PROVN AND ALLIED WORKS AT CERTAIN LOCATION OF SEVOKE ROAD MIL STN UNDER GE SEVOKE ROAD

Amount

Schedule 'A'

Surface excavation n.exc (not exceeding) 30cm deep and averaging 15 deep in soft/loose soil and getting out.

Roughening surfaces of old concrete floor by picking sweeping clean and washing down with water to remove dust and brushing neat cement slurry with 3 kg of cement per sqm complete all as specified.

Excavation in trenches n.exc. 1.5 m wide and n, exc 1.5 m in depth for foundation etc or for shaft, wells, cesspits, manholes, pier hoes, etc n.exc 10 sqm on plan and n.exc 1.5 mtr in depth and getting out soft/loose soil all as specified

M&L for cement ocncrete 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in foundations, filling and mass concrete etc complete all as specified and as directed

M&L for RCC M-25 (Design Mix) as in columns, finished fair and even complete all as specified.

M&L for RCC M-25 (Design Mix) as in foundations including raft foting, foundation beams, plinth beams, beams for columns etc Complete all as specified.

M&L for RCC M-25 (Design Mix) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like etc Complete all as specified.

M/L for RCC M-25 (Design Mix) as in lintel etc complete all as specified and as directed.

M&L mild steel bars TMT 8mm dia and over, cut to length, bent to shape required, inluding cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

All as per item No. 9 above but 5mm dia and over upto and including 10 mm dia in stirrups, spacers and binders. Complete all as specified and directed.

Use and waste Formwork to sides of concerete foundations, footings bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work vertical or to batter, rough finished surfaces complete all as specified.

Use and waste Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar work n exc 200mm thick rough finished surfaces complete all as specified.

M&L for brickwork with subclass 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified.

M&L sand filling under floors or in foundation including watering and consolidation complete all as specified and directed (consolidated thickness shall be measured)

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc. 25cm soft/loose soil complete all as specified.

Removing excavated surplus soil to a distance n.exc 50Mtr and depositing where directed at a level n.exc 1.5 mtr above the starting point complete all as specified.

M&L hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface ocmplete all as specified and directed. (measurement shall be after consolidation)

M&L for 75 mm thick PCC 1:4:8 Type D-2 (using 40mm graded mechanically crushed stone aggregate) as in sub base of flooring complete all as specified.

M&L for 50 mm thick, PCC 1:2:4 type B1 (using 20mm graded crushed stone aggregate) as in floor, finished even and rough with using extra cement ocmplete as specified and directed.

Taking down cement plaster of any description in any position including racking out joints making key scrubbing down with water etc. and removal of debris out side MD land complete all as specified and directed.

M&L for 15mm thick rendering on other than fair faces of brick or concrete surfaces in CM 1:6 finished even and smooth without using extra cement complete all as specified.

M&L for 20 mm thick rendering in CM 1:4 in two layers of 10mm each using water proofing ocmpound in top layer only including finishing the surface even and fair (WPC shall be measured and paid seperately)

Supply only water proofing compound (intergral) complete all as specified and directed.

S&F rolled mild steel sections any type including hollow section as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates (FE-290 Gde E-165) all as specified and directed.

M&L pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified.

(M&L pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in ridges, eves gutters etc fixed with self tapping screws complete all as specified.

M&L for virified Non-skid ceramic tiles 10 mm thick (square/ rectangular) polished size, area of each tile exceeding not exceeding 0.36 Sqm in floors etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match, over and including 20mm thick cement mortar screed bed in CM 1:6 etc, complete all as specified and directed.

M&L for virified Non-skid ceramic tiles 10 mm thick (square/ rectangular) polished size, area of each tile exceeding not exceeding 0.36 Sqm as in datto/skirting etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match, over and including 10mm thick cement mortar screed bed in CM 1:4 etc, complete all as specified and directed.

Taking down chowkhats or frame n exc 1.5 sqm but with shutters (without taking off shutters from the fame) complete all as specified and directed by Engr in Charge.

Taking down chowkhats or frame exc 1.5 sqm but n exc 4 sqm but with shutters (without taking off shutters from the fame) and refixing of old shutter in new chowhhats complete all as specified and directed by Engr in Charge.

S&F Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc; complete, size of frame 125mm x 60mm including one shop coat of Zinc Chrome primer complete all as specified and as directed.

M&L for PCC 1:3:6 type C1 (20mm grade agg) as in back filling of pressed steel frame complete all as per specification and directed by Engr in Charge.

S & F factory made 35mm thick plain, framed panelled shutter (two panels) with lock rail and panel of 9 mm thick BWP commercial ply or 12 mm veneered particle board with commerical veneering in both faces. The size of rails and stiles shall be as per IS:1003 (Part-I), kiln seasoned and chemically pressure treated of 2nd class hard wood complete all as specified and directed.

Supply and fixing 2nd class hard wood factory made 35mm thick glazed skelton shutters, open rebated and prepared to receive glass, gauge etc. edges of framing, plain, chamfered or rounded, fitted with cut and mitred beads for securing glass/gauge etc. with sizes of members of shutters as specified in para 8.24(a) of SSR 2009 (Part I), complete all as specified and directed.

S&F PVC door frame of size 50mmx47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube fixing in opening as per specification & drawing all as specified and directed.

S&F factory made soild panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed togehter with solvent cement, supplying & fixing in the frame at site as per specification complete all as specified and directed.

S&F for steel windows for with side hung shutters including projecting type hinges with steel handles and stlli peg stay, complete with glazing bars, dovetailed oe welded complete all as specified and directed

S&F for steel windows for with side hung shutters including projecting type hinges with steel handles and stlli peg stay, complete without glazing bars, dovetailed oe welded complete all as specified and directed

S&F in repairs aluminium alloy wire cloth, 0.45 mm noimnal dia of wire and average width of aperture 1.40 mm,complete all as specified and directed.

S&F mild steel Framed work such as grills, gratings etc, with ends of bars shouldered or rebated or forged into spikes, framed guard bars, barred iron doors, railings, framework of water tanks and similar work conforming to Fe -290 Grade -E-165, complete all as specified and directed.

S&F 3 mm thick glass ordinary quality and glazing with oil putty in each pane 0.5Sqm in each pane complete all as specified.

S&F Stainless steel butt hinges medium weight cold rolled of size 100mm complete all as specified and directed.

S&F aluminium anodised bow handles of 150mm size, fabricated type of extruded section fixed with screws to shutters, complete all as specified and directed.

S&F aluminium anodised bow handles of 125mm size, fabricated type of extruded section fixed with screws to shutters, complete all as specified and directed.

S&F aluminium anodised barrel tower bolts of extruded section, 150mm long, complete all as specified and directed.

S&F aluminium anodised barrel tower bolts of extruded section, 125mm long, complete all as specified and directed.

S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clip of sheet,cast or extruded section and fixing bolt of extruded section or cast aluminium alloy complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces exceeding 10cm in width or girth complete all as specified and directed.

M&L for 1mm thick wall care putty on internal surface of wall new/old surfaces complete all as specified and as directed.

M & L for applying two coats of oil bound distemper with roller over one coat of primer,after preparation of new surfaces of walls etc, complete all as specified and directed.

M&L for preparation of new decorated surfaces of wall and applying two coats of antifungal exterior paint (of shade/colour as directed by GE) over one coat of primer all as per manufacturerinstruction including necessary scaffoldings etc. complete all as specified and directed.

M&L for complete removal of existing treatment of wall by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots including washing down water etc. applying two coats of antifungal exterior paint (of shade/colour as directed by GE) over one coat of primer all as per manufacturerinstruction including necessary scaffoldings etc. complete all as specified and directed.

S&F CP curtain rails 20 mm dia chromium plated, with and including fixing brackets, stops, rollers etc, complete al as specified and directed.

S & F angles , tee sections, flat iron for stepd , Hand rails, half round or other steel section or core for wooden hand-rail straight portionfixed independently , without connecting plates etc as in splited end fencing post Fe 410-W (Gde-E-250) quality A including drilling holes

M&L for non skid coloured ceramic tiles of 7 to 8 mm thick (square/rectangular) area Exceeding 0.06sqm but not exceeding 0.11 sqm in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match with the shade of tiles including 15 mm t screed bed or beding layer of CM 1:6 for laying of floor finises complete all as specified and as directed

M&L for glazed coloured ceramic tiles of size 450x300x 7mm thickness in vertical surfaces set and jointed in neat cement slurry and pointed in coloured cement to match with the shade of tiles including 10 mm thick backing layer of CM 1:3 for fixing of tiles on wall complete all as specified and as directed.

S&F vitreous china EWC white with 'P' or 'S' trap front or back inlet any pattern excluding flushing cistern & flush pipe but including plastic water closet seat black closed pattern with flat bottom and cover and hinging device complete all as specified.

S&F PVC valve less syphonic action type flushing cistern 10 ltrs capacity low level white with inlet, ball valve, float and handle including brackets complete all as specified.

S&F vitreous china ware wash hand basin white colour flat back of size 550x400mm including CI brackets, CP brass waste coupling 32mm etc complete all as specified.

S&F CP brass towel rail 60cm long including fitting complete all as specified and directed.

S&F CP brass overhead shower 80mm dia round shape Cat No.EOS-541N of ESSCO or equivalent with and and including CP brass shower arm 240mm long with wall flange Cat No.ALE 536A of ESSCO or equivalent complete all specified and directed.

S&F bib tap fancy type chromium plated cast copper alloy with capstan head wall flange screwed down screwed for iron pipe 15 mm bore.

S&F 15 mm Pillar tap cast copper alloy with capsten head chromium plated fancy type screwed down high pressure with or without letter hot or cold with long screwed shank and flynuts screwed for iron pipe. Cat No. DLX-507 of ESSCO or equivalent.

S&F 15 mm stop valve (male or female thread) cast copper alloy with crutch or butterfly handle screwed down screwed for iron pipe and fixed in repairs

S&F of 15mm bore CP Toilet Hand Pressed Nozzle (Heath faucet) with 1.5 mtr long tube with CP wall bracket including taking down the old one complete all as specified and as directed.

Cutting chases in brickwalls girth exc 10 cm but n exc 20 cm , pinning in making good to facings where required and pointing in cement mortar 1:3 for conceled water tubing etc and making good complete all as specified.

S&F PVC waste pipe suitable for 32 mm dia waste coupling for wash hand basin complete all as specified and directed.

S&F stainless steel grating 100mm dia over floor trap complete all as specified.

S&Fsheet glass shelf assembly consisiting of 5.5 mm thick sheet glass shelf 12mm wide with CP brass bracket guard railing 60cm long complete all as specified.

S&F in repairs 15 mm bore medium grade galvanized concealed steel water tubing with all fittings and fixed to wall/ceiling or laid in floor complete all as specified as in short lengths complete all as specified.

S&F in repair of CP brass wall mixture 3 in 1 system with provision forhead shower with long bend pipes and wall flangs with 125mm size chromium plated shower rose with swivel joint and matching CP arm complete.

S&F 15 mm bore chromium plated two way bib cock completeall as secified

S&F in repairs PVC (SWR) 110 mm bore pipes single socketed in any length with rubber ring joints fixed in walls or floor complete as specified and as directed.

S&F PVC (SWR) 75 mm bore pipes single socketed in any length with rubber ring joints fixed in walls or floor complete as specified and as directed.

S&F PVC (SWR) bends any radius suitable for 110mm bore pipe provided with access door complete all as specified and directed.

S&F PVC (SWR) bends any radius suitable for 75mm bore pipe provided with access door complete all as specified and directed.

S&F PVC (SWR) 110mm Junction (Single T) equal or un equal provided with access door complete all as specified and directed.

M&L PVC (SWR) gully trap 125/110mm setting and jointed with solvent cement complete all as specified and directed.

M&L PVC (SWR) floor trap plain with grating including jointed with solvent cement of diamemeter 75mm complete all as specified and directed.

S&F PVC (SWR) 75mm bore junction (Single T) equal or un equal provided with access door complete all as specified and directed.

M&L for 100mm thick cement concrete type B-2 1:2:4 (40mm graded agg.) as in PCC floor complete all as specified and directed.

M&L for chequered cement concrete tiles 30cm x 30 cm x 25 mm thick (with grey cement and pigments), set, jointed and pointed in neat cement slurry in floor with grey cement mixed with pigments to match with the colour of tiles, laid over and including 20 mm thick screed bed in CM 1:4, complete all as specified and directed.

M&L for 150 mm nominal dia DWCPE pipe (SN-8) pipes ISI marked laid in trenches and joined complete all as specified and directed.

M&L for PCC (1:3:6) type C2 (using 40mm graded crushed stone aggregate) as in bed for drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 200 mm bore pipe complete as specified and as directed.

Taking down carefully old unserviceable copper/aluminium point wiring (light,Exchaust fan, socket or power) complete incl fittings such as switches,ceiling roses, pendents, regulators,bells,sockets,tube light fittings etc, and making good disturbed surface of walls & floors etc complete all as specified and as directed.

Taking down old unserviceable Main Switch, DB's consisting of MCBs wooden/GI/MS sheet board etc for kept in store and for later use all as directed.

Taking down carefully unserviceable sub main wiring of any size/core/type including making good the disturbed surfaces all as directed.

M&L for concealed point wiring with two single core PVC insulated, unsheathed, multistranded copper conductor FRLS of size 1.5 sqmm and one single core PVC insulated unsheathed stranded copper conductor of size 1.50 sqmm green in colour as earth lead in and including PVC rigid conduit (medium grade) with all fittings & accessories including provn of MS sunk terminal box of appropriate size suitable for switch fixed flush to wall for mounting switch, sockets, fan regulators etc with 3mm thick hylum sheet top cover with screws & cup washers for one light / fan point / call bell complete. NOTE : Cost of making good the disturbed surfaces (if any) matching with the existing surface is deemed to be included in the unit quoted rates.

All as per Item Sl No - 90 here in before but with two single core PVC insulated, unsheathed, multistranded copper conductor of size 1.5 sqmm and one single core PVC insulated unsheathed stranded copper conductor of size 1.5 sqmm green in colour as earth lead for 5/6 A switch-socket point on independent board complete.

All as per Item Sl No - 90 here in before but with two single core PVC insulated, unsheathed, multistranded copper conductor of size 2.50 sqmm and one single core PVC insulated unsheathed stranded copper conductor of size 2.5 sqmm green in colour as earth lead for 15/16 A switch-socket point on independent board complete.

All as per Item Sl No - 90 here in before but with two single core PVC insulated, unsheathed, multistranded copper conductor of size 1.5 sqmm and one single core PVC insulated unsheathed stranded copper conductor of size 1.5 sqmm green in colour as earth lead for 5/6 A socket point with switch on same board complete.

M & L for Switch Socket combination 3 Pin, 5 Amp flush type universal, 240 volts, complete as directed.

M & L for Socket outlet 3 Pin, 5 Amp flush type universal, 240 volts, complete as directed.

M & L for Switch Socket Combination 5 in 1, 3 pin, 5 and 15 Amp flush type universal, 240 volts, complete as directed.

S&F piano switch single pole 5 Amp 230 Volt all as specified and as directed.

S&F ceiling rose ,surface bakelite 65mm x 50mm size with three terminals all specified and as directed.

S&F piano switch single pole 2 way, 5 Amp 230 Volt all as specified and as directed..

Taking down existing u/s FTL light fitting and S&F in repair decorative box type 4 feet fitting with LED retrifit tube 20 watt with Al extruded batten luminaire for 230 volt AC,including LED tube 20 Watt complete all as directed by EIC.

M&L LED street light of capacity 40 watt in Aluminium PDC housing, toughened glass cover with IP66 protection complete all accessories with frame and connecting PVC copper wire not exc 5 mtr all as directed.

Taking down ceiling fans/exhaust fan of any size,dismantling blades and removing fan and blades to MES store for refixing or as directed.

S&F in repair energy efficient BLDC ceiling fan 230V 1200 mm sweep with all accessories and connecting up with the ceiling rose with required flexible wire of suitable size with ceiling fan complete all as specified and as directed. Make: Havells/Usha.

S&F electronic step regulator (speed regulation in 5 steps) suitable for ceiling fan 1200 sweep/1400 mm, 120 Watt complete.

S&F in repair exhaust fan AC, single phase, 230/240 V, of size 230 mm seeep steel/aluminium metal body with lowers incl making holes on wall & making good the distrubed surfaces with all connecting arrangements complete all as directed.

Supply & Fixing DB with sheet metal enclouser 240 volts, 12 way with Amp rated bus bar single pole & neutral double door for MCB, incl cutting chases for DB of reqd size and making good distrubed surface area complete all as specified and as directed.

Supply & Fixing MCB double pole (DP) 240 volts of capacity 32 Amp ,C curve, complete all as specifie and as directed.

S&F MCB, SP, 10KA, 415V, "C" curve, 06-32 A, ISI Marked complete all as directed.

Supply & Fixing DB with sheet metal enclouser 240 volts, 4 way with Amp rated bus bar single pole & neutral double door for MCB, incl cutting chases for DB of reqd size and making good distrubed surface area complete all as specified and as directed.

Material and labour for concealed sub main wiring surface type with two nos single core PVC insulated unsheathed multi strand copper conductor FRLS cable of size 4 sqmm and one no single core PVC insulated unsheathed multi strand copper conductor FRLS cable of size 6 sqmm as in continuous earth wire drawn into and including surface rigid non-metallic ISI marked PVC conduit medium grade with all fittings and fixings accessories complete all as specified and as directed.

M & L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6 mm thick burried directly in ground (in vertical position ) earth pit not less than 2.25 mtrs below normal ground level with the top edgeof the earth plate not less than 1.5 mtr (B.G.L.) & connected to galvanised iron wire 4 mm dia by means of bolts,nuts,checknuts & washer of galvanised iron including PCC (1:2:4) type B1 precast RCC cover slab with suitable handle made pf 6 mm round bar, including necessary excavation & earth work in any type of soil , 20 mm dia med grade galavinised steel tube for watering with one end fixed with cast iron funnel & wire mesh, 15 mm bore light grade galvanised steel tubing up to 7.5 mtr length for drawing earth lead GI strip proctection & common salt , charcoal in alternate layers etc. complete all as shown in EP no 3 of SSR Part 1 & testing on complection incl taking down old unsv earthing complete.

Supply and lay in trenches/wall LT UG XLPE insulated ,armoured heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area 10sq mm 2 core including making necessery connections all as specified and as directed..

Supply & laying burnt clay sub class B brick as cable protection complete all as specified and as directed.

Supply and fix GI pipe 40mm medium grade for cable protection complete all as specified and as directed.

Surface dressing n.exc 15cm deep in soft/loose soil including removing of bushes complete all as directed

Formwork to Formwork to chullah hoods, chajjas, troughs and similar items including edges all as specified and directed.

Use and waste formwork to sides of pillars. posts. struts. piers. columns and stan- rchions for fair finished surfaces of concrete,square, complete all as specified and as directed.

Use and waste Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and as directed.

M&L for 75mm thick PCC (1:3:6 type C2) using 40mm graded stone aggregate in plinth protection ,foot path and hand standing finished concrete surface even and smooth without using extra cement complete all as specified and as directed.

M&L for Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. all as specified and as directed..

M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat alkali resistant primer applied over 1-2 mm thick wall putty all as specified and directed.

M&L for PCC 1:2:4 type B0 (12.5 mm graded stone aggregate for damp proof course,40 mm thick to horizontal or vertical surfaces including necessary formwork all as specified and as directed..

S/F in repair anodised powder coated aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.

S/F in repair anodised powder coated aluminium door shutters, fixed type without sash bar, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised alumnium snap beading, screws handles 2 nos in each door,hinges etc. complete all as specified

S/F anodised aluminium sliding window and ventilator shutters, fixed type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws ,screws handles 2 nos complete all as specified

S&FAnodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin- charge complete all as specified and directed.

S&F Sheet glass, ordinary quality and glazing in square exceeding 0.50 sqm in each pane in aluminium joinery in each pane ,5.5 mm thick glass all as specified and as directed..

M&L solar control film 25 micron reflective type sticked to glass panes as per instuctions of manufacturers complete all as specified and as directed.

M&L for Aluminium (Die) Body Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specifie and as directed.

S&F Anodised aluminium snapgrid framework(size of grid 605x605 mm) for false ceilng all as specified and directed by engr in charge.

S&F Hangers 2.25 mm dia GI ( upto 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia 40 mm long complete all as specified.

S&F 4 mm thick non asbestos fibre cement building (size 600 mm x600 mm) decorative type boards fixed or laid / insertedto timber/ GI/Aluminium framework with screws as in ceiling and fixed. complete all as specified and as directed.

M&L for Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the substructure in contact with backfill to be measured ) complete all as specified and as directed.

M&L for Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface all as specified and as directed..

M&L for Treating the soil under pligth protection at the rate of 5.00 litre of emulsion per Sqm of the of surface area. complete all as specified and as directed.

M&L for Treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specifie and as directed.

M & L in repairs 18/19 mm thick pre-laminated particle board exterior grade pre-laminated one side with decorative choice laminated and other side balancing white lamination fixed with screws to timber frame work as in cup board shutters, partitions and shelves complete as specified and directed.

M & L for external teak wood lipping 6mm thick and 18/19mm wide for block boards fixed with nails complete as specified and directed.

S&F 150mm long Aluminium handle cast type anodised complete all as specified and directed.

M & L for 1st class hard wood fillets area exc 3 but n.exc 6 sqcm wrought square or rectangular in section plain or bull nosed, splayed, chamfered or rounded on one edge or face fixed with nails complete as specified and directed.

S & F continuous (Piano) hinges mild steel bright finish or electro galvanised width of flaps when open 30mm complete as specified and directed.

S&F for 25 mm bore medium grade galvanized steel water tubing with all fittings and fixed to wall/ceiling or laid in floor complete all as specified as in short lengths complete all as specified.

S& F 15 mm angle stop valve cast (male or female thread) copper alloy chromium plated fancy type with capstan head, wall flange screwed down screwed for iron pipe and fixed in repairs complete all as specifie and as directed.

S&F Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40 gms) complete all as directed.

S&F Rotational moulded polyethylene water storage tanks 1000 Lit capacity double layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I.

S&F in repair stainless steel sink with draining board, made out of 1.0mm thick sheet for kitchen or laboratory with coupling ,plug washers waste pipe, cast iron cantilever brackests and connecting union over all size 915mmx460mm with bowl size 410mmx330mmx160mm complete all as specified. Make :- Nirali/Blue star or equivalent

S/F in repair harrison rails 20 mm dia ,anodised aluminium, chromium plated with fixing brackets, stops, rollers etc. complete all as specifie and as directed.

Supply and lay in trenches/wall LT UG XLPE insulated ,armoured heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area 35 sq mm 3.5 core including making necessery connections all as specified and as directed.

Supply and fix GI pipe 50mm light grade for cable protection complete all as specified and as directed.

Cutting & screwing existing water pipe line mains and connection with new pipe line laid including necessery fitting required at site all as specified and directed.

Supply and fix gun metal gate valves ,iron wheel head , screwed both ends for iron pipes of size 25mm complete all as directed.

Supply, laying, testing and commissioning high pressure line of MS (heavy class) pipe of 20mm dia on wall/floor surface with required fixture including complete all as specified and directed.

S&F shutoff valve heavy duty 20mm dia complete all as specified and as directed.

All as per Item Sl No - 90 here in before but with two single core PVC insulated, unsheathed, multistranded copper conductor of size 2.5 sqmm and one single core PVC insulated unsheathed stranded copper conductor of size 2.5 sqmm green in colour as earth lead for 5/6 A switch-socket point on independent board complete all as specified and as directed.

All as per Item Sl No - 90 here in before but with two single core PVC insulated, unsheathed, multistranded copper conductor of size 4.0 sqmm and one single core PVC insulated unsheathed stranded copper conductor of size 4.0 sqmm green in colour as earth lead for 15/16 A switch-socket point on independent board all as specified and as directed..

S&F decorative full glow squre PATTENS type recess mounted linear 40Watt panel LED fitting 2'x2' size with LED driver with high transmittenance luminaire for 230 volt AC, complete all as directed by EIC.

S&F new generation energy saving & environmental friendly long life versatile pressure die-cast aluminium building security light with high power LED as light source lamp type 25W with SPD, IP 66 protection with toughened glass incl fixing pipe/saddle complete all as specified and as directed.

S&F in repair decorative box type tube light fitting with LED light 9 watt 2 feet with Al extruded batten luminaire for 230 volt AC all as directed by EIC.

S&F ventilation fan with louvers, single phase, 230/240 V, of size 200 mm seeep polycarbonate body, low noise and weight with thermal overload protection and incl making holes on wall & making good the distrubed surfaces with all connecting arrangements complete of make usha or equivalent of Havells/Khaitan.

Supply & Fixing vertical TPN DB with sheet metal enclouser 415 volts, 6 way with rated bus bar single pole & neutral double door for MCB, incl cutting chases for DB of reqd size and making good distrubed surface area complete all as specified and as directed.

Supply & Fixing TPN DB with sheet metal enclouser 415 volts, 4 way with rated bus bar single pole & neutral double door for MCB, incl cutting chases for DB of reqd size and making good distrubed surface area complete all as specified and as directed.

S&F MCCB, 4 pole, 16KA, 415V, 100 A, ISI Marked complete all as directed.

S&F MCB 3 pole, 10KA, 415V, "C" curve, 63 A, ISI Marked complete all as directed.

S&F MCB TPN, 10KA, 415V, "C" curve, 63 A, ISI Marked complete all as directed.

M & L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6 mm thick burried directly in ground (in vertical position ) earth pit not less than 2.25 mtrs below normal ground level with the top edgeof the earth plate not less than 1.5 mtr (B.G.L.) & connected to galvanised iron strip 25x4mm by means of bolts,nuts,checknuts & washer of galvanised iron including PCC (1:2:4) type B1 precast RCC cover slab with suitable handle made pf 6 mm round bar, including necessary excavation & earth work in any type of soil , 20 mm dia med grade galavinised steel tube for watering with one end fixed with cast iron funnel & wire mesh, 30 mm bore light grade galvanised steel tubing up to 7.5 mtr length for drawing earth lead GI strip proctection & common salt, charcoal in alternate layers etc. complete all as shown in EP no 3 of SSR Part 1.

Material and labour for concealed sub main wiring with four nos single core PVC insulated unsheathed multi strand copper conductor FRLS cable of size 16 sqmm and two no single core PVC insulated unsheathed multi strand copper conductor FRLS cable of size 16 sqmm as in continuous earth wire drawn into and including rigid non-metallic ISI marked PVC conduit medium grade with all fittings and fixings accessories complete all as specified and as directed.

Material and labour for concealed sub main wiring with four nos single core PVC insulated unsheathed multi strand copper conductor FRLS cable of size 6 sqmm and two no single core PVC insulated unsheathed multi strand copper conductor FRLS cable of size 6 sqmm as in continuous earth wire drawn into and including rigid non-metallic ISI marked PVC conduit medium grade with all fittings and fixings accessories complete all as specified and as directed.

S&F concealed sheet metal enclouser with plastic socket and plug, 5 pin 3P+N+E, 32A, eight module, front facing CRCA sheet metal, powder coated of make L&T cat no: DBPPS532SD or equivalent complete all as specified and directed.

S&F servo voltage stablizer for automatic operation three phase, naturally oil cooled, indoor type & designed for input variation between 300V to 480V with output voltage stablized at 415V with accuracy +-2.5% and speed of correction 8 volts per sec and of capacity 30KVA all as specified and directed.

M/L for RCC M25 (Design mix) in chajjas complete all as specified and as directed.

M/L for RCC M25 (Design mix) in beams, cantilevers, bressurnmers lintels over 1.5m span complete all as specified and as directed.

Maroom/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick spread, levelled and rammed including watering complete all as specified and as directed.

M&L for preparation of new plastered surface and applying two coats of cement base paint over one coat of primer on wall etc complete all as specified and directed.

S/F Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides ,30 mm thick complete all as specified and as directed.

S/F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.

S&F flat iron (mild steel) fillets fixed to fly proof steel window shutters with screws or riveted for securing wiring gauze etc. and as in wind tiles for roof complete all as specified and directed.

S&F mild steel square bar 12mm in grill or guard bars welded to steel window all as specified and directed.

S&F of 20 mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball for iron pipe and fixed in repairs complete all as specified and as directed.

S&F for 20 mm bore medium grade galvanized steel water tubing with all fittings and fixed to wall/ceiling or laid in floor complete all as specified as in short lengths complete all as specified.

S&F of PVC connection pipe 15 mm dia 450 mm long with PTMT nut fixed in repairs complete all as specified and as directed.

S&F in repairs vitreous china squatting pan "ORISSA" patern of size 580x440mm white, with integral foot rests "P" or "S" or trap (excluding flushing cistern & flush pipe) incl provisioning of lime concrete bedding complete all as specified.

Excavating over areas not exceeding 1.5 m deep and getting out in soft / loose soil complete all as specified and as directed.

All as per item no.182 above but depth exc 1.50 m and n.exc 3.00 m complete all as specified and as directed.

M/Lfor brick work with sub-class 'B' bricks bricksone one and half brick thick honey comb walls built in cement motar 1:4 straight or curved on plan to any radius in half brick thick walls built in In cement mortar 1:4 complete all as specified and as directed.

Supply 150 mm internal dia of salt glazed stone ware drain pipes laid in trenches and jointed as specified.

M/l for broken brick bats to fill in soakage well complete all as specified and as directed.

S&F CI manhle cover 600 mm Dia complete all as specified and as directed.

Providing precast cement concrete in window or door cills, lintels, bressumers, steps, quoin blocks ( for use with masonry), string courses, copings kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, boundarys ( for stone walling) corbwls, beackets, etc. ( of any section indicated) with plain fair faces, including chamfers weatherings throating etc. and setting in mortar complete with joints to match, ttype B-1(20mm graded aggregate) Set in CM1: 4 complete all as specified and as directed.

Providing precast cement concrete in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain with plain fair faces, including chamfers weatherings throating etc. and setting in mortar complete with joints to match, type B-1(20mm graded aggregate) Set in CM1: 4 complete all as specified and as directed.

M&L for 15mm thick rendering on other than fair faces of brick or concrete surfaces in CM 1:4 with mixed water proofing compound @3% of cement, finshed even and smooth with using extra cement complete all as specified.

S/F cast iron soil, waste and vent pipes, in any lenght with or without ear with cement joint, fix on wall 75 mm bore sand cast pipe complete all as specified and as directed.

S/F Cast iron soil cowl 75 mm dia complete all as specified and as directed.

M/S.TIRUPATI CONSTRUCTION

SHRI JAYANTA GHOSH

CHAKRABORTY AND SONS

M/S JYOTI SHARMA AND SONS

S.N. GHOSH AND CO.

M/S JANATA CONSTRUCTION

BINOD TRADING CO.

M/s. RAMPHAL GARG