Special Repair work of House No. 29 Officer Colony No. 3 at Gurugram (RECALL)

Amount

Earth work in excavation by mechanical means (Hydraulicexcavator) /manual mean so verareas( exceeding3 0 cm in depth, 1.5m in width as wellas 10sqm on plan)i ncluding getting out and disposal of excavated earth lead upto 50m and lift upto1.5m, as directed by Engineer-in-charge.(HSR2021/4.13.1) All kinds of soil

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m. (HSR2021/ 4.32)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level: (HSR 2021/6.1) 6.1.1) 1 : 1 ½: 3 ( 1 Cement: 1 ½ coarse sand (zone-Ill) : 3 cum graded stone aggregate 20 mm nominal size)

6.1.6) 1 :4: 8 ( 1 Cement : 4 coarse sand (zone-Ill) : 8 graded cum stone aggregate 40 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement-All work up to plinth level: (HSR 2021/ 6.14.1) ( cement : 1. 5 coarse sand (zone-Ill): 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor four level, excluding cost of centering, shuttering, finishing and reinforcement : (HSR 2021/ 6.15) 6.15.1) 1:1.5:3 (1 cement : 1.5 coarse sand(zone-111) : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in vertical and horizontal fins individually or forming box louvers, facias and eaves boards above plinth level up to floor four level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1 ½ coarse sand(zone-111) : 3 graded stone aggregate 20mm nominal size). (HSR 2021/ 6.25) All works up to plinth level (HSR 2021/ 6.25.1)

Centering and shuttering including strutting, propping etc. and removal of form for (HSR 2021/ 6.30) 6.30.1) Foundations, footings, bases of columns, etc. for mass concrete

6.30.3) Suspended floors, roofs, landings, balconies

6.30.5) Lintels, beams, plinth beams, girders, bressumers and cantilevers

Steel reinforcement for R.C.C. work, where not included in the complete rate of RCC, including straightening, cutting, bending, placing in position, binding, wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc. complete in all respect Note:- Reinforcement shall be measured in length including hooks, if any, separately for different diameters as actually used in work , excluding overlaps. Wastage, overlaps, couplings, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire or other methods of binding & placing shall not be measured and cost of these items shall be deemed to be included in the rates for reinforcement (HSR 2021/6.33) 6.33.6) Thermo-Mechanically Treated bars of grade Fe-500D or more. (Labour Rate)

Providing and laying damp-proof course with cement concrete 1: 1.5:3 (1 cement : 1.5 coarse sand (zone-Ill): 3 graded stone aggregate 20mm nominal size) (HSR 2021/6.9) 6.9.2) 40 mm thick

Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 confonning to IS: 2222 in superstructure above plinth level up to floor four level in cement mortar 1 :6 (1 cement : 6 coarse sand) With non-modular bricks (HSR 2021 / 7.23.1)

Half brick masonry with common burnt clay non-modular bricks of class designation 10.00 in superstr-ucture above plinth level up to floor IV level. (HSR 2021/ 7.28) 7.28.2) Cement mortar 1 :4 ( 1 cement :4 coarse sand)

Painting top of roofs with bitumen of approved quality @ 17kg per 1O sqm impregnated with a coat of coarse sand at 60 cudm per 10 sqm, including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete (HSR 9.10) 9.10.1) With residual type petroleum bitumen of grade VG -1 O

10 cm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25 mm thick mud mortar mixed with bhusa @ 35 kg per cum of earth and gobri leaping with mix 1: 1 (1 clay : 1 cow dung) and covered with flat tile bricks, grouted with cement mortar 1: 3 (1 cement: 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement and finished neat: (HSR 2021/ 9.11) 9.11.1) With common burnt clay non-modular brick tile of class sqm designation 12.50

Providing gola 75x75 mm in cement concrete 1: 2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1 :3 (1 cement : 3 fine sand) as per standard design : (HSR2021/ 9.17) 9.17.1) In 75x75 mm deep chase

Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1 :2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1 :3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete (HSR 2021/ 9.18)

Providing and fixing on wall face Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. (HSR 2021/9.57) 9.57.2) 110 mm diameter

Providing and fixing on wall face Unplasticised - PVC moulded fittings/ accessories for Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 1 O mm gap for thermal expansion. (HSR 2021/ 9.58) 9.58.5) Bend 87.5° 9.58.5.2) 110 mm bend

Providing and fixing M.S. holder bat clamps of approved design to C.I. or S.C.I. rain water pipes embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and cost of cutting holes and making good the walls etc. : (HSR2021/ 9.62) 9.62.1) 100 mm diameter

Providing and laying of base course of floors consisting of 100 mm thick cement 1 :8: 16 and 100 mm sand or stone filling. Internal flooring only. (HSR 2021/10.1)

Fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size not less than 300 x 450mm as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1 :3 (1 cement : 3 coarse sand) and jointing with grey cement slurry@ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.. (HSR 2021/10.62) (Labour Rate)

10 mm thick cement plaster (HSR 2021/ 11.4) 11.4.2) 1 :3 (1 cement: 3 fine sand)

12 mm cement plaster of mix (HSR 2021/ 11.5) 11.5.3) 1 :4 (1 cement: 4 fine sand)

15 mm cement plaster on the rough side of single or half brick wall of mix (HSR2021/ 11.6) 11.6.2) 1 :6 (1 cement: 6 fine sand)

Providing and fixing of chicken wire mesh for avoiding cracks in plaster with necessary nail/screws etc. complete in all respect to the entire satisfaction of engineer-in-charge (HSR 2021/ 11.17)

Applying two coats white cement based putty of approved brand and manufacturer, over plastered surface and grinding the surface smooth with sand paper to get en even and smooth finish including cost and carriage of all material , labour charges, scaffolding, sundries etc. complete (HSR 2021/11.58) (labour rate)

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade: (HSR 2021/ 11.64) 11.64.1) New work (two or more coats) over and including water thinnable priming coat with cement primer (Labour Rate)

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface: (HSR 2021/11.67) 11.67.1) Water thinnable cement primer (Labour Rate)

Wall painting on a cement plaster surface with acrylic emulsion paint of approved brand and manufacture to give an even shade (HSR2021/ 11.71) 11.71.1) Two or more coats on new work (Labour Rate)

Providing and fixing ISi marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: (HSR2021/ 12.37) 12.37.1) 35 mm thick including ISi marked Stainless Steel butt hinges with necessary screws

Fixing aluminium sliding door bolts, ISi marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : (HSR 2021/12.98) 12.98.2) 250x16 mm (Labour Rate)

Fixing aluminium handles, ISi marked, anodised (anodic coating not less than grade AC 1 O as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete (HSR2021 / 12.102) 12.102.1) 125 mm (Labour Rate)

Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. (HSR2021/13.1.) 13.1.1) Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size).

Supply & fixing Windows frames (Chowkhats) including mullions consisting frame fabricated from sheet roll formed out of 1.2mm thick galvanized sheet as per IS:277 (Base steel as per IS 513) with zinc of 120 gm/sqm & Powder coated with pure Polyester powder up to 50 microns (as per approved colour), 3 Nos. 100mm butt - hinges 2mm thick, 6 Nos. 1.2mm thick CRCA electroplated stiffner, 6 Nos. M.S hold fast with split and tail welded to stiffner plate 200mm long, receiver for aldrop, weld less corner assembly with brackets & screws, M.S tie rod 50mm x 25mm to be fixed at bottom finished with powder coated total thickness of coating 0.6mm of approved shade, fixed in position including the cost of cement concrete for 1 :2:4 for fixing lugs complete in all respects as per drawing, design, specification & entire satisfaction of Engineer-in-charge. (HSR 2021/13.21) 13.21.1) Door Frame of size 80mm x 50mm with 37mm wide single rebate metre for 35mm door shutter Door Frame of size 80mm x 50mm with 37mm wide single rebate for 35mm door shutter (single rebate) (HSR 2021/ 13.21.1)

Door Frame of size 125mm x 60mm with 37mm wide double rebate for 35mm door shutter (double rebate) (HSR 2021/ 13.21.2)

Laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : (Staircase only) (HSR 2021/ 10.49) (Labour Rate)

Laying vitrified floor tiles in 600X600 sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.(600*600) (HSR 2021/ 10.63.2) (Labour Rate)

Laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete.(only first floor terrace area) (HSR 2021/ 10.61) (Labour Rat)

Laying of tile work in skirting, risers of steps and dado up to 2 m height over 12 mm thick bed of cement mortar 1:3 (1 cement :3 coarse sand) and jointed with grey cement slurry @ 3.3 kg/sqm, including pointing in white cement mixed with pigment of matching shade complete. (HSR 2021/ 10.32.1) (Labour Rate)

Laying of chequered terrazzo tiles 20 to 22 mm thick with graded marble chips of size up to 6 mm in floors, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete, on 20 mm thick bed of cement mortar 1:4 (1 cement :4 coarse sand) : (HSR 2021/ 10.30.1) (Labour Rate)

Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying: (HSR 2021/ 28.16)

Extra for grouting the joints of floor tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. (HSR 2021/ 10.70.2)

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Twin rubber stopper (HSR 2021/ 12.103.2)

Providing and fixing of roller blinds on windows complete with material and labour complete with push up & down arrangement as per approved design / colour and Engineer-in-charge. (HSR 2021/ 12.114)

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. (HSR 2021/4.14) 4.14.1) All kinds of soil.

Drilling and tapping cast iron pipe lines of all diameters and screwing in ferrule and connections - (HSR 2021/20.24) 20.24.1) Ferrule size 10 mm

Cutting holes up to 23 cm through stone masonry or brick work in cement walls for pipes and making good including repointing, replastering and finishing according to existing finish where required. (HSR 2021/20.26) 20.26.2) 22.86 cm thick wall

Providing and screwing in brass/Gun Metal ferrules drilling and tapping A.C. /PVC pipe lines of all diameters and connections including cost of M.S. Clamp (Heavy) with welded socket/Saddle piece including carriage, loading, unloading etc. complete in all respects to the satisfaction of Engineer-in- Charge. (Excavation will be paid separately). (HSR 2021/20.55) 20.55.4) 10mm i/d ferrule on 80mm i/d pipes

Constructing brick masonry inspection Chamber sizes as given below up to 0.60 metre average depth in cement mortar 1 :5 lime concrete with 40 per cent lime mortar 2:3 in foundation cement concrete 1 :2:4 benching 12mm thick cement plaster 1 :2 with a floating coat of 1 mm thick of neat cement R.C.C. 1 :2:4 slab 100 mm thick/cement concrete topping, 50mm thick: with 455mmx455mm / 455mm x610mm inside with heavy duty SFRC cover & frame as per 1.5.1. specification painted with 3 coats of black bitumastic superior paint complete as per standard design. (HSR 2021/ 21.84) 21.84.2) Size 450 mm X 600 mm inside (with 455 mm x 610 mm cover and frame single seal pattern SFRC with heavy duty

Providing and fixing SFRC MANHOLE COVERS AND FRAMES MARKED WITH IS: 12592 including setting the same to correct lines and levels in 1 :3 cement sand mortar over manhole including carriage loading unloading stacking handling re-handling etc. complete in all espects to the satisfaction to the Engineer-in-charge. (HSR 2021 / 21.93) 21.93.2) Type:- Extra Heavy Duty Set (EHD-20) 560MM Clear Opening

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. (HSR 2021/22.14) 22.14.1) Semi rigid pipe 22.14.1.1) 32 mm dia

Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan. (HSR 2021/ 22.35)

Cutting chases in brick masonry walls for following diameter sand cast iron/centrifugally cast (spun) iron pipes and making good the same with cement concrete 1 :3:6 ( 1 cement : 3 coarse sand :6 graded stone aggregate 12.5 mm nominal size), including necessary plaster and pointing in cement mortar 1 :4 (1 cement : 4 coarse sand) : (HSR 2021/22.81) 22.81.2) 75 mm dia

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall (HSR 2021/ 22.85) 22.85.2) 20 mm nominal outer dia Pipes

22.85.3) 25 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work (HSR 2021/22.87) 22.87.2) 20 mm nominal outer dia Pipes

22.87.3) 25 mm nominal outer dia Pipes

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work· Exposed on wall (HSR 2021/ 22.88) 22.88.2) 20 mm dia nominal bore

22.88.3) 25 mm dia nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings including trenching up to 0.30m to 1.00m depth and refilling etc. External work (HSR 2021/ 22.91) 22.91.2) 20 mm dia nominal bore

22.91.3) 25 mm dia nominal bore

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) (HSR 2021/ 22.94) 22.94.2) 20 mm nominal bore

Fixing gun metal gate valve with C.I. wheel of approved quality (screwed end): (HSR 2021/22.98) 22.98.2) 20 mm nominal bore (labour Rate)

22.98.3) 25 mm nominal bore (Labour Rate)

Fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : (HSR2021/ 22.103) 22.103.2) 20 mm nominal bore (Labour Rate)

Fixing C.P. brass bib cock of approved quality conforming to IS:8931 (HSR 2021/ 22.104) 22.104.1) 15 mm nominal bore (Labour Rate)

Fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. (HSR 2021/ 22.105) 22.105.1) 15 mm nominal bore (Lbaour Rate)

Fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. (HSR 2021/22.107) 22.107.1) 15 mm nominal bore (Labour Rate)

Fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. (HSR2021/ 22.109) (Labour Rate)

Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1: 1 (1 cement : 1 fine sand) including testing of joints etc. complete: (HSR 2021/ 22.163) 22.163.3) 200 mm diameter

Fixing white vitreous chinaware extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous chinaware cistern / PVC cistern (with brass fitting) into the wall with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. (HSR 2021/ 22.33) (Labrour Rate)

Fixing 8 mm dia C.P. / S.S. Jet with flexible tube up to 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer - in - charge. (HSR 2021/ 22.38) (Labour Rate)

Fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms (HSR 2021/ 22.119.1) (Labour Rate)

Fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. (HSR 2021/ 22.127) (Labour Rate)

Lowering salt glazed stoneware pipes and specials into trenches for all depths and laying out the same to correct alignment gradient, level etc in trenches including all dressing and trimming of bed and sides of trenches, if required, trimming and cutting of concrete beds and joint holes, supporting the pipes and specials, in correct position in a suitable rigid manner while the same are being jointed and until the surrounding benching hunching and envelopes are completed. The sewer shall rest on the bed at every point throughout its length and to ensure this, it shall be grouted in without extra charge by the contractor with lime surkhi mortar, in the case of lime concrete beds and 1:3 cement sand mortar in the case of cement concrete beds including cartage from Divisional Store or nearest Railway station to site of work. The internal diameter of sewer being :- 200diameter (HSR 2021/ 21.38.4)

Fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. (HSR 2021/ 22.209) (Labour Rate)

Fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: (HSR 2021/ 22.166) 22.166.1) 100x100 mm size P type 22.166.1.1) With common burnt clay non-modular bricks of class designation 7 .5 (Labour Rate)

Providing and placing on terrace (at all floor levels) polyethylene waterstorage tank, IS: 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. (HSR 2021/ 22.181)

Fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) including Rack Bolt Screw Pair 115mm long without CP fittings complete in all respect. (HSR 2021/ 22.221) 22.221.2) Size 550 mm x 400 mm x 815 mm (Labour Rate)

Providing and fixing of casement & fixed windows made from multi chambered UPVC profiles of 56 to 68mm width in natural from stabilized for heat. Light, impact & UV radiation, the UPVC profiles should be reinforced with galvanized steel profiles of designed thickness. All openable sashes shall be having weather seal fitted in continuous lengths made from Bobble EPDM Rubber & side hung/top hung with up to 90 degree opening friction stays of SS 304 with provision of multipoint locking system made from Espag rods. All handle shall be made from Die Cast Zinc alloy (Model: ESPAG) BS- 1004A in white finish with suitable locking arrangement. The windows shall be fixed to opening suing expandable screws and friction stays that shall be able to with stand wind speeds up to 180 km/hr. The shoot bolts in windows shall be rust proof metallic coated steel. The window frames shall be fixed in masonry wall/RCC with necessary fasteners, nuts, bolts, washers, caps, silicon sealant etc. complete. (HSR; 12.131.2)

Providing and fixing of Cupboard made from wooden profiles complete in all respect. (NS)

Laying 80mm thick factory made cement concrete inter1ocking paver block of M -35 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over (BIS 15658:2006) and including 60mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.(HSR 10.77) (Labour Rate)

15 mm cement plaster on the rough side of single or half brick wall of mix : 1 :4 (1 cement: 4 fine sand)(HSR 11.6.1)

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc.complete.(HSR 30.22)

Fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1 :3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. 10.59 Providing and laying Ceramic glazed floor tiles (HSR 10.58) (Labour Rate)

Fixing white vitreous chinaware pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required W.C. pan with ISi marked black solid plastic seat and lid(HSR 22.23.2) (Labour Rate)

Fixing PTMT pillar cock of approved quality and colour 15 mm nominal bore, 107 mm long, weighing not less than 110 Gms(HSR 22.113.1) (Labour Rate)

Fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore(HSR 22.108.1) (Labour Rate)

Fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White vitreous chinaware Wash basin size 630x450 mm with a pair of 15 mm C. P. brass pillar taps White vitreous chinaware Wash basin size 630x450 mm with a pair of 15 mm C. P. brass pillar tapS (HSR 22.1.1) (Labour Rate)

Fixing toilet paper holder: vitreous chinaware (HSR 22.42.2) (labour Rate)

Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour, weighing not less than 300 gms.(HSR 22.120)

Fixing C.P. brass shower rose with 15 or 20 mm inlet: 100 mm diameter(HSR 22.102.1) (Labour Rate)

Fixing false ceiling at all heights with integraldensified calcium silicate reinforced with fibre and natural fillerfalse ceiling tiles of Size 595x595mm of approved texture, designand patterns having NRC (Noise Reduction coefficient) of 0.50(minimum) as per IS 8225:1987, Light reflectance of 85%(minimum). Non combustible as per BS:476 (part-4), fireperformance as per BS:476 (part 6 &7), humidity resistance of100%, thermal conductivity < 0.043 W/m K as per ASTM518:1991,in true horizontal level suspended on inter-lockingmetal T-Grid of hot dipped galvanised iron section of 0.33mmthick (galvanized @ 120 grams per sqm Including both sides)comprising of main-T runners of size 24x38 mm of length 3000mm, cross - T of size 24x32 specifications, drawing and as per directions of the Engineer-inCharge.(HSR 32.42.1) (Labour Rate) In case of any difference in the Unit & Nomenclature of any of the HSR Items of Civil, PH depiced in the DNIT and that given in HSR, the unit and nomenclature given in HSR shall be applicable. The agency to whom the workk has been allotted have to produce original bill/ voucher for all quantity in tokan of proof of purchase of material.