SPECIAL REPAIRS TO BLDG NO A-18 AT DALAPCHAND UNDER GE 867 EWS

Amount

Dismantling of plain or corrugated steel sheeting, any gauge, thickness including Nainital pattern roof covering all as specified and directed.

S&F Pre- painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering, fixed with seif tapping screws complete all as specified and as directed.

S&F Pre- painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering, fixed with seif tapping screws complete all as specified and as directed.

Dismantling of wall and ceiling boards( fiber pulp insulation etc) or insulation boards/slabs/blankets any thickness including cover fillets all as specified.

S&F GI frame work of size 605 x 605mm, for seamless celing comprising of GI perimeter chanel 0.55mm thick with two unequal flangesof 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and incl ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre.

S&F hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasterners 12.5mm dia 40mm long complete all as specified and as directed.

M&L 4mm thick asbestos cement plain building boards, fixed or laid /inserted to GI snap grid framework with screw in ceilings.

M&L three coats of white wash on ceiling on AC boards.

Demolition of brickwork or stone/boulder masonry built in cement mortor all as specified.

M & L for modular fly ash bricks as in brick work straight or curved on plan exceeding 6m mean radious built in CM (1:6) all as specified and directed.

M&L RCC type B-1, (1:2:4) (20mm graded stone aggregate) as in beams cantilevers, bressumers, lintels over 1.5 m span.

Formwork to sides and soffits of floor or roof beam,beam hunching, girders ,bressumers,lintels, cantilevers,shelves including supports, overhangs, etc. also splays between floors and beams of fair finish surface all as specified.

M&L mild steel TMT Bars 10mm dia and over cut to length bend to shape required including cranking bending spirally for column, hooking ends & binding with and including mild steel mild steel wire (annealed not less that 0.90 mm dia or securing with chip).

All as per Sl item No-13 above but 5mm dia and over upto and incl 10mm dia in stirrups, spacers and binders.

M&L 15mm thick rendering on brick or block concrete masonry walls in cement plaster 1:6 incl finished even and smooth w/o using extra cement all as specified.

M&L 20mm thick rendering in two layers of 10mm each on brick or block concrete masonry walls in cement plaster (1:4) with WPC incl finished even and smooth w/o using extra cement all as specified.

M&L preparation of new plastered surfaces of walls and applying two coat of OBD over a coat of chalk whiting complete all as specified.

M&L Preparation of plastered surfaces of walls and applying two coats of cement base paint over a coat of chalk whiting complete all as specified.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) each area n.exc 1.5 sqm all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) each area exc 1.5 sqm but n.exc 4.0 sqm all as specified and as directed.

S&F Pressed steel door frame for doors, size 165 x 60mm with one rebates incl necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and as directed.

S&F 35mm thick plain framed panelled shutter (any number of panels) of 2nd class H.W with panels of timber flat on both sides or of venerred particle boards medium density, wood particle board with commercial face veeners.

S & F 1st class hard wood 30mm thick Glazed and skeleton shutter, poen rebated and prepared to receive glass, gause,etc (without sash bar), edges of framing plain or chamfered or rounded, fitted with cut and mitred beads for securing glass etc; size of members of shutters as specified in SSR -I ,section 8, clause 8.24 (a) supplied and fitted to chowkhats.

S&F Steel windows with side hung shutters incl projecting type hinges with steel handle, and steel peg stay complete with glazing bars.

S&F Steel windows with side hung shutters incl projecting type hinges with steel handle, and steel peg stay complete without glazing bars.

S&F framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; and similar work conforming to Fe.290.Gde-E-165

S&F 3mm thick sheet glass, oridinary quality and glazing with oil putty in square n etc 0.5 sqm in each pane.

S & F Galvanised wire cloth, 0.63 mm nominal dia of wire and average width of aperature 1.4mm and fixed with tinted tacks or galvanised wire staples as in fly proof window and door ,all as specified and directed.

S&F 250 mm long aliminium anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium complete all as specified and as directed.

S&F anodised Extruded aluminium alloy handles 150mm long, fabricated type.

S&F Aluminium anodised barrel tower bolts, 200 mm long, of extruded section.

M&L Preparation and applying two coat of synthetic enamel paint over one coat of pink primer on new wooden surfaces, of any description, over 10cm width or girth not other wise described.

M&L Preparation and applying two coat of synthetic enamel paint over one coat of red oxide primer on new steel surfaces, of any description, over 10cm width or girth not other wise described.

Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premise.

M&L joint free non skid ceramic colured tiles 7 to 8mm thick, area of each tile exceeding 0.18 sqm but n.exc 0.38 sqm, in floors etc. set & jointed in neat cement slurry over 15mm screed bed or bedding layer CM 1:6 & pointd in coloured cement to match complete all as specified and as directed.

M&L glazed ceramic coloured tiles 300 x 200mm x 7mm thick on vertical surfaces such as skirting, dados, set & Jointed in neat cement slurry over 15mm screed bed or bedding layer CM 1:4 & pointed in colour cement to match complete all as specified and as directed.

S&F anodised aluminium alloy curtain rail with fixing brackets, stops, rollers etc complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description complete all as specified.

S & F Roof trusses (Framed), trussed , purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections ) including distance pieces cleats etc FE-410W (Gde E-250) quality A.

Demolition of cement concrete (Unreinforced) in ground floor and pavings n exc 15cm thick ness (below or above ground level) all as specified and as directed.

M&L 75mm thick PCC type C-2, (1:3:6) (40mm graded stone aggt) as in path, plinth protection, etc., complete all as specified and as directed.

Form work to sides of concrete foundations, footings, bases of columns and plinth beam and similer work etc in rough finished surfaces of concrete flat.

M&L for PCC type C-2, (1:3:6) (using 40 mm graded crushed stone aggregate) as in surface channels and drains complete all as specified and directed.

Taking down old existing copper/aluminium point wiring (light fan, Socket or power) Complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, light fitting etc, removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of wall, floors, etc. as directed by the Engineer-incharge.

Disconnection and taking down distribution boards, switch fuse unit, enclosure for MCB/MCB Box including MCB's of any type and size and keeping aside for reuse of serviceable one.

M&L for concealed point wiring with 1.5 Sqmm (nominal area) PVC insulated unsheathed single core multi stranded copper conductor FRLS cable 1100 volts grade (conforming to IS) drawn through and including rigid non metallic PVC conduit not less than 20mm size, medium grade with all necessary fittings, concealed wiring, for light / Exhaust fan point controlled by one switch including 1.5 Sq mm PVC insulated copper stranded conductor for earth continuity conductor and connected to earth dolly and to be terminated in 1.6 mm thick pressed steel terminal boxes concealed for mounting of fittings like switch, socket, fan regulator etc. with 3 mm thick laminated bakelite sheet cover, for housing switches, socket outlet, regulator etc. complete all as specified or directed including testing on completion. Make : Plaza/Havells/KEI

All as per item No 46 here – in – before but for one 3 / 5 -pin switch socket outlet 5 amps on independent board.Make : Plaza/Havells/KEI

All as per item No 46 here-in-before but One 3 pin socket outlet 5 Amps on the same board with other switchs with cables 1.5 Sqmm size. Make : Plaza/Havells/KEI

All as per item No 46 here – in – before but for one switch socket outlet 15 Amps on independent board with 2.5 Sqmm multi stranded and 2.5 Sq mm stranded (for earth) PVC insulated un-sheathed copper cable. Make : Plaza/Havells/KEI

M&L modular switch 1 way 6Amps, 1 module. Make : Havells/Anchor/Legrand

M&L modular socket outlet 6Amps - 2/3 pin combined 2 module Make : Havells/Anchor/Legrand

M&L Socket 6A/16A - 2/3 pin combined 2 module Make : Havells/Anchor/Legrand

M&L Modular switch 1 way 16A, 1 module Make : Havells/Anchor/Legrand

S/fix Modular white or Ivory cover plate with frame, 3 module Make : Havells/Anchor/Legrand

S/fix Modular white or Ivory cover plate with frame, 4 module Make : Havells/Anchor/Legrand

S/fix Modular white or Ivory cover plate with frame, 8 module Make : Havells/Anchor/Legrand

S&F Metal Flush box 3 module all as specified and directed.

S&F Metal Flush box 4 module all as specified and directed.

S&F Metal Flush box 8 module all as specified and directed.

Supply & Fixing ceiling rose surface bakelite 65 X 50 mm three terminal all as specified and as directed. Make : Anchor/Havells/Plaza

Supply and fixing LED lights fitting 1x 18W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. Make " Havells/Philips/Wipro/Crompton

S&F 2'x2' LED ceiling light fully diffused recessed mounted 2'x2' LED luminaire with high transmitive diffuser suitable for indoor spaces including necessary connection and dismantling of existing defective fitting complete. make Crompton cat part No "LCTLRP-24-FO-CDL" or equivalent make in Philips/Havells.

S&F LED security light suitable for 20 W LED with pressure di cast housing with epoxy power coated drak graphite grey colour finish , Prismatic ploycarbonate cover with individual LED lenses, IP65 by using 25mm dai GI bracked fixed on wall by means of nuts, botls and clamps. Make : Philips/Havells/Crompton.

S&F Decorative, wall mounting fixture in durable plastic body & designer mesh in gold finish suitable for 14 W retrofit CFL including necessary connection with 0.5 sqmm PVC sheathed 3 core copper cable and 14W LED lamp. model "Glaze" of make : Havells or equivalent in Philips/Bajaj

S&F Sheet metal enclouser Double door for MCB DB,s Phosphatised Powder Painted with bus bar 200 Amps rated Triple pole and neutral link of 4 way 415 Volts AC vertical type. Make- Legrand or equivalent in Siemens/Schneider.

As as per item No 65 above but Single pole and neutral 12 way DB 240 Volts AC. Make - Legrand or equivalent in Siemens/Schneider.

S & F MCCB 3 Pole, 415 V, fixed type, 100 Amps with breaking capacity 16 KA all as specified and directed. Make : Havell/L&T/Schneider/Legrand

Supply and fixing MCB Single pole and neutral 40 Amps capacity 10 KA 240 Volts 50 HZ, 'C' curve. Cat part No. 4086 18 of Make : Legrand or equivalent in Siemens/Schneider.

Supply and fix MCB single pole (SP), 10 kA of 5 -40 Amps capacity 240 Volts, 'C' curve. Cat part No. 4085 95 of Make : Legrand or equivalent in Siemens/Schneider

S&F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of capacity 20 Amps, 240V all as specified and directed. Make : Havells/Legrand/Schneider

Sub main wiring with FRLS two single core PVC insulated and unsheathed fire retardant multi stranded copper conductor cable 1100 volt grade IS-694, marked of 6.0 Sqmm size drawn through and including not less than 25 mm dia PVC conduit medium grade ISI marked and conduit junction boxes, terminal boxes and accessories such as tees, bends, elbows, reducers, bell mouth tube ends fixed to the surface of wall/ceiling including one run of 6.0 sqmm PVC insulated and unsheathed FRLS multi stranded copper conductor cable for earth wire continuity conductor. Make : KEI/Plaza/Havells NOTE : Two runs of single core 6.0 sqmm and one run of 6.0 sqmm copper FRLS cable as earth continuity conductor and suitable size conduit with accessories shall be measured as one length.

Sub main wiring with FRLS two single core PVC insulated and unsheathed fire retardant multi stranded copper conductor cable 1100 volt grade IS-694, marked of 4.0 Sqmm size drawn through and including not less than 25 mm dia PVC conduit medium grade ISI marked and conduit junction boxes, terminal boxes and accessories such as tees, bends, elbows, reducers, bell mouth tube ends fixed to the surface of wall/ceiling including one run of 4.0 sqmm PVC insulated and unsheathed FRLS multi stranded copper conductor cable for earth wire continuity conductor. Make : KEI/Plaza/Havells [NOTE : Two runs of single core 4.0 sqmm and one run of 4.0 sqmm copper FRLS cable as earth continuity conductor and suitable size conduit with accessories shall be measured as one length]

M&L for Earthing in repairs complete with galvanized steel earth plate electrode 600 x 600 x 6 mm buried directly in ground ( earth pit not less than 2.25 m deep bellow ground level ) with top edge of the plate not less than 1.5 m bellow normal ground level, connected to galvanized earth lead wire 4 mm dia. by means of galvanized iron or steel bolts , nuts , check nuts and washers, and connected to equipments as directed , including funnel with GI med grade watering pipe 20 mm bore , wire mesh , charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode , with concrete pit in PCC 1 : 3 : 6 type C-1 , 50 mm thick pre cast RCC 1 : 2 : 4 type B-1 cover slab reinforced with 8 mm dia deformed bar 15 cm C/C and suitable handle of 10 mm dia round bar ,GI medium grade pipe for earth lead protection including necessary excavation earth work in soft/loose soil and disposal of spoil to a distance n.exc. 50 m and necessary testing complete all as shown on electrical plate No. 3 of MES SSR Part-I and as directed.

Excavation in trenches/ foundation in soft/ loose soil not exc. 1.5 metre wide and n'exc. 1.50m deep for HT under ground cable/pole foundation and getting out including forming bottom surface to required level or slope, complete all as specified and directed by Engineer-in- Charge.

Returning filling including spreading leveling watering and well ramming in layers not exc 25Cm in soft/ loose soil, complete all as specified and directed.

Removing excavated material in soft/ loose soil n'exc 50M and depositing where directed at a level n'exc1.5M above the starting point, complete all as specified and directed.

M&L for sand cushioning to U/G cable in layers of 23cm thick( 8 Cm before laying the cable and 15Cm thick after laying the cable) in trenches complete all as specified and directed. Note :- Only Puned layers shall be measured.

M&L for common burnt bricks, sub class 'B', of size 250 x 125 x 75 mm laid in trenches for cable protection complete all as specified and directed by Engineer-in-charge.

Supply and Laying in replacement of cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor laid in trenches or on wall with the help of shadel of size 16 Sqmm 4 core as required at site. Make : Havells/KEI/Plaza

M & L GI tube light grade for passing through cables under the floor ,along the wall or along the pole of 25 mm bore and fixed to the poles/walls with suitable size of MS clamps and nut and botls/washers etc complete all as specified and as directed. Make : Jindal/TATA or equivalent

S K ENTERPRISES

JAYSHREE CONCERN

MS MAYA PRAKASH GOEL AND SONS

PRASAD PRADHAN AND SON

G K SUTHAR

RAJU TAMANG

MS BRAHMA CONSTRUCTION