PROVISION OF OTM ACCN (PHASE 1 OF 2 PHASES) FOR 5 MED REGT AT JAISALMER (JOB NO S/2951)

Amount

Lump sum price worked out by the contractor for "BUILDING WORKS" as listed in Schedule ‘A’ Part-I representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 28(R)(R)

Lump sum price worked out by the contractor for "SITE CLEARANCE, EXCAVATION & EARTHWORK" as listed in Schedule ‘A’ Part-II representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 30

Lump sum price worked out by the contractor for "INTERNAL WATER SUPPLY " as listed in Schedule ‘A’ Part-III representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 32(R)

Lump sum price worked out by the contractor for "INTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-IV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 35(R)

Lump sum price worked out by the contractor for "ROAD, PATH & CULVERT & HARDSTANDING" as listed in Schedule ‘A’ Part-V representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 39(R)

Lump sum price worked out by the contractor for "SEWAGE DISPOSAL" as listed in Schedule ‘A’ Part-VI representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 41

Lump sum price worked out by the contractor for "AREA DRAINAGE" as listed in Schedule ‘A’ Part-VII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES B/F from Sl page No. 42(R)

Lump sum price worked out by the contractor for "FENCING, COMPOUND WALL AND GATE" as listed in Schedule ‘A’ Part-VIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 45(R)

Lump sum price worked out by the contractor for "EXTERNAL WATER SUPPLY" as listed in Schedule ‘A’ Part-IX representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 47

Lump sum price worked out by the contractor for "EXTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-X representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 51(R)

Lump sum price worked out by the contractor for "SUMMER APPALIANCES" as listed in Schedule ‘A’ Part-XI representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 52

Lump sum price worked out by the contractor for "LIGHTING PROTECTION" as listed in Schedule ‘A’ Part-XII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 53

Lump sum price worked out by the contractor for "ARBORICULTURE" as listed in Schedule ‘A’ Part-XIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 55(R)

Lump sum price worked out by the contractor for "SOLAR/HOT WATER SUPPLY" as listed in Schedule ‘A’ Part-XIV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 56(R)

Sch 'A' PART-XV (MISCELLANEOUS ITEMS) Notes: (i) This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under column 5 signifies this fact only. (ii) Excavation and earth work except for the items which categorically includes for same shall be measured and paid separately under respective schedule.

INTERNAL ELECTRIFICATION S&F decorative type fitting for LED tube 1x20 watt including LED tubular lamp detachable type, with IP20 protection, inbuilt driver etc complete with all accessories internally pre-wired including connecting up with twin core twisted flexible copper conductor cable of 1.0 sq. mm size complete all as specified and directed. Make: Crompton: Cat part No - LGT8-20-865-2 for LED tube and DSGLT8-14 for Fitting or equivalent as per Appx 'C'.

S&F lamp holder, PVC/polycarbonate type with cord grip cap suitable for pendent fittings with energy saving 9 watt LED bulb complete all as per specified & directed.

S&F box type LED flame proof tube light fitting 1x16/20 watt including LED tubular lamp with IP65 protection, inbuilt driver etc complete with all accessories internally pre-wired including connecting up with twin core twisted flexible copper conductor cable of 1.0 sq. mm size complete all as specified and directed. Make: Crompton: Cat part No - EXTN1LT8-20 or equivalent as per Appx 'C'.

S&F heavy duty, exhaust fans of 250 mm sweep suitable for SP 230/250 v 50 Hz AC supply complete with louver shutters including fixing/grouting of frame in wall and cutting opening complete and connecting with and including 3 Nos 1.5 Sqmm single core, PVC insulated but unsheathed FRLS cable with multistranded copper conductors from ceiling rose to fan complete all as specified and directed. Make: VENTILUS of Crompton or equivalent as per Appx 'C'.

S&F heavy duty, exhaust fans of 300 mm sweep 1400 RPM ISI Marked suitable for SP 230/250 v 50 Hz AC supply complete including fixing/grouting of frame in wall and cutting opening complete and connecting with and including 3 Nos 1.5 Sqmm single core, PVC insulated but unsheathed FRLS cable with multistranded copper conductors from ceiling rose to fan complete all as specified and directed. Make: EXHD-300-4-1 of Crompton or equivalent as per Appx 'C'.

S&F 12 watt LED porch light all as specified and directed. Make: Crompton: Cate part No - LCDSPLN-R-12-CDL or equivalent as per Appx 'C'.

S&F ceiling fans 1200 MM sweep Size, BEE Energy efficient 5 star rated Powered With Activ BLDC Technology, confirming to latest BIS Licensing and IS Specifications, Which consumes Less then 50% of the power as compared to conventional type Fans, Power Consumption 32 to 35 Watts, RPM 370 +- 25%, Service Value >= 6.0, Air Delivery in CMM = 220, down rods, All including connection with single core PVC insulated but unsheathed, FRLS cable with multistranded copper conductors IS 694 marked, from ceiling rose to fan complete all as specified and directed. Make: Crompton: Energion HS or equivalent as per Appx 'C'.

S&F wall mounted fan 450 mm sweep single phase 240 volts complete all as specified and directed. Make: Crompton: Cat part No - i-FLO or equivalent as per Appx 'C'.

S&F Air circulator 450 mm sweep wall mounted single phase 240 V complete all as specified and directed. Make: Crompton: Cat part No - ACVORTEX18WM or equivalent as per Appx 'C'.

S&F LED Security light fitting made out of pressure die cast aluminium powder coated housing high impact resistant 4mm thick toughened glass cover and matrix of power LEDs inbuilt electronic driver up to 10 KV surge protection fitted with adjustable pole adapter to enable on site tilt angle setting depending on road geometry CCT3000-6000 CRI greater than 70, input power 30 W system with 100 lumens per watt output operating voltage 160-260V with connection by three core PVC insulated multistranded copper conductor sheathed cable of size 1.0 SQMM fixed with & copper conductor sheathed cable of size 1.0 SQMM fixed with & including bracket made of GI Pipe 40mm bore light grade , 1.5 Mtr long bend shape required with 2 Nos MS clamps of suitable size and length, nuts & bolts complete all as specified and as directed

Note for item No 25.00 : (1) The LED lights shall have gurantee for 5 Years from date of completion of contaract , any defects noticed during this period shall have be rectified / Parts replaced immediately, security amount of 10% of the cost of the item shall be retained with the Deptt till end of the guarantee period. (ii) LED light manufacturer lab shall be accredited to NABL.Cat No. LSTS-30-CDL of Crompton or equivelent as per make listed in Appx 'C'.

S&F MCCB Distribution board, concealed fluch to wall for mounting MCCBs and MCBs , factory made, fabricated out of CRCA sheet not less than 1.20mm thick fitted with DIN channel , neutral link ,DBs shall be semi glossy finished with epoxy polester based powder paint process to ensure smooth finish and protection against corrosion atmosphere, the DBs shall be double door type with hinged door with locking arrangement. the DBs shall be of same make as MCCBs, DB shall also be provided with lable marking indicating the incoming and outgoing circuits on all ways specified . the DBs shall be IP 43 protection class for the following:

MCCB DB suitable for 125 Amp TPN 4 way

MCCB DB suitable for 125 Amp TPN 8 way

S&F of MCBs/MCCBs, of following rupturing capacity, IS-8828 marked of the undermentioned type and rating and fixing in DBs (DBs catered separately in this Schedule)

SP MCB 6 to 32 Amp 10 KA rupturing capacity

SPN MCB 32/40 Amp 10 KA rupturing capacity

TPN MCB 32/40 Amp 16 KA rupturing capacity

TPN MCB 63 Amp 16 KA rupturing capacity

FP MCCB 63 Amp 25 KA rupturing capacity

FP MCCB 100 Amp 25 KA rupturing capacity

M&L for Sub main wiring with Two runs of 4.0 Sqmm size main cable and one run of 4.0 Sqmm size earth continuty conductor of single core PVC insulated but unsheathed FRLS cable multi standed copper conductors, 1100 volts grade, IS-694 marked all drawn through and including suitable size rigid PVC conduit pipe medium grade ISI marked & fittings/ accessories all fixed to the surface of wall/ceiling complete all as specified & directed.

Ditto all as per item No. 28.00 here in before but of size 6.0 sqmm complete.

M&L for Sub main wiring with four runs of 10.0 Sqmm size main cable and two run of 10.0 Sqmm size earth continuty conductor of single core PVC insulated but unsheathed FRLS cable multi standed copper conductors, 1100 volts grade, IS-694 marked all drawn through and including suitable size rigid PVC conduit pipe medium grade ISI marked & fittings/ accessories all fixed to the surface of wall/ceiling complete all as specified & directed.

S&F T.V./Telephone Socket Outlet, including M.S. Box of size 100mm x 100mm x 65 mm with cover plate complete all as specified and directed.

M&L for Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of plate not less than 1.5 metre below normal ground level, the earth electrod surrounded by adequate quantity of charcoal dust and salt to a packet thickness of 15 cm on all sides and including GI earth lead wire 4 mm dia bolted (with GI nuts, bolts & check nuts) and rivetted to earth plate electrod at one end and connected to main switch board/DB's at the other, earth wire protected by and incl GI pipe 15 mm dia(medium grade) from top of electrod to main switch board (upto 7.50 meter long) and also incl watering pipe GI pipe (medium grade) 20 mm bore from bottom of earth pit to top of electrod complete with earth pit in PCC 1:2:4 type B-0 using 12 mm graded crushed stone aggregate, RCC cover, funnel, wire mesh including necessary excavation & earth work etc all as shown on electrical plate No. 3 of SSR Part-I, complete all as specefied & directed.

ROAD, PATH & CULVERT S&F traffic sign board of triangle shape with 30 cm length each side of circular shape with 0.6 mm dia with MS sheet including MS pipe of height 2.0 m above GL and including excavation of post holes, removal and packing with PCC 1:3:6 type C-2 of size 45 cm x 45 cm x 60 cm complete including lettering with reflective sheets, painting, fixing etc complete all as specified & directed.

M&L for preparing unsurfaced WMM surface by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc. and applying evenly a prime coat bitumen emulsion SSI per IS 8887 @ 10 Kg per 10 sqm complete all as specified and as directed.

M&L for WMM, 100 mm thick (compacted thickness) in single layer conforming to the grading given in Table 400-13 & physical requirement given in Table 400-12 spread with mechanical means & rolled by using 8-10 ton vibratory power roller over compacted sub grade surface as specified in clause 406.3.5 of MORT&H specification complete all as specified & directed.

M&L for providing 40 mm consolidated thickness bituminous premix Semi Dense asphaltic concrete with 5.5 % binder content VG-30 by weight of totsl mix, with hydrated lime filler 2% using mechanical paver with string senser with marshal stability 9.0 KN at 60 degree C laid by mechanical paver, rolled and compacted to required camber and gradient with 8-12 tonne power roller to a uniform smooth surface complete all as specified & directed. Note:- In case there is any variation in quantity of binder content as specified above in plus side due to job mix formula, there is no price adjustment for using more quantity of bitumen & if the same is in minus side then Rs. 33.00 per Kg of binder shall be adjusted in above quated rate.

M&L for marking 2.00 mm thick centre line dashes, arrows, brackets & similar work on road surface as par IRC pattern with thermoplastic Paint of approved make & mix with 8% mica applying with special applicator machine complete and making trafic diversion arrangements complete all as specified & directed.

S&F ABS speed breaker product code AP-1004 Make ACME or equivalent of size 350 mm wide and 50 mm height in yellow and black colour (alternatives) complete all as per manufacture instruction and as directed.

S&F cat eye two ways reflective of size 100mm x 100mm x 18.5 mm with aluminium body with reflective panies amber/red/white complete all as specified & directed. Make:- Simens/Dark eye/Solar/Road star/Alfa Gold as approved by GE.

S&F delineator made out of 65 mm internal dia MS circular hollow pipe of 750 mm long medium weight ends covered with 150 mm x 150 mm x 3 mm thick and top end covered with 100 mm x 100 mm x 10 mm thick mild steel plain sheet top portion covered with white and coloured high intensity prismatic grade retro reflective sheeting in 50 mm wide strips of each colour (150 mm width) reflective band shall be used complete all as specified & directed.

M&L for Septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, RCC M-30 Design Mix in Walls , Base Slab , Baffle walls and Roof Slab including beams etc with Vent shaft , manhole openings with cover connection etc. complete for 50 users all as per drawing NO. CEJZ/TD/30 Sheet 1/3 to 3/3.

Ditto all as per item No. 41.00 here in before but of 100 users complete.

Ditto all as per item No. 41.00 here in before but of 150 users complete.

M&L for construction of soakage wells excavation in any type of soil,foundation in PCC 1:3:6, walls of honey combed masonary with top ring of M-25 concrete including intercepting chamber and screen chamber made of brick masonry in CM, RCC cover slab in M25/SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 2.40 m dia x 6.00 m effective depth all as per drawing No. CEJZ/TD/29 sheet 1/3 to 3/3.

Ditto all as per item No. 44.00 here in before but of size 3.60 m dia x 3.00 m effective depth complete.

Ditto all as per item No. 44.00 here in before but of size 3.0 m dia x 3.0 m effective depth complete.

EXTERNAL WATER SUPPLY Supply & laying for centrifugally cast (spun) ductile iron pressure pipe of 150 mm bore with socket & spigot ends including specials having ISI stamping marking with IS 8329/2000, classification "K-7" in standard length of 5.50/6.0 mtrs with cement mortar lining complete all as specified & directed.

Ditto all as per item No. 47.00 here in before but of 100 mm bore complete.

Supply, installation, connecting and testing sluice valve, non rasing type spindle, cast iron body & wedge with Bronze wedge ring on both side, gland packing, class - PN 1.0 with flanged ends drilled suitable for bore of pipe 150 mm ISI marked (IS:14846:2000) having S.S spindle with iron wheel at top, complete with nuts bolts washers rubber gasket etc all as specified and directed.

Ditto all as per item No. 49.00 here in before but of 100 mm bore complete.

Ditto all as per item No. 49.00 here in before but of 80 mm bore complete.

M&L for construction of stone masonry valve pit chamber of size 1050mm x 750mm x 1000 mm type 'A' complete with MS cover of 3 mm thick sheet and angle iron frame 40x40x6mm size with locking arrangement including necessary excavation and earth work in any type of soil, PCC in foundation, plastering and two coats of anti corrosive paint over one coat of primer complete all as specified, shown in drawing No.CEBZ/TD/43/2011 sheet 1/1 and as directed.

Ditto all as per item No. 52.00 here in before but of size 900mm x 600mm x 1000 mm type 'B' complete.

Ditto all as per item No. 52.00 here in before but of size 450mm x 450mm x 600 mm type 'B' complete.

S&F foot valve conforming to IS 4038 of 100 mm dia complete all as specified & directed.

S&F Cast Iron double flanged single door swing type Non Return Valve (NRV) class PN-1.0 per IS 5312/2004 including joints & jointing materials (Rubber gasket, nut, bolts,washers etc) of 100 mm bore complete all as specified & directed.

Supply, install, test and commissioning of manufacturer's factory assembled and tested electric driven centrifugal pump set of capable of delivering 31.66 LPS at 45 mtr head comprising of horizontal split casing pump single/multi stage CI casing body with bronze impellers coupled through a flexible coupling and coupling guard to a electric driven 3 phase TEFC induction motor 415 V not less than 40 HP complete mounted on common MS base frame and foundations as per manufacturer design for the pump sets including PCC foundations, MS bolts with nuts and provn of priming to pumps by providing the water of capacity 500 Litres to be installed of roof of bldg and duly connected with 15/20 mm bore of GI piping medium grade etc complete all as specified & directed.

a) Copper bus bar capacity 200 Amps for Phase-R-Y-B & Neutral b) MCCB FP 100 Amp 25 kA (I/c) c) MCCB FP 63 Amp 25 kA - 2 Nos (For centrufugal pump-02) d) MCB TPN 32 Amps 10 KA-02 Nos (for pumphouse bldg-01, building security light-01) e) S&F Star Delta starter 3 phase 415 V 50 Hz for pump of above mentioned 40 HP complete with under voltage and with overload protection & Single phase preventor.

Supplying and laying Jodhpur stone quarry faced stone slab cover 25 to 30 cm in width, 60 cm long and 40 to 50 mm thick, laid dry and abutting each other with gap between adjacent slab not exceeding 10 mm over under ground cables for protection complete as specified & directed.

M&L for sand cushioning to under ground cable using tibba sand and gently punning to cushioning to cable complete all as specified and directed. Note:- For the purpose of payment only punned thickness will be measured.

EXTERNAL ELECTRIFICATION M&L for 15 meter high galvanized mast made out of heavy duty MS pipe section reducing from bottom to top 15mm thick bottom plate fixing arrangement with 20mm dia foundation bolts grouted in PCC foundation including necessary civil work etc complete with fixing arrangements of LED flood light symmetrically fixed along with their control gear and having two point suspension system with steel wire rope of 6mm dia & double drum winch (All as per OEM recommendations ) and including fixing of LED type aviation light-02 Nos & air termination for lightening protection duly connected to earth test point with aluminium strip all as specified and comprising of following :-

(a) Fabricate , supply , install , testing and commissioning of outdoor LT panel board of size 0.75 x 0.50 x 0.30 meter approx tottaly enclosed made out of 3.15mm thick CRCA sheet , dust and vermin proof with front opening 440V,3 phase, 4 wire having 200 Amps capaciy aluminium bus bar insulated with sleeves , incoming MCCB TPN 40 Amps 440V 16 kA 01 No and copper wiring with multi stranded cable including cable glands, lugs and two coats of synthetic enamel paint over a coat of red oxide primer and making necesssary padestal 300mm height from floor level with PCC work all as specified and directed

S&F automatic street light timer switch of rating 3 kW in Single phase using nature switch-02 for automatic swithing "ON/OFF" of street lighting based on lux level of natural light along with contactor rating 25 Amp single pole , MCB 25 Amps single pole (1 No) with support terminals prewired with PVC insulated strand copper wire enlosed/housed in pole wall mounted enclosure made of rust proof , shock proof , termite proof & dust proof FR grade specill moulded compound Junction Box complete all as specified and directed. Model - SWADEEP - 02EC1P (for 8 kW load) - 01 No or equivalent as per Appx 'C'.

S&F automatic street light timer switch of rating 5 kW in Three phase using nature switch for automatic swithing "ON/OFF" of street lighting based on lux level of natural light along with contactor rating 40 Amp single pole , MCB 40 Amps tripple pole (1 No) with support terminals prewired with PVC insulated strand copper wire enlosed/housed in pole wall mounted enclosure made of rust proof , shock proof , termite proof & dust proof FR grade specill moulded compound Junction Box complete all as specified and directed. Model - SWADEEP - 02EC5kW3P (for 5kW load )- 01 No or equivalent as per Appx 'C'.

M&L for Earthing of galvanized steel earth plate electrode 600x600x6mm thick buried directly in ground vertically to a depth not less than 2.25 metre below ground level with top edge of the plate not less than 1.5 metre below normal ground level connected to GI strip 32x6 mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanized iron or Steel and earth strip protected by GI protection pipe light grade 40 mm (up to 7.5 Mtr ) and as shown in electrical plate No. 3 of SSR Part-I and connected to earthing test point including filling of alternate layer of charcoal or coke and salt around the electrode, necessary earth work, in any type of soil, PCC 1:2:4 type B1 using 20mm graded stone aggregate, funnel, GI watering pipe 20mm dia (light grade), 50mm thick RCC cover reinforced with 8mm dia CTD bars @ 150mm C/C both ways with 2 Nos. 10mm dia 150mm long MS handle emboded in to slab, wire mesh, etc complete and testing on completion all as specified and directed.

Supplying, install and errect in true vertical position steel tubular swaged welded pole, 11.00 mtr long, conforming to IS-2713 part-II, type 410 SP-55, complete with cast iron/MS base plate 6mm thick and of size 300x300mm, finial taper, pole cap, bolts, nuts, washers & screws etc. pole made out of ERW M.S tubing including of holes required Nos and size for fixing of cross arms, painting with one coat of red oxide primer and two coats of aluminium paint for exposed surfaces and two coats of black bituminous paint for portion embedded in concrete, painting six signal red and yellow colour bands alternatively from lower portion of exposed pole starting from plinth block, each band of 300mm height at 300mm spacing, painting pole number, letters/figures by black paint complete all as specified and directed.

Ditto all as per item No. 65.00 here in before but of type 410, SP-31 9.00 mtr long complete.

S&F integrated LED street light liminaire comprising of epoxy powder coated housing enclosed with glass cover in frame of capacity 36 watt mounted on MCPCB including connecting with PVC insulated sheathed cable of size 3 x 1.5 SQMM copper conductor cable in PVC conduit from from junction box to street light fitting complete all as specified and directed. Make: Crompton - LSTS-36-CDL or equivalent as per Appx 'C'.

M&L for bracket made out of GI tubing single piece not welded but bended at proper angle of size 40mm dia,light grade 1.5 mtr long including fixing with MS clamps -2 Nos made out of 50 mm wide 5mm thick flat iron with M.S nuts bolts 75 mm long 12 mm dia -4 Nos with flat washer (3mm thick) -02 No for each including painting with aluminium paint over one coat of red oxide to the M.S clamps & bracket etc including connecting with PVC insulated sheathed cable of size 1.5 sqmm 2 core copper conductor cable in PVC conduit from from junction box to street light fitting complete all as specified and directed.

S&F Hot Press Moulded SMC (Sheet Moulding Compound) Junction Box of inside dimension 250 mm x 200 mm x 105 mm including four Nos Aluminium Stud / terminal of suitable size and one Nos MCB TPN 32 Amps and fixed on pole with clamps, bolts & nuts complete with two coat of synethictic enamel paint/ powder coated complete all as specified and directed.

S&F Hot Press Moulded SMC (Sheet Moulding Compound) Junction Box of inside dimension 250 mm x 200 mm x 105 mm including 2 Nos Aluminium Stud / terminal of suitable size and one Nos MCB SP 06 Amps and fixed on pole with clamps, bolts & nuts complete with two coat of synethictic enamel paint/ powder coated complete all as specified and directed.

S&F decorative post top latern LED fitting for 360° indirect light of 40 Watt resistant to impact and corrosion, glare free and better uniformity IP-65 protection/M- Milky version with surge protection, LED driver complete all as specified and directed. Make - Crompton Cat Part No. LPTO-40-CDL/M or equivalent as per Appx 'C'.

S&F LED flood light 200 watt heat resistant tempered glass for protection with 5 KV surge protection & die cast housing with IP-65 protection complete all as specified and directed. Make: Crompton, Cat Part No. LFLN-200-CDL/60 or equivalent as per Appx 'C'.

Supply, fix, test and commissioning of lithium based integrated solar street light 15/16 W the system shall include FRP / ALUMINIUM Housing 15/16 W Hi brightness LED light (120-140 luminous/W) operating voltage 11.1/12.8 volt. IP 65 complaint. driver efficiency 85% to 90%, CRI > 70 CCT 5000 TO 6500K.toughen glass acrylic cover. MPPT/PWM base charge controller with hi-efficiency LED driver design with/without dimming function as per IEC standards. Hi-efficiency Mono/poly crystalline solar panel. lithium battery, 2 days autonomy,19.8 AH. DOD 90 to 95%, 25/30 wp solar panel complaint to MNRE specification complete all as specified and directed. Make: Crompton, Cat Part No. CSADSPI15CDL or equivalent as per Appx 'C'.

M&L for GI medium grade Pole 3" dia 6 mtr height including planting depth for solar street light with aluminium paint over one coat of red oxide including foundation of pole with PCC 1:2:4 using 20 mm graded aggrigate of size 600 mm x 600 mm x 1000 mm deep complete all as specified and directed.

a) Copper bus bar capacity 1000 Amps for Phase R-Y-B -03 Nos & 500 Amps for neutral- 01 No b) Air Circuit Breaker 4 Pole 630 Amp, draw out type with microprosser based release & breaking capacity 50 kA - 1 No c) MCCB 4 Pole 300 Amps 35 kA with thermal setting 80-100% - 1 No d) MCCB 4 Pole 200 Amps 25 kA with thermal setting 80-100% - 1 No e) MCCB 4 Pole 125 Amps 25 kA with thermal setting 80-100% - 1 No f) MCCB 4 Pole 63 Amp 25 kA with thermal setting 80-100% - 2 Nos (01 Spare) g) MCB SPN 32 Amps 10 KA- 1 No h) MCB TPN 32 Amps 10 KA - 2 Nos

Ditto all as item No- 75.00 here in before but consisting of followings :- (FP-1)

a) Copper bus bar capacity 400 Amps for Phase R-Y-B -03 Nos & 200 Amps for neutral- 01 No b) MCCB 4 Pole 200 Amps 25 kA with thermal setting 80-100% - 1 No (I/C) c) MCCB 4 Pole 100 Amps 25 kA with thermal setting 80-100% - 1 No d) MCCB 4 Pole 63 Amps 25 kA with thermal setting 80-100% - 1 No e) MCCB 4 Pole 40 Amps 16 kA with thermal setting 80-100% - 2 Nos f) MCB SPN 32 Amps 10 KA - 2 Nos

Ditto all as item No- 75.00 here in before but consisting of followings :- (FP-2)

a) Copper bus bar capacity 300 Amps for Phase R-Y-B -03 Nos & 200 Amps for neutral- 01 No b) MCCB 4 Pole 100 Amps 25 kA with thermal setting 80-100% - 01 No (I/C) c) MCCB 4 Pole 80 Amps 25 kA with thermal setting 80-100% - 01 No d) MCB SPN 32 Amps 10 KA - 03 Nos

Ditto all as item No- 75.00 here in before but consisting of followings :- (FP-3)

a) Copper bus bar capacity 250 Amps for Phase R-Y-B -03 Nos & 160 Amps for neutral- 01 No b) MCCB 4 Pole 125 Amps 25 kA with thermal setting 80-100 % - 01 No (I/C) c) MCCB 4 Pole 63 Amps 16 kA with thermal setting 80-100% - 02 Nos d) MCB SPN 32 Amps 10 KA - 03 Nos

Ditto all as item No- 75.00 here in before but consisting of followings :- (FP-4)

a) Copper bus bar capacity 500 Amps for Phase R-Y-B -03 Nos & 250 Amps for neutral- 01 No b) MCCB 4 Pole 300 Amps 35 kA with thermal setting 80-100 % - 01 No (I/C) c) MCCB 4 Pole 160 Amps 25 kA with thermal setting 80-100% - 01 No d) MCCB 4 Pole 63 Amps 25 kA with thermal setting 80-100% - 02 Nos e) MCCB 4 Pole 32 Amps 10 kA with thermal setting 80-100% - 04 Nos f) MCB SPN 32 Amps 10 KA - 03 Nos

Ditto all as item No- 75.00 here in before but consisting of followings :- (FP-5)

a) Copper bus bar capacity 250 Amps for Phase R-Y-B -03 Nos & 160 Amps for neutral- 01 No b) MCCB 4 Pole 32 Amps 25 kA with thermal setting 80-100 % - 01 No (I/C) c) MCB SPN 32 Amps 10 KA - 08 Nos

HOT WATER SUPPLY S&F storage type electric water heater closed/vented, vertical type geyser (5 star rating) material of inner container stainless steel of capacity 25 Ltrs including grouting 4 Nos nut bolts, air release valve & non return valve complete with all accessories complete all as specified & directed.

SUMMER APPLIANCES Supply, installation and testing of refrigerator not less than 190/195 Litre capacity, 230 V, 50 HZ, 5 star rating, frost free, double door with humidity control and deoderizer, toughned glass shelves, stabilizer free operation, inverter technology compressor, rust resistance body, dual thermostart for refrigerator & freezer, with cool pack, complete all as specified & directed.

Ditto all as per item No. 83.00 here in before but of capacity not less than 308/310 Litre complete.

S&F voltage stabilizer for automatic operation single phase naturally air cooled indoor type and designed for input variation between 140 V to 270 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 1 KVA complete all as specified and as directed.

Ditto all as per item No. 85.00 here in before but of capacity 3 KVA complete

Supply and install desert cooler electric driven (single phase) three speed having nominal air flow capacity 4000 CFM per hour, with 18" exhaust fan propeller ISI cooler fan motor copper winding single phase fitted with / having aluminium blade of minimum size 500 mm ,submersible pump, Max power consumption of 325 Watts. Cooler body made out from 20 gauge mild steel galvanized iron sheet & water tank made out of 18 SWG, having capacity 60 Ltr minimum including three louvers with wood wool pad, flexible PVC distribution pipes and 3 way junction complete all as specified & directed.

ARBORICULTURE Supply & plantation of ASHOKA with saplings of 1.2 to 1.5 mtr hight including excavation of suitable size pit (size of pit shall not less than 75 cm dia & 75-80 cm deep) to accomodate the roots of plants including provision of good earth by treating with farm yard manure in the ratio (4:1), fertilizers and pesticides (i.e Bevation and neem cake BHC 10% linson dust. Thimment or phorate,manures super and vermicompost) and making up the trench area to proper levels, for its growth and maintaining by regular watering and weeding etc and maintaining for one year from the certified date of completion of the work complete all as specified & directed.

Ditto all as per item No 88.00 here in before but NEEM.

Ditto all as per item No 88.00 here in before but SHISHAM.

Ditto all as per item No 88.00 here in before but IMLI

Ditto all as per item No 88.00 here in before but PIPAL BER

NOTE FOR ITEM NO. 88.00 to 92.00 (i) Height of plant shall be measured from top of follage ( not from the isolated branch/leaf,main stem) to 150mm from top of root. (ii) Water will not be supplied by MES. Contractor has to make his own arrangement for watering to plants and grass. (iii) The rates quoted by the contractor deemed to include watering, maintenance of plants till 2 years after certified date of completion of work. (iv) During 2 years after completion if any plant is found dead, or not of satisfactory growth, plants of approved size and shape shall be provided without any extra cost to the state. Simillarly the grass shall also be replanted without any extra cost if no desired growth is achieved during the period of 2 years. (v) Supply and application of manure, sweet earth and pesticides, fertilizers, etc up to 2 years after completion are deemed to be included in the quoted unit rate. (vi) Tenderer to note that 20% cost of quotation against these items shall be retaied for 2 years after completion.In case of failure by the contractor to maintain the plants as above, the same shall be carried out by the department at his Risk and Cost and the expenditure shall be deducted from this retained amount. (vii) The plants shall be brought at site Six months before the date of completion of the work as per Work order.

M&L for grassing the area with walcyndan dactyon (Calcultas grass) having rhizomes with sufficient nodes in row of 5 cm apart in either direction and watered including maintenance of 02 years of the lawn till the grass forms in thick lawn free from weeds & fit for moving including soreading of good earth & compost.

NOTE FOR ITEM NO 93.00 : - Grassing shall be carried out to carpeting effict i.e on installation 80% of ground should not be vissibal due to plant cover if the desired effect is not obtained than additional grass will be planted at specified location to achive the effect.

PROVISIONAL LUMP SUM (PLS) Provide Provisional lump sum for (a) Construction of sedimentation tank of sizes 2.0m x 10.0m x 1.0m deep- 2 Nos, (for rain water harvesting) (b) Construction of Steel gate 7.50 M wide complete- 4 Nos (c) Construction of Steel gate 5.50 M wide complete- 3 Nos

NOTE FOR ITEM NO 94.00 : - 1) Provisional lump sum shall be expended wholly or in parts as directed by GE. The works under Provisional Lump Sum shall be measured and paid for at applicable rates in MES SSR 2010 Part-II subject to percentage ( + or - denomination) computed under last colummn of this schedule above/below the provisional lump sum price worked out by the MES. 2) For details refer relavent TD drawings.

SHRI GURMUKHDAS CONTRACTORS PVT. LTD.

MANGLA AMIT BUILDERS PVT LTD

Dasmesh Buildcon

RAGHUSONS INFRA ENGINEERING PVT. LTD

DHARIWAL TRADERS PRIVATE LIMITED

Jeet Construction