SPL REPAIR TO BLDG NO P-25A AT 25 WEU AND SPL REPAIR TO EXTERNAL SURFACE ROOF TREATMENT EARTHING SYSTEM AND CONNECTED WORK OF BLDG NO P-130 AT HQ CENTRAL COMD UNDER GE (EAST) LUCKNOW

Demolition of brick work or stone / boulder masonry including all quoins, arches, pillars, etc. built in cement mortar or cement lime mortar complete all as specified and directed.

M&L for brick work with modular fly ash bricks, straight or curved on plan exc 6m mean radius in CM 1:6 complete all as specified and directed.

Demolition of cement concrete (un-reinforced) any description and laid in any position complete all as specified and directed.

M & L for 75 mm thick cement concrete 1:3:6 type C-2, using 40 mm graded stone aggregate as in plinth protection laid to slop of 1:12, finished surface even and fair without using extra cement with and including all necessary form work to divide the area in panels, finishing exposed edges fair or rounding or chamfering where directed and providing 6 mm wide joints through out the thickness of plinth protection duly filled with mastic filling (one part of hot bitumen 85/25 and three part of fine sand by weight) complete all as specified and directed.

Demolition of cement concrete (reinforced) in ground floor and paving n.exc 15cm thick above or below ground level complete all as specified and directed.

Taking down cement or cement lime plaster including tiles if exists, from brick or stone walls / ceilings etc. including raking out joints, hacking for keys, scrubbing down with water etc. including removing of rubbish off the premises complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:6 on brick work or concrete surface of wall and finished surface even and smooth without using extra cement all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on brick work or concrete surface of wall and finished surface even and smooth without using extra cement all as specified and directed.

Complete removal of existing treatment by scrapping with Wall Sander having mechanical vacuum mechanism having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust loose paint etc complete all as specified and directed. NOTE: 1. The Item No 9, 10, 11 and 12 here-in-after shall by executed through authorised applicator of OEM under provision of a tri-party MoU (Contractor, authorsied applicator of OEM and manufacturer of materials) 2. The above mentioned MoU shall be submitted to GE (through Engr-in-Charge) for Go-ahead before execution of work. 3. The work shall be executed up to height of approx 14 mtr, contractor shall arrange necessary scaffolding and saftey arrangements. 4. Please note that quoted unit rate shall be deemded inclusive and no extra cost shall be paid for above mentioned provisions.

M & L for waterproof cement based putty @ 1 Kg(undiluted) per sq mtr. of average thickness 2mm, over the plastered/old painted wall after scrapping to prepare the surface even and smooth complete and Sanding of the putty surface with wall sander having mechanical vacuum mechanism having RPM not less than 1500, sannding pad of 240 Grit or above having dia of 7"/9" to make the surface free from dust complete all as specified and directed. Step 1) Mix the putty powder by adding 40-50% water and mix it with mechanical Putty mixer having power min 1400 W and havinng mixer rod of industrial stell grade 45 with the mixing capacity of min 2.5 kg putty per minute). Step 2) Apply the first coat the prepared mixer with the help fully automatic airless spray putty application machine having a DC electric motor of 3.3 KW having flow speed of max 6 ltrs per minutes with a maximum pressure 230 bar having maximum tip size 0.041" Step (3) Allow 6-8 hrs time to dry the putty surface. NOTE: Ref Notes given under item No 9 above.