Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.9 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹10.0 L+₹4,116.80 (0.41%)Rejected-Finance | L2 | Rejected-Finance HIGHER THEN L1 BIDDER | |
| 3 | L3₹10.1 L+₹7,760.75 (0.78%)Rejected-Finance | L3 | Rejected-Finance HIGHER THEN L1 BIDDER | |
| 4 | L4₹10.1 L+₹10,291 (1.03%)Rejected-Finance | L4 | Rejected-Finance HIGHER THEN L1 BIDDER | |
| 5 | L5₹10.2 L+₹15,889.50 (1.59%)Rejected-Finance | L5 | Rejected-Finance HIGHER THEN L1 BIDDER |
Tender Value
₹9.5 L
EMD Value
₹19,000
Closing Date
9 Nov 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE
HQ 136 WORKS ENGINEERS PIN - 914136 C/O 99 APO
COMPREHENSIVE MAINTENANCE FOR OFFRS MD ACCN AT JALAPAHAR AREA UNDER AGE(I) DARJEELING
2024_MES_679103_1
CWE/136-WE/87 OF 2024-25
Open Tender
Civil Works
Item Rate
180 days
Darjeeling
Class E, Category a(I)
8 documents required · 8 mandatory
₹500
Yes
AGE(I) Darjeeling
₹19,000
Yes
19 Dec 2024
11 Oct 2024
11 Nov 2024
11 Oct 2024
9 Nov 2024
26 Oct 2024
11 Oct 2024 - 18 Oct 2024
Amount
Dismantling boarding, any description fixed in any position with nails, complete all as specified and as directed by Engineer-in-charge.
S&F 40mm thick 2nd class hardwood planed one side with tongued and grooved joints and fixed with nails as in floors, complete all as specified and as directed by Engineer-in-charge.
S&F 20mm thick 2nd class hardwood planed one side with butt joints as in shelves of cupboards, racks and pelmets, eaves board and skirting work fixed with nails, complete all as specified and as directed by Engineer-in-charge.
Dismantling timber scantling 40 Sqcm & over in section in any position as in unframed work, complete all as specified and as directed by Engineer-in-charge.
M&L for 2nd class HW as in scantlings timber fixed work clean sawn, complete all as specified and as directed by Engineer-in-charge.
M&L for preparing surfaces of wood and wood based materials, new or old of any description and girth, not otherwise described and treated with two coats of creosote oil, complete all as specified and as directed by Engineer-in-charge.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as per specified and as directed by Engineer-in-charge.
M&L for providing 10 mm thick vitrified ceramic tile, area of each tile not exceeding 0.36 Sqm as in floor, set and joint in cement slurry, jointed & pointed in white or coloured cement to match the surface including screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar 1:6, complete all as per specified and as directed by Engineer-in-charge.
M&L for providing 10 mm thick vitrified ceramic tile, area of each tile not exceeding 0.36 Sqm as in skirting/dado, set and joint in cement slurry, jointed & pointed in white or coloured cement to match the surface including screed bed or bedding layer of mortar 10 mm thick in cement mortar 1:4, complete all as per specified and as directed by Engineer-in-charge.
M&L for Coloured Glazed ceramic tiles 450 x 300 x 7 or 8 mm thick, on vertical surfaces such as skirting, dados and risers to steps etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shades of tiles over 10 mm thick screed bed or bedding layers in CM 1:4 complete all as per specified and as directed by Engineer-in-charge.
M&L for 18 to 20 mm thick granite (of any type) tiles, machine cut, bedded & jointed with grey cement slurry & pointed with white cement with admixture of pigmint to match the shade of granite stone including griding & polishing, laid over screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar 1:6, complete all as per specified and as directed by Engineer-in-charge.
Taking out old existing galvanised iron water mains 15 mm bore (including all fittings) with spigot and socket ends and fittings for re-use in the work and removing unserviceable pipes and fittings from site complete all as per specified and as directed by Engineer-in-charge.
Taking out old existing galvanised iron water mains 20 mm bore (including all fittings) with spigot and socket ends and fittings for re-use in the work and removing unserviceable pipes and fittings from site complete all as per specified and as directed by Engineer-in-charge.
S&F GI tube 15 mm bore medium grade with fittings and fixed complete to wall, ceiling or laid in floor complete all as specified and as directed by Engineer-in-charge.
S&F GI tube 20 mm bore medium grade with fittings and fixed complete to wall, ceiling or laid in floor complete all as specified and as directed by Engineer-in-charge.
Demolition of brick work or stone masonry built in any cement mortar, complete all as specified and as directed by Engineer-in-charge.
M&L for brick work with fly ash bricks straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:6, complete all as specified and as directed by Engineer-in-charge.
Taking down cement plaster of any description on brick work/stone work incl raking out joints, hacking for key, scrubbing down with water etc., complete all as specified and as directed by Engineer-in-charge.
M&L rendering 15 mm thick on fair faces of brickwork in cement mortar 1:6 finished even and smooth without using extra cement, complete all as specified and as directed by Engineer-in-charge.
M&L for 15 mm thick rendering on fair faces of brick work or one side of lathing in cement mortar (1:4), mixing with water proofing compound @ 3% by weight of cement consumed and surface finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-charge. Note: WPC shall be measured and paid separately as supply only under relevent item.
Supply only integral water proofing compound confirming to IS complete all as per specified and as directed by Engineer-in-charge.
M&L preparation of new plastered surface of wall & applying two coats of distemper oil emulsion over a coat of chalk whiting as a preparatory to distempering, complete all as specified and as directed by Engineer-in-charge.
M&L preparation of new plastered surface of wall & applying two coats of cement base paint over a coat of alkali resistant primer, complete all as specified and as directed by Engineer-in-charge.
M&L for complete removal of old decorated plastered or unplastered surfaces of walls and applying one coat of wall care putty (1 mm thick) for preparation of surfaces for distempering and applying two coat of distemper oil emulsion over a coat of chalk whiting of any tint as approved, complete all as specified and as directed by Engineer-in-charge.
M&L for applying two coat of white wash on ceiling including preparation of old surfaces, complete all as specified and as directed by Engineer-in-charge.
M&L for complete removal of existing treatement on plastered or unplastered surfaces of walls including brooming down or steel wire brushing, scrapping down smoke scoot, mould, moss and efflorescent salt, trading oil and greasy spots and applying two coat of distemper oil emulsion over one coat chalk whitening, complete all as specified and as directed by Engineer-in-charge.
M&L for preparation of old decorated wooden surfaces of any description over 10cm width or girth & applying one coat of synthetic enamel paint of any tint, complete all as specified and as directed by Engineer-in-charge.
All as per serial item No. 27 above but over steel surfaces.
M&L for preparation of new or previously untreated wood or wood based surfaces of any description, exceeding 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and as directed by Engineer-in-charge.
M&L for five coats of melamine polishing to new or existing wooden surfaces including preparation of surfaces and complete removal of existing treatment as per manufacture's instructions, complete all as specified and as directed by Engineer-in-charge.
S&F in repair stainless steel kitchen plate rack 0.85mm thick of size 31" X 30" X 10" complete all as per specified and as directed by Engineer-in-charge.
S&F in repair chromimum plated health faucet shower with CP flexible pipe up 15 mm bore with 1 m long Easy Flex tube in chrome finish with wall hook, complete all as per specified and as directed by Engineer-in-charge.
S&F in repair angle stop valves/cock, 15mm dia chromium plated, fancy type, cast copper alloy, screwed down, high pressure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete all as per specified and as directed by Engineer-in-charge.
S&F in repairs of 15mm bore fancy type Bib taps, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as per specified and as directed by Engineer-in-charge.
S&F in repairs sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420 mm bowl size 410 mm x 330 mm x 160 mm, complete all as per specified and as directed by Engineer-in-charge.
S&F in repair CP toilet paper roll holder with flap including all necessary fittings, complete all as per specified and as directed by Engineer-in-charge.
S&F in repair brass CP Soap dish and fixed to plugs with chromium plated brass screws complete all as per specified and as directed by Engineer-in-charge.
S&F in repair 15 mm bore PVC connection pipe 450mm long complete all as per specified and as directed by Engineer-in-charge.
S&F in repair vitreous china cistern mounted single piece EWC with UF soft close slim seat cover and connecting accessories 370X670X720mm in size, white in colour, including connection to drain (or outgoing pipe) and to flushing pipe, Anti-syphonage pipe, etc, and making good to floor/disturbed surfaces, complete all as per specified and as directed by Engineer-in-charge.
S&F in repair high neck single lever 15 mm bore CP basin mixer for mixing hot & cold water screwed down high pressure with or with out littered 'H' or 'C' with long screwed shank and fly nuts screwed down for iron pipe, complete all as per specified and as directed by Engineer-in-charge.
S&F in repair Brass Chromium plated tubular towel rail, 20 mm dia., D Type, 60 cm long between flanges complete all as per specified and as directed by Engineer-in-charge.
S&F in repair PTMT cabinet mirror of size 400 X 500mm with screws and all necessary fittings fixed on walls, complete all as per specified and as directed by Engineer-in-charge.
S&F in repair 15 mm bore Wall Mixer with non-telephonic head chromium plated cast copper alloy with crutch or butterfly handle screwed for iron pipe or for brass ferrule, complete all as per specified and as directed by Engineer-in-charge.
S&F in repair glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chomium plated bracket guard & railing 60 cm long, complete all as per specified and as directed by Engineer-in-charge.
Note 1:- (Applicable for all parts/items) : The bidders/contractors are advised to read tender document, all drawings & all corrigendum / amendments and general condition of contracts before entry / quoting the rates. Note 2:-The contract sum shall be arrived at after deducting amount of schedule of credit from the total quoted amount.
Darjeeling Enterprises (BID ID -3155734)
YADAV CHETTRI (BID ID -3155934)
RAI CONSTRUCTION (BID ID -3155314)
KWOK YING CHIU (BID ID -3155784)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .