Construction of Pharmacy Block at Gurugam University, Sec-87,Gurugram.

Amount

Stage Ceiling Specification :- Providing and fixing of Magnesiste Bonded Pine Wood Fiber Black Colour Painted Square edge 15mm panel having fiber width both side is 0.5 - 1 mm with having density 400 kg/m3 for Ceiling of size 595x595x15 mm combination with 12.5 Gypsum board in lighting & AC Grill bands is to be installed on framework of T Frame. Which will comprise of NRC 0.95 base panel with humidity resistance of 90% RH and light reflectance upto 3-4 % with Leed points Green . Performance certified. Black Magnesite Bonded Pine Wood Panel 15 mm for Ceiling tile meet the stringent fire test required having Class ‘P’ rating for Ignitability test as per BS 476 part 5 and Class ‘1’ rating as per BS 476 part 7 for Surface Spread of Flame test. Class ‘P’ and Class ‘1’ are the highest rating. BS 476 part 6 Fire Propagation index and for Flaming ISO 1182 and Smoke density as per ASTM E 662 besides base panel with complete framework of T Frame as per Installation details given. USED IN AUDITORIUM STAGE (Make: Anutone , Earcons Acoustic, Hera Design )complete in all respect with the prior approval of enginerIncharge.

Installation Details:- Magnesite Bonded Pine Wood Fibre Black Coloured Square edge 15 mm for Ceiling Tile is to be layed on frame work of Skelet accessories pre-coated GI angle size 24x24x0.4 mm thick fixed to the brick wall / partition at the perimeter of ceiling with Nylon Sleeves and APS wafer head drywall screws, Then suspended main GI ‘T’ section (bottom precoated- Black ) with polyester coating of 25 microns dry film thickness. Main T-section size 24x38x0.3 mm thick and 3600 mm long from soffit in one direction with the help of metal rawl plug, cleat, leveler, perimeter & wall spring clip & G I Rod 4 mm diameter with galvanized spring steel level clip 1200 mm centres from soffit. G I cross T section (bottom precoated-Black) size 24x25x0.3 mm and 1200mm & 600mm long is insert fixed into the slots provided as interlock in main ‘T’ at 600 mm centres to form 600x600mm grid size for a tile size of 595x595 mm. The Polyester Wadding 50 mm having density 1000 gsm having flammibality - IS 15061-2002 Annexure clause A 3.2 overlaind on the framework with GI Cross Wires. All accessories such as T Frame accessories cleat, suspenders, levelers, clips etc, shall be supplied and installed in accordance with manufacturer recommendation.

Stage Wall Paneling Specification till Ceiling LVL :- Providing and Fixing approved colour of Fabric Cladded Magnesite Bonded Wood Fiber Panel of size 1200x600x25 mm, having fiber width both side is 0.5 - 1 mm with having density 400 kg/m3 with H-Profile. Which will comprise to NRC Upto 1 as per IS: 8225 / ISO: 354 / ASTM 423. Panel is to be installed on Knurling GI 48 mm (48X34X36X0.5X3050/3660) framework and meet the stringent fire test required having Class ‘P’ rating for Ignitability test as per BS 476 part 5 and Class ‘1’ rating as per BS 476 part 7 for Surface Spread of Flame test. Class ‘P’ and Class ‘1’ are the highest rating. BS 476 part 6 Fire Propagation index and for Flaming ISO 1182 and Smoke density as per ASTM E 662 besides base panel conform to EN 13168 2000 with complete Strut frame work as per Installation details given. USED IN AUDITORIUM STAGE WALL (Make: Anutone ,Earcons Acoustic, Heradesign) Complete in all respect with the prior approval of enginer. Incharge.

Installation:- The Fabric Cladded Magnesite Bonded Wood Fiber Panel is to be fixed on stud of Knurling G I section of prime quality cold rolled steel as per IS 513 hot dipped galvanized 120 gsm as per BS 2989 and zinc coating as per IS 277 of Knurling GI-48 mm (48X34X36X0.5X3050/3660) wall channel and Knurling GI 50 mm (50X32X32X0.5X3660) floor and ceiling channel are to be fixed with nylon plastic sleeves and wooden screws to from the proper framework . The extra channel must be used at openings and junctions as required. The cavity of framework should be inserted with Polyester Wadding backing/ infill 50 mm with density of 1000 gsm having . flammibality - IS 15061-2002 Annexure clause A 3.2 for better insulation. The insulation to be supported from the back by covering the frame with GI wire netting. The stud will come at every 600 centre to centre & PVC H- Profile to be fixed perpendicular to the GI-48 mm channels with steel screws for fixing Magnesite Bonded Wood Wool Panel . The panel in line & level. As per the specification and direction of the incharge

AUDITORIUM Hall Ceiling Specification :- Providing & Fixing 15 mm thk White Compressed Glass Fibre Panel Square edge combination of 12.5 mm painted gypsum board & light weight ceiling tiles having NRC upto 0.95 of size 595x595 mm in true horizontal level suspended on inter locking metal grid of hot dipped glvanised steel sections (galvanising @120 grams per sqm including both side) consisting of main 'T' runner suitably spaced at joints to get required lenght & of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm center to center, and cross "T" of size 24x38 mm made out of 0.33 mm (minimum ) sheet, 1200 mm long spaced between main "T" at 600 mm & size 24x38 mm made form a grid of 1200x600 mm and secondry cross "T" of lenght 600 mm and size 24x28 mm made of 0.33mm thick (minimum) sheet to be inter locked at middle of the 1200x600mm panel to from grid of size 600x600mm, resting on peripheriy walls/partitions on a perimeter wall angles precoated steel of size (24x24x3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 c/c with 25 mm long dry wall screws @230 mm interval and laying 15 mm thick Glass (Used in Auditorium ceiling) (Make: Anutone , Earcons Acoustic, Hera Design ) complete in all respect with the prior approval of enginer. Incharge.

Fibre Square edges ceiling tiles in the grid including, cutting/ making opening for services like diffuser ,grills, light fitting,fixtures,smoke detectors etc. wherever required Main T runners to be suspended from ceiling using G.I slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fastner, 4 mm G.I. adjustable rods with galvinised steel level clips of size 85x30x0.8 mm,spaced at 1200 mm center to center along main "T", bottom exposed with 24 mm of all T sections shall be pre painted with polyester backed paint for all heights as per specification drawing and directed by engineer-in-charge. (Make: Anutone ,Earcons Acoustic , Echophon) complete in all respect with the prior approval of EIC.

Wall Paneling Specification Upto DADO LVL:-Providing and fixing Wall Paneling with Grooved Slats Acoustical High Density Fiber Board Fire Resistance , Water Resistance & Termite Resistance Grade Panels 2400x128x16 mm with lineal perforations.The panels shall be one side Pre-laminated board (decorative lamination on one side and other sides balancing lamination ) grade -1 with 2 mm grooved at 16/32 mm pitch, Toungue and Groove edges for seamless mounting having density of 750-800kg/m3. The back of the panels are perforated with 10mm diameter circular holes with a nonwoven fabric covering of 0.2mm for providing Sound absorption .Panel is to be fixed on Aluminium section (weight approx.150gm/mtr) framework with screw fixed on comprising of a frame made from especially fabricated galvanised mild steel sheet 0.50 mm thick pressed section (galvanizing @120 grams per sqm ) i.e Veritcal studs of size 48 x 34 x 36 mm are placed at 600 mm center to center in a floor and ceiling channel section of size 50x32x32 fixed to the floor and sofit at 600 mm center fixed to the all perfarry of using 12mm dia,50mm long wedge type expanded zinc alloy dash fastner with 10mm bolt. The Polyester wool of 50 mm thickness having density 1000 gsm having flammibality - IS 15061-2002 Annexure clause A 3.2 is then to be inserted in the slots and Cross Channel will come at every 600 centre to centre with centre & edge bracket in tongue & groove system on Aluminium 18 mm frame. The installed system will have NRC not less than 0.84 as per IS: 8225 / ISO: 354 / ASTM 423. The panelling is to be fixed in different shade combination. The installed system as per manufacturer's specification as per direction of Engineer-in-Charge. Used in Auditorium wall panelling ( Make: Anutone , Earcons Acoustic, Top Akoustic) complete in all respect with the prior approval of EIC.

Skirting Specification :- Providing and Fixing HDCF curve edge Skirt of size 2440x100x8 mm thick one side for making skirting wall.Which will comprise of base panel with density & weight 1300 kg/m3 & 5.05 kg . HDCF curve edge Skirt is to be screwed on lower DADO Paneling on one side with approved colour should be painted. As per the specification and direction of the incharge. Used in Auditorium wall Skirting (Make: SHERA ,SCG, CONWOOD) Complete in all respect with the prior approval of enginer. Incharge.

Carpet Flooring:- Providing and fixing of Carpet with roll size of 4Mtr x 35 Mtr of 100% PP BCF pile fibre with Dyedand bulk construction filament yarn of gauge 1/10 and 50 stiches per cm. Carpet must have 6 mm (+/- 5) pile height , 850 gsm per SQM tuffed pile weight with primary backing of nonwoven polypropylene and action back secondary backing with 26 Newton of bond strenght & 18 Newton of tuffed withdrawl strenght and underlay of 8mm thick PU foam fixed to existing levelled floor with synthetic adhesives as approved by the manufacturer. Used in Auditorium Flooring (Make: Unitex , Earcons Acoustic, Miliken) Complete in all respect with the prior approval of enginer. Incharge.

Stage Flooring : Providing & fixing 75x18 thk in random length, 2nd class teak wood planks flooring with T&G joints on a layer of 19 mm thick ply of approved make and manufacture fixed to hard wood, 50x50 mm at 600 mm c/c in on other direction, the framework to be filled with The Polyester wool of 50 mm thickness having density 1000 gsm having flammibality - IS 15061-2002 Annexure clause A 3.2 .PU polishing of teakwood on exposed surface in horizontal/vertical plane (rate for flooring shall include providing additional framework required for housing microphone and power outlet junction boxes including providing & fixing hinged 18 mm thick teakwood cover for junction boxes.Used in Auditorium Stage flooring (Make: Anutone, Earcons Acoustic, Pergo) complete in all respect with the prior approval of EIC.

Acoustical Door Specification: P/F acoustical doors for the Auditorium. The door to be fabricated with 12 mm thick marine grade ply and finished with 3-4 mm thk veneer (finish with melamine polish of approved make shade and color and design both side. The door will have insulation with one layer of 50mm th. 48 kg. Cu. M density fiberglass/rockwool with 8 mm HDCF Panel having density 1250 kg/m3 . The fiberglass should be supported with wooden batten of Kail wood frame work minimum 610mm X 610mm to avoid sagging. The door leaf will be fabricated using 100mm x 74mm th. Teakwood frame. The fixed door frame (Chowkhat) shall be 2nd class Teakwood of size 125mm x 79mm, the door frame shall be provided on all four sides. (MAKE: ARCON CCOUSTIC,GLOBAL AND NAVAIR) complete in all respect with the prior approval of EIC.

The door will have hydraulic door closer, cross bar door handle and relevant hardware for fabrication and fixing. The door seal "D" type of rubber seal to block noise leakage from gap and acoustic door shutter Magnetic type of to be provided all around of the door frame as shown in the drawing the door to be attached with the door frame by brass metal hinges with adequate strength and numbers to avoid sagging. All joints to be sealed with Dow corning 790 or equivalent mastic sealant.

Panic bars to be provided on each leaf of the doors. (Paid Seprately)complete in all respect with the prior approval of EIC.

The doors on the auditorium side to be finished using non light reflective media like carpet of dull laminate/ veneer. Used in Auditorium door Finish of compact laminates should be suede finish which includes door, pilasters and intermediate panels finished with approved texture/shades as per IS2046 and fulfilled the criteria of fire retardant under BS-476/97 and EN:BS1D0 standard. This also includes providing and fixing in position necessary hardware made out of Gun Metal finish available in Rustic Brown & Champagne coloras per manufacturer’s specifications & Architects instructions like (1) Door Knob, (2) Gravity Hinges, (3) Thumb turn lockset with Occupancy indicators, (4) Coat hooks with Door stopper (5) U- Channels, (6) Adjustable foot/pedestal, (7) Aluminum Powder Coated Top Rail,(8) Rubber noise deafening tape, (9) Screws & wall Plugs. The top fitting should consist of Aluminium Powder Coated top rail which will get fixed with Mid & End pilasters. All screws will of 304 Grade in stainless steel with satin finish. All pilasters are supported by stainless steel Bottom Cladding. The base of the stainless steel bottom cladding will be anchored to the floor with a clearance height upto 150mm. 1995mm Height x 1000mm Width x 1550mm Depth, which includes 600mm door size width (Toilet) (Make: Global ,Earcons Acoustic, Navair ) Complete in all respect with the prior approval of enginer. Incharge.

Providing and fixing stainless steel 450 mm long Grab Bar with 2 nos CP brass wall flange including cutting & making good the walls wherever required complete in all respect as per direction of engineer - in - charge . Used in Handicapped toilets ( Roca, Kohler or Grohe ) Complete in all respect with the prior approval of enginer. Incharge.

Providing and fixing in position best indian make beveled edge 5.5 mm thick looking mirror with powder coated aluminium moulded frame mounted on asbestos sheet and required cushion ground fixed in position by means of 4 nos. chromium plated brass screws and washers over rubber washers and rawl plug embeded in the wall or chormium plated brass clamps with CP brass screws as required by the engineer in charge including cutting and making good the walls etc. as per drawing & design complete in all respects as directed by Engineer -in-charge. Used in common toilets (Modi guard, Saint gobin,Asi,Hindware) Complete in all respect with the prior approval of enginer. Incharge.

Providing and applying 50/80mm thick two component, HFC blown, free from CFC/HCFC polyurethane based spray able rigid foam system, closed-cell type, designed to meet insulation requirements in roof applications. PUF shall be applied seamless in-situ and is ideal for fast return to service. PUF should be applied through a suitable metered application machine, by specialist applicators and should be covered by waterproofing system. The thickness of the individual layers of PUF applied foam should be minimum 10 - 15 mm. PUF should have the following properties: 1. Viscosity at 20°C, cps: Part A ISO 300, Part B POLYOL 600 2. Compressive strength,ASTM D-1621/94,kPa> 400 3. Tensile strength,ASTM D1623/78, kPa:>500 4. Adhesion to substrate,ASTM D4541, kPa:> 180 .

5. Thermal conductivity at 25C as per ASTM C518/91, W/m K:≤ 0.023 6. Closed cell content,ISO4590, %:> 96 7. Water absorption,EN12087, %:< 2.5 8. Water Vapour Transmission,EN12086, perms132 9. Flash Points, ºC: Part A ISO > 200, Part B POLYOL > 65 10. Fire resistance,DIN4102: Class B2 11. Foam Density, kg/m3 ASTM D1622: 45 to 50 12. Specific c Gravity at 20°C: Part A ISO 1.23, Part B POLYOL 1.23 It shall be applied as per manufactures specification. Rates are incl of surface preparation, grouting and chemical application only. Used in auditorium Truss (Make: cactus,kings span Jindal, industial faom) complete in all respect with the prior approval of enginer. Incharge

Providing & fixing of flashing, Gutter, Down Take Pipe made out of 0.5mm TCT Galvanized steel sheet (perimeter of truss) Used in auditorium Truss (Make: cactus,kings span Jindal, industial faom) Complete in all respect with the prior approval of enginer. Incharge

Providing & fixing of Guttermade out of 0.5mm PPGI/PPGL Sheet Including ridge cap Used in auditorium Truss (Make: cactus,kings span Jindal, industial faom) Complete in all respect with the prior approval of enginer. Incharge Incharge.

Providing & fixing of down take pipe made out of PPGI/PPGL. Used in auditorium Truss (Make: cactus, kings span Jindal, Industrial foam) Complete in all respect with the prior approval of enginer. Incharge Incharge.

Providing and Fixing Sliding roller with necessary screws etc. complete as per direction of engineer in-charge (used in Aluminium windows) Make:(EPCO,Dorma, hafle) Complete in all respect with the prior approval of enginer. Incharge.

Providing and Fixing Sliding lock 1925(Manul) model no. -P-SWL-IM of Ebco make with necessary screws etc.(Used in aluminium windows) Make:Hindware,ozone,dorma) Complete in all respect with the prior approval of enginer. Incharge.

Extra for Proving V Groove & L groove in granite cladding including cutting of stone, Polishing to give high gloss finish complete in all respect with the engineer in charge.

Providing and Fixing Plaster of Paris false ceiling system complete with all hardware and accessories as per directions of Engineer in Charge.used in Reception and Lobby (Gyproc, Birla,Saint gobin) Complete in all respect with the prior approval of enginer. Incharge.

Providing & fixing Alimunium angle (Size 40x40) Powder coated at edges of Tiled walls or similar locations of required size fixing with screw complete as per direction of engineer in charge Used in Aluminium Window Jali and tile corner. (jindal,tata,rail) complete in all respect with the prior approval of enginer. Incharge.

Extra for openable side / top hung vision panels (IGUs) including providing and supplying at site all accessories and hardware’s for the openable with poly carbonate sheet complete in all respect with the prior approval of enginer. Incharge.

Providing & fixing frosted film on glass in various designe and patern as per directions of Engineer-incharge (3M, saint gobin or equivalent) complete in all respect with the prior approval of enginer. Incharge.

P/F of American handle 250 mm complete in all respect. (ozone hafle,dorma) complete in all respect with the prior approval of enginer. Incharge.

12mm thk. P/F Wooden Flooring with skirting complete in all respect as per satisfaction of EIC. Used in Conference Room (Green, Century, earcon) complete in all respect with the prior approval of enginer. Incharge.

P/F Blinds For the VIP Floors Used in Window (make :Bista,hunterduglas,Earcons) with the prior approval of enginer. incharge

P/F Mortrise lock For the VIP Floors (axion,Godrej,Hawk ) complete in all respectwith the prior approval of enginer. Incharge.

P/F Quartz marble 19-20mm thk. AGL sheet on all counter top at important placese(Used in Vip Toilets) complete in all respect with the prior approval of enginer. Incharg

P/F GRC jali (façade/Outer shaft and Entrance column) complete in all respect with the prior approval of enginer. Incharge (make : unistone or Equilant )

Providing & Fixing Door Stopper Door Mounted Hanging Type (Stainless Steel ) Make Goodrej, Ozone, Dorset Complete in all respect with prior approval of EIC.

Providing & Fixing 240mm Door Handle set with lock body 1CK (Stainless Steel )Complete in all respect with prior approval of EIC.Make Goodrej, Ozone, Dorset

Providing & Fixing Vibe Handle SS 300 mm Make Goodrej, Ozone, Dorset Complete in all respect with prior approval of EIC.

Providing & Fixing Hings SS 150 x 76 x 2.5 mm (6x12) Make Goodrej, Ozone, Dorset Complete in all respect with prior approval of EIC.

Providing & Fixing Tower bolt SS 10 x 300 mm (12) Make Goodrej, Ozone, Dorset Complete in all respect with prior approval of EIC.

Providing & Fixing New Door Closer C-071 (Stainless Steel ) Make Goodrej, Ozone, Dorset Complete in all respect with prior approval of EIC.

Providing & Fixing ALDROP 16*200mm stainless steal (Make:- Godrej,Ozone,Doorset ) complete in all respect with prior approval of EIC.

Providing & Fixing of aluminium acoustical glass partition System Single glazed modular system consisting of Aluminium section of 25*100*1.5 mm thick. All sections duly anodised up to 20 microns with 6063-T6 grade and required accessories i.e glass to glass aluminium I sections, T section & 90 degree sections & Glass packing to adjust the floor level. Ceiling and vertical profiles to be fixed and bottom profile should have clip on profiles to make provision for inserting the glass. All profiles should make a 25 mm visible face and 100 mm wide with 10mm toughened glass & insertion of silicon /Thermo plastic gasket to adhere the glass firm & airtight.Sound Reduction from 32 to 35 db. complete in all respect with prior approval of EIC. DSR 19.98

Providing and fixing over counter wash basin with C.I. holding brackets, 15 mm CP brass Pillar Cock Self Closing System, 32 mm C.P. brass waste of standard pattern, including of approved quality and make, including fittings and brackets, cutting and making good the walls wherever required:- (Wash Basin - Make-HIndware, Model-Wave over counter basin, Catalogue No.-91042) (Pressmatic Tap - Make Hindware, Catalogue No.-F310001ACP)White Vitreous China Over counter Wash basin size 590x400x140 mm. & Pressmatic Tap (used in HOD room and VIP area)(Hindware,cera,perriware) complete in all respect with prior approval of EIC

Providing and fixing under counter wash basin with C.I. holding brackets, 15 mm CP brass Pillar Cock Self Closing System, 32 mm C.P. brass waste of standard pattern, including of approved quality and make, including fittings and brackets, cutting and making good the walls wherever required:- (Wash Basin - Make-HIndware, Model-Optra under counter basin, Catalogue No.-91008) (Pressmatic Tap - Make Hindware,Cera,Perriware) (used in Common Toilet) White Vitreous China Under counter Wash basin size 570x480x210 mm & Pressmatic Tap Complete in all respect With the prior approval of enginer incharge

Providing and fixing of Health Faucet of approved quality with 1.5m long plastic NBR braided pipe (SS braiding) flexible pipe, wall hooked complete as required. (Make-HIndware, Model-Iconic Health Faucet, Catalogue No.-F160068) (Hindware,cera,perriware) (used in toilets other than Handicapped)Complete in all respect With the prior approval of enginer incharge

Providing and fixing of 1 No. U-shaped rail with wall mounting of (Size: 600x100mm) at fixed height for handicap toilet complete as required. (Make-CERA, Model-2501) (Hindware, Cera, Parryware) (Used in Handicapped toilet) complete in all respect With the prior approval of enginer Incharge

Providing and fixing of 1 No. Wall Mounted Grab Bar of (Size: 500mm) at fixed height for handicap toilet complete as required. (Make-CERA, Model-2504) (Hindware, Cera, Parryware) (Used in Handicapped toilet) Complete in all respect With the prior approval of enginer Incharge

Providing and fixing of 1 No. Wall Mounted Grab Bar of (Size: 350mm) at fixed height for handicap toilet complete as required. (Make-CERA, Model-2505) (Hindware, Cera, Parryware) (Used in Handicapped toilet) complete in all respect With the prior approval of enginer Incharge

Providing and fixing SS 304 chilly square cockroach trap grating of approved make. (Chilly Cockroach trap, Model-CCT-S-129-Gloss) (Camry, Chilly, SBD) (Used in all traps) complete in all respect With the prior approval of enginer Incharge

Providing and fixing liquid soap container 235 mm wide, 116 mm high and 114 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. (Make - Kimberlay Clark, Model Aquarius-69480) (Hindware, Cera, Parryware) (Used at wash basin counter)complete in all respect With the prior approval of enginer incharge.

Providing and fixing Waste Coupling Waste Coupling 32 mm (Full Thread) for wash basin and sink , of approved quality and colour. (Make-Hindware, Cataloge No.-F850002 (Hindware, Cera, Parryware) (Used for Sink / Basin / Urinal) complete in all respect With the prior approval of enginer Incharge

Providing and Fixing automatic 'NO-Touch ' electric hand-driers complete with all accessories & fittings. (Make: Jaquar Model No. HDR-SAP-M99ACS) (Jaquar, Euronics & Kingston) (Used in Toilets) With the prior approval of enginer incharge)

Providing and fixing Centralized R.O system with chillar plant of the capacity - 1100 litres / hr and storage of 15000 litres complete including fixing in position. (TERRACE) (MAKE:Aquagard,ionchange or equivalent ISI Mark) (Used at Terrace) With the prior approval of enginer Incharge

Providing and fixing uPVC pipes 6 Kg/Cm2 (IS: 4985 ) including all fittings (plain or door) e.g. bends, junction, offsets, access pieces, jointing with rubber ring/solvent cement joints including required suports,cutting chase or holes in walls and floors and making good where required.(waste & soil pipes, ASP pipe inside the building) (Make: Prakash,Supreme,prince,Finolex) With the prior approval of enginer Incharge

Providing & fixing in position uPVC Multi trap of self cleaning design of following sizes for the embedded areas. Making proper connection with drip-seal joints, cutting chase / hole in floors /slabs and bringing the same in proper condition in cement concrete 1:2:4 mix complete as required. including cost of cutting and making good the walls and floors where required. (Make: Prakash,Supreme,prince,Finolex) (Used in Toilets / Pantry / Laboratory) complete in all respect With the prior approval of enginer Incharge

Providing and laying cement concrete 1:2:4 mix (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm and down gauge) 75 mm in bed and all round SCI / CILA / UPVC / GI pipes With the prior approval of enginer Incharge

150/100/75/50/40/32 mm dia soil & waste pipes under floor including shuttering and centering complete in all respect With the prior approval of enginer Incharge.

Providing and fixing cast brass cleanout plug( Ceiling or Floor) with suitable inset keys for opening, male threaded joint with G.I. socket fixed to uPVC/SCI pipe complete in all respects. (Make: Prakash, Supreme, prince, Finolex) (Used in Toilets & Basement Ceiling) With the prior approval of enginer Incharge

100 mm nominal pipe size

Providing and fixing uPVC floor drain consisting of PVC reducing elbow 110 x 63mm (Grating and pvc pipe to be paid separately), complete as directed by the Project Manager. (Make: Prakash,Supreme,prince,Finolex) (Used in Toilets) complete in all respect With the prior approval of enginer Incharge.

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : Make: Prakash,Prince, Finolex) With the prior approval of enginer Incharge.

32mm nominal bore

40mm nominal bore

50mm nominal bore

Providing and fixing in position of approved quality G.M. float valve with copper ball float and brass rods of required length following sizes: (Make - Leader & GM or equivalent) (Used at Terrace) (Water tank) With the prior approval of enginer Incharge

40 mm dia

Internal Water Supply:- Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. DSR: 18.7

40 mm nominal outer dia Pipes DSR: 18.7.5

50 mm nominal outer dia Pipes DSR: 18.7.6

FIRE FIGHTING WORKS: Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges ,tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall /ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : (Make-Tata / Jindal (Hissar) / SAIL) (Location - All Floor Internal Ceiling / Fire Shaft) With the prior approval of Engineer Incharge.

25 mm dia.

32 mm dia.

40 mm dia.

50 mm dia.

65 mm dia.

80 mm dia.

100mm dia

150mm dia

Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : (Make - Sant / Advance / Zoloto) (Location - External Main Line Connection / Terrace / Fire Shaft) With the prior approval of Engineer Incharge

100 mm dia.

150 mm dia.

Providing and fixing dial type pressure gauge with isolation cock and copper pipe at hydrant station. (Make - H-Guru / Feibig) (Location - Terrace / Fire Shaft) With the prior approval of Engineer Incharge. 16.8 (HVAC)

Dial diameter 100 mm calibration 0-15 kg/ sq.cm.

Providing laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required. (Make-Tata / Jindal (Hissar) / SAIL) (Location - External Burried) With the prior approval of Engineer Incharge Derived from DSR-2019

150 mm. Dia

100mm Dia.

SUB HEAD-B (FIRE HYDRANT ACCESSORIES) Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required : (Make - Superex / Safex / Eversafe / Minimax) (Location - Terrace / Fire Shaft) With the prior approval of Engineer Incharge

Single headed Gunmetal

Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 20 mm nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipmets on wall. Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket. (Make - Superex / Safex / Eversafe / Minimax) (Location - Fire Shaft) With the prior approval of Engineer Incharge

Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required : (Make - Superex / Safex / Eversafe / Minimax) (Location - Terrace / Fire Shaft) With the prior approval of Engineer Incharge

Gun Metal

Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required : (Make - Superex / Safex / Eversafe / Minimax) (Location - Terrace / Fire Shaft) With the prior approval of engg. Incharge

Gun Metal

Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required. (Make - Standard) (Location - Fire Shaft) With the prior approval of Engineer Incharge

Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required : (Make - Superex / Safex / Eversafe / Minimax) (Location - External) With the prior approval of Engineer Incharge

2 way-100 mm dia M.S. Pipe

Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required. (Make - Indfos / Danfoss / System sensor) (Location - Terrace) With the prior approval of Engineer Incharge

Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories : (Make - HD / Newage / Viking) (Location - All Floor Internal Ceiling) With the prior approval of Engineer Incharge

Pendent Sprinkler

Upright Sprinkler

Horizontal side wall sprinkler

Providing, installation, testing & commissioning of adjustable rosette plate for 15mm dia in white finish UL Listed or FM approved complete as required. (Make - HD / Newage / Viking) (Location - All Floor Internal Ceiling) With the prior approval of Engineer Incharge

Supplying, installation, testing & commissioning of sprinkler flexible pipe (UL Listed) of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar of following sizes complete as required. (Make - HD / Newage) (Location - All Floor Internal Ceiling) With the prior approval of Engineer Incharge

SUB HEAD-D (FIRE PUMPS & ACCESSORIES) Supplying, installation, testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, complete in all (Make - Kirloskar / Crompton Greaves /Wilo (Mather & Platt) (Location - Terrace) With the prior approval of Engineer Incharge

respects, as required: (Terrace Pump)

(a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical confirming to IS : 1520

b) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class-'F' insulation, conforming to IS-325.

(c) M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required.

(d) Suitable cement concrete foundation duly plastered and with anti vibration pads.

900 lpm at 35 m Head

Providing & fixing flow switch in following sizes M.S. pipe including connection etc as required. (Make - System Sensor or equivalent) (Location - Terrace) With the prior approval of Engineer Incharge

150mm dia

Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and paintingwith synthetic enamel paint of approved shade as required. (Make - Standard) (Location - Terrace) With prior approval of Engineer Incharge

Supplying and fixing Single headed external yard hydrant valve with 1 No. 63 mm dia instantaneous FM Gunmetal/Stainless Steel coupling and cast iron wheel, ISI marked, conforming to IS 5290 (type A) with blank Gunmetal/Stainless Steel cap and chain as required : (Make - Superex / Safex / Eversafe / Minimax) (Location - External) With the prior approval of Engineer Incharge

Single headed Stainless steel

Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange. (Make - Sant, Advance, Zoloto) (Location - Terrace) With the prior approval of Engineer Incharge

150mm dia

Providing and fixing door with frame for all internal fire hydrants fabricated from 20x20x3 mm and 40x20x3 mm aluminium hollow box sections mounted with 3 no. of 100 mm Aluminium butt hinge on Aluminium angle frame of 45x45x5 mm size with hold fasts fixed to wall with P.C.C. (1:2:4) blocks 100x100x100 mm including 2 nos allen key lock for locking along with padlock arrangement & fully glazed with 4 mm thick float glass approved by local Fire Authority, powder coated fire red finish with " fire hose' written on front suitable to house 15 mm long two length of canvas hose with couplings, one no of branch pipe, one fire mans axe and two numbers of portable extinguishers, first aid fire hose and supports for hoses, branch pipes, Axe and hose reel. Size 2100 x 900 mm complete as per approved design including necessary fixing arrangement for hoses & axe and branch pipe.) (Make - Standard) (Location - Fire Shaft) With the prior approval of Engineer Incharge

Supplying and fixing of Fire Man's Axe with heavy insulated rubber tested upto 20 KV and confirming to IS :926. (Make - Superex / Minimax / Safex) With the prior approval of Engineer Incharge (Location - Fire Shaft)

Providing and fixing 25 mm dia inspecting & testing assembly with gunmetal valve, gunmetal sight glass, bypass valve & connected to drain line. (Make - Standard) (Location - Fire Shaft) With the prior approval of Engineer Incharge

SUB HEAD-C (FIRE EXTINGUISHERS & MISC. ITEMS) Providing and fixing Carbon-di-oxide fire extinguishers consisting of welded M.S cylindrical body, squeeze lever discharge valve fitted with internal discharge tube, 30cms long high pressure discharge hose, discharge nozzle, suspension bracket, confirming to IS : 15683 finished externally with red enamel paint and fixed to wall with brackets with rawl plug/dash fasteners complete with internal charge. Capacity 4.5 kg. ISI Marked.( Contractor should submit test certificate form manufacturer along with serial number of every extinguishers supplied.) (Make - Superex /Minimax / Safex) (Location - Terrace / Fire Shaft) With the prior approval of engg. Engineer Incharge

Providing and fixing water Co2(ISI marked) extinguishers including all accessories as per IS specification with wall bracket with rawl plug (Make - Superex /Minimax / Safex) (Location - Terrace / Fire Shaft) With the prior approval of Engineer Incharge

Capacity 9 liters.(IS:15683)

Providing and fixing Carbon-di-oxide fire extinguishers consisting of welded M.S cylindrical body, squeeze lever discharge valve fitted with internal discharge tube, 30cms long high pressure discharge hose, discharge nozzle, trolly mounted, confirming to IS : 15683 finished externally with red enamel paint and fixed to wall with brackets with rawl plug/dash fasteners complete with internal charge. Capacity 22.5 kg. ISI Marked.( Contractor should submit test certificate form manufacturer along with serial number of every extinguishers supplied.) (Make - Superex /Minimax / Safex) (Location - Terrace / Fire Shaft) With the prior approval of Engineer Incharge

Providing and fixing ABC powder type fire extinguishers complete with all accessories as per manufacturers specifications. (Contractor should submit test certificate form manufacturer along with serial number of every extinguishers supplied.) (Make - Superex /Minimax / Safex) (Location - Internal Rooms) With the prior approval of Engineer Incharge

Providing and fixing liquid level controller for fire pump to stop fire pump in case of low level of water in tank , cost of conduit, cable and panel including making connection to pump panel and commissioning complete. (Make - Minilec / Ital / Technika) (Location - Terrace) With the prior approval of Engineer Incharge

Providing and fixing rubber expansion joint (to provide relief from stresses at pipe flanges) as per specification of the manufacturers and direction of Engineer in chief PN-16 rating (Make - Kanwal / Dunlop or equivalent) (Location - Terrace) With the prior approval of Engineer Incharge

150 mm dia

Providing and fixing single acting air valve with screwed inlet 25 mm dia. (Make - OR / VB / Anergy) (Location - Terrace) With the prior approval of Engineer Incharge

Providing and fixing fire hose cabinet fabricated from 16 gauge M.S. Sheet with single or double glazed front door and locking arrangement, painted "Fire Red" with powder coated paint "Fire Hose" written on front including suitable supports to place 900 mm above ground level, approximately size 750x600x250 mm deep (to house two lengths of canvas hose with couplings, branch pipe and nozzle for external hydrants) (Make - Superex / Minimax / Safex) (Location - External & Terrace) With the prior approval of Engineer Incharge

Providing & Fixing 350mm wide CI grating with frame 25mm thick of the approved design with the prior approval of the engg. Incharge. (Make - Standard) With the prior approval of Engineer Incharge (Location - Basement)

Drainage Sump Pump Providing and fixing compact monoblock dry motor submersible pumps of suitable rating, with non-clog free flow open impeller, solid handling capacity of upto at least 28mm suitable for operation on 415 volts +10% , 3 Phase, 50Hz, A.C supply, speed 2900 RPM including oil chamber, guide wire for lifting & lowering of pump, M.S. galvanized lifting chain, complete. The pump sets shall be supplied with required accessories & as per specification with the following : (Make - Crompton, Kiloskar or equivalent) (Location - Basement) With the prior approval of the Engineer Incharge

(a) Complete piping 65 mm dia common delivery upto 7.5 m in heavy Duty Class 'C' G.I. -- 1 Set

(b) 65mm dia Butterfly valve.-- 2 Nos

(c) 65 mm dia Flap type Non-return valve.-- 2 Nos

(d) Necessary cables from pump set to control panel (position of panel marked on enclosed drawings).- 1 Set

(e) Electrical control panel having all necessary accessories & safety devices of standard specifications and suitable for receiving incommer cable from main plumbing panel to conncet sump pump panel complete as required. (Panels with sump pumps near each sump as per site conditions). --1 No.

Each set consist of 2 nos.of pumps - 1 working & 1 stand by (Complete set as above with 2 nos. pumps including cost for valves, piping, Control Panel and Cabling, Level Controllers etc as required and as specified) 2.The entire system alongwith pumps & control panel must be sourced from single manufacturer only for unit responsibility.

Discharge - 180 LPM Each

Total head - 10-15 Meters (minimum)

FIRE FIGHTING Item: Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. (Make-Tata / Jindal (Hissar) / SAIL) With the prior approval of Engineer Incharge (Location - Basement / Fire Shaft) 80 mm dia nominal bore

Electrical Work Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required. (Supreme,finolex falcol) with the prior approval of engg. incharge

200 mm dia (OD-200 mm & ID-175 mm nominal)

PANEL BOARDS (MAIN PANEL- PHARMACY) Fabrication, supply, installation, testing and commissioning of free standing cubicle panel board of 2mm thick MS sheet steel, powder coated in approved shade, IP42 ingress protected, suitable for operation on 3 phase, 415 V, AC supply system, with cable chambers, aluminium busbar chambers, copper earth bus accross the full width of the panel, cable entry arrangement using detachable hot dipped galvanised gland plates, interconnections with suitable size aluminium strips/ bars, earthing, labelling etc including supply and fixing the following switch gears and accessories inside the panel complete as required. (Make: L&T ,Havells, Standard, Adlec, Tricolite & Advance) with the prior approval of engg. incharge

A. INCOMING

a) 1600A, 4 pole electrically operated ACB, horizontal drawout type air circuit breakers of fault breaking capacity 50 KA with motorised and manual spring charging mechanisms, interlocking arrangement with panel door, automatic safety shutters, mechanical ON/ OFF and service/ test/ isolated position indicators and frame earthing contact, microprocessor release for overcurrent, short circuit and earth fault, shunt release & closing release for remote operation and confirming to IS-13947- 2 1993 as amended up-to-date. - 1 No

b) Digital LCD display type multi function meter (having the parameters: V, A, F, PF, W/VA, Wh/VAh, THD, Maximum Demand) with RS485 port, set of CTs - 1 set.

c) 3 Nos. Phase indication LED lamps, breaker ‘ON’ indicating light, test terminal block set, 2A SP MCB for control circuit protection, control wiring etc as required

B. OUTGOINGS

a) 6Nos. 400A, 4 pole, 25 kA (Icu=Ics) MCCB with thermal magnetic release and Rotary operating handle, spreader links etc. complete as required

b) 5Nos. 200A, 4 pole, 25 kA (Icu=Ics) MCCB with thermal magnetic release and Rotary operating handle, spreader links etc. With the prior approval of Engineer Incharge.

(UPS PANEL- OUT GOING PANEL) Fabrication, supply, installation, testing and commissioning of free standing cubicle panel board of 2mm thick MS sheet steel, powder coated in approved shade, IP42 ingress protected, suitable for operation on 3 phase, 415 V, AC supply system, with cable chambers, aluminium busbar chambers, copper earth bus accross the full width of the panel, cable entry arrangement using detachable hot dipped galvanised gland plates, interconnections with suitable size aluminium strips/ bars, earthing, labelling etc including supply and fixing the following switch gears and accessories inside the panel complete as required. (Adlec, Tricolite & Advance) With the prior approval of Engineer Incharge

A. INCOMING

a) 200A, 4 pole electrically operated ACB, horizontal drawout type air circuit breakers of fault breaking capacity 50 KA with motorised and manual spring charging mechanisms, interlocking arrangement with panel door, automatic safety shutters, mechanical ON/ OFF and service/ test/ isolated position indicators and frame earthing contact, microprocessor release for overcurrent, short circuit and earth fault, shunt release & closing release for remote operation and confirming to IS-13947- 2 1993 as amended up-to-date. - 1 No

b) Digital LCD display type multi function meter (having the parameters: V, A, F, PF, W/VA, Wh/VAh, THD, Maximum Demand) with RS485 port, set of CTs - 1 set.

c) 3 Nos. Phase indication LED lamps, breaker ‘ON’ indicating light, test terminal block set, 10A HRC fuses for control circuit protection, control wiring etc as required

B. OUTGOINGS

a) 63A, 4 pole MCB - 8Nos.

Supplying, installing on wall, testing and commissioning of following capacity Air Insulated Compact Type Rising Mains for use on 3 phase 4 wire 415 volts, 50Hz A.C. supply with enclosure having IP-54 rating after fixing the tap off boxes and all accessories, made of 1.6mm thick steel sheet duly powder coated in convenient sections complete with 4 Nos aluminium bus bars having current density of 130 A/ sq cm at nominal current rating, necessary joints & expansion joints, fire barrier at each floor, provision of tapping at every metre, continuous earthing with 2 Nos aluminium strip of suitable size (one on each side) including, G.I. clamping brackets, angle iron bracket, steel fasteners, connecting to earthing system etc. as required.with the prior approval of engg. incharge (C&S, Havells, L&t or Equivalent) D.S.R. 3.8

200 A Isc = 15kA for 1 second DSR: 3.8.1

500 A Isc = 35kA for 1 second DSR: 3.8.4

Supplying, installation, testing & commisioning of following capacity End Feed Unit for the existing Air Insulated Compact Type bus trunking/ rising mains for use on 3 phase 4 wire 415 volts, 50Hz A.C. supply made with 1.6mm thick steel sheet enclosure (IP54) duly powder coated with provision of MCCB/ACB (but without MCCB/ACB) complete with necessary joints including clamping brackets, angle iron bracket, steel fasteners, connecting to earthing system etc. as required. with the prior approval of engg. incharge (C&S, Havells, L&T or Equivalent)

200 A 15kA SC for 1 sec DSR: 3.11.1

500 A 35kA SC for 1 sec DSR: 3.11.4

Supplying, installation, testing & commisioning of following capacity Plug In/ tap off box on the existing Air Insulated Compact Type bus trunking/ rising mains for use on 3 phase 4 wire 415 volts, 50Hz A.C. supply made with 1.6mm thick sheet steel enclosure (IP54) duly powder coated with provision of MCCB/ACB (but without MCCB/ACB) complete etc. as required. with the prior approval of engg. incharge (C&S, Havells, L&t or Equivalent)

200 A 25kA SC for 1 sec DSR: 3.12.2

500 A 50kA SC for 1 sec DSR: 3.12.5

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. (DSR-2018, 1.14.11) 4 X 16 sq. mm + 2 X 6 sq. mm earth wire (Grandlay,Havells,Finolex) with the prior approval of engg. incharge. DSR-2018 Item-1.14.11

Supplying,installation,testing and commissioning of Microwave technology based occupancy sensor having high preformance, non regulating programmable type, suitable for connected load upto 10Amp , for mounting height up to 2.6 mtr and for 5m X 20m coverage area along with necessary fixing arrangements i/c programming at site etc. complete as required. (L&T,Philips & Honeywell or equivalent) with the prior approval of engg. incharge. DSR-2018 Item-15.3

Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required. (DSR-2018, 1.57) (Legrand,Anchor,East West) with the prior approval of engg. incharge

Supplying, installation, testing & commissioning of intelligent analog addressable photothermal detector complete with mounting base complete as required. DSR: 17.2.4

Supplying, installation, testing & commissioning of response indicator on surface/recessed MS Box having two LED, metallic cover complete with all connections etc as required. DSR: 17.2.5

Supplying, installation, testing & commissioning of intelligent addressable thermal detector with rate of rise cum fixed tempreature thermistor complete with base as required. DSR: 17.2.9

Supplying, installation, testing & commissioning of addressable beam detector with short circuit isolator (inbuilt or seperate) complete with emitter and receiver including connections with remote test features etc complete as required. DSR: 17.2.12

Supplying, installation, testing & commissioning of addressable fire control module complete as required. DSR: 17.2.10

Supplying, installation, testing & commissioning of addressable manual call point complete as required. DSR: 17.2.14

Supplying, installation, testing & commissioning of addressable horn cum strobe complete as required. DSR: 17.2.15

Supplying & laying of 2x1.5 sqmm fire survival armoured cable, 600/1000V rated with annealed copper conductor having glass mica fire barrier tape covered by an extruded layer of Cross Linkable Ethylene Propylene Rubber (EPR) insulation and LSZH inner bedding, steel wire armouring & LSZH outer sheath complete as required. DSR: 17.2.19

SUB-HEAD -V: PUBLIC ADDRESS SYSTEM (Bosch, Notifire (Honeywell) & Edward) Supplying, installation, testing & commissioning of 6 zone, voice alarm controller with USB, MP3 player (including 6 zonebutton paging station) with seamless integration facility with main fire alarm panel for voice evacuation complete as required. (Philips,Sony or equivalent) with the prior approval of engg. incharge DSR: 17.3.1 (2018)

Supplying, installation, testing & commissioning of 1.5/3/6W ceiling speaker complete as required. DSR: 17.3.2 (2018)

Supplying, installation, testing & commissioning of digital audio amplifier 75 Watt, 25V rms operating at 240 Volt AC Supply complete as required. DSR: 17.3.7 (2018)

Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the existing surface / recessed steel conduit of following pairs, cores and size including connections and interconnections etc. as required. DSR: 17.5.3 (2018)

speaker cable Single pair, 2-core, 1.5 sqmm DSR: 17.5.3.1 (2018)

SUB-HEAD : EARTHING AND LIGHTENING ARRESTOR Supplying and fixing following ways surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board (3phase*4 outgoing) of sheet steel, dust protected, duly powder painted, inclusive of 250 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB’s, with provision of 160 amps TP 16 KA MCCB as incomer, interconnection between incomer MCCB and bus bars (but without MCB’s/ MCCB) as required . (L&T,Havells,C&S or equivalent) with the prior approval of engg. incharge

Supplying, fixing, testing & commissioning of 20 pair telephone tag block ( krone,Delton or equivalent) complete as required.with the prior approval of engg. Incharge

Supplying, fixing, testing & commissioning of 100 pair telephone tag block ( Delton,krone make) complete as required.with the prior approval of engg. Incharge

Supplying, laying, testing & commissioning of 20 Pair of PVC insulated PVC sheathed multi core jelly filled armored telephone cable.(Delton,polycab or equivalent) with the prior approval of engg. Incharge

Supplying, laying, testing & commissioning of 100 Pair of PVC insulated PVC sheathed multi core jelly filled armored telephone cable.(Havells,Grandlay,Polycab) with the prior approval of engg. Incharge

Supplying, laying and testing of following size, XLPE insulated and PVC sheathed armoured aluminium conductor power cable of 1.1 kV grade conforming to IS 7098 (Part 1) 1988 as required. (Grand lay,Havells,Polycab) with the prior approval of engg. incharge

3½ X 185 sq. mm

3½ X 300 sq. mm

SUB-HEAD -III : FAN & LIGHT FIXTURES Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 32 A modular socket outlet and 32 A modular SP MCB, "C" curve including connections, painting etc. as required.(L&T, Crabtree,Legrand & Honeywell ) with the prior approval of engg. incharge

Supply of LED Recessed grid - ceiling luminaire of 36W size 2'x2' energy efficient white colour, made of high grade poly carbonate body working hour minimum 50000 hours, operation on single phase AC supply complete in all respect upto the entire satisfaction of Engineer- in -charge of the work including making necessary connections etc. (Make: Philips, Model no. RC 380B LED36s-6500 G5 L60 W60 PSU OD (FULL GLOW). (Philips,Havells,Wipro) with the prior approval of engg. incharge

Supply of Recessed mounting LED round Down Light fitting of 15W energy efficient white colour, made of high grade poly carbonate body working hour minimum 50000 hours, operation on single phase AC supply complete in all respect upto the entire satisfaction of Engineer- in -charge of the work including making necessary connections etc. (Make: Philips, Model no. DN296B LED15S-6500 PSU WH, GREEN PERFORM SLEEK) . (Philips,Havells,Wipro) with the prior approval of engg. incharge

Supply of Recessed mounting LED round Down Light fitting of 10W energy efficient white colour, made of high grade poly carbonate body working hour minimum 50000 hours, operation on single phase AC supply complete in all respect upto the entire satisfaction of Engineer- in -charge of the work including making necessary connections etc. (Make: Philips, Model no. DN295B LED10S-6500 PSU WH, GREEN PERFORM SLEEK). (Philips,Havells,Wipro) with the prior approval of engg. incharge

Supply of 10W LED Linear Light Fitting 600 mm (L) energy efficient white colour, made of high grade poly carbonate body working hour minimum 50000 hours, operation on single phase AC supply complete in all respect upto the entire satisfaction of Engineer- in -charge of the work including making necessary connections etc. (Make: Havells, Model no.BS10W LED 865SPCSS, LUMILINE PLUS ) (Philips,Havells,Wipro,) with the prior approval of engg. incharge

Supply of 40W LED Linear Light Fitting 1200 mm (L) energy efficient white colour, made of Extruded Aluminium batten body working hour minimum 50000 hours, operation on single phase AC supply complete in all respect upto the entire satisfaction of Engineer- in -charge of the work including making necessary connections etc. (Make: Philips, Model no. BN 021 LED40S- 6500 PSU GR) (Philips,Havells,Wipro) with the prior approval of engg. incharge

Supply of 100W surface mounted highbay LED fixture, IP66 & IK08 protected with PDC housing, toughened & shattered proof glass including Wide beam optics, single phase AC supply complete in all respect upto the entire satisfaction of Engineer- in -charge of the work including making necessary connections etc. (Make: Philips, Model no. BY325P LED100S CW PSU GR FG WB XTFCL V1, DuraLED Highbay). (Philips,Havells,Wipro,) with the prior approval of engg. incharge

Supply of surface mounting LED round Down Light fitting of 16W energy efficient white colour, made of high grade poly carbonate body working hour minimum 50000 hours, operation on single phase AC supply complete in all respect upto the entire satisfaction of Engineer- in -charge of the work including making necessary connections etc. (Make: Philips, Model no. SM251C LED 16S 6500 PSU WH (Sleek Surface Down light).

Supply of Outdoor application IP65, 15W LED ground burial, energy efficient Light fitting, Aluminium die-cast body, powder coated, complete in all respect upto the entire satisfaction of Engineer- in -charge of the work including making necessary connections etc. (Make-Decon, Model no. L20ABS-15) (Philips,C&S,Jacquar) with the prior approval of engg. incharge

Supply of Outdoor application IP65, 15W LED with U-clamp, down light fixture including Aluminium die-cast body, powder coated, complete in all respect upto the entire satisfaction of Engineer- in -charge of the work including making necessary connections etc. (Make-Decon, Model no. L09ABS - 15) (Philips,Havells,Wipro) with the prior approval of engg. incharge

Supply of 7W LED Step light fixture, Outdoor application IP66, pressure die-cast, aluminium housing, integrated driver, single phase AC supply complete in all respect upto the entire satisfaction of Engineer- in -charge of the work including making necessary connections etc. (Make: HavellS Model no. RADIANT NEO FT 07W LED830S ASY MBOPC) (Philips,Havells,Wipro) with the prior approval of engg. incharge

Supply of 3W LED spike light for planter Outdoor application IP65, Aluminium die-cast, integrated driver, single phase AC supply complete in all respect upto the entire satisfaction of Engineer- in -charge of the work including making necessary connections etc. (Make: Decon, Model no. L09 ACE-3) (Philips,Havells,Wipro) with the prior approval of engg. incharge

Supply of 6W LED bulkhead Light fitting, made of Pressure Die cast housing with IP66 Protection and IK09 impact resistance suitable for surface and wall mounting applications. Suitable for single phase AC supply complete in all respect upto the entire satisfaction of Engineer- in -charge of the work including making necessary connections etc. (Make: Philips, Model no. WT202W LED6S CW PSU S2 PC). (Philips,Havells,Wipro) with the prior approval of engg. incharge

SUB-HEAD - IV : FIRE ALARM SYSEM Supply, installation, testing and commissioning of addressable monitor module complete as per specification.

SUB HEAD - VI : IP CCTV Survilliance System SITC of 1080P Day & Night Vari-Focal IR Vandal Resistant IP Dome Camera, 2.0 MP 1/2.86" CMOS image sensor, 3D noise reduction, 2D WDR function, Defog function, Digital PTZ supported, Tampering detection / audio detection / motion detection alarm function, High efficiency IR LED,radiant distance up to 30m, Day & Night (IR cut removable), 2-way audio supported, Digital I/O: 1 in, 1 out, ONVIF Profile S supported, Support Micro SD/SDHC/SDXC card, CE and FCC Cerificate, IP67, IK10, power supply: DC12V and PoE (IEEE 802.3af compliant) etc. all complete (bosch,merit linin,sony) ) with the prior approval of engg. incharge

SITC of 1080P Day & Night Vari-Focal IR IP Bullet Camera, 2 MP MOS image sensor, 60 FPS @ 1080P True H.264 AVC High Profile video compression, H.264 and Motion JPEG multi-profile video streaming, 3D noise reduction (MCTF), 2D WDR function, Defog function, HDR function up to 120dB, Digital PTZ supported, Face / Tampering / Audio / Motion detection alarm, Cable managed housing and bracket, High efficiency IR LED, radiant distance up to 45m, Day & Night (IR cut removable), 2-way audio supported, Digital I/O : 1 in, 1 out, ONVIF Profile S supported Support Micro SD/SDHC/SDXC card, CE and FCC Cerificate, IP67, IK10, power supply: DC12V and PoE (IEEE 802.3af compliant) etc. all complete(bosch,merit linin,sony) with the prior approval of engg. incharge

SITC of 32 CH 4K Standalone Network Video Recorder, 32 Channel H.264/H.265 network camera Input, Up to 4K H.264/H.265 network camera support, Up to 1080P 120 FPS network camera support, Internal HDD up to 12TB supported, 19”2U Rack mount, External e-SATA storage supported, HDMI 2.0 ( 4K 60P ) / VGA 1080P output HDMI / VGA main or spot monitor switch, Mobile phone ( iOS, Android ) solutions provided, Network maximum input through up to 300Mbps, Chrome, Edge, Firefox, IE, Opera, Safari supported, Ethernet failure redundancy or sharing supported, Alarm notification iOS、android / E-Mail / FTP / buzzer / DO / OLED display, ARP / TCP/IP / UDP / HTTP / HTTPS / SMTP / SNMP / FTP / DDNS / PPPoE / NTP / RTP / RTSP / DHCP/ ONVIF Profile S support etc. all complete (bosch,merit linin,sony) with the prior approval of engg. incharge

SITC of MS Windows 2008 Server R2 x64, Intel i5 Xeon Quad Core processor, 8 GB RAM, 1TB HDD, 2GB Graphics Card. With CD/DVD player, Mouse and Keyboard etc all completeV (bosch,merit linin,sony) with the prior approval of engg. Incharge

SITC of 55" Display Panel, 4K UHD (3840 x 2160p) Resolution, Direct-lit LED, Brightness: 500 nits, Contrast ratio: 1200:1, Display Colors: min 10bit, Input: 2 HDMI, DisplayPort, VGA, Audio In, Output- Audio output, Built-in OPS Slot, HDR10 Support, HDMI-CEC, 2 x 8W speakers etc all complete with the prior approval of engg. incharge with the prior approval of engg. incharge (bosch,merit linin,sony) With the prior approval of Engineer Incharge.

SITC of 16-port GbE Smart Managed PoE Switch with GbE Uplink, 16 100/1000 Mbps, 2 Gigabit combo (RJ-45/SFP), Total PoE budget (watt) 250W as per given specification etc all complete with the prior approval of engg. incharge (bosch,merit linin,sony) With the prior approval of Engineer Incharge.

SITC of 24-port GbE Smart Managed PoE Switch with GbE Uplink, 24 100/1000 Mbps, 2 Gigabit combo (RJ-45/SFP), Total PoE budget (watt) 375W as per given specification etc all complete with the prior approval of engg. incharge (bosch,merit linin,sony) With the prior approval of Engineer Incharge.

Supply, installation, testing and commissioning of online 3-phase UPS system with 30-minutes back up including batteries, interconnecting cables, battery racks etc. complete as required. (as per CPWD plinth area rate 2021 - @20000/- per KVA) with the prior approval of engg. incharge (Emerson,APC Schneider & Numeric-Legrand) With the prior approval of Engineer Incharge.

SUB HEAD - VII : IT DATA, VOICE AND WiFi SYSTEM SITC of LSZH Cat 6A-10G speed unshielded twisted pair computer cable with 23 AWG solid copper conductors in existing concealed/surface conduits/Raceways complete 305 Mtr. Roll as per specification etc. all complete (3c3,Coming,Panduit) with the prior approval of engg. incharge

SITC of Single port faceplate with Gang Box etc. all complete (3c3,Coming,Panduit) with the prior approval of engg. Incharge

SITC of Dual port faceplate with Gang Box etc. all complete (3c3,Coming,Panduit) with the prior approval of engg. Incharge

SITC of UTP Cat-6A Information Outlet for Data and Voice as per specification etc. all complete (3c3,Coming,Panduit) with the prior approval of engg. Incharge

SITC of Cat-6A Mounting Cords 7 Feet for Data and Voice as per given Specification etc. all complete. (3c3,Coming,Panduit) with the prior approval of engg. Incharge

SITC of Cat-6A Mounting Cords 4 Feet for Data and Voice Jack Panel end as per given Specification etc. all complete. (3c3,Coming,Panduit) with the prior approval of engg. Incharge

SITC of Cat-6A, 24 Port Jack Panel for data and Voice for as per given Specification etc. all complete. (3c3,Coming,Panduit) with the prior approval of engg. Incharge

SITC of Cat-6A, 48 Port Jack Panel for data and Voice for as per given Specification etc. all complete. (3c3,Coming,Panduit) with the prior approval of engg. Incharge

SITC of Cable Manager for above jack panels as per given Specification etc. all complete. (3c3,Coming,Panduit) with the prior approval of engg. Incharge

SITC of 12 Core Multi Mode Fiber (Armored) Cable as per given Specification etc. all complete. (3c3,Coming,Panduit) with the prior approval of engg. Incharge

SITC of 12 Port Fiber LIU Loaded with SC MM Coupler, as per given Specification etc. all complete. (3c3,Coming,Panduit) with the prior approval of engg. Incharge

SITC of 24 Port Fiber LIU Loaded with SC SM Coupler, as per given Specification etc. all complete. with the prior approval of engg. Incharge

SITC of SC MM Pigtail (1.0 Mtr) as per given Specification etc. all complete. (3c3,Coming,Panduit) with the prior approval of engg. Incharge

SITC of SC-LC MM Fiber Patch Cords ( 3 Mtr) as per given Specification etc. all complete. (3c3,Coming,Panduit) with the prior approval of engg. Incharge

SITC of 9U (W 600mm/ D 600mm) wall mount with front glass door and side panels with lock & key (load bearing capacity of 40Kgs), AC main Channel 06 points 5 Amp (PDU) with Mounting Hardware (Pack of 10) ect all complete (3c3,Coming,Panduit) with the prior approval of engg. incharge

SITC of 15U (W 600mm/ D 600mm) wall mount with front glass door and side panels with lock & key (load bearing capacity of 40Kgs), AC main Channel 06 points 5 Amp (PDU) with Mounting Hardware (Pack of 10) ect all complete (3c3,Coming,Panduit) with the prior approval of engg. incharge

SITC if DK PS Frame,1000Wx2000Hx1200D (2nos. of 1000Wx2000Hx600D with Baying tube), Top cover with rear fixed & slideable gland plate with foam insert for cable entry, bottom cover with standard gland plates with foam insert for cable entry and rear 4nos. of 50mm dia rubber grommets as per std., 2 pairs of 42U 19" L - type angles & special assembly kit for mounting 19" angles & punched sections, Complete with 11 KVA Power and 7KW Cooling in complete. It consist of in built Temperature, Humidity, Automatic door opening & leakage Monitoring System. with Signal Pillar Fire Extinguisher System etc all complete (3c3,Coming,Panduit) with the prior approval of engg. incharge

SITC of 100 Pair MDF Box with Mounting Frame etc all complete with the prior approval of engg. Incharge

SITC of 25 Pair Riser cable etc all comlete (FINOLEX OR EQUIVALENT with the prior approval of engg. Incharge)

SITC of 28-port GbE L3 Aggregation Fiber Switch with 4 SFP+ Uplink, 24 Gigabit SFP, Loaded with required Fibre module as per given specification etc all complete (3c3,Coming,Panduit) with the prior approval of engg. Incharge

SITC of 24-port GbE L2+ PoE Switch with GbE Uplink, 24 100/1000 Mbps, 4 Gigabit Combo (RJ-45/SFP), Loaded with required Fibre modul as per given specification etc all complete (3c3,Coming,Panduit) with the prior approval of engg. Incharge

SITC of 48-port GbE L2+ Switch with GbE Uplink, 24 100/1000 Mbps, 2 Gigabit Combo (RJ-45/SFP), Loaded with required Fibre modul as per given specification etc all complete (3c3,Coming,Panduit) with the prior approval of engg. Incharge

SITC of Unified Security Gateway, 8x GbE(configurable) Interface, USB ports, Console port, Rack-mountable, WLAN Manegement Loaded with required Fibre modul as per given specification etc all complete (3c3,Coming,Panduit) with the prior approval of engg. incharge

SITC of Tri-Band WiFi System, IEEE 802.11 b/g/n 2.4 GHz - 256QAM support, Daisy Chain, MU-MIMO as per given specification etc all complete (3c3,Coming,Panduit) with the prior approval of engg. Incharge

SITC of 100% Non Blocking Fully Digital Integrated Services Digital Network (ISDN) Compatible Voice Over Internet Telephone(VoIP) ready 19" Rack mountable EPABX presently equiped with 02 ISDN PRI Trunk Lines (60 Channel), 10 IP Extension, 16 Digital Extension, 72 Analogue Extension, Expandable up to 200 Ports / Channels and other as per the given Specification etc. all complete (bosch,merit linin,sony) with the prior approval of engg. incharge

SITC of IP User Linceses for 10 Users etc all complete with the prior approval of engg. Incharge

SITC of 16 Port Digital Card etc all complete with the prior approval of engg. Incharge

SITC of 24 Port Analouge Card etc all complete with the prior approval of engg. Incharge

SITC of High End Digital Key Phone 6x24 Display with 24 Programmable Dual Color LED’s with 4 Feature Access Keys, multi-step Tilt angle adjustment, Navigator Key, backlit display, should have option to connect Blue Tooth etc. all complete. ( Make: bosch,merit linin,sony) with the prior approval of engg. incharge

SITC of Low end DIgital Key Phone 1x16 Display with 8 Programmable Dual Color LED’s etc. all complete. (3c3,Coming,Panduit) with the prior approval of engg. Incharge

SITC of IP Phone 1x16 Display with 8 Programmable Dual Color LED’s etc. all complete.(Make: bosch,merit linin,sony) with the prior approval of engg. Incharge

SITC of Analog Phone With Speaker , Small Display etc. all complete (Make: bosch,merit linin,sony) with the prior approval of engg. Incharge

SUB HEAD - VIII : AUDIO AND VISUAL WITH STAGE LIGHT AND FURNISHING SOLUTION FOR AUDITORIUM SITC of 98" Professional Grade Display Panel, Native resolution: 4K UHD 3840 x 2160 (16:9), Direct-lit LED, Brightness (typical) 500 nits, Contrast ratio 1200:1, Viewing angle 178 degrees h/v, Response time 8ms, 10 bit, 1.07 billion Display colors, Video inputs 4 x HDMI (Ver 2.0), DisplayPort , OPS, RS-232, LAN (RJ45) control input, HDR10 support, 2 x 10W built-in speakers etc all complete (christle,nec,barco or equivlant) with the prior approval of engg. incharge

SITC of 55" Professional Grade Display Panel, Native resolution: 4K UHD 3840 x 2160 (16:9), Direct-lit LED, Brightness (typical) 500 nits, Contrast ratio 1200:1, Viewing angle 178 degrees h/v, Response time 8ms, 10 bit, 1.07 billion Display colors, Video inputs 4 x HDMI (Ver 2.0), DisplayPort , OPS, RS-232, LAN (RJ45) control input, HDR10 support, 2 x 10W built-in speakers etc all complete (Make: christle,nec,barco or equivlant) with the prior approval of engg. incharge

SITC of Wall Moount Kit for above displays with all required accessories etc all complete (Make: christle,nec,barco or equivlant) with the prior approval of engg. Incharge

SITC of 1DLP Laser Projector, 6000 ANSI lumens or more, Contrast ratio 3000000:1 or more, WUXGA (1920 x 1200) Resolution, Illumination type High-efficiency blue laser phosphor, Standard inputs HDMI (1.4a), HDMI 2.0, HDBaseT, 3D Sync In (BNC), VGA, Audio In (3.5mm phone jack), USB-A, Signal outputs: 3D SYNC Out (BNC), HDMI, Audio Out, motorized lens - powered zoom, focus and offset etc all complete (Make: christle,nec,barco or equivlant) with the prior approval of engg. incharge

SITC of Ceiling mount kit, Suitable for projectors up to 15kg etc all complete (Make: christle,nec,barco or equivlant) with the prior approval of engg. Incharge

SITC of 137"(16:10) Tubular Motorized screen with LVC, & comes with I.R Remote & Matte White Fiberglass Fabric, with mounting accessories etc all complete (Make: christle,nec,barco or equivlant) with the prior approval of engg. Incharge

SITC of 165"(16:10) Tubular Motorized screen with LVC, & comes with I.R Remote & Matte White Fiberglass Fabric, with mounting accessories etc all complete (Make: christle,nec,barco or equivlant) with the prior approval of engg. Incharge

SITC of Cable Cubby, 2 Universal Power, 2 USB Charger, HDMI 2.0v, pass though cable space with all required accessories etc all complete (Make: christle,nec,barco or equivlant) with the prior approval of engg. Incharge

SITC of Full HD USB PTZ Camera, 1/2.8 inch image sensor, USB 3.0 interface with HDMI video output, 12x optical zoom, Horizontal Viewing Angle 72° or more, Vertical Viewing Angle 43° or more, Auto, manual Gain Control and Focus System, 128 Preset Positions with mounting accessories etc all complete (Make: christle,nec,barco or equivlant) with the prior approval of engg. incharge

SITC of Intel Celeron Mini-PC, Windows 10 IOT License, One time Up to 4 users wireless screen shares & Quad-view Support/ Preinstalled suite of Video conferencing apps / 720p Camera Support / Single Display Support/ Online dashboard support with wireless keyboard and mouse etc all complete (Make: christle,nec,barco or equivlant) with the prior approval of engg. incharge

SITC of 4 Channel Streaming Encoder/ Recorder, Independent encoder settings for simultaneous streaming and recording, Streaming to YouTube, Facebook and other live streaming platform, External audio inputs, Supports live video streaming and IP video switching, also Quad View, Full Screen, PIP, PBP, POP mode for monitoring, Built-in de-interlacer and video downscaler, H.264/AVC High Profile Level 4.1, RTSP over HTTP / TCP / UDP (RTSP Elementary Streaming), RTMP/RTMPS (Publish) etc all complete (Make: christle,nec,barco or equivlant) with the prior approval of engg. incharge

SITC of HDMI to USB 3.0 Capture Box, Support Windows: Amcap, Google Plus Hangouts, OBS (Open Broadcast Software), Skype, VLC, Xsplit Broadcaster, Zoom.us etc all complete (Make: christle,nec,barco or equivlant) with the prior approval of engg. Incharge

SITC of Smart Lectern / Podium, Integrates PC, microphone, touch screen into a singular device, Wireless Screen-sharing, Up to 8 devices for instant switch, Electrically Adjustable Height, 21.5 Inches IPS Touch screen FHD (1920x1080) Resolution, 10 Points Capacitive Touch Points, Stylus or Finger, Integrated PC with Windows 10, Intel 8th i5, 8GB RAM, SSD 128GB, Display Connectors: HDMI out, Audio out, 2 USB Ports, 2 Gosseneck Microphone with Microphone Pickup Distance ≤20cm, Mobile on wheels etc all complete (Make: christle,nec,barco or equivlant)

SITC of HDMI 2.0 Compatible Full 4K Matrix Switcher, 8 HDMI input, 4 HDMI Output, 2 Audio outputs, HDCP 2.2 and HDCP 1.4 compliant with cross conversion capabilities, Supports HDMI 4K signal formats (4K UHD @60Hz RGB 4:4:4, up to 18 Gbps), HDMI 2.0, HDMI 1.4 and DVI 1.0 compliant, HDR and Low Latency Dolby Vision support, Audio de-embedding, supports uncompromised 4K UHD resolution at 60Hz 4:4:4 etc all complete (Make: christle,nec,barco or equivlant) with the prior approval of engg. incharge

SITC of Universal Switcher with HDMI and USB-C connectivity, 2 HDMI Inputs, 2 USB-C connectivity (4K Video, Audio, Data, Power charge), 2 HDMI Outputs, 4 USB-A 3.0 Connection (for USB Devices), 2 USB-B 3.0 Connection (for PC hosts), USB host switching, Analog audio de-embedding, Charging via USB-C up to 60w, Supports HDMI 4K signal formats (4K UHD @60Hz RGB 4:4:4, up to 18 Gbps), DP Alt Mode, HDMI 2.0, HDMI 1.x, DVI Signal Support, HDCP 1.x, HDCP 2.2 support etc all complete (Make: christle,nec,barco or equivlant) with the prior approval of engg. incharge

SITC of HDMI Transmitter, HDMI inputs, Extends DVI/HDMI 1.4, Audio, Ethernet, RS-232, up to 120 Meter over one CAT5/6/7 cable, HDMI 1.4, HDCP 1.4 and DVI 1.0 compliant, HDBaseT compatible, Pixel Accurate Reclocking, Supports HDMI 3D signal formats, Bi-directional RS-232 and IR extension (pass-through and control), Supports HDMI 4K signal formats (4K UHD @30Hz RGB 4:4:4 or @60Hz YUV 4:2:0, up to 9 Gbps) etc all complete (Make: christle,nec,barco or equivlant) with the prior approval of engg. incharge

SITC of HDMI Reciever, HDMI output, Extends DVI/HDMI 1.4, Audio, Ethernet, RS-232, up to 120 Meter over one CAT5/6/7 cable, HDMI 1.4, HDCP 1.4 and DVI 1.0 compliant, HDBaseT compatible, Pixel Accurate Reclocking, Supports HDMI 3D signal formats, Bi-directional RS-232 and IR extension (pass-through and control), Supports HDMI 4K signal formats (4K UHD @30Hz RGB 4:4:4 or @60Hz YUV 4:2:0, up to 9 Gbps) etc all complete (Make: christle,nec,barco or equivlant) with the prior approval of engg. incharge

SITC of Digita Conference System: Controller with Recording & Web Server, built-in Digital Signal Processing, Control upto minimum 50 Discussion Unit and expandable upto 150 Discussion Unit by configuring multiple Controller Unit, 4 Bus Connection. 4 Branches. OR 2 Closed Loop for redundancy mechanism, Camera Control Integration Capability, Conference Mode: Direct access, Request, Push to talk, FIFO, Vox control, Digital Acoustic , Feedback Reduction, With Audio Input & Output for connectivity with external sysytem like amplifier, microphone & audio/video conference system, Audio Quality 16Bit digital, CE Certified and should not be be manufactured (Country of Origin) in China. Preferebly Europe/North Amercica. etc all complete (Make: christle,nec,barco or equivlant) with the prior approval of engg. incharge

SITC of Digita Conference System: Chairman Discussion Unit with Gooseneck Microphone of minimum Length 400mm, built-in Digital Signal Processing, Unit with Priority and Next-in-Line Configuration, Priority button silences all delegate microphones and allows only the chairperson to speak, User Button with Feedback, Shielded microphone, immune to mobile phone interference , High-quality integrated loudspeaker, Headphone output with Volume Adjustment, Loop-through, daisy-chain cabling, Different LED Signalling for Mic On/Off OR Request-to-Speak Push Button, Audio Quality 16Bit digital, Frequency Response: 30Hz-15kHz, Microphone with 400-500mm Gooseneck Length with Polar Pattern: Unidirectional, Cardioid, Max SPL @ 1kHz: 110dB SPL, S/N Ratio: 67dB-A, Connection: Screw Lock CE Certified and should not be be manufactured (Country of Origin) in China. Preferebly Europe/North Amercica. etc all complete (Make: christle,nec,barco or equivlant) With the prior approval of Engineer Incharge.

SITC of Digita Conference System: Delegate Discussion Unit with Gooseneck Microphone of minimum Length 400mm, built-in Digital Signal Processing, Unit with Microphone On / Off Button with Feedback, Shielded microphone, immune to mobile phone interference , High-quality integrated loudspeaker, Headphone output with Volume Adjustment, Loop-through, daisy-chain cabling, Different LED Signalling for Mic On/Off OR Request-to-Speak Push Button, Audio Quality 16Bit digital, Frequency Response: 30Hz-15kHz, Microphone with 400-500mm Gooseneck Length with Polar Pattern: Unidirectional, Cardioid, Max SPL @ 1kHz: 110dB SPL, S/N Ratio: 67dB-A, Connection: Screw Lock CE Certified and should not be be manufactured (Country of Origin) in China. Preferebly Europe/North Amercica. etc all complete (Make: christle,nec,barco or equivlant) with the prior approval of engg. incharge

SITC of Digita Conference System: Cat 5e / Cat6 Cable and connectors for above digital coneference system setup etc all compete (Make: christle,nec,barco or equivlant) with the prior approval of engg. Incharge

SITC of UHF Wireless Handheld Microphone System, Receiver: Frequency range 524 to 865 MHz, Up to 12 compatible systems per frequency band, Dynamic Range: 100 dB A-weighted, System Distortion 0.5% THD typical, 1/4" and XLR audio outputs, Transmitter: Dynamic, Cordoid Poler pattern, Frequency range 50Hz to 15 KHz, RF Output Power 10 mW, -10 dB gain attenuation etc. all complete (Make: christle,nec,barco or equivlant) with the prior approval of engg. incharge

SITC of UHF Wireless Lavalier Microphone System, Receiver: Frequency range 524 to 865 MHz, Up to 12 compatible systems per frequency band, Dynamic Range: 100 dB A-weighted, System Distortion 0.5% THD typical, 1/4" and XLR audio outputs, Body Pack Transmitter: Condenser, Omnidirectional, Frequency range 50Hz to 20 KHz, RF Output Power 10 mW, -10 dB gain attenuation etc. all complete. (Make: christle,nec,barco or equivlant) with the prior approval of engg. incharge

SITC of UHF Antenna Distribution System, 4-way active antenna splitting etc all complete (Make: christle,nec,barco or equivlant) with the prior approval of engg. Incharge

SITC of Omnidirectional Antenna with dipole reception pattern etc all complete (Make: christle,nec,barco or equivlant) with the prior approval of engg. Incharge

SITC of Anteena cable - 100 feet etc all complete (Make: christle,nec,barco or equivlant) with the prior approval of engg. Incharge

SITC of Dynamic Vocal Microphone, With Mute Switch, Frequency Response : 50 to 15,000 Hz, Polar Pattern : Cardioid, Sensitivity (at 1,000 Hz Open Circuit Voltage) : –54.5 dBV/Pa (1.85 mV) 1 Pa = 94 dB SPL, Impedance : Rated impedance is 150Ω (300Ω actual) for connection to microphone inputs rated low impedance etc all complete (Make: christle,nec,barco or equivlant) with the prior approval of engg. incharge

SITC of Dynamic Instrument Microphone, Frequency Response : 40 to 15,000 Hz, Cardioid, Sensitivity (at 1,000 Hz Open Circuit Voltage) : –56.0 dBV/Pa (1.6 mV) 1 Pa = 94 dB SPL, Impedance : Rated impedance is 150Ω (310Ω actual) for connection to microphone inputs rated low impedance etc all complete ( Make: christle,nec,barco or equivlant) with the prior approval of engg. incharge

SITC of Drum Microphone Kit, 3 Dynamic Microphone for Snare and Toms, 1 Dynamic Microphone for Kick Drum, 1 Cardioid Dynamic Instrument Microphones, 3 Cardioid Condenser Instrument Microphones, 3 Universal Drum Mounting System etc all complete (Make: christle,nec,barco or equivlant) with the prior approval of engg. inchargewith the prior approval of engg. incharge

SITC of 48 Channel Digital Mixing Console, 24 Microphone Input, 25 Faders / 6 Layers, 12 Stereo mixes output, 3 Stereo Matrix, 8 Stereo FX Engines with dedicated returns, 64ch I/O Port for audio networking, 32×32 USB audio interface, AES output,, 7” capacitive touchscreen, 96kHz, 96Bit, with dante interface etc all complete (Make: christle,nec,barco or equivlant) with the prior approval of engg. incharge

SITC of DSP, 8 balanced microphone or line level inputs, 8 balanced line level outputs, 8 GPI/O multi-function ports, Supports adaptive echo cancellation (AEC), adaptive feedback control (AFC), automatic gain control (AGC), automatic mixture control (AMC), Up to 16 settings can be preset, Built-in USB sound card for recording and playing digital audio all complete (Make: christle,nec,barco or equivlant) with the prior approval of engg. incharge.

SITC of 6.5" Ceiling Speaker, 2 Way, Low Impedance Power 30 W @ 8 Ohm, 7.5W / 15W / 30W at 100V, Frequency Range 90 Hz - 20 KHz, Sensitivity 88 dB, Max SPL 102 dB etcall complete (Make: christle,nec,barco or equivlant) with the prior approval of engg. incharge.

SITC of Mixer Amplifier, USB / SD / MMC recorder / player, 240 W Power out, 5-input mixer for audio control with independent volume control, 4 Microphone / Line Inputs, 1 Aux input, THD+N < 1% @ 1 KHz, Frequency Response Mic: 50 Hz - 14 KHz, Line: 30 Hz - 14 KHz all complete (Make: christle,nec,barco or equivlant) with the prior approval of engg. incharge.

SITC of Power Amplifier, 2 x 120 W at 70/100 V line, input Sensitvity 1V (±0.1V), Input Impedance 20kOhm (balanced) 10kOhm (unbalanced), Frequency Response 100 Hz - 15 kHz, Gain, 40 dB, Independent volume per channel etc all complete all complete (Make: christle,nec,barco or equivlant) with the prior approval of engg. incharge.

SITC of Left & Right FOH Speaker, 2-Way 15" Self-Powered Loudspeakers, Power Handling: 1500 watts of Class-D Amplification, Frequency Response 50 Hz – 20 kHz, Max SPL 138dB, Bi-Amp LF, HF operation, 15" LF, 3in Voice Coil Neodymium Compression Driver, 1.4 inch Exit, Buitin DSP etc all complete (Make: christle,nec,barco or equivlant) with the prior approval of engg. incharge.

SITC of Ceiling Mounting arrangement for FOH Speakers with all required accessories etc all complete (Make: christle,nec,barco or equivlant) with the prior approval of engg. Incharge.

SITC of 15" Self-Powered Subwoofers, 15in Cone, 3 in Voice Coil, Vented, Power Handling 1500W, Class D Amplification, Max SPL 132dB (peak), Frequency Response 40 Hz -125 kHz,Beam width 360° Horizontal x 360° Vertical etc all complete (Make: christle,nec,barco or equivlant) with the prior approval of engg. incharge.

SITC of Stage Monitor Speaker, 2-Way 12" Self-Powered Loudspeakers, Power Handling: 1500 watts of Class-D Amplification, Frequency Response 50 Hz – 20 kHz, Max SPL 135dB, Bi-Amp LF, HF operation, 12" LF, 2.5 in Voice Coil Neodymium Compression Driver, 1 inch Exit, Buitin DSP etc all complete (Make: christle,nec,barco or equivlant) with the prior approval of engg. incharge.

SITC of Front/Back Fill 2 Way Self Powered Loudspeaker, 8" LF, 1" HF, .4 in voice coil compression driver, Power Handling LF: 500W, HF: 500W, Frequency Response 68 Hz -20 kHz, Calculated Axial Output Limit Average PeakLF/HF 119 dB 125 dB, Electronically balanced Input, Analog, Dante support etc all complete (Make: christle,nec,barco or equivlant) with the prior approval of engg. incharge.

SITC of CD/SD/USB Player with Bluetooth receiver and FM/AM tuner, Wireless streaming from a Bluetooth-enabled device like a smartphone, tablet, or computer, Analog audio outputs: XLR Balanced, RCA Unbalanced, and Headphone, External control via RS-232C etc all complete (Make: christle,nec,barco or equivlant) with the prior approval of engg. incharge.

SITC of Rack-Mountable Control System with Onboard 3 RS‑232, 8 IR/serial, 8 relay, and Versiport I/O control ports enable direct integration with all types of third‑party equipment, iPhone, iPad, and Android device control app support etc all complete (Make: christle,nec,barco or equivlant) with the prior approval of engg. incharge.

SITC of Apple iPad with required software etc all complete with the prior approval of engg. incharge

SITC of Programmable 8 Port Relay Module & 4 digital / analogue input module 0-24 Volts DC, low-voltage relay, 6 Watts Power @ 12Volts / 240 V, 44k Input Impedence with cables & connectors as required all complete (Make: christle,nec,barco or equivlant) with the prior approval of engg. incharge.

SITC of 8 Port Managed Switch, 10/100 Mbps, 1000 Mbps, Gigabit Copper etc all complete (Make: christle,nec,barco or equivlant) with the prior approval of engg. Incharge.

SITC of Wireless Access Point etc all complete (Make: christle,nec,barco or equivlant) with the prior approval of engg. Incharge.

SITC of 35 Feet Active High Speed HDMI Cable with Ethernet, Video Resolution — Up to 4K@60Hz (4:4:4), Up to 18Gbps Data Transfer Rate etc all complete (Make: christle,nec,barco or equivlant) with the prior approval of engg. Incharge.

SITC of 50 Feet Active High Speed HDMI Cable with Ethernet, Video Resolution — Up to 4K@60Hz (4:4:4), Up to 18Gbps Data Transfer Rate etc all complete (Make: christle,nec,barco or equivlant) with the prior approval of engg. Incharge.

SITC of 35 Feet USB 3.0 Active Extender Cable, Compliant with USB 3.0 etc all complete (Make: christle,nec,barco or equivlant) with the prior approval of engg. Incharge.

SITC of 50 Feet USB 3.0 Active Extender Cable, Compliant with USB 3.0 etc all complete (Make: christle,nec,barco or equivlant) with the prior approval of engg. Incharge.

SITC of 6 feet Ultra–Slim Flexible High–Speed HDMI Cable with Ethernet, Max Resolution — 4K@60Hz (4:4:4) etc. all complete (Make: christle,nec,barco or equivlant) with the prior approval of engg. Incharge.

SITC of 3 feet Ultra–Slim Flexible High–Speed HDMI Cable with Ethernet, Max Resolution — 4K@60Hz (4:4:4) etc. all complete (Make: christle,nec,barco or equivlant) with the prior approval of engg. Incharge.

SITC of 10 Feet USB Type–C to USB-C Cable, support up to 4K@60Hz (4:4:4) resolution etc all complete (Make: christle,nec,barco or equivlant) with the prior approval of engg. Incharge.

SITC of CAT-6 Shielded control & signal cable(as per actual) etc all complete (Make: finolex or equivlant) with the prior approval of engg. Incharge

SITC of 2.5 Sqmm x 2 core(14AWG) ATC copper Conductor, Insulated Cores,PVC Sheathed Speaker Cables complete etc as required. (as per actual)(Make: finolex or equivlant))with the prior approval of engg. Incharge

SITC of 22 AWG 2 core ATC Copper Conductor,PVC Insulated, 90% ATC Copper Braid Shielded, PVC Sheathed Microphone Cable complete etc as required. (as per actual) (Make: finolex or equivlant) with the prior approval of engg. Incharge

SITC of Multi audio balanced Oxygen Free Snake cable with 16 pair of cable inside the PVC jacket etc all complete (Make: finolex or equivlant) with the prior approval of engg. Incharge

SITC of Floor Box with Confi gurable with removable modules, Comes with fl at plate inside where the ports can be customized, made up of steel and PVC etc all complete (Make: christle,nec,barco or equivlant) with the prior approval of engg. Incharge

SITC of Various Cables & Connectors etc all complete with the prior approval of engg. incharge

SITC of Rack Structure 12 U Air Cooled AV Equipment Rack with Two Nos. of Vertical Power Strips, Cantilever Selves, Cable routing perforations, 4 No. of Spin Wheels etc. all complete (Make: christle,nec,barco or equivlant) with the prior approval of engg. incharge

SITC of Rack Structure 42 U Air Cooled AV Equipment Rack with Two Nos. of Vertical Power Strips, Cantilever Selves, Cable routing perforations, 4 No. of Spin Wheels etc. all complete (Make: christle,nec,barco or equivlant) with the prior approval of engg. incharge

SITC of Stage Furnishing - Main Front Stage Curtain (Size: 16 x 8 Meter), Made out of Fire retardant Curshed ice Fabric with horizontal sliding arrangement complete, Fixing rails, brackets, sliding arrangement and Motorised operation complete with runners, master runners, pullies, 3mm steel wire rope, One HP motors - 2 Nos., Air bracker contractors, 2 Nos. micro switches for auto stop, 3 Nos. push buttons for forward, reverse and stop positions, Draped to half area when in closed position, minimum overlap at centre should be 900mm and should be stitched in double gathering with masking frill drop from prosc along with Motorised rail. with electric motor, Gear Box, running on bearings, switchable mode using Gear Box, railing System, Roller, Bearings, Relay, Limit Switch, Track etc. all complete (Make christle,nec,barco or equivlant) with the prior approval of engg. incharge

SITC of Stage Furnishing - Rear Stage Curtain (Size: 16 x 8 Meter), Made out of Glazzed Cotton / cashmilon with horizontal sliding arrangement, Fixing rails, brackets, sliding arrangement and Motorised operation complete with runners, master runners, pullies, 3mm steel wire rope, one HP motors - 2 Nos., Air bracker contractors, 2 Nos. micro switches for auto stop, 3 Nos. push buttons for forward, reverse and stop positions, draped to half area when in closed position, minimum overlap at centre should be 900mm and should be stitched in double gathering with masking frill drop from prosc along with, Motorised rail. with electric motor, Gear Box, running on bearings, switchable mode using Gear Box, railing System, Roller, Bearings, Relay, Limit Switch, Track etc. all complete (christle,nec,barco or equivlant) with the prior approval of engg. incharge

SITC of Stage Furnishing - Main Side Wings Made out of Glazzed Cotton / Cashmilon fixed on over head pivot track covered with Fabric Frame made up of MS Pipe etc. all complete (christle,nec,barco or equivlant) with the prior approval of engg. Incharge

SITC of Stage Furnishing - Frills mounted on frill bar made out of double gathering glazzed cotton / casminlon to be fitted above the stage with 32mm dia GI Pipe to Cover the lights and other other stage ceiling Gadgets etc. all complete (Make: christle,nec,barco or equivlant) with the prior approval of engg. incharge

SITC of Stage Furnishing - Side Ladder in Side Wings for Mounting Light Fixtures. Dimension: 2'x6'. Made up of with 1"x2" MS Pipe etc. all complete (Make: christle,nec,barco or equivlant) with the prior approval of engg. Incharge

SITC of Stage Furnishing - Motorized Lights Bars 10 Meter (Back, Center and FOH Light Bars) ,made with 48mm GI pipe etc. all complete with the prior approval of engg. Incharge.

SITC of COB LED Parcon / Projector Light, 1x White colour LED of 200W, Warm White (2700K) Color temperature, 200 W Power, 45º Beam angle, Operating modes DMX, Manual, Master / slave, 2 DMX channels with dimming level and strobe function, Aluminum Housing etc all complete (Make: christle,nec,barco or equivlant) with the prior approval of engg. Incharge.

SITC of LED Parcon / Projector Light, includes 60 x RGB 3in1 LEDs of 1.5W each, Dimmer: 0-100 Linear Adjustment, 0-100 Dimming Linear Adjustment, Beam angle: 25º, DMX Channels: 8 channels, DMX 512 /Auto/Manual/Audio/Master-Slave, 3XLR DMX in and Out etc all complete (Make: christle,nec,barco or equivlant) with the prior approval of engg. incharge

SITC of LED Parcon / Projector Light, R+G+B+A+UV, 30x 2W R+G+B+A+UV LEDs. (6 LEDs of each colour), Dimmer: 0-100 Linear Adjustment, 0-100 Dimming Linear Adjustment, Beam angle: 25º, DMX Channels: 9 channels, DMX 512 /Auto/Manual/Audio/Master-Slave etc all complete (Make: christle,nec,barco or equivlant) with the prior approval of engg. incharge

SITC of LED Spot Moving Head Light, 80W Ultra White LED, 12 RGB 3 in 1, 12 and 14 DMX Channels, Pan Range - 540° & Tilt Range - 270°, Gobo wheel: 9 gobos + spot. Static + shake function, Dimmer: 0-100 Linear Adjustment, Linear dimming 100% ~ 0%, Motorized Focus and Frost,LCD Easy view display, Data DmX through 3 / 5 Pin XLR’s etc all complete etc all complete (Make: christle,nec,barco or equivlant) with the prior approval of engg. incharge

SITC of Light fixture mouting clamp, Customized for suspending on fixed bars on stage made up of Aluminium or MS material, black powder coating matt black finish etc all complete (Make: christle,nec,barco or equivlant) with the prior approval of engg. Incharge

SITC of Light Fixture dual safety chain, Made up of GI wire rope bundled and twisted together, Load bearing capacity above 200 Kgs, sleve on the rope etc all complete (Make: christle,nec,barco or equivlant) with the prior approval of engg. Incharge

SITC of Power Distribution Electrical Panel, Incomer of 100A floor mount / rack mount / wall mount with nuetral separation, Incomer of L&T or Schneider make, Voltmeter, Ammeter display for reading visualization, Individual MCB control for 70 outgoing circuits, Separate incomer control for Motor control panel supply, RYB Phase indicators internally wired using IS certified wires and cables, Provided with ivery connectors for the internal terminations and external outgoing connecting points custom built etc all complete (Make: christle,nec,barco or equivlant) with the prior approval of engg. incharge

SITC of DMX Controller, 4096 DMX channels, ArtNet and sACN output, 1200 Cues CueList 30 Pages 10 Main Playbacks 20 Playbacks in Wing mode Full MIDI mapping Fan Function Parallel execution of multiple CueLists Completely configured Executor Window Numeric keypad Integrated FX Generator Multi Touch Interface Simultaneous connection ( up to 3 devices ). Rapid patching User palettes Control of size and speed of the Fx through the submasters. Virtual Dimmer etc all complete (Make: christle,nec,barco or equivlant) with the prior approval of engg. incharge

SITC of DmX splitter unit , Power In and safety fuse, 6 Output channels, 5 Pin XLR in and out supporting DMX operation as per DmX 512 protocol etc all complete etc all complete (Make: christle,nec,barco or equivlant) with the prior approval of engg. Incharge

SITC of PVC insulated PVC sheathed, 3 Core 2.5 sqmm FRLS copper Cables for Each Complete Light Set Up etc. all complete. (Make: christle,nec,barco or equivlant) with the prior approval of engg. Incharge

SITC of 3 Core DmX Cables (as per actual) etc. all complete. (Make: Finolex or equivalent) with the prior approval of engg. Incharge

SITC of Accessories, clamp etc. for above stage furnishing and lighting system etc all complete with the prior approval of engg. Incharge

LIFT:- 13 Passenger / 884kg Design, Fabrication, Supply, Installation, Testing & Commissioning of Electronic Traction Type fully automatic gearless and machine room less 13 passenger(884kg) elevator with contract speed of 1.0 m/s, AC Variable Voltage & Variable Frequency drive unit suitable for operation on 415V +/- 10% , 3 Phase, 50 Hz. AC supply, power operated SS center opening type car & landing doors(with 2hours Fire rating) & electro-magnetic brake system. Lift Car Operating Panel(COP) should be glass touch sensitive having option of door open/close, digital alarm button, position & visual direction indicator. Landing Operating Panel(LOP) should be Glass Touch Sensitive and wall mounted with visual call acceptance. Digital car positions indicator in car & at all floors with up / down direction indications, light fixtures & ventilation fan with auto fan and light off option, handrail, landing sill, pit ladder & complete all accessories serving different floors in the lift shaft. Lift Safety will be comprise with overload warning indicator, battery operated alarm bell, emergency light, 3 way intercom, CCTV interface, Automatic Rescue Device with dry maintenance free sealed batteries, infrared ray sensing door protection for full height & mechanical safety by pressure sensor, Close loop drive control, Fireman Switch & Pulse Electronics Braking Operation for manual rescue, Integrated controller in door frame & Internet Of Things (Ioee) Integration enabled solution with predictive maintenance for high uptime & connectivity. Make: SCHINDLER, OTIS, KONE, MITSUBISHI (No other make shall be accepted).

Type Of Elevator Passenger

Capacity 13 Passenger/884Kg

Speed 1.0 m/s

Headroom Height (From Last Landing Floor) 4500 mm(with hoisting beam)

Travel Height 19.5 m

Number Of Floors B,G, 1, 2,3,4

No. Of Stops 6

Shaft/Lift Well Size 2050mm x 2500mm

Car Size 1100mm x 2100mm x 2100mm

Car Interior Finishes SS Hairline Finish

Car Panels SS Hairline Finish

Car Ceiling SS Hairline Finish

Illumination and Fan type Spot Light

Flooring Granite

Car Door Finish SS Hairline Finish

Entrance One sided only

Landing Door Size 800mm X 2000mm

Landing Door Finish SS Hairline Finish

Door Opening Direction Center Opening

Bidder Name

Amount

Rajesh Kumar Batra Contractor(GSTN-06AFJPB2634M1ZI)

vasu construction co.(GSTN-06AAQFV6337D1ZX)

KULDEEP KUMAR CONTRACTOR(GSTN-06AAPFK3009G1ZG)

Rajesh Kumar Batra Contractor

vasu construction co.

Rajesh Kumar Batra Contractor

vasu construction co.