Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.9 LAccepted-AOC | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹39.4 L+₹7.4 L (23.3%)Rejected-AOC | L2 | Rejected-AOC Other than Lowest | |
| 3 | L3₹40.2 L+₹8.3 L (26.0%)Rejected-AOC | L3 | Rejected-AOC Other than Lowest | |
| 4 | L4₹41.1 L+₹9.2 L (28.9%)Rejected-AOC H NO 177 GOVINDPURA SATWARI JAMMU CANTT 180003 J K | JAMMU | JAMMU AND KASHMIR | 180003 | L4 | Rejected-AOC Other than Lowest | |
| 5 | L5₹42.1 L+₹10.2 L (32.0%)Rejected-AOC | L5 | Rejected-AOC Other than Lowest |
Tender Value
₹50 L
EMD Value
₹1 L
Closing Date
11 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
COL S PRADEEP
Military Engineer Services, HQ Commander Works Engineer Jammu, PIN-900172
REHABILITATION OF TEMP BLDGS INCLUDING GALVALUME SHEET AND ROOF AT CERTAIN BLDGS IN ZONE B AREA AT MIRAN SAHIB UNDER GE JAMMU
2023_MES_575306_1
CWE/JP-72/2022-23
Open Tender
Civil Works
Item Rate
120 days
GE JAMMU
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GE JAMMU
₹1 L
Yes
16 Feb 2023
16 Jan 2023
13 Feb 2023
16 Jan 2023
11 Feb 2023
30 Jan 2023
Amount
Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards / slabs / blankets, any thickness any type including cover fillets, complete all as specified and directed by Engr-in-Charge
Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre, complete all as specified and directed by Engr-in-Charge
4mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Alumi?nium framework with screws, complete all as specified and directed by Engr-in-Charge
Dismantling timber scantlings 40 sq. cm and over in section, in any position, complete all as specified and directed by Engr-in-Charge
Dismantling timber scantlings in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section, complete all as specified and directed by Engr-in-Charge
Demolition of brick work or stone masonry built in cement mortar including all quoins arches, pillars etc but excluding ashlar facing, dressed stone work and precast concrete articles, complete all as specified and directed by Engr-in-Charge
Brick work with old size sub class 'B' bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6, complete all as specified and as directed by Engr-in-Charge.
Dismantling wrought iron or mild steel work of any description not otherwise provided, complete all as specified and directed by Engr-in-Charge
Rolled mild steel (structural) grade E 250 (Fe 410W quality -A) in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, leats etc., complete all as specified and as directed by Engr-in-Charge.
Mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240, complete all as specified and as directed by Engr-in-Charge.
Rolled mild steel in plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment as in gusset plate, base plate, conforming to Fe 410-W, de E-250 Quality 'A', complete all as specified and as directed.
Dismantling AC corrugated, semi corrugated sheets in roof covering including ridge, complete all as specified and directed by Engr-in-Charge
Asbestos cement sheeting 6 mm thick, corrugated or semi-corrugated sheets in roofs, wall etc. fixed with L-type or J-type or cranked hook bolts, complete all as specified and directed by Engr-in-Charge
Asbestos cement two piece adjustable serrated ridge 6mm thickness to suit corrugated or semi corrugated sheets fixed with L-type or J-type or cranked hook bolts, complete all as specified and directed by Engr-in-Charge
Supply and fixing pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 MPs as in roof covering fixed with self tapping screws or L-type or J-type or cranked hook bolts, complete all as specified and directed by Engr-in-Charge
Supply and fixing pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 MPs as in ridge of roof fixed with self tapping screws or L-type or J-type or cranked hook bolts, complete all as specified and directed by Engr-in-Charge
Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed by Engr-in-Charge
Rendering 10 mm thick in CM 1:4 on concrete surface such as soffits of RCC slab, chajja, roof projection etc finished even and smooth without using extra cement including mixing of water proofing compound complete all as specified and as directed by Engineer-in-Charge of height upto 12 metre. Note: - Water proofing compound shall be measured and paid separately.
Rendering 15 mm thick in CM 1:6 on other than fair faces of brick work or concrete surfaces finished even and smooth without using extra cement, complete all as specified and directed by Engr-in-Charge
Rendering 15 mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even and fair without using extra cement including mixing of water proofing compound, complete all as specified and directed by Engr-in-Charge Note: - Water proofing compound shall be measured and paid separately.
