REPAIR TO BRICK WORK, JOINERY, PAINTING, PLUMBING WORK, ROOFING, FLOORING AND OTHER MISC REPAIRS IN BLDGS OF ARMY UNITS OF DHARMUND UNDER GE (I) 873 EWS

Amount

Dismantling floor, hearth, or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Non-skid cermic coloured tiles 7 to 8 mm thick (square / rectagular) area of each tile exceeding 0.11 Square metre but not exceeding 0.18 Square metre, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, over screed bed 15 mm thick in cement mortar 1:4 complete all as specified.

Non skid coloured ceramic tiles 7 - 8 mm thick area of each tile exceeding 0.18 Square metre but not exceeding 0.38 Square metre in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, over and including 15mm thick screed bed in CM (1:4) complete all as specified and directed.

Glazed ceramic coloured tiles in skirting/dado 350 x 250 x 7mm /450 x 350 x 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match required shade over and including 10 mm thick cement plaster in cement mortar 1:3 as backing coat rough finished surface complete all as specified.

Demolition of stone slab and tiles of any description and thickness in floors, aprons etc laid and pointed in any mortar, complete all as specified.

Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab, size of each slab not be less than 0.28 Square metre, including rubbing and mirror polishing complete over and including 20mm thick screed bed in CM 1:4, complete all as specified.

Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar over and including 10 mm thick cement plaster in cement mortar 1:3 as backing coat rough finished surface, and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing & complete all as specified & directed.

Taking down cement plaster or cement line plaster on stone or brick walls etc including racking out joints, hacking for key scrubbing down with water etc.complete all as specified.

Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement, complete all as specified and directed.

Applying three coats of white wash including preparation of newly plastered surfaces of wall complete all as specified.

Preparation of newly plastered surface of wall including cornices pilaster etc, and applying two coats of cement base paint over a coat of alkali resistant primer, complete as specified and directed.

One coat of synthetic enamel paint including preparation on old painted wooden or wood base surface of any description, not otherwise described over 10cm width or girth, complete, all as specified and directed

One coat of synthetic enamel paint including preparation on old painted steel surface of any description, not otherwise described over 10cm width or girth, complete, all as specified and directed

Preparation of old plastered surfaces of walls by washing, rubbing down and stopping of distempered and painted surfaces and applying one coat cement base paint of approved brand all as specified and as directed .

Preparation of old plastered or unplastered wall surfaces including washing, scrubbing down and stopping of distermperd surfaces and applying one coat of oil bound distemper, complete all as specified

Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level) and disposal of unserviceable material, debris and rubbish to a distance not exc. 100m, complete all as specified and as directed.

75 mm thick plain cement concrete (1:3:6), type C-1 using 20mm graded stone aggregate as in plinth protection and laid in panels complete and finished the even & fair and providings joints through out the thickness of plinth protection filed with mastic filling comprising one part of 01 bitumen 85/25 grade and three part of sand by weight all as specified and directed.

40 mm thick plain cement concrete (1:2:4), type B-1 using 20mm graded stone aggregate as in floor finishing surface even and smooth without using extra cement,complete all as specified and as directed.

Supply only glass dividing strip 3mm thick 38mm width, inserted in flooring, complete all as specified.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness including Nainital or similar pattern roof covering, all as specified.

0.63mm thick galvanised corrugated mild steel sheeting with grade of Zinc coating of 275 gms/Square metre with two corrugation side lap and at least 150 mm end lap , fixed with L or J type or cranked hook bolts, in roof, walls etc, complete, all as specified.

0.80mm thick plain galvanised mild steel sheeting with 275 gm/Square metre Zinc coating as in ridge, hips, valley gutters, drip and straight flashing fixed with fixed with L or J type or cranked hook bolts, complete, all as specified.

Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified.

Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified.

Preparation of new steel surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint over a coat of red oxide primer all as specified and as directed.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets all as specified & directed

4 mm thick non asbestos fiber cement plain building boards in false ceiling on and incl aluminium snap grid work 605 x 605 mm with using 36.5mm x 23.5 mm x 1.5 mm thick main tee, 23.5 x 23.5mm x 1.28 mm cross tee and 25x25x1.5mm angles fixed to perimeter of wall including necessary supporting hanger with 3 mm dia GI wire and J bolts washer nuts for securing frame work to ceiling suspended @ 120 cm c/c both ways, complete all as specified and directed.

PVC wall panelling made up of PVC hollow panels 25/30cm in width and 10mm thickness interlocking pattern of approved shade and design fixed to wall or ceiling all as specifed and directed.

5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and as directed.

12mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work, fixed in repairs complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) area exceeding 1.5 Square metre and not exceeding 4.0 Square metre each including taking out hold fast complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) area not exceeding 1.5 Square metre each including taking out hold fast complete all as specified and directed.

Taking down shutters of any description exceeding 1Square metre and not exceeding 2 Square metre each, complete all as specified and directed.

Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixed complete all as specified and shown in relevant drgs.

Factory made solid core PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC sheet, 'C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap inserted for top rail and bottom rail; panelling of plain colour PVC sheet to be fitted in MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified & shown in relevant drawing of item No. 08080 in MES Schedule (Part-II) and directed by Engineer-in-Charge.

1.25mm thick pressed steel frames with one shop coat of red oxide primer 105 x 60 mm with one or more rebates including necessary fixing lugs/hold fast duly tarred with bitumen and sanding with sharp clean sand, hinges (ISI marked), lock strike plate, including cement concrete type C-1, 1:3:6 (using 20 mm graded stone aggregate) as in filling hollow of frame with plain cement concrete and hold fast after taaring of hollow portion of frame complete all as specified and directed.

1.25mm thick pressed steel frames with one shop coat of red oxide primer 125 x 60 mm with one or more rebates including necessary fixing lugs/hold fast duly tarred with bitumen and sanding with sharp clean sand, hinges (ISI marked), lock strike plate, including cement concrete type C-1, 1:3:6 (using 20 mm graded stone aggregate) as in filling hollow of frame with plain cement concrete and hold fast after tarring of hollow portion of frame complete all as specified and directed

Plain framed factory made 35mm thick shutter of 2nd class hard wood rail & style (two panel) with lock rail and panel of 9mm BWP commercial plywood or 12 mm veneered particle board with commercial veneering on both faces , the size of rail and style as per IS 1003 (Part-1) kiln seasoned and pressure treated all as specified.

Factory made Glazed and skelton shutters 35mm thick of 2nd class hard wood rail & style open rebated and prepared to receive glass or wire gauze etc. shutters (without shash bars), size of members of shutters as specified in SSR Part-1, secton 8, clause 8.24(a) kiln seasoned and pressure treated all as specified.

30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified.

Two coat of synthetic enamel paint over a coat of pink primer on new wooden surface of any description, not otherwise described over 10 cm width or girth, incliding preparation of surfaces complete, all as specified.

Aluminium annodised frame for door/ window/ ventilator with one or more rebates not less than 2mm thick including jointing cleats for fixing etc complete all as specified and directed.

Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified.

Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified.

Anodised aluminium door shutters, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified

Sheet glass ordinary quality, 4.8mm thick, fitted with snap bedding rubber gasket in aluminium doors/windows exceeding 0.50Square metre in each pane, complete all as specified.

12mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and as directed.

Framed work such as grills, grating etc with ends of bars shouldered and or riveted, or forged into spikes, framed guard bars, barrel, iron doors, ladders, balusters, walkway, frame work of water tanks and similar work confirming to Fe-290 Gde E-165 complete all as specified and as directed.

Door closure hydraulically regulated designation No. 3 universal type of aluminium (die cast) body, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kilogam complete all as specified and as directed.

Door closure hydraulically regulated designation No. 3 universal type of aluminium (die cast) body, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kilogam and fixed in repairs, complete all as specified and as directed.

Butt hinges of size 100mm, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21, complete all as specified.

Aluminium anodised, barrel tower bolts of extruded section of size 150mm ISI marked and fixed, complete all as specified and directed.

Extruded aluminium alloy handles, fabricated type, anodised of size 150mm and fixed, complete all as specified and directed.

Aluminium alloy, anodised, sliding door bolt 250mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed.

Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, overall length of cover plate 150mm, complete all as specified.

100mm mortice lock, vertical type with 4 lever, brass fixed in repairs complete all as specified

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone/ concrete, glazed with putty or fixed with beads, complete, all as specified and directed.

3.0 mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane, complete, all as specified and directed.

4.0 mm thick sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane, complete, all as specified and directed.

4.0 mm thick figured glass pin headed and glazing with oil putty in square exc 0.5 sq. m in each pane, complete, all as specified and directed.

Galvanised mild steel wire cloth 0.56 nominal dia of wire and average width of aparture 1.18mm and fixed with tinned tacks or galvanised wire staples complete all as specified.

Galvanised mild steel wire cloth 0.56 nominal dia of wire and average width of aparture 1.18mm and fixed with tinned tacks or galvanised wire staples fixed in repair, complete all as specified.

Aluminium anodised, barrel tower bolts of extruded section of size 125mm fixed in repair, complete all as specified and directed.

Aluminium anodised, barrel tower bolts of extruded section of size 150mm, fixed in repair, complete all as specified and directed.

Mild steel butt hinges, medium weight, cold rolled (ISI marked),100mm long, fixed in repair, complete all as specified.

Extruded aluminium alloy handles, fabricated type, anodised of size 125mm and fixed in repair, complete all as specified and directed.

Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, overall length of cover plate 150mm, fixed in repair, complete all as specified.

Aluminium alloy, anodised, sliding door bolt 250mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy, fixed in repair, complete all as specified and directed.

Rotational moulded polythene water storage tank, white coloured, tripple layer cylindrical vertical with closed top 2000 litre capacity hoisted and fixed in position, including inlet and outlet pipe connections, 20mm dia and 15 mm dia GI pipes medium grade respectively, 20mm GI pipe medium grade over flow pipe 15 cm long wash out with plug and PTMT ball valve 20mm (Minimum weight 210 gms), high pressure with polyethelyne float and fly nuts including taking down old tank complete all as specified and directed.

Rotational moulded polythene water storage tank, white coloured, tripple layer cylindrical vertical with closed top 1000 litre capacity hoisted and fixed in position, including inlet and outlet pipe connections, 20mm dia and 15 mm dia GI pipes medium grade respectively, 20mm GI pipe medium grade over flow pipe 15 cm long wash out with plug and PTMT ball valve 20mm (Minimum weight 210 gms), high pressure with polyethelyne float and fly nuts including taking down old tank complete all as specified and directed.

Rotational moulded polythene water storage tank, white coloured, tripple layer cylindrical vertical with closed top 500 litre capacity hoisted and fixed in position, including inlet and outlet pipe connections, 20mm dia and 15 mm dia GI pipes medium grade respectively, 20mm GI pipe medium grade over flow pipe 15 cm long wash out with plug and PTMT ball valve 20mm (Minimum weight 210 gms), high pressure with polyethelyne float and fly nuts including taking down old tank complete all as specified and directed.

20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe (Minimum weight - 210 gms), fixed in repair, complete all as specified and directed.

Taking up or down steel tubing of 15mm bore pipe and connection laid in trenches or floors or fixed to walls complete all as specified and directed.

15mm dia GI steel water tubing, medium grade ISI marked, with and incl all fittings such as bends, elbows, tees, short pieces, diminishing pieces, union etc complete to walls and ceilings or laid in floors complete all as specified.

Taking up or down steel tubing of 20mm bore pipe and connection laid in trenches or floors or fixed to walls complete all as specified and directed.

20mm dia GI steel water tubing, medium grade ISI marked, with and incl all fittings such as bends, elbows, tees, short pieces, diminishing pieces, union etc complete to walls and ceilings or laid in floorscomplete all as specified.

15mm bore gun metal globe or gate valve (ISI marked) with iron wheel head, screwed both ends for iron pipe fixed in repair, complete all as specified.

20mm bore gun metal globe or gate valve (ISI marked) with iron wheel head, screwed both ends for iron pipe fixed in repair, complete all as specified.

Bib taps long body 15mm bore of cast copper alloy chromium plated (ISI marked) fancy type, screwed down, high presure, screwed both ends for iron pipe or for brass ferrule, fixed in repairs complete all as specified and directed.

Stop valve of cast copper alloy chromium plated (ISI marked), fancy type, screwed down high pressure, screwed both ends for iron pipe or for unions 15 mm bore, fixed in repairs complete all as specified and directed.complete all as specified.

Stop cock of cast copper alloy chromium plated (ISI marked), fancy type, chromium plated with long shank and cup (concealed type) screwed both ends for iron pipe or for unions 15 mm bore, fixed in repairs complete all as specified and directed.complete all as specified.

Garnet 2 way angle cock with wall flange (Cera cat part No: F2002211) for unions 15 mm bore, fixed in repairs complete all as specified and directed.complete all as specified.

Pillar tap cast copper alloy with capstan head, fancy type, chromium plated (ISI marked), screwed down, high pressure, with or without lettered 'Hot or Cold' with long screwed shank and fly nuts screwed for iron pipe complete for 15mm bore pipe, fixed in repairs all as specified & directed

Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm-45gms) for 32mm bore dia of discharge pipe to WHB, sink, fixed in repairs all as specified & directed

Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm-45gms) for 32mm bore dia of discharge pipe to Urinals, fixed in repairs all as specified & directed

PVC connection 15mm size with PTMT nuts on both ends of length 450mm , complete all as specified.

Health Faucet, ABS body with 1 metre SS braided connection pipe (Cera cat part No: F8030109AB) for 15 mm bore pipe, fixed in repairs complete all as specified and directed.

Wall mixer with telephonic shower arrangement (Cera cat part No: F3001404) with flanges, for mixing Hot & Cold water screwed down for iron pipe of 15mm bore, fixed in repairs complete all as specified and directed.

PVC valve less symphonic action type flushing cistern 10ltr capacity , low level white with inlet ball valve float and handle including brackets including 32mm dia PVC flush pipe for low level cistern including all joints fixed in repairs complete all as specified and directed.

Towel rail 450mm long of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (minimum weight 170gm), fixed in repairs complete all as specified and directed.

Vitreous china white soap dish size 160x160x90mm fixed to plugs with chromium plated brass screws fixed in repairs complete all as specified and directed.

Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long fixed in repairs complete all as specified and directed.

Corner glass shelf 150 x 150mm (Cera cat part No: F5005101), fixed in repairs complete all as specified and directed.

Vitreous china squatting pan (Orissa pattern) size 580 x 440 mm, white, with integral foot rests (excluding flushing cistern and flush pipe) incl provision of cement concrte bedding, CI 'P' trap 100mm dia, connection to trap and fushing pipe, anti syphonage fixed in repairs complete all as specified and directed.

Vitreous china wash down water closet pan (pedestal pattern) white, complete incl flushing pipe, connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc. complete fixed in repairs complete all as specified and directed.

Vitreous china urinal half stall complete incl providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and incl 60mm long brass secrews, pointing around urinal in back in cement including fixing automatic cistern with brackets, flush pipe, grating and union for discharge pipe, fixed in repair complete all as specified and directed.

Vitreous china Wash hand basin, white, flat back of size 550x400mm including brackets, brass chromium plated waste coupling including cutting for and pinning in ends of brackets or erecting stand etc., fixed in repair complete all as specified and directed.

Plastic water closet seat white closed pattern with flat bottom and cover and mild steel chromium plated hinging device, fixed in repair complete all as specified.

32mm ore PVC flexible waste pipe for WHB, fixed in repair complete all as specified.

Grating round 140 mm size of PTMT (Minimum weight 50gms), fixed in repair complete all as specified.

PVC (SWR) pipes 75mm dia any length single socketed with rubber ring joint, laid in floor/walls as soil pipe(vent pipe), fixed in repair, complete all as specified and directed.

PVC (SWR) except pipes 110mm dia any length single socketed with rubber ring joint, laid in trenches/ floors, fixed in repair, complete all as specified and directed.

PVC (SWR) floor trap of 75mm dia of outlet, plain with grating including jointing with solvent cement fixed in repair, complete all as specified.

PVC (SWR) bends any radius 110mm bore, complete all as specified.

M/S DHARAM PAUL GUPTA

Bidder Name

M S BANSI LAL CONSTRUCTION CO

M/S DHARAM PAUL GUPTA