Jalgaon Indl.Area M and R to WSS Annual Maintenance of VT Pumps motor and panel board at jackwell and WTP Skegaon GSR

Amount

Dismantling & Overhauling of Vertical turbine pumps from the position for all suspended length (from bell mouth to discharge head), cleaning, checking, aligning, assembling i.e refitting, commissioning, with trial run on No load & full load for at least 30 minutes including replacement of spare parts, fasteners (which shall be made available by MIDC) at free of cost at site of work) etc complete as per site requirement 200 HP

Fabrication of spares for the pumping machinery suitable to match with the existing fitments & as per actual site conditions including cost of material, salvage, machining, labour, taxes & duties, incidentals, overheads, packing & forwarding etc. complete Cost iron Housing or Casing

Stainless Steel -410

Gun Metal Bush

Neoprene rubber

Supply of Motor stool suitable for Jyoti Make motor frame size CVD-280-200 HP and WPIL VT pump Model C-18 TC/2 stage

Supplying and erecting S.S. nut-bolts full threaded of size M20 x 75 mm long with nut & washer for coloum pipe.

Providing white gland packing of 12 mm, 16 mm thickness for raw water & pure water pumps

Supply of impeller for WPIL VT Pump model GM16TC/5 stage

Checking the throughness of the shafts of pumps while doing the maintenance work of the pumps including taking the same to workshop, checking it on machine for throughness, repairing/ removing the outness if required and then again shifting the same to site etc complete including labours and materials etc complete.

Providing good quality white rubber packing of 3.00 mm thickness as per the requirement for assembling of pump

Supply of bowl for WPIL VT Pump model-GM16TC-5 stage

Supply of discharge case for WPIL VT pump model -C18TC/2 stage

Supply of Bearing Retainer for WPIL VT Pump model- C18TC-2 stage

Servicing and overhauling of motors, including removing from location, dismantling cleaning the winding, drying, applying, varnish, baking, changing the bearing if necessary (bearing will be supplied by MIDC) greasing the bearing, assembling, and giving satisfactory trials on No load and full load etc. 30 HP

Rewinding and repairs of Squirrel cage induction motors, 440 V, 3 phase, 50 cycles/sec. 1500 RPM with B class insulation including baking, varnishing, painting etc. (The scrap of winding material shall be retained by rewinder.) 200 HP

Supplying and erecting power contactor C&S make LC1FDP115A

Supplying and erecting power contactor C&S make LC1FDP400A

Supplying and erecting thermal overlaod relay 200-315 A for 200 HP motor C&S make type LR1-F315

Supplying and erecting electronic timer ST 100 for starter 240/360/415 V, 50 Hz for 3-30 seconds, Cat No. ST 80328OOOO

Supplying and erecting SKF make bearing for 25 HP, 200 HP & 300 HP VT pump motor including dismantling of motor, removing the damage bearing from motor and providing new bearing and giving satisfactory testing including tools & plant and labour etc. complete. (Size subject to old sample) SKF Bearing 6318/C3

SKF Bearing 29326 E

SKF Bearing 6320/C3

SKF Bearing 7322 BECBM

LT - MCCBs (SW-MCCB) Providing & erecting 3 Pole MCCB, 415V, up to 100A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact. MCCB with phase barriers on both sides, insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-MCCB

Providing & erecting 3 Pole MCCB 415V, 400A, rated short-circuit breaking capacity 36 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact. MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure /panel as per specification no. SW-MCCB

LT Cables (Copper) (CB-LT/CU) Supplying, erecting & terminating FR XLPE insulated unarmoured cable 1100 V. 1 core 50 sq. mm. copper conductor complete erected with provided lugs, laid in provided control panel /distribution boards / pipe as per specification no. CB-LT/CU

Cable Joints & End Termination Kits (HT Cables) (CB-JT/HT) Providing and erecting Heat shrinkable indoor termination kit for 11 KV (E) XLPE HT cable 3x240 to 300 sq. mm. with necessary material as per specification no. CB-JT/HT

Supplying and erecting bank of All Polypropylene capacitors with the standard capacities of 1,2,3,5,7,12.5,15,20 and 25 KVAR units of power factor correction for operation on 3 phase, 50 Hz, 400 V+/- 10% with externally discharging resistances, earthing terminals and built on angle iron or channel iron frame work and provided with terminal cover box complete erected and tested.

Cat (B) - Buy Back Items

Stainless Steel - 410

Cast Iron

Gun Metal

Shree Sai Enterprises (BID ID -6814944)

Kevla Engineering (BID ID -6815439)