Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹43.1 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹43.8 L+₹71,371 (1.66%)Rejected-Finance | L2 | Rejected-Finance Other than L1 | |
| 3 | L3₹45.4 L+₹2.4 L (5.48%)Rejected-Finance 146 D POCKET B MAYUR VIHAR PHASE II DELHI 110091 EAST DELHI 110091 | EAST | DELHI | 110091 | L3 | Rejected-Finance Other than L1 | |
| 4 | L4₹46.6 L+₹3.5 L (8.13%)Rejected-Finance | L4 | Rejected-Finance Other than L1 | |
| 5 | L5₹47.6 L+₹4.6 L (10.6%)Rejected-Finance | L5 | Rejected-Finance Other than L1 |
Tender Value
₹49 L
EMD Value
₹98,000
Closing Date
24 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Satwari
GE Satwari Jammu
COMPREHENSIVE REPAIRS TO TOILETS AND COOK HOUSE AND OTHER OTM BUILDINGS UNDER AGE B/R II UNDER GE SATWARI
2023_MES_598977_1
GEJM-12/2023-24
Open Tender
Civil Works
Item Rate
270 days
Satwari Cantt
D Class Cat a i b i
9 documents required · 9 mandatory
₹500
GE Satwari
₹98,000
Yes
12 Aug 2023
27 May 2023
26 Jun 2023
27 May 2023
24 Jun 2023
12 Jun 2023
Amount
Taking down cement plaster of any description on brick or stone walls or from concrete surface incl raking out joints, hacking for key, scrubbing down with water etc and removing unserviceable material outside the premises all as specified.
Demolition of brick work built in cement mortar or cement lime mortar incl all quoins, arches pillars etc and removing unserviceable material exc 100 mtr as specified.
M&L Brick work with subclass 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified.
M&L Brick work with subclass 'B' bricks, old size bricks, straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6 but except bricks complete all as specified.
M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified.
M&L for rendering 15 mm thick in CM 1:6 on other than fair face of brick work/ stone wall surfaces finished even and smooth with out using extra cement all as specified.
M&L for rendering 10 mm thick in CM 1:4 on fair face of brick work/ stone wall surfaces finished even and smooth without using extra cement all as specified. ( incl all necessary scaffolding, lifting arrangement for three story building on external surfaces).
Material and labour for rendering 05mm thick in CM (1:3) as in ceiling finished even and smooth with out using extra cement.
M&L for preparation of new plastered or unplastered surfaces of ceilings to achieve smooth and even surface and applying three coats of white washing complete all as specified and as directed by Engineer-in-charge.
M&L for preparation of new plastered surfaces of walls & applying two coats of oil bound distemper over two coat of wall care putty of 1 to 2 mm thick and preparing the surfaces for distempering and incl a coat of primer complete all as specified.
M&L for preparation of new plastered/ concrete surfaces of walls to achieve smooth and even surface and applying two coats of cement based paint over and including one coat of primer (up to 4th storey with necessary/scaffolding) complete all as specified and asdirected by Engr-in-charge.
Writing letters or figures (Block, Roman. Italic or Indian) n.exc 30cm high including obliterating old writing of any description n.exc 0.2 Sqm with paint to match existing work complete all as specified Such as NP-02,P-101,T-104
Taking down shutters of any description exc 1.00 Sqm and not exc 2.00 Sqm each and removing from the site all as specified & directed.
Taking down shutters of any description exc 2.00 Sqm each and removing from the site all as specified & directed.
Taking down chowkats or frames with shutter (with out taking off shutter from the frame) n exc 1.5 sqm each incl cutting holes for taking out hold fast or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.) all as specified and directed by Engr-in-charge.
Taking down chowkats or frames with shutter (with out taking off shutter from the frame) exc 1.5 sqm & n. exe 4 sqm each incl cutting holes for taking out hold fast or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.) all as specified and directed By Engr-in-charge.
S & F pressed steel frames made of size 1.25mm thick MS steel for door with one or more rebates incl lugs, hold fast, lock strike plate etc complete of size 105 x 60mm including PCC 1:3:6 as in back fill to chowkats all as spfd.
S & F pressed steel frames made of size 1.25mm thick MS steel for door with one or more rebates incl lugs, hold fast, lock strike plate etc complete of size 125 x 60mm including PCC 1:3:6 as in back fill to chowkats all as spfd.
M&L 35 mm thick 2nd class hard wood, Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply. The size of rail and stile as per IS : 1003 (Part I), complete all as speciied.
Supply and fixing 35mm thick 2nd Class hard wood glazed,gauzed and skelton shutters open rebated and prepare to receive glass, gauge etc but divided into squares with plain chamfered or rounded mitred and rebated sash bars,stiles and rails as specified in SSR Part-I Sec 8 clause 8.24 (a) complete all as specified
M&L Flush shutters, 30 mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified. Note:- Sampel approved by Engr-in-Charge or GE.
M&L for applying two coat of synthetic enamel paint on new wooden surfaces of any description over a coat of pink primer having width/girth exceeding 10 cm complete all as specified including preparation and necessary filling by chalk putty as and where requered to make surface even and smooth.
S&F Soild PVC door frame of size 50 mm x 47mm made out of 5 mm plain coloured PVC sheet, reinforced with MS square tube supplying and fixing in opening as per specification and drawing.
Ditto all as per item No 23 above but single side prelam PVC sheet used instead of plain PVC sheet to match the colour of door all as specified and as directed.
S & F in repair Factory made solid panel PVC door shutter 30 mm thick ( style ) consisting of frame work made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour P.V.C‘ C’ channel having a PVC sheet strip 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail lock rail and bottom rail on either side and as gap inserts for top rail; and bottom rail paneling of plain, colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rail with suitable PVC sheets beading and jointed together with solvent cement S&F in frame at site as per specification.
S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with Moulded 2mm thick moulded prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face supplying & fixing in frame at site as per specification & drawing all as specified and as directed.
S&F butt hinges of mild steel cold rolled medium weight of size 125 mm as specified.
S & F butt hinges of stainless steel cold rolled medium weight of size 100mm as specified.
S&F Aluminium anodised, barrel tower bolts size 200 mm of extruded section and fixed complete all as specified. (ISI Marked)
S&F Aluminium handles, cast type, anodised Size-150mm, anodised section and fixed complete all as specified. (ISI Marked)
S&F Aluminium alloy, anodised, sliding door bolt Size 250 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified.
S&F aluminium Floor door stopper fixed complete all as specified.
S&F in repair aluminium extruded section body, door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed.
Supply and fixing in repair mild steel helical ordinary rat tail rod pattern springs 300mm including roller and roller plate complete including fixing to pressed steel frames necessary welding work all as specified and as directed.
Material and labour for (a) repairing aluminium shutters including refixing, tightening and making good with using rubber/beads and others small fixtures/fittings (door handles, door stoper etc), if required and making serviceable all as specified and directed by Engr-in-charge.
Supply and Fixing Brass Mortice lock, vertical type, size 100 mm, 4 leavers complete all as specified. ( Sample approved by Engr-in-charge)
S&F in repair 25mm outer dia stainless steel decorative drapery rod of thickness 20 gauge and for every 01 RM length, with stainless steel brackets near to ends with stainless steel finials for 25mm dia drapery rod at both ends. The drapery rod shall be projecting 150 mm outer side from the clesr opening of doors/windows.(Including necessary fittings brackets, end ball, wall to wall bracket etc)
S&F in repairs Aluminum anodized powder coated frame of size 101.60 x 44.45 made out of 1.20mm thick aluminum section fixed to floor/wall with plugs and screws complete all as specified and directed.
Supply and fixing 4mm thick aluminium composite panel (coloured sheet) and in additional other accessories for fitting complete all as specified by Engr-in-Charge.
S&F in repairs Aluminum Power coated, sliding windows three track with mosquito proofing with style 44.4x44.5x2mm thick including 4.0 mm thick coloured/tinted/frosted glass panes/wire mesh including aluminium grill and all necessary fittings and fixtures complete all as per Engr-in-charge.
S&F in repairs for Aluminum Power coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing not less than 0.55 kg/m incl necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified.
Supply and fixing in repairs 5.50 mm thick glass sheet ordinary quality tinted in aluminium doors/windows complete, exceeding 0.5 Sqm in each pane.
S&F steel window 1.25 mm thick Box type (Double Shutter) ERW hollow P section of size 60 mm x 25 mm single rebated comprises glazed & wire gauged skelton shutter ERW sec 50 mm x 20 mm and 1 mm thick with two Nos sash bar of T- section 20 mm x 3 mm complete welded to frame with one vertical mullion of ERW box type T- section of size 60 mm x 25 mm and 1.25 mm thick including cutting holes and making good dismantled portion in PCC 1:2:4 type B-1 four No for each window incl following fitting welded to frame shutter hold fast of 150 mm long of 12 mm x 3 mm FI made to shape 4 No, handle of Z section 20 mm x 25 mm x 100 mm long 1 No per leaf, MS tower bolt 150 mm long 2 No per leaf, Z sec 20 mm x 25 mm, 100 mm long stopper 1 No on per leaf, MS Pintal hinges of size 75 mm x 12 mm 2 No per leaf fabrication, 10 mm Square bar grill, spacing of gril 100 mm center to center and fixing arrangement as per drg No CEPZ/TD-324,325/0 all as specified and as directed.
S&F steel Ventilator ( N exc 0.70 Sqm) 1.25 mm thick Box type (Double Shutter) ERW hollow P section of size 60 mm x 25 mm single rebated comprises glazed & wire gauged skelton shutter ERW sec 50 mm x 20 mm and 1 mm thick with two Nos sash bar of T- section 20 mm x 3 mm complete welded to frame with one vertical mullion of ERW box type T- section of size 60 mm x 25 mm and 1.25 mm thick including cutting holes and making good dismantled portion in PCC 1:2:4 type B-1 four No for each window incl following fitting welded to frame shutter hold fast of 150 mm long of 12 mm x 3 mm FI made to shape 4 No, handle of Z section 20 mm x 25 mm x 100 mm long 1 No per leaf, MS tower bolt 150 mm long 2 No per leaf, Z sec 20 mm x 25 mm, 100 mm long stopper 1 No on per leaf, MS Pintal hinges of size 75 mm x 12 mm 2 No per leaf fabrication, 10 mm Square bar gril, spacing of grill 100 mm center to center and fixing arrangement as per drg No CEPZ/TD-324,325/0 all as specified and as directed.
M&L for applying two coat of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description having width/girth exceeding 10 cm including preparation and rubbing with sand paper to make surface even and smooth complete all as specified
Hacking out old broken glass (any thickness,size quality or description) from any types of wooden/steel/alum (up to 4th storey) frames or stone concrete or brick surrounds glazed with putty or fixed with beads.
S&F 4 mm thick sheet glass ordinary quality glazing with steel pins,oil putty to steel windows and, beads nails etc to wooden/steel surfaces as in square n exc 0.50 sqm in each pane, all as specified.
S&F 4 mm thick figured glass, pin head/frosted type and glazing with oil putty in square n.exc 0.5 sqm in each pane.
S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples
S&F Galvanised mild wire cloth. 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples complete all as specified.
S&F in repair Galvanised mild wire cloth. 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples complete all as specified.
Takind down GI tubing of 15 mm dia and connection and incl cleaning for refixing or removel all as spfd.
Takind down GI tubing of 20 mm dia and connection and incl cleaning for refixing or removel all as spfd.
S&F 15 mm dia galvanized pipes medium grade with all fittings and fixed to wall and ceiling or laid in floors complete all as specified.
S&F 20 mm dia galvanized pipes medium grade with all fittings and fixed to wall and ceiling or laid in floors complete all as specified.
Supply and fixing 20 mm nominal outer dia Chlorinated Polyvinyl Chloride (CPVC) pipes SDR 11, having thermal stability for hot & cold water supply, including all Plain CPVC SDR 11 fittings & brass threaded fittings on walls/ceiling or laying in floors,including fixing the pipe with clamps. This includes jointing of pipes & fittings with one step CPVC solvent cement, complete as per direction of Engineer in Charge.
Supply and fixing 25 mm nominal outer dia Chlorinated Polyvinyl Chloride (CPVC) pipes SDR 11, having thermal stability for hot & cold water supply, including all Plain CPVC SDR 11 fittings & brass threaded fittings on walls/ceiling or laying in floors,including fixing the pipe with clamps. This includes jointing of pipes & fittings with one step CPVC solvent cement, complete as per direction of Engineer in Charge.
Taking down CI/PVC pipes 110 mm dia incl all fittings like bend, branch pieces, connectors, heel rest bend etc all as specified and directed.
Taking down CI/PVC pipes 75 mm dia incl all fittings like bend, branch pieces, connectors, heel rest bend etc all as specified and directed.
S&F uPVC (SWR) Type -B Type -B pipes single socketed, 110 mm dia, in any length with rubber ring joints, fix to wall complete all as specified.
S&F uPVC (SWR) Type -B pipes single socketed, 75mm dia, in any length with rubber ring joints, laid in trenches or in floors complete all as specified.
S&F uPVC (SWR) Type -B Type -B pipes single socketed, 75mm dia, in any length with rubber ring joints, fix to wall complete all as specified.
S&F uPVC (SWR) Type -B bends, 75 mm any radius complete all as specified.
S&F uPVC (SWR) Type -B bends, 110 mm any radius complete all as specified.
S&F uPVC (SWR) Type -B junction single, 75mm (Single T) equal or unequal complete all as specified.
S&F uPVC (SWR) Type -B junction single, 110 mm (Single T) equal or unequal complete all as specified.
S&F uPVC (SWR) Type -B , floor trap, (75mm diameater for outlet in mm), plain with grating including jointing with solvent cement complete all as specified.
S&F uPVC (SWR) Type -B Gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified.
S&F uPVC (SWR) Type -B vent cowl 75 mm dia complete all as specified.
S&F uPVC (SWR) Type -B reducers 110 mm dia complete all as specified.
S&F uPVC (SWR) Type -B Branch piece, 110 mmm bore, single (single Y) equal or unequal cpmplete all as specified.
S&F uPVC (SWR) Type -B Branch piece, 75 mmm bore, single (single Y) equal or unequal cpmplete all as specified.
S&F uPVC (SWR) Type -B 'P’ trap 110 mm, complete all as specified.
S&F in repair Bib tap long body 15 mm bore, standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm- 125gms). Complete all as specified.
S&F in repair Single Lever Basin Mixer without Popup waste with 450mm Long Braided Hoses fancy type complete all as specified.
S&F in repair CP pilalr cock with 450mm long braided hose, 15 mm bore fancy type complete all as specified and directed by Engr-in-charge/ GE.
S&F in repair angle valve with wall flange , cast copper alloy, chromium plated fency type screwed for 15 mm iron pipe, complete all as specified.
S&F in repair CP Bib taps,long body, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified complete all as specified.
S&F in repair Concealed Stop Cock Heavy Body Casted Cap 15 mm complete all as specified.
S&F in repair Wall Mixer 3-in-1 System with Provision for Both Hand Shower & Overhead Shower Complete with 115mm Long Bend Pipe, Connecting Legs & Wall Flange (Without Hand & Overhead Shower) fancy type complete all as specified.
S&F in repair angular stop cock with wall flange , cast copper alloy, chromium plated fency type screwed with wall flange sutable for 15 mm iron pipe, complete all as specified.
S&F in repair Bib Cock with Wall Flange cast copper alloy, chromium plated fency type screwed with wall flange sutable for iron pipe, 15 mm bore complete all as specified.
S&F in repair Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified.
S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long . Complete all as specified.
S&F in repair Corner Glass Shelf (with Bracket) as per directed by Engr-in-charge.
S&F in repair cromium plated towel rack 600mm long without lower hangers, complete all as specified.
S&F in repair 450mm Long braided hose with two 15mm nuts & rubber washers (Both Side) without nipple (Suitable for Geysers) complete all as specified.
S&F in repair 450mm Long Braided Hose with M10X1 Nipple, 15mm Nut, O-Ring & Rubber Washer (Suitable for Basin Mixers) complete all as specified.
S&F in repair Overhead Shower 125 mm dia round shape single flow with shower arm , complete all as specified.
S&F in repair Single piece-WC with UF soft close seat cover, Hinges, Fixing Accessories Set and Accessories Set,Cistern fittings, Size: 660 x 365 x 765mm, S Trap-300mm complete all as specified.
S&F in repair Urinal with complete accessories Set, CP waste cuppling, waste pipe, sprader etc. Size: 375 x 390 x 590mm complete all as specified.
S&F in repair urinal sprader cpmplete all as specified complete.
S&F in repair Urinal partition fixing accessories complete all as specified.
S&F in repair counter top wash hand basin with fixing accessories set, size: 560 x 470mm, Oval shape, including CP cuppling and PVC waste pipe complete all as specified.
S&F in repair Wall Hung Basin with fixing accessories set, size : 510 x 400mm, including cuppling and PVC waste pipe complete all as specified.
S&F in repair PVC valveless,syphonic action type, flushing cistern, low level,white with inlet, ball valve, float and handle including brackets, PVC 32 mm 'L' bend of capacity 10.0 litres and making good to dismantled/damaged floor/surfaces, complete all as specified.
S&F in repair Vitreous china wash down water closet white colour, Size(520x360x390) with 'S' trap, closed pattern with flat bottom, including seat cover complete all as directed.
Supply and fixing PVC Seat cover for EWC pan (White ) of standardd quality including hinges bolt etc all as directed by Engr-In-Carge.
S&F in repair WC Orissa pattern white with integral foot rest 580x 440 mm including L bend, & PCC bedding in 1:2:4 and making good disturbed floor connecting to trap and flush pipe compete all as specified.(Rate of including in taking out and removal of old WC seat unhygienic condition)
S&F in repair Jet Spray (Stainless Steel) with 1 meter PVC Tube complete all as specified.
S&F in repair cromium plated hand shower (health faucet) with 8mm dia 1.20m long flexible tube and wall hook, complete all as specified.
S&F in repair PVC connection 15 mm x 450 mm including PVC check nut at both ends screwed for iron pipe of 15 mm bore.
Supply and fixing PVC Waste pipe 32mm bore for required length complete with waste coupling .
Supply and fixing PVC Waste pipe, sutable for urinal, 50/40 mm bore for required length complete all as specified .
Dismantling/ disconnecting/ demolition of water storage tank of any type or description (RCC/PVC/Bricks etc) and removing from site or refixing in position.
Supply and fixing Rotational moulded polyethylene water storage tanks of 1000 litres capacity,(cylindrical vertical with closed top) with plastic lid cover, triple layered, white, hoisted and fixed in position all as specified in SSR Part-I including PTMT Ball valves high pressure with epoxy coated Aluminium rod & high density plastic ball complete, screwed for iron pipe or brass ferrule and fixed for 20 mm bore pipe, including making connections complete all as specified.
Supply and fixing Rotational moulded polyethylene water storage tanks of 500 litres capacity,(cylindrical vertical with closed top) with plastic lid cover, triple layered, white, hoisted and fixed in position all as specified in SSR Part-I including PTMT Ball valves high pressure with epoxy coated Aluminium rod & high density plastic ball complete, screwed for iron pipe or brass ferrule and fixed for 20 mm bore pipe, including making connections complete all as specified.
S&F in repair Stop valves, (sutable for 25mm bore pipe) cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified. (ISI Marked)
S&F in repair Stop valves, (sutable for 20 mm bore pipe) cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified. (ISI Marked)
Supply and fixing in repair float valves high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe of bore 20mm. ( including necessary fittings)(Min weight 210gm).
S&F PVC tank cover for 500/1000 ltr PVC water tank fix with necessary fittings complete all as specified and directed by Engr-in-charge.
S&F in repair stainless steel lock grating plain/hole size 100 mm dia including embeding in tiles with white cement.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.
Material and labour glazed ceramic coloured Digital tiles in vertical surface 300x450x7 to 8 mm thick, set and jointed in neat cement slurry and pointed white or colored cement to match the surface over and including 10 mm thick CM 1:4 all as specified. (Sample as approved & Kept in GE's sample room)
Material and labour Non - skid Digital Ceramic joint less coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm , in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and set in neat cement slurry and pointed with coloured/white cement to match the surface over and including 15 mm thick screed bed in CM 1:4. ( sample as approved & kept in GE's sample room)
Description all as item No 120 but as in vertical surfaces dado/skirting over and including a backing coat of CM 1:4, 10 mm thick complete.
Material and labour Vitrified Ceramic (Double Charged) edge cut joint free coloured or printed any shade tiles 8 to 10 mm thick (square/ rectangular) polished area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm , in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and set in neat cement slurry and pointed with coloured/white cement to match over and including 15 mm thick screed bed in CM 1:4 and laying the tiles alonwith spacer and the gaps filled with epoxy mortar all as specified and as directed. (Sample as approved & Kept in GE's sample room)
Description all as item No 122 but as in vertical surfaces dado/skirting over a backing coat of CM 1:4, 10 mm thick complete.
S&F for placing the spacer on virtified tile flooring/vertical surfaces and the gap to be filled with silicon sealant all as specified and as directed engr in charge.(Note:- Area to be measured flat).
Demolition of stone slabs and tiles of any description or thickness in floors, aprons laid bedded and pointed in any mortar.etc
Dismantling of stone slabs and tiles of any description or thickness in floors laid dry or pointed all as specified.
M&L Machine cut kota stone slab flooring 18-20 mm thick over and including cement screed bed laid and jointed cement screed bed laidand jointed with grey camant slurry mixed with pigment to match the shade of slab including rubbing and polishing complete for tread of staircase over and including 15mm thick screed bed in CM 1:4 all as specifid and directed
M&L Machine cut kota stone slab 15-18 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete for risers of staircase over and including 10mm thick fair and even plaster in CM 1:4 after roughing surfaces of old concrete/any type of plaster by picking sweeping down with water to remove dust etc.
Cutting, grinding, and polishing by machine on old kota stone floor to make mirror polishing incl filling white cement with pigment to filling of any gaps all as specified and as specified.
M&L 16 to 18 mm thick Granite black (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, over 15 mm thick CM 1:4 as directed by Engr-in-charge.
M&L Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified.
Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level)
M&L for Cement concrete type 75 mm thick D- 2, 1:4:8 as in sub base all as specified. (40mm graded aggregate)
Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.
M&L for 40 mm thick Cement concrete type B-1,1:2:4 (20mm graded aggregate) as in floor finishes/plinth protection and similar works, finished with even and smooth without using extra cement all as specified.
S&F in coloured Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with white cement and pigments all as specified
Dismantling of AC or plain or corrugated steel sheeting, any gauge, thickness, including nanital or similar pattern roof covering.
Dismantling timber scantlings 40 sq. cm and over in section, in any position all as specified.
M&L for Pre- painted galvatume aluminum zinc coating (AZ-150 Micron) GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified
M&L for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick ( AZ-150 Micron) of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
M&L Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel, gusset plates, or flat sections) including distance pieces, cleats etc Fe 410 -W (GdeE- 250) qualityA complete all as specified.
M&L Mild steel screw bolt (machine made) dia 16 to 20 mm with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, but length of bolt exc 22.5cm and n exc 30cm long complete all as specified.
M&L for PCC 1:2:4 type B 1 using (20 mm graded aggregate) as in blocks for hold fasts, benching, coping apex stones, bed plates and the like including weathering slightly rounded or chamfered angles and throating all as specified and direct. Note: Form work required for these items included in the unit rate of this item.
Dismantling of ceiling board (Fibre, pulp, any type of insulation etc) or insulation board / slabs/any thickness including cover fillets and aluminiu frame work all as specified.
Supply and fixing GI snap grid frame work (Grid size 605cm x 605cm) for false ceiling consisting of main runner 'T' of size 24mm x 32mm and 0.3mm thick , Secondary runner 'T' of size 24mmx25mm and 0.3mm thick,GI angle 24mmx24mm and 0.4mm thick,Bottom exposed capping of width 24 mm of all T-sections shall be of 0.25mm thick PPGI, hot dipped galvanised steel with zink coating not less than 120gm / Sqm ,ceiling grid system duly suspended by 4mm dia GI wire hanging from existing purlins /roof slab with butterfly clips including Gypsum ceiling tiles of size 595 x 595 x 9 mm laminated with 0.07 mm thick polyvinyl film on the face side and 10 micron metalized polyester film on the back side fixed on GI snap grid including taking down of old us material complete all as specified and directed by Engr-in- Chage.
Supply & fixing in repair Gypsum ceiling tiles of size 595 x 595 x 7 mm laminated with 0.09 mm thick polyvinyl film on the face side and 10 micron metalized polyester film on the back side fixed on GI snap grid complete all as specified and directed by Engineer-in-charge.
S&F in repair second class hard wood timber (framed) scantling fixed , wrought, complete all as specified and as directed.
Complete removal of existing water proofing treatment of any description incl under layer, taking down of cement plaster any thickness and removal of debris off the premises including grubbing up of trees and preparation of concrete surfaces by scrubbing down with steel brushes and cleaning with water to remove all loose dirt/dust.
M&L for water proofing treatment in the following sequences:- (a) Applying 1st course of bituminous primer conforming to IS -3384 @ 0.4 Kg/Sqm cover the surface till the surface properly impregnated and insolvent oil primer evoporate completely. (b) Applying 2nd coat of blown 85/25 graded bitumen confirming to IS 702 @ 1.2 Kg/sqm. (c) Applying 3rd course of APP (Atactic Polypropylene) modified polymeric membrane 3 mm thick weight not less than 3.6 Kg/Sqm with 160 Grams/Sqm non woven polyester made at centre core reinforced laid with 75 mm side overlap and 100 mm overlap. The membrane has to be laid with LPG torch and overlap sealed and finished neat complete all as specified and as directed .
M&L for preparation of newly sufrace of APP Membrane and applying two coats of bituminious based alumunium paint @ 200 ml per sqm etc
M&L for 15 mm thick plaster in cm 1:4 finished fair and even on RCC roof slab ( upto 4th storey building) incl mixing of integral water proofing compound : Note :- IWPC shall be measured and paid for separately)
Supply only Water proofing compound liquid.
M&L for repairing of concrete surfaces width n exc 100 mm such as balcony, chajjas, upward or downward facias ,column, pillar, ceiling and similar items with plain cement concrete 1:2:4 type B-0 or rendering 10-15mm thick as per site requirement in CM 1:3 without using extra cement finished even and fair complete and preperation of newly plastered surfaces and applying two coats of weather proof exterior emulsion paint incl a coat of primer and match the shade with existing painted surfaces all as specified all as specified and directed (Note:- Rates to be quoted Up to fourth storey bldgs and including necessory formwork and scaffolding required as per site condition also taking down or dismantling as required at site.
M&L for repairing of concrete surfaces width exc 100 mm and n exc 400 mm such as balcony, chajjas, upward or downward facias ,column, pillar, ceiling and similar items with plain cement concrete 1:2:4 type B-0 or rendering 10-15mm thick as per site requirement in CM 1:3 without using extra cement finished even and fair complete and preperation of newly plastered surfaces and applying two coats of weather proof exterior emulsion paint incl a coat of primer and match the shade with existing painted surfaces all as specified all as specified and directed (Note:- Rates to be quoted Up to fourth storey bldgs and including necessory formwork and scaffolding required as per site condition also taking down or dismantling as required at site.
Preparation of old painted steel surfaces having width/girth exceeding 10 cm including necessry rubbing with sand paper or grinding by hand grinder to achieve smooth and even surface and applying one coat of synthetic enamel paint on steel surfaces of any description (up to 4th storey with necessary scaffolding) complete all as specified and directed.(Note: Rates to be quoted for multiple tints in grills, gates, decorative items and similar items etc.,,)
Preparation of old painted wooden surfaces having width/girth exceeding 10 cm including necessry putty filling with knife of same colour where required to achieve smooth and even surface and applying one coat of synthetic enamel paint on wood surfaces of any description (up to 4th storey with necessary scaffolding) complete all as specified and directed.
M & L for preparation of old decorated concrete/ plastered surfaces of walls, Pillars, cornices etc by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots & rubbing with sand paper and applying one coat of oil bound distemper on old decorated wall surface including necessary filling of wall care putty on uneven surface as and where required.
Complete removal of existing treatment by mechanically including washing, rubbing down with sand paper and stopping of distempered and painted surfaces including preparation of old plastered surfaces of walls and applying two coats of water bound distemper over a coat primer on ceiling incl preparatory to distemper and applying the distemper with paint roller complete all as specified and as directed by Engineer-in-charge.
Complete removal of existing treatement surfaces by mechanically including washing and rubbing down and preparation of surface of walls, & applying two coats of oil bound distemper over two coat of wall care putty of 1 to 2 mm thick and a coat of primer complete all as specified.
M&L for preparation of old decorative plastered/concreat surface of wall, chajja, facia, face of columns, beam ect by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots & rubbing with sand paper and applying one coat of weather proof exterior emulsion paint with necessary scaffoding up to 4th storey, including necessary filling of wall care putty on uneven surface as and where required all as specified.
M&L for preperation of old painted concrete surfaces (Kerb stone, mile stone etc.,) and applying one coat of synthetic enamal paint all as specified and as directed.
Preparation of old decorated brick/concrete/ plastered/unplastered surfaces of walls, Pillars, cornices etc by brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots, rubbing with sand paper and applying one coat of cement base paint on walls, pillars, cornice etc (upto 4th storey with necessary scaffolding complete all as specified and directed.
M & L for preparation of old decorated brick /concrete plastered /un-plastered surfaces of walls, Pillars, cornices etc by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of lime white wash on the Ceiling, pillars, cornices etc. complete all as specified and directed.
Taking down carefully aluminium conductor point wiring (light, fan, socket, power socket) complete fitting such as swithes, sockets, lamp holder, utility light fitting, fan regulator etc and removing materials from sites and making good distrubed surface of walls and roofs complete all as specified and as directed.
Taking down of unsv Sub main wiring of any size
M & L for complete point wiring with 1.5 Sqmm single core multi stranded copper conductor FRLSH insulated and unsheathed heavy duty cable in colour code including contineous earth wire with cable of size 1.5 sqmm copper conductor flexible FRLSH insulated drawn in and including concealed PVC rigid conduit medium grade ISI marked after cutting chases in wall , plastering after concealing conduit , including modular galvanised flush boxes of suitable size and white cover plate with frame as per relevant IS for mounting modular switches, sockets, fan regulators etc complete all as specified and as directed for the following :- (a) One Light / Fan/ Exhaust Fan point controlled by one, one way switch 6 Amp complete
(b) One 3 pin socket outlet 6 amp independent
(c) One 3 pin socket outlet 6 amp same board
All as per srl item No 166 above but for one 3 pin socket outlet 16 Amp independent with cable of size 2.5 Sqmm for point wiring and 2.5 sqmm as in continuous earth wire.
Supply and fix in replacement of modular type switch, one way 6 Amps , 1 module complete all as specified and directed.
Supply and fix in replacement of modular type socket 5 pin, 6 Amps 2 module complete all as specified and directed.
Supply and fix in replacement of modular type switch, one way 16 Amps, 1 module complete all as specified and directed.
Supply and fix in replacement of modular type socket 5 pin, 6 A/16 Amps 2 module complete all as specified and directed.
Supply and fix in replacement of modular type fan regulator step down 120 Watt, 2 module complete all as specified and directed.
Supply and fix in replacement of ceiling rose surface, backelite, three terminal, 240 volts complete all as specified and directed.
Supply and fix in replacement of LED light fitting 1 x 18Watt, 220V, AC decorative box type with driver, holder including LED Tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete with all fixing arrengenment all as directed by Engr in chage. Note:- The LED batten and LED tube rod shall be of same make.
Supply and fix in replacement of sub main wiring with single core cable 2x 6 sq mm FRLSH insulated Unsheathed stranded copper conductor cable 1100 Volts grade in rigid PVC conduit (Concealed) medium grade alongwith 1 x 6 Sq mm FRLSH insulated unsheathed copper conductor cable as earth wire connected with main earth dolly including chesing, cutting & making good to match with the existing surface complete all as specified and directed.
Taking down and refixing of Ceiling fan/ Exhaust Fan any size/sweep, including oiling, Greasing and cleaning and applying two coats of synthetic enameled paint after preparation of surface complete over a coat of primer and down rode as per site requirenment all as specified and directed by Engr-in-charge.
THAKUR BUILDERS AND CO
AKSHAY CONSTRUCTION COMPANY
AMRIT ENTERPRISES
M/S PARAMJEET SINGH
M/S MOHAN LAL GUPTA
NARESH KUMAR AND COMPANY
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .