CA NO GE/H-11/2021-22 NAME OF WORK PERIODICAL SERVICES TO EXTERNAL OF BLOCK A D E F AND G OF MAIN HOSP BLDG INCLUDING CLEARING OF OVER GROWTH CLEARING OF ROOF TOP AND CLEANING/MAINT OF WATER TANK (UP TO 1000 LTRS) UNDER GE E/M RR HOSP DELHICANTT10

Amount

M&L for Preparation of old plastered or unplastered surfaces of wall and applying one coat of 100% ANTIFUNGAL Acrylic Emulsion exterior grade weather proof paint upto & 5 storyed high building complete all as specified and directed by Engr-in-Charge

M&L for preparation to old/new decorated external surface of wall by scraping the loose scale etc by sand paper and filled with wall care putty (average thickness of 1.5 mm) to achieve even and smooth surface and then applying two coats of 100%. Anti fungal acrylic emulsion exterior grade weather proof paint over a coat of weather resistant acrylic primer complete all as specified and directed by Engr-in-Charge.

M&L for complete removal of old treatment on surfaces of walls through electrically operated spray machine using sand paper for preparation of old decorated plastered surfaces of wall, then applying two coats of 100% Anti fungal acrylic emulsion exterior grade weather proof paint over a coat of weather resistant acrylic primer upto & 5 storyed high building complete all as specified and directed by Engr-in-charge.

All as per item no-02 here-in-before but on ceiling surfaces.

M&L for complete removel of old treatement on plastered surfaces of exteranal wall and applying two coat texture wall coating raised or recessed by spray gun (colour,design & pattern as approved) including preparation of surface and making good surrounding surfaces complete all as specified and directed by Engr-in-Charge.

M&L for Preparation of old decorated plastered or unplastered surfce of wall and otherwise and applying one coat of 100% Anti fungal acrylic emulsion exterior grade weather proof paint on Floor paint complete all as specified and directed by Engr-in-Charge.

M&L for preparation of existing kerb stone/concrete/brick surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint over one coat of primer complete all as specified and as directed by the Engr-in-Charge.

M&L cleaning and preparing the existing road surfaces and making good for Road Marking with material and labour by reflective Thermoplastic white and yellow road marking paint conforming to BIS 3262 laid down through Road marking machine in 2.5mm thick layer of Crystalex and use of 5 Kg material per Sqm by incorporating the white and yellow glass beads for reflectivity in 100 mm width complete all as specified and directed by the Engineer in Charge

M&L for removing vegetation /plants on wall,roof,sunshed,and junction of OHT tanks,pipes etc of the building up to G+5 floor height up rooting to any depth and filled the hole by nominal mix concrete (1:2:4) type B0 with water proofing compound @ 3% of weight of cement and finish the surface to match with the existing finished surface including nacessary scafolding and proper safety arrangemets complete all as specified and as directed by the Engineer-in-Charge.

Taking down cement plaster on brick/ surfaces built in cement mortor including raking out joints, hacking for key scrubbing down with water etc complete.

M&L for rendering in 15 mm thick on brick work or concrete surface in cement mortar 1:4 using integral water proofing compound, as per manufacturers instructions, surface even and smooth without using extra cement complete all as specified and direced by Engr-in-Charge. (Note : The cost of WPC is not including in quoted rates and shall be measured and paid separately under respective item only.)

Cleaning of existing glass surfaces by washing,rubbing down and stopping of painted surfaces all as directed by Engineer in charge

M&L for 15 mm thick ready mix plaster on brick or concrete surfaces of wall (External sufaces) in two layers (thickness of each layer not more than 10 mm finished even & smooth. The first layer shall be prepared as per manufacturer instructions, relevant IS code and Engineering practices. The complete work of this item shall be got executed only by a skilled labour of the trade complete all as specified and directed by Engr-in-Charge.

M&L for applying 1.5 mm (average thickness) wall care putty on wall to bring the surface even & smooth complete all as specified and directed by Engr-in-Charge.

M&L for prepartion new decorated external surface of wall and applying two coats of 100% Anti fungal acrylic emulsion exterior grade weather proof paint over a coat of weather resistant acrylic primer complete all as specified and directed by Engr-in-Charge.

Dismantling loose concrete cover of RCC column, beams, Chajjas, parapets, railing and the like as directed without disturbing the core of RCC member, rougheninlg and cleaning concrete surfaces with steel wire brushes,washed with and allowed to dry,including application of rust removing cum passivator painted with brush to the rusted reinforcement (and removing rust with flex after 24hours of application of rust remover with the help of wire brush sand paper) and also applying zinc anti-rust agent as per manufactures method of application to re bar corrosion protection system to reinforcement surface of steel reinforcement with existing reinforcement as directed wherever required binding RCC 100mmX100mm(10 gauge welded mesh) & tack welding after that applying polymer modified cementious bonding coat,prepared and applied on the concrete surface with 1part of sika latex or equivalent in Forsoc/BASF with 4 part of water and 6 part of cement by weight,coverage of sika shall not be more than 0.25Kg/sqm for one coat.Adhesive bond strenght not less that 2.5 mpa,After this,providing 40mm(average thickness) guiniting mix @ pressure 2.2 to 2.5kg per sqcm with anti corrosion admixture (using 1 part of ordinary potland cement 43 grade and 2 part of Ghagger sand mixed with adhesive/admixture at the rate as per manufacturer instruction and as directed) including stripping floating with wooden strippers for proper dimension control necessary .formwork and scaffolding,complete surface of guiniting to be finished fair with 10mm thick plaster in cement 1:4 with water proofing compound @3% by weight of cement cleaning and removing of waste material etc as directed at site.(Welded mesh & addl reinforcement if required measured and paid separetly) Note:- Only steel scaffolding is allowed and rate included in above item.The work shall be carried out by enclosing affected area by green cloth) up to Five Storey building

M&L expanded metal,cut to lengh,bent to shape required of mild steel wire mesh/welded mesh and tying with and including annealed mild steel wire not less than 0.9mm dia binding wire or galvanised wire staples complete to existing reinforcement or steel members.(mesh weight not exceeding 4.00kg/sqm) complete all as specified and directed by Engr-in-charge.

Demolition cement concrete (reinforced)of any description and in any position not otherwise specifically provided for in ground floors and upto 5 storey complete all as specified and directed by Engr-in-charge

M & L for PCC/RCC 1:2:4 type B-1 (using 12.5mm graded stone aggregate) as in lintels upto 1.5m clear span,cills,copings and like incl.weathering,slightly rounded or chamfered angles and throating including formwork (straight or curved) upto 5 storey complete all as specified and directed by Engr-in-charge

Supply only liquid water proofing compound

Removing building materials /old waste unwanted existing material of any description or any type etc. (other than spoil payable under items 03028 to 03031 in Section-3—Earthwork) to a distance of 5km or under, beyond the lead included in the rates, including loading, unloading and stacking at the destination in all respect as specified directed by Engr-in-charge

Cleaning and removing all scale and dirt, etc, from water tanks of any description, and from mouths of circulating pipes etc by using of bleaching powder for cleaning of tank . Capacity of Tank exc 250 ltrs but n.exc 500 ltr each complete all as specified and directed by Engineer in charge

Cleaning and removing all scale and dirt, etc, from water tanks of any description, and from mouths of circulating pipes etc by using of bleaching powder for cleaning of tank . Capacity of Tank exc 500 ltrs but n.exc 1000 ltr each complete all as specified and directed by Engineer in charge Note for Items 1 to 23: 1. These Items will be executed in multi-storeyed buildings up to a height of maximum fifth floors above Ground Level and Rates Quoted for the above items including scaffloding and safety arrangements shall be deemed inclusive of all overheads for executing the work at such heights, no additional claims shall be entertained at any stage of work at any circumstances.

SAWARIYA ENGINEERS AND CONTRACTORS

OMVIN ENTERPRISES LLP

J D ENTERPRISES

DEV CONSTRUCTION

M/S Arvind Electricals