SPECIAL REPAIR OF CERTAIN ROAD FROM CHUSUL COMPANY GATE TO FOREIGN LANGUAGE WING (NORTH) AND SANITORIA LOCATION AND SPECIAL REPAIR TO CERTAIN ROADS AT AEC TRG COLLEGE AND CENTRE PACHMARHI(MP)

Amount

M&L for repair to potholes any depth, not exc 1.0Sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25mm in depth, making good by applying evenly a priming/ tack coat of bituminous primer with paving bitumen VG-30 @ 5 Kg/ 10Sqm, putting in premixed bituminous macadam, well rammed and sealed with binder i.e. paving bitumen VG-30 @ 9.80Kg/ 10Sqm, blinded with 0.09 Cum of stone chippings of 6.3mm size and again well rammed and consolidated with power roller (including supply of premixed macadam, binder and chippings) depth of pot holes not exc 30mm complete all as specified and directed.

Preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. complete all as specified and directed.

M&L for applying evenly a priming/ tack coat of bituminous primer with paving bitumen VG-30 @ 5 Kg/ 10Sqm by using mechanical sprayer on black top surface of road complete all as specified.

M&L for bituminous premixed asphaltic semi dense concrete 30mm consolidated thickness with minimum 5.5% binder content using paving bitumen VG-30 by weight of total mix, rolled and compacted to required camber and gradient using 8 to 12 tonne tandem vibratory roller complete all as specified and directed. Notes:- (i) Bituminous premixed asphaltic semi dense concrete shall be prepared in hot mix plant only. (ii) Bituminous premixed asphaltic semi dense concrete shall be laid with sensor paver only. (iii) Binder content shall be tested at site as directed by Engr-in-Charge.

M&L for premixed bituminous macadam for consolidated thickness upto 75mm or less with using 19mm graded (Grading 2) stone aggregate with minimum 4.0% binder content using paving bitumen VG-30 by weight of total mix, rolled and compacted to required camber and gradient using 8 to 12 tonne tandem vibratory roller complete all as specified and directed. Notes:- (i) Premixed bituminous macadam shall be prepared in hot mix plant only. (ii) Premixed bituminous macadam shall be laid with sensor paver only. (iii) Binder content shall be tested at site as directed by Engr-in-Charge.

M&L for preparation of existing bituminous road surfaces by removing dust, dirt grease and other foreign matters etc and after prepration of road surfaces, applying road marking having minimum 2.5mm average thickness with & including thermo plastic (Reflective) line marker paint/ compound of uniform surface finish conforming to BS 3262 (Part-I) 1989 read in conjunction with the MORTH specification 803 clause 4.2.2 on bituminous surfaces in white/ yellow colour and super imposed with glass beads conforming to BS 6088 read in conjuction with the MOST specification 803 clause 4.3.3 complete all as specified and directed. Make of Road Marker Paint/ Compound:- Asian or Thermoline as approved by AGE(I). Notes:- (i) MORTH specification 803 shall be followed strictly for execution of work & suitable machine shall be used for the marking as approved by AGE(I). (ii) Shape, size & pattern of marking shall be as approved by AGE(I).

Supply and fix in repair solar cat eye/ studs of size 125mmx 125mmx 25mm (shank 60mm) with aluminium alloy shell, high efficiency Mono-Crystalline Solar Panel 2.40V/ 0.30Watt having one Ni-Mh or NI-cd rechargable battery (1.2V/ 1600MA), Six Super Bright LEDs with 10,000 to 18,000 mcd (Millicandela) having flash rate 2 Hz and bearable weight 10 tons approx with view distance upto 1000 meters of any colour i.e yellow, red, blue, green or white as required at site, working temp 10o-75o C, working time 3 to 4 days after fully charged battery, charging time 5 to 6 hours from direct sun light, maintenance free, un-breakable poly carbonate clear facing, automatically turns on at night and turns off at dawn including all fixing arrangment as per manufactures instructions complete all as specified and directed. Make: DA 110 (DHRUV) of DARK EYE or equivalent Model of make- Road Star or Green Lite or Sun Lite as approved by AGE(I).

Supply and fix in repair aluminium casted cat eye solar reflective type of metal body alloy, size 110mm x 120mm x 24mm fixed with and including MS stud of suitable size as per Manufacturer's instructions complete all as specified and directed. (Make: DA 972 of DARK EYE or equivalent Model of make- Road Star or Green Lite or Sun Lite as approved by AGE(I).)

Supply and fix in repair CAT'S EYE/ RAISED PAVEMENT MARKER/ ROAD STUDS designed to provide enhanced, dependable road guidance to motorists in bad weather conditions, made out of strong ABS moulded body with polycarbonate/ PMMA (Acrylic) micro prismatic reflectors ultrasonically welded on the moulded ABS body for maximum retro reflection in wet and dry conditions and to be fixed with Epoxy- Resin based adhesive or Special Hot Melt Bitumen adhesive avoiding nails etc complete all as specified and directed. Make: 3M 290 Sereis of Road Star or equivalent Model of make- Dark Eye or Green Lite or Sun Lite as approved by AGE(I).

Supply and fix in repair polycarbonate reflective convex mirror of size 1000mm dia made of ABS/ fiber/ plastic body with upper collar complete with mounting hardware i.e. necessary clamps & nut bolts etc mounted on and including 50 mm dia MS pipe having 3.0M length duly painted with and including two coats of synthetic enamel paint as approved by GE over a coat of red oxide primer and fixed on the ground after necessary excavation and earth work in any type of soil, embeding the delineators on the ground with & including PCC (1:2:4) type B1 using 20mm graded stone aggregate (minimum PCC block size 200mmx 200mmx 200mm for proper grouting) complete all as specified and directed. Make of Convex Mirror:- RSCM-80 of Road Star or equivalent Model of make- Green Lite or Dark Eye or Sun Lite as approved by AGE(I).

Supply and fix in repair solar flasher/ delineators mounting on 50 mm dia pole length 1 mtr with protective cover & pole, fixed on the ground after necessary excavation and earth work in any type of soil, embeding the delineators on the ground with & including PCC (1:3:6) type B1 using 20mm graded stone aggregate (minimum PCC block size 300mmx 300mmx 200mm for proper grouting) complete all as specified and directed. Make of Delineators:- GPF-800 P of Road Star or equivalent Model of make- Green Lite or Dark Eye or Sun Lite as approved by AGE(I).

Supply and fix in repair dual-directional speed-breaker having high intensity cube corner reflector ultrasonic welded to high impact resistant ABS plastic body of colour yellow and black of size 250x345x50mm (height) provided with 4 steel nails. Shape of side body to have interlocking pattern to keep all speed breakers in a row complete all as specified and directed. Make:CAT PART No. GPL-07-06 GREENS/GREENLITE or Dark Eye or Sun Lite or road star as approved by AGE(I).

Schedule of credit amount of Rs. 6,320.00 to be deducted during AOC

pyarelal galar