Breakdown maintenance of LT overhead line of different colonies under CCD, Dhori Area for a period of one year

Amount

Disconnection/re-connection of conductor jumper during breakdown

Dismantling of damaged light fittings from pole

Installation of fresh light fittings on pole

Dismantling of over head lines comprising of aluminium over head conductor, G.I. wire, cross arms, insulators etc. as required

Re-erection of ACSR conductor of 7/3.35 mm to 7/4.00 diameter and above including binding etc as required

Dismantling of damaged poles embedded in cement concrete foundation etc as required

Erection of steel tubular pole of length in cement concrete 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling etc as required (pole supply by department )

Transportation of steel tubular pole from CCD substation to work site including carriage of poles at work site

Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area

Supplying and erection of galvanised stay set for 11 KV over head lines complete with 19/ 20 mm dia X 1.8 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm thick, thimble, stay clamps, turn buckle ( 20 mm X 600 mm ), 7/ 4.00 mm dia G.I. stay wire and 11 KV strain insulator etc in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling etc. as required.

Supply of 6 SWG GI wire (for cradling)

Erection of GI wire (for cradling)

Supply of channel iron 75 mm x 40 mm x 7.14 kg/mtr cross arm for 2 wire OH Line complete with clamps bolts and nuts etc including drilling of holes of insulators pins and painting with primer and finish paint as required.

Supply of channel 75 mm x 40mm x 7.14 kg/mtr cross arm for 4 wire OH Line complete with clamps bolts and nuts etc including drilling of holes of insulators pins and painting with primer and finish paint as required

Erection of channel iron cross arm on poles etc as required

Supply and erection of 100 mm X 80 mm pin insulator complete with G. I. spindle and nuts etc as required

Supply and erection of 100 mm X 110 mm shackle insulator complete with G. I. spindle and nuts etc as required

Making of aerial fuse of lighting transformers

Dismantling of service wire /service cable from quarters

Cleaning of carbon from service wire/service cable and re-connecting for power supply to quarters

Total impact of GST for the purpose of CTC

M/s engineer associates

Aadi Enterprises