Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.9 LAccepted-AOC FLAT NO 4 C GH 39 MANSA DEVI COMPLEX SECTOR 05 PANCHKULA 134 109 HRY | PANCHKULA | PANCHKULA | HARYANA | 134109 | L1 | Accepted-AOC The lowest bidder | |
| 2 | L2₹36.8 L+₹2.9 L (8.54%)Rejected-AOC | L2 | Rejected-AOC Other than the lowest bidder |
Tender Value
₹34.1 L
EMD Value
₹68,240
Closing Date
31 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE JUTOGH
GE JUTOGH, JUTOGH CANTT SHIMLA (HP) - 171008
PROVN OF 09 X ATTACHED TOILETS TO BLDG NO T-61 AT RMS CHAIL UNDER GE JUTOGH
2022_MES_549308_2
GE/JUT-38 OF 2022-23
Open Tender
Civil Works
Item Rate
240 days
RMS CHAIL
CLASS D CATEGORY a (i)
8 documents required · 8 mandatory
₹500
GE JUTOGH
₹68,240
Yes
10 Nov 2022
10 Oct 2022
2 Nov 2022
10 Oct 2022
31 Oct 2022
17 Oct 2022
Amount
Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m deep in hard/dense soil for foundation, etc. or for shafts, wells, cesspits, manholes, pierholes, etc. n. exc 10 sqm in plain and n exc 1.5m in depth and getting out in hard dense soil, complete all as specified and directed.
Cutting opening in cement concrete/ stone masonry walls (any descript-ion) for door, window and other openings (with or without reveals) or enlarging existing openings, including trimming surfaces to receive rendering, etc. complete all as specified and directed.
M&L for PCC 1:4:8, type D-2, using 40mm graded crushed stone aggregate as in foundation filling and mass concrete complete all as specified and directed
M & L for walling of random rubble stone masonry uncoursed well bonded, bedded and solidly hearted built in CM 1:6 complete all as specified and directed.
M&L for Providing precast cement concrete 1:3:6, Type C-1, 20mm graded crushed stone aggregate as in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone walling). corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. and setting in CM 1:6 complete with joints to match complete all as specified and directed.
M&L for PCC 1:2:4, type B-1, using 20mm graded crushed stone aggregate, as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed
M&L for brick work with subclass 'B' bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6, complete all as specified and directed.
M&L for brickwork with sub-class 'B' bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed.
M & L for walling of random rubble stone masonry uncoursed well bonded, built in CM 1:6 as in parapet, steps complete all as specified and directed.
M&L for form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exc 200mm thick (horizontal or sloping in rough finished surfaces of concrete complete all as specified and directed.
M&L for form work to edges of concrete flats, treads, breaks in floor & roofs,concrete railings, n.exc 20 cm wide horizontal or sloping and similar works exc 5cm but n.exc 10 cm wide, roughed finished surfaces of concrete complete all as specified and directed.
M&L for RCC 1:2:4 type B-1 nominal mix using 20mm graded stone aggregate for slab supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified & directed.
S&F MS TMT bar 10mm dia & over, cut to length bent to shape required including cranking, bending spirally for hopping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.
M&L MS TMT bars, 5mm dia and over upto and incl 10mm dia as in stirrups, spacers, binders etc cut to shape requred, incl cranking spirally for hooping for columns, hooking ends binding with and including mild steel wire not less than 0.9mm dia complete all as specified and directed.
M&L for IInd class hard wood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed.
M & L for mild steel bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required, hooks (stay), heavy, for large gates; hook and pintle hinges, large hasps and staples, chains, hand made sliding bolts, clamps, hold fasts, staging for water tanks wall ties, hooks for hanging fans, plain angle cleats for securing purlins to wood trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.
S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.
S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C' channel heaving a PVC sheert strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bbottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.
S&F 3mm thick sheet glass plain ordinary quality and glazing with oil putty in square not exc 0.50 sqm in each pane complete all as specified and directed.
S&F mild steel barrel tower bolt 200mm long stove enameled black with bright bolt complete all as specified and directed
S&F 250mm long mild steel sliding door bolt, plate type, stove enamelled black with bright bolt not less than, 12mm dia with and including 6 boths and nuts four on bolt plate and two on staple plate ISI marked complete all as specified.
S&F butt hinges medium weight cold rolled mild steel powder coated of 100mm size complete all as specified and directed.
S&F 150mm long mild steel pressed handle stove enameled black ovel type complete all as specified and directed
M&L for 15mm thick rendering on fair faces of brick or concrete surface of wall in cement mortar 1:4 mixed with water proofing compound and finish the surface even andsmooth w/o using extra cement complete all as specified and directed.
M&L for 15mm thick rendering on fair faces of brick or concrete surface of wall in cement mortar 1:6 and finish the surface even and smooth without using extra cement complete all as specified and directed.
M&L for glazed ceramic coloured tiles of size 300x450x7 mm thick fixed over and including 10mm thick screed bed in CM 1:4 on vertical surface such as skirting/dado set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to match the existing surface complete all as specified and directed.
M&L for non skid ceramic tiles 7-8mm thick coloured (Square/rectangular) area of each tiles exceeding 0.06 sqm but n exc 0.11 sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and incl 15mm thick screed bed in CM 1:4 complete all as specified and directed.
S&F steel water tubing medium grade galvanised with all fittings and fixed complete to walls, ceiling or laid in floors of 15mm bore complete all as specified and directed.
S & F rotational moulded polyethylene water storage tanks 500 ltrs capacity 3 layered (cylindrical Vertical with closed top) hoisted and fixed in position all as specified in SSR Part 1 etc., complete all as specified and directed.
S&F in repairs ball valves 20mm dia high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe complete all as specified.
S&F 15mm bib taps cast copper alloy with crutch or butterfly handle screwed down for iron pipe complete all as specified and directed.
S & F 15mm pillar tap CP cast copper alloy with capstan head screwed down high pressure with long shank and fly nuts fancy type complete all as specified and directed.
S&F 15mm dia stop valve, cast copper alloy, fency type chromium plated screwed down, high pressure with crutch or butterfly handle screwed both ends for Iron pipe or for unions complete all as specified and directed.
S& F 15mm dia PVC connection pipe with PTMT nuts of length 600mm long complete all as specified and directed.
S&F PVC (SWR) pipes, 110mm dia single socketed in any length with rubber ring joints laid in trenches or in floor complete all as specified and directed
S&F PVC (SWR) pipes, 75mm dia single socketed in any length with rubber ring joints laid in trenches or in floor complete all as specified and directed
S&F PVC (SWR) bends 75 mm bore with access door complete all as specified and directed.
S&F PVC (SWR) bends 110 mm bore with access door complete all as specified and directed.
M&L for 75mm dia cast iron floor trap, with CP grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B-1 (using 20 mm graded crushed stone aggregate) complete all as specified and directed.
M&L for 150mm bore salt glazed stoneware drain pipes Grade 'A', laid in trenches and jointed complete all as specified and directed
M&L for providing concrete bed to 150mm dia drain pipe in PCC 1:3:6 type C-2 using 40mm graded stone aggregate including packing under and haunching against the sides of pipe after they are laid and tested including necessary earth work complete all as specified and directed.
Returning filling in including spreading, levelling watering & well ramming in layers n. exc. 25 Cm thick in each layers complete all as specified and directed.
Removing excavated material to a distence exc 50m but n exc 250m and depositing where directed at a level n exc. 1.50 M above the starting point for any type of soil complete all as specified and directed.
S&F EWC vitreous china wash down water closet pan padestal pattern white with fittings P/S trap fixed with screw complete all as specified and directed.
S&F PVC low level flushing cistern 10 Ltr capacity valveless symphonic action type white as approved with ball valve flat back & handle including brackets complete all as specified and directed.
S&F wash basins, vitreous china (flat back or angle back type) size 550x400mm white , incl cutting for & pinning in ends of brackets or erecting stand, brackets, CP brass waste coupling and waste pipe of standard length complete all as specified and directed.
M&L for loose filling with broken bricks aggregates of gauge 40 to 80mm in soakage pits, soakage wells, complete all as specified and directed.
S & F brass chromium plated tubular towel rail, 20mm dia, D type, 60 cm long between flanges ccomplete all as specified and directed.
M&L for preperation of new plastered or unplastered surface of wall and applying two coats of cement base paint complete all as specified and directed.
M&L for preparation of new plastered surface of wall and applying two coats of oil bound distemper complete all as specified and direceted.
S&F structural steel work as in roof trusses (framed), trussed, purlins crane gantries, rails & fastenings & heavy brackets framimg (Beam, tee, angle, channel or flat section) including distance pieces, cleats etc. Structural steel conforming to Fe-410W, Grade-E 250, Quality 'A' complete all as specified and directed.
M&L for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering/cladding to wall fixed with self tapping screws, complete all as specified and directed.
M&L for point wiring with colour coding multistranded copper conductor cable, PVC insulated (FRLS) and unsheathed size 1.5 sqmm with concealed conduit with fixing accessories, to be fixed , for one light /fan/bell point controlled by one switch with pressed steel concealed terminal boxes covered with 3mm thick laminated sheet incl continous earth wire of PVC insulated unsheathed multi stranded copper conductor cable size 1.5 Sqmm for earth wire connected to common earth dolly, colour code of wires as per specification , complete all as specified and directed.
One 5 pin 5/6 Amp socket on the same board complete all as specified and directed.