Material and labour for preparation of new / old surface and applying two coats of oil bound distemper, complete all as specified and directed by Engr-in-Charge
Material and labour for preparation of new / old plastered surface and applying two coats of cement based paint, complete all as specified and directed by Engr-in-Charge
Material and labour for preparing surface of new steel of any description over 10cm width and girth, not otherwise described and treated with two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed by Engr-in-Charge
Material and labour for preparing surface of old steel material of any description over 10 cm width or girth treated with one coat of synthetic enamel paint, complete all as specified and directed by Engr-in-Charge
supply and fixing 15 mm bore steel tubing, medium grade, galvanised with all fittings and fixed complete to wall and ceiling or laid in floors including taking up or down and water tightness test, complete all as specified and directed by Engr-in-Charge
supply and fixing 20 mm bore steel tubing, medium grade, galvanised with all fittings and fixed complete to wall and ceiling or laid in floors including taking up or down and water tightness test, complete all as specified and directed by Engr-in-Charge
Supply and fixing in repairs Gun metal, globe or gate valve with iron wheel head, 20 mm bore, screwed both ends for iron pipe, complete all as specified and directed by Engr-in-Charge
Supply and fixing in repairs Gun metal, globe or gate valve with iron wheel head, 15 mm bore, screwed both ends for iron pipe, complete all as specified and directed by Engr-in-Charge
Dismantling floor, hearth or wall tiling including cement mortar bedding, removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed by Engr-in-Charge
M&L for removal of existing treatment of the entire roof surface, complete all as specified and directed by Engr-in-Charge
Rendering 10mm thick in CM (1:3) (using 100% coarse sand) on roof surface including water proofing compound as per manufacturer's instructions, complete all as specified and directed by Engr-in-Charge
Applying a coat of bituminous primer conforming to IS : 3384-1986 @ 1.2 Iitres / sqm on prepared surface and allowed to dry, complete all as specified and directed by Engr-in-Charge
APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application, complete all as specified and directed by Engr-in-Charge
15mm thick cement screed bed in CM 1:4 for laying floor finishes, complete all as specified and directed by Engr-in-Charge
Cement concrete tiles 25cm x 25cm x 20-22mm thick, machine pressed; set jointed and pointed with grey cement no pigment in neat cement slurry in floors, and cut and polished, complete all as specified and directed by Engr-in-Charge
Material and labour for two coats of aluminium paint on membrane surface, complete all as specified and directed by Engr-in-Charge.
Supply only liquid water proofing compound, complete all as specified and directed by Engr-in-Charge
Supply and fixing 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, bends, Tees complete fixed to walls at any height and includingTaking down eaves gutters and rain water pipes (any size or pattern), complete all as specified and directed by Engr-in-Charge
Supply and fixing 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, bends, Tees complete fixed to walls at any height and includingTaking down eaves gutters and rain water pipes (any size or pattern), complete all as specified and directed by Engr-in-Charge
Supply and fixing in repair PVC (SWR) bends 110 mm radius, complete all as specified and directed by Engr-in-Charge
Supply and fixing in repair 110 mm PVC (SWR) junction single (T) equal / unequal, complete all as specified and directed by Engr-in-Charge
Supply and fixing in repair PVC (SWR) bends / shoes any radius of 75 mm dia, complete all as specified and directed by Engr-in-Charge
Supply and fixing in repair PVC (SWR) bends any radius provided with access door of 110mm dia , complete all as specified and directed by Engr-in-Charge
Supply and fixing in repair PVC (SWR) bends any radius provided with access door of 75mm dia , complete all as specified and directed by Engr-in-Charge
Demolition cement Concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level), complete all as specified and directed by Engr-in-Charge
75mm thick PCC (1:3:6) type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection etc finished even and smooth without using extra cement, complete all as specified and directed by Engr-in-Charge
Cement concrete 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in roof kerbs rounded or chamfered on edges, complete all as specified and directed by Engr-in-Charge
JK BUILDERS AND DEVELOPERS
Kanwal Nain Behl
M/S A TO Z ENGINEERS
M/S PARAMJEET SINGH
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .