VILLAGE DASAUNDA SINGH WALA BLOCK MALERKOTLA2 DISTRICT SANGRUR PRWSSIP Component 2ai

Amount

Component -1

Providing and installing Testing & Commissioning of One No. Electrically driven Submersible Pumping set of reputed make capable of delivering 545 LPM against a head of 80 mtr (17.50 BHP) along with including M.S. Column Pipe of suitable size 80mm=50 mtr (in 3 mtr lengths each with flanges, screwed and welded on both sides) rubber gaskets, nuts and bolts submersible cable 4mm2x 100 mtr. (reputed make) complete in all respect as per standard Specifications.

Providing & Fixing Electric Panel Board (ISI marked) Consisting of electric appliances such as Automatic star Delta Push Button with oil immersed starter, Main switch, VM ampere Meter, E LCB, shunt capacitor, single phase Preconter, including lamps, Kit-kat etc. Complete in all respect.

Repair of Pump Chamber

White washing scraping inside of Pump Chamber as per CSR item no. 8.31 (a)

Scraping of snowcem robbiacem etc. (as per CSR item no. 8.31 (a)

White washing 2 coats inside of Pump Chamber

Finsing Wall with exiterior decorative cement based paint such as snowcem robbiacem etc. on new work in two coats to give even shade.

Applying Pink Primer or-aluminium priming coat including preparation of surface With special quality paint

Painting two coats excluding priming coat with ready mixed paint in all shades on old wood work With special quality paint.

Preparation of plastered surfaces for distempering including surface, applying filling with approved quality filler consisting of plaster of Paris and chalk mitti including finishing the surface to the required finish complete. Inside pump Chamber.

Distempering with dry distemper of approved manufacture two coats over one priming coat to give an even shade

Applying priming coat with methal primer on new steel or iron work incluing preparation of surface and Painting two coats with ready mixed paint for metallic surfaces in all shades on steel or iron work with special quality paint.

Providing and fixing of ceiling fan of reputed make such as Crompton or equivalent

Providing and fixing of electric tube set of reputed make

Painting Transparency wall & by laws of GPWSC.

Repair of OHSR

Repair of Expansion Joint. Size 100 mm i/d complete in all respects

Painting of OHSR pipes including cost of labour & material complete in all respects.

Painting of OHSR stair case railing and pickets including cost of labour & material complete in all respects.

P/F OHSR Jali complete in all respects.

Construction of brick masonry over flow houdi of size 1.20 x 1.20 x 1.20 m for OHSR complete in all respects as per analysis A-21

Repair of Water Works

Providing & fixing G.I. Barbed wire 3 ply fencing around the head works site in three rows complete in all respects including cost of winding wire & aluminum painting complete in all respects

Providing & fixing angle iron pickets with angle 40mm x40mm x 6mm including cost of concrete block & painting complete in all respects as per standard Drawing D-8 & (as per Analysis A-6).

Providing & fixing D.Hook complete with MS Bolts size 300mm x 18mm as per standard Drawing D-7 & Analysis A-7

Conglomerate floor 40mm cement concrete topping 1:2:4 For foot path 15 mtr

Solar System

Providing, Fixing, Installing, Commissioning, Solar Panel Energy System (Monocrystalline) for amount of electric power required for running electric motor and other appliances such as fan, tube, Bulb etc in water works site. including Bi-directional meter and inverter of suitable capaity as per guidelines issued by PEDA complete in all respects. 1. Dasaunda Singh Wala = 13.77 KW

Detail of Repair and minor Replacement of existing pipe line

Provision for making new connection with exit pipe line as per analysis A-20

Thrust bearing through out the pully/ road or any other obstacle at the depth of 1 mtr. to pass pipe

Automated water controller switch to start or stop the pump based on water reservoir level.

Component -2

Providing proposed water connection on existing pipe line to house hold up to wall with providing, laying jointing, testing G.I pipe lines 15mm i/d=2.50 mtr (as per CSR 28.36 (a)) & MDPE pipe 15mm i/d = 2 mtr including cost of specials such as tees, bends, sockets, elbow etc. cutting, threading, and testing in trenches in the ground and ISI marked 15mm i/d GM ferrule as per IS: 2692 and 3'' i/d clamp with c.i. bib cock 15mm i/d as per IS:210 with stainless steel spindle of approvel make as per CSR 30.65 (b) complete.

Component -3

Providing, Laying, fixing & jointing of PVC Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing including excavation & back filling complete as per specifications for more than 3 mtr street width included excavation.

PVC pipe 63mm o/d 6Kg/sqcm

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze (gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing & cost of Nut, Bolt & insertion sheet, all carriage complete (with the approval of Engineer - in - charge)

Construction of masonry sluice valve chamber excluding Sluice valve cover as per standard design & drawings of public health department 1No. With each of Size 0.6m x 0.6m

Construction of masonry sluice valve chamber excluding Sluice valve cover as per standard design & drawings of public health department 1No. With each of Size 0.9m x 0.9m

Dismantling brick or flagged stone flooring without concrete base and relaying of dry brick on edge paving with a dismantled bricks including sand grouting.

PVC pipe 63 mm o/d

Dismantling of cement concrete 80mm thick cement concrete 1:2:4 over 100mm thick C.C. 1:8:16 and making good the same to its original condition complete in all respects as per analysis A-25

PVC pipe 63 mm o/d

Providing proposed water connection to house hold up to wall with providing, laying jointing, testing G.I pipe lines 15mm i/d=2.50 mtr (as per CSR 28.36 (a)) & MDPE pipe 15mm i/d = 2 mtr including cost of specials such as tees, bends, sockets, elbow etc. cutting, threading, and testing in trenches in the ground and ISI marked 15mm i/d GM ferrule as per IS: 2692 and 3'' i/d clamp with c.i. bib cock 15mm i/d as per IS:210 with stainless steel spindle of approvel make as per CSR 30.65 (b) complete.

Providing & fixing MS Sign Board as per standard size of DWSS as per analysis A-24

Cost of Component-4 (Operation and maintenance)

Provision for sodium chloride for disinfection of water Complete in all respect.

Credit of old machinery complete in all respect

M/S Rakesh Kumar Govt. Contractor Dhuri