Construction of Parking Bay Near LDO Tanks and Creation of Service rooms opposite casualty ( Registration Counters Security room and Driver Room) near IPD at SKIMS MCH Bemina.(Electrical Part)

Amount

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

3 x1.5 sq.mm

3 x 2.5 sq. mm

3 x 4 sq. mm

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in recess including cutting the wall and making good the same in case of recessed conduit as required.

25 mm ( for 5/6 A, 15/16 A Socket outlet )

32 mm ( For circuit wires and Sub -Mains)

Supplying and fixing of 25mm dia. of medium class PVC conduit along with accessories in surface complete as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required.

Supplying and fixing 25 mm dia flexible PVC corrogated pipe with along with all ancillaries and accessories like saddles etc. as required.

P/F of LED Flat 2x2 feet Square type suitable for Grid Ceiling for efficient heat dissipation with build in electronic driver having THD< 10% , 6000/6500 k with minimum system lumens 4000 and Maximum wattage 42, with anti glare diffuserr with energy efficient electronic driver CRI greater than 80 with system lumun efficacy greater than 110 LM/watt , surge protection 2kV or more with Burning hours greater than 50000 Hours included connection with multistrand copper conductor 3 core cable etc as required at site.

P/F of LED 4feet long batten 6000/6500k Light having extruded aluminium body with anti-glare diffuser with energy efficient electronic driver CRI ≥ 80 with minimum sytem lumens 2000 and maximum wattage 20 , IP 20 , surge proctection 2KV or more including connection with multistrand copper conductor 3 core cable etc as required at sitewith burning hours greater than 50000 Hours.( for ambulance parking shed near LDO tank)

Providing fixing well glass lights 40-45watt 6000/6500k having high pressure diecast aluminum housing with poly carbonate antiglare diffuser including connection complete as required at site.

Supply, Installation, Testing and Commissioning of 1200 mm sweep, Ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod with fan hook etc. 2nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, 350 RPM (tolerance as per IS : 374-2019),THD less than 10% and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulationresistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. The job includes the cost of dismantling of existing non functional ceiling fans wherever necessary.

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

P/F of Exhaust fan 250 mm shutter type plastic

P/F of Ply board 12 mm thick suitable size with houl for above fan 12"x12" complete with civil work.

P/f of bakalite sheet 3 mm thick of various sizes. As required at site,for inspection boxes

SITC of Electric Heater / Geyser of 35 liters of capacity as mentioned below with following parameters . 1.Energy saving. 5 Star Certification by BEE 2. Provision of Temperature regulation by means of external Knob 3. Power Rating:- 220/ 230V, 50 Hz, Single Phase. 4. Maximum Rated Pressure.= 8 bar 5. Installation Type Vertical / Horizontal mounted as per site requirement 6. Body Type:- Rust, water proof and Shock Proof outer body with attractive looks and corrosion resistant inner tank made of cold rolled steel ,resistant to hard water. 7. Element Type:- glass coated heating element to prevent from corrosion and hard water. 8.Safety Valve maximum pressure =8 bar maximum 9. Energy efficiency feature:- Should have high density PUF insulation for energy Saving 10. Anti syphon system to prevent back flow of water. 11. Should have Indicating Lamps for ON & CUTT OFF. 12. Confirming to :IS 2082:2018 , IS 302-1, IS 302-2-21

Supplying and fixing 12 way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

Supplying and fixing of 8 way VTPN surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required .

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. (a). 125 A,36KA,FPMCCB

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and ommissioning etc. as required.

Single pole

Double pole 20A

Providing and laying of spans of 50 mm sq. 3 1/2 core XLPE PVC insulated Al. cable Armored from main Bus Bar at Attendant Shelter Shed to sub D.B New Service Room. The cable should be fixed on wall complete with fixed of saddles screws etc as per site requirement

Providing and making of end termination of the 50 mm sq. 3 1/2 core LT cable included thimbled, crimpped tapped, tested and connected as per site requirements

Providing and laying of spans of 16 mm sq. 2 core XLPE PVC insulated Al. cable Armored from main Bus Bar at Attendant Shelter Shed to sub D.B New Service Room. The cable should be fixed on wall complete with fixed of saddles screws etc as per site requirement

Providing and making of end termination of the 16 mm sq. 2 core LT cable included thimbled, crimpped tapped, tested and connected as per site requirements

Providing, installing , testing and commissioning of LED Flood light fixture IP 66 powder coated as per following specification:- 1. Input voltage : 150 V to 270 V 2. System efficiency : Min 100 lumens/watt 3. Power factor : >0.90 4. Life expecting : 40,000 hours 5. No of hours usage / day : 10 to 12 hours/day 6. Rated watt : 100-110 W 7. Luminous flux : 10500 lumens 8. Colour Temperature : 6500 K with test certificate 9. Ingress protection : IP IP 66 as per IS/IEC60529-2001 with test certificate. 10. Colour rendering index : Ra > 75 11. Working Temperature : 0 deg to 50 deg 13. Average lighting/ beam angle : 120 to 160 deg 12. LED thermal management : LED shall be mounted on 14. System power efficiency : > 85 % 15. Luminary Casing : Pressure die cast Aluminum with toughened glass cover and water proof fixture.

R.R. Builders

Millinnem EnterPrises

M/s KASH ENGINEERS AND ASSOCIATES

M/S PEARL ENTERPRISES