Spl Rep to Bldg No T-38 JCOs Club Centre of Dinning cum Ante Room and Flooring at Certain Offrs Md Accn at Mil Stn Gaya

Amount

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quions, arches, pillars, etc, dressed stone work and precast concrete article

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness below or above GL

Dismantling of asbestos cement (corrugated or semi corrugated) sheets as in roof coverings complete all as specified and directed.

M & L for Brick work with subclass 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete.

M & L for Brick work with subclass 'B' bricks, (Except Bricks) straight or curved on plan exc 6m mean radius built in CM 1:6 complete.

M & L for brick work with sub class 'B' bricks, in half brick thick wall, straight or curved on plan exc 6m mean radius built in CM 1:4 complete.

S & F Prepainted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws as specified and directed.

S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour as in roof covering/Valley/Gutter/Ridges, fixed with self tapping screws complete.

Dismantling of mild steel structural steel framed trusses n.exc 10 m span of any weight and kept in safe custody for refixing the same.

Dismantling structural steel work as in purlins, rafters, or other simillar articles including cutting of rivets including doors, gates but excluding framed truss etc and kept in safe custody for rexifing the same.

S&F of Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing including distance pieces, cleats etc etc Fe 410 W (Gde E - 250 quality).

Erection only of existing Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing after removing the rust and as in position all as specified and directed.

Fabrication & Erection only of existing Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings including necessary cutting and welding of existing trusses/rafters/pulins after removing the rust and as in position all as specified and directed.

M & L for RCC M-25 Design Mix (using 20 mm graded aggregate) as in foundations, incl rafts, footings, foundation beams; plinth beams; bases for columns and mass concrete complete.

M & L for RCC M-25 Design Mix (using 20 mm graded aggregate) as in columns, pillars, piers, posts and struts complete.

M & L for RCC Design Mix M-25 (20mm graded aggregate) as in beams, cantilevers, bressummers, lintel etc.

M&L for Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete.

Ditto all aper item no 17 above but 6 to 8 mm dia, as in stirrups and spacers.

Use & waste formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams and plinth beams; and similar work; vertical or to batter complete.

Use & waste formwork to sides of pillars, posts, struts, piers, columns and stanchions

M & L formwork to rough finished flat surface of concrete to sides and soffits of floor or roof beams, beam haunchings, girders, lintels, cantilevers, shelves incl supports, overhangs, etc, also splays between floors and beam etc complete as all spfd and directed.

M & L for Mild steel screw bolts (machine made) with hexagonal heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal nut, exc 5cm but n exc 10cm long dia of neck is exc 11 mm but n.exc 15 mm complete.

M & L for Mild steel bolts purpose made with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut. exc 30cm long dia of neck is exc 11 mm but n.exc 20 mm complete.

M & L for applying two coat of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surfaces

M & L for applying a coat of synthetic enamel paint including preparation of old painted steel surfaces

Dismanteling ceiling and wall boards of any type or any thickness inclluding cover fillets compleate all as specified and directed

M & L for anodised aluminium snap grid frame work for false ceiling all as specified and as directed.

S & F of 4 mm thick HPSC (High Pressure steam cured) pre-primed textured designer board, water resistant, be placed in the grid system duly suspended with 2 mm dia GI bar hangers fixed with steel dash through fasteners from purlins of the roof complete all as specified.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc

Taking down chowkhat or frame n.exc 1.5 sqm (without taking off shutter) and removing to store/ taking in safe custody for refixing the same complete all as specified and directed.

Taking down chowkhat or frame exc 1.5 sqm but not exc 4.00 sqm (without taking off shutter) and removing to store/taking in safe custody for refixing the same complete all as specified and directed.

Refixing of chowkhat or frame n.exc 1.5 sqm (including shutter) complete all as specified and directed.

Refixing of chowkhat or frame exc 1.5 sqm but not exc 4.00 sqm (including shutter) and removing to store complete all as specified and directed.

Dismantling floor, hearth or wall tilling including cement mortar bedding , removing serviceable tiles to store and rubbish off the premises.

M & L for vitrified double charge tiles light shade 8-10 mm thick (square/ rectangular), area of each tiles not less than 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed in CM 1:4 complete.

M & L for coloured Glazed ceramic tiles in vertical surface 450x300x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10 mm thick screed in CM 1:4 complete.

M & L for 2 mm thick of Birla white putty/JK white wall care putty in two coats on new/old plastered surfaces and making the surface uniform & smooth on walls/ceilings.

M & L for preparation of old plastered surfaces and applying one coat of acrylic distemper on walls complete all as specified and as directed.

M & L for preparation of new plastered surfaces and applying two coat of acrylic distemper on walls complete all as specified and as directed.

M & L for 15- 18 mm Granite slab (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.

S & F Vitreuos china wash hand basin size 560x450mm oval shape incl brackets or fixed to walls with anchor fasteners all cutting for and pinning in end of brackets or erecting stand, and inclusive of fixing and supply and waste pipe and CP waste coupling 32 mm dia complete fixed. (Make-Parryware/Hindware/Jaquar)

Supply & fix in repair brass chromium plated pillar tap swan neck long body fancy type for wash hand basin for mixing hot and cold water screwed down for iron pipes suitable for 15mm bore pipe complete.

S & F of Vitreous China wash down water closet pan (pedestal pattern), white including fixing bolts, but excuding flushing cistern and flush pipe complete.

S & F of 10 litre PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets.

S & F as in repair of white soft closing seat cover for pedestal pattern water closet including fixing bolts complete. (Make : Jaguar/Hindware)

S&F brass chromium plated health faucet 15 mm with flexible tube (1.5 m long) of stainless steel provided rubber hose and wall hook etc complete as in repair all as specified. (Make : Jaguar/Hindware)

S & F of 6mm thick looking mirror of 1st quality glass, mounted on 6mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete.(Saint Gobain/ModiFloat)

S&F in repair 15 mm dia bore bib taps, brass chromium plated fancy type with crutch alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed.

S&F in repair 15 mm dia two way bib taps, brass fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions.

S&F in repair 15 mm dia stop/angle valves, cast copper alloy, CP fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe.

S & F in repairs CPVC pipes 25 mm outer dia SDR 11 & Plain CPVC SDR 11 includig all fittings on walls/ceiling or laying in floors including necessary cutting/chasing of walls and floors complete.

S & F of Male Brass Threaded Adaptor (MTA/ MBTA) or Feale Brass Threaded Adaptor (FTA/ FBTA) complete.

S & F of PVC connections 15mm size with PTMT nuts of length 600mm

S & F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors and connecting with manholes or disposal place.

S & F 110mm dia bore PVC (SWR) bends with access door all as specified and as directed.

S & F 110mm bore PVC (SWR) vent cowl with rubber ring joints, fixed to pipes all as specified.

S & F of PVC (SWR) junction single, (Single T) 110 mm bore equal or unequal with acess door complete.

M & L Plain cement concrete type D-2 (1:4:8) using 40mm graded stone aggregate as in surface channel & drains complete

S & F Powder coated aluminium frame/shutters for windows, ventilators sliding/openable etc icluding joining cleat for fixing, locking arrangement, rubber beading, screws, etc complete all as specified. Make : JINDAL/HINDALCO/INDALCO. Note : (i) Glazing and wire mesh shall be measured and paid separetely only as the labour element included in the relavent item. (ii) Item shall be paid as per weight of aluminium section (iii) The rate quoted shall be inclusive of the cost of neoprene beading, glazing pin, screws and powder coated fittings such as locking arraangement etc as required, which shall not be measured for arriving the weight (iv) The rate shall also be inclusive of complete packing with silicon gel around contacting surfaces of aluminium work, and including matching the existing.

M & L for 10 mm thick rendering in CM 1:6 on brick work or concrete surfaces of wall and finished surfaces fair and even without using extra cement complete.

M & L for 15 mm thick rendering in CM 1:4 over fair faces of brick work or concrete surfaces of wall and finished surfaces fair and even without using extra cement with WPC.

Supply Only water proofing compound (Sika latex power)

M & L for two coats of cement based paint over a coat of primer incl preparation of newly plastered wall surfaces.

S & F galvanised steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples.

S & F of 4.00 mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete.

M & L RCC M-25 Design Mix (using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns, and in shelves and the like complete.

M&L form work to sides and soffits of beam, lintels, shelves etc complete.

M&L for PCC 1:2:4, type B-0 using 12.50 mm graded stone aggregate as in coping, benching, bed block, lintel band, drains and channels etc and similar work incl form work.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc.

M & L for preparation of old plastered surfaces and applying one coat of acrylic distemper on walls over a coat of Birla white or JK wall putty complete all as specified and as directed.

Taking down shutters of any description exc 1 sq. m and n.exc 2.00 Sqm each and refixing in the same opening after repairing of the same.

Taking down carefully aluminium point wiring (light, fan, socket or power ) complete, including fittings and fixtures such as switches, ceiling roses, light fittings, regulators, sockets etc., removing materials to store, or keeping in safe custody for re-use at site or offering credit, and making good disturbed surfaces of walls, floors, etc., all as specified and as directed.

M&L for point wiring complete with PVC insulated unsheathed electric FRLS cable 1100V grade single core multistranded copper conductor cable conforming to IS : 694 of size 1.5 Sqmm two single core drawn through in and including PVC conduit pipe not less then 20mm dia medium grade ISI Marked complete conduit accessories in concealed wiring system with one run of PVC insulated copper conductor cable 1.5 Sq mm single core green colour earth wire and connecting to earth dolly incl colour coding of cable shall be for phase, neutral and earth wire as specified in MES SSR Part I 1991 with provn of sunken galvanised not less than 1.12 mm thick MS sheet pressed terminal boxes concealed on wall, with 3 mm thick laminated sheet top cover ISI marked. Make: Hylum/Anchor for fixing of switches/socket/regulator with screws complete including making good of disturbed surfaces of wall/ceiling/floor complete area in same specification as per existing all as specified and directed. Make of Wire : Havells/ Finolex/ Plaza

(a) One light/fan/bell point controlled by one switch.

(b) One 3 pin socket outlet 5 Amps independent board.

(c) One 3 pin socket outlet 5 Amps on the same board with other switch.

All as per item No.73.03 here-inbefore but 3/5 pin socket outlet point 15 Amps independent, with cables of size 2.5 sq mm multistranded, PVC insulated unseathed FR copper conductor cable, and 1.5 sq mm PVC insulated unseathed copper conductor cable as earth continuity conductor connected to common earth dolly all are in separate PVC conduit med grade not less than 20mm dia ISI marked ivory colour, incl. provn of sunken galvanised not less than 1.12 mm thick MS sheet pressed terminal boxes of suitable size & 3 mm thick laminated hylem sheet top cover of required size all as specified and directed by Engr-in-charge.

S & F in replacement of Modular switch piano type 10 Amps one way single pole 240 volts A.C complete all as specified and directed. (Make-Crabtree/legrand/Indo Asian (Glint))

S & F in replacement of Modular switch piano type 20 Amps complete all as specified and directed. (Make-Crabtree/legrand/Indo Asian (Glint))

S & F replacement of Modular socket outlet 10 Amps 5 pin 240 Volts multi socket for cell phone pin or 2 pin+ 3 pin complete all as specified and directed. (Make-Crabtree/legrand/Indo Asian (Glint))

S & F in replacement of modular socket outlet 20 Amps 6 pin 240 Volts twin socket heavy duty complete all as specified and directed. (Make-Crabtree/legrand/Indo Asian (Glint))

S & F for replacement of Modular ceiling fan regulator suitable electronic rotary step type 100 Watt 1 module complete all as specified and directed. (Make-Crabtree/legrand/Indo Asian (Glint))

M&L in replacement of modular white cover plate with frame 1/2 module. (Make-Crabtree/legrand/Indo Asian (Glint))

M&L in replacement of for modular white cover plate with frame 3 module (Make-Crabtree/legrand/Indo Asian (Glint))

M&L in replacement of modular white cover plate with frame 6 module (Make-Crabtree/legrand/Indo Asian (Glint))

M&L in replacement of modular white cover plate with frame 8 module (Make-Crabtree/legrand/Indo Asian (Glint))

M&L in replacement of modular metal flush box for 1/2 module .(Make-Crabtree/legrand/Indo Asian (Glint))

M&L in replacement of modular metal flush box for 3 module (Make-Crabtree/legrand/Indo Asian (Glint))

M&L in replacement of modular metal flush box for 6/8 module (Make-Crabtree/legrand/Indo Asian (Glint))

Supply and fix ceiling rose surface bakelite 65x50mm 2 to 3 terminal

Supply and fix MCB Distribution board double door made out of CRCA mild steel sheet surfce with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection surface/concealed mounting TPN 4 way, 440 volts with bus bar rating 200 Amps (vertical operation) and suitble size of cable gland -02 Nos, dust and vermin proof suitable for incorporation of MCCB 4 pole 63 amps 16 kA and MCB's and making all necessary connections complete all as specified and directed at site. Note : The cost of MCCB and MCB , isolators shall be measured and paid seperately.

Supply and fix sheet metal enclosure distribution board SPN, 8 ways 240 volts, with 200 amps rated bus bar, with IP 42 protection and double door, suitable for mounting MCBs all as specified and as directed including taking down old MCB DB complete..

Supply and fix MCCB 4 pole, 415 volts, 63 Amps, all as specified and as directed.

Supply and fix MCB single pole and neutral, 240 volts, 40 to 60 Amps, all as specified and as directed.

Supply and fix MCB single pole, 240 volts, up to 40 Amps, all as specified and as directed.

S & F building security light fitting 1 x 35/36 W LED new generation energy saving & environmental friendly long life LED street/bldg security light made up of pressure die cast aluminium housing with mid power LED as lighting source and PC cover having top opening including driver compartment driver with IP66 protection and impact resistance of IK07 including with suitable for 32mm dia medium grade G I bracket not exc 1.5 mtr length made to shape & fixing on pole/wall with 2 nos of MS clamp including necessary connection from LT OH line /buildings Make:- Havells/Crompton/Bajaj.

Supply and fixing post top lantern LED type 20 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete including connecting with 6.0 Sqmm twin core aluminium cable from junction box to fitting passed through pole for making necessary electric connections. Make: Havells/Bajaj/CG/Phillips

PVC Junction box of size 340mm x 285mmm x 120mm outdoor type, weather proof, factory made out of PVC sheet 1.8mm thick with front side hinged opening having locking arrangement with nuts & bolts & arrangement for incoming and outgoing cable/wire complete comprising of aluminium bus bar for 3 phases & neutral, insulated with insulators, including colour coding and 01 Nos MCB 06 Amps complete all as specified and directed. Make: Sintex Model : GSMB-3428/ National Model No: NJB3020 / Mahindra Composits

S&F for wall mounted LED tube light fitting 20 watts batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouput box type fitting, 230 volts and intregrated electronic driver connector block etc with installation complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. Make : Crompton Greaves Cat part No CCS-100-20-65-HL2-DP-NWH 20W or its equvalent in Philips, Havells.

M&L Earthing with galvanized steel earthing plate electrode 60 cm x 60 cm 6 mm buried directly in ground (earth pit not less than 2.25 mtr deep being ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level, connecting to a galvanised earth lead wire 4 mm dia by means of bolts, nut check nut and washers protected with and including 15 mm dia light grade GI pipe, necessary excavation and earth work, charcoal and common salt filling, watering arrangement with 20 mm GI pipe light grade including PCC pit with pre cast RCC (1:2:4) cover, GI funnel with test point, testing and commissioning all as specified and directed.

Sub main wiring complete with two runs of 6 sqmm single core PVC insulated unsheathed single core cable 1100 volts grade, multistranded with copper conductor drawn through and including 25 mm dia non metallic rigid PVC conduit and conduit accessories concealed in walls / roofs / floors etc., with one run of 4 Sqmm single core multistranded copper conductor as earth continuity conductor, all as specified inclduing dismantling unseriveable sub main wiring and accessories. Note:- One run of conduit two run of 6 sqmm copper condictor & one run of 4 sqmm copper conductor is measured as one unit.

Labour only for refixing the celing fan taking down from existing site with replacement of unsv 3 core PVC insulated PVC sheated 3 core multistranded copper conductor cable of size 23/ 0.193 from ceiling rose to fan terminal including over hauling the fan, painting of ceiling fans complete with two coats synthetic enamel paint by spraying including filling cavities with filler after cleaning all dust etc. complete all as specified and as directed.

S&F for exhaust fan heavy duty single phase 300 mm sweep, 1400 RPM, 240 Volts, AC with and including louvers, mounting rings, MS rag bolt, washers etc and connecting from ceiling rose / connector with and including suitable size flexible copper conductor PVC insulated sheathed chord and duly making holes complete all as specified and directed at site.

M&L in replacement of XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 6 sqmm 2 core.

M&L in replacement of XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area16 sqmm 4 core.

Excavation in trenches not exceeding 1.5 mtrs wide & not exceeding 1.5 mtr in depth in soft or loose soil & getting out complete all as specified and directed.

Returning filling including spreading levelling watering & well ramming in layers not exceeding 25 cm complete all as specified and directed.

Removal of excavated soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as directed.

M&L for laying of HDPE double wall corrugated pipes in trench for UG cable protection conforming to IS-14930 Part-II with IP-67 having outer dia 40 mm and inner dia of 32 mm including necessary fittings such as couplers, bends etc complete all as specified and directed.

S&F GI tubing 40 mm dia light grade with all fittings laid in trenches/road/along poles for cable protection complete as specified directed by Engr-in-Charge.

M/S SURYA BUILDERS

MS HARI MOHAN GUPTA