One 3 pin 15 Amp socket independent but with 4 sq mm PVC insulated (FRLS) unsheathed copper stranded conductor and earth wire with 4 Sqmm
S & F switch piano type 240 V, 6 Amp , SP one way flush type complete all as specified and directed.
S&F socket 5 pin, 6 Amp, flush type piano (multi purpose) complete all as specified and directed.
S&F Socket 15 Amps flush type, 3/6 pin, 230 Volts , AC complete all as specified and directed.
S&F switch 15 Amps flush type 230 Volts , AC complete all as specified and directed.
S&F ceiling rose surface backelite, 65 x 50 mm three terminal complete all as specified and directed.
S&F lamp holder PVC/ Polycarbonate type with back plate suitable for LED Lamp, incl LED Bulbs 9/10W B-22 Pin type, complete all as specified and directed
S&F in repair LED mirror light 10 watt with diffuser, decorative type with driver duly electrical connection from ceiling rose to fittings complete all as specified and directed. Make : Havells cat part No ENDURALINEARNEOBS10WLED865SPCWH/ Polycab Cat Part No. LDO0103021/ Crompton Cat Part No. LCL-10-CDL
M&L for submain wiring with 2X6 Sqmm +1X6 Sqmm Earth Wire single core PVC insulated FRLS sheathed copper cable connecting to common earth dolly in and including heavy duty PVC casing-N-caping complete all as specified and directed. Note: Three run of 6sqmm wire and 1 Run of PVC casing-N-caping shall be measured as One RM
S & F single pole and neutral sheet metal enclosures for Distribution board (DB's)suitable for MCBs fitted with bus bar , Neutral link ,Earth Bar and Din rail 240 V, 50 Hz supply double door SP&N DB system 08 ways complete all as specified and directed.
S&F MCB SPN 6 to 32 Amps 240V incl all termnials, fitting etc. complete all as specified and directed.
S&F MCB SP 6-32 Amp, 240 Volt incl all termnials, fitting etc. complete all as specified and directed.
S&F exhaust fan, MS body AC single Phase. 230V of size 280/300m sweep 900 RPM, blades, and frame and louvers shutter with fastner nut bolts washer etc complete including eletrical connection with copper cable from ceiling rose to exhaust fan complete as specified and all as directed.
M&L for service connection with 6 sqmm twin core weather proof aluminium conductor cable suspended with 8 SWG GI Wire from pole to service bracket incl 40mm GI Pipe service bracket, complete all as specified and directed.
S&F LED building secuity light 35 watt made up of pressure die cast aluminium housing with mid power LED as lightining source and PC cover having top opening inbuilt LED driver with IP66 protection and impact resistance of IK-07 complete including GI bracket with nut bolts, washers etc including electrical connection with copper cable from ceiling rose to fittings incl taking down old unserviceable light fittings of any type and any size complete all as specified and directed. Make : Havells cat part no: ENDURA CITY LITE PLAT PLUS SL35W LED 757 SASYBOPC, POLYCAB CAT PART NO PCGLS T1 35 N or equivalent in Appx 'A' list of makes .
S & F Water heater storage type, electric supplied of capacity 25 litres minimum 5 stars rating ,8 Bar Pressure , including all accessories and fitting etc. complete all as specified and directed.
S& F 15mm dia PVC connection pipe with PTMT nuts of length 300mm long complete all as specified and directed.
M&L for earthing complete with copper earth plate 600x600x3.15 mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 meters below normal ground level, connected to copper strip 20x3 mm as Earthing lead by means of bolts, nuts, check-nuts, and washers of galvanized iron or steel besides welding at all joints as shown in drawings and including excavation and earth work, GI pipe medium grade 40 mm bore for protection of GI strip from earth electrode to and including the earth test point of galvanized Iron/steel of size 75x75x 25mm, supplying and laying charcoal dust, common salt, PCC 1:2:4 type B1 chamber and MS angle iron frame 40x40x3mm and RCC cover 40mm thick (1:2:4) type B1 using 20mm graded stone aggregate reinforced with 6 mm dia round bars @ 75mm C/C both ways with MS handle 12mm dia, PGI funnel and wire mesh, 20 mm dia GI pipe medium grade for watering all as shown in Plate No. 3 of SSR Part I of 2009 and connected to earth test point including testing complete all as specified and directed. Note: (i) Rate of Earth work, Earthing electrode, all connections, nut-bolts, washers, complete labour, testing, Earth lead upto 7.5 mtr, char coal dust, common salt, porcelain insulator, PCC earth Pit, CI frame ,RCC cover, funnel with wire mesh are incl in quoted rate and watering pipe, earth lead protection pipe, test poit, earth lead exceeding 7.5 mt are measured and paid separately.
SYNDICATE BUILDERS
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .