for automatic operation single phase naturally air cooled indoor type and designed for input variatiion between 170 volts to 250 volts with output voltage stabilized at 230 volts with accuracy of +/- 2.5% of capacity 1 KVA. 24.03 Voltage stablizer for automatic operation single phase naturally air cooled indoor type and designed for input variatiion between 170 volts to 250 volts with output voltage stabilized at 230 volts with accuracy of +/- 2.5% of capacity 1 KVA. 24.03 Voltage stablizer for automatic operation single phase naturally air cooled indoor type and designed for input variatiion between 170 volts to 250 volts with output voltage stabilized at 230 volts with accuracy of +/- 2.5% of capacity 1 KVA. 24.03 Voltage stablizer for automatic operation single phase naturally air cooled indoor type and designed for input variatiion between 170 volts to 250 volts with output voltage stabilized at 230 volts with accuracy of +/- 2.5% of capacity 1 KVA. 24.03 Voltage stablizer for automatic operation single phase naturally air cooled indoor type and designed for input variatiion between 170 volts to 250 volts with output voltage stabilized at 230 volts with accuracy of +/- 2.5% of capacity 1 KVA. 24.03 Voltage stablizer for automatic operation single phase naturally air cooled indoor type and designed for input variatiion between 170 volts to 250 volts with output voltage stabilized at 230 volts with accuracy of +/- 2.5% of capacity 1 KVA. 24.03 Voltage stablizer for automatic operation single phase naturally air cooled indoor type and designed for input variatiion between 170 volts to 250 volts with output voltage stabilized at 230 volts with accuracy of +/- 2.5% of capacity 1 KVA. 24.03 Voltage stablizer for automatic operation single phase naturally air cooled indoor type and designed for input variatiion between 170 volts to 250 volts with output voltage stabilized at 230 volts with accuracy of +/- 2.5% of capacity 1 KVA. 24.03 Voltage stablizer for automatic operation single phase naturally air cooled indoor type and designed for input variatiion between 170 volts to 250 volts with output voltage stabilized at 230 volts with accuracy of +/- 2.5% of capacity 1 KVA. 24.03 Voltage stablizer for automatic operation single phase naturally air cooled indoor type and designed for input variatiion between 170 volts to 250 volts with output voltage stabilized at 230 volts with accuracy of +/- 2.5% of capacity 1 KVA. 24.03 Voltage stablizer for automatic operation single phase naturally air cooled indoor type and designed for input variatiion between 170 volts to 250 volts with output voltage stabilized at 230 volts with accuracy of +/- 2.5% of capacity 1 KVA. 24.03 Voltage stablizer for automatic operation single phase naturally air cooled indoor type and designed for input variatiion between 170 volts to 250 volts with output voltage stabilized at 230 volts with accuracy of +/- 2.5% of capacity 1 KVA. 24.03 Voltage stablizer for automatic operation single phase naturally air cooled indoor type and designed for input variatiion between 170 volts to 250 volts with output voltage stabilized at 230 volts with accuracy of +/- 2.5% of capacity 1 KVA. 24.03 Voltage stablizer for automatic operation single phase naturally air cooled indoor type and designed for input variatiion between 170 volts to 250 volts with output voltage stabilized at 230 volts with accuracy of +/- 2.5% of capacity 1 KVA. 24.03 Voltage stablizer for automatic operation single phase naturally air cooled indoor type and designed for input variatiion between 170 volts to 250 volts with output voltage stabilized at 230 volts with accuracy of +/- 2.5% of capacity 1 KVA. 24.03 Voltage stablizer for automatic operation single phase naturally air cooled indoor type and designed for input variatiion between 170 volts to 250 volts with output voltage stabilized at 230 volts with accuracy of +/- 2.5% of capacity 1 KVA. 24.03 Voltage stablizer for automatic operation single phase naturally air cooled indoor type and designed for input variatiion between 170 volts to 250 volts with output voltage stabilized at 230 volts with accuracy of +/- 2.5% of capacity 1 KVA. 24.03 Voltage stablizer for automatic operation single phase naturally air cooled indoor type and designed for input variatiion between 170 volts to 250 volts with output voltage stabilized at 230 volts with accuracy of +/- 2.5% of capacity 1 KVA. 24.03 0 Voltage stablizer for automatic operation single phase naturally air cooled indoor type and designed for input variatiion between 170 volts to 250 volts with output voltage stabilized at 230 volts with accuracy of +/- 2.5% of capacity 1 KVA. 24.03 0

Total in Figures Total in Figures Total in Figures Total in Figures Total in Figures Total in Figures Total in Figures Total in Figures Total in Figures Total in Figures Total in Figures Total in Figures Total in Figures Total in Figures Total in Figures Total in Figures Total in Figures Total in Figures Total in Figures Total in Figures Total in Figures Total in Figures Total in Figures Total in Figures Total in Figures Total in Figures Total in Figures Total in Figures Total in Figures Total in Figures Total in Figures Total in Figures Total in Figures Total in Figures Total in Figures Total in Figures Total in Figures Total in Figures Total in Figures Total in Figures Total in Figures Total in Figures Total in Figures Total in Figures 0 Total in Figures 0

Quoted Rate in Words Quoted Rate in Words Quoted Rate in Words Quoted Rate in Words Quoted Rate in Words Quoted Rate in Words Quoted Rate in Words Quoted Rate in Words Quoted Rate in Words Quoted Rate in Words Quoted Rate in Words Quoted Rate in Words Quoted Rate in Words Quoted Rate in Words Quoted Rate in Words Quoted Rate in Words Quoted Rate in Words Quoted Rate in Words Quoted Rate in Words Quoted Rate in Words Quoted Rate in Words Quoted Rate in Words Quoted Rate in Words Quoted Rate in Words Quoted Rate in Words Quoted Rate in Words Quoted Rate in Words Quoted Rate in Words Quoted Rate in Words Quoted Rate in Words Quoted Rate in Words Quoted Rate in Words Quoted Rate in Words Quoted Rate in Words Quoted Rate in Words Quoted Rate in Words Quoted Rate in Words Quoted Rate in Words Quoted Rate in Words Quoted Rate in Words Quoted Rate in Words Quoted Rate in Words Quoted Rate in Words Quoted Rate in Words Quoted Rate in Words

Select, Excess (+), Less (-) Less (-)

Tender Inviting Authority: CHIEF ENGINNER JAIPUR ZONE

Sch 'A' Part-XVI MISC ITEMS (TO BE QUOTED BY CONTRACTOR) Notes: (i) This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under column 5 signifies this fact only. (ii) Excavation and earth work except for the items which categorically includes for same shall be measured and paid separately under SCH A PART-XV (SITE CLEARANCE, SITE DEVELOPMENT AND EARTH WORK schedule).

Name of Work: PROVN OF DEFI OTM ACCN AT MATHURA

Sl. No. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words Represent (%) Percentage having Above/ Below ( + or - denomination) the Lump sum pre price inserted by MES

1 Lump sum price worked out by the contractor for "BUILDING WORKS" as listed in Schedule ‘A’ Part-I representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 1 LUMP SUM 86603372.38 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

2 Lump sum price worked out by the contractor for "INTERNAL WATER SUPPLY " as listed in Schedule ‘A’ Part-II representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 1 LUMP SUM 505478.81 Excess(+) Full Conversion INR 2 Construction of chamber for 100mm sluices valve item3 10 Nos

3 Lump sum price worked out by the contractor for "INTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-III representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 1 LUMP SUM 4305194.31 Excess(+) Full Conversion INR 2 Construction of chamber for 100mm sluices valve item3 10 Nos

4 Lump sum price worked out by the contractor for "ROAD, PATH, CULVERT AND HARDSTANDING" as listed in Schedule ‘A’ Part-IV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 1 LUMP SUM 9791040.89 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

5 Lump sum price worked out by the contractor for "SEWAGE DISPOSAL" as listed in Schedule ‘A’ Part-V representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 1 LUMP SUM 447702.67 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

6 Lump sum price worked out by the contractor for "AREA DRAINAGE " as listed in Schedule ‘A’ Part-VI representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 1 LUMP SUM 1825040.13 Excess(+) Full Conversion INR 2 Construction of chamber for 100mm sluices valve item3 10 Nos

7 Construction of valve pit of size 90cm x 90cm x 90cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting with two coat of synthetic enamelled paint over a coat of red oxide and grouting to PCC 1:2:4 plastering in cement morter 1:3, foundation concrete 1:3:6 including necessary earthwork complete all as specified and directed. 1 LUMP SUM 17884505.85 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

8 Lump sum price worked out by the contractor for "RAIN WATER HARVESTING " as listed in Schedule ‘A’ Part-VIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES 1 LUMP SUM 297044.67 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

9 Lump sum price worked out by the contractor for "EXTERNAL WATER SUPPLY" as listed in Schedule ‘A’ Part-IX representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES 1 LUMP SUM 384189.26 Excess(+) Full Conversion INR 2 Construction of chamber for 100mm sluices valve item3 10 Nos

10 Lump sum price worked out by the contractor for "EXTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-X representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES 1 LUMP SUM 1956222.09 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

12 Supply and fix Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switch 230V AC, Auto/Manual selector switch, MCB TPN, 32 Amps, ON/OFF indicator all prewired and making provision for fixing outgoing cables. - 01 Set complete. 1 LUMP SUM 600397.12 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

13 Lump sum price worked out by the contractor for "BOUNDARY WALL, COMPOUND WALL AND GATE " as listed in Schedule ‘A’ Part-VII" representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 1 LUMP SUM 31434.68 Excess(+) Full Conversion INR

14 Lump sum price worked out by the contractor for " HOT WATER SUPPLY " as listed in Schedule ‘A’ Part-XIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 1 LUMP SUM 57777.6 Excess(+) Full Conversion INR

15 Lump sum price worked out by the contractor for "SITE CLEARANCE, SITE DEVELOPMENT AND EARTH WORK" as listed in Schedule ‘A’ Part-XV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 1 LUMP SUM 7646528.96 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

17 Supply and fix Voltage stabilizer for automatic operation single phase naturally air cooled indoor type and designed for input variation between 170 volt to 250 volt with output voltage stabilized 230 Volt with accuracy of +/- 2.5% of capacity 5 KVA with mounting bracket complete with time delay relay.(For ACs) complete all as specified.

18 INTERNAL ELECTRIC SUPPLY

18.01 S&F of TV socket 1 module 230 volts AC make Havells and Equivalent complete all as specified and directed by Engr-in-Charge. 6 Each Excess(+) Full Conversion INR

18.02 Supply and install, testing wall termination Telephone socket RJ-11all as specified and directed by Engr in Charge. 21 Each Excess(+) Full Conversion INR

18.03 S&F blanking plates make Havells and Equivalent complete all as specified and directed. 50 Each Excess(+) Full Conversion INR

18.04 S&F of lamp holder, including 9 watt LED Bulb insulated body with back plate suitable for batten fittings and complete all as specified and directed. 66 Each Excess(+) Full Conversion INR

18.05 S & F LED bed side reading light fitting white/black powder coated housing with movable string, metalic base,complete with driver to operate on 240V AC 50 Hz, suitable for indoor application. Make Bajaj, Havells, HPL,Shakti Fixture and complete all as specified and as directed by Engr-In-Charge. 18 Each Excess(+) Full Conversion INR

18.06 S&F Sheet metal enclosure distribution board VTPN,4 way, 415 volt, double door powder coated, protection class IP-54, isolated neutral bar, mechanical impact strength IK 09 suitable for mounting MCB & /MCCB DBs confirrming to IS-13032, IS-8632,BS5484 with min 200 Amp raiting copper bus bar and grouting, fixing on wall with nut bolts wasshers proper with pcc works and complete all as specified and as directed by Engr-In-Charge. 5 Each Excess(+) Full Conversion INR

18.07 Supply and fixing of MCBs SP 63 Amps, 240 volts, 10 KA 'B' curve rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) and complete all as specified and as directed by Engr-In-Charge. Note : Make of the MCB should be the same as that of DB 6 Each Excess(+) Full Conversion INR

18.08 M&L for concealed flame proof point wiring (using red, black and green colour wires as colour coding for single phase circuit) for one light point complete with 1.50 Sqmm (nominal cross sectional area) FRLSH PVC insulated unsheathed and multistranded copper conductor cable 1100 V (ISI Marked) for main point and for continues as earth wire connected to earth dolly etc (Phase, neutral and earth wire) drawn through and including ERW steel rigid heavy duty stove enamelled conduit with all flame proof fittings and all accessories e.g pipe bend, union socket, elbow, connector, reducer, pipe hook, steel ceilling rose/sheet etc for light/fan points including cutting chases in wall and making good disturbed surfaces of walls/ceiling/floors etc by using CM(1:3) complete all as specified and as directed by Engr-In-Charge. Note: (i) Two nos of light point circuits shall be controlled by one rotaty switch/MCB fixed in existing DB. (ii) Rotary Switches, junction box, MCB shall be measured and paid separately under appropriate item of this Sch and complete all as specified and as directed by Engr-In-Charge. 6 Per Point Excess(+) Full Conversion INR

18.09 Supply and fixing (Concealed in wall) factory made flameproof DB Duly painted, 4 way dust and vermin proof including operatin Knob, cable glands, earth bar, bus bar with all accessoreis and comprising of the following including all as specified and as directed by Engr-In-Charge. (i) MCB B Curve, SPN 32 Amps, 10 KA-01 Nos (Incoming) (ii) MCB B Curve, SP 6 Amps, 10 KA-02 Nos (Outgoing). 1 Each Excess(+) Full Conversion INR

19 ROAD, PATH AND CULVERT

19.01 M&L for painting lines, dashes, arrows, letters etc on roads pavements with coloured as directed by engineer-in-charge and the like exc 10 cm wide and 1 to 2 mm thick with hot thermoplastic road marking materials with the mechanical instruments including necessary preparation of surface and mixing with glass wool complete all as specified and directed. 310 Sqm Excess(+) Full Conversion INR

19.02 S&F of Solar Stud 125x125x25 mm made from aluminium alloy and construction, solar powered by nionocrystal solar panel. Type of battery one high capacity Ni-Cd rechargable battery, view distance approx 1000 mtrs. Leds-010mm, 3 pieces each side and total six pieces are used for high brightness of different colours back up 12 hours of continious lighting at night, colour as required Red/Amber/Green complete all as specified and directed by Engr-in-charge. 85 Each Excess(+) Full Conversion INR

19.03 S&F Stainless Steel location board rectangular type of size 1.20x 0.90m , and made up of stainless steel tubes for pole of 40 mm dia framing of grade SS-304, with Stainless Steel holding support to the board with Stainless Steel ball on top of pole at 5 Ft above ground with letters, figures of any size any shape (upto 100 Nos.) sand base of high density prismatic retro reflective tape with ground of any colour of superior quality on both sides of board over 2mm thick stainless steel sheet including necessary excavation for post holes of size 30cmx30cmx60cm deep with PCC 1:2:4, Type-B-2 using 40mm graded crushed stone aggregates complete all as specified and directed. 16 Each Excess(+) Full Conversion INR

20.01 M & L for Concertina coil: 600 mm Dia/56 Loops/2.5 mm core wire. Coil Diameter: 600 mm. Type of Strip: Heavy Galvanized (IS 1730). Type of Core wire: Heavy Galvanized (IS 280-2006). Core wire Diameter: 2.50 mm Dia. Zinc Coating to Strip: Minimum 200 GSM/Sqmm. Zine Coating on wire: Minimum 275 GSM/Sqmm (IS 6745-1972 reaffirmed 2006). Tensile Strength of wire: 1400-1500 N/Sq.mm. Weight: 14.63 Kg (+ 5%). Number of Loops: 56. Blade Length: 22 mm. Barb Profile: Medium Blade (MBBT). Distance Between Barb: 35 mm. Stretchable length: 12 mtrs, Type of clip: Hardened Steelin Galvanized steel. (Wt: 8 Kg (5 % +-) per 6 to 8 Mtr ) all as speciified and directed by Engr-in- Charge. 5236 Kg Excess(+) Full Conversion INR

21 RAIN WATER HARVESTING

21.01 Construction of underground Rain water Harvesting Pit complete all as specified and directed. 2 Each Job Excess(+) Full Conversion INR

21.02 M&L for vertical bore hole by rotary cum through direct hammering(DTH) technique in any type of strata consisting of 200mm dia drill bit from GL upto a depth as directed and getting out and disposal of spoil to a distance n.exc 250m complete all as specified and directed. 105.1 RM Excess(+) Full Conversion INR

21.03 S&F PVC pipes 160mm bore of pressure rating 10 kgf/Sqm class 5 incl socket etc including lowering complete. 81.1 RM Excess(+) Full Conversion INR

21.04 S&F slotted PVC pipes 160mm bore of pressure rating 10 kgf/Sqm class 5 incl socket etc including lowering complete. 24 RM Excess(+) Full Conversion INR

22 External Water Supply

22.01 price worked out by the contractor for "AIR CONDITIONING " as listed in Schedule ‘A’ Part-XIV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 257 RM Excess(+) Full Conversion INR

22.02 Formation: - GE(W) MATHURA 1 Each Excess(+) Full Conversion INR

22.03 Construction of valve pit of size 120cm x 120cm x 120cm of double brick masonary with internal plastering from the top of surface including cover of MS sheet 3.15mm thick and angle iron 40mmx40mmx6mm with hinges and locking arrangement including painting with two coat of synthetic enamelled paint over a coat of red oxide and grouting to PCC 1:2:4 plastering in cement morter 1:3, foundation concrete 1:3:6 including necessary earthwork complete all as specified and directed. 4 Each Excess(+) Full Conversion INR

23 External Electric Supply

23.01 Supply, installation, commissioning and testing of 160 KVA Transformer naturally cooled, ONAN with external cooling tube, 11 KV/433 volts, EEL-2 of IS : 1180-2014 with amd no. 1,2,3,& 4,Total losses 570 W @50% load and 1000 W@100% load, step down outdoor type complete with standard fittings, HT 11 KV 3 Phase LT 433 Volts, 3 phase 4 wire corrugated off circuit tape links of rating + 7.5 to -7.5% @ 2.5% by means of hand operated off load tap changing gear transformer copper wound, double wound, oil immersed naturaly cooled with external cooling tubes core type delta connected on primary side (HV) and star connected on secondary side (LV) in accordance with vector symbol Dy-11 (vector group with neutral brought on secondary side (LV side) and having tapping at +/-2.5% and +/-5% on HV side to be changed by means of hand operated off load tap changer gear. The maximum temperature rise should not exceed 45 degee centigrade in oil and 55 degree centigrade in HV/LV winding ring when measured by resistance after continuous full load run in ambient temp as per IS-11171. The transformer shall be conforming to IS-1180-2014(Level-1) with standard fitting & accessories, IS-2099 for high voltage porcelian bushings and the transformer shall be comprised with the following standard fitting with off load tappings on HT side to vary secondary voltage within limit all as per IS-2026 including all necessary PCC foundation / block masonary platform as directed by OEM. 1 Each Excess(+) Full Conversion INR

23.02 Boring of holes under road, pavement, hard standing by trenchless technology using ultra sound technique and necessary machine or by using manual mechanical tools with manpower for inserting pipe of size 40 mm to 100 mm bore dia for proection of LT Cables. 50 RM Excess(+) Full Conversion INR

23.03 BOUNDARY WALL, COMPOUND WALL AND GATE 1 Each Excess(+) Full Conversion INR

23.04 Supply, laying jointing, commissioning and testing Ductile iron pipe of 100 mm bore with spigot and socket end centrifugally cast(spun) class K-7 conforming to IS-8329-2000 in any length laid in trenches complete all as specified and directed

23.05 Supply, installations, testing and commissioning factory made out door cubical type LT panel board dust and vermin proof , free standing, floor mounting type mounted on and incluidng 1:3:6 PCC foundation as requried at site and of fabricated by 3.0 mm thick SS sheet over MS 40 X 40 x 6 mm thick angle iron frame of requried type for support with double door both sides open type with necessary locking arrangement with slopped roof on top duly painted with two coats of powder coated semense gray paint complete and having separate doors inside for accomodating all incomming / out going feeders of suitable sizes all as specified and directed by Engr-in- Charge :- (Main Panel):- (a) MCCB 4 Pole 315 amps ,415 Volt of breaking capacity not less than 36 KA (Ics=100 % of Icu) with adjustable thermal release & adjustable magnetic 3.5 to 10.0 In - 01 No for incoming. (b) Copper Busbar 500 Amps current rating duly sleev insulated for set of 3 phase, 4 wire system and branch connection of suitable size of outgoing current rating of MCCBs - 01 Set. OUTGOING (c) MCCB 4 Pole 160 amps ,415 Volt of breaking capacity not less than 16 KA (Ics=100 % of Icu) with adjustable thermal setting - 01 Nos (For Adm Block ) (d) MCCB 4 Pole 100 amps ,415 Volt of breaking capacity not less than 16 KA (Ics=100 % of Icu) with adjustable thermal setting - 03 Nos (OR Living, FPO, Edn Bldg & etc) 2 Each Excess(+) Full Conversion INR

23.06 Item 23.03 (Contd/-) (e) MCCB 4 Pole 63 amps ,415 Volt of breaking capacity not less than 16 KA (Ics=100 % of Icu) with adjustable thermal setting - 01 Nos (Street Light ) (e) MCB SPN 10 Amp, 415 V, 10 KA, C-series - 02 Nos (f) Street light timer using Power contactor 32 Amps, (1-No), 3 pole, 415Volt, DIN type digital programable time switch 230V AC, Auto/Manual selector switch, MCB TPN, 32 Amps, ON/OFF indicator all prewired and making provision for fixing outgoing cables. - 01 Set complete. (g) Digital Ammeter 0-350 A with selector switch & CTs of suitable capacity - 01 set. (h) Digital volt meter 0-500 V with selector switch - 01 No. (i) LED Indicating Lamps R,Y,B - 01 Set

23.07 Supply, installations, testing and commissioning factory made out door cubical type LT panel board dust and vermin proof , free standing, floor mounting type mounted on and incluidng 1:3:6 PCC foundation as requried at site and of fabricated by 3.0 mm thick SS sheet over MS 40 X 40 x 6 mm thick angle iron frame of requried type for support with double door both sides open type with necessary locking arrangement with slopped roof on top duly painted with two coats of powder coated semense gray paint complete and having separate doors inside for accomodating all incomming / out going feeders of suitable sizes all as specified and directed by Engr-in- Charge (Panel-For Officer mess, and Adm Block) :- (a) MCCB 4 Pole 160 amps ,415 Volt of breaking capacity not less than 25 KA (Ics=100 % of Icu) with adjustable thermal release 0.8 to 1.0 & fixed magnetic type - 01 No for incoming. (b) Copper Busbar 200 Amps duly sleev insulated for set of 3 phase, 4 wire system and branch connection of suitable size of outgoing current rating of MCCBs - 01 Set. Outgoings :- (c) MCCB 100 Amp 415 V 10 KA- 01 Nos . (d) Digital Voltmeter 0-500 V with selector switch- 01 No 3 Each Excess(+) Full Conversion INR

23.08 Item 23.05 (Contd/-) (e) Digital Ammeter 0-100 A with selector switch & CTs of suitable capacity-01 set (f) LED Indicating Lamps R,Y,B (g) Street light timer using Power contactor 32 Amps, (1-NO), 3 pole, 415Volt, DIN type digital programable time switch 230V AC, Auto/Manual selector switch, MCB TPN, 32 Amps, ON/OFF indicator all prewired and making provision for fixing outgoing cables. - 01 Set complete.

23.09 Supply and fix GI pipe bracket of 1.5 m long and made out of 40 mm dia light grade pipe including MS clamp of size 25 x 4 mm - 02 Nos for holding one bracket, nut and bolt with washer duly painted with aluminium paint over one coat of primer of suitable size complete all as specified and diected. 40 Each Excess(+) Full Conversion INR

23.1 Supply and fixing of energy efficient LED street light fittings of 45 W capacity including electric connection, complete fitting including all accessories and following specification and all as directed by Engr-in-charge. (a) Lumen system efficacy of luminarie should be minimum 100 Lumen per watt. (b) Input voltage range 140 to 270 volts (c) Temp operating range minus 10°C to Plus 50°C (d) Power factor : minimum 0.95 (e) THD : Max 10% (f) CRI : More than 80 and CCT : 5700 K (g) IP rating : IP66 (h) IK rating : Minimum IK07 (j) Pressure die cast aluminium alloy for housing and heat resistant alear toughened glass (k) Built in potted LED driver of the make as of the luminaire. (l) LED driver should be complete with all protection viz open/short circuit protection, over voltage protection, all as per standard design of manufacturer. (m) Surge protection 10 kV (inbuilt + extended) (n) Lens:- High sfficiency wide angle lens (o) BIS approved fixtures and driver (p) Rated life time : 50000 burning hrs (Average 10 to 12 hrs daily) 40 Each Excess(+) Full Conversion INR

23.11 Supply and fixing junction box complete with fixing accessories and following specification and all as directed by Engr-in-charge. (a) Junction box should be insulated and made out of polycarbonate with glass fiber re-inforced material. (b) Size Min 210 mm x 155 mm x 92 mm. (c) IP protection : IP 66 in accordance with IEC 60529. (d) Internally embedded gasket of plyurethane. (e) Junction Box must meet the provision laid down in IEC 60998-1, IEC-60670-22, IEC-60670-22, IEC-60670-2 to 5 a 40 Each Excess(+) Full Conversion INR

23.12 nd color according to RAL 9011. (f) The manufacture of junction box shall submit a copy of IEC cerfigicate. (g) Junction box shall be fire retardant and self extigushing in accordance with IEC-60695-2 to 11, DIN VDE 0304 part -3, UL94 V-2 flammability standard. It should be tested at Glove Wire test for 960C. (h) The degree of protection of enclosure against mechanical load shall be in accordance with E N 50298 for IK08. (j) Junction box shall be 4 pole complete with single pole MCB 'C' curve of 6 AMP, rating. 4 Each Excess(+) Full Conversion INR

23.13 M&L Decorative LED post top lantern (PTL) luminior with die cast aluminium spigot, spun aluminium powder coated top cover clear/opal acralic difusser LED light fitting of 25 watt including LED lamp complete all as specified & directed. 440 RM Excess(+) Full Conversion INR

23.14 Supply and connecting three core cord flexible wire, copper conductor multistranded, PVC insulated and overall PVC sheathed of size 1.5 Sqmm 1100 Volt , draw through LT steel tubular poles for connection to street light from junction box as directed by Engr- in- Charge. 44 Each Excess(+) Full Conversion INR

23.15 Cable route indicator, duly engraved with 'LT CABLE 1100 VOLT' on cast iron round plate 150 mm dia with provision of 500 mm long (minimum) single leg/stand of flat iron 40 x 5 mm, welded/riveted on back side of plate, fixed and grouted in position with PCC 1:3:6 type C-1, block of suitable size complete. 6 Each Excess(+) Full Conversion INR

23.16 Providing cement concrete type B1 (1;2;4) (20 mm graded aggregate)in precast posts for cable route indicator of size 500x300x100 mm rounded top as directed and grouting in ground with PCC (1;3;6) block of size 350mmx150mmx200mm including 10 mm thick plastering all around of exposed surfaces of post above ground with CM (1:4) and applying two coats cement base paint on plastered surface and writing with synthetic enamel paint in black colour in suitable size like HT Cable , complete all as specified and directed by Engr-in-Charge. 1500 Each Excess(+) Full Conversion INR

23.17 M&L for Factory made unreinforced precast concrete cable covers conforming to IS:5820, class HV type 1 size 300x180x40 mm for cable protection complete all as specified 16500 Each Excess(+) Full Conversion INR

23.18 Factory made unreinforced precast concrete cable covers conforming to IS:5820, class LV type 1 size 250x150x40 mm for cable protection complete all as specified. 16 Each Excess(+) Full Conversion INR

23.19 Supply and fix fully cast aluminium body finished with polyurethane paint (with prior treatment) bollard of length 736 mm & circular base diameter of 177 mm and max diameter of leg of bollard 127 mm surmounted with fully cast aluminium body finished with PU paint with acrylic window cover B22 brass holder including OEM recommended PCC Foundation provided with aluminium cover with 20 Watt warm white Led bulb fixed/grouted in PCC base of size 45x45x60 cm with nut and bolts alongwith all as directed by Engr-in-Charge 320 RM Excess(+) Full Conversion INR

23.2 Supply and laying in replacement PVC copper cable 3 core 1.5 sqmm with pvc pipe laid inopen with the help of saddles of suitable size alongwith nut bolts all as specified and directed 1 Each Excess(+) Full Conversion INR

24 Lump sum price worked out by the contractor for " SUMMER APPLIANCES" as listed in Schedule ‘A’ Part-XII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES

24.01 SUMMER APPLIANCES 2 Each Excess(+) Full Conversion INR

24.02 Supply and fix single door refrigerator electric driven single phase 230 volts, AC 50 Hz,of capacity 195 litre or next available higher capacity with BEE approved, 5 star rating with inbuilt stablizer complete including electric connection complete all as specified . 46 Each Excess(+) Full Conversion INR

24.03 Desert Cooler of size 26 x 26 x 33 inch or next available higher size having nominal air flow capacity 4000 cubic metre per hour single phase 240 volts 50 hz made out of plain GI sheet 18 SWG & side panels of 22 SWG , and having water storage capacity is min 80 Ltr and having a provision of float valve fixed on directed location and connecting complete all as specified . 11 Each Excess(+) Full Conversion INR

25 Voltage stablizer for automatic operation single phase naturally air cooled indoor type and designed for input variatiion between 170 volts to 250 volts with output voltage stabilized at 230 volts with accuracy of +/- 2.5% of capacity 1 KVA.

25.01 AIR CONDITIONING 1 Each Excess(+) Full Conversion INR

25.02 Supply and fix air cooled split unit air conditioner inverter type BEE 5 Star rated of capacity 2 Tonne single phase 230 Volt 50 Hz AC indoor & outdoor unit complete with cordless remote & mounted on brackets for outdoor unit including provision of waste water pipe from indoor unit to outside the building complete all as specified. 14 Each Excess(+) Full Conversion INR

25.03 Supply and fix air cooled split unit air conditioner inverter type BEE 5 Star rated of capacity 1.5 Tonne single phase 230 Volt 50 Hz AC indoor & outdoor unit complete with cordless remote & mounted on brackets for outdoor unit including provision of waste water pipe from indoor unit to outside the building complete all as specified. 15 Each Excess(+) Full Conversion INR

Total in Figures 4 Construction of chamber for 100mm sluice plates item5 10 Nos

Quoted Rate in Figures Select

Quoted Rate in Words