Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹80.0 LAdmitted-Finance | L1 | Admitted-Finance | |
| 2 | L2₹81.9 L+₹1.8 L (2.28%)Admitted-Finance KRISHNA NAGAR NEAR PANI TANKI BOOTY ROAD BARIATU RANCHI 9 | 9 | L2 | Admitted-Finance | |
| 3 | Not Admitted-Fee/PreQual/Technical | - | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
| Sl No | Description | Qty | Unit | LACHHMAN SINGH L2 | Rajendra Kumar Singh L1 |
|---|---|---|---|---|---|
| 1.00 | Dismantling damaged Tiles including all complete job as per direction of E/I. | 42.5 | perM2 | 50 ₹2,125.15 | 48.49 ₹2,060.97 Lowest |
| 2.00 | Providing and laying Rectifieid Ceramic glazed floor tiles of size 300x300 mm(thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigments etc., complete | 10.03 | per M2 | 965 ₹9,681.85 | 962.16 ₹9,653.35 Lowest |
| 3.00 | Providing and laying double charge vitrified floor tiles in different sizes(Thickness to be specified by the manufacture) with water absorption’s less than 0.08% and conforming to IS:15622 of approved make in all colours and shades,laid on20mm thick cement mortar 1:4(1cement:4 coarse sand)including grouting the joints with white cement and matching pigments etc. complete.(size 600x600mm) | 16.81 | perM2 | 900 ₹15,132.6 | 897.72 ₹15,094.26 Lowest |
| 4.00 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing apes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer’s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with12.5 mm thick tapered edge gypsum moisture resistant board | 39.6 | perM2 | 1,305 ₹51,674.09 | 1,304.68 ₹51,661.41 Lowest |
| 5.00 | Supply of 65mm dia G.I. pipe approved quality including all complete job as per direction of E/I. | 30.49 | permtr | 479 ₹14,603.75 | 478.79 ₹14,597.35 Lowest |
| 6.00 | Providing and fixing 18mm thick Gang saw cut mirror polished, pre molded and pre polish machine cut for platforms, vanity counters windows sills, facials etc of required size shade colour, texture over 20mm 20mm thick base cement mortar 1:4(1 cement:4 coarse sand) with joints treated with white cement ,mixed with matching pigment, epoxy touch ups ,including rubbing, curing etc. complete at all levels. Granite Black,area of slab over 0.50sqmm | 10.03 | perM2 | 3,545 ₹35,566.99 | 3,542.83 ₹35,545.21 Lowest |
| 7.00 | Supplying of M.S .Angle 50x50x6mm approved make with royalty,carriage and all taxes all complete job as per specification and direction of E/I. | 0.52 | per M.T | 55,550 ₹28,663.8 Lowest | 55,552.76 ₹28,665.22 |
| 8.00 | Supply of welded mesh including all complete job as per direction of E/I. | 47.57 | perM2 | 250 ₹11,891.5 | 240.24 ₹11,427.26 Lowest |
| 9.00 | Providing and applying plaster of paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete. E/I. | 387.35 | perM2 | 175 ₹67,786.6 | 173.89 ₹67,356.64 Lowest |
| 10.00 | Providing two coats of plastic emulsion paint of approved shade and make over a coat of cement primer over new surface including preparing plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty wherever required, scaffolding washing of floor and taxes all complete as per building specification and direction of E/l. | 387.35 | Per M2 | 190 ₹73,596.88 | 187.02 ₹72,442.57 Lowest |
Tender Value
Refer Docs
EMD Value
₹1.6 L
Closing Date
24 Nov 2020, 11:00 amClosed
Nodal Officer
e-Procurement Cell, Office of the Superintending Engineer, Building Construction Department, Chotanagpur Circle, Line Tank
Renovation of Main Building of Chief Justice Residence at Kanke Road, Ranchi for the Year 2020-21
2020_BCD_46398_1
BCD/SECNC/10/Div No.-1 Ranchi/2020-21 Date 9.11.20
Open Tender
Civil Works
Works
185 days
Ranchi
Please refer Tender documents.
2 documents required · 2 mandatory
₹10,000
E.E. BCD, Building Division No.-1, Ranchi
₹1.6 L
Yes
16 Dec 2020
17 Nov 2020
26 Nov 2020
17 Nov 2020
24 Nov 2020
17 Nov 2020
Amount
Dismantling damaged Tiles including all complete job as per direction of E/I.
Providing and laying Rectifieid Ceramic glazed floor tiles of size 300x300 mm(thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigments etc., complete
Providing and laying double charge vitrified floor tiles in different sizes(Thickness to be specified by the manufacture) with water absorption’s less than 0.08% and conforming to IS:15622 of approved make in all colours and shades,laid on20mm thick cement mortar 1:4(1cement:4 coarse sand)including grouting the joints with white cement and matching pigments etc. complete.(size 600x600mm)
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing apes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer’s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with12.5 mm thick tapered edge gypsum moisture resistant board
Supply of 65mm dia G.I. pipe approved quality including all complete job as per direction of E/I.
Providing and fixing 18mm thick Gang saw cut mirror polished, pre molded and pre polish machine cut for platforms, vanity counters windows sills, facials etc of required size shade colour, texture over 20mm 20mm thick base cement mortar 1:4(1 cement:4 coarse sand) with joints treated with white cement ,mixed with matching pigment, epoxy touch ups ,including rubbing, curing etc. complete at all levels. Granite Black,area of slab over 0.50sqmm
Supplying of M.S .Angle 50x50x6mm approved make with royalty,carriage and all taxes all complete job as per specification and direction of E/I.
Supply of welded mesh including all complete job as per direction of E/I.
Providing and applying plaster of paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete. E/I.
Providing two coats of plastic emulsion paint of approved shade and make over a coat of cement primer over new surface including preparing plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty wherever required, scaffolding washing of floor and taxes all complete as per building specification and direction of E/l.
Providing two coats of plastic emulsion paint of approved shade and make over old surface including washing, cleaning and preparing the walls, scaflolding, washing of floor and taxes all complete as per building specification and direction of E/l.
Providing and applying white cement based birla putty of average thickness 1mm of approved brand for making smooth surface including all complete job as per direction of E/I.
Finishing walls with Acrylic Smooth exterior paint of required shade New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20kg/ 10 sqm)
Finishing walls with Premium Acrylic Smooth exterior paint Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) overexisting cement paint surface with Siliconeadditives of required shade
Suppling, fitting and fixing good quality, well dressed and well seasoned sal wood work in chaukhat in doors, windows, skylight, fanlights and celetial windows openings, including wedge over clamps all complete including application of two coats of wood preservative of approved quality on the surface butting walls and lintels all complete as per building specification and direction of E/l
Supplying , fitting and fixing 38 mm thick good quality well dressed and well seasoned sal wood fully paneled shutters in doors and windows with 25 mm thick panels with one side plain and other side chamfered with oxidised iron fittings such as hinges, sliding door, bolts, tower bolts, handles or rings, hooks and eyes, cleats, sand blocks as per schedule taxes and royalty all complete as per building specification and direction of E/l.
Supplying, fitting and fixing 200x20x6mm. L-type M.S. clamp properly fishtailed, including making holes and setting the same in 250x125x75mm cement concrete block (1:2:4 )with cost of all labour and materials and taxes as per building specification and direction of E/l.
Providing two coats of synthetic enamel paint over a coat of primer of approved shade and make over new wooden surface after cleaning, removing dirt, scales, smokes, grease and sand papering, including cost of scaffolding and taxes all complete as per building specification and direction of E/l.
Supplying, fitting and fixing glass panes including supplying putty, beads and nails after taking out old and broken glass panes and disposal of debris all complete as per building specification and direction of E/l. 4 mm plain.
Providing two coats of synthetic enamel paint of approved shade and make over old wooden surface including cleaning the surface after removing dirt, scales, smokes, grease and sand papering, including cost of scaffolding and taxes all complete as per building specification and direction of E/l.
Providing two coats of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface thoroughly, scaffolding and taxes all complete as per building specification and direcition of E/l.
White washing two coats over old surface with approved quality of lime including cost of cleaning surface thoroughly and removing the scales of smoke and mosh marks with jhama rubbing, scaffolding, washing, of floors and taxes all complete as per building specification and direction of E/l.
Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated 'J' or 'L'hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets hall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified complete job as per specification and direction of E/I.
Supplying materials and labours for constructing inspection chamber of designation class 75 B bricks size 750 mm deep, 600 x 450 internal dimension having 250 mm wall thickness in cement mortar ( 1:6 ) including 12 mm cement plaster ( 1:4 ) with punning on inside and cement plaster (1:6 ) with 600 x 475 mm G.I. cover with frame (Weight not less than 36 Kg.) in foundation and refilling all complete as per specification and direction of E/l.
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion(i)single socketed pipes.
75mm dia
110mm diameter
Providing and fixing on wall face unplasticised PVC moulded fittings, accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring confirming to I:5382 leaving 10mm gap for thermal expansion.
Couplar 75mm dia
Coupler 110mm dia
Single pushfit coupler 75mm dia
Single pushfit coupler 110mm dia
Single Tee with door
75mm dia
75mm dia
110mm dia
Providing and fixing Chlorinated polyvinyl chloride (CPVC)pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i.e. fixing the pipe with clamps at 1.m.spacing.This included jointing of the pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of E/I. concealed work including cutting chases and making good the walls etc.conceled 20mm nominal bore
Providing and fixing Chlorinated polyvinyl chloride (PVC)pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings..This included jointing of the pipes & fittings with one step CPVC solvent cement trencing,refilling & testing of joints complete as per direction of E/I. concealed work including cutting chases and making good the walls etc.(External work) 32mm dia
Dismantling pucca brick or lime work including stacking serviceable materials in countable stacks within 15M. lead and disposal of unserviceable materials with all leads all complete as per direction of E/l.
Earthwork in excavation in foundation trenches in ordinary soil (vide classification of soil item-A) and disposal of excavated earth as obtained to a distance upto 50 M. including all lifts, levelling, ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design, building specification and direction of E/l.
Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including' cost of all materials, labour, royalty and taxes all complete as per building specification and direction of E/l (Mode of measurement compacted volume).
Providing designation 75 B one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/l.
Providing R.C.C.M - 200 with nominal mix of (1:1:5:3) in foundation and plinth with approved quality of stone chips 20 mm to 6mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing (but excluding the cost of reinforcement) taxes and royalty all complete as per building specification and direction of E/l.
Providing R.C.C.M - 200 with nominal mix of (1:1.5:3) in beam with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M 2.5 to 3 including screening, centering, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing (but excluding the cost of reinforcement) taxes and royalty all complete as per building specification and direction of E/l.
Providing designation 75 B brick work in C.M.(1 :6) in superstructure with approved quality of clean coarse sand of F.M. 2 to2.5 including providing 10 mm thick mortar joints cost of screening materials , scafolding , raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/l.
Providing R.C.C.M - 200 with nominal mix of (1:1:3:5) in stiffners with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing (but excluding the cost of reinforcement) taxes and royalty all complete as per building specification and direction of E/l.
Providing R.C.C.M - 200 with nominal mix of (1:1:3:5) in band at lintel level with approved quality of stone chips 20 mm to 6mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing (but excluding the cost of reinforcement) taxes and royalty all complete as per building specification and direction of E/l.
Providing tor steel reinforcement of 8mm. dia. rods as per approved design and drawing excluding carriage of M.S. bars to work site , cutting, bending and binding with annealed wire with cost of wire, removal of rust placing the rods in position all complete as per building specification and direction of E/l. 8mm dia TMT Fe 500 (only valid for sail & TATA steel)(8mm to 10mm dia )
(a) 8mm to 10mm .TMT Fe 500 (only valid for sail & TATA steel)
(b) 12mm .TMT Fe 500 (only valid for sail & TATA steel)
Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l.
Finishing wall with premium acrylic smooth exterior paint with silicone additives of required shade of: New work (two or more coats applied @ 1.43ltr/10sqmm over and including base coat of water proofing cement paint applied @ 2.20kg/10sqm)
Carriage of materials from nearest approved sources of supply including loading into trucks and unloading from trucks and stacking properly at work site as directed by the E/I.
Sand lead 8K.M.
Chips lead 22K.M.
Brick lead 8K.M(1K+7P)
local sand lead 3K.M
Supplying fixing and fitting of Digital Glosey finish wall tiles of Kazaria make(Model-Sierra beige polished finish) 2’0”x1’0” including as per approved by higher authority including all complete job as per building specification and direction of E/I.
S/F/F wall papper of Imarble classic Onyx ties of size 800x1600mm of approved make inculding all complete job as per direction of E/I
Providing and fixing choukhat paneeling with 12mm thick ply and 4mm thick water proof laminte veener both side pasting finishing with allmaterials and labour all complete as per building specification and direction of E/I.
S/F/F all height wall pannelling of 12mm thick watar proof ply(centure panic pine wood,ISI MarkTermites) over 2"x1" aluminium sction,4mm thick waaterr proof vener (green club wood) finishing with malamine polished all complete including all taxes and royalty all complete job as per building specification and direction of E/I.
S/F/FCubboard,Rack,or wall unit file cabinet including allmaterials,labour,taxes all complete as per building specification and direction of E/I.ply Board-19mm thick green,centure or ISI mark water proof ply Grade,outside Laminate:1mm thick green Lam/century Lam, inside Laminate-0.8mm thick Green lam/century Lam channel/soft closing hinge:-Hetich(202 S.S.grade) lock of Furniture:Godrrej/cent,Handle/Jali-Brass/S.S.finish Handel,Door closer-Helix/Ebco/Hettich/Yama(202-SS grade) edge Binding-same Laminate/PVC
S/F/F Board wall partition with Itching Glass vertical standing position including all materials,labour,taxes all complete as pe building specification and direction of E/I.Framing withwooden beat or 19mm thick centue mak wate proof ply Board Both sidee shuteing with 12mm thick wate proof cntur ply veene-4mm thick veene of Green deco makeGlass -5mm thick saint govine glass.
S/F/F wall paper of Elmento make with laying of approved make all complete job as per direction of E/I.
Providing Melamine polish over old surface with melamine sealeemlanine glossey duco thiner,Melamine sprit thiner etc all complete with labour charge for scrapping old paint with paint emoverginder and chesal as required on wooden surface with all materials all complete job as per direction of E/I
Providing and fixing Bamboo Fencing with polishing work with all materials and labour all complete as per building specification and direction of E/I.
Supply of all weather Garden chair one set(1 table and 3 chair) including all materials and labour all complete as per building specification and direction of E/I.
Supply of all weather Garden Tool one set(1 Tool) including all materials and labour all complete as per building specification and direction of E/I.
Poviding and fixing brass letter name plate size 1.75x1.00feet including all materials and labour all complete as per building specification and direction of E/I.
Beautification of Guava Tree(one) including all materials and labour all complete as per building specification and direction of E/I.
Peacock painting & Decoration (on) including all materials and labour all complete as per building specification and direction of E/I.
Repairing of Bamboo Finished R.C.C Hut of size 12'0"x12'0" including repair of columns Roof and P.U.Polishing including all materials and labour all complete job as per direction of E/I
Supply of Footmat approved make size 3'0"x1'6" incuding all complete job as per direction of E/I
Supply and fixing Floor vinayal Flooring of including all mateials and labour all complete job as per direction of E/I
Supply and fixing fitting of Garden Umbrilla size 7'0"x7'0" including all mateials and labour all complete job as per direction of E/I
Supply and fixing fitting of Garden Umbrilla size 8'0"x8'0" including all mateials and labour all complete job as per direction of E/I
S/F/F 8mm thick Green panel make wooden flooring including all mateials and labour all complete job as per direction of E/I
Poviding Jharkhand art (sohrai)painting including all mateials and labour all complete job as per direction of E/I
Supply of Refractory Bricks including loading unloading and carriage upto work site including all complete job as per direction of E/I
Supply and fixing curtain rod including all complele job as per direction of E/I
Supply and fixing curtain Bracket of copper make including all complele job as per direction of E/I
Supply and fixing brass L-drop of size 12" AB make including all complele job as per direction of E/I
Supply and fixing Brass Pull Handel Big HY AB make including all complete job as per direction of E/I
Supply and fixing Brass Tower bolt long neck including all complete job as per direction of E/I
Supply and fixing Brass Handel including all complete job as per direction of E/I
Supply and fixing Brass Hing including all complete job as per direction of E/I
Supply and fixing 25mm dia curtain rod of brass colour including all complete job as per direction of E/I
S/F/F Kolhar make Beitou 3 way thermo trim in C.P. including all complete job as per direction of E/I.
S/F/F Kolhar make Beitou 3 way thermo valve in C.P. including all complete job as per direction of E/I.
S/F/F Kolhar make Escale vanity 1000mm in white including all complete job as per direction of E/I.
S/F/F Kolhar make Escale vanity cabinet in Gloss Grey 1000mm including all complete job as per direction of E/I.
S/F/F Kolhar make Flipside Hand shower in C.P including all complete job as per direction of E/I.
S/F/F Kolhar make Hone Tall Basin mixer in C.P including all complete job as per direction of E/I.
S/F/F Kolhar make July Bib Top 2 way in C.P including all complete job as per direction of E/I.
S/F/F Kolhar make July-Inline valve in C.P including all complete job as per direction of E/I.
S/F/F Kolhar make K-54 Nozzle watertile in C.P including all complete job as per direction of E/I.
S/F/F Kolhar make K-Grid Drain Full Thread in C.P including all complete job as per direction of E/I.
S/F/F Kolhar make K-Hand shower Bracket (9040)in C.P including all complete job as per direction of E/I.
S/F/F Kolhar make K-Inline valve 3/4" in C.P including all complete job as per direction of E/I.
S/F/F Kolhar make K-Luxe Health Faucet in C.P including all complete job as per direction of E/I.
S/F/F Kolhar make Kohler Escale Mirror including all complete job as per direction of E/I.
S/F/F Kolhar make Kohler comp.Angle valve in C.P including all complete job as per direction of E/I.
S/F/F Kolhar make Kohler Rack bolt including all complete job as per direction of E/I.
S/F/F Kolhar make K Rain shower 13" square S.S. including all complete job as per direction of E/I.
S/F/F Kolhar make K Rain shower Arm in C.P including all complete job as per direction of E/I.
S/F/F Kolhar make Nirali waste pipe(Heavy) including all complete job as per direction of E/I.
S/F/F Kolhar make Pressquile wall Hung Bowl including all complete job as per direction of E/I.
S/F/F Kolhar make purreclean seat oval including all complete job as per direction of E/I.
S/F/F Kolhar make strayt Tip Ton spount in C.P including all complete job as per direction of E/I.
S/F/F Kolhar make V-conneection pipe 24"(Hot water) including all complete job as per direction of E/I.
S/F/F Kolhar make kohler sq.soap Dish including all complete job as per direction of E/I.
S/F/F Kolhar make kohler sq.Tumber Holder including all complete job as per direction of E/I.
S/F/F Kolhar make kohler sq.Shelf including all complete job as per direction of E/I.
S/F/F Kolhar make V-Extn.Nipply 6" including all complete job as per direction of E/I.
S/F/F A.O.smith water Heater 50 Litr including all complete job
S/F/F of -ST88158BShower panel(Jaquar Make) including all complete job
Supplying of waste coupling 32mm F.T including all complete job(Model no-Jaguwal ALD-CJR-705)
Supplying and fixing of Towel Rack 24"all complete job(Model no Jaquar CAN-1181FS)
Supplying of Towel ring square shape all complete job(Model no Jaquar CAN-CHR-1121N)
Supplying of Toilet holder with Flap all complete job (Model no Jaquar CAN-CHR-1153S)
Supplying ofgLASS sHLF 600 mm all complete job (Model no Jaquar CAN-CHR-1171N)
Supplying of soap Dish Holder including all complete job.(Model no Jaquar AKP-CHR-35731P)
Supplying of Corner Glass self all complete job (Model no Jaquar CAN-CHR-1173)
Supplying of Bottle Trap all complete job (Model no Jaquar ALD-CHR-769L300X190)
Supplying SOAP Dispenser squar including all complete job.(Model no Jaquar AKP-CHR-35735P)
Supplying of smartflow Han Dryer all complete job(Model no Jaguwar HDR-WT-MO4A)
Supplying of Bib cockk all complete job(Model no Jaguwar FLRR-CHR-5047N)
Providing Jharkhand art (sohrai) painting including all materials and labour all complete job as per direction of E/I
Add 12 % GST (in Basic Rate must fill 12)
Add 1% Labour Cess (in Basic Rate must fill 1)
LACHHMAN SINGH
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .