Annual maintenance to OTM Accn DIV zone and repairs to certain Misc BR items under

Amount

M&L for vitrified tiles light shade 9-10 mm thick ( Square or rectangular) polished, area of each tile exceeding 0.36 sqm in floors etc, set and jointed in neat cement slurry and pointed in coloured cement (to match) laid over 15mm thick screed bed in CM (1:6) including dismantling of tiles, bedding layer of mortar, rubbish off the premises complete all as specified and directed.

All as per item 1 above but on verticle surface (skirting /dado etc) laid over bedding layer of mortar 10mm thick in CM (1:4)

All as per item 2 but glazed ceramic coloured tiles (joint free) in vertical surface 450x300x7mm.

All as per item 1 but 7-8 mm thick non skid ceramic coloured tiles (joint free) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm.

M&L Marble work 15-16mm thick (table rubbed and polished) in cooking plateform window cill etc in cement mortar including pointing in white cement (1:2) using marble dust with admixture of pigment to match set and jointed in neat cement slurry and pointed in coloured cement (to match) laid over 15mm thick screed bed in CM (1:6) including dismantling of existing marble work, bedding layer of mortar, rubbish off the premises complete all as specified and directed.

Taking down chowkhats of frames n.exc 1.50 sqm with shutters (without taking off shutters from the frames), removal from site complete all as specified and directed.

All as per Srl Item No 6 but exceeding 1.5 Sqm and n.exc 4 Sqm

Taking down shutters of any description exc 1 Sqm but n exc 2 Sqm each, removal from site complete all as specified and directed.

Taking down shutter 1 Sqm to 2 Sqm and refixing in same opening safely, (including minor repair) complete all as specified

Taking down shutter exc 1.0 Sqm but n exc 2.0 Sqm removal from site complete all as specified and directed.

Taking up or down steel water tubing and connections including cleaning for refixing or removal to store for bore of pipe 15mm bore dia complete all as specified and directed.

S&F 15mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc all including taking down as specified.

All as per Srl item No 12 but fixing only

All as per item 12 but 20mm bore

All as per item 13 but 20mm bore

All as per Srl item No 15 but fixing only

S&F in repair for gun metal gate valves with iron wheel head, screwed both ends, butterfly handle for iron pipe 20mm bore dia complete all as specified and directed.

All as per item 17 but 15 mm bore dia

M&L cutting chases pinning in brick masonery and making good to facing where required and pointing in cement mortar, making good in CM 1:3 cutting n.exc. 10cm in girth complete all as specified and directed.

S&F in reapir CP (brass) Towel rail 24" size, dia 3/4" complete all as specified and directed.

S&F Anti cockroach grating of stainless steel size 100mm dia ( as per sample ) fixed in repair including making good to existing floor complete all as specified and directed.

S&F in repair 20mm dia of pipe, ball brass float valves, high pressure, with polythene float and nut compete, screwed for iron pipe or bress ferrule and fixed complete all as specified and directed.

S&F in repair urinal spreader of PTMT any colour and fixed for 15mm dia pipe complete all as specified and directed.

S&F in repair toilet paper holder of brass, chromium plated or stainless steel fixed to wall with chromium plated brass screws complete all as specified and directed.

S&F in repair glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing complete all as specified and directed.

S&F in repair 32mm dia PVC waste pipe (as per sample) complete all as specified and directed.

S&F in repair Vitreous china urinal, half stall type, white ( exclududing flushing cistern, flush pipe and waste pipe) complete all as specified and directed.

S&F in repair 15mm bore dia concealed type angle valve / stop valve cast copper alloy, chromium plated, fancy type with long shank and cup, ISI marked with crutch or butter fly handles screwed down, screwed for iron pipe complete all as specified and directed.

S&F in repair Brass chormium plated shower rose 125 mm size with or without swivel joints including fixing to steel pipe or union as specified & directed.

M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:6), finished even and fair without using extra cement including taking down cement plaster on brick walls or stone walls of any description etc including raking out joints, hacking for key, scrubbing down with water etc, rubbish off the premises complete all as specified and directed.

All as per item 30 but rendering 5mm thick cement plaster in cement mortar (1:3) as in ceiling.

M&L preparation of new plastered surface of walls, applying wall care putty to obtain even and smooth surface (any thickness) and applying two coats of oil emulsion distemper complete all as specified & directed.

M&L three coats of white wash on newly plastered surface including preparation of surfaces complete all as specified & directed.

M&L for two coats of white wash on newly plastered surface of ceiling including preparation of surfaces complete all as specified & directed.

Supply only polimer liquid water proofing compound complete all as specified & directed.

M&L for Preparation of old surface after complete removal of existing treatment, applying wall care putty to obtain even and smooth surface (any thickness), applying two coats of oil emulsion distemper complete all as specified & directed.

M&L for one coat of white wash on old plasterd surface of ceiling including prepareation of surface complete all as specified & directed.

M&L Preparation of old plastered/unplastered surfaces of walls by scraping down smoke soot, mould moss and effloroscent salts, tading oil & greasy spots including filling of cracks and small holes with crack filling paste, making even and smooth with applying whitening and applying two coats of white wash complete all as specified and as directed.

M&L for preparing old painted steel and iron surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

All as per item 39 but on wood & wood based surfaces.

Disconnecting, taking down existing tanks from roof slab/ staging of single/double/triple story bldg, lowering and removal as directed, S&F 500 litres capacity rotational moulded poly ethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including necessary tank nipple complete all as specified and directed.

All as per item 41 but capacity 1000 Litres

S&F in repair PVC Lid for water tank of Capacity 500 Ltr to 1000 Ltr , complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints, fixed to walls, including taking down old RCC/PVC unserviceable rainwater pipes ( any size or pattern) including all fittings, removing from site complete all as specified and directed.

S&F in repair 110mm bore PVC (SWR) bend, complete all as specified and directed.

S&F in repair for stack clamps made out with flat Iron of size 25mmx4mm thick, including bolt & nuts (as per sample) and securing ends to wall suitable for 100/110mm bore pipes completed all as specified and directed.

M&L Cement concrete in shunken portion, filling in mass concrete, Type E2 1:5:10 (using 40mm graded stone aggregate) complete all as specified and directed .

M&L for 25 mm thick cement concrete B-0 , 1:2:4 ( using 12.5 mm graded stone aggregate) as in sub floor mixed with WPC as per manufacturer's instruction complete all as specified and as directed. Note: WPC shall be measured and paid for under respective item of BOQ/Schedule 'A'.

S&F Box type steel windows and ventilators comprised of tubular frame and shutters made out of 1.25 mm thick M S sheet tube factory made with double side shutters wire gauged shutter & glass glazed shutter (wire cloth and glass panes only shall be measured and paid seperately) with side hung shutters with steel handle and steel peg stay dovetailed or welded including 2 Nos tower bolts 150 mm long for each leaf and 10 mm square bar grills at spacing as shown on drg welded to FI frame work, including other fittings, hinges, handles, tarred hold fasts, PCC blocks etc all as shown on drg No CEPZ/TD-354/09 sheet 1/3 to 3/3 including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F pressed steel frame made out of MS sheet 1.25mm thick of size 125x60mm for doors/windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including filling of concrete 1:3:6 type C-0 (12.50 mm graded aggregate) back of chowkhats and applying two coats of synthentic enamel paint over shop coat of primer complete all as specified and directed.

All as per item 50 but of size 105x60 mm.

S&F 2nd class hard wood 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass or gauge etc ( divided into squares with plain chamfered or rounded, mitred and rebated sash bars, any numbers), edges of framing plain chamfered or rounded, fitted with cut and mitered beads and fitted to chowkats for securing glass/gauge, size of stiles rails and other parts as per clause 8.24 (a) of SSR Part-I complete all as specified & directed.

S&F 35mm thick factory made plain framed panelled shutters of 2nd class hard wood, two panel with lock rail and panel of 9mm thick BWP commercial ply. The size of rail and style as per IS-1003 (Part-I) Kiln seasoned and chemically pressure treated complete all as specified and directed.

M&L preparation of wood or wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a shop coat of primer complete all as specified and directed.

S&F factory made wood grain colour solid pannel PVC door shutter 30mm thick ( style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour & as gap insert for top rail & bottom rail Panelling of plain colour sheet to be fitted in MS frame welded / sealed to stiles & rails with suitable PVC sheet beading and joined together with solvent cement , supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed.

M&L Soild PVC door frame wood grain color coated of size 50mm x 95mm made out of 5mm wood grain colour PVC sheet reinforced with MS Sqaure tube , supply and fixed in opening as per specification & drawing complete all as specified and directed.

S&F 100 mm long Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed.

M&L for repair to Old steel window shutter not exc 1 Sqm including replacement of hinges, Handle, and necessary welding to shutter and chowkhat for making window in serviceable condition, complete all as specified and directed.

S&F aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded setion or cast aluminium alloy and fixed 250 mm long complete all as specified and directed.

S&F anodised aluminium barral tower bolt extruded section 200 mm size complete all as specified and directed.

S&F anodised aluminium handle cast type 150 mm size complete all as specified and directed.

Hacking out old broken glass ( any thickness , size, quality, or description) from wooden frame glazed with putty or fixed with beads, rubbish off the premises complete all as specified and directed.

S&F frosted glass, pin head type 3 mm thick ordinary quality and glazing with oil putty n.exc 0.5 Sqm in each pane complete all as specified and directed.

All as per item 63 but plain 3mm thick sheet glass.

S&F Mild steel 300mm rat rail rod pattern springs including roller & roller plate complete all as specified and directed.

S& F in repair MS helical door spring 150mm size fixed to steel frame complete all as specified and directed.

S&F for stainless steel wire cloth 0.38 mm nominal dia of wire and average width of aperture 1.40 mm fixed with tinned tacks, or wire staples complete all as specified and directed.

All as per item 67 above but S&F in repair.

S&F in repair Angular Stop cock 15mm bore dia, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repair Bib taps for 15 mm bore dia, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

All as per item 70 but long body

S&F in repair pillar tap 15 mm bore dia, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lette ed 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F centre hole basin mixer with out popup waste & 450 mm long braided hoses for 15mm pipe, cast copper alloy chromium plated fixed in repairs complete all as specified and directed.

S&F in repairs Vitreous china wash basin, white flat back,size 550 x 400 mm including waste pipe , brackets and cutting for and pinning in ends of brackets or errecting stand with waste coupling and 32 mm dia waste pipe complete all as specified and directed.

S&F CI floor trap 75mm with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 with CP grating with or without hole for waste pipe complete all as specified and directed.

S&F in repair health foucet hand shower 8mm dia 1m long flexible hook and wall hook (as per sample) complete all as specified and directed.

S&F in repair low level PVC flushing cistern 10 ltr capacity including PVC connection inlet and outlet connections, brackets, PVC flush pipe with bend 32 mm dia of suitable length including making necessary connections to water supply pipe line and jointing to WC complete all as specified and directed.

S&F Vitreous china wash down water closet pan pedestal pattern, white (excluding supply of flushing cistern and flush pipes, but including fixing thereof), including making connections to trap, and to flush pipe including plastic seat and cover (as directed ) with stainless steel or aluminised hinging device and fixed in repair complete all as specified and directed.

S&F Seat cover plastic for water closet, closed pattern with flat bottom and cover, mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F PVC connections 15mm with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repair 20mm dia mild steel fancy type dropery rod, wooden shade with PVC bracket and PVC fenial fixed over doors and windows with steel screws and PVC rawl plug/ cleat complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not specifically provided and removal of rubbish to a distance exc 100m but not exc 150m complete all as specified and as directed.

M&L PCC 1:2:4 type B-0 using 12.50mm graded stone aggregate in roof padding, surface finished even and smooth without using extra cement complete all as specified and as directed.

M&L for cement concrete (1:2:4) type B1 ( using 20 mm graded crushed stone aggregate) as in repair to Chajjas, roof projection, kerbs (gola to joint with parapet etc) and the like rounded or chamfered on edges including necessary form work complete all as specified and as directed.

M&L 20mm thick cement plaster in cement mortar 1:4 on concrete surface, surface finished even and smooth using WPC (liquid) as per manufacturer instruction or @ 0.200 ltr in 50 Kg of cement complete all as specified and as directed

M&L for APP modified roof treatment over existing non-accessible RCC roof slab / chajjah / canopy / parapet wall (to be executed through approved applicator of the membrane manufacturer) with following specification etc complete all as specified and directed :- (a) Cleaning existing surface properly, applying oil bound bitumen primer @ 0.30 liter/Sqm manufacture by the same agency as that of APP with a density 0.87-0.89 Kg per liter at 25 degree centigrade on prepared surface, laying not less than 3.0mm thick APP modified water proofing membrane, weighing not less than 3.60 Kg/Sqm, reinforced with non woven polyster fiber weight not less than 160gsm/Sqm using butane torch by torch application with 10cm side laps and 15cm end lap. (b) Top of membrane shall be provide with solar reflective bituminous aluminum paint @ 0.1 Kg/Sqm as prescribed by manufacture of membrane.

Demolition of brick work or stone masonry built in cement mortar including all quoins arches, pillar etc but excluding ashlar facing , dressed stone work and precast concrete articles, rubbish of the premises complete all as specified and directed

M&L for brickwork with fly ash bricks (old size) straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and directed

All as per item 89 but except bricks of any type.

M&L for brick work with fly ash bricks (old size), straight or curved on plan to any radius in half brick thick walls, built in built in CM 1:4 including demolition of old bricks in drains complete all as specified and directed

M&L for 75mm thick PCC 1:2:4 type B-1(using 20 mm graded crushed stone aggrigate) laying in alternete panels as in pathways with chequered finish complete all as specified and directed

S&F Machine pressed precast concrete coloured interlocking paver block with glossy finished of any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade including joint filling with gray cement and pigment to match the shade complete all as specified and directed

ditto- as above item No. 93 of 80 mm thickness M-40 Grade

M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed

M&L for 75 mm thick Cement concrete type D- 2, 1:4:8 (40mm graded crushed stone aggregate) in Sub -base, floor and pavings etc complete all as specified and directed

M&L for Screed bed or bedding layer of mortar in CM (1:6) 15 mm thick for laying floor finishes complete all as specified and directed

M&L for Chequered heavy duty industrial tiles 10mm thick (sqaure/ rectangular) area of each tile exc.0.06 sqm but not exc. 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for 100 mm thick PCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregete as in Path/hard standing Concrete laid in alternate panels & brooming the surface for depth of 2-3 mm complete all as specified and directed

M&L for laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required including demolition of old kerb stone by excavation in any type of soil, removal & laying complete all as specified and directed

M&L cement concrete 1:3:6 type C1 (using 20mm graded crushed stone aggregate) as in surface channel and drains complete all as specified and directed

M&L extra for forming fair finished drain or channel any inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed

M&L for providing precast cement concrete Type B0 1:2:4 (12.5mm graded crushed stone aggregate) louvres and jallies, 25mm thick (measured solid), Set in cement mortar 1:4 including all mouldings and demolition of old jallies complete all as specified and directed

Taking down cement plaster on brick or stone walls including raking out joints, hacking for key, scrubbing down with water etc and rubbish off the premises complete all as specified and directed.

M&L for rendering 10 mm thick in cement mortar 1:4 on fair face of brick work or concrete surface finished even and smooth without using extra cement complete all as specified and directed

M&L for two coats of cement base paint on new plastered surface of wall including one coat of primer & preparation of surface complete all as specified and directed

M&L for one coat of white wash including preparation of old surfaces of walls etc complete all as specified and directed.

Demolition of reinforced cement concrete ( reinforcement cut to facilitate demolition ) of any description and in any position not otherwise specifically provided for, rubbish off the premises complete all as specified and directed

M&L for Precast cement concrete 1:2:4 type B-I ( using 20 mm graded stone aggregate ) as in cover slabs ( for manholes etc.),chullah hoods, chajjas , shelves and similar articles with plain faces ,set in cement mortar 1:4,complete all as specified and directed

S&F TMT steel bars 6 to 8mm dia in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with MS wire (annealed not less than 0.9mm dia) complete all as specified and directed

S&F frame work such as door or gates, grating etc, including hooks, hold fast, locking, hanging arrangement, fastening and fixing posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc. complete to similar work conferming to fe-290 Gde E-165 including dismantling existing structure etc complete all as specified and directed

M&L for preparation of old steel surface/kerb stone surface of any description not otherwise described over 10 cm width or girth and applying one coat or more coat (to obtain desire surface) of synthetic enamel paint complete all as specified and directed

M&L for plain Cement concrete 1:3:6 type C2 (using 40mm graded crushed stone aggregate) in foundations, filling and mass concrete etc complete all as specified and directed

Dismantling of reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches after excavation, if required complete all as specified and directed

M&L for 300 mm bore Reinforced concrete pipes, class NP2, laid and jointed complete with collars complete all as specified and directed

M&L for 150 mm thick Concrete bed to drain pipes 300 bore including packing under, and haunching against the sides & surrounding of pipes after they are laid and tested; in cement conctrete type C-2, 1:3:6, using 40 mm graded crushed stone aggregate complete all as specified & directed.

M&L for PCC 1:3:6 Type C1 (using 20 mm graded crushed stone aggregate) as in cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs , water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed

Deduct: Total amount of SCHEDUL 'A' SECTION-II (SCH OF CREDIT) Rs 49670.00 ( to be deducted from Schedule ‘A’ (BOQ) to arrive at the Contract Sum.

M/S J N TRADERS

M/S DUGGAL CONSTRUCTION CO

RAJBEER ENGINEERS

M/S VIJ CONSTRUCTION CO

M/s Rajeev Vashist

RD Engineers