PERIODICAL SERVICES FOR PAINTING OF EXTERNAL SURFACES INCLUDING CHAJJA REPAIRS WITH GUNNITING REPAIR REPLACEMENT OF JOINERIES PLASTERING TO OFFRS KLP AND ADJACENT AREAS UNDER AGE BR II AT DIPATOLI MIL STN

Amount

Taking down chowkhats or frame with shutter (without taking off shutter from frame) area n.exc 1.50 Sqm each complete including removing from site complete all as specified and as directed.

Taking down chowkhats or frame with shutter (without taking off shutter from frame) area exc 1.50 Sqm but n exc 4.0 sqm each complete including removing from site complete all as specified and as directed.

Taking down shutters of any description area exc 1 sqm and n exc 2 Sqm each complete all as specified and as directed.

Taking down shutters of any description area exc 2 sqm and n exc 4 Sqm each complete all as specified and as directed.

M&L plain, solid, straight chowkhat and frames, wrought, framed, rebated on the solid rounded or chamfered put together with glue, pinned at joint for 2nd class hard wood complete all as specified and as directed.

M&L for 35mm thick 2nd class HW rail and style plain framed, factory made paneled shutter (one panel) without interlocking rail and 12mm veneered particle board with commercial veneering on both faces, the size of rail and style as per IS -1003 (Pt-I) kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 2nd class HW glazed and skelton 35mm thick shutters, open rebated and prepared to receive glass gauze etc (with out sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, gauze etc complete all as specified and as directed.

S&F solid PVC door frame of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube S&F in opening all as shown on drawing and specified.

S&F factory made solid panel PVC door shutter 30 mm thick style consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheets strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail and bottom rail on either side and as gap inside for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in the MS frame welded/seated to the stiles and rail with suitable PVC sheet bending and jointed to gather with solvent cement supplying and fixing in the frame at site as per specification and drawing with and including 3 Nos but hings 100 mm long for each door complete all as specified and as directed.

S & F 30mm thick flush shutters, solid core construction with block boards core and plywood face panels, commercial type on both sides complete all as specified and as directed.

M & L for powder coated anodized aluminium window frame 3 track channel with double sliding shutters one with 5.5 mm thick plain glass and other with stainless steel 0.56 mm nominal dia of wire and average width of aperture 1mm fixed including jointing cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws and suitable aluminium fittings such as suitable aluminium handle, hinges etc complete all as specified and as directed. Note:- The aluminium sections shall be conforming to catelogue of ' JINDAL' or equivalent make as per list of make are as under:-. a) Bottom frame rail 20620 b) Top frame and vertical 20621 c) Handle side 20606 d) Shutter inter lock 20724 e)Shutter top & bottom 20844 f) Glazing clip 19352

S&F anodised aluminium ventilator louver type with locking arrangement moving up and down with frame of aluminium section weighting not less than 0.55 Kg/mtr including necessary joining cleats, glazing clips, 10 cm wide, 4mm thick frosted glass, rubber packing, anodised aluminium snap beading, screws etc complete all as specified and as directed.

M&L for cutting holes on brick wall in cement mortar for inserting hold fast and making good for dismantled portion in CM (1:3) or PCC (1:2:4) in wall exc ½ brick & n.exc one brick thick complete all as specified and as directed.

M&L for MS flat iron of size 25 mm x 3 mm for hold fast confirming to Fe-290 or Fe E-165 complete all as specified and as directed.

S&F steel windows double shutters, one glazed and other flyproof shutter, side hung, including projecting type hinges with steel handles and steel peg stay complete with glazing bars dovetailed or welded complete with and including 12mm square guard bars as specified in relevent IS complete all as specified and as directed.

Description all as per srl item No. 15 here in before but without glazing bars complete all as specified and as directed.

S & F steel ventilator with top hung shutter including hinges steel peg stay complete all as specified and as directed.

S&F frame work such as grills, grating etc with ends of bars, shouldered and or rivetted or forged into spikes, framed guard bars, barred iron doors, ladders etc and similar works conforming to Fe-290 Gd E-165 complete all as specified and as directed.

S&F in repair casement stays of size 300mm with hinged joint and two plates, with studs with nickel anodised complete all as specified and as directed.

S&F in repair steel handle nickel anodised 150mm long with joints for steel window complete all as specified and as directed.

S&F in repair 300 mm rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

S&F in repair 150mm length floor door stopper of aluminium alloy body and tongue, anodized, with hard drawn steel spring, complete all as specified and as directed.

Easing and adjusting to steel window and straight the member of and oiling to hinges complete all as specified and as directed.

Description all as per srl item No. 23 but wooden doors & windows complete all as specified and as directed.

S&F in repair 100mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and as directed.

S&F in repair 200mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and as directed.

S&F in repair 300mm long aluminium alloy, anodised sliding door bolt with hasp, staple or embedded section and fixing bolt and sliding bolt of embedded sections or cast aluminium alloy complete all as complete all as specified and as directed.

S&F in repair 75mm butt hinges medium weight cold rolled MS complete all as specified and as directed.

S&F in repair 100mm butt hinges medium weight cold rolled MS complete all as specified and as directed.

S & F 150mm aluminium handle, cast type anodised complete all as specified and as directed.

S&F in repair hasp and staples, safety type with aluminium anodised hinge pin including bolt to hinge plate and fixed with screws of length 100mm complete all as specified and as directed.

S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm for steel window/wooden faces fixed with stainless steel wire staples complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frames, glazed with putty or fixed with beads complete all as specified and as directed.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in square area n.exc. 0.5 Sqm in each pane complete all as specified and as directed.

S & F 3 mm thick figured glass or pin headed type and glazing with oil putty area n exc 0.5 Sqm in each pane complete all as specified and as directed.

M&L for taking down cement plaster from concrete surfaces of chajjas not exceeding 60 cm in width and plastering the same with CM (1:3) on chajjas in two layers 5mm thick backing coat and 10mm thick finishing coat with and including removing cracked plaster and concrete including cleaning of visible reinforcement and treating them with cement slurry also necessary repair to cracked concrete by fixing chicken wire mesh 25mm gauge if any with cement concrete (1:2:4) Type B-0 using 12.5mm graded stone aggregate including necessary scaffolding work for double/single storey bldgs complete all as specified and as directed.

Taking down cement plaster on brick wall or concrete surface etc including raking out joints, hacking for keys, scrubbing down with water etc complete all as specified and as directed.

M & L for rendering 15 mm thick on fair faces of bricks/concrete surface in cement mortar (1:6) on wall finishing the surfaces even and smooth without using extra cement complete all as specified and as directed.

M & L for rendering 15 mm thick on fair faces of bricks/concrete surface in cement mortar (1:4) with using WPC on wall, finishing the surfaces even and smooth without using extra cement complete all as specified and as directed. NOTE:- WPC shall be measured and paid seperately under respective item of Schedule 'A' / BOQ.

Supply only integral water proofing compound complete all as specified and as directed.

M&L for preparing the new plastered surfaces of wall and applying two coats of cement based paint over a coat of primer complete all as specified and as directed.

M&L for preparing the old surfaces by complete removal of existing treatment and applying two coat of cement based paint over a coat of primer on walls/ borders complete all as specified and as directed.

M&L for applying two coats of synthetic enamel paint over one coat of pink primer on new wooden surfaces of any description not otherwise described over 10cm width or girth including preparation of new surface complete all as specified and as directed

M&L for applying one coat of synthetic enamel paint on old painted wooden surfaces of any description not otherwise described over 10cm width or girth including preparation of surface complete all as specified and as directed

M&L for preparing the newly surface of any description not otherwise described over 10 cm width or girth on steel surface and applying two coats of synthetic enamel paint over one coat of zinc chromate primer complete all as specified and directed

M&L for preparing the old surfaces of any description not otherwise described over 10 cm width or girth on steel surface and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for three coats of white wash on newly plaster wall surfaces complete all as specified and as directed.

M&L for preparing new plastered surfaces of walls and applying two coats of oil bound distempering over a coat on primer complete all as specified and as directed.

Taking up or down steel tubing and connection including cleaning for refixing or removal to store of dia 15mm bore complete all as specified and as directed.

Taking up or down steel tubing and connection including cleaning for refixing or removal to store of dia 20mm bore complete all as specified and as directed.

Taking up or down steel tubing and connection including cleaning for refixing or removal to store of dia 25mm bore complete all as specified and as directed.

S&F for 15mm bore steel tubing and connection tubing in new or old position to walls, ceiling, floors etc including all fitting such as socket, elbow, nipple, union etc complete all as specified and as directed.

Fixing only 15mm bore steel tubing and connection tubing in new or old position to walls, ceiling, floors etc including all new fitting such as socket, elbow, nipple, union etc complete all as specified and as directed. Note:- Old GI pipe shall be retrieved from Srl item No. 49.

S&F for 20mm bore steel tubing and connection tubing in new or old position to walls, ceiling, floors etc including all fitting such as socket, elbow, nipple, union etc complete all as specified and as directed.

Fixing only 20mm bore steel tubing and connection tubing in new or old position to walls, ceiling, floors etc including all new fitting such as socket, elbow, nipple, union etc complete all as specified and as directed. Note:- Old GI pipe shall be retrieved from Srl item No. 50.

S&F for 25mm bore steel tubing and connection tubing in new or old position to walls, ceiling, floors etc including all fitting such as socket, elbow, nipple, union etc complete all as specified and as directed.

Fixing only 25mm bore steel tubing and connection tubing in new or old position to walls, ceiling, floors etc including all new fitting such as socket, elbow, nipple, union etc complete all as specified and as directed. Note:- Old GI pipe shall be retrieved from Srl item No. 51.

S&F in repair 15mm bore stop valves, cast copper alloy, fancy type, chromium plated with long shank and cup (concealed type) complete all as specified and as directed.

S&F in repair 20mm bore stop valves, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both end for iron pipe or for unions complete all as specified and as directed.

Dismantalling of existing water tanks and removing to store and S&F 1000 ltrs capacity rotational moulded polythylene water storage tank three layered (cylindrical vertical with closed top) hoisted and fixed in position with and including 20 mm dia of ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and as directed.

Dismantalling of existing water tanks and removing to store and S&F 500 ltr capacity rotational moulded polyethylene water storage tank three layered (cylindrical vertical closed top) hoisted and fixed in positions complete all as specified in SSR Part-I, with and including 20 mm dia of ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and as directed.

S&F in repair ball valve high pressure with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed of size 20mm bore complete all as specified and as directed.

S&F in repair plastic cover of plastic water tank suitable for capacity of 500/1000 litres including hinges and bolt for locking arrangement complete all as specified and as directed.

M/s Ray construction

Delhi Enterprises

M/s R R MUKHERJEE & CO