REPAIR MAINTENANCE OF CERTAIN BR DAY TO DAY MAINTENANCE WORK IN OLD NAVY NAGAR AND CERTAIN REPAIRS AND MAINTENANCE TO CARPENTER WORK PLUMBING FITTINGS AND VARIOUS BR SERVICES IN MES BLOCK AND CERTAIN BR REPAIR TO OTM ACCOMMODATION AT OLD NAVY NAGA

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

S & F Non Skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) size 400x 400 mm area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bedding layer in CM 1:4 complete all as specified and directed by Engg-In-Charge

S&F Glazed colour ceramic tiles in vertical surfaces 300 x 200x 7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick rendering as backing layer in CM 1:4 complete

M&L glazed ceramic tiles in vertical surface 450x350x 7 mm thick set and jointed in neat cement slurry over and including 15 mm thick cement plaster in cement mortar 1:4 and pointed in white or colour cement to match complete all as specified and directed by Engr-in-charge. (Note : The rates include the cost of 15 mm thick plastering ).

Material & labour for non skid coloured jointed free ceramic tiles of size 600mmx600mmx10mm thick in floors over and including 20mm thick screed bed in cement mortar (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed by Engg-In-Charge.

S & F in repairs cupboard/drawer pulls, 3 screw plate with fixed dished pull, 80 mm to 100mm long handle brass type.

M&L in repair aluminium powder coated drapery rod of 20 mm dia including curtain rings (minimum 6 Nos for each curtain rod) complete (Make : as approved by GE)

S&F aluminium powder coated fancy type domes cum bracket (20 mm dia) fixed to both ends of the drapery rod and wall complete all as specified and directed (Make : as approved by GE)

Demolition of cement Concrete unreinforced in ground floors and pavings n exc 15 cm thickness (below or above ground level)

M & L Cement concrete type B-1, 1:2:4 (20mm graded aggregate) 40 mm thk in flooring, all as speciifed and directed

S &F in repairs Cast iron nahani trap 100 mm dia with grating including jointing to waste pipe fixed in cement concrete type B1(1:2:4)

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings

M&L pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified including making grooves of minimum 50mm into brick walling and inserting the sheets into these grooves including working platform/scaffolding) Complete all as specified and as directed by Engr-in-Charge

Taking down cement plaster of any discription including racking out joints hacking for key scrubbing down with water & removed debrises out MD land.

M&L Plastering on concrete surfaces of ceiling, beams, lintels, walls etc, 20mm thick (10+10mm)in two coats in CM (1:4) , mixed with water proofing compound on fair faces of brick work or concrete surfaces, finished fair & even without using extra cement complete all as specified (WPC to be mixed in setting coat only and shall be measured and paid separately)

M&L rendering 15mm thick in CM (1:6) on wall finished even and fair without using extra cement as in patches all as specified and directed by Engr -in- Charge.

All as above but 10mm thick in CM (1:3) in ceilling

M & L applying one coat of Rust remover and rust passivator on exposed reinforcement surfaces at any height all as specified and dirceted. Make :- Pidiite fosroc or equivalent

M&L preparation of new undecorated surfaces of walls,soffits & fascias of chajjas etc and applying two coats of weather proof Acrylic based paint(100% Acrylic) exterior grade over a coat of primer complete all as per manufacturers instructions all as specified & directed by Engineer-in-charge.

M&L for preparing newly plastered surfaces of wall and applying two coats of oil emulsion distemper over a coat of primer all as specified and as directed

M&L applying three coats of white wash on new plastered surfaces including preparation of surfaces as in ceiling all as specified.

M&L applying one coat of white wash on old plastered surfaces including preparation of surfaces as in wall all as specified.

All as per item No 25 above but on ceiling

M&L applying one coat of oil emulsion distemper white or tinted on wall after necessary preparation of surface including removal of swelled popup paint, cracks and applying wall care putty to make the surface even complete all as specified.

M&L applying two coats of oil emulsion distemper white or tinted on wall after necessary preparation of surface including removal of swelled popup paint, cracks and applying wall care putty to make the surface even complete all as specified.

M&L preparation of old undecorated surfaces of walls,soffits & fascias of chajjas etc and applying one coat of weather proof Acrylic based paint(100% Acrylic) exterior grade over a coat of primer complete all as per manufacturers instructions all as specified & directed by Engineer-in-charge.

M&L applying one coat of synthetic enamel paint including preparation of old wooden surfaces over 10cm width/girth all as specified.

M&L preparation of old painted surfaces over 10cm width or girth and applying one coat of synthetic enamel paint on steel surfaces all as specified

S & F in repairs Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples to wooden/aluminium frames complete all as directed and as specified

S&F in repair 5.5 mm thick frosted glass ordinary quality in square n.exc 0.50 sqm each fixed to aluminium window frame including hacking out broken glass panes of any description from wooden frames or aluminium fixed with beads.

S&F in repair 100mm stainless steel Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed.

S&F in repair 150mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F in repair 150mm long aluminium anodised barrel tower bolts of extruded section.

S&F in repair 300mm long aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clip of sheet,cast or extruded section and fixing bolt of extruded section or cast aluminium alloy and fixed.

S&F in repair 140mm long Floor door stopper of brass body and tongue with hard drawn steel spring , fixed in floor complete all as specified and directed.

Resecuring or easing & adjusting of shutters, without taking down but exc 1 sq. m and n exc 2 sq. m each

Resecuring or easing & adjusting shutters , without taking down upto 1 sq. m each

Taking down Chowkhats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sq. m each complete all as specified.

S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing

S & F Factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

Taking down shutters of any description exceeding 1 Sq. M and not exc 2Sq.M each at any storey of building complete all as specified and directed.

S&F 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

Suppling and fixing 2nd class hardwood 35mm thick skelton shutters, open rebated and prepared to receive wire mesh edge of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing mesh etc, sizes of members of shutters as specified in SSR complete all as specified and directed by Engg-In- Charge.

Supply and fixing 2nd class hardwood bullnosed splayed, chemfered or rounded on edge fillets rectangular in section, sectional area exc 6 but n. exc 13 Sqcm fixed in repairs fixed with nails complete all as specified and directed by Engg-In- Charge

All as per item No 44 above but sectional area exc 13 sq cm and not exc 25 sq cm complete all as specified and directed by Engg-In- Charge .

S & F Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples to wooden/aluminium frames complete all as directed and as specified

S&F 100mm stainless steel Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed.

S&F 125mm stainless steel Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed.

S&F 150mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

All as per item No 49 above but 125mm.

S&F 150mm long aluminium anodised barrel tower bolts of extruded section.

All as per item No 51 above but 100mm.

S&F 300mm long aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clip of sheet,cast or extruded section and fixing bolt of extruded section or cast aluminium alloy and fixed.

S&F 140mm long Floor door stopper of brass body and tongue with hard drawn steel spring , fixed in floor complete all as specified and directed.

M & L preparing new wood or wooden surfaces over 10 cm of width or girth and applying two coats of synthetic enamel paint over a coat of pink primer upto 9 storey

Demolition of concrete of any description and in any position not otherwise specifically provided for including chaina mozaic, WC etc. removing the debris from MD complete upto 4 storey.

M&L for roughening the surfaces of old cement concrete floor by picking, cleaning and washing down with water to remove dust etc. rendering 15 mm thick in CM 1:3 mixed with water proofing compound and applying two coats of hot bitumen 85/25 grade @ 1.70 Kg/Sqm over vertical sides of sunken floors. (Note : WPC shall be measured and paid seperately)

M&L cement concrete 1:7:12 with with 40mm graded stone coarse aggregate in sunken floor all as specified and directed

S & F in repairs Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe ) including trap set in concrete bedding.

S & F 100 mm bore cast iron 'P' or 'S' trap fixed complete with M-SEAL joint to cast iron 100 mm bore pipe duly fixed in position in repairs complete including closing the wall opening in cm 1:3 or ad directed

M&L 32 mm galvanised tubing medium grade as in spout pipe each 50 cm long, cutting to shape as required, cutting through wall of any thickness, fixing in PCC 1:2:4 tpe B-1 making god the damaged portion by rendering in CM (1:4) and finished the surface to match the existing surface complete all as specified.

Grubbing up and uprootinng of trees / plants from external walls of bldgs pouring muratic acid for burning risidual roots in any. Racking out the dead roots from plants / concrete joints upto its penetrated portion and filling with PCC (1:2:4) 12.5 mm graded aggregate and finishing the surface with 15mm rendering in CM (1:4) including necessary hanging arrangement complete all as specified and as directed.

M & L for one coat of floor paint on old surfaces of chequered tiles/paver blocks in floor including brooming and cleaing the surfaces with water complete all as directed.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed

Material and labour for Granite(of any type) 18-20mm thick slab laid on floor machine cut, bedded & jointed with grey cement slurry & pointed with white cement with admixture of pigment to match the shade of granite stone over 15 mm thick screed bed in cement mortar (1:6) including grinding & polishing complete. complete all as specified and as directed

All as per item No 65 above but on wall skirting /dado over 12-15 mm thick Cement mortar (1:4) complete all as specified and as directed

Rounding to edges of stone slabs (kota/granite etc) one edge, such as in steps, cooking platform, and other similar situations

Extra for forming grooves over granite or kota stone slab as in staircase complete all as specified and as directed

Supply and fixing in repair of 04 pieces pulley operated Cloths Drying system casting of Aluminium pipe of outer dia 22 mm inner dia 19.8 mm and channel pair of length 2.00 mtr with pulley made up of devil mounted and fixed with self tapping screw. Rope will be HDPE double core of 4 mm with rope Guide at locking system to hide rope. Channel to be dia of minimum weight of pipe shall not be less than 0.20 kg/Rm and maximum weight of Pipe in one unit not less than 2 kg. Weight of rope shall be not less than the 550 gms / mtrs including taking down old unserviceable cloth hanger complete all as directed. Make : As per sample approved by GE

Taking down and refixing PVC profile suitable for 275 ltrs loft tank including fixing of aluminium channel around the profile complete all as specified and directed.

M & L for Cub-boards shutters and shelf made with 19mm thick Block boards, grade 2 quality, interior grade, decorative type with decorative face veneer on one face, fixed with screws to timber frame-work including 6mm teakwood lipping complete all as specified and directed upto 12 storey of bldg.

S & F Continuous (Piano) hinges, mild steel, bright finished or electro galvanized, width of flaps (When open) 30 mm at any storey of building

M & L for Writing letters of figures (Block, Roman, Italic or Indian) exc 60 cm but not exc 90 cm high using two coats of Acrylic paint exterior grade (100%) acrylic over a coat of primer including preparation of surfaces of walls etc specified on external surfaces. (letter writing shall be done at isolated locations at height not more than 10 m above Ground level)

S & F Non Skid rectified ceramic floor tiles 8 to 9 mm thick of size 600x 600 mm as in floors etc approved colour set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15 mm thick cement screed base (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete (Note : (i) The rate includes the cost of cement screed bed

S&F 125 mm extruded aluminium handles, fabricated type anodised fixed in repairs.

S&F 100mm aluminium anodised barrel tower bolts of extruded section fixed in repairs.

Cutting holes in brick walls but in brick walls built in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement lime mortar in cm 1:2;4 type B-1 not exceeding half brick as required depth of embedded portion of holdfasts

M & L MS works in holdfast made of fe -290 of length

S & F Aluminium handles, cast type, anodised of length 100 mm

Taking down shutters exc 2.00 sqm each removing to or from store.

S & F 30 mm thick flush shutters, solid core construction, with particle board core complete all as specified.

Supply and fixing Marine ply 18mm thick as in cupboard shutter including fixed with piano hinges complete all as specified and directed by Engg-In- Charge.

M&L for welded mesh n.exc 4kg/ Sqm including beading, fillets, nails including dismantling old unserviceable mesh complete all as specified and as directed by Engg-In- Charge

S & F in SS butt hinges 150 mm size

Hacking out broken glass panes of any description from wooden frames fixed with beads.

S&F 4mm thick pin headed type ordinary quality in square n.exc 0.50 sqm each fixed to aluminium window frame.

Complete removal of existing treatment of wall by washing, rubbing down complete

S & F in repairs Pillar taps of 15 mm dia , cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed.

S & F pvc connectors of 15 mm size with PTMT nuts of length 600 mm length

S & Fin repairs PVC waste pipe of 32 mm dia 800 mm length

S & F in repairs CP grating of size 100 mm

S & F in repairs 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets in repairs

S & F in repairs Stainless sink coupling of external 110mm dia along with necessary fittings.

S & F in repairs Vitreous China wash basin, white, flat back, size 550 x 400 mm excluding water taps waste chain plugs and porcelian stopper but including brackets

S&F CP brass pillar tap 15mm, screwed down high pressure fancy type.

Taking down & refixing PVC SWR 110/150 mm bore pipes single socketed in any lengths & to any height with rubber ring joints fixed to wall complete all as specified and directed.

Taking down CI soil/ waste/ vent/ pipes including all fittings like shoes bends swan necks etc of any dia all as specified and as directed. ( Inclusive of scaffolding of any hight )

S & F CI soil/ waste/ vent pipe s in any length with ears 100mm bore ISI marked (sand cast) in any length with cement joints fixed to walls complete all as specified and directed

S & F CI bends or tee( any radius ) for soil / waste pipes 100 mm bore diminshing pieces or tapers on walls complete all as specified.

S & F CI branch pieces single (equal or unequal ) ordinary or inverted (spigot or socket type) wirh parallel branches for 100mm bore pipe all as specified and directed

Supply only water proofing compound Fosroc Dr Fixit or equivalent

SATYANARAYAN CONSTRUCTION

M/s. MAYUR ENTERPRISES

Shetty Construction Co

S S ENTERPRISES

SHREE JAGDISH FURNITURE CO.

BOB ENTERPRISES