Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹21.1 Laccepted-aoc | accepted-aoc |
Tender Value
₹24.9 L
EMD Value
₹25,000
Closing Date
26 Mar 2026, 9:30 pmClosed
Directorate of Municipal Administration
VIJAYAKUMAR R
Regarding development work in Padayyan hakkal samudya bhavan at w no-71 Hubali
DMA/2025-26/BD/WORK_INDENT51686/CALL-2
DMA/2025-26/BD/WORK_INDENT51686/CALL-2
Reserved
Buildings
Electronic Documents, First(One Cover)
DMA City Corporation Hubballi-Dharawada
10 documents required · 10 mandatory
₹630
₹25,000
26 Mar 2026
10 Mar 2026
23 Mar 2026
Regarding development work in Padayyan hakkal samudya bhavan at w no-71 Hubali
Wall painting with acrylic emulsion paint of approved brand andmanufacture to give an even shade :Two coats on new work afterthoroughly brooming the surface to remove all dirt, dust, mortar dropsand f...
Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 L/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an even ...
Polishing on wood work with ready mixed wax polish of approved brandand manufacture : New work to give an even surface including preparingthe surface after thorougly cleaning oil, grease, dirt and for...
Providing and laying Polished Glazed Vitrified tiles with thickness 10mm in floor with different sizes with water absorption less than 0.08%and conforming to IS:15622, of approved brand & manufacturer...
Providing & fixing factory made PVC Door frame of size 50x47mm witha wall thickness of 5mm, made out of extruded 5mm rigid PVC foamsheet metered cut at corners & jointed 2 No.s of 150mm long bracketso...
Providing & fixing 30mm thick factory made rigid foam Prelam PanelledDoor Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and15x15mm for top & bottom rails, covered with heat moulded Prel...
Suplying and fixing of Door lock
Providing and fixing Steel work welded in built up sections/ framedwork, including cutting, hoisting, fixing in position and applying a primingcoat of approved steel primer using structural steel etc....
Providing and fixing glazing in aluminium door, window, ventilatorshutters and partitions etc. with EPDM rubber / neoprene gasketetc. complete as per the architectural drawings and the directions ofen...
Providing and fixing in position collapsible steel shutters with verticalchannels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size,with top and bottom rail of T-iron 40x40x6 mm, with 40 mm ...
Providing and placing on terrace (at all floor levels) polyethylenewater storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and o...
Providing & fixing 10 mm thick plaster of Paris (gypsum anhydrous) ceilingup to a height of 5 m above floor level, over first class kail wood strips 25x6mm with 10 mm gap in between and reinforced wit...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVCplain & brass threaded fittings, including fixing the pipe with...
Providing and fixing in position fully panelled Honne wood shutters fordoors with stiles and rails of 40mm. thick with bottom and lock rails 180mmwide top rail and stiles 100mm wide as per drawing and...
Providing and fixing Structural Steel work riveted, bolted or welded inbuilt up sections, trusses and framed work, including cutting, hoisting,fixing in position and applying a priming coat of approve...
Providing and fixing precoated galvanised iron profile sheets (size, shapeand pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05 %) total coated thickness with zinc coating 120 g/m...
Providing and fixing precoated galvanised steel sheet roofing accessories0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 g/m2 as perIS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer...
Providing, Laying and Fixing of GI pipes conforming to IS 1239:1990with latest amendments complete with GI fittings (excluding the costof fittings) with cuts and threads wherever necessary, including ...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
KW-2 51686.doc
Tender Document • 1.01 MB
government notification.pdf
Instructions to Tenderers • 1.75 MB
format of bankers certifiate.pdf
Instructions to Tenderers • 0.37 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .