Construction of Sugam Centre and creating additional office space for SDM office Chamba (SH Construction of First floor

Amount

Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Columns, pillars, posts and struts square rectangular or polygonal in plan including all taxes, GST carriage of material within all leads and lifts and as per the direction of the engineer-in -charge and other incidentals.

Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Beams, cantilever, girders and lintels. Sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels upto all depth and in all heights from floor including all taxes, GST carriage of material within all leads and lifts and as per the direction of the engineer-in -charge and other incidentals.

Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Flat surfaces such as soffits of suspended floors, roofs, landings and the like floor etcetra upto any thickness including all taxes, GST carriage of material within all leads and lifts and as per the direction of the engineer-in -charge and other incidentals.

Providing and laying mechanically mixed & vibrated cement concrete M-20 (M-Twenty design mix) to obtain the minimum compressive strength of 20N/square MM (Twenty newton per square millimetre) with cement contents not less than 320 Kg/Per cubic metre ( Three hundred twenty kilograme per cubic metre) and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in columns, pillars, posts and struts upto floor all levels as per the directions of the Engineer-in-charge including all taxes, GST carriage of material within all leads and lifts and other incidentals.

Providing and laying mechanically mixed & vibratedcement concrete M-20 (M-Twenty design mix) to obtain the minimum compressive strength of 20N/square MM (Twenty newton per square millimetre) with cement contents not less than 320 Kg/Per cubic metre ( Three hundred twenty kilograme per cubic metre) and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in suspended floors, roofs, landing, shelves and their support, balconies, beams, girders, bressumers and cantilever upto floor all levels as per the directions of the Engineer-in-charge including all taxes, GST carriage of material within all leads and lifts and other incidentals.

Providing tor steel TATA made reinforcement for reinforced cement concrete work including straightening, bending, binding and placing in position complete as per the directions of the Engineer-in-charge including all taxes, GST carriage of material, carriage of material within all leads and lifts and other incidentals.

Half brick masonry using second class common brunt building brick of approved quality in super structure above plinth level upto floor all levels in cement mortar 1:4 (one cement isto four sand) curing complete including all taxes,GST and carriage of material, as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.

Second class brick work using common brunt clay building bricks of approved quality in super structure above plinth level upto floor all levels in cement mortar 1:6 (one cement isto six sand) curing complete including all taxes,GST and carriage of material, within all leads and lifts and as per the direction of the Engineer-in-charge and other incidentals.

Providing and fixing 40 mm (forty millimetre) thick panelled and glazed shutter with panel of 12mm (twelve millimetre) thick both side preliminated water proof particle board made of Action Tesa/ Cantuary/ Kitlam / Green ply below lock rail and 6mm (six millimetre) thick glass panes of modi guard above lock rail in 2nd class deodar wood for door including bright finished / black enamelled iron but hinges with necessary screws complete as per specifications and directions of the Engineer-in-charge including all taxes ,GST and carriage of material within all leads and lifts and other incidentals.

Providing and fixing anodized aluminium sliding door bolt anodized colour and shade with bolts and nuts screws etcetra complete 250x16 mm (two hundred fifty into sixteen millimetre) including all taxes,GST and carriage of materials within all leads, liftsas per specification as per the direction of the Engineer-in-charge and other incidentals.

Providing and fixing aluminium tower bolts (barrel type) anodized transparent or dyed to required shade and colour with screws etcetera complete 200 X 10 mm (two hundred into ten millimetre) including all taxes,GST and carriage of materials within all leads, lifts as per specification and as per the direction of the Engineer-in-charge and other incidentals.

Providing and fixing aluminium handles anodized transparent or dyed to required colour and shade with necessary screws etcetera complete 125 mm (one hundred twenty five millimetre) including all taxes ,GST and carriage of materials within all leads, lifts as per specification and as per the direction of the Engineer-in-charge and other incidentals.

Providing & Fixing anodized aluminium work in fixed partition with 14 ( fourteen) gauge thick sheet of aluminium 63 x 38 mm ( sixty three into thirty eight milimetre) section, half panel of 8 mm ( eight milimetre) thick prelaminated board and 8 mm ( eight milimetr thick plain glass in top portion complete air tight by providing neorpean gasket or silicon layer or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing & Fixing anodized aluminium work in shutter with 14 ( fourteen ) gauge thick sheet of aluminium 63 x 38 mm ( sixty three into thirty eight milimetre) section, half panel of 8 mm ( eight milimetre) thick prelaminated board and 8 mm ( eight milimetr thick plain glass in top portion complete air tight by providing neorpean gasket or silicon layer or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 19mm (ninteen millimetre) thick both side pre laminated commercial board water prooof i/c fixing with nickel , screws etcetera complete including all taxes ,GST and carriage of materials within all leads, lifts as per specification and as per the direction of the Engineer-in-charge and other incidentals.

Providing and fixing 6mm (six millimetre) thick ply wood lining with butt jointing end nails frame work and cover fillets to be measured and paid for separately) including all taxes ,GST and carriage of materials within all leads, lifts as per specification and as per the direction of the Engineer-in-charge and other incidentals.

Providing and fixing aluminium handles anodized transparent or dyed to required colour and shade with necessary screws etcetera complete 75 mm (seventy five millimetre)including all taxes ,GST and carriage of materials within all leads, lifts as per specification and as per the direction of the Engineer-in-charge and other incidentals.

Providing and fixing bright finished brass ball catcher including all taxes ,GST and carriage of materials within all leads, lifts as per specification and as per the direction of the Engineer-in-charge and other incidentals.

Providing and fixing 65x35mm ( sixty five into thirty five millimetre) indian make of approved quality bright finished brass cup board or wardrobe locks with six leaversincluding all taxes ,GST and carriage of materials within all leads, lifts as per specification and as per the direction of the Engineer-in-charge and other incidentals.

Providing and fixing M.S. plain grills 10x10mm (ten into ten millimetre) square or round bars in combination of 20x4mm (twenty into four millimetre) M.S. flat as per detail of required pattern in frames of windows etc.with M.S.Flats, square or round bars with round headed bolts and nuts or by screws including all taxes and carriage of materials within all leads, lifts, GST as per specification as per the direction of the Engineer-in-charge and other incidentals. within all leads and lifts and as per the direction of the Engineer-in-charge and other incidentals.

Providing and laying vitrified floor tiles double charged size of 600 x 600 mm ( six hundred into six hundred millimetre) of Kazaria in flooring (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm ( twenty millimetre) thick cement mortar 1:4 ( one cement isto four coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm ( three point three kilogram/ per square metre) including grouting the joints with white cement and matching pigments etcetera complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing & laying 25 mm ( twenty five millimetre) Kota stone single slab flooring in treads of steps or riser of steps having semi/ round nosing over 20 mm ( twenty millimetre) (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, with base of cement mortar 1 : 4 ( one cement four coarse sand) including rubbing and polishing complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing non slippery Ceramic floor tiles of Kazaria/ Somany/ jonhson/Orient-Bell of size 300x300 mm ( three hundred into three hundred ) (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm ( twenty millimetre) thick bed of cement mortar 1:4 (one Cement isto four Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm ( three point three kilogram/ per square metre) including pointing the joints with white cement and matching pigments etcetera complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 1st quality ceramic glazed tiles of Rak/ Kazaria/ Somany/ jonhson/Orient-Bell conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in- Charge in skirting, risers of steps and dados over 12 mm ( twelve millimetre) thick bed of cement Mortar 1:3 (one cement isto three coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm( three point three kilogram/ per square metre) including pointing in white cement mixed with pigment of matching shade complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing steel door, windows, ventilaters and clerestory windows frame manufactured from M.S. channal 75x40x4mm (Seventy five into fortyinto four millimetre), size M.S. angle 25x20x3mm (twenty five into twenty into three millimetre) M.S. T-Section 25x25x3mm (twenty five into twenty five into three millimetre) size vertically welded with M.S. flat 75 X 4mm (Seventy five into four millimetre) for central frames with split to end tail to each jambs including joints and miterd and welded with 16 X 3.15mm (Sixteen into three point five millimetre) lugs 10cm (ten centimetre) long embedded in cement concrete block 15cm X 10cm X 10cm (Fifteen centimetre into ten centimetre into ten centimetre) size of 1:3:6 (one cement isto three sand isto six graded crushed stone aggregate twenty millimetre nominal size) with provision for locking arragnement and shock observor fixed with by mechanical means lugs and curing complete including applying a coat of approved steel primer after pretreatment of the surface as specified including all taxes, GST ,carriage of materialwithin all leads and lifts as per specification as per the direction of Engineer-in-Charge and other incidentals.

Providing and fixing double rebate steel windows side hung one glazed and other wire gauge of standard rolled steel sections joints mitred and welded with mechanical means to relevent ISI standard specification frames and in M.S. Tee section 25X15X3mm (twenty five millimetre into fifteen millimetre into three millimetre) including glazing clips or pins, glass panes, M.S. wire mesh 4 designation 85 (eighty five) SWG and M.S. fitting as required including providing and fixing of projecting, hinges, tower bolts, handles, hooks and eyes, presty, locking arrangment spring catch etcetra and providing and fixing wire mesh fly proof including fixing with special metal sesh putty of approved make complete including applying a priming coat of red lead paint within all leads and lifts ,GST and as per the direction of the Engineer-in-charge and other incidentals.

Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter with Readymixed paint brushing wood primer pink as per the directions of the Engineer-in-charge including all taxes ,GST and carriage of materials within all leads, lifts as per specification and as per the direction of the Engineer-in-charge and other incidentals.

Painting two or more coats of Asian/Nerolac (excluding priming coat ) on new wood and wood based surfaces with enamel paint to give an even shade including cleaning the surface of dirt, dust and other foreign matter, sand papering and stoping with enamel paint other than whiteas directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Painting two or more coat (excluding priming coat) on new steel and other metal surfaces under coat with ready mixed paint brushing to give an even shade including cleaning the surface all dirt, dust and other foreign matter with enamle paint other than whire white including all taxes, GST ,carriage of materials, within all leads and lifts and as per the direction of the Engineer-in-charge and other incidentals.

Finishing walls with Apex weather proof exterior grade emulsion of Asian paint or exterior emulsion of NAROLAC SURKSHA as per approved shade on undecorated wall surface (two or more coats) to give an even shade and final finish after thoroughly cleaning the surface to remove all dirt, dust and other foreign matter etc. including sand paper smooth complete as per specification as per the directions of the Engineer-in-charge including all taxes ,GST , carriage of material within all leads and lifts and other incidentals.

6mm (six millimetre) thick cement plaster to ceiling in cement mortar 1:3 ( one cement isto three sand) as per the directions of the Engineer-in-charge including all taxes, GST , carriage of material within all leads and lifts and other incidentals.

15mm (fifteen millimetre) thick cement plaster in single coat on fair side of brick / concrete / stone walls for interior plastering upto floor all levels including arises, internal rounded angles, chamfers and / or rounded angles not exceeding 80mm (eighty millimetre) in girth and finished even and smooth with cement mortar 1:3 (one cement isto three sand)as per the directions of the Engineer-in-charge including all taxes ,GST , carriage of material within all leads and lifts and other incidentals.

Distempering two coats with oil bound washable distemper of approved brand and manufacture and of required shade on un-decorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar dropping and other foreign matter and including preparing the surface even and sand papered smooth as per the directions of the Engineer-in-charge including all taxes ,GST , carriage of material within all leads and lifts and other incidentals.

Providing and fixing to wall, ceiling and floor galvanised mild steel tubes (medium grade) tube fittings and clamps including making good the wall, ceiling and floor 15 mm (fifteen millimetre) nominal bore as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and placing in position 1000 (one thousand) litres net capacity PVC water storage tank of ISI 12701 marked G.I. inlet and outlet connection, 15mm nominal bore ball valve and mosquito proof PVC cover with locking arrangment including hoisting upto all heights above ground level as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing high pressure PVC spigot and socket of Phenolex/Relimirel /Rected supreme make , waste and ventilating pipes ISI marked having 4 to 4.6 mm ( four to four point six millimetre) thickness including fixing with approved adhesive 150 mm (one hundred fifty millimetre) as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing high pressure PVC spigot and socket of supreme make , waste and ventilating pipes ISI marked having 4 to 4.6 mm ( four to four point six millimetre) thickness including fixing with approved adhesive 110 mm (one hundred ten millimetre) diaas directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing PVC 110x90mm (one hundred ten into ninety millimetre) dia floor trap ISI Marked of self cleaning design including fixing with approved adhsive, cost of cutting making the walls and floors etc. complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing PVC single equal branch plain ISI marked including fixing with approved adhesive 150 mm (one hundred fifty millimetre) dia as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing PVC single equal branch plain ISI marked including fixing with approved adhesive 110 mm (one hundred ten millimetre) dia as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and laying PVC plain bend of ISI marked including fixing with approved adhesive etc. complete 150 mm (one hundred fifty millimetre) dia as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and laying PVC plain bend of ISI marked including fixing with approved adhesive etc. complete 110 mm (one hundred ten millimetre) dia as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing PVC P or S trap for water closet (squatting pan ) ISI marked including jointing the trap with the pan and PVC pipe with approved adhesive etc. complete 150mm (one hundred fifty millimetre) dia as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing vitreous China water closet squatting pan (Indian type W.C. pan) ( earth work, bed concrete, foot rest and trap to be measured and paid for separately). Orrisa pattern No. 2090 of size 53x41 cm. of hindware / Cera Jaquuar or star whire/ snow white as per specification or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing PTMT coloured/ white high density polythene / poly prolylene 10 litre (ten litre) capacity low level P.V.C. cistern plus) flushing cistern with a pair of C.I. or M.S. brackets complete with fitting such as lead valve syphon, 15mm (fifteen millimetre) dia PVC wall valve , coupling for connection with inlet, outlet and overflow pipes 40mm (forty millimetre) dia C.P. flush bend including cutting holes and making good the same (overflow pipe to be measured and paid for separately) as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing vitreous China bowl pattern urinal including connecting the urinal with chopped hemp (waste pipe to be measured and paid for separately). Flat back type of size 430x260x350mm (four hundred thirty isto two hundred sixty isto three hundred fifty millimetre) as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing 15 mm (fifteen millimetre) nominal bore C.P. brass flush pipe / spreaders of contiental series of Jaquar/ contessa series of hindware / ocean series of cerafor urinal with fitting such as unions, clamps etcetra (all in C.P. Brass) including cutting holes and making good the same as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing vitreous China flat back size 550x400 mm (five hundred fifty into four hundred milimetre) Matrix wash basin with single for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fittings as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing C.P. brass waste of 32mm (thirty two millimetre) dia size for sink or wash basin as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing 600mm X 450 mm (six hundred millimetre into four hundred fifty millimetre) bevelled edge mirror of superior glass mounted on 6mm (six millimetre)thick A.C. sheet or plywood sheet and fixed to wooden plugs with C.P. brass screws and washers as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing vitreous China pedestal for wash basin complete recessed at the back for wash basin complete recessed at the back for the reception of pipes and fittings as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing 600mm X 20mm (six hundred millimetre into twenty millimetre) C.P. brass towel rail of continental series of Jaquar / contessa series of hindware/ ocean series of Cera complete with C.P. brass brackets fixed to wooden plugs with C.P. brass screws as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing charomium plated brass soap dish of continental series of Jaquar / contessa of hindware/ ocean series of Cera with C.P. brass brackets fixed to wooden cleats with C.P. brass screws as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing C.P. brass bib tap of continental series of Jaquar / contessa of series of hindware/ ocean series of Cera with 15 mm (fifteen millimetre) dia with capaston head as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing C.P. brass pillar tap with capstan head 15mm (fifteen millimetre) dia as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing C.P. brass angle valve 15mm (fifteen millimetre) dia as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing PVC connection with brass union 45cm. (forty five centimetre) Long and 15mm (fifteen millimetre) dia as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing brass full way valve with wheel 15mm (fifteen millimetre) nominal bore as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Kalim Mohd