ADDN ALTN TO IFA CONFERENCE HALL AND DAK SECTION AT NORTH CAMP OF AF STN BAMRAULI UNDER GE AF BAMRAULI

S&F in repairs Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed.

S&F in repairs Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall/valley gutter , fixed with self tapping screw, complete all as specified and as directed by Engr-in-Charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and as directed.

S&F of rolled mild steel section as in main and cross beams hip and jack rafters , purlins where connected to common rafters and running rails and guides for sliding door fixed with angle cleats or other connecting plates conforming to Fe-290, Gde E-165, complete all as specified and as directed.

All as per item No. 04 here-in-before but except material, complete all as specified and as directed.

Dismantling boarding, any description, fixed in any position with nails, complete all as specified and as directed.

Providing & fixing of false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles semi perforated12 mm thick micro tegular edged GRG false ceilling tiles of Size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS false 8225:1987, Noncombustible as per BS 476 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main T runners of size 15 x 32 mm of length 3000mm,cross of size 15x 32mm of length 1200 mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of size 600x 600mm, suspended from ceiling using galvanized mild steel items(galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1OOOmm length and Lshape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mmto be fixed on periphery wall I partition with the help of plastic rawl plugs at 450mm center to center and 40mm long dry wall wood screws.The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. (Make Diamond /Everest/Visaka).

M&L for 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh, complete all as specified and directed. Note : Cost of fillets, metal frame work and G.I. wire mesh is included in the same item.

M&L for 10mm thick plaster of paris ceiling (Gypsum anhydrous) to curved surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh, complete all as specified and directed. Note : Cost of Fillets, metal frame work and G.I. wire mesh is included in the same item.

M&L for 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface on any sunk or raised moulding over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh, complete all as specified and directed. Note : Cost of Fillets, metal frame work and G.I. wire mesh is included in the same item.