Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹7.7 LAccepted-Finance | 1 | Accepted-Finance accepted | |
| 2 | 2₹9.1 L+₹1.5 L (18.9%)Accepted-Finance | 2 | Accepted-Finance accepted | |
| 3 | 3₹9.2 L+₹1.5 L (19.3%)Accepted-Finance | 3 | Accepted-Finance accepted | |
| 4 | 4₹9.3 L+₹1.6 L (21.2%)Accepted-Finance | 4 | Accepted-Finance accepted |
Tender Value
Refer Docs
EMD Value
₹16,000
Closing Date
7 Dec 2023, 3:00 pmClosed
The Director,ICAR-CIBA,Chennai-28
The Director,ICAR-CIBA,Santhome high road,R.A.Puram,Chennai-28
Renovation works at CIBA Hqrs,Chennai-28
2023_DARE_782553_1
CIBA/1-5/2023-24/EC/HQRS
Open Tender
Civil Works
Works
45 days
ICAR-CIBA, Chennai-28
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹16,000
Yes
20 Dec 2023
24 Nov 2023
8 Dec 2023
24 Nov 2023
7 Dec 2023
24 Nov 2023
24 Nov 2023 - 7 Dec 2023
Amount
CIVIL WORK
Removable of existing wall panelling,wall pannelling sheet cover and disposal of unserviceable material etc., the rate including the disposal of the debris outside the premises in places approved by the relevant local Govt. authority and usable material to be handover to Engineer In charge (including remove & re-fixingof false ceiling with necessaary arrangments wherever required).
Removable in cement mortar/Granite/ marble/tiles/false ceilings and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.and the rate including cost of all necessary required equipment materials and labour charges etc,. as directed by departmental officer.
Brick work with common burnt clay F.P.S. (non modular) bricks of classdesignation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:4 (1 cement : 4 coarse sand)
15 mm cement plaster on the rough side of single or half brick wall of mix :1:4 (1 cement: 4 fine sand)
Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.
Wall painting with premium acrylic emulsion paint of interior grade New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat
75mm Modular Type Aluminium Partition with 5 No’s of sliding /openable Door (including door stopper, door closer & lock etc.) 2"x1"Metal Fabrication Structure, 75mm Aluminium channel with powder coated, both side 9 mm thick pre-laminated particle board (flat pressed three layer of graded wood particle board conforming to IS:12823) up to 4' (Bottom area) from floor level and the balance 3’ height 5mm thick plain glass. Aluminium sections shall be smooth,rust free straight, metered and jointed mechanically wherever required includingcleat angle, Aluminium snap beading forglazing / panelling, C.P. brass/ stainless steel screws all complete as per drawings and the direction of engineer-in-charge .The rate including cost of all materials and labour charges etc.,as directed by the dept.officers. (The color/design of the particle board,aluminium section will be decide by competent authority)
Providing and fixing fully glazed 12mm thick toughened glass including cutting,making holes,fixing of the necessary fixtures,screws,sealent and SS patch fittings/frame all around the glazing wherever necessary as per the site condtion etc., the rate shall be include necessary etching flim / Logo and removal of existing windows & grills etc.,all inclusive complete
Removal of existing aliminium partion,anodised aluminium sections (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and refixing aluminium partion including transport,necessary stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant,backer rods & EPDM casket, other equipment charges ,labour charges etc., for removal & re- fixing, all complete as per requirement and direction of Engineer-in-charge.
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade One or more coats on old work
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600x600 mm
GST for all the above items in percentage has be given in the cell-M26 and GST amount will be calculated automatically in Cell-BA26.(Evaluation of bid will be made without taking GST)
MEGAM
Glass Laminates
s babu
stage.html
html • 0.04 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .