PROVN OF DISPLAY BOARD ALONGWITH CONNECTING PATHWAY NEAR BLDG NO P/701, PROVN OF JAFFRI WALL ALONGWITH GATE NEAR BLDG NO P-104 (VVIP GUEST ROOM) OF HQ COMB IBG 59 DEF AND EMP COY, PROVN OF STAGING WITH PLINTH NEAR BLDG NO P/703 AND AT PMS

Supply and fixing of FRP (Fibre Reinforced Plastic) display panel board, size 30 ft × 12 ft with a minimum thickness of 30–50 mm, featuring a smooth, white, weather-resistant, and anti-UV coated finish. The panel is to be anchored securely onto an FRP structural framework fitted over a 12 ft Roman pillar (minimum diameter of 40–60 cm or dimensions of 40 cm × 40 cm), complete with drilled top sections or mounting arms. Includes hot-dip galvanized MS (Mild Steel) FRP-coated base plates secured with heavy-duty anchor bolts, finished with a matching smooth, white, weather-resistant, and anti-UV coating, complete in all respects as per specifications and directions of the Engineer-in-Charge.

M & L for Providing, fabricating, and fixing maintenance-free and weatherproof 3D individual letters of the English alphabet, each with a height of more than 30 cm. The letters shall be fabricated using high-quality, UV-resistant cast acrylic sheets (min. 3mm–5mm thickness for fascia) with a 3-inch return (embossment) to create a 3D effect. The internal illumination shall be provided by energy-efficient, IP67/IP68 rated waterproof LED modules ensuring uniform front-lit glow without hotspots. The entire assembly shall be mounted on a sturdy base of 3mm thick Exterior Grade Aluminum Composite Panel (ACP) with a minimum 0.25mm coil thickness, fixed onto a concealed MS/GI square box pipe frame.The letters are to be securely screwed and fixed at any specified height or on the main gate. The work includes all necessary high-quality weatherproof wiring, IP67 rated power supply (SMPS), specialized fasteners, and finishing. The complete installation must be carried out to the entire satisfaction of the Engineer-in-Charge

All as per Item No 2.00 here-in-before but of 3D formations/logos of overall size 30 inch x 30 inch complete all as specified and directed.

Excavating over areas in soft/loose soil, n exc 1.5 m deep and getting out, complete all as specified and as directed.

Excavating in trenches , n.exc 1.5 m wide and n.exc 1.5 m depth for foundation etc or for shafts, wells, cesspits ,manhole pier hole, laying of cables, pipes etc n.exc 10 sqm on plan and n.exc 1.5m in depth and getting out in any kind of soil complete all as specified and directed. Note : Manual excavation to be done. During excavation if any damage occured to existing cable any type/ water pipe line, it will be contractor responsibilty to get it repair and make functional by providing jointing kit etc without any extra cost. Contractor has to repair it within 24 hrs so that essential service can not be effected due to such damage.If contractor fails to repair it within 24 hrs penalty @ Rs 500/- will be charged to contractor. In this GE decision will be final, conclusive and binding.

All as per item No 5.00 here-in-above but depth exc 1.50 m but n.exc 3.00 mtr complete all as specified and directed.

Returning filling in, including spreading, levelling, watering and well ramming in layers n.exc 25cm in soft/loose soil, complete all as specified and directed.

Removing excavated surplus soil n.exc 50m and depositing where directed at a level n.exc 1.5 mtr above the starting point, complete all as specified and directed.

M&L for pavings, with mix of fly ash, clinker & stone dust in the proportion of 1:3:6 (ie 10% fly ash, 30% clinker and 60% stone dust ) laying in layers n. exc 10cm thick, watering, ramming and compacted with hand/power roller 8 to 12 tonn roller to required camber and gradient complete all as directed by Engineer-in-Charge.

M&L for Hardcore using Broken stone or boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface, all as specified and as directed.