Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.7 LAccepted-AOC WARD NO 1 HOUSE NO 04 SUBASH NAGAR UDHAMPUR 182101 J K | UDHAMPUR | UDHAMPUR | JAMMU AND KASHMIR | 182101 | L1 | Accepted-AOC L1 bidder | |
| 2 | L2₹51.4 L+₹16.7 L (48.2%)Rejected-Finance | L2 | Rejected-Finance Othar than lowest |
Tender Value
₹36.9 L
EMD Value
₹73,800
Closing Date
15 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE(I) 873 EWS
Garrison Engineer (Indep) 873 Engineer Works Section PIN 913 873 C/O 56 APO
PROVN OF WATER SUPPLY TO BTC-I AND BTC-II AREA AT CBS BHALRA MIL STN UNDER GE (I) 873 EWS
2023_MES_576307_1
NIT-69 of 2022-23
Open Tender
Civil Works
Item Rate
270 days
Bhaderwah
As per NIT
7 documents required · 7 mandatory
₹500
GE(I) 873 EWS
₹73,800
13 Mar 2023
20 Jan 2023
18 Feb 2023
20 Jan 2023
15 Feb 2023
27 Jan 2023
Amount
Excavating in trenches in any type of soil, not exceeding 1.5m wide and not exceeding 1.5m in depth and getting out, complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and directed.
Removing excavated soils not exceeding 50 metres and depositing where directed at a level not exceeding 1.5metre above the starting point, complete all as specified and directed.
Excavation in post holes (or similar holes) each not exc. 0.50 cum, in any type of soil and getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers not exc. 25cm, watering and removal of excavated materials to a distance n. exc. 50m and making good surfaces, complete all as specified & directed.
100mm thick Plain Cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in floor including necassary formwork complete all as specified and directed.
Plain Cement concrete 1:2:4, type B-2 (using 40mm graded crushed stone aggregate) as in foundation filling, basement and mass concrete for bends, pipe support, complete all as specified and directed.
Preparation of new steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint, over a coat of red oxide primer, complete all as specified and directed.
Demolition of cement concreteof any description in any position not otherwise specifically provided complete all as specified and directed.
Plain Cement concrete 1:4:8, type B-2 (using 40mm graded crushed stone aggregate) as in foundation filling, basement and mass concrete for bends, pipe support, complete all as specified and directed.
PP-R (Poly Propylene random co-polymer) pipe of followinf sizes PN-16 (SDR-7.4) IS-15801, 3-layer (outer green coloured UV stabilized, middle black coloured UV stabilized and innermost layer white coloured with anti-microbial property) having thermal stability for hot & cold water supply with and including all necessary PPR plain and brass threaded fittings, laid in trenches complete all as specified & directed.
(a) 110 mm bore
(b) 90 mm bore
(c) 63 mm bore
(d) 40 mm bore
(e) 32 mm bore
(f) 25 mm bore
Making connection of PP-R distribution branch with PP-R main of following sizes by providing and fixing tee including cutting and making fusion joint etc.complete of following sizes :-
(a) 16 to 40 mm bore
(b) 50 to 110 mm bore
Stainless Steel (SS) Sluice Valve class PN-1.6, PD short body conforming to IS:14846-2000, heavy duty, both ends flanged with stainless steel spindle & check nut, operating wheel, all nuts, bolts, washers, gaskets etc. of following description, complete all as specified & directed. Make : Advance / BIR/ Leader/ Sant /RAMCO
(a) 100 mm bore
(b) 80 mm bore
Air release valve with double chamber of 50mm bore conforming to IS 14845 complete all as specified and directed. Make : Advance / BIR/ Leader/ Sant /RAMCO
PP-R Gate valves (brass insert) as per requirement of the site all as directed for the followig sizes:-
(a) 63 mm bore
(b) 40 mm bore
(c) 32 mm bore
(d) 25 mm bore
Masonry Valve Pit with PCC 1:4:8 type D-2 as in foundation, Brick Work 23cm thick in CM 1:4, 15mm thick plaster in CM 1:4 internally and flush pointing in same mortar as the work proceeds externally, 40mm thick flooring in PCC 1:2:4 type B-1 laid over 75mm thick hard core, top cover shall be made out of MS sheet 10 SWG thickness fixed in angle iron frame made out of angle size 40 x 40 x 6mm with 12mm dia handle and two number hinges on one side and locking arrangement at other side complete including painting with two coats of sythetic enamel paint over a coat of red oxide primer, complete including earth work, excavation, disposal of surplus spoil not exceeding 50m all as specified and directed of the following sizes :-
(b) 600mm x 600m x 600mm (internal dimension of chamber)
Rotational moulded polythene water storage tank, white coloured, tripple layer cylindrical vertical with closed top 1000 litre capacity hoisted and fixed in position complete all as specified and directed. (Make : SINTEX / ROTEX / POLYWELL / POLYCON)
Rotational moulded polythene water storage tank, white coloured, tripple layer cylindrical vertical with closed top 750 litre capacity hoisted and fixed in position complete all as specified and directed. (Make : SINTEX / ROTEX / POLYWELL / POLYCON)
Rotational moulded polythene water storage tank, white coloured, tripple layer cylindrical vertical with closed top 500 litre capacity hoisted and fixed in position complete all as specified and directed. (Make : SINTEX / ROTEX / POLYWELL / POLYCON)
Plug type Bib taps 15mm bore of cast copper alloy (ISI marked) screwed down, high presure, screwed both ends for iron pipe or for brass ferrule, complete all as specified and directed. (Make : JAQUAR / ROCA / KOHLAR/ CERA / MARC)
Hardcore of broken stone gauge exceeding 63mm and not exceeding 100mm deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surfaces, complete, all as specified and as directed.
Compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc. Fe- 290 (Gde E- 165) complete, all as specified and as directed.
Brass ball valve 20mm, high pressure with polyethelyne float and fly nuts for iron pipe or brass ferrule complete all as specified and directed.
S&F for FRP water storage tank 25000 Ltrs capacity FDA approved rust proof and leak proof inciuding polyurethere insulation of tichness 50 mm FRP tank and inlet, outlet connection all as specified and directed. Make sintex or equivalent approved make. Note : (a) The tank shall be made of Glass/Polyster (Food grade polyster Resin) (b) Working temparture +55 deg C to -15 Deg C. (c) Inner dia not less than 3.3M and shall height not more than 4.0 M with a conical top and attached with MS ladder (d) tank shall rest on entire bottom on 150 mm sand for uniform distributed olad (qty of sand shall be measured and paid separately)
Flanged/spigot end fittings suitable for fixing of sluice valve and PP-R pipe to the existing pipe line of any tfor making branch connection including nut bolts and washers complete all as specified and directed for the following:-
(a) Suitable for 100 mm bore sluice valve
(b) Suitable for 80 mm bore sluice valve
Rendering 15mm thick in cement mortar 1:6 on other than fair face of brickwork or on one side of lathing, finished even and smooth without using extra cement, complete all as specified.
Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete, all as specified and directed.
150mm thick Plain Cement concrete 1:2:4, type B-2 (using 40mm graded crushed stone aggregate) as in floor or paving complete all as specified and directed.
55mm thick Plain Cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in floor or paving, finished the surfaces even and smooth complete all as specified and directed.
Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6m mean radius built in in CM 1:6, complete all as specified and directed.
Sand filling under floors including watering, ramming and consolidation complete all as specified.
Stainless Steel (SS) non return Valve 100mm bore without by-pass arrangement, swing type, conforming to IS:5312, flanged ends, all nuts, bolts, washers, gaskets etc. dismantling of old unserviceable NRV complete all as specified & directed. (Make : Advance / BIR/ Leader/ Sant /RAMCO)
SWASTIK TRADERS
Bidder Name
SWASTIK TRADERS
DAVINDER SINGH
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .