TP1-118/2025-26 OF CE/TP-I/CNI

Supplying, providing, fabricating and erecting M.S. Tubular Roof Truss made up of M.S.Sections viz. tubular sections, plates, angles, channels, beams, hollow section (Sail, vizak, Jindal, SLO, Nobel, Metpro, Apollo, Nezone), shall be fixed over the existing R.C.C structure and M.S.Structural framing for Puf External wall panel work including using M.S.square tubes, M.S. plates, anchor fasteners, etc., preparation of shop drawings for structural fabrication and erection confirming with IS specification. The rate shall includes for base plate fixing, Foundation bolt fixing, wall support plate fixing from existing RCC structure, drilling holes to existing structure and anchoring fixing work, fasteners, (TVS fasteners), welding fillet, abrasive material, anchor fastner HILTI Brands, industrial gas, providing and fixing of 20mm dia mechanical Anchor fastener comprising of HVU capsule with HAS-E rod of M16 5.8 grade at 600mm embedded depth inside the concrete, hire charges for hydra crane, transport charges, lead, lift, loading, unloading, etc., complete complying with standard specification and as directed by the Engineer at site.

Supplying, Providing and fixing of SINGLE SKIN ROOFING system comprises of 0.47mm thick with trapezoidal profile sheet with 8 layers protection of approved color and brand for roofing profiled with minimum yield stress 550 Mpa. Galvalume sheets conforming to AZ 150 of AS 1397 or ASTM 792 with hot-dip metalic coating of 55% AI and 45% Zn alloy having total coating mass of minimum 150 GSM/sqm. The rate includes cost of all materials, screws, sealant, cyclone washer, flashing, labour charges, all required machineries hire charge, transport charges, lead, lift, loading, unloading, etc., complete complying with standard specification and as directed by the Engineer at site.

Supplying, Providing and Fixing in position of PUF EXTERNAL WALL PANEL WORK (50MM THICK) using polyurethane foam as external wall Thermal Insulation panels or Sandwich inulated panels with external 0.50mm total coated thickness pre painted galvalume sheet with micro ribbed profile, whereas internal 0.50mm total coated thickness pre painted galvanized iron sheet with micro ribbed profile and the insulation material will be chlorofluoro carbon and hydro chlorofluoro carbon free, high performances rigid polyurethane foam(PUF) conforming to IS 12436 having density not less than 40+/- 2kg/M3, Thermal Conductivity (K-Value) 0.024 W/m.K measured at 10 degree C mean temperature along with necessary flashings such as 'L' Flashing, 'C' flashing, etc., & accessories such as screws, fasteners, sealants, etc., for fixing the panel, including cost of all materials, labour, lead, etc., Complete complying with standard specification and as directed by the Engineer at site.

Supplying, Providing & fixing of Structural Glazing with 6mm thick Clear Toughened Glass, colour anodized / Powder coated aluminum Structural Glazing / Curtain Wall Glazing / Glass Cladding, an architectural front elevation (front facade) by using colour anodized / Powder coated aluminum extruded section of size 63.50 mm X 57.15 mm X 1.5mm approximately @ 1.350 kg per meter section will be used for the all–round and intermediate section of the structural frame using 63.50 mm X 57.15 mm X 1.5 mm for Holding and Grasp the glass and also enabling as Reinforcement to the Silicone sealant Gel, Imported Polyethylene low density black spacer tape having adhesive on both the side will be used for a temporary fixing of the glass on the structural framing, paneling the structural glazing, Fixed type (Front Clip) with 6MM thick Clear Toughened Glass of SAINT GOBAIN or equivalent, Aluminium / Translucent / Grey / Black / Clear or White Silicone sealant gel of DC/ GP used for filling the gaps between the glass & the section and making the glass permanently fixed on the structural frame and also enabling waterproofing. The rate is inclusive of all material, Labour, erection charges and standard accessories such as ‘Square and L’ angle, screws, rubber beading, Sections, Glass, scaffolding arrangements, lead, lift, etc., Complete complying with standard specification and as directed by the Engineer at site.

Supplying, Providing & fixing in position of Aluminum Z Louver by using 103.20mm x 50.80mm x 1.70mm) Section, colour anodized / Powder coated aluminum architectural front elevation (front facade) by using colour anodized / Powder coated aluminium extruded section of size 63.50 mm X 57.15 mm X 1.5mm approximately @ 4.5 kg per meter section used for the all–round and intermediate section of the structural frame, 103.20mm x 50.80mm x1.70mm thick with using Outer Section 65mm x 38mm vertical and horizontal by using louver covering 50mm x 13mm Analyzed, 103.20mm x 50.80mm x 1.70mm will be used for Holding and Grasp the glass and also enabling as Reinforcement to the Silicone sealant Gel. Imported Polyethylene low density black spacer tape having adhesive on both the side will be used for a temporary fixing of the glass on the structural framing. The rate is inclusive of all material, Labour, erection charges and standard accessories, scaffolding arrangements, lead, lift, etc., Complete complying with standard specification and as directed by the Engineer at site.

Supplying and providing UPVC RAIN GUTTER WORK INCLUDING DOWNLINE using Rain Gutter of having bottom width of 18cm and height of 20cm with 4mm thick of approved brand and colour The rate includes cost of all materials, labour charges, all required machineries hire charge, transport charges, lead, lift, loading, unloading, etc., complete complying with standard specification and as directed by the Engineer at site.

CGST in % (For Bidders inside TamilNadu)

SGST in % (For Bidders inside TamilNadu)

IGST in % (For Bidders outside TamilNadu)