Repair and Maintenance of Public Health Services in General Pool Houses Sector-46 under maintenance booth Sector-32, U.T., Chandigarh

Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, by machinical/ manual means, ramming of bottoms, for all depth, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :

All kinds of soil

Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :

1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :

Cement mortar 1:4 (1 cement : 4 coarse sand)

12 mm cement plaster of mix :

1:4 (1 cement: 4 coarse sand)

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I.brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :

W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:

White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps

Providing and fixing Stainless Steel A ISi 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :

Kitchen sink without drain board

610x510 mm bowl depth 200 mm

Providing and fixing white vitreous china water closet squatting pan (Indian type) :

Orissa pattern W.C. pan of size 580x440 mm

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.

Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete.

10 litre (full flush) capacity-white

Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete :

White solid plastic seat with lid

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.

Flexible pipe

32 mm dia

Providing and fixing soil, waste and vent pipes :

75 mm diameter :

Sand cast iron S&S pipe as per IS: 1729

Providing and fixing collar:

Sand cast iron S&S as per IS - 1729

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :

100 mm inlet and 75 mm outlet

Sand Cast Iron S&S as per IS- 1729

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.

Internal work - Exposed on wall

15 mm dia nominal bore

20 mm dia nominal bore

Providing and fixing uplasticised PVC connection pipe with brass unions : (DSR Item No.18.21)

45 cm length. (DSR Item No.18.21.2)

15 mm nominal bore. (DSR Item No.18.21.2.1)

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) .(DSR Item No.18.46)

15 mm nominal bore .(DSR Item No.18.46.1)

20 mm nominal bore .(DSR Item No.18.46.2)

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.(DSR Item No.18.48)

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :(DSR Item No.18.49)

15 mm nominal bore. (DSR Item No.18.49.1)

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.(DSR Item No.18.51)

15 mm nominal bore. (DSR Item No.18.51.1)

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931. (DSR Item No.18.53)

15mm nominal bore. (DSR Item No.18.53.1)

Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge.(DSR Item No.18.53A)

Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball.

15 mm nominal bore, 105 mm long, weighing not less than 138 gms

20 mm nominal bore, 120 mm long, weighing not less than 198 gms

Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:

100x100 mm size P type

100x100 mm size P type

Providing and fixing in position best indian Make C.P.Cup heavy Duty Complete in all respects.(minimum weight 15gm) complete in all respects. (As desired by EIC)

Providing and fixing of C.P. Long Bend (1'-4" long) for OWC of size 32mm dia complete in all respect.

Providing and Fixing of HCI 'P' trap 4" dia for OWC complete in all respect.

Providing and fixing of 600x450 or 550x400 mm beveled edge mirror of superior glass (of approved quality) complete with 5 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. (Based on DSR Item No.17.31)

Providing and fixing of C.P.steel grating hole /without hole heavy duty 100mm dia complete in all respect. (As desired by EIC)

Providing and fixing of PVC Pipe line 6 kg/cm2 pressure of approved make including cost of coupler, cement solvent complete except excavation.

Providing and Fixing of C.P. Brass Revolving Joint Shower heavy duty complete in all respect as per entire satisfaction of EIC.

Providing and Fixing of SFRC G.T. Cover and Frame size 375x375x25 mm thick complete in all respect. (Payment of concrete will be made extra)

Providing and Fixing of SFRC I.C. Cover & Frame 600x600x35mm thick complete in all respect. (Payment of concrete will be made extra)

Providing and fixing of PVC fitting for low level cistern complete in all respect.

Conversion of OWC to EWC with 4" C.I. Bend 4" PVC Collar 1 No. 4" PVC Pipe upto 1 ' 6' long including dismantling of OWC pan and floor and repair of flooring to its original conditon complete in all respect to the entire satisfaction of EIC.

Providing and fixing of PVC Handle for low level cistern complete in all respect.

Providing and Fixing of PVC Ball Cock for low level cistern of approved make complete in all respect as per entire satisfaction of EIC.

Providing and Fixing of C.P. Waste 1 1/2 x 6" long for stainless steel sink complete in all respect.

Providing and Fixing of PVC Tank Cover for water storage tanks of different sizes complete in all respect.

Construction of curb consisting of cement concrete 1:2:4 with PVC Pipe 4"6 Kg pressure per cm2 upto average length of 1' including cost of CP hinged grating and cost of sand, bajri etc. complete in al respect.

Providing and fixing of C.P. Brass Spindle (Heavy Duty) for bib taps and pipplar taps weight approx. 110 gms complete in all respect. (As desired by EIC)

Providing drip seal joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter.

Providing and Fixing of C.P. Brass Towel Ring fixed into wall complete in all respects including cutting and making good the walls etc.

Providing and Fixing of C.P. Brass Towel Rail 600 mm long fixed into wall complete in all respects including cutting and making good the walls etc.

Providing and Fixing of C.P. Brass Soap Dish fixed into wall complete in all respects including cutting and making good the walls etc.

Providing and fixing gun metal peet valve, ISI marked for pressure not less than 3kg/cm2 complete in all respects. (As desired by EIC)

15 mm nominal bore

20 mm nominal bore

Please Enable Macros to View BoQ information