PROVISION OF ELECTRICAL SHED AT AD INTEGRATION 0410 BUILDING MOTORIZED ROLLING SHUTTERS IN DOMS DCMM 0305 0306 BUILDINGS VENETIAN BLINDS TO CERTAIN BUILDINGS AND ROAD FURNITURE AT VARIOUS LOCATIONS IN TECHNICAL AREA UNDER GE I RND RCI HYDERABAD

Amount

Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in any type of soil complete all as specified and directed.

Excavation in trenches not exceeding 1.50m wide and not exceeding 1.50m depth for foundation, for laying of pipes etc., forming bottom surfaces to required slope/gradient where pipes are laid and getting out in any type of soil complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick each layer as in soil complete all as specified and as directed.

Excavation in post holes (or similar holes) each not exceeding 0.5Cum, getting out, in any type of soil including returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance not exceeding 50m and making good surface complete all as specified and as directed.

Removing excavated material/soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed.

M&L, PCC 1:2:4, type B-2 using 40mm graded stone aggregate as in foundation, filling and mass concrete etc., concreting complete all as specified and directed.

M&L, 75mm thick PCC 1:4:8 type D-2 in sub base using 20mm graded stone aggregate finishing the surface even and rough including necessary formwork complete all as specified and directed.

M&L, 100mm thick PCC 1:2:4 type B-2 in sub base using 20mm graded stone aggregate finishing the surface even and rough including necessary formwork complete all as specified and directed.

M&L, brickwork with sub class 'B' bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L, RCC Nominal mix 1:2:4 type B-1using 20mm graded stone aggregate as in foundations including footings, foundations beams, plinth beams etc., and mass concrete complete all as specified and directed.

S&F, Roof trusses (framed), trussed, purlins, crane gantries rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc., conforming to Fe 410W (Grade E-250) quality 'A' complete all as specified and directed.

S&F, Rolled mild steel sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails; fixed with angle cleats or other connecting plates including drilling, fitting, riveting and/or welding or connecting with bolts and nuts (including rivets or bolts and nuts) conforming to Fe 410W (Grade E-250) quality 'A' complete all as specified and directed.

S&F, Rolled mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe 410W (Grade E-250) quality 'A' complete all as specified and directed.

S&F, 0.63mm thick plain, galvanized, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as directed.

S&F, Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet / trapezoidal steel sheet 0.50mm base metal thickness of any colour having tensile strength of 550MPa as in roof covering/cladding to wall, fixed with self tapping screws and EPDM washers complete all as specified and directed.

S&F, Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550MPa as in ridges, hips, valley gutters, drip and straight flashings, fixed with self tapping screws and EPDM washers complete all as specified and directed.

M&L, 15mm thick rendering in cement mortar 1:4, on fair faces of brick or concrete surfaces, in any height, finished even and smooth without using extra cement complete all as specified and directed.

M&L, 10mm thick rendering in cement mortar 1:6, on fair faces of brick or concrete surfaces, in any height, finished even and smooth without using extra cement complete all as specified and directed.

M&L, preparation of newly plastered surfaces of walls including cornices, pilasters, soffits of slabs and chajjas and applying two coats of cement base paint over a coat of primer complete all as specified and as directed.

M&L, preparation of new steel surfaces of any description, over 10cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.

S&F in repairs, gear operated type steel rolling shutter with chain wheel and hand chain, 1.25mm thick laths without ball bearing including top hood cover, anchoring rod, hasp and one shop coat of primer and erected in position as indicated complete and making good the disturbed surfaces etc., complete all as specified and directed.

S&F, Ball bearing for rolling shutters complete all as specified and directed.

Taking down existing mild steel shaft 125 to 150mm and 4mm thick and providing new shaft class 'C' including necessary cutting, welding, drilling holes and refixing the bearing and other accessories for rolling shutters complete all as specified and directed.

S&F, rolling shutter motor with bracket and push button suitable form rolling shutter of weight exceeding 600Kg and not exceeding 1000Kg complete all as specified and directed.

S&F, rolling shutter motor with bracket and push button suitable form rolling shutter of weight not exceeding 600Kg complete all as specified and directed. Make for item No 24 & 25: Jielong or equivalent as approved by GE.

M&L, preparation of new steel surfaces of any description, over 10cm in width or girth not otherwise described and applying two coats of synthetic enamel paint complete all as specified and as directed.

S&F, Solar control film 25 micron reflective type complete all as specified and directed. Make: Gareware or equivalent as approved by GE

S&F, Venetian blinds of approved make, vertical type using 100mm wide fabric blinds of approved colour/ shade and pattern including operating arrangement such as chord/ thread, counter weight, connecting chain etc., and necessary fittings complete all as specified and directed.

S&F, Venetian blinds of approved make, horizontal type with blinds of approved colour shade and pattern including operating arrangement such as chord/ thread, counter weight, connecting chain etc., and necessary fittings complete all as specified and directed.

S&F, PVC roller blinds of approved make, horizontal type with blinds of approved colour shade and pattern including operating arrangement such as chord/ thread, counter weight, connecting chain etc., and necessary fittings complete all as specified and directed. Make for item No 28 to 30 Vista Levlor / AMAR / MAC / MARC

M&L, Retro reflective traffic road informatory sign board made of 14gauge (2.00mm) thick aluminium sheet of size 900mm equilateral triangle having one coat of zinc chromate stoving primer and two coats of stoving enamel on back side only and front surface fully covered with white encapsulated lens retro-reflective sheeting of high intensity grade and adhered to the base by HLVA process, the size of border and sign shall be as per IRC-67/1977 and the board shall have back support frame of mild steel angle of size 50x50x6mm and shall also have suitable arrangements for fixing to the post complete all as specified and directed.

S&F, Pre coloured (Black/Yellow) PE rubber speed bumps of height 50mm and minimum weight 5210grams per running metre, highly resistant to severe impacts and harsh weather conditions, fixed to road with suitable bolts and epoxy resin complete all as specified and as directed. Make for item No 31 & 32: 3M/ Dark Eye / Sing tech / Greenlite

M&L, mild steel pipe of 100mm bore and of wall thickness 4.5mm conforming to IS-1161-1979 of grade St-240 of 3.0 meter long including necessary earthwork and excavation in post holes and PCC bed block 1:2:4 type B1 of size 450x450x600mm, removal of surplus soil and levelling the disturbed ground and applying two coats of epoxy paint to pipe complete all as specified and as directed.

Supply and spreading natural river sand of approved quality for cushioning of cable laid in trenches including compacting and leveling complete all as specified and as directed Note: Punned thickness will only be measured and paid.

Supply and laying un reinforced precast concrete cable cover, class LV Type 1, size 250mm x 150mm x 40mm, laid flat adjacent to each other, perpendicular to cable in trenches for protection of cable complete all as directed.

Supplying, laying, jointing, testing and commissioning 1100 volts grade, 3 core 25Sqmm LT XLPE insulated, PVC sheathed as per IS-7098 (Part-I), 1988 with latest amendments, galvanized steel strip or wire armoured, heavy duty, electric cables, with multistranded aluminium conductor laid in trenches/ passing through pipe/duct/road crossing or fixed on poles, walls with suitable size clamps made out of mild steel flat iron including jointing material such as crimping type lugs, brass cable glands, heavy duty double compression type etc., including disconnecting and taking down unserviceable cable complete all as specified and directed. Note: Earthwork Excavation, sand cushioning, GI pipe and cable protection will be measured and paid separately.

Cutting of existing bituminous/PCC road or flooring/plinth protection, to a width of 45cm and depth of 60cm for laying of GI pipe in road intersection for passing of LT XLPE cable including excavation in any type of soil, returning and filling in and making good top 30cm of the trench by providing PCC 1:2:4 type B1 using 20mm graded stone aggregate to flush with existing road surface complete all as directed.

S&F, 50mm dia GI pipe light grade fixed to walls/poles or laid in trenches, road crossing etc., for protection of underground cable/earth strip including sealing ends with hessian cloth impregnated with bituminous compound in ground and with teak wood bushes for ends fixed on walls/poles complete all as specified and directed.

M&L, Point wiring for one socket outlet complete with FRLS PVC insulated unsheathed cable 1100V grade conforming to IS-694, 1.5 Sqmm (nominal area) multistranded with copper conductor drawn through and including non metallic rigid PVC conduit, medium grade, of minimum 20mm dia (ISI marked) and conduit accessories concealed in walls/floors/ceilings/roofs etc., with modular metal flush boxes made out of 1.6mm mild steel sheet with modular plate and frame for mounting of switches, socket outlets, regulators etc., complete including provision of FRLS PVC insulated unsheathed 1.5Sqmm solid copper conductor as earth continuity conductor and connecting to common earth dolly complete all as specified and directed. Note: Quoted rate shall be deemed to include cost of Modular flush boxes, cover plate and frame.

S&F, Modular Switch 1 way 16Amps, 1 Module, 240V, ISI Marked complete all as specified and directed.

S&F, Modular Socket, 6/16Amps - 2/3 pin combined, 2 Module, ISI Marked complete all as specified and directed.

S&F, MCB, SP, 6 to 32Amps, 10KA, 240volts, ISI marked complete all as specified and directed. Make: Legrand Cat No 4085 87 to 4085 95 or equivalent in Siemens / C&S /Schneider / L&T as approved by GE

S&F, MCB SPN, 40 to 63Amps, 240volts, 10KA, ISI marked complete all as specified and directed. Make: Legrand Cat No 4086 18 to 4086 20 or equivalent in Siemens /C&S /Schneider / L&T as approved by GE

S&F, factory made sheet metal enclosure distribution board (MCB DB) SPN 8Way, with 100amps rated copper bus bar, neutral link and earth bar, metal door, powder coated, suitable for use on 240V, 50Hz supply, IP 43 IK 09 protection, MCBs used as out going, making good disturbed surfaces to match with existing complete all as specified and directed. Make: Legrand/Siemens / L&T / C&S / Schneider as approved by GE

M&L, Earthing complete with galvanized steel earth plate electrode of size 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25m deep below the normal ground level) with top edge of plate not less than 1.5m below normal ground level connected to GI wire 4mm dia as earth lead by means of bolts, nuts, washers and check nuts made out of galvanized iron or steel all as shown on Electrical Plate No. 3 of SSR Part-I including testing on completion complete all as specified and directed.

Note: The unit rate shall also include for earth work in any type of soil, PCC (1:3:6) type C1 chamber, RCC 1:2:4 type B-1 using 20mm graded stone aggregate, 50mm thick cover slab reinforced with 6 Nos of 8mm dia TMT bars both ways, funnel with watering pipe 20mm dia medium grade, GI protection pipe medium grade 15mm dia and wire mesh complete in addition to item No. 1(a) to (e) of preamble (Notes) under sub-heading earthing, specified on Sl. Page No. 446 of SSR Part-II.

M/S PAVANI ENTERPRISES

SHAH ENTERPRISES

M/s ANUSHA ENTERPRISES

CHARAN ELECTRICALS