Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.2 CrAdmitted-Finance | ₹1.2 Cr | L1 | Admitted-Finance |
| 2 | L2₹1.3 Cr+₹2.2 L (1.79%)Admitted-Finance | ₹1.3 Cr+₹2.2 L (1.79%) | L2 | Admitted-Finance |
| 3 | Rejected-Technical | - | - | Rejected-Technical Not Admitted |
| 4 | Rejected-Technical | - | - | Rejected-Technical Not Admitted |
| Sl No | Description | Qty | Unit | VIJAYNATH ROOF AND WALL CLADDING SYSTEMS PVT LTD L1 | Rishonn & Reyansh Private Limited L2 |
|---|---|---|---|---|---|
| 1.00 | DOUBLE SKIN INSULATED ALUMINIUM STANDING SEAM ROOF SYSTEM: Design, Supply and Fixing of Aluminium 65/400 Standing Seam Roofing System (KALZIP (Kalzip India Pvt. Ltd.) / Kingspan (Kingspan Jindal Pvt. Ltd.) / BEMO (Bemo System GmbH)): Design, supply, fabrication and fixing of Aluminium 65/400 straight profile standing seam roofing system manufactured from aluminium alloy AA 3004 H44 (AlMn1Mg1) conforming to BS EN 1396:2015, minimum 0.9 mm thick with stucco finish on the exposed surface. The profile shall be self-supported, non-penetrative type with three (3) mini ribs and complete with all necessary clips, fasteners, flashings and accessories for a weather-tight installation. The roof build-up over the existing liner sheet shall comprise, from top to bottom, of : Aluminium 65/400 standing seam roofing sheets manufactured from aluminium alloy AA 3004 (AlMn1Mg1), minimum 0.9 mm thick with stucco finish; Aluminium ST clips manufactured from aluminium alloy AA 6061-T5 of suitable height and fixed using SS 304 fasteners; 100 mm thick Rockwool insulation of minimum 60 kg/m3 density ; galvanised steel top hat sections of minimum 2.0 mm thickness, minimum yield strength of 245 MPa and galvanization of 275 GSM, fixed over continuous top hats using carbon steel self-drilling screws at maximum 900 mm c/c; continuous galvanised steel top hat sections of minimum 3.0 mm thickness, minimum yield strength of 245 MPa and galvanization of 275 GSM, installed over the existing liner sheet along the purlin direction and fixed using carbon steel self-drilling screws at maximum 600 mm c/c; a single-layer polyethylene reinforced vapour control membrane (VCL) reinforced with monofilament scrim having tensile strength of 150-170 N/sq.mm (MD) and weight of 150-180 GSM : and the existing trapezoidal liner sheet. The complete roofing system shall be supplied and installed in accordance with the manufacturer's recommendations and project specifications. | 900 | sqm | 12,245 ₹1,10,20,500 Lowest | 12,475 ₹1,12,27,500 |
| 2.00 | 0.9 MM THICK NON INSULATED ALUMINIUM FLASHING FOR ROOF : Supply and fixing flashing manufactured from aluminium alloy AA 3004 / 3005 (AlMn1mg1) as specified in BS EN 1396: 2015 minimum material thickness of 0.9 mm of same finish as Top Sheet. Max width up to 578 mm. | 70 | metre | 2,300 ₹1,61,000 Lowest | 2,350 ₹1,64,500 |
| 3.00 | WIND CLAMPS : Supply and installation of Wind Clamp for perimeter region of the roof as an additional safety requirement over and above the design requirement. Wind clamps made of aluminium alloy AA6082/AA6061 (Mill finish) of size 100mm long at required intervals along the length with fastener along the seam at every clip location. Finish: Mill Finsh | 2,000 | each | 575 ₹11,50,000 Lowest | 580 ₹11,60,000 |
Tender Value
₹1.1 Cr
EMD Value
₹3.4 L
Closing Date
7 Aug 2026, 6:00 pmClosed
AGM (Engg.-Civil)
Airports Authority of India, Chhatrapati Sambhajinagar Airport, Chhatrapati Sambhajinagar - 431 007
Replacement of damaged portion of double skin roofing at Chhatrapati Sambhajinagar Airport
2026_AAI_283357_1
AAI/CSN/E-C/W-164/2026
Open Tender
Civil Works
Item Rate
120 days
Chhatrapati Sambhajinagar Airport
Please refer Tender documents.
4 documents required · 4 mandatory
₹1,180
₹3.4 L
21 Aug 2026
17 Jul 2026
10 Aug 2026
18 Jul 2026
7 Aug 2026
18 Jul 2026
18 Jul 2026 - 22 Jul 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | DOUBLE SKIN INSULATED ALUMINIUM STANDING SEAM ROOF SYSTEM: Design, Supply and Fixing of Aluminium 65/400 Standing Seam Roofing System (KALZIP (Kalzip India Pvt. Ltd.) / Kingspan (Kingspan Jindal Pvt. Ltd.) / BEMO (Bemo System GmbH)): Design, supply, fabrication and fixing of Aluminium 65/400 straight profile standing seam roofing system manufactured from aluminium alloy AA 3004 H44 (AlMn1Mg1) conforming to BS EN 1396:2015, minimum 0.9 mm thick with stucco finish on the exposed surface. The profile shall be self-supported, non-penetrative type with three (3) mini ribs and complete with all necessary clips, fasteners, flashings and accessories for a weather-tight installation. The roof build-up over the existing liner sheet shall comprise, from top to bottom, of : Aluminium 65/400 standing seam roofing sheets manufactured from aluminium alloy AA 3004 (AlMn1Mg1), minimum 0.9 mm thick with stucco finish; Aluminium ST clips manufactured from aluminium alloy AA 6061-T5 of suitable height and fixed using SS 304 fasteners; 100 mm thick Rockwool insulation of minimum 60 kg/m3 density ; galvanised steel top hat sections of minimum 2.0 mm thickness, minimum yield strength of 245 MPa and galvanization of 275 GSM, fixed over continuous top hats using carbon steel self-drilling screws at maximum 900 mm c/c; continuous galvanised steel top hat sections of minimum 3.0 mm thickness, minimum yield strength of 245 MPa and galvanization of 275 GSM, installed over the existing liner sheet along the purlin direction and fixed using carbon steel self-drilling screws at maximum 600 mm c/c; a single-layer polyethylene reinforced vapour control membrane (VCL) reinforced with monofilament scrim having tensile strength of 150-170 N/sq.mm (MD) and weight of 150-180 GSM : and the existing trapezoidal liner sheet. The complete roofing system shall be supplied and installed in accordance with the manufacturer's recommendations and project specifications. | 900 | sqm | 100 | ₹90,000 |
| 2 | 0.9 MM THICK NON INSULATED ALUMINIUM FLASHING FOR ROOF : Supply and fixing flashing manufactured from aluminium alloy AA 3004 / 3005 (AlMn1mg1) as specified in BS EN 1396: 2015 minimum material thickness of 0.9 mm of same finish as Top Sheet. Max width up to 578 mm. | 70 | metre | 100 | ₹7,000 |
| 3 | WIND CLAMPS : Supply and installation of Wind Clamp for perimeter region of the roof as an additional safety requirement over and above the design requirement. Wind clamps made of aluminium alloy AA6082/AA6061 (Mill finish) of size 100mm long at required intervals along the length with fastener along the seam at every clip location. Finish: Mill Finsh | 2,000 | each | 100 | ₹2,00,000 |
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.72 MB
TenderDocument.pdf
Tender Documents • 10.50 MB
BOQ_332213.xls
BOQ • 0.23 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .