REPAIRS / REPLACEMENT OF FLOORING, JOINERY, FALSE CEILING, SANITARY FITTING AND OTHER CONNECTED WORK OF OFFICE QTR, VIP AREA AND TECH AREA AT AFS UNDER GE (AF) JORHAT.

Amount

Demolition of cement concrete (unreinforcement) as in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for 75 mm thick plain cement concrete1:3:6, type C-2 (using 40 mm graded stone aggregate) as in plinth protection and court yard, laid in a slop 1:40 finished cement surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for 100 mm thick plain cement concrete1:2:4, type B-2 (using 40 mm graded stone aggregate) as in sub base, under flooring and hard standing complete all as specified and directed.

M&L for 50 mm thick plain cement concrete1:2:4, type B-1 (using 20 mm graded stone aggregate) as in flooring complete all as specified and directed.

M&L for 10 mm thick vitrified ceramic tiles (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed or bedding layer of 15 mm thick in cement mortar 1:6 complete all as specified and directed.

M&L for coloured Non skid ceramic tiles "premium quality" 450 x 350 x 7 mm thick as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile laid over and including 15 mm thick screed bed or bedding layer in cement mortar(1:6) complete all as specified and directed.

M&L for coloured glazed ceramic tiles of 300 x 200 x 7mm thick as in vertical surface such as in skirting, dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile laid over and including screed bed or bedding layer of 10 mm thick in cement mortar 1:4 complete all as specified and directed.

M&L for chequered cement concrete coloured tiles of 200 x 200 x 25mm thick as in path etc, set and jointed in neat cement slurry and pointed in pigment or grey cement to match with the tile laid over and including 20 mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed.

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and no pigment complete all as specified and directed.

Taking down cement or cement lime plaster on brick or stone walls, ceilings etc. including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

M&L for brickwork with subclass ‘B’ bricks (with old size first quality) straight or curved on plan exc 6m mean radius built in cement motar 1:6 after demolition of old brickwork or stone / boulder masonry built in cement mortar or cement lime mortar complete all as specified and directed.

M & L for 15 mm thick rendering in cement mortar (1:6) as on fair faces of brick work or concrete surface plastered surfaces finishing even and smooth (without using extra cement) complete all as specified and directed.

M & L for 20 mm thick rendering in cement mortar (1:4) as on fair faces of brick work or concrete surface plastered surfaces finishing even and smooth (without using extra cement) complete all as specified and directed.

M&L for applying two coats of oil bound distemper over a coat of primer after preparation of newly plastered surface of wall complete all as specified and directed.

M&L for applying two coats of cement base paint over a coat of primer after preparation of newly plastered surface of wall complete all as specified and directed.

M&L for Plain cement concrete1:2:4, type B-1 (using 20 mm graded stone aggregate) as in holdfast including formwork complete all as specified and directed.

M & L for applying two coats of synthetic enamel paint (1st grade quality) after preparation of new steel surfaces of any description, not otherwise described over 10 cm width or girth complete all as specified and directed.

M & L for applying one coat of synthetic enamel paint (1st grade quality) after preparation of old steel surfaces of any description, not otherwise described over 10 cm width or girth complete all as specified and directed.

S&F 3.0mm thick sheet glass, ordinary quality and glazing with oil putty in square of area n.exc 0.5 sq.m in each pane after hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S&F 15 mm dia steel water tubing, galvanised, "medium grade" with all fittings, fixed to walls, ceiling or laid in floors including taking up or down unserviceable steel water tubing with connections and fitting complete all as specified and directed.

S&F in repairs 15 mm dia bib taps "chromium plated" fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed .

S&F in repairs 15 mm dia pillar taps, cast copper alloy, with capstan heads, "chromium plated", screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S & F in repair 10 litres capacity PVC low level syphonic action type flushing cistern 'white' with inlet, ball valve, float and handle including brackets and flushing pipe, complete all as specified and directed.

S & F vitreous china wash hand basin size 580 x 450 mm (flat back or angle back type) 'white' with 32mm dia brass chromium plated waste fitting, galvanised iron "light grade" 32 mm bore waste pipe, a pair of cast iron brackets duly painted / erecting stand including cutting and pinning in ends, making good distrurbed surfaces in cement mortar 1:3 inlcuding taking down unservicable wash hand basin and connected items, complete all as specified and directed.

S&F in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, as approved, with integral foot rests (excluding flushing cistern and flush pipe), complete all as specified and directed. Make : Cat part No : C0117 of make Parryware or equivalent of Kohler, Cera, Hindware as approved by GE

S&F in repairs towel rail (450 mm long) of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats complete all specified and directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including 'Nainital' or similar pattern roof covering complete all as specified and directed.

S&F Pre- painted galvalume aluminium zinc coated GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screw complete all as specified and as directed.

S&F Pre- painted galvalume aluminium zinc coated GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall,ridge,facia etc.complete fixed with self tapping screw complete all as specified and as directed.

S&F 0.63 mm thick galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275, fixed with L-type or J-type or cranked hook bolts in lieu of screws complete all as specified and directed.

S&F 0.63 mm thick plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275, fixed with L-type or J-type or cranked hook bolts in lieu of screws complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards / slabs / blankets, any thickness, including cover fillets complete all as specified and directed.

M&L for 2nd class hardwood plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails cross sectional area exc 6.0 sqcm but not exc. 13.0 sqcm complete all as per specified and directed.

M&L for 4 mm thick plywood (3 Nos Ply) grade BWR, type BB, fixed with screws to timber frame work complete all as per specified and directed.

M & L for applying two coats of synthetic enamel paint over a coat of pink primer after preparation of new wood or wood based surfaces of any description, not otherwise described over 10 cm width or girth complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) of area not exc. 1.5 sqm, complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) of area exc. 1.5 but n. exc 4 sqm, complete all as specified and directed.

Taking down shutter of any description of area n.exc 1 sqm each complete all as specified and directed.

-Ditto- all as per Srl item No. 42 here-in-before but area exc. 1 Sqm but not exc. 2 Sqm each complete all as specified and directed.

S&F 2nd class hard wood plain ,solid, straight, chowkhat and framed, wrought, rebated on the solid, rounded or chamfered, put together with pinned at joints complete all as specified and directed

M&L for 2nd class hard wood 30 mm thick glazed and skeleton shutters open rebated and prepare to received glass, gauge etc divided into squares with plain chamfered or rounded mitred and sash bars any number edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR part I section 8 clause 8.24 (a) and fited to wooden chowkhat, complete all as per specified and directed.

M&L for 2nd class hard wood 35 mm thick glazed and skeleton shutters open rebated and prepare to received glass, gauge etc divided into squares with plain chamfered or rounded mitred and sash bars any number edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR part I section 8 clause 8.24 (a) and fited to wooden chowkhat, complete all as per specified and directed.

S&F 2nd class hard wood 30 mm thick flush shutters, solid core construction, with block board core and both faces is covered with decorative face veener with lipping frame to match complete all as specified and directed.

S&F 35 mm thick factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

M & L factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing shown in SSR PT II as approved , complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) connecting of frame made out of MS tube for top and bottom rail. MS frame shall be coverd with heat moulded plain coour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail of either side and as gap insert for top rail and bottom rail panelling of plain colour PVC to be fitted in the ms frame welded/ sealed in the stiles and rail with suitable PVC sheet and beading and jointed together with solvent cement, complete all as specified and directed.

S&F in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed .

S&F mild steel hold fast made of flat iron conforming to 410-0 or Fe-310-0 compelete all as specified and directed.

M&L for plain cement concrete 1:3:6 type C1 (using 20 mm graded stone aggregate) as in coping , PCC block for fixing of hold fast, sanitary fittings etc. complete all as specified and directed.

S&F 75 mm long,"medium weight" cold rolled mild steel butt hinges complete all as specified and directed.

S&F 100 mm long,"medium weight" cold rolled mild steel butt hinges complete all as specified and directed.

S&F 100 mm long aluminium anodised tower bolt of extruded section complete all as specified and directed.

S&F 150 mm long aluminium anodised tower bolt of extruded section complete all as specified and directed.

S&F 150 mm size, extruded aluminium alloy handles fabricated type anodised complete all as specified and directed.

S&F 100 mm size, extruded aluminium alloy handles fabricated type anodised complete all as specified and directed.

S&F 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F in repairs aluminium extruded section body door closer hydraulically regulated, designation No.3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

S&F in repairs aluminium anodised powder coated frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified complete all as specified and directed

S&F in repair aluminium anodised door shutters, aluminium section weighing 0.55 kg / m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified complete all as specified and directed.

S&F in repairs aluminium anodised window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg /m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.

S&F in repairs aluminium DECO grill of standard section, type 'A' diagonal, with U rail necessary jointing cleats, screws fixed with frame etc complete all as specified and directed.

S & F in repairs 12 mm thick prelaminated particle board "interior grade", prelaminated both sides with decorative choice laminates and fixed to aluminium framework as in partition etc. including necessary fitting complete all as specified and directed.

S & F in repairs aluminium door lock and key assembly (dead lock) of any description as approve by GE complete all as specified and directed.

M&L for 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like over and including 20 mm thick screed bed in cement mortar (1:4) and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Demolition stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.

M & L for applying one coat of synthetic enamel paint after preparation of old painted wood and wood based surfaces of any description not otherwise described over 10cm width or girth and complete all as specified and directed.

M&L for applying two coats of oil bound distemper over a layer of 1 mm thick (average thickness) plaster of paris on wall surfaces after complete removal of existing treatment over wall surfaces by scrapping down, scrubbing and washing with water etc. complete all as specified and directed.

S&F in repairs Aluminium anodised snap grid frame work (605X605mm size) for false ceiling to support the boards / tiles with anodized galvanised iron wire complete all specified and directed.

S&F harrison rails, anodised aluminium alloy, chromium plated with fixing brackets, stops, rollers etc. complete all specified and directed.

M&L in repairs for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification and drawing. complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), complete all as specified and directed. Make : Cat part No : C0278 of make Parryware or equivalent of Kohler, Cera, Hindware as approved by GE

Providing and fixing tiled false ceiling of everest designer tile lvory painted (high pressure steam cured) of 4mm thickness (as per IS 14862) of size 595 x 595 mm and any one of the design (cascade of electra) in true horizontal lever suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 sqm both side inclusive and black painted grooves on all webs ) consisting of main ''T'' runner with suitably spaced joints to get required length and 15 x 32 mm made from 0.30 mm sheet 1200 mm long spaced between main ''T'' at 600 mm C/c to from a grid of 1200 x 600 mm and secondary cross ''T'' of length 600 mm and size 15 x 32 mm made 0.30 mm thick sheet to be interlocked at middle of the 1200 x 600 mm panel to form grids of 600 x 600 mm and wall angle of size 24 x 22 x 0.40 mm and laying false ceiling tiles in the grid including required cutting / making opening for services like diffusers, grills, light, fitting, fixtures smoke detectors etc Main ''T'' runners to be suspended from ceiling using CI soffit cleats fixed to existing RCC lintel with dash fasteners. GI adjestable rods of 3 mm dia with galvanized butterfly lever clips or with 3 mm dia GI wire spaced at 1200 mm c/c along main ''T'' bottom exposed width of 15 mm of all T section shall be pre painted with polyster paint and black painted groove at center of size 4 mm depth and 4 mm width at all heights as per direction complete all as specified and directed.

S&F in repairs brass "chromium plated" shower rose of size 200 x 200 with shower arm complete all as specified and directed.

S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed.

S&F in repairs kitchen plate rack 200 mm width and size 60 x 75 cm made of 1mm thick stainless steel, complete all as specified and directed.

M&L for cleaning and removing all scale and dirt etc, from overhead PVC / RCC tanks of capacity exc. 250 ltrs but not exc 500 ltrs each and from mouths of circulating pipes, etc complete all as specified and directed.

M&L for cleaning and removing all scale and dirt etc, from overhead PVC / RCC tanks of capacity exc 500 ltrs but not exc 1000 ltrs each and from mouths of circulating pipes, etc complete all as specified and directed.

M&L for 15 mm thick lath plastering in cement mortar (1:6) on one side of lathing, finishing plaster surface even and smooth without using extra cement after Taking down plastering on lathing (other than wire-netting), without removing lathing, in cement lime or cement mortar(one side only be measured in cases where both sides are plastered) complete all as specified and directed.

Dismantling timber scantling, 40 sqcm and over in section, in any position as in unframed work, complete all as specified and directed.

M&L for 2nd class hard wood wrought fixed as in truss / purlin / scantlings complete all as specified and directed.

S & F in repairs galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

S & F in repairs 12 mm thick prelaminated particle board "exterior grade", prelaminated both sides with decorative choice laminates and fixed to aluminium framework as in partition etc. including necessary fitting complete all as specified and directed. Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ.

Bidder Name

NIHAR ENTERPRISE

M/S D J ENTERPRISE

M/S AT DHAR AND CO