Erection of poles and streetlights at ghodke plot bilal plot majid and Laproscopic hospital areas of ward no. 33 of HBL DN.

Erection of poles and streetlights at ghodke plot bilal plot majid and Laproscopic hospital areas of ward no. 33 of HBL DN.

4.2.3 5 m - Top 70 mm and Bottom 130 mm dia Fabricating, supplying and erection of . ms long hot dip Galvanized Octagonal hot dip Pole with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062 for...

1.4.1 In all kinds of soils Depth upto 1.5 m Earth work excavation for Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Build...

Base Concerete 2.1.1 Mix 1:5:10 Using 40 mm nominal size graded crushed coarse aggregates PCC Dimension =0.4mX0.4mX0.1m=0.016Cum .Providing and laying in position Cement Concrete for levelling course ...

2.11 h. All other type of structures for TMT Steel Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cut...

Concerete 2.2.1 M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Providing and laying in Cement Concrete for all

Basement & surface level works, return walls,

retaining walls, ...

13.4.1 Single bracket 1.5 m. Length

Supplying and fixing telescopic M.S. bracket fabricated byusing 0.5m length 4" dia telescopic M. S. pipe, with 2" dia1.5mlong M.S.Bracket and are welded with suita...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short cir...

1.6.1) Ordinary Soil Digging of Pit for providing GI Pipe type Earthing

Angle Iron Supplying and fixing angle iron frame work fabricated out of M.S. angle iron. and M.S. flat … with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approve...

Labour Charges Labour charges for laying of 1.1 KV class UG cable in existing trench GI pipe / stoneware pipe / on wall / on pole as required. 31.05 ) 2.5 to 25 Sq mm

1.17.1 All kinds of soils. Depth upto 1.50 m Earth work excavation for Cables Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifi...

32.07) 25 Sqmm, 3.5 Core, (12 GI Strips - 4 x 0.8 mm) Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVCextruded Inner sheath armoured UG LTcable as per IS-1554 (Part-1) or IS-7...

66.05) HDPE/PLB Pipe 40/33 mm

Pot Head Supplying and fixing of class A (medium duty) GI pipe of wall thickness not less than 3.25mm on pole/wall/drain crossing with necessary clamping arrangements for UG cable of 1.1KV. 35.01) Up ...

Pipe type earthing for each street light box 51.01) GI Grounding pipe, B - Class, 42 mm dia, 2.5 Mtr long,3.2 mm thick with bolt, nut, GI Strips and washer complete Minimum Weight of GI Pipe: 7.3 Kg

51.02) Good Quality well burnt Charcoal for grounding purposes packed in non returnable gunny bag of 30 Kg each

51.03) Good Quality Salt for grounding purposes packed in 50 Kg gunny bag

11.8.3 LED Streetlight 70W Supply & Fixing of LED Street Lightwith pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser wi...

5.7.2) 32Amps Fuses Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers.

5.13.1 ) 25 Amps Contactor Switch Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 R...

5.18.7) 6-32 A TPN MCB Switch Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 ...

5.47) 3-120sec setting. Timer Switch Supplying and fixing Microprocessor based Electronic timer (without contactor, Din Mounting using necessary bolts, nuts and washers etc.,

5.42.3) 18 SWG MS Box Fabricating supplying and mounting MS box made out … SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinge...

3.9 Hylum plastic sheet Supplyingandfixinghylumplasticsheet3mmthickwithnecessarynitchesforfixingswitches,regulatorsetc.,andfixingonexistingwood or metal box using N. F. screws.

2.5.1 2C x 1.5 mm2 Wire:

SupplyinganddrawingFlexibleMulticoreCablemanufactured with electrolyticgradeflexiblecopperwithlowconductor confirmingto IS 8130-1984 and (Virgin) PVC insulation sheathed suita...

2.3.4) 4 sqmm Wire:

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiri...

13.1.1 Using 25mm dia G.I.Pipe SupplyingandFixingof.mmdiaclassAGIpipebracket upto2 mslongbent atsuitable angle andfixing tothisbracket street light fittingofall capacities toGIorGIor rail orRCCpole /w...

11.9.1 LED Floodlight 70W Supply & Fixing of LED Flood Lightwith pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with...

13.4.3 Double bracket 2x1.5 m. Length

Supplying and fixing telescopic M.S. bracket fabricated byusing 0.5m length 4" dia telescopic M. S. pipe, with 2" dia1.5mlong M.S.Bracket and are welded with sui...

2.08 LT 2 Pin Cross Arms - GI Cross Arms (MS & GI) as per IS-1977

5.01 Fixing of 2 Pin cross arm with Insulator and Braces fixing Fixing of Cross Arm, Single Top Support, EG Stirrup, Anticlimbing Device, Guy Set, Guarding

7.02 Rabbit ACSR

(6/3.35 mm Al + 1/3.35 mm St), Std Wt: 214 Kg/KMACSR Conductor as per IS-398 (Part -

6.01) Stringing of conductor Squirrel, Weasel, binding of conductor on each insulator and dead ending on strain or disc/strain insulator by means of clamps.Stringing of Conductor

6.03 1.1 kV Ceramic Pin Insulator (Shell only)Insulator as per IS-1445 for Ceremic, IS7935 for GI Pin, IEC-61109 for Polymeric

6.07 No. 8 Strain Insulator Insulator as per IS-1445 for Ceremic, IS7935 for GI Pin, IEC-61109 for Polymeric