ANNUAL REPAIR AND MAINTENANCE OF PUNJAB AND HARYANA HIGH COURT BUILDING UNDER C-9, SUB DIVISION, CHANDIGARH (REPLACEMENT OF WODDDEN ALMIRAH CABIN NO. 184(B-29), REPLACEMENT OF TOUGHENED GLASS AT GATE NO. 5, WODDEN CABINET/FRAME VIDEO CONFERENCE IN CO

Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour Old work (one or more coats) DSR 13.81.1

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. One coat DSR 13.82.1

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: One or more coats on old work DSR 13.99.1

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade Old work (one or more coats applied @ 0.83 ltr/10 sqm). DSR 13.112.2

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.DSR 13.80

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. DSR 13.91

Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of nominal thickness 5 mm (weight not less than 12.5kg/sqm) DSR 14.5.2

Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) DSR 14.5.1

French spirit polishing : Two or more coats on new works including a coat of wood filler DSR 13.68.1

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws DSR 9.21.1

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. DSR 9.83

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm DSR 9.100.1

Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete (Copper oxidised as per IS 1378) 250x10 mm DSR 9.63.1

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 250x16 mm DSR 9.96.2

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 150x10 mm DSR 9.97.4

Providing and fixing special quality chromium plated brass cupboard locks with six levers of approved quality including necessary screws etc. complete. Size 40 mm DSR 9.90.1

Providing and fixing 1mm thick mica (Formica, Kit, Archid or tis equivalent) of approved shade and quality on commercial surface fixed in position by means of fevicol and nails etc. (As per sample approved by Hon'ble Building Committee, Punjab and Haryana High Court, Chandigarh) complete in all respect to the entire satisfaction of Engineer in Charge. NS

Providing and fixing 4mm thick teak ply (ISI marked) with exisitng wooden members including the cost of nails, fevicols etc. complete in all respect to the entire satisfaction of Engineer-in-charge.

Providing and fixing 6mm thick commercial ply (ISI marked) on the exisitng wooden members including the cost of nails, fevicols etc. including painting two coats of synthetic enamel paint over one coat of primer complete in all respect to the entire satisfaction of Engineer-in-charge.

Providing and fixing of plyboard consisting of 18 mm thick commercial ply(ISI marked) phenol bonded fixed with hard wood battens and gutties including the cost of necessary lipping screws, nails, fevicol complete in all respect and to the entire satisfaction of the Engineer in charge. N.S

Providing and fixing 12 MM toughened Glass of approved brand and make in existing frame of window partition including fixing with clamps, screws, putty beading on Both sides as required and making necessary holes etc. including all accessories for fixing all complete as per direction of Engineer In Charge

Providing and fixing of roller blind of make "Wishade (code2129)" with complete accessories including te cost all required fitings the roller blinds are tobe installed as per the shade & code already aproved by the Hon'ble Building of Punjab and Haryana High Court in the complete in all respect to the entire satisfaction of Engineer in Charge. NS

Providing and Fixing readymade profile matching with the wooden flooring complete in all repsects and to the entire satisfaction of the Engineer in charge

Please Enable Macros to View BoQ information