SPECIAL REPAIR TO BLDG NO T 63 OR LIVING LINE OF 5221 ASC BN MT BAIRAGARH UNDER GE BHOPAL

Amount

Note :(i) Please refer Sch A/ BOQ Notes before quoting the tender for all phases/ items mentioned below. (ii) Amount of Schedule of credit shall be deducted offline

Taking down cement plaster on brick or stone wall etc including raking out joints, hacking for key, scrubbing down with water of any description complete all as specified and directed.

M&L for 15 mm thick rendering in CM 1:4 on any face of brick or concrete surfaces (external surfaces) mixed with water proofing compound @ 3% by wt of cement, finished fair, even and smooth without using any extra cement complete all as specified and directed. Notes: (i) Water proofing compound shall be measured and paid seperately. (ii) Rate is inclusive of scaffolding upto 12 m height.

M&L for 10 mm thick rendering in CM 1:6 on any face of brick or concrete surface, finishing the surface fair and even without using extra cement complete all as specified and directed.

Supply only Integral water proofing compound complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quions, arches, pillars, etc but excluding ashlar facings dressed stonework and precast articles complete all as specified and directed.

Dismentling structural steel work including purlins, tursses, etc. complete all as specified and directed.

S&F of mild steel work as in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded including cutting to required length, tubes conforming to IS: 1161- 1979 grade St.-240 complete all as specified and directed.

Dismantling of asbestos cement (corrugated, semi corrugated etc.) sheets in roof coverings, including ridge complete all as specified and directed.

S&F of pre-painted galvalume aluminum zinc coating GI based corrugated steel sheeting 0.50 mm thick of an colour having tensile strength of 550 Mpa (AZ-150) as in roof covering / cladding to wall, chajjas, ridges, etc. and fixed with self tapping screws complete all as specified and directed.

S&F of pre-painted galvalume aluminum zinc coating GI based plain steel sheeting 0.50 mm thick of an colour having tensile strength of 550 Mpa (AZ-150) as in roof covering / cladding to wall, chajjas, ridges, etc. and fixed with self tapping screws complete all as specified and directed.

S&F of mild steel work as in hand rails, half round or other steel section or core for wooden hand-rail straight portion, guard bar, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, welding, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of steel and iron surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons, walls, etc, laid bedded and pointed in any mortar complete all as specified and directed.

M&L for 18 to 20 mm thick granite stone slab (any type) (table rubbed and polished) as in steps, jambs, pillars, window & door cills, cooking platforms, counter, shelves and like in cement mortar (1:4) over and including 15 mm thick screed bed in CM 1:4 and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including making the edges bullnosed complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square /rectangular) joint free, area of each tile exceeding 0.36 Sqm but not exceeding 0.75 Sqm as in floors; over and including 20 mm thick screed bed in CM 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles complete all as specified and directed.

M&L for double charged polished vitrified tiles super glossy solitaire plus, 9 to 10 mm thick of area exc 0.36 sqm but n. exc 0.75 sqm on vertical surface of walls etc; over and including 10 mm thick rendering in CM 1:3 for backing of tiles, set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles complete all as specified and directed. Make: Kajaria Super Glossy K 10108 or equivalent in Johnson/ Somany as approved by GE.

M&L for vitrified ceramic light shade coloured tiles 8 to 10 mm thick (square/ rectangular) double charged, polished, area of each tiles not exceeding 0.36 Sqm as in floors etc; set and jointed in neat cement slurry over and including 15 mm thick screed bed in CM (1:6) and pointed in white or coloured cement to match the shade of tiles complete all as specified and directed.

M&L fo vitrified ceramic light shade coloured tiles 10 mm thick (square/ rectangular) double charged, polished, area of each tiles not exceeding 0.36 Sqm, fixed on vertical surfaces such as skirting, dado etc; set and jointed in neat cement slurry over and including 10 mm thick cement plaster in CM (1:4) and pointed in white or coloured cement to match the shade of tiles complete all as specified and directed.

M&L for 18-20 mm thick machine cut kota stone slab flooring over and including 15 mm thick cement screed base in CM 1:6; laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing including dismantling of stone slabs and tiles of any description or thickness complete all as specified and directed.

M&L for 18-20 mm thick machine cut kota stone slab as in riser of steps, skirting, dado and pillar etc; over and including 10 mm thick rendering in CM 1:4; laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab and making the edges bullnosed including rubbing and mirror polishing including dismantling of stone slabs and tiles of any description or thickness complete all as specified and directed.

M&L for 10 mm thick heavy duty flooring tiles, harsh weather & UV resistance, high abrasion resistance, MOH hardness >6, area of each tile not less than 0.09 sqm, anti slip type laid in floors, steps, etc; over and including 15 mm thick screed bed in CM 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles complete all as specified and directed.

M&L for false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of semi perforated 12 mm thick micro tegular of size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC 0.50 to 0.75 as per IS 8225:1987, non-combustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33 mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15 x 32 mm of length 3000 mm, cross-T of size 15 x 32 mm of length 1200 mm and secondary intermediate cross-T of size 15 x 32 mm of length 600 mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24 x 24 x 0.40 mm of length 3000 mm to be fixed on periphery wall, partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws complete as per manufacturer instructions with and including dismantling of old ceiling board of any description complete all as specified and directed.

S&F of solid PVC wall lining consisting of 5 mm thick plain colour single side prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed.

S&F of 5 mm thick PVC sheet fillet of width 35 mm for wall paneling inclusive of fixing on to wall to make PVC frame incl fillets as per specification and drawing complete all as specified and directed.

S&F in repairs 15 mm bore GI tube medium grade with all necessary fittings and fixed to wall and ceiling or laid in floors complete all as specified and directed.

S&F in repairs 20 mm bore GI tube medium grade with all necessary fittings and fixed to wall and ceiling or laid in floors complete all as specified and directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc; and making good, cutting not exc 10 cm girth complete all as specified and directed.

S&F in repairs 24 x 30 inch size & 5 mm thick looking mirror, decorative type of approved quality, bevelled silver mirror frameless or with frame rectangle for bathroom, dressing and bedroom and fixed with screws to wall complete all as specified and directed.

S&F in repairs 15 mm bore brass CP two way bib taps, fancy type, screwed for iron pipe and fixed complete all as specified and directed. Make: Jaquar Cat No. OPP-CHR-15041 PM or equivalent in Hindware/ Cera as approved by GE.

S&F for synthetic acrylic venetian blinds having vertical or horizontal strip of width 100 mm and all necessary fixing arrangements and accessories complete all as specified and directed.

S&F of 15 mm bore angle/ stop valves, cast copper alloy, chromium plated, fancy type with long shank and cup and capstan head, screwed down, screwed for iron pipe or union complete as specified and directed.

S&F of exposed part kit of two concealed stop cocks with two handles & basin spouts with wall flange (compatible with LAG-91423C) complete all as specified and directed. Make: Jaquar LAG-CHR-91423K or equivalent in Hindware/ Cera as approved by GE.

S&F in repairs brass Kitchen/ Bathroom toilet paper roll holder chromium plated complete all as specified and directed. Make: Jaquar Cat No ACN-1151N or equivalent in Hindware/ Cera as approved by GE.

S&F in repairs towel ring round with round flange complete all as specified and directed. Make: Jaquar Cat No ACN-1121BN or equivalent in Hindware/ Cera as approved by GE.

S&F in repairs soap dish holder complete all as specified and directed. Make: Jaquar Cat No ACN-1131N or equivalent in Hindware/ Cera as approved by GE.

S&F in repairs 32mm bore PVC waste pipe for kitchen sink / WHB of one mtr length complete all as specified and directed.

S&F in repairs 125 mm dia chromium plated grating (Minimum weight 25gms) complete all as specified and directed.

S&F in repairs PVC connection 15mm size with PTMT nuts of length 600 mm and fixed complete all as specified and directed.

S&F in repairs water closet, rimless single piece WC with UF soft close slim seat cover, hinges, dual flush cistern fittings, fixing accessories and accessories set of size 385 x 720 x 710 mm, S Trap 300 mm complete all as specified and directed. Make: Jaquar ONS-WHT-10853S300UFSM or equivalent in Hindware/ Cera as approved by GE.

S&F in repairs vitreous china urinal, half stall type, white (excluding flushing cistern, flush pipe and waste pipe) complete but including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in white cement; fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe complete all as specified and directed.

S&F of vitrious china thin rim table top basin of size 480 x 480 x 135 mm, round shape complete all as specified and directed. Make: Jaquar Cat No. OPS-WHT-15901N or equivalent in Hindware/ Cera as approved by GE.

S&F in repairs syphonic action type PVC low level flushing cistern 10 ltrs capacity with 32mm dia flush pipe and PVC connection 600 mm long 15 mm bore with brass heads & washers and fixed complete all as specified and directed.

S&F in repairs for health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

S&F of 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls or laid in trenches/floors complete all as specified and directed.

S&F of 75 mm bore PVC (SWR) bends of any radius and jointed with solvent cement complete all as specified and directed.

S&F of 75 mm bore PVC (SWR) junction single, (Single T) equal or unequal and jointed with solvent cement complete all as specified and directed.

S&F of 75 mm bore PVC (SWR) junction single, (Double T) equal or unequal and jointed with solvent cement complete all as specified and directed.

S&F of 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls or laid in trenches/floors complete all as specified and directed.

S&F of 110 mm bore PVC (SWR) bends of any radius and jointed with solvent cement complete all as specified and directed.

S&F of 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal and jointed with solvent cement complete all as specified and directed.

S&F of 75 mm bore PVC (SWR) floor trap, plain with SS grating, fixed and jointed with solvent cement complete all as specified and direcetd.

Taking down chowkhats or frame with shutter n. exc 1.5 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed

Taking down chowkhats or frame with shutters exc 1.5 Sqm but n exc. 4.00 Sqm each (without taking off shutters from the frame) complete all as specified and directed

S&F of powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket as required with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc; aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/ paneling, CP brass/ stainless steel screws complete all as specified and directed. Note: Rates are inclusive of necessary new fitting for door/ window/ vent i.e handle, tower bolt, butt hinges, roller, slider etc complete.

S&F of 4 mm thick figured glass, pin head type and glazing with oil putty in squares not exc 0.5 sqm in pane complete all as specified and directed.

S&F of 3 mm thick aluminum composte panel (ACP), exterior grade, PE core, PVDF coated of approved shade complete all as specified and directed.

S&F for stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples or uPVC door with beading complete all as specified and directed.

S&F of factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other fames/ chowkhat of size 45 x 90 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed. Note: M.S. hold fast/ lugs or SS dash fasteners shall be included in the quoted rate of item.

S&F of factory made factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified and directed. Note: Stainless steel butt hinges (03 Nos.) and screws shall be included in the quoted rate of item.

S&F of 150 mm long aluminium handles, cast type, anodised and fixed to shutters complete all as specified and directed.

S&F of 200 mm long aluminium anodised barrel tower bolts, extruded section and fixed complete all as specified and directed.

S&F of 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F of 140 mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

M&L for applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS: 15489 : 2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over new wall surfaces complete all as specified and directed.

M&L for preparation of newly plastered or unplastered surfaces of walls and applying two coats of oil bound distemper over a coat of wall primer complete all as specified and directed.

Complete removal of existing treatment from wall surfaces with and including M&L for applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS: 15489 : 2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over new wall surfaces complete all as specified and directed.

Complete removal of existing treatment from wall surfaces with and including M&l for applying two coats of oil bound distemper over a coat of wall primer complete all as specified and directed.

M&L for applying a coat of 1.5 mm thick white wall care cement based water proof putty in two layers on walls/ ceiling, finshed even and smooth complete all as specified and directed.

Cutting openings, through brick walls for door, window and other openings or enlarging existing openings, converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks and removing rubbish to a distance n exc. 50 m complete all as specified and directed.

Forming jambs to openings including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work in CM 1:4 complete all as specified and directed.

M&L for brick work with fly ash bricks (modular size bricks) straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete all as specified and directed.

M&L for brick work with sub class ‘B’ bricks (modular size bricks) straight or curved on plan any radius in half brick thick walls, built in CM 1:4 complete all as specified and directed.

M/L for 75 mm thick PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate) as in plinth protection, aprons, hard standing, path and like including bitmuminous mastic filling in 1:3 joints (in every 3.00 mtr) and finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for providing cement concrete, 1:2:4, type B-1 (using 20 mm graded stone aggregate) as in coping, bed blocks, lintels, cills, steps, seismic and other similer bands, kerbs and like etc complete all as specified and directed.

Dismantling posts or struts (wood, steel or RCC) any section embedded in concrete, masonry, brick work, incl taking out embedded portion and making good disturbed ground complete all as specified and directed.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundations etc. or for shafts, well cess pits, manholes, pier holes, laying of cables etc. but not exceeding 10 Sqm on plan and not exceeding 1.5 m in depth and getting out in any type of soil complete all as specified and directed.

M&L for cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in sub base concrete incl demolition of concrete and paving n. exc 15 cm thick (below or above GL) complete all as specified and directed.

S&F for mild steel works as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc and flat iron fillets for securing wire mesh similar work, steel confirming to Fe-290 Gde E-165 etc complete all as specified and directed.

Excavating in post holes in any type of soil (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm incl removing of surplus soil complete all as specified and directed.

M&L for plain cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.

Dismantling fencing wire mesh, any type complete all as specified and directed.

S&F of PVC coated galvanized iron chain linck fencing of 50 x 50 mm mesh size, wire dia 2.4 to 4 mm, 60 GSM incl provn of binding wire complete all as specified and directed.

S&F of mild steel round bars 10 mm dia and over, cut to length, bent to shape required and conforming to gde Fe 410- W (Gde E-250) quality A for securing chain link fencing complete all as specified and directed.

Taking down copper/ aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.for taking credit and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed.

M&L for point wiring for one light / fan / bell point with multi-stranded copper conductor stranded copper conductor 1.5 Sqmm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS cable, 1100 volts grade in and including medium grade, PVC concealed conduit and conduit accessories of not less than 20 mm dia, concealed in wall/ floor etc, ISI marked with sheel metal mild steel flush box, white cover plate with frame for fixing modular switches, sockets and fan regulators etc. including PVC insulated multi-stranded copper conductor 1.5 Sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed at site for the following:-

All as per item No 87.00 here-in-before but for one 3 pin socket outlet, 5 Amps on same board complete.

All as per item No. 87.00 here-in-before but for one 3 pin socket outlet, 5 Amps on independent board complete.

All as per item No. 87.00 here-in-before but for point wiring with 4.0 Sqmm FRLS mutistranded copper conductor cable for 5/ 15 Amps, switch socket combination on independent board and with 4.0 Sqmm, FRLS insulated multi-stranded single core earth wire for earth continuity, connected to common earth dolly complete.

S&F of modular switch piano, one module, single pole, one way, 6 Amps, 240 volt, 50Hz, AC complete all as specified and directed.

S&F of ceiling rose surface bakelite, three terminals, 230 volt AC complete all as specified and directed.

S&F of modular socket outlet, 2 module, multipurpose having provision for 2/3 pin, 5/16 Amp, 230 volt AC complete all as specified and directed.

S&F of lamp holder, PVC/ polycarbonate body with back plate suitable for batten fittings with 9 Watt LED bulb complete all as specified and directed.

S&F in replacement new ceiling fan complete with blades, down rods and accessories, 230 volts, 1200 mm sweep, Min air delivery 210 CFM with service value 6.00 BEE, five star rated with brushless direct current motor (BLDC) complete all as specified and directed. Note: Old unserviceable ceiling fan will be deposited at MES store yard.

S&F in repairs building security light fitting 35 Watt, made up of pressure die cast aluminium housing with high efficient LED as lighting source and pc over having top opening separate driver compartment with IP-66 protection and impact resistance of IK-07 including suitable galvanized iron light grade pipe brackets of 1 mtr length, bent to shape to obtain required shape including clamps, nuts, bolts, washers etc; and making connection with suitable copper wire of size 23/0.0076 complete all as specified and directed.

M&L for replacement of sub main wiring with approved colour coding as per IS (Red, Black and Green for single phase circuits) with two single core PVC insulated FRLS cable 1100 V unsheathed with stranded copper conductor of 4.0 sqmm nominal cross section area and drawing into rigid non metallic PVC conduit, ISI marked, medium grade inclusive of all fittings such as tees, bends, junction boxes, elbows, saddles, pipe hooks, couples, lock outs, etc. of 25 mm external diameter and PVC insulated stranded copper conductor of 2.5 sqmm nominal cross section area as earth wire complete all as specified and directed. Note: Two runs of 4.0 sqmm cable, one run of 2.5 sqmm cable of earth continuity conductor & PVC conduit pipe shall be measured as one unit length.

S&F in repairs LED tube light fitting, surface mounted lumanaires, 1 x 20 W, 240 V, decorative ultra slim round /squar profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack with bipin holders, LED lamps, connector block, etc. complete with all accessories internally prewired and including connecting up with flexible copper conductor cable of suitable size complete all as specified and directed.

S&F in repairs LED light fitting mirror type with high out put diffuser of 2 feet long, 10 watt, 220 Volts AC, decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F of LED luminaire 600 x 600 mm, 35/ 36 Watts, 220 Volts AC, recessed type with high efficiency PMMA diffuser, soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed

S&F in repairs sheet metal enclosure for MCB, DB, SPN, 240 Volts, 200 Amps rated bus bar, 08 way, double door enclosure made up of CRCA sheet steel, RAL 9003 powder coated, IP 43 protection including wooden rectangle board of first quality of suitable size for mounting of DB box complete all as specified and directed.

S&F of MCB, SPN, 32 Amps, 240 Volts AC supply, C Curve with over load and short circuit protection and rupturing capacity not less than 10 KA complete all as specified and directed.

S&F of factory made epoxy powder coated distribution board, TP & N, 4 ways (VTPN MCCB DB) and space for MCCB as incomer, with metal door (IP-43 protection) fabricated from CRCA sheet and fixed semi flush to wall, suitable for universal mounting and including isolated neutral bar, insulated bus bar assembly, neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with knockouts complete all as specified and directed.

S&F of MCB, SP, 6 to 32 Amps, 240 Volts AC supply, C Curve with over load and short circuit protection and rupturing capacity not less than 10 KA complete all as specified and directed.

S&F in replacement exhaust fan, rust proof steel body, 230 Volts AC, single phase of size 300 mm sweep with blades, frame and louvers and all necessary fittings with and including drilling of hole and repair of disturbed surfaces complete all as specified and directed. Note: Old unserviceable exhaust fan will be deposited at MES store yard.

M&L for earthing complete with galvanised steel plate earth electrode 600 x 600 x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to earthing lead of size 4 mm dia galvanised mild steel wire by means of bolts, nuts, check nuts and washers of galvanised iron from earth plate to test point upto 7.5 metre including all as shown in electrical plate No. 3 of SSR Part I (2009) including necessary concrete chamber in cement concrete M15 (Nominal Mix) using 20 mm nominal size coarse aggregate, precast RCC cover slab in cement concrete M15 (Nominal mix) using 20 mm nominal size coarse aggregate of size 40 x 40 x 5 cm reinforced with 8 mm dia TMT bars @ 150 mm c/c both ways with one handle for lifting made out of 8 mm dia bar, GI funnel, GI wire mesh filter, 20 mm dia GI pipe medium grade for watering, 15 mm dia GI pipe medium grade for protection of earthing lead, charcoal or coke and salt in alternate layers including necessary excavation and earth work in any type of soil/ strata and testing complete all as specified and directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm in any type of soil complete all as specified and directed.

Removing excavated material to a distance n exc 50 m and depositing where directed at a level n exc 1.5 mtr above starting point all as specified and directed.

M&L for sand filling with clean dry fine sand unwashed including gently punning around cables in trenches for cable protection (8 cm below cable & 15 cm above cable) complete all as specified and directed. Note:-Compacted/punned thickness shall be measured & paid.

Supplying and laying reinforced precast concrete cable cover, Class LV, Type I, flat, size 250 mm x 150 mm x 40 mm for cable protection, laid flat and dry in trenches over the cable perpendicular to the direction of cable complete all as specified and directed.

Supply, laying, connecting and testing LT XLPE insulated, screened, PVC bedded, armoured, heavy duty cable with aluminium conductor of size 16 Sqmm, 4 core, 1100 volts grade, laid in trenches, passing through pipes/ducts, etc; including taking out old unserveciable cable, any type complete all as specified and directed.

S&F in repairs 25 mm GI tubing light grade (as per IS -1239) with all fittings as required for passing through cables under floors, along the wall/ pole, etc; complete all as specified and directed.

S&F in repairs 25 mm bore GI tube medium grade with all necessary fittings and fixed to wall and ceiling or laid in floors complete all as specified and directed.

S&F in repairs Gun-metal gate valves of size 20 mm with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repairs Gun-metal gate valves of size 25 mm with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in replacement rotational moulded polyethylene water storage tanks, triple layers (cylindrical vertical with closed top) of capacity 1000 litres, hoisted including all fittings as required and fixed in position complete all as specified and directed.

Deduct Schedule of credit (calculation will be done off line) Rs. 66140.00

ROYAL CONSTRUCTION (BID ID -3507000)

M/S RAKESH TRADERS (BID ID -3511064)

BRIJLAL UPADHAYA (BID ID -3512889)

CREATIVE CONSTRUCTION (BID ID -3507160)

M/S Shanti Traders (BID ID -3507099)