Estimate for Renovation or Modernization of T2 and T5 and T6 Type Quarters under Talwara Canal Division.

Dismantling brick work tile, masonry or tile lining in cement. Complete in all respect as per drawings,designs, specifications and instructions of Engineer- in-charge.

Removing Doors and Windows (Steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled.(a) Doors of area 3 sqm and below

Windows of area 3 sqm and below

Scraping Of White Wash & Colour wash

Centering and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc.

First class burnt brick work laid in cement sand mortar 1:6 in foundation and plinth

Cement concrete 1:2:4 gola 10cm x 10cm concave quadrant along junction of roofs with parapet wall finished smooth, where specially specified

Providing and fixing 110mm dia.U.P.V.C Rain water pipe of 4kgf./sqmasper IS:4985 including jointing during masonary complete as per specifications and to the entire satisfaction of Engineer-in- charge.

Providing and laying Anti skid Ceramic floor tiles of size 300x300 mm x 10 mm thick of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory , Grey, Fume Red Brown, laid on flooring skirting and dado in 12.5 mm thick cement plaster 1:3 in base and jointed with @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete white cement slurry in joints including corners angles and beading.

Providing and laying vitrified floor tiles of different sizes in light colour shades made using Double Charge technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete . (a) Size 600x600 mm

Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness.

Grouting the joints of flooring tiles having joints of 3 mm width, using 2mm to 3 mm gap using spacers and later this gap to be filled with cement based grout ) with Cement base grout and matching pigments etc., complete, including filling / grouting and finishing complete as per direction of Engineer-in-charge. (For 600 x 600 MM)

Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 200 x 300 mm, 100x200mm, 200x200mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss h/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 200 x 300 mm, 100x200mm, 200x200mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cementslurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying flamed finish Granite stone 18mm thick in flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent

Providing and laying 60 mm thick factory made cement concrete interlocking Paving blocks of M-35 grade manufactured by block making machine equipped with steel mould clamped to a strong vibratory table with hydraulic pressure for compaction of concrete as per IRC SP 63 -2014 and of approved size and design / shape laid in Ordinary Grey Colour and pattern over and including 40 mm Thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete as per directions of Engineer-in- Charge

12.5 mm thick cement plaster 1:4

Cement pointing 1:2 flush on flat brick flooring

Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work,metallic or plastered,concrete surface to give an even shade.

Applying priming coat with cement primer in all shade on newly plastered or concrete exterior surface

Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish

Wire Gauge Red meranti wood Sinker (20 to 21 kg per cft. Approx.) door shutter without springs housed in chowkats. (A) 35 mm thick

Providing and fixing bright finished brass door latch with necessary screws etc. complete : 250x16x5 mm

Providing & Fixing glass panes with nails and putty or wooden strip complete in all respect (b) Glazing area above 0.09 sqm (ii)4mm thick or 10.78 Kg/ sqm

Factory manufactured flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position (Code : IS 2202-1 (1999): (a) Commercial with elm or gurjan facing on both \ Sides with laminated core and lipped edges:- (iv) 35 mm thick

Providing and fixing helical door spring 150mm (superior quality) including necessary screws, complete (a) Brass helical spring

Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate z sections and other sections conforming to Is: 733 and IS : 1285 of Jindal, Hindalco, Mahavir or equivalent make approved by Engineer in Charge , fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC Plug/neoprene felt etc. aluminum sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, aluminum snap beading for glazing/paneling, C.P.brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-InCharge. (Glazing and paneling to be paid for separately) :(a) For fixed portion and chawkhats

(b) For shutters of doors, windows & ventilators including providing and fixing hinges/pivots and labour for fixing of fittings wherever required including the cost of PVC Plug / neoprene gasket required

Providing & fixing 6" stainless steel handles ISI marked on door & window frames complete in all respect as per the directions of Engineer-in-charge.

Providing & fixing 6" stainless steel tower bolts ISI marked on door & window frames complete in all respect as per the directions of Engineer-in-charge.

Providing and fixing aluminum Wire Mesh including cost of necessary fittings i.e. screws,u Type Beading etc. complete

Wrought iron & Mild steel ladders, framed grills, gratings etc. with ends of bars riveted or molded forged framed window guards, barred iron doors stair case iron railing etc. including cost of bolts and nuts, screws, welding rod complete fixing in position

Supplying and fixing of Japani sheet frames (Chowkat) consisting of 18 gauge (1.25mm) thick steel sheet of the specified section (standard design latest), including iron lugs (hold fasts) iron hinges conforming to PWD specifications including bolts for fixing steps, lock notch provision for receiving tower bolts and finished, fixed in position including the cost of cement concrete 1:3:6 for filling in the frame and cement concrete 1:2:4 for lugs complete to the satisfaction of Engineer-in-charge. (b) Door and window frame of size 113mmx60mmx with 35mm wide single rebate

Supplying and fixing of Japani sheet frames (Chowkat) consisting of 18 gauge (1.25mm) thick steel sheet of the specified section (standard design latest), including iron lugs (hold fasts) iron hinges conforming to PWD specifications including bolts for fixing steps, lock notch provision for receiving tower bolts and finished, fixed in position including the cost of cement concrete 1:3:6 for filling in the frame and cement concrete 1:2:4 for lugs complete to the satisfaction of Engineer-in-charge. (c) Doors and windows frame of size 151mm x 60mm with 35 mm wide double rebate weighing 3.95 kg per meter.

Furnishing and Placing Reinforced/Prestressed cement concrete in super structure as per drawing and Technical Specification RCC Grade M20 (a) For solid slab super-structure (i) Height up to 5m

Supplying, fitting and placing HYSD bar reinforcement in super-structure complete as per drawing and technical specifications.

CONCEALED IN WALL: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes as per IS 15778 (ISI marked with the prior approval of Engineer-in Charge), having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing including jointing of pipes & fittings, with one step CPVC solvent cement and testing of pipes complete as per direction of Engineer-in-Charge (c) CPVC SDR 11 Pipe & fitting 25mm o/d

Providing, fixing and jointing G.I Union Couplings(of approved make with the approval EIC) as per IS1879 in G.I. Pipe lines complete in all respect.(c) 25mm i/d G.I. Union

Provoiding, fixing and jointing ISI Marked gun-metal peet valves (Heavy Pattern) as per is 778 with hand wheels, on G.I. Pipe lines laid in the ground or inside buildings including all carriages complete.b) 20mm i/d Gun Metal peet valve heavy pattern.

Providing and fixing jet spray with 2'-6" long PVC pipe With C.P. Brass nut

Providing and fixing in position Chinaware European type water closet P trap or S trap of approved make (to the approval of the Engineer-in-charge) complete in all respect.

Extra for providing and fixing 10 litres capacity Chinaware low level flushing cistern with PVC internal fitting, instead of 10 litres capacity PVC flushing cistern.

Providing and fixing P.V.C Waste Pipe Collapsible 32mm complete in all respect.

Providing and fixing stainless steel Health faucet complete in all respect.

Providing and fixing vitreous chinaware pedestal of approved make(to the approval of Engineer-in-charge) for wash hand basin complete in all respect.(a) Vitreous chinaware standard white pedestal for wash hand basin.

Providing and fixing in position stainless steel sinks of approved make (to the approval of Engineer-in-charge) 1mm thick,grade-304 (18/8) with waste coupling complete in all respect. (c) Sink with drain board Overall Size 1070 x 464 x 200 & waste coupling.

Providing and fixing inposition towel rails / ring of approved make (to the approval of Engineer-in-charge ) fixed inwith rawl plugs embedded in walls with brass screws complete in all respect.(c) Acrylic towel Rails size 20mm dia 600mm long

Providing and fixing in position C.P. brass soap dish of approved mak e(to the approval of Engineer-in-charge) fixed into wall with rawl plugs andC.P brass screws complete in all respect.

Providing & Fixing in position 5mm thick bevelled edge mirror of superior glass (of approved make) complete with 4 mm thick hard board backing fixed in with rawl plugs 50 mm, C.P. brass screws and washer sand S/S Studson top complete in all respect (as required by the Engineer-in- Charge)a) Size 600mmx450mm

Providing & Fixing in postion 15 mm i/dbib cock of approved make (to the approval of Engineer-in-charge ) complete in all respect.(b) C.P. brass Bib cock foam flow without flange

Providing & Fixing In postion stop cock/Angle valve of approved make (to the approval of Engineer-in-charge ) complete in all respect.(c) C.P.brass 15mm Angle valve without flange

Providing & fixing in position premium range C.P Brass Fittings and accessories of Approved make (to the approval of Engineer-in-charge) complete in all respect. (iv) C.P brass 15mm concealed stop cock with adjustable wall flangewith seal.(Outer +Inner Body)

Providing & fixing in position premium range C.P Brass Fittings and accessories of Approved make (to the approval of Engineer-in-charge) complete in all respect. (v) C.P. brass 3-Hole Basin Mixer Without Popup Waste System.

Providing & fixing in position PVC flexible tube connection of approved make(to the approval of Engineer-in-charge ) complete in all respect (b) PVC tube connection of size15mm x 450 mm with C.P. Brass nut

Providing and fixing in position SS Grating with frame of approved make (to the approval of engineer in charge) complete in all respects.

Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes as per as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining. B. For 110mm o/d pipes (v) Elbow 90 Degree (All side socketed)

Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes as per as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining. B. For 110mm o/d pipes (ix) P Trap/Floor Trap 110mm x 110mm

Cutting chase in brick walls in cement or infloor for embedding G.I.or C.I pipes line and making good the same to its original condition.(a) Size 75 mm x 75 mm

Providing and fixing in position automatic brass Ball Cock in tanks © 25mm i/d

Providing & placing in position on terrace (a tall floor levels) HDPE water storage tanks of approved make(to the approval of Engineer-in charge) with cover with suitable locking arrangement and making necessary holes for inlet,outlet and over flopipes but without fittings and base support for tank. (i) Triple Layer Tanks

Providing and fixing in position G.I tank Nipple of approved make (to the approval of Engineer-in-charge) complete in all respect. G.I tank nipple 20 mm i/d

Raking out joints in lime or cement mortar and preparing the surface for repointing or replastering including disposal of rubish to the dumpingg round within 50m lead

Providing and fixing curtain rail 1.90cm Chrome-plated with end bracket. Including sockets and brackets.

Edging of paths/ beds with bricks/tiles laid dry, including required excavation, refilling, consolidating with hand and spreading surplus e) Tiles laid lengthwise with half tile depth

RECESSED PVC CONDUITPIPE WIRING SYSTEM WITH MODULAR SWITCHES: Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to beaid in heavy gauge PVC conduit pipe 20mm/ 25mm dia. (ISI Marked) recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC onnector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1½" deep for walls and CI 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases

Wiring light point

Wiring 3 pin 6 Amp. wall socket point.

Wiring call-bell point

PVC INSULATED FR COPPER CONDUCTOR CABLES: Supply and erection of PVCi nsulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990left bare in pipe or casing of suitable size complete inall respect as desired by the Engineer-in-charge:Overall size 1.5sq.mm (Un-sheathed)

PVC INSULATED FR COPPER CONDUCTOR CABLES: Supply and erection of PVCi nsulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990left bare in pipe or casing of suitable size complete inall respect as desired by the Engineer-in-charge:Overall size 2.5sq.mm (Un-sheathed)

PVC INSULATED FR COPPER CONDUCTOR CABLES: Supply and erection of PVCi nsulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990left bare in pipe or casing of suitable size complete inall respect as desired by the Engineer-in-charge:Overall size 4sq.mm (Un-sheathed)

PVC, HDPE PIPES & PVC FLEXIBLE PIPES:Supply& erection of PVC pipes & HDPE pipes (fire retardant) for wiring purposes including bends, inspection boxes etc., where necessary including other petty material as per PWD General Specifications:-Heavy gauge PVC conduit pipe 25mm dia. ( on surface)

XLPE INSULATED UN-ARMOURED CABLES (ON SURFACE): Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed Un-armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid (On Surface) as per PWD General Specifications:- (iii) Overall size 16sq.mm (2Core) Un-armoured (On-Surface)

SUPPLY AND ERECTION OF WIRING ACCESSORIES:Supply and erection of switches, sockets, power switch and sockets and other accessories (flush piano type/ modular accessories) in the existing bakelite/ modular cover frame including connections and petty material etc.6/10amp. One Way Modular Switch (One Module)

16/20amp. One Way Modular Switch with Indicator (One Module)

6amp. 2/3 Universal Modular Shuttered Socket (two Module)

16/20amp. Universal Modular Shuttered Socket (two Module)

25amp. Universal Modular Shuttered Socket (two Module)

Step type Modular Electronic Fan Regulator 100 watts (One Module)

Bakelite Batten Holder (Large size)

MINIATURE CIRCUIT BREAKERS/ RCBO's/ RCCB's:Supply and erection of Miniature Circuit Breakers/ RCBO's/ RCCB's in the existing MCB distribution board as per PWD General Specifications 2010 including connections with suitable size of thimbles/lugs.MCB Single Pole 6-32amp. (10kA, Curve-C)

MCB Double Pole 40amp. (10kA, Curve-C)

SHEET METAL DOUBLE DOOR DISTRIBUTION BOARD FOR MCB's/ RCBO's/ RCCB's:Supply and erection of sheet metal Double Door Distribution Boards IP 43- IK09 metal door (dust protected) as per IS 8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars, shrouded neutral bars, earth bars, cement spill protector, colorcoded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting miniature circuit breakers/ RCBO's/ RCCB's in the distribution board (For SP&N distribution board with provision DP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings and for TP&N horizontal distribution board with provision TPN/ FP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings) as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc:- (i) SP&N Double Door Distribution Board 4 way each

CFL/LED lamp 14 Watt Philips

20 W Tubeset Crompton

Street Light 30 W Crompton

Exhaust Fan 12'' Orient

Any Other Item

# of occurrences