Renovation of Room No 314 in Libraray Block at CSIO, Chandigarh

Amount

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. Make :- Kajaria

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water thinnable priming coat with cement primer Make :- Make :- Asian/Narolac/Dulux.

Providing and applying white cement based putty of average thickness 1-2 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. Make :- JK wall putty/Birla white/Asian

Removing dry or Oil distemper by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. Complete

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new/Old work Make :- Asian/Narolac/Dulux.

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. With cement mortar 1:4 (1 cement : 4 fine sand)

Taking out existing wooden and aluminium door/Cupborad/Window shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge.

Dismantling aluminium/ Gypsum/steel/wooden partitions, doors, windows, fixed glazing and false ceiling, plaster ,kota stone,sun film ,wall paper, pvc flooring,G.I sheets roofing including,M.S. structure, ceramic tiles,chips/ mossaic/brick/stone flooring etc including disposal of unserviceable surplus material and stacking of serviceable material with CSIO as directed by Engineer-in-charge

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/Including filling of sapce between frame and wall with sealent appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / matching colour powder coated stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and paneling to be paid for separately) : For fixed portion . Powder coated aluminium (minimum thickness of powder coating 50 micron) ( The aluminium to be cleared properly of paint etc before payment ) (Clean of aluminium to be done)

Providing and fixing aluminium work for doors, windows, ventilatorsand partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved makeconforming to IS: 733 and IS : 1285, fixed with rawl plugs and screwsor with fixing clips, or with expansion hold fasteners ncludingnecessary filling up of gaps at junctions, at top, bottom and sides withrequired PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling,C.P. brass / matching colour powder coated stainless steel screws, all complete as per architecturaldrawings and fiklling the gap between aluminium and wall with PU sealent the directions of Engineer-in-charge. (Glazing andpaneling to be paid for separately) :For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision forfixing of fittings wherever required including the cost ofPVC / neoprene gasket required (Fittings shall be paid forseparately).Powder coated aluminium (minimum thickness of powder coating 50 micron). ( The aluminium to be cleared properly of paint etc before payment ) (Clean of aluminium to be done)

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineerin- charge. Pre-laminated particle board with decorative lamination on both sides Make :- GVK/Novapan/Merico

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 kg/ sqm) Make :- Saint Gobind/Modi Guard/Atul

Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. Make :- Godrej or Equivalent

Providing and fixing aluminium Double bend handle round with SS screws etc. complete as per direction of Engineer-incharge Powder coated minimum thickness 50 micron aluminium as per direction of Engineer-in-charge

Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and as per direction of Engineer-in-charge complete. Upto 5mm depth and 5 mm width

Finishing walls/Roof with Damp Proof Paint with additives of required shade (Two coats ) including priming coat of one coat of primer applied. Base preparation of cleaning, brushing and removal of any loose/flacky materials, in case of pot holes/cracks, the same shall be repaired cement mortar Make :- Asian Damp Proof paint or Equivalent

Providing & Supply of mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture, design and pattern 16 mm Dune RH99 of Armstrong all complete as directed by Engineer in charge.

Providing & fixing vertical blinds of louvers fabric woven of approved shades.The head rail should be powder coated aluminium alloy section with tilt gear hub delrinacetal louer carriers including any other fixtures to make the blind oprational and fixing in position all complete of Make - Vista or equivalent as approved by Engineer in charge before fixing.

Labour charges for dismantling of the Ceiling Fans-5 Nos. and 2'x2' Light Panel-01 No. including, disconnection & opening of existing switch board sheets, disconnection & dismantling of IP Boxes etc. and shifting of material from site to store as required.

Wiring for circuit/ submain wiring alongwith earth wire with the 2X2.5 sq mm + 1X2.5 sq mm earth wire of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. (Note:- this item includes PVC conduite pipe + PVC wire)

Supplying and drawing of 3 x 2.5 sq. mm FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

Wiring for circuit/ submain wiring alongwith earth wire with the 2X4 sq mm + 1X4 sq mm earth wire of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. (Note:- this item includes PVC conduite pipe + PVC wire)

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing 5/6 A modular switch on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

Supplying and fixing modular 3 pin 5/6 A socket outlet on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

Supplying and fixing 15/16 A modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

Supplying and fixing modular 6 pin 15/16 A socket outlet on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

Supplying and fixing 6 Module Modular base & cover plate on existing modular metal boxes etc. as required.

Supplying and fixing 12 Module Modular base & cover plate on existing modular metal boxes etc. as required.

Supplying and fixing of U-PVC adaptable trunking system of size 100mm X 50mm complete with trunking cover etc. for housing the electrical modular box for fixing modular switch sockets, telephone socket etc, on the wall/tables/pillars etc. as required.

Supply and fixing of PVC 6 module conversation frame for CMS trunking with cover plate and blanking plate suitable for fixing in 100mmx50mm DLP U-PVC trunking for fixing the modular switch and socket 5amp./15amp. Complete as required at site.

Supply and fixing of RJ45 CAT6 Computer Jack with PVC modular box , base and cover plate suitable for fixing in 100mm x 50mm U-PVC trunking complete as required at site.

Supply of full glow G5 recessed type 30W LED Light Fitting of size 2' x 2', lumens - 3600 or more, operating voltage 230/250 Volts, 50Hz, suitable for office and complete in all respect with driver etc. Model/Make: RC370B LED36S of Philips OR equivalent model of Havells, CG or Wipro.

Installation ,Testing, Commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required.

Supplying and fixing DP sheet steel enclosure on surface/ recess along with 32 A 240 V "C" curve DP MCB complete with connections, testing and commissioning etc. as required. (Model should be got approved before installation)

Supplying and fixing 1 or 2 Module (75mmX75mm) modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.

Supplying and fixing of 25mm size of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374- 2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.

Supplying and fixing extra conduit down rod of 20 cm length G.I. pipe 15 mm dia, heavy gauge including painting etc. As required. (Note : More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)required.

ADIT FABRICATIONS