Quantum of work involved in G/S to new connection of M/S Reserve Police Line c/o Pratisaar Nirikshak, Police Line, Near Distt. Jail, Civil Line, Unnao 11 KV feeder Police Line, emanating from 33/11 KV S/S Kabba Khera, Unnao under the area of EDD-I,

Amount

Safe Carriage of following materials from Elec. Store Center Unnao to work dump site along with loading unloading and propoer stocking distance as per indent.

400 KVA 11/0.4 KV T/F

11 KV VCB Panel

MS Channel for D.O. Fuse Set

Henley type tailless unit of 500 Amp.

Fixing of 11 KV D.O. Fuse Set at Double Pole with D.O. Fuse mounting Channel, clamps and nut & bolts including all associated work.

Supply & Fixing of following materials for above job-

11 KV D.O. Fuse Set

Clamp for mounting Channel with N&B

Construction of masonry type T/F plinth, suitable for mounting of distribution transformer. Size of the plinth will be 2 mtr x 2 mtr x 1.5 mtr (LxBxH) solid with brick work. 75 mm thick C.C. in ratio 1:4:8 with cement, coarse sand and brick ballast laid on the base and 75 mm thick done on all the exposed sides to the plinth as per RESPO norms. (All the material will be arranged by the contractor)

Placement of 11/0.4 KV T/F from dump site to newly constructed T/Fs Plinth & installation and commissioning of 400 KVA T/F and All the jumpering & connection with the system are included in the scope of work. (All the required materials for above job shall be provided by contractor except 400 KVA 11/0.4 KV T/F)

Supply & Fixing of following materials for above job-

Al. Lugs for 400 KVA T/F @ 04 nos. for each T/F

Copper L-piece @ 04 nos. for each T/F

Earthing of Neutral & Body of 400 KVA Transformer, 11 KV Pilfer Proof Metering Cubical, 11 KV VCB and 11 KV CT/PT Unit by way of boring and lowering of ‘B’ class G.I. Pipe 1.5” dia from ground up to the water level (Minimum 40 ft. Deep) with a solid cone at the lower end of G.I. pipe. Connecting and bringing out contineous G.I. Strip size 32X5 mm. from the cone to the ground surface where it will be connected with G.I. pipe clamp from which Transformer neutral & Body connection being done by G.I. Strip as per RESPO norm. (All the material will be arranged by the contractor)

Fixing of L.T. Tailless Fuse Unit with 01 nos. I/C and 03 nos. O/G Circuit arrangement by erection & fabrication of Distribution Pillar Box Pinth and LT Distribution Pillar Box including all associated work as per RESPO Norms. (All the required materials for above job shall be provided by contractor except Henley type tailless unit of 500 Amp.)

Supply & Fixing of following materials for above job-

Distribution Pillar Box Pinth

LT Distribution Pillar Box with Canopy type top along with front & back opening double door with locking arrangement made of MS Sheet

Copper bus bar of appropriate size @ 03 nos. for each LT Fuse Unit

Al. Bus bar of appropriate size @ 01 nos. for each LT Fuse Unit

Al. Lugs/Clamps of diff. sizes @ 16 nos. for each LT Fuse Unit

Painting of LT Pillar Box with 02 coat red oxide paint and 02 coat enemal red paint ISI Mark

Laying of LT PVC Cable of size 1x630 sq mm from Transformer to LT Fuse Unit system including all associated work. (All the material will be arranged by the contractor)

Supply & Fixing of following materials for above job-

LT PVC Cable of size 1x630 sq mm

Fabrication and erection of Distribution Transformer fencing around Transformer and L.T. Distribution Pillar Box with frame size 3x2.4 Mtr. Including cost of M.S. Angle size 40x40x5 and M.S. Flat size 35x5, fixing of welded steel wire fabric on steel frames by welding of 10SWG wire fabric, including Painting of two coats of paint in iron based surfaces with ready mixed paint to give bus green shade including cleaning of oil & dust as per RESPO norms. (All the material will be arranged by the contractor)

Installation & commissioning of 11 KV VCB at connection site as per RESPO Norms with complete all work as required.

Laying of 11 KV XLPE Cable of size 3X70 sq mm as per RESPO Norms with complete all work as required. (All the material will be arranged by the contractor)

Supply & Fixing of following materials for above job-

11 KV XLPE Cable of Size 3x70 sq mm

Fixing of 11 KV I/D Jointing Kit for XLPE Cable size 3x70 sq mm with complete all work as required. (All the material will be arranged by the contractor)

Supply & Fixing of following materials for above job-

I/D Cable Jointing Kit of size 3x70 sqmm

Fixing of 11 KV O/D Jointing Kit for XLPE Cable size 3x70 sq mm with complete all work as required. (All the material will be arranged by the contractor)

Supply & Fixing of following materials for above job-

O/D Cable Jointing Kit of size 3x70 sqmm

11 KV Cable Hosting including jumpering etc. complete work with help of G.I. Pipe as per RESPO Norms (All the material will be arranged by the contractor)

Supply & Fixing of following materials for above job-

G.I. Pipe 6'' dia.

Ludhiana Agencies Reg

M/s PRAMENDRA SINGH