Establishment of Critical Care Skill Lab at New emergency building, GMCH

Amount

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area beyond 3 sq. metres

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles above 25 mm and up to 40 mm

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:3 (1 cement :3 coarse sand)

Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.

Centering and shuttering including strutting, propping etc. and removal of form for : Lintels, beams, plinth beams, girders, bressumers and cantilevers

Columns, Pillars, Piers, Abutments, Posts and Struts

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string coures, fillets, columns, pillars, abutments, posts and struts etc. above plinth level upto floor five level, excluding cost of centering, shuttering, finishing and reinforcement: 1:1.5:3 (1 cement : 1.5 coarse sand :(zone-III) : 3 graded stone aggregate 20 mm nominal size)

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 250x10 mm

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.

Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete.

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Single rubber stopper

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed Vitrified tiles Matt/Antiskid finish of size Size of Tile 600 x 600 mm

Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Size of Tile 600x600 mm

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. 12.5 mm thick fully Perforated Gypsum Board tile made from plasterboard having glass fibre conforming to IS: 2095 part I, of size 595x595 mm, having perforation of 9.7x9.7 mm at 19.4 mm c/c with center borders of 48 mm and the side borders of 30 mm, backed with non woven tissue on the back side, having an NRC (Noise Reduction Coefficient) of 0.79, with 50 mm resin bonded glass wool backing.

20 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand)

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : Water thinnable cement primer

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade : Two or more coats on new work

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) 35 mm thick

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58- 60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. Frame size 65 x 150 mm

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 kg/ sqm)

Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge.

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately).

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps

Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required : Size 450x300x150 mm

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 40mm dia

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing toilet paper holder : C.P. brass

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms.

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore

Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15 mm nominal outer dia Pipes

20 mm nominal outer dia Pipes

25 mm nominal outer dia Pipes

Supply and installation,Testing & Commissioning of Terminal Units(Gas Outlets)with Probes/Adaptes as per ISO 9001:2015 & 3 digit CE marked company.The outlet will be equiped with primary and a secondery check valvewith suitable pressure for (O2 Cleared for medical gas and pressure tested,inlet pipe can be swiveled 360 degree for ease of installation as per spesified and directed)

Supply and installation,Testing & Commissioning of O2 flow meter as per ISO 9001:2015 & 3 digit CE marked company made with chrome plated brass bodey,graduated flow tube and cover made of polycarbonate & unbreakable. Adjustable flow by needle valve(know) with micrometric regulation. Humidifier bottle is made of unbreakable polycarbonatematerial and is autoclavable

Supply and installation,Testing & Commissioning of Terminal Units(Gas Outlets)with Probes/Adaptes as per ISO 9001:2015 & 3 digit CE marked company. The outlet will be equiped with primary and a secondery check valve with suitable prepressure for complete all as spesified and as directed for the following: For Compressed air (4Bar)

Supply and installation,Testing & Commissioning of Terminal Units(Gas Outlets)with Probes/Adaptes as per ISO 9001:2015 & 3 digit CE marked company. The outlet will be equiped with primary and a secondery check valvewith suitable pressure for (Vaccume) Cleaned for medical gas and pressure tested,inlet pipe can be swiveled 360 degree for ease of installation as per spesified and directed)

Supply and installation,Testing & Commissioning of ward vaccume unit as per ISO 9001:2015 & 3 digit CE marked company.with Regulator along with vaccume gauge,collection jar of 600 ml capacity reusable plastic collection bottle with over flow safety tap wall mounted type with bracket complete all as spesified and as directed

Copper Pipes as per Medical Grade: Llyod Certified 12 mm od X.7mm thickness

15mm od X .9mm thickness

Supply, Installation, Testing & Commissioning of Low Pressure flexible transperant Tubing

Supply, installation, Testing & Commissioning of horizontal Bed Head pannel 5ft long CE Marked, Excluded pannel, powder coated along with accessories like IV hook (O2-2 nos, Vaccum-1 no), utility BP Basket, Monitor Tray, Aluminium clamp for ward vaccum unit, LED Examination light and anti bacterial switch & socket 3 nos

Providing and fixing frameless glass partitions with 12 mm thick toughened glass

Providing and fixing Patch lock for 12 mm thick frameless toughened glass door shutter of approved brand and manufacture fixed with SS screws etc. complete in all respects as per manufacturers' specifications & as directed by Engineer-in-charge.

Providing and fixing approved brand and manufacture SS 304 Lever Handle D-type fixed with SS screws etc. complete in all respects as per manufacturers' specifications & as directed by Engineer-in-charge.

Providing and fixing approved brand and manufacture SS Handle for Glass door fixed with SS screws etc. complete in all respects as per manufacturers' specifications & as directed by Engineer-in-charge

Providing,fitting and fixing Carpet tiles of size 500x500mm with thickness not less than 4mm made of 100% Olefin Polypropleyne material,with dual backing

Providing and fixing 2 mm thick homogenous Vinyl flooring of diamond 10 technology with PUR range including all accessories like welding rod strip etc. installation complete. The product conforms to Group "T" wear resistance as per EN649 clean room certified with class "A" as per ASTMF 5100 with flammability resistance of Class BF1, -S1, Slip resistance of Class R9 as per DIN 51130 and exhibit Anti Static behaviour, resistance to Bacteria, resistance Staining, sustainability to castor chair.

Providing and fixing Roller Blinds

Providing and fixing Curtains

Providing and fixing Glass films with one side vision

Providing ,fitting and fixing chrome plated robe hook complete as direted and specified.

Providing ,fitting and fixing CP Elbow Action Bib cock.

Providing ,fitting and fixing Hand Shower (Health Faucet).

Providing ,fitting and fixing 2 Way Bib Cock.

Providing ,fitting and fixing PVC Connection Pipe (600 mm long).

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required. 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

4 X 6 sq. mm + 2 X 6 sq. mm earth wire

4 X 10 sq. mm + 2 X 6 sq. mm earth wire

4 X 16 sq. mm + 2 X 6 sq. mm earth wire

Supplying and fixing following modular switch /socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 amps switch

15/16 amp switch

3 pin 5/6 amp socket outlet

6 pin 15/16 amp socket outlet

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required. 1 or 2 Module (75mmX75mm)

3 Module (100mmX75mm)

6 Module (200mmX75mm)

8 Module (125mmX125mm)

12 Module (125mmX125mm)

Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required. 1 or 2 Module

3 Module

6 Module

8 Module

12 Module

Supplying and fixing following size/ modules, PVC box along with modular base & cover plate for modular switches in surface etc as required. 1-2 Module (75mmX75mm)

3 Module (100mmX75mm)

8 Module (125mmX125mm)

12 Module (200mmX150mm)

Supplying with fitting fixing of surface & wall mounted LED luminaries complete with all accessories including driver directly on wall / ceiling including connection with 1.5 sq mm P.V.C. insulated S.C.copper conductor as required and as directed by the department. ( BAJAJ/Crompton/PHILIPS/Havells or equivalent considering the mother items rate and specification) a) 18W 4ft LED Batten

b) 10W 2ft LED Batten

Supplying and commissioning of the following indoor recessed Type Round Luminairs complete with all accessories including driver in the false ceiling ( Armstrong / Gypsum or similar type) mounted with necessary support and connection with 1.5sqmm PVC insulated SC copper conductor as required and as directed by the deptt.(Surya or equvilant make) 15W, recessed round Type LED fitting

Supplying and commissioning of the following indoor recessed Type Luminairs complete with all accessories including driver in the false ceiling (Armstrong / Gypsum or similar type) mounted with necessary support and connection with 1.5sqmm PVC insulated SC copper conductor as required and as directed by the deptt. (Crompton or equivalent make) 24W, recessed Type (300mm X 300mm) LED fitting

Supplying and commissioning of the following indoor recessed Type Luminairs complete with all accessories including driver in the false ceiling (Armstrong / Gypsum or similar type) mounted with necessary support and connection with 1.5sqmm PVC insulated SC copper conductor as required and as directed by the deptt. (Crompton or equivalent make) 30W, recessed Type (600mm X 600mm) LED fitting

Supplying and fixing of following ways surface / recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's (but without MCB's and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) 4 way (4 + 12), Double door

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 2 + 6 way, Double door

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole

Double pole

Supplying fitting fixing offollowing 4P 240-440V 'C' Series 10ka MCB in the existing DB/panel as specified and directed by the department. (Havells or equivelent make) 63A 4P 240-440V 'C' Series 10ka MCB

Supplying including fitting fixing of following A.C. Ceiling fan (ISI Marked) complete with all accessories like down rod, canopy etc. of following sweeps with making necessary connection as approved by the Deptt.)as required complete and as directed by the Department [Without regulator]. (USHA or Equivelent make) 1200mm Sweep

Supplying including fitting fixing of following A.C. Exhaust fan in the existing hole on the wall of following sweeps with making necessary connection as approved by the Deptt.)as required complete and as directed by the Department. (USHA or equivelent make) 230mm Sweep High speed Heavy duty

Supplying including fitting fixing of following A.C. Wall fan in the wall of following sweeps with making necessary connection as approved by the Deptt.)as required complete and as directed by the Department. (USHA or Equivelent make) 400mm Sweep

Supply, Installation, Testing & Commissioning of Wall Mount 12U x 550 W x 450 D System Rack MAKE: D-LINK

Supply, Installation, Testing & Commissioning of Patch Panel Cat 6 UTP Keystone Type- 24 Port-Fully Loaded MAKE: D-LINK

Supply, Installation, Testing & Commissioning of 24 Port 10/100/1000Mbps PoE + 2 SFP Port Switch MAKE: D-LINK

Supply, Installation, Testing & Commissioning of 24 Port 10/100/1000Mbps Desktop Switch MAKE: D-LINK

Supply, Installation, Testing & Commissioning of CAT6 UTP 24AWG PATCH CORD:1M (D-LINK)

Supply, Installation, Testing & Commissioning of 2MP IP Fixed Dome Network Camera Day/night functionality SmartIR, up to 30 m (98 ft) IR distance 2D/3D DNR (Digital Noise Reduction) Ultra 265,H.265, H.264, MJPEG MAKE: CP-PLUS / Hikvision etc.

Supply, Installation, Testing & Commissioning of 16 CHANNELS NETWORK VIDEO RECORDER MAKE: CP-PLUS

Supply, Installation, Testing & Commissioning of 4TB 7200 RPM Surveillance HDD (Hard Disk Drive) MAKE: Seagate / WESTERN DIGITAL

Supply, Installation, Testing & Commissioning of 300Mbps Wireless N Ceiling Mount Access Point MAKE : approved make

Supply, Installation, Testing & Commissioning of Cabinet with 2Trunk 1 Digital 16 Extension EPABX system MAKE : SYNTEL

Supply, Installation, Testing & Commissioning of Analog Phone with Display

Supply, Installation, Testing & Commissioning of 20Pair MDF board with Krone Box

Supply, Installation, Testing & Commissioning of 6 CORE Single Mode Fiber Optic Cable

Supply, Installation, Testing & Commissioning of 6 CORE Single Fiber Media Convertar [Fiber Ethernet Convertar]

Supply, Installation, Testing & Commissioning of 6 CORE Single Fiber Cable Enclosure

Supply, Installation, Testing & Commissioning of OFB Patch Cord cable

Supply, Installation, Testing & Commissioning of 82cm (32 inch) Display (LED TV) with HDMI port, PJ45 LAN port etc.

Supply, Installation, Testing & Commissioning of 1200cm (43inch) Display (LED smart TV) with HDMI port, PJ45 LAN port etc.

Supply, Installation, Testing & Commissioning of 165cm (65 inch) Display (LED smart TV) with HDMI port, PJ45 LAN port etc.

Supply, Installation, Testing & Commissioning of r 2way Counte Comunication system Ahuja Make

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed steel/ PVC conduit as required. 1 run of cable

2 run of cable

3 run of cable

Supply,Installation, Testing and Commissioning of Variable Refrigerant Volume type multi unit air-conditioning system complete with indoor and outdoor units with individual controller for cooling operations.The quoted price should include cost of all material, consumable, all taxes, labour, commissioning etc. Outdoor Unit Supply , installation , testing and commissioning of Variable Refrigerant Volume Outdoor Unit complete with hermitically sealed scroll compressor as per following nominal capacities complete with protective coated fins, mounting frame, casing, microproccessor panel, and other standard accessories : i) Microproccessor panel , ii) First charge of refirigerant R 410A , iii) Protective coated fins iv)Mounting frame with isolation pad , all required accessories, structural support and civil foundation. v) Interconnecting Pipes for Liquit, Discharge and Suction vi) Interconnecting Cables and Earthing from nearest given point .

SITC of VRV/VRF Evaporating (Indoor) Units Complete with single phase/ three phase low-noise centrifugal fan, cooling coil, filter, electronic expansion valve & Y Joints with wired remote control inlcuidng connecting the indoor unit with a power cable & plug top to power point provided near the unit (including Canvas Connection) Supply , installation , testing and commissioning of Indoor VRV/VRF 4 - Way Round Flow Ceiling mounted cassette Type Unit with Independent Vane Control & varibale air flow as per following nominal capacities complete with i) Expansion and mixing arrangements ii) Power Supply interconnections iii) Controlling interconections iv) Piping interconnections v) Supending accessories vi) Insulated Drain pipe line vii) with wireless remote (a) Capacity: 5.0 HP

Capacity: 4.0 HP

Supply , installation , testing and commissioning of Indoor VRV/VRF Hiwall Ac as per following nominal capacities complete with i) Expansion and mixing arrangements ii) Power Supply interconnections iii) Controlling interconections iv) Piping interconnections v) Supending accessories vi) Insulated Drain pipe line vii) with wireless remote (a) Capacity: 2.5 HP

Capacity: 1.6 HP

Capacity: 0.8 HP

UNITARY AC SYSTEM Supply , installation , testing and commissioning of Air Cooled Unitary Air Conditioners suitable to operate from 415+- 10% volt , 50 Hz , single/three phase power supply and consisting of hermitically sealed compressor and having R32 as refrigerant . The scope of work will include IDU & ODU installation on Frame, nitrogen flushing , pressure testing and electrical connection between IDU and ODU (Make : Daikin) Hiwall Split Ac 1.0 TR Inverter 3 star

1.5 TR Inverter 3 star

SITC of Refrigerant Piping For VRV/VRF System/Unitary Sysytem Hard drawn copper piping in brazed construciton, complete with nitrile rubber insulation, supports/suspenders, as per enclosed specifications. Minimum wall thickness of copper refrigerant pipes shall be as per Copper pipe-ASTM B88, L-Type standard. BRAZZING TO BE DONE ONLY WITH HARRIS USA BRAZING ROD.

Supply, Installation, Testing & Commissioining of Shielded control cum transmission cabling between ODU & IDU 2C X 1.0 Sqmm Cu Cable in Riggid PVC Conduit duly supported and saddled as per specification & as directed by the consultant. (note : it is important to lay one spare cable for redundancy)

Drain Piping Providing and fixing condensate drain piping with u-PVC pipe with 9mm thick nitrile tube insulation of following sizes one end on the pipe will be connected to the indoor unit of the air conditioner and the other end will be terminated to the nearest apron drain or suitable termination drain pipe complete with all fittings and support etc complete in all respect as directed by the engineer.

Supplying, fitting & fixing of Signage as per requirement, specified and directed by the Deptt.

M/s. Jaichand Lal Singhi