REPAIR MAINT OF JOINERIES WIREMESH GLASS PANELS BUILT IN CUP BOARDS AND ROLLING SHUTTER ETC AT UNIT AREA ZONE B UNDER GE I GOS

Amount

Taking down chowkhat or frames n exc 1.50 Sqm each with shutters (without taking off shutters from the frame) and removing to or from store complete all as specified and directed

Taking down chowkhat or frames exc 1.50 Sqm and n exc 4 Sqm each with shutters (without taking off shutters from the frame) and removing to or from store complete all as specified and directed

Taking down shutter of any description area not exc.1 sqm each and removing to or from store complete all as specified and directed.

Taking down shutter of any description area exc. 1 sqm but n exc 2 sqm each and removing to or from store complete all as specified and directed.

Taking down and Refixing of shutter of any description not exc 1 sqm each leaf in same opening after easing and adjusting building hard ware etc complete all as specified and directed

Taking down and Refixing of shutter of any description exc. 1 sqm but not exc 2 Sqm each leaf in same opening after easing and adjusting building hard ware etc complete all as specified and directed

S&F Second class hard wood (Sal) plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S&F Second class hard wood 30 mm thick factory made glazed and skeleton shutters, open rebated and prepared to receive glass,gauze etc with out sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass,gauze etc, sizes of members of shutters as specified in SSR part I section 8 clause 8.24 (a) complete all as specified and directed.

S&F Second class hard wood 30 mm thick factory made glazed and skeleton shutters, open rebated and prepared to receive glass,gauze etc with out sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass,gauze etc, sizes of members of shutters as specified in SSR part I section 8 clause 8.24 (b) complete all as specified and directed.

S & F 35 mm thick second class hard wood rail and style plain, framed, factory made panelled shutters (Two panels) with lock rail and panel of 9 mm thick BWP commercial ply or 12 mm thick veneered particle board with commercial veneering on both faces. The size of rail and stiles are as per IS – 1003 (Part – I), kiln seasoned & chemically pressure treated complete all as specified and directed.

M&L in repair 12 mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work incl taking down old cupboards etc. complete all as specified and directed.

S&F 6 mm thick teak wood liping 12 mm width prelaminated particle board fixed with screws complete all as specified and directed.

S & F in repair Continuous (piano) hinges, 40 mm width of mild steel, bright finish or electrogalvanisd complete all as specified and directed.

S&F in repaur Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and directed.

S&F 2nd class hardwood Beads, straight (any size) for glazed or gauzed joinery, renewed, including mitres etc., and removing old beads to Store

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4 mm fixed with stainless steel wire staples or with necessary beads complete all as specified and directed.

M&L Mild steel framed work such as grills, gratings etc with ends of bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railings,frame work of watertanks and similar work conforming to Fe -290 Gde E-165 complete all as specified and directed.

S&F in repair 100 mm long butt hinges extruded aluminium alloy with galvanised mild steel hinge pin anodised type B-21 complete all as specified and directed.

S&F in repair 75 mm long butt hinges extruded aluminium alloy with galvanised mild steel hinge pin anodised type C-21 complete all as specified and directed.

S&F in repair 150 mm size extruded aluminium alloy handles fabricated type anodised of complete all as specified and directed.

S&F in repair 100 mm size extruded aluminium alloy handles fabricated type anodised of complete all as specified and directed.

S&F in repair 150 mm long aluminium,anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F in repair 100 mm long aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F in repair 250 mm long aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F in repair floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor, over all length of cover plate 150 mm complete all as specified and directed.

S&F in repairs Aluminium Mortice lock 2 lever, vertical type, size 100 mm with escutcheon plates and two keys complete all as specified and directed.

S&F in repairs Aluminium Mortice lock 4 lever, vertical type, size 100 mm with escutcheon plates and two keys complete all as specified and directed.

S&F in repair UPVC Door lock complete all as specified and directed.

Dismantling of wall and ceiling boards (fibre,pulp,insulation,etc)or insulation boards/slabs/blankets,any thickness,including cover fillets. complete alll as specified and directed

Providing & fixing false ceiling at all heights with Semi perforated 12 mm thick micro tegular edged GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595 x 595 mm of approved texture,design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 4 76 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter?locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main?T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of s1ze 600x 600mm , suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1 OOOmm length and L?shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in?Charge.

M&L for applying 3 mm thick wall care Putty in two layers on ceiling surfaces absolutely free from any kind of foreign materials and making good minor cracks etc. and surfaces absolutely even and smooth, rubbing with sand paper including and applying two coats of Oil bound distemper on ceiling , complete all as specified and directed.

S&F anodised aluminium snap grid frame work for false ceiling consists of grid size 605x605mm , complete all as specified and directed.

Hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long complete all as specified

M&L 4 mm thick non AC fibre cement building board classic type of size 605x605mm fixed or laid/inserted to aluminium framework , complete all as specified and directed.

Taking down wall panelling and similar work complete alll as specified and directed

S & F Moulding as in cornices, picture rails and the like exc 13 & n.exc 25 sqcm Fillet wrought complete all as specified and directed.

M&L 12 MM thick Plywood, grade BWP, type BB fixed with screws to timber frame work complete all as specified and directed.

M & L 1 or 0.90 mm thick Decorative laminate type 1, of surface finish, colour and pattern as approved, fixed with approved adhesive as per maker's instructions complete all as specified and directed.

S&F 5 mm thick PVC sheet fillet of width 35 mm for wall paneling inclusive of fixing on to wall to make PVC frame as shown on drawing in section 8 of SSR-2010 Part-II complete all as specified and directed

S&F solid PVC Wall Lining consisting of 5mm thick Plain colour printed PVC Sheet inclusive of solvent cement and fixing at site on PVC Frame all as per specified and directed.

M&L for preparation of new or previously untreated surfaces of wood and wood based surfaces of any description, over 10 cm in width or girth and apply two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of old painted surfaces of wood and wood based surfaces of any description, over 10 cm in width or girth and apply one coat of synthetic enamel paint complete all as specified and directed.

Hacking out old broken glass (any thickness, size quality or description) form wooden frames or steel,Alu, concrete or brick surrounds glazed with oil putty or fixed with beads complete all as specified and directed.

S&F 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane, complete all as specified and directed.

S&F in repair 300 mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

Taking down aluminium door and windows/ventilator of any size and of any description built in wall and making good at disturbed surface with cement mortar 1:4 and applying two coats of plastic emulsion paint as per existing treatment complete all as specified & directed.

S&F Powder coated Aluminium anodised glazed side hung door shutters with anodised aluminium frame of section of 100x44x2mm and bottom rail of 44.5x99x1.8mm including 5.5mm thick tinted sheet glass ordinary quality with all necessary suitable push & pull plate/handle , screw, jointing cleats, rubber packing aluminium snap beading and 1 No 200mm long Aluminium tower bolt, 100mm long 3 No Aluminium butt hinges B-21 Type and one No mortice brass lock 100 size 4 leaver (Vertical Type) with 01 No door closer Aluminium (Diie cast) body hydraullically regulated designation ;No 02 universal type, for each shutters complete all as specified; and ;directed

S&F Powder coated three track Aluminium sliding window with frame not less than 1.8 mm thick including 4 mm thick tinted glass, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket, aluminium snap beading & necessary rubber packing, locking, roller & opening arrangement, incl Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm, all fitting and fixtures complete all as specified and directed by Engr-In-Charge

S&F Powder coated Aluminium Ventilator with frame not less than 1.8 mm thick & including 4 mm thick tinted glass including beading & necessary rubber packing, locking & opening arrangement if required, all fitting and fixture complete all as specified and directed.

S&F 6 mm thick aluminium grills of god quality surrounded by aluminium 'C' channel with mesh size 75 X 75mm incl taking down old grills of any type complete all as specified and directed.

S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed.

S&F in repair door closer hydraulically regulated designation No 2, universal type, suitable for door shutter of weight not more than 60 Kg of aluminium (extruded section body) complete all as specified and directed.

Taking down rolling shutters of any size complete all as specified & directed.

S&F in repair MS pipe 50 to 125 mm dia as shaft including two coats of aluminum paint over a coat red oxide primer complete all as specifed & directed.

S&F in repair part of steel rolling shutters MS gear box set general complete incl handle and anchoring rod as of approved quality all as specified and directed.

S&F in repair Ball bearing suitable for rolling shutter complete all as specified and directed.

S&F in repair Guide channel 3" (3.50 mm thick) mild steel deep channel section etc.complete all as specified and directed.

S&F in repair Hood Cover made of 1 mm thick GI Sheet pattern

S&F in repair Bottom plate 5" (2.25mm) complete all as specified and directed.

S&F in repair Anchoring rod of 25 mm dia of MS pipe complete all as specified and directed.

S&F in repair Safety lever locks MS with 4 levers complete all as specified and directed.

Taking down and refixing in the same opening steel rolling shutter including oiling and greasing to required necessary fitting to functionall shutters as required bush, Spring. MS pipe , rod .lock. ball bearing, top cover, anchoring rod, hasp and staple and push pull or gear operating system , bevel gear box and crank handle etc complete all as specified.and directed.(area of rolling shutters exc 6 sqm but n. exc. 18 Sqm each ) (Note:- Necessary constituent items required during repair of rolling shutter shall be paid seperately as given above .)

S & F in repair Complete rolling shutter including 1.00 mm thick mild steel rolling shutter strips duly pressed on both ends of vertical sides for interlocking locks for the required length of existing steel rolling shutter including oiling and greasing to required necessary fitting to functionall shutters as required bush, Spring. MS pipe , rod .lock. ball bearing, top cover, anchoring rod, hasp and staple and push pull or gear operating system , bevel gear box and crank handle etc complete all as specified.and directed. as directed by Engg-in-Charge

S & F in repair 1.00 mm thick mild steel rolling shutter strips duly pressed on both ends of vertical sides for interlocking locks for the required length of existing steel rolling shutter complete all as specified.and directed. as directed by Engg-in-Charge

M&L for preparation of new or previously untreated surfaces of steel of any description, over 10cm in width or girth and apply two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L preparation of old decorated Steel painted surfaces of any description not other wise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Demolition of brick work built in cement mortar including all quions, arches, pillars etc all as specified and directed

M & L for brick work with sub class "B" brick (old size) straight or curved on plan to any radius in half brick thick walls built in CM 1:4 to any radius complete all as specified and directed.

M & L for brick work with fly ash bricks straight or curved on plan exc 6m mean radius in CM 1:4 including demolition of brick work or stone/ boulder masonry, built in cement mortar completed all as specified and directed.

M&L for rendering 10 mm thick on other than fair face of brick works in CM 1:6 and to be finished even and smooth with out using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick in CM (1:4) on fair faces of brick or concrete surface of wall and finished even and smooth with out using extra cement and mixed with water proofing compound @ 3% by weight of cement complete all as specified and directed. (Note: supply only of WPC shall be measured and paid for seperately)

M&L for preparation of new decorated surfaces of walls and apply one coat of white wash complete all as specified and directed

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M & L brick work with fly ash bricks, Straight or curved onplan exc 6m mean radius,built in 1:6 in cement mortar all as Specified and Directed

M & L for brick work with sub class "B" brick (old size) straight or curved on plan to any radius in half brick thick walls built in CM 1:4 to any radius complete all as specified and directed.

Taking down cement plaster any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surface of wall and to be finished even and smooth with out using extra cement complete all as specified and directed

M&L for rendering 15mm thick in CM 1:6 on other than fair faces of brick work or concrete surface of wall and to be finished even and smooth with out using extra cement complete all as specified and directed

M&L 5mm thick rendering in CM 1:3 on ceiling surfaces even and smooth without using extra cement complete all as specified

Supply only integral water proofing compound all as specified and directed.

M&L for Preparation of Newly Plastered surfaces of Wall and applying Two coats of Oil Bound Distemper over a coat of primer all as specified and directed.

M&L for preparation of newly plastered surfaces of wall applying two coat of white wash over a coat of primer all as specified and directed.

M&L Preparation of Newly Plastered surfaces of Ceiling and applying Three coats of White Wash complete all as specified and directed.

M&L for Preparation of old surfaces of Wall by brooming down or steel wire brushing, scraping down smoke soot, moulds, mass and efflorescent salts, trading oil and greasy spots etc and applying One coat of white wash over old decorated surface of walls all as specified and directed by Engineer-in-Charge.

M&L for preparation of old plastered surfaces of ceilings and apply one coat of white wash complete all as specified and directed.

M&L for preparation of old distempered surfaces of walls and applying one coat of oil bound distemper on walls all as specified and directed.

M&L for Complete Removal of existing treatment including preparation of old treated surface and applying Two coat of oil bound distemper over 3 mm thick wall care putty including preparation all as specified and directed.

M&L for complete removal of existing treatment incl preparation of New/ old decorated surfaces of wall and applying two coat of cement based paint complete all as specified and directed.

Preparation of Newly Plastered surfaces and applying two coat of Cement Base Paint on walls all as specified and directed by Engineer-in-Charge.

M&L for Preparation of old surfaces of Wall and applying one coat of Cement Base Paint on walls all as specified and directed by Engineer-in-Charge.

M&L for preparation of existing sunken floor treatment incl plaster and removal of all debris with the following specification and sequence complete all directed by Engr-In-Chrg (a) Cleaning internal surface areas of sunken thoroughly to remove all dirt & loose materials by various mechanical/manual means. (b) Providing and making fillets at the junction of the walls and the slabs using CM 1:4. (c) Laying protection plaster 15mm th. in CM 1:4 on floor and wall with integral water proofing compound (d) Applying two coats of Epoxy resin polymer modified cementitious coating like brushbond of FOSROC/ Dr. Fixit Fastflex/ Bostic Powermix both on floor and wall of sunken.

Demolition of cement concrete unreinforced in ground floor and paving n exc 15cm thick (below or above ground level) complete all as specified and directed.

M&L for PCC 1:5:10 type E-2 using 40mm graded stone aggregate as in filling of sunken floor etc and mass concrete complete all as specified and directed.

M&L for PCC 1:3:6 type C2 using 40mm graded stone aggregate, 75mm thick in plinth protection laid in panels and finished even and smooth without using extra cement including necessary form work complete all as specified and directed. Note : Joints 12mm wide to the full depth of PCC shall be provided at every 3 meters and at every change of direction and shall be filled with mixture of bitumen and sand 1:3 by weight. Cost of this provision shall be deemed to be included in the quoted rate for concrete in plinth protection.

M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in floor 50 mm thick surface finished even and smooth complete all as specified and directed.

M&L for PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in floor 25 mm thick surface finished even and rough to receive the topping layer complete all as specified and directed.

M&L for 100 mm thick Cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base complete all as specified and directed.

M&L hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface with broken stone complete all as specified and directed.

M&L for Pre Polished Chequered cement concrete tiles of size 200 mm x 200 mm x 25 mm thick set jointed and pointed in neat cement slurry in floor and cut and polished with grey cement and pigment, including 20 mm thick screed bed in CM 1:4 complete all as specified and directed.

Providing and laying 60mm thick factory made chamfered edge Pre Polished cement concrete interlocking paver block of M-35 grade with approved colour,design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50 mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified.

M&L for PCC 1:3:6 type C-2 (using 40 mm grade stone agg) as in foundation filling and mass concrete complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding etc (but not backing) and removing rubbish off the premises complete all as specified and directed.

M&L Vitrified Ceramic tiles 10 mm thick (square/ rectagular) dark/light colour shade polished,area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floors over 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L Vitrified Ceramic tiles 10 mm thick on vertical surface of wall of size not exceeding 0.36 sqm,as in dado/skitting including 10 mm thick rendering in CM 1:4 complete all as specified and directed

M&L for Non skid ceramic coloured tiles of design as approved by GE 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 15 mm thick screed bed in cement mortor 1:6 complete all as specified and directed.

M&L for Non skid ceramic coloured tiles vertical surfaces area of each tile exceeding 0.11 sq m but not exceeding 0.18 sqm as skirting non skid ceramic tiles ncluding 10 mm thick rendering in CM 1:4 complete all as specified and directed.

M&L for glazed ceramic coloured tiles 350 x 250 x 7 mm / 450 x 350 x 7 mm thick coloured on vertical surface such as dado /skirting / risers to steps etc jointed in neat cement slurry and pointed in white or coloured cement to match surface of tiles over and including rendering 10 mm thick in cement mortor 1:4 complete all as specified and directed. Note- (i) The size of tiles (except thickness) may be varied during execution without any price adjustment.

M&L for 20 mm thick granite (of any type & colour) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms/shelves incl screed bed 15 mm th. in CM (1:6) and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations

M&L for machine cut kota stone slab flooring 20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including 20mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L for machine cut kota stone slab 20mm thick as in dado, riser, steps and the likes laid over and including rendering 15mm thick in CM 1:4 for bedding layer complete all as specified and as directed.

Taking up or down steel tubing and connections including cleaning if refixing required for 15 mm bore of pipe complete all as specified and directed.

Taking up or down steel tubing and connections including cleaning if refixing required for 20 mm bore of pipe complete all as specified and directed.

Taking up or down steel tubing and connections including cleaning if refixing required for 25 mm bore of pipe complete all as specified and directed.

Refixing old steel tubing and connections in new or old position (wall, floor, ceiling etc) of 15 mm bore of pipe complete all as specified and directed.

Refixing old steel tubing and connections in new or old position (wall, floor, ceiling etc) of 20 mm bore of pipe ,complete all as specified and directed.

Refixing old steel tubing and connections in new or old position (wall, floor, ceiling etc) of 25 mm bore of pipe complete all as specified and directed.

S & F 15 mm bore 3 layer PP-R pipes SDR 7.4 & SDR 11 UV stablised and anti microbial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded PP-R fittings complete to walls, ceilings or in floors ,complete all as specified and directed.

S & F 20 mm bore 3 layer PP-R pipes SDR 7.4 & SDR 11 UV stablised and anti microbial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded PP-R fittings complete to walls, ceilings or in floors ,complete all as specified and directed.d

S & F 25 mm bore 3 layer PP-R pipes SDR 7.4 & SDR 11 UV stablised and anti microbial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded PP-R fittings complete to walls, ceilings or in floors ,complete all as specified and directed.

Making connection of PPR distrubtion bracnch with PPR main of following outer dia of pipe 16 to 40mm size by providing and fixing tee including cutting and making fusion joint etc. ,complete all as specified and directed.

Dismantling PVC water tanks exc 250 ltr but not exc 500 ltr capacity and removing to store ,complete all as specified and directed.

Dismantling PVC water tanks exc 500 ltr but not exc 1000 ltr capacity and removing to store ,complete all as specified and directed.

S&F 500 ltr capacity Rotational moulded polyethylene water storage tanks (cylin-drical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I ,complete all as specified and directed.

S&F 1000 ltr capacity Rotational moulded polyethylene water storage tanks (cylin-drical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I ,complete all as specified and directed.

Cutting chases in brick walls, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth ,complete all as specified and directed.

S&F in repair 15 mm fancy type pillar taps chromium plated cast copper alloy with capstan heads screwed down high pressure with or without lettered ‘Hot’ or ‘cold’ with long screwed shanks and fly nuts ,complete all as specified and directed.

S&F in repair 15 mm fancy type stop valve/angle valve cast copper alloy chromium plated screwed high pressure with crutch or butter fly handle screwed both ends for iron or union and fixed to 15 mm GI tube complete all as specified and directed by Engineer-in-Charge.

S&F in repair 20mm dia ball Brass valves, high pressure, with polythene float and fly nut complete, screwed for iron pipes or brass ferrule and fixed as in PVC Service tanks all as directed.

S&F in repair 25mm dia ball Brass valves, high pressure, with polythene float and fly nut complete, screwed for iron pipes or brass ferrule and fixed as in PVC Service tanks all as directed.

S & F in repairs 20mm bore gun metal gate valves with iron wheel head screwed both ends for iron pipe and fixed ,complete all as specified and directed.

S & F in repairs 25mm bore gun metal gate valves with iron wheel head screwed both ends for iron pipe and fixed ,complete all as specified and directed.

S&F in repairs PVC connection 15mm size with PTMT nuts, of 450mm length ,complete all as specified and directed.

S & F in repairs Brass chromium plated shower rose 125mm size complete all as specified and directed

S & F in repairs, vitreous china wash basin, white, flat back, size 550x400mm with brackets, inc.cutting for fixing & pinning in ends of brackets complete all as directed by Engr-in-Chrg

S & F in repairs, vitreous china wash basin oval type, white, for fixing in shelves standard size inc.cutting for fixing & pinning in ends of brackets complete all as directed by Engr-in-Chrg

S&F in repairs viterious china squatting pan orissa pattern size 580x440mm white integal foot rest including concrete bedding & including P or S trap 100mm complete all as directed by Engr-in-Chrg

S & F in repairs, vitreous china wash down water closet pan (pedestal pattern), white, incl 'P' or 'S' trap and plastic water closet seat, black, closed pattern with flat bottom and cover & MS chromium plated or aluminised hinging device, complete all as directed by Engr-in-Chrg

S & F in repairs, Vitreous China, semi-pedestal pattern (Anglo-Indian Type) white, incl 'P' or 'S' trap and plastic water closet seat, black, closed pattern with flat bottom and cover & MS chromium plated or aluminised hinging device, complete all as directed by Engr-in-Chrg

S & F in repairs, Vitreous china premium/ 1st quality wash down water closet wall hung EWC white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket etc. (excluding flushing cistern & flush pipe) incl 'P' or 'S' trap and plastic water closet seat, black, closed pattern with flat bottom and cover & MS chromium plated or aluminised hinging device, complete all as directed by Engr-in-Chrgcomplete in all respect all as specified. complete all as directed by Engr-in-Chrg

S&F in repair PVC low level flushing cistern (white) 10 Ltrs capacity with inlet, ball valve, float and handle internal fitting, push button operated type with and including brackets etc complete.

S & F in repairs Vitreous China urinals, bowl type flat back size of 465 x 355 x 265 mm white (minimum) with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement etc complete all as sapecified and directed.

S&F in repair Vitreous China valveless(white) 10 Ltrs capacity, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets etc complete.

S&F in repair CP health faucet with flex pipe and hand shover ,the length of hose 1.50 mtr fitted to the tap.complete all as specified

S&F in repairs EWC seat cover of any pattern including cover and Mild steel chromium plated hinging devices of any colour all as specified and directed.

S&F in repairs Grating doom 125 mm dia with waste hole of PTMT Minimum weight 40 gms complete all as specified and directed.

S&F in repair CP brass towel rail `D’ type 60Cm long fixed to wall all as spd and directed by Engr-in-Charge

S&F in repair soap dish any type fixed to plugs with chromium plated brass screws complete all as specified and directed

S&F as in repair glass shelf assembly consisting of 5.5mm thick sheet 12cm wide with chromium plated bracket guard railing 60cm long complete all as specified and directed

S&F as in repair cornner glass shelf of size 9"*9" shelf and frond,circle in design fixed over chromium plated brackets of heavy duty with frond linings with glass fixed in wall with necessary screws complete all as specified and directed.

S & F in repair LId of water tank capacity of 500/1000/2000 Ltrs including necessary cleats/clamps complete all as specified and directed.

S & F in repair LDPE waste pipe for WHB, sink etc. pipes of pressure rating 6 kgf/sq. cm ,complete all as specified and directed.

S & F in repair HDPE waste pipe 32 mm dia for EWC,Flushing cistern etc. pipes of pressure rating 6 kgf/sq. cm ,complete all as specified and directed.

S & F in repair 32mm dia bore Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc.with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed as in repairs ,complete all as specified and directed.

Demolition and breaking up drain pipe (salt glazed ware, AC or reinforced concrete,PVC ) set in cement mortor for any size & type complete all as specified and directed.

M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls or in floors of 75 mm bore of pipe etc complete all as specified and directed.

M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints,fixed to walls or in floors of 110 mm bore of pipe etc complete all as specified and directed.

S&F PVC (SWR) bends any radius of 75 mm bore with out access door complete all as specified and directed.

S&F PVC (SWR) bends any radius of 110 mm bore with out access door complete all as specified and directed.

S&F PVC (SWR) bends any radius of 75 mm bore with access door complete all as specified and directed.

S&F PVC (SWR) bends any radius of 110 mm bore with access door ,complete all as specified and directed.

S&F PVC (SWR) vent cowl 75 mm bore ,complete all as specified and directed.

S&F PVC (SWR) vent cowl 100 mm bore ,complete all as specified and directed.

S & F in repair Kitchen sink made of stainless steel 1 mm thick with plug washer and waste pipe incl bedding fixing cantilever brackets and connetction union to pipe overall size 915 X 460mm bowl size 405X 355 mm ,complete all as specified and directed

S& F in repair 1 mm thick stainless steel plate rack of size 900X900X200 incl fixing with rawal plug and screws ,complete all as specified and directed.

S&F in repair Bib taps fancy type chromium plated 15 mm dia, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

Taking down bib tap /wash basin tap/pillar tap/stop cock/mixture tap and refixing the same after repair and replacement of washer only for 15 mm bore size without replacing spindles complete all as specified and directed.

Taking down bib tap /wash basin tap/pillar tap/stop cock/mixture tap and refixing the same after repair and replacement of spindles for 15 mm bore size complete all as specified and directed.

M&L for cleaning of water storage tank of any capacity,size,type etc. mountred on roof incl removal of all vegetation if any, loose dirt and all other materials all as directed by Engr-in-Chrg

M&L for providing precast cement concrete louvres and jallies 35 mm thick (measured solid) including all mouldings but excluding frame in cement concrete 1:2:4 type B0 using 12.5 mm graded stone aggregates and set in cement mortar 1:4 complete all as specified and directed.

S&F Powder coated Aluminium Ventilator with frame not less than 1.8 mm thick & including 4 mm thick tinted glass including beading & necessary rubber packing, locking & opening arrangement if required, all fitting and fixture complete all as specified and directed.

Demolition of cement concrete (un-reinforced) Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work compelte all as specified and directed.

M&L for 40 mm thick cement concrete 1:2:4 type B-0 (20 mm graded stone aggregate) as in RCC roof surface finished even and smooth using extra cement including necessary form work ,complete all as specified and directed.

Taking down existing water proofing treatment/membrane of any type and Cleaning the surface of roof, palstered surfaces etc by roughening, picking, sweeping clean and washing down with water to remove all loose dirt etc and preparing the surface to receive plaster and brushing neat cement slurry @ 3.00 Kg of cement per Sqm ,complete all as specified and directed.

M&L for rendering 15 mm thick surface as in roof with integral water proofing compound @ 3% by the weight of cement in CM 1:4, complete all as specified & directed. (Integral WPC will be measured and paid separately).

M&L Water proofing treatment on "Non approachable / non accessible and approachable roof" surface (Horizontal & Vertical surfaces) in following sequence through manufacturer / authorized applicator of the manufacturer including taking down of existing roof treatment, properly cleaning & drying the concrete surfaces complete (i) Applying a coat of oxidised bitumen based solvent primer @ 0.3 Kg / Sqm (ii) Applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 kg/ Sqm incl cleaning surfaces complete all as specified and directed. (iii) Laying evenly over the bitumen coated surface, polymeric water proofing membrane Hyperplas standard wt not less than 3kg /Sqm with 100 mm over laps shall be sealed by flame as per manufacturers instruction complete all as specified and directed. (iv) Applying two coats of bituminous aluminium paint including preparation complete all as specified and directed.

Demolition brick tiles or terracing tiles, single layer on roofs incl screed bed if any and cleaning the surface complete all as specified and directed.

M&L for Cement concrete tiles 20cmx 20cm x 20mm thick with mixture of white and grey cement and no pigment over 15mm thick bedding layer in CM(1:4) complete all as specified and directed

Dismantling of AC/GI plain/Corrugated / semi corrugated roof sheets any type and any size complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and as directed by Engineer-in-Charge.

S&F Mild steel work in tubular poles & trusses (framed) including purlins,rafters and special shaped washer etc complete using ERW or induction butt welded tubes confirming to IS-1161-1979 grade St-240 complete all as specified and as directed by Engineer-in-Charge.

S & F steel Fe-410-W (Gde 250 Quality-A) work in tubular stanchion/post including special shaped washer etc. complete using one of more tubes or induction butt welded tubes conforming to IS-1161- 1979 grade St.-240 complete all as specified and directed.

S&F mild steel work Fe-410-W (Gde 250 Quality-A) in Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment complete all as specified and as directed by Engineer-in-Charge.

M&L for preparation of new/old or previously untreated surfaces of steel of any description, over 10cm in width or girth and apply two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L TMT bar 10 mm dia and over cut to length bent to shape required including cranking, bending spirally for hoping for columns hooking ends and binding with & including Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Taking down chowkhat or frames exc 1.50 Sqm and n exc 4 Sqm each with shutters (without taking off shutters from the frame) and removing to or from store complete all as specified and directed

S & F for solid PVC door frame of size 50x47mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supplied and fixing in opening as specified and shown on drawing made on section 8 of SSR 2010 Part-II complete all as specified and directed

S & F factory made solid panel PVC door shutter 30 mm thick style consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC “C” channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, S & F in the frame as per specifications and shown on drawing in section 8 of SSR-2010 Part-II complete all as specified and directed

Demolition of Reinforced cement concrete of any description and in any position not otherwise specifically provided for ,complete all as specified and directed.

M&L RCC M-30 in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete. ,complete all as specified and directed.

M&L RCC M-30 in Columns, pillars, piers, posts and struts etc; ,complete all as specified and directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for fair finished surface ,complete all as specified and directed.

Formwork to sides of pillars, posts, struts, piers, columns, and stanchions and similar work; for fair finished surface ,complete all as specified and directed.

M&L for preparation of newly plastered surfaces and applying two coats of cement base paint over a coat of primer etc complete all as specified and directed.

M&L for preparation of new steel or iron surfaces Surfaces over 10cm in width or girth and applying two coats of synthatic enamel paint over a coat of red oxide zinc chrome primer ,complete all as specified and directed.

M&L for MS Framed work of Fe 410 W (Gde-E-250) Quality A, as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing ,complete all as specified and directed.

M&L for PCC 1:3:6 Type C-2 using 40 mm graded stone aggregate in foundation filling and mass concrete all as specified and directed.

Taking down UPVC door and windows/ventilator of any size and of any description built in wall and making good at disturbed surface with cement mortar 1:4 complete all as specified & directed.

S&F in repairs 15 mm dia Curtain rods, Stainless steel, chromium plated with fixing brackets complete all as specified and directed.

S & F in repair Brass chromium plated wall mixer non-telephonic shower arrangement with connecting legs & wall flanges for 15 mm bore of pipe all as specified and directed.

S & F in repair Brass chromium plated hole bidet mixer (Basin mixer) with pop-up waste system with 300 mm long braided hoses complete all as specified and directed.

S & F in repair Brass chromium plated Sink mixer with raised J shaped swinging spout (Wall mounted model) with connecting legs & Wall flanges complete all as specified and directed.

S&F in repair Bib taps 2 in 1 type , cast copper alloy chromium plated with crutch or butterfly handle, fixed to 15 mm dia GI tube/PPR pipe complete all as specified and directed.

S&F in repair 15 mm fancy type pillar taps chromium plated cast copper alloy of long swan neck type quarter turn type with or without lettered Hot or Cold with long screwed shanks and fly nuts ,complete all as specified and directed.

S&F in repairs 15 mm dia Curtain rods, mild steel, chromium plated with fixing brackets complete all as specified and directed.

M/s M M Engineering Systems (BID ID -3373546)

M/S. KISHAN ENGINEERING (BID ID -3373713)

M/s Ats Electricals (BID ID -3373526)

HARAGOURI SUPPLIERS (BID ID -3373534)

M/S JAGANNATH SASMAL (BID ID -3373563)

M/S SIWALIK AND CO (BID ID -3373789)

DHABALESWAR ENGINEERING WORKS (BID ID -3373785)