44/EE(R/L)/2025-26

Making of RCC foundation with 1:2:4 (1Cement: 2Coarse sand: 4Concrete) of size 550 mm x 550 mm and deep 1000 mm, 08 Nos. 10 mm dia iron rods upto 01-meterlong and 06 Nos. rings of 08 mm dia iron rods suitable for 8-meter height octagonal pole with 04 Nos. 16/18mm dia tempered MS/GI J type bolt of 600 mm long & suitable aesthetic good-looking plinth. The level of base plate of octagonal pole should be 150 mm above the curve stone/ central verge/ground level. So that the foundation placed along with bolt does not submerge in the rain water. Suitable provision for 63mm dia 2 Nos. DWC pipe for cable entry and exit complete as required

Installation of 6 mtr. height Octagonal Pole on newly prepared RCC foundation. ( pole with bracket shall be provided by NDMC)

Cartage, loading & unloading of octagonal pole with bracket 6 mtr. Height from NDMC store to site

Dismantling of existing old Steel tubular/RCC Pole including removal of malba/Debris from site in all respects

Dismantling of existing LED fitting with SOH bracket

Re-installation of LED fitting with SOH bracket in 6 mtr pole with complete connections and Providing & fixing of 1.5 sq.mm. /3C PVC sheathed stranded copper conductor from termination box to LED fitting.

Drawing of 95 sq mm. 3.5 core XLPE cable of grade 1.1kv in existing HDPE/DWC pipe. ( Cable shall be provided by NDMC)

Drawing of 16 sq mm./ 4 core XLPE cable of grade 1.1kv in existing HDPE/DWC pipe. ( Cable shall be provided by NDMC)

Handling of XLPE cable of grade 1.1KV upto 95 sq.mm/3.5C which is not necessarily laid in ground part of it going upto pole/panel/pillar

Earthing with G.l. earth pipe 4.5-meter-long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

Supplying and laying of DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, part II complete with fitting and cutting, jointing etc. direct in ground (75cm below ground level) including excavation and refilling the trench. 12 a)63mmdia.(OD-63 mm &ID-51mm nominal)

12 b)120mmdia.(OD-120mm&ID-103 mm nominal)

Trenchless system across the roads for laying LT Cables including Supplying & laying of HDPE pipes ISI Marked PN-4class of size 110 mm dia. (OD) in NDMC area under road light division. The Trenchless system is to be carried out on the road crossing with another road/Dense Bitumen Carpeted Road/Inter locking Tiles/Sand stone Paths etc.

SITC of Feeder Pillar Medium Size (950mmx430mmx2000mm) fabricated out of MS sheet Steel of 3.15mm thickness and to be used as electrical distribution feeder pillar suitable for 415V, 50HZ, AC supply 3- phase & 4 wire system for installation on road/footpath including required civil work/foundation as per enclosed drawing & Specifications. Following items to be fixed in feeder pillars: 1. Electrolytic aluminum bus-bar grade 6101 for phase of length 800mm size (50x10) mm-3 nos. 2. Electrolytic aluminum bus-bar grade 6101 for Neutral of length 700mm size (25x5) mm-1 nos. 3. Vertical HRC Fuses base (DIN type) switching system 400 Amp -6nos & 250 Amp 18 nos. with 415V rating, 50HZ, AC supply 3- phase & 4 wire system with Copper terminal. 4. Connection of existing cables with suitable size of Aluminium lugs at Fuse base. 5. MNX 110 Amp. Contractor of L & T make with astronomical Timer for automatic switch ON/OFF street supply as per required. 6. Making of line diagram inside the door of the pillar using white paint. 7. Pillar will be painted green outside & Black inside with white logo of NDMC to be printed on front of the door including embarrassing/writing of pillar number at face of the door as required. 8. Earthing terminal on both side of the pillar. 9. Making of Suitable foundation of pillar with masonry work as site requirement. 10. Danger Board 440V to be fixed. Make of base .: Siemens or equivalent

Please Enable Macros to View BoQ